o A hardware or software issue shuts off the scheduler-clock
interrupt on a CPU that is not in dyntick-idle mode. This
problem really has happened, and seems to be most likely to
- result in RCU CPU stall warnings for CONFIG_NO_HZ=n kernels.
+ result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels.
o A bug in the RCU implementation.
The sampling rate is limited by the HW transition latency:
transition_latency * 100
Or by kernel restrictions:
-If CONFIG_NO_HZ is set, the limit is 10ms fixed.
-If CONFIG_NO_HZ is not set or nohz=off boot parameter is used, the
+If CONFIG_NO_HZ_COMMON is set, the limit is 10ms fixed.
+If CONFIG_NO_HZ_COMMON is not set or nohz=off boot parameter is used, the
limits depend on the CONFIG_HZ option:
HZ=1000: min=20000us (20ms)
HZ=250: min=80000us (80ms)
Valid arguments: on, off
Default: on
+ nohz_full= [KNL,BOOT]
+ In kernels built with CONFIG_NO_HZ_FULL=y, set
+ the specified list of CPUs whose tick will be stopped
+ whenever possible. The boot CPU will be forced outside
+ the range to maintain the timekeeping.
+ The CPUs in this range must also be included in the
+ rcu_nocbs= set.
+
noiotrap [SH] Disables trapped I/O port accesses.
noirqdebug [X86-32] Disables the code which attempts to detect and
--- /dev/null
+ NO_HZ: Reducing Scheduling-Clock Ticks
+
+
+This document describes Kconfig options and boot parameters that can
+reduce the number of scheduling-clock interrupts, thereby improving energy
+efficiency and reducing OS jitter. Reducing OS jitter is important for
+some types of computationally intensive high-performance computing (HPC)
+applications and for real-time applications.
+
+There are two main contexts in which the number of scheduling-clock
+interrupts can be reduced compared to the old-school approach of sending
+a scheduling-clock interrupt to all CPUs every jiffy whether they need
+it or not (CONFIG_HZ_PERIODIC=y or CONFIG_NO_HZ=n for older kernels):
+
+1. Idle CPUs (CONFIG_NO_HZ_IDLE=y or CONFIG_NO_HZ=y for older kernels).
+
+2. CPUs having only one runnable task (CONFIG_NO_HZ_FULL=y).
+
+These two cases are described in the following two sections, followed
+by a third section on RCU-specific considerations and a fourth and final
+section listing known issues.
+
+
+IDLE CPUs
+
+If a CPU is idle, there is little point in sending it a scheduling-clock
+interrupt. After all, the primary purpose of a scheduling-clock interrupt
+is to force a busy CPU to shift its attention among multiple duties,
+and an idle CPU has no duties to shift its attention among.
+
+The CONFIG_NO_HZ_IDLE=y Kconfig option causes the kernel to avoid sending
+scheduling-clock interrupts to idle CPUs, which is critically important
+both to battery-powered devices and to highly virtualized mainframes.
+A battery-powered device running a CONFIG_HZ_PERIODIC=y kernel would
+drain its battery very quickly, easily 2-3 times as fast as would the
+same device running a CONFIG_NO_HZ_IDLE=y kernel. A mainframe running
+1,500 OS instances might find that half of its CPU time was consumed by
+unnecessary scheduling-clock interrupts. In these situations, there
+is strong motivation to avoid sending scheduling-clock interrupts to
+idle CPUs. That said, dyntick-idle mode is not free:
+
+1. It increases the number of instructions executed on the path
+ to and from the idle loop.
+
+2. On many architectures, dyntick-idle mode also increases the
+ number of expensive clock-reprogramming operations.
+
+Therefore, systems with aggressive real-time response constraints often
+run CONFIG_HZ_PERIODIC=y kernels (or CONFIG_NO_HZ=n for older kernels)
+in order to avoid degrading from-idle transition latencies.
+
+An idle CPU that is not receiving scheduling-clock interrupts is said to
+be "dyntick-idle", "in dyntick-idle mode", "in nohz mode", or "running
+tickless". The remainder of this document will use "dyntick-idle mode".
+
+There is also a boot parameter "nohz=" that can be used to disable
+dyntick-idle mode in CONFIG_NO_HZ_IDLE=y kernels by specifying "nohz=off".
+By default, CONFIG_NO_HZ_IDLE=y kernels boot with "nohz=on", enabling
+dyntick-idle mode.
+
+
+CPUs WITH ONLY ONE RUNNABLE TASK
+
+If a CPU has only one runnable task, there is little point in sending it
+a scheduling-clock interrupt because there is no other task to switch to.
+
+The CONFIG_NO_HZ_FULL=y Kconfig option causes the kernel to avoid
+sending scheduling-clock interrupts to CPUs with a single runnable task,
+and such CPUs are said to be "adaptive-ticks CPUs". This is important
+for applications with aggressive real-time response constraints because
+it allows them to improve their worst-case response times by the maximum
+duration of a scheduling-clock interrupt. It is also important for
+computationally intensive short-iteration workloads: If any CPU is
+delayed during a given iteration, all the other CPUs will be forced to
+wait idle while the delayed CPU finishes. Thus, the delay is multiplied
+by one less than the number of CPUs. In these situations, there is
+again strong motivation to avoid sending scheduling-clock interrupts.
+
+By default, no CPU will be an adaptive-ticks CPU. The "nohz_full="
+boot parameter specifies the adaptive-ticks CPUs. For example,
+"nohz_full=1,6-8" says that CPUs 1, 6, 7, and 8 are to be adaptive-ticks
+CPUs. Note that you are prohibited from marking all of the CPUs as
+adaptive-tick CPUs: At least one non-adaptive-tick CPU must remain
+online to handle timekeeping tasks in order to ensure that system calls
+like gettimeofday() returns accurate values on adaptive-tick CPUs.
+(This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no
+running user processes to observe slight drifts in clock rate.)
+Therefore, the boot CPU is prohibited from entering adaptive-ticks
+mode. Specifying a "nohz_full=" mask that includes the boot CPU will
+result in a boot-time error message, and the boot CPU will be removed
+from the mask.
+
+Alternatively, the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter specifies
+that all CPUs other than the boot CPU are adaptive-ticks CPUs. This
+Kconfig parameter will be overridden by the "nohz_full=" boot parameter,
+so that if both the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter and
+the "nohz_full=1" boot parameter is specified, the boot parameter will
+prevail so that only CPU 1 will be an adaptive-ticks CPU.
+
+Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
+This is covered in the "RCU IMPLICATIONS" section below.
+
+Normally, a CPU remains in adaptive-ticks mode as long as possible.
+In particular, transitioning to kernel mode does not automatically change
+the mode. Instead, the CPU will exit adaptive-ticks mode only if needed,
+for example, if that CPU enqueues an RCU callback.
+
+Just as with dyntick-idle mode, the benefits of adaptive-tick mode do
+not come for free:
+
+1. CONFIG_NO_HZ_FULL selects CONFIG_NO_HZ_COMMON, so you cannot run
+ adaptive ticks without also running dyntick idle. This dependency
+ extends down into the implementation, so that all of the costs
+ of CONFIG_NO_HZ_IDLE are also incurred by CONFIG_NO_HZ_FULL.
+
+2. The user/kernel transitions are slightly more expensive due
+ to the need to inform kernel subsystems (such as RCU) about
+ the change in mode.
+
+3. POSIX CPU timers on adaptive-tick CPUs may miss their deadlines
+ (perhaps indefinitely) because they currently rely on
+ scheduling-tick interrupts. This will likely be fixed in
+ one of two ways: (1) Prevent CPUs with POSIX CPU timers from
+ entering adaptive-tick mode, or (2) Use hrtimers or other
+ adaptive-ticks-immune mechanism to cause the POSIX CPU timer to
+ fire properly.
+
+4. If there are more perf events pending than the hardware can
+ accommodate, they are normally round-robined so as to collect
+ all of them over time. Adaptive-tick mode may prevent this
+ round-robining from happening. This will likely be fixed by
+ preventing CPUs with large numbers of perf events pending from
+ entering adaptive-tick mode.
+
+5. Scheduler statistics for adaptive-tick CPUs may be computed
+ slightly differently than those for non-adaptive-tick CPUs.
+ This might in turn perturb load-balancing of real-time tasks.
+
+6. The LB_BIAS scheduler feature is disabled by adaptive ticks.
+
+Although improvements are expected over time, adaptive ticks is quite
+useful for many types of real-time and compute-intensive applications.
+However, the drawbacks listed above mean that adaptive ticks should not
+(yet) be enabled by default.
+
+
+RCU IMPLICATIONS
+
+There are situations in which idle CPUs cannot be permitted to
+enter either dyntick-idle mode or adaptive-tick mode, the most
+common being when that CPU has RCU callbacks pending.
+
+The CONFIG_RCU_FAST_NO_HZ=y Kconfig option may be used to cause such CPUs
+to enter dyntick-idle mode or adaptive-tick mode anyway. In this case,
+a timer will awaken these CPUs every four jiffies in order to ensure
+that the RCU callbacks are processed in a timely fashion.
+
+Another approach is to offload RCU callback processing to "rcuo" kthreads
+using the CONFIG_RCU_NOCB_CPU=y Kconfig option. The specific CPUs to
+offload may be selected via several methods:
+
+1. One of three mutually exclusive Kconfig options specify a
+ build-time default for the CPUs to offload:
+
+ a. The CONFIG_RCU_NOCB_CPU_NONE=y Kconfig option results in
+ no CPUs being offloaded.
+
+ b. The CONFIG_RCU_NOCB_CPU_ZERO=y Kconfig option causes
+ CPU 0 to be offloaded.
+
+ c. The CONFIG_RCU_NOCB_CPU_ALL=y Kconfig option causes all
+ CPUs to be offloaded. Note that the callbacks will be
+ offloaded to "rcuo" kthreads, and that those kthreads
+ will in fact run on some CPU. However, this approach
+ gives fine-grained control on exactly which CPUs the
+ callbacks run on, along with their scheduling priority
+ (including the default of SCHED_OTHER), and it further
+ allows this control to be varied dynamically at runtime.
+
+2. The "rcu_nocbs=" kernel boot parameter, which takes a comma-separated
+ list of CPUs and CPU ranges, for example, "1,3-5" selects CPUs 1,
+ 3, 4, and 5. The specified CPUs will be offloaded in addition to
+ any CPUs specified as offloaded by CONFIG_RCU_NOCB_CPU_ZERO=y or
+ CONFIG_RCU_NOCB_CPU_ALL=y. This means that the "rcu_nocbs=" boot
+ parameter has no effect for kernels built with RCU_NOCB_CPU_ALL=y.
+
+The offloaded CPUs will never queue RCU callbacks, and therefore RCU
+never prevents offloaded CPUs from entering either dyntick-idle mode
+or adaptive-tick mode. That said, note that it is up to userspace to
+pin the "rcuo" kthreads to specific CPUs if desired. Otherwise, the
+scheduler will decide where to run them, which might or might not be
+where you want them to run.
+
+
+KNOWN ISSUES
+
+o Dyntick-idle slows transitions to and from idle slightly.
+ In practice, this has not been a problem except for the most
+ aggressive real-time workloads, which have the option of disabling
+ dyntick-idle mode, an option that most of them take. However,
+ some workloads will no doubt want to use adaptive ticks to
+ eliminate scheduling-clock interrupt latencies. Here are some
+ options for these workloads:
+
+ a. Use PMQOS from userspace to inform the kernel of your
+ latency requirements (preferred).
+
+ b. On x86 systems, use the "idle=mwait" boot parameter.
+
+ c. On x86 systems, use the "intel_idle.max_cstate=" to limit
+ ` the maximum C-state depth.
+
+ d. On x86 systems, use the "idle=poll" boot parameter.
+ However, please note that use of this parameter can cause
+ your CPU to overheat, which may cause thermal throttling
+ to degrade your latencies -- and that this degradation can
+ be even worse than that of dyntick-idle. Furthermore,
+ this parameter effectively disables Turbo Mode on Intel
+ CPUs, which can significantly reduce maximum performance.
+
+o Adaptive-ticks slows user/kernel transitions slightly.
+ This is not expected to be a problem for computationally intensive
+ workloads, which have few such transitions. Careful benchmarking
+ will be required to determine whether or not other workloads
+ are significantly affected by this effect.
+
+o Adaptive-ticks does not do anything unless there is only one
+ runnable task for a given CPU, even though there are a number
+ of other situations where the scheduling-clock tick is not
+ needed. To give but one example, consider a CPU that has one
+ runnable high-priority SCHED_FIFO task and an arbitrary number
+ of low-priority SCHED_OTHER tasks. In this case, the CPU is
+ required to run the SCHED_FIFO task until it either blocks or
+ some other higher-priority task awakens on (or is assigned to)
+ this CPU, so there is no point in sending a scheduling-clock
+ interrupt to this CPU. However, the current implementation
+ nevertheless sends scheduling-clock interrupts to CPUs having a
+ single runnable SCHED_FIFO task and multiple runnable SCHED_OTHER
+ tasks, even though these interrupts are unnecessary.
+
+ Better handling of these sorts of situations is future work.
+
+o A reboot is required to reconfigure both adaptive idle and RCU
+ callback offloading. Runtime reconfiguration could be provided
+ if needed, however, due to the complexity of reconfiguring RCU at
+ runtime, there would need to be an earthshakingly good reason.
+ Especially given that you have the straightforward option of
+ simply offloading RCU callbacks from all CPUs and pinning them
+ where you want them whenever you want them pinned.
+
+o Additional configuration is required to deal with other sources
+ of OS jitter, including interrupts and system-utility tasks
+ and processes. This configuration normally involves binding
+ interrupts and tasks to particular CPUs.
+
+o Some sources of OS jitter can currently be eliminated only by
+ constraining the workload. For example, the only way to eliminate
+ OS jitter due to global TLB shootdowns is to avoid the unmapping
+ operations (such as kernel module unload operations) that
+ result in these shootdowns. For another example, page faults
+ and TLB misses can be reduced (and in some cases eliminated) by
+ using huge pages and by constraining the amount of memory used
+ by the application. Pre-faulting the working set can also be
+ helpful, especially when combined with the mlock() and mlockall()
+ system calls.
+
+o Unless all CPUs are idle, at least one CPU must keep the
+ scheduling-clock interrupt going in order to support accurate
+ timekeeping.
+
+o If there are adaptive-ticks CPUs, there will be at least one
+ CPU keeping the scheduling-clock interrupt going, even if all
+ CPUs are otherwise idle.
#ifdef CONFIG_PRINTK
DEFINE(UML_CONFIG_PRINTK, CONFIG_PRINTK);
#endif
-#ifdef CONFIG_NO_HZ
-DEFINE(UML_CONFIG_NO_HZ, CONFIG_NO_HZ);
+#ifdef CONFIG_NO_HZ_COMMON
+DEFINE(UML_CONFIG_NO_HZ_COMMON, CONFIG_NO_HZ_COMMON);
#endif
#ifdef CONFIG_UML_X86
DEFINE(UML_CONFIG_UML_X86, CONFIG_UML_X86);
return timeval_to_ns(&tv);
}
-#ifdef UML_CONFIG_NO_HZ
+#ifdef UML_CONFIG_NO_HZ_COMMON
static int after_sleep_interval(struct timespec *ts)
{
return 0;
#ifndef _ASM_GENERIC_CPUTIME_NSECS_H
#define _ASM_GENERIC_CPUTIME_NSECS_H
+#include <linux/math64.h>
+
typedef u64 __nocast cputime_t;
typedef u64 __nocast cputime64_t;
#define cputime_one_jiffy jiffies_to_cputime(1)
+#define cputime_div(__ct, divisor) div_u64((__force u64)__ct, divisor)
+#define cputime_div_rem(__ct, divisor, remainder) \
+ div_u64_rem((__force u64)__ct, divisor, remainder);
+
/*
* Convert cputime <-> jiffies (HZ)
*/
#define cputime_to_jiffies(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+ cputime_div(__ct, NSEC_PER_SEC / HZ)
#define cputime_to_scaled(__ct) (__ct)
#define jiffies_to_cputime(__jif) \
(__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
#define cputime64_to_jiffies64(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+ cputime_div(__ct, NSEC_PER_SEC / HZ)
#define jiffies64_to_cputime64(__jif) \
(__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
* Convert cputime <-> microseconds
*/
#define cputime_to_usecs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_USEC)
+ cputime_div(__ct, NSEC_PER_USEC)
#define usecs_to_cputime(__usecs) \
(__force cputime_t)((__usecs) * NSEC_PER_USEC)
#define usecs_to_cputime64(__usecs) \
* Convert cputime <-> seconds
*/
#define cputime_to_secs(__ct) \
- ((__force u64)(__ct) / NSEC_PER_SEC)
+ cputime_div(__ct, NSEC_PER_SEC)
#define secs_to_cputime(__secs) \
(__force cputime_t)((__secs) * NSEC_PER_SEC)
}
static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
+ u32 rem;
+
+ val->tv_sec = cputime_div_rem(ct, NSEC_PER_SEC, &rem);
+ val->tv_nsec = rem;
}
/*
}
static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
{
- val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
- val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+ u32 rem;
+
+ val->tv_sec = cputime_div_rem(ct, NSEC_PER_SEC, &rem);
+ val->tv_usec = rem / NSEC_PER_USEC;
}
/*
* Convert cputime <-> clock (USER_HZ)
*/
#define cputime_to_clock_t(__ct) \
- ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
+ cputime_div(__ct, (NSEC_PER_SEC / USER_HZ))
#define clock_t_to_cputime(__x) \
(__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
static inline void perf_event_task_tick(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_NO_HZ_FULL)
+extern bool perf_event_can_stop_tick(void);
+#else
+static inline bool perf_event_can_stop_tick(void) { return true; }
+#endif
+
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
extern void perf_restore_debug_store(void);
#else
void posix_cpu_timers_exit(struct task_struct *task);
void posix_cpu_timers_exit_group(struct task_struct *task);
+bool posix_cpu_timers_can_stop_tick(struct task_struct *tsk);
+
void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,
cputime_t *newval, cputime_t *oldval);
#define kfree_rcu(ptr, rcu_head) \
__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
+#ifdef CONFIG_RCU_NOCB_CPU
+extern bool rcu_is_nocb_cpu(int cpu);
+#else
+static inline bool rcu_is_nocb_cpu(int cpu) { return false; }
+#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
+
+
#endif /* __LINUX_RCUPDATE_H */
extern int runqueue_is_locked(int cpu);
-#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
extern void nohz_balance_enter_idle(int cpu);
extern void set_cpu_sd_state_idle(void);
extern int get_nohz_timer_target(void);
}
#endif
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
void calc_load_enter_idle(void);
void calc_load_exit_idle(void);
#else
static inline void calc_load_enter_idle(void) { }
static inline void calc_load_exit_idle(void) { }
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
static inline void idle_task_exit(void) {}
#endif
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
-extern void wake_up_idle_cpu(int cpu);
+#if defined(CONFIG_NO_HZ_COMMON) && defined(CONFIG_SMP)
+extern void wake_up_nohz_cpu(int cpu);
#else
-static inline void wake_up_idle_cpu(int cpu) { }
+static inline void wake_up_nohz_cpu(int cpu) { }
+#endif
+
+#ifdef CONFIG_NO_HZ_FULL
+extern bool sched_can_stop_tick(void);
+#else
+static inline bool sched_can_stop_tick(void) { return false; }
#endif
#ifdef CONFIG_SCHED_AUTOGROUP
extern void tick_setup_sched_timer(void);
# endif
-# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
+# if defined CONFIG_NO_HZ_COMMON || defined CONFIG_HIGH_RES_TIMERS
extern void tick_cancel_sched_timer(int cpu);
# else
static inline void tick_cancel_sched_timer(int cpu) { }
static inline int tick_oneshot_mode_active(void) { return 0; }
#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
-# ifdef CONFIG_NO_HZ
+# ifdef CONFIG_NO_HZ_COMMON
DECLARE_PER_CPU(struct tick_sched, tick_cpu_sched);
static inline int tick_nohz_tick_stopped(void)
extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time);
-# else /* !CONFIG_NO_HZ */
+# else /* !CONFIG_NO_HZ_COMMON */
static inline int tick_nohz_tick_stopped(void)
{
return 0;
}
static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; }
static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
-# endif /* !NO_HZ */
+# endif /* !CONFIG_NO_HZ_COMMON */
+
+#ifdef CONFIG_NO_HZ_FULL
+extern void tick_nohz_init(void);
+extern int tick_nohz_full_cpu(int cpu);
+extern void tick_nohz_full_check(void);
+extern void tick_nohz_full_kick(void);
+extern void tick_nohz_full_kick_all(void);
+extern void tick_nohz_task_switch(struct task_struct *tsk);
+#else
+static inline void tick_nohz_init(void) { }
+static inline int tick_nohz_full_cpu(int cpu) { return 0; }
+static inline void tick_nohz_full_check(void) { }
+static inline void tick_nohz_full_kick(void) { }
+static inline void tick_nohz_full_kick_all(void) { }
+static inline void tick_nohz_task_switch(struct task_struct *tsk) { }
+#endif
+
# ifdef CONFIG_CPU_IDLE_GOV_MENU
extern void menu_hrtimer_cancel(void);
(int) __entry->pid, (unsigned long long)__entry->now)
);
+#ifdef CONFIG_NO_HZ_COMMON
+TRACE_EVENT(tick_stop,
+
+ TP_PROTO(int success, char *error_msg),
+
+ TP_ARGS(success, error_msg),
+
+ TP_STRUCT__entry(
+ __field( int , success )
+ __string( msg, error_msg )
+ ),
+
+ TP_fast_assign(
+ __entry->success = success;
+ __assign_str(msg, error_msg);
+ ),
+
+ TP_printk("success=%s msg=%s", __entry->success ? "yes" : "no", __get_str(msg))
+);
+#endif
+
#endif /* _TRACE_TIMER_H */
/* This part must be outside protection */
# Kind of a stub config for the pure tick based cputime accounting
config TICK_CPU_ACCOUNTING
bool "Simple tick based cputime accounting"
- depends on !S390
+ depends on !S390 && !NO_HZ_FULL
help
This is the basic tick based cputime accounting that maintains
statistics about user, system and idle time spent on per jiffies
config VIRT_CPU_ACCOUNTING_NATIVE
bool "Deterministic task and CPU time accounting"
- depends on HAVE_VIRT_CPU_ACCOUNTING
+ depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
select VIRT_CPU_ACCOUNTING
help
Select this option to enable more accurate task and CPU time
config IRQ_TIME_ACCOUNTING
bool "Fine granularity task level IRQ time accounting"
- depends on HAVE_IRQ_TIME_ACCOUNTING
+ depends on HAVE_IRQ_TIME_ACCOUNTING && !NO_HZ_FULL
help
Select this option to enable fine granularity task irq time
accounting. This is done by reading a timestamp on each
config RCU_FAST_NO_HZ
bool "Accelerate last non-dyntick-idle CPU's grace periods"
- depends on NO_HZ && SMP
+ depends on NO_HZ_COMMON && SMP
default n
help
This option permits CPUs to enter dynticks-idle state even if
idr_init_cache();
perf_event_init();
rcu_init();
+ tick_nohz_init();
radix_tree_init();
/* init some links before init_ISA_irqs() */
early_irq_init();
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/hash.h>
+#include <linux/tick.h>
#include <linux/sysfs.h>
#include <linux/dcache.h>
#include <linux/percpu.h>
WARN_ON(!irqs_disabled());
- if (list_empty(&cpuctx->rotation_list))
+ if (list_empty(&cpuctx->rotation_list)) {
+ int was_empty = list_empty(head);
list_add(&cpuctx->rotation_list, head);
+ if (was_empty)
+ tick_nohz_full_kick();
+ }
}
static void get_ctx(struct perf_event_context *ctx)
list_del_init(&cpuctx->rotation_list);
}
+#ifdef CONFIG_NO_HZ_FULL
+bool perf_event_can_stop_tick(void)
+{
+ if (list_empty(&__get_cpu_var(rotation_list)))
+ return true;
+ else
+ return false;
+}
+#endif
+
void perf_event_task_tick(void)
{
struct list_head *head = &__get_cpu_var(rotation_list);
*/
static int hrtimer_get_target(int this_cpu, int pinned)
{
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
return get_nohz_timer_target();
#endif
}
EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/**
* hrtimer_get_next_event - get the time until next expiry event
*
#include <linux/kernel_stat.h>
#include <trace/events/timer.h>
#include <linux/random.h>
+#include <linux/tick.h>
+#include <linux/workqueue.h>
/*
* Called after updating RLIMIT_CPU to run cpu timer and update
}
}
+/**
+ * task_cputime_zero - Check a task_cputime struct for all zero fields.
+ *
+ * @cputime: The struct to compare.
+ *
+ * Checks @cputime to see if all fields are zero. Returns true if all fields
+ * are zero, false if any field is nonzero.
+ */
+static inline int task_cputime_zero(const struct task_cputime *cputime)
+{
+ if (!cputime->utime && !cputime->stime && !cputime->sum_exec_runtime)
+ return 1;
+ return 0;
+}
+
static inline cputime_t prof_ticks(struct task_struct *p)
{
cputime_t utime, stime;
return 0;
}
+#ifdef CONFIG_NO_HZ_FULL
+static void nohz_kick_work_fn(struct work_struct *work)
+{
+ tick_nohz_full_kick_all();
+}
+
+static DECLARE_WORK(nohz_kick_work, nohz_kick_work_fn);
+
+/*
+ * We need the IPIs to be sent from sane process context.
+ * The posix cpu timers are always set with irqs disabled.
+ */
+static void posix_cpu_timer_kick_nohz(void)
+{
+ schedule_work(&nohz_kick_work);
+}
+
+bool posix_cpu_timers_can_stop_tick(struct task_struct *tsk)
+{
+ if (!task_cputime_zero(&tsk->cputime_expires))
+ return false;
+
+ if (tsk->signal->cputimer.running)
+ return false;
+
+ return true;
+}
+#else
+static inline void posix_cpu_timer_kick_nohz(void) { }
+#endif
+
/*
* Guts of sys_timer_settime for CPU timers.
* This is called with the timer locked and interrupts disabled.
sample_to_timespec(timer->it_clock,
old_incr, &old->it_interval);
}
+ if (!ret)
+ posix_cpu_timer_kick_nohz();
return ret;
}
}
}
-/**
- * task_cputime_zero - Check a task_cputime struct for all zero fields.
- *
- * @cputime: The struct to compare.
- *
- * Checks @cputime to see if all fields are zero. Returns true if all fields
- * are zero, false if any field is nonzero.
- */
-static inline int task_cputime_zero(const struct task_cputime *cputime)
-{
- if (!cputime->utime && !cputime->stime && !cputime->sum_exec_runtime)
- return 1;
- return 0;
-}
-
/*
* Check for any per-thread CPU timers that have fired and move them
* off the tsk->*_timers list onto the firing list. Per-thread timers
cpu_timer_fire(timer);
spin_unlock(&timer->it_lock);
}
+
+ /*
+ * In case some timers were rescheduled after the queue got emptied,
+ * wake up full dynticks CPUs.
+ */
+ if (tsk->signal->cputimer.running)
+ posix_cpu_timer_kick_nohz();
}
/*
}
if (!*newval)
- return;
+ goto out;
*newval += now.cpu;
}
tsk->signal->cputime_expires.virt_exp = *newval;
break;
}
+out:
+ posix_cpu_timer_kick_nohz();
}
static int do_cpu_nanosleep(const clockid_t which_clock, int flags,
rdp->offline_fqs++;
return 1;
}
+
+ /*
+ * There is a possibility that a CPU in adaptive-ticks state
+ * might run in the kernel with the scheduling-clock tick disabled
+ * for an extended time period. Invoke rcu_kick_nohz_cpu() to
+ * force the CPU to restart the scheduling-clock tick in this
+ * CPU is in this state.
+ */
+ rcu_kick_nohz_cpu(rdp->cpu);
+
return 0;
}
struct rcu_node *rnp, struct rcu_data *rdp)
{
/* No-CBs CPUs do not have orphanable callbacks. */
- if (is_nocb_cpu(rdp->cpu))
+ if (rcu_is_nocb_cpu(rdp->cpu))
return;
/*
* corresponding CPU's preceding callbacks have been invoked.
*/
for_each_possible_cpu(cpu) {
- if (!cpu_online(cpu) && !is_nocb_cpu(cpu))
+ if (!cpu_online(cpu) && !rcu_is_nocb_cpu(cpu))
continue;
rdp = per_cpu_ptr(rsp->rda, cpu);
- if (is_nocb_cpu(cpu)) {
+ if (rcu_is_nocb_cpu(cpu)) {
_rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
rsp->n_barrier_done);
atomic_inc(&rsp->barrier_cpu_count);
static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq);
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp);
static void rcu_init_one_nocb(struct rcu_node *rnp);
-static bool is_nocb_cpu(int cpu);
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy);
static bool rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp,
struct rcu_data *rdp);
static void rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp);
static void rcu_spawn_nocb_kthreads(struct rcu_state *rsp);
+static void rcu_kick_nohz_cpu(int cpu);
static bool init_nocb_callback_list(struct rcu_data *rdp);
#endif /* #ifndef RCU_TREE_NONCORE */
#include <linux/gfp.h>
#include <linux/oom.h>
#include <linux/smpboot.h>
+#include <linux/tick.h>
#define RCU_KTHREAD_PRIO 1
}
/* Is the specified CPU a no-CPUs CPU? */
-static bool is_nocb_cpu(int cpu)
+bool rcu_is_nocb_cpu(int cpu)
{
if (have_rcu_nocb_mask)
return cpumask_test_cpu(cpu, rcu_nocb_mask);
bool lazy)
{
- if (!is_nocb_cpu(rdp->cpu))
+ if (!rcu_is_nocb_cpu(rdp->cpu))
return 0;
__call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy);
if (__is_kfree_rcu_offset((unsigned long)rhp->func))
long qll = rsp->qlen_lazy;
/* If this is not a no-CBs CPU, tell the caller to do it the old way. */
- if (!is_nocb_cpu(smp_processor_id()))
+ if (!rcu_is_nocb_cpu(smp_processor_id()))
return 0;
rsp->qlen = 0;
rsp->qlen_lazy = 0;
{
}
-static bool is_nocb_cpu(int cpu)
-{
- return false;
-}
-
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy)
{
}
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
+
+/*
+ * An adaptive-ticks CPU can potentially execute in kernel mode for an
+ * arbitrarily long period of time with the scheduling-clock tick turned
+ * off. RCU will be paying attention to this CPU because it is in the
+ * kernel, but the CPU cannot be guaranteed to be executing the RCU state
+ * machine because the scheduling-clock tick has been disabled. Therefore,
+ * if an adaptive-ticks CPU is failing to respond to the current grace
+ * period and has not be idle from an RCU perspective, kick it.
+ */
+static void rcu_kick_nohz_cpu(int cpu)
+{
+#ifdef CONFIG_NO_HZ_FULL
+ if (tick_nohz_full_cpu(cpu))
+ smp_send_reschedule(cpu);
+#endif /* #ifdef CONFIG_NO_HZ_FULL */
+}
raw_spin_unlock_irqrestore(&rq->lock, flags);
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* In the semi idle case, use the nearest busy cpu for migrating timers
* from an idle cpu. This is good for power-savings.
* account when the CPU goes back to idle and evaluates the timer
* wheel for the next timer event.
*/
-void wake_up_idle_cpu(int cpu)
+static void wake_up_idle_cpu(int cpu)
{
struct rq *rq = cpu_rq(cpu);
smp_send_reschedule(cpu);
}
+static bool wake_up_full_nohz_cpu(int cpu)
+{
+ if (tick_nohz_full_cpu(cpu)) {
+ if (cpu != smp_processor_id() ||
+ tick_nohz_tick_stopped())
+ smp_send_reschedule(cpu);
+ return true;
+ }
+
+ return false;
+}
+
+void wake_up_nohz_cpu(int cpu)
+{
+ if (!wake_up_full_nohz_cpu(cpu))
+ wake_up_idle_cpu(cpu);
+}
+
static inline bool got_nohz_idle_kick(void)
{
int cpu = smp_processor_id();
return idle_cpu(cpu) && test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu));
}
-#else /* CONFIG_NO_HZ */
+#else /* CONFIG_NO_HZ_COMMON */
static inline bool got_nohz_idle_kick(void)
{
return false;
}
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
+
+#ifdef CONFIG_NO_HZ_FULL
+bool sched_can_stop_tick(void)
+{
+ struct rq *rq;
+
+ rq = this_rq();
+
+ /* Make sure rq->nr_running update is visible after the IPI */
+ smp_rmb();
+
+ /* More than one running task need preemption */
+ if (rq->nr_running > 1)
+ return false;
+
+ return true;
+}
+#endif /* CONFIG_NO_HZ_FULL */
void sched_avg_update(struct rq *rq)
{
void scheduler_ipi(void)
{
- if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick())
+ if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick()
+ && !tick_nohz_full_cpu(smp_processor_id()))
return;
/*
* somewhat pessimize the simple resched case.
*/
irq_enter();
+ tick_nohz_full_check();
sched_ttwu_pending();
/*
kprobe_flush_task(prev);
put_task_struct(prev);
}
+
+ tick_nohz_task_switch(current);
}
#ifdef CONFIG_SMP
return load >> FSHIFT;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* Handle NO_HZ for the global load-average.
*
smp_wmb();
calc_load_idx++;
}
-#else /* !CONFIG_NO_HZ */
+#else /* !CONFIG_NO_HZ_COMMON */
static inline long calc_load_fold_idle(void) { return 0; }
static inline void calc_global_nohz(void) { }
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
sched_avg_update(this_rq);
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* There is no sane way to deal with nohz on smp when using jiffies because the
* cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
}
raw_spin_unlock(&this_rq->lock);
}
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
/*
* Called from scheduler_tick()
INIT_LIST_HEAD(&rq->cfs_tasks);
rq_attach_root(rq, &def_root_domain);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
rq->nohz_flags = 0;
#endif
#endif
return 0;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* idle load balancing details
* - When one of the busy CPUs notice that there may be an idle rebalancing
rq->next_balance = next_balance;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
- * In CONFIG_NO_HZ case, the idle balance kickee will do the
+ * In CONFIG_NO_HZ_COMMON case, the idle balance kickee will do the
* rebalancing for all the cpus for whom scheduler ticks are stopped.
*/
static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle)
if (time_after_eq(jiffies, rq->next_balance) &&
likely(!on_null_domain(cpu)))
raise_softirq(SCHED_SOFTIRQ);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
if (nohz_kick_needed(rq, cpu) && likely(!on_null_domain(cpu)))
nohz_balancer_kick(cpu);
#endif
#ifdef CONFIG_SMP
open_softirq(SCHED_SOFTIRQ, run_rebalance_domains);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
nohz.next_balance = jiffies;
zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
cpu_notifier(sched_ilb_notifier, 0);
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/stop_machine.h>
+#include <linux/tick.h>
#include "cpupri.h"
#include "cpuacct.h"
#define CPU_LOAD_IDX_MAX 5
unsigned long cpu_load[CPU_LOAD_IDX_MAX];
unsigned long last_load_update_tick;
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
u64 nohz_stamp;
unsigned long nohz_flags;
#endif
static inline void inc_nr_running(struct rq *rq)
{
rq->nr_running++;
+
+#ifdef CONFIG_NO_HZ_FULL
+ if (rq->nr_running == 2) {
+ if (tick_nohz_full_cpu(rq->cpu)) {
+ /* Order rq->nr_running write against the IPI */
+ smp_wmb();
+ smp_send_reschedule(rq->cpu);
+ }
+ }
+#endif
}
static inline void dec_nr_running(struct rq *rq)
extern void account_cfs_bandwidth_used(int enabled, int was_enabled);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
enum rq_nohz_flag_bits {
NOHZ_TICK_STOPPED,
NOHZ_BALANCE_KICK,
wakeup_softirqd();
}
+static inline void tick_irq_exit(void)
+{
+#ifdef CONFIG_NO_HZ_COMMON
+ int cpu = smp_processor_id();
+
+ /* Make sure that timer wheel updates are propagated */
+ if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) {
+ if (!in_interrupt())
+ tick_nohz_irq_exit();
+ }
+#endif
+}
+
/*
* Exit an interrupt context. Process softirqs if needed and possible:
*/
if (!in_interrupt() && local_softirq_pending())
invoke_softirq();
-#ifdef CONFIG_NO_HZ
- /* Make sure that timer wheel updates are propagated */
- if (idle_cpu(smp_processor_id()) && !in_interrupt() && !need_resched())
- tick_nohz_irq_exit();
-#endif
+ tick_irq_exit();
rcu_irq_exit();
}
if GENERIC_CLOCKEVENTS
menu "Timers subsystem"
-# Core internal switch. Selected by NO_HZ / HIGH_RES_TIMERS. This is
+# Core internal switch. Selected by NO_HZ_COMMON / HIGH_RES_TIMERS. This is
# only related to the tick functionality. Oneshot clockevent devices
# are supported independ of this.
config TICK_ONESHOT
bool
-config NO_HZ
- bool "Tickless System (Dynamic Ticks)"
+config NO_HZ_COMMON
+ bool
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
+
+choice
+ prompt "Timer tick handling"
+ default NO_HZ_IDLE if NO_HZ
+
+config HZ_PERIODIC
+ bool "Periodic timer ticks (constant rate, no dynticks)"
+ help
+ This option keeps the tick running periodically at a constant
+ rate, even when the CPU doesn't need it.
+
+config NO_HZ_IDLE
+ bool "Idle dynticks system (tickless idle)"
+ depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
+ select NO_HZ_COMMON
+ help
+ This option enables a tickless idle system: timer interrupts
+ will only trigger on an as-needed basis when the system is idle.
+ This is usually interesting for energy saving.
+
+ Most of the time you want to say Y here.
+
+config NO_HZ_FULL
+ bool "Full dynticks system (tickless)"
+ # NO_HZ_COMMON dependency
+ depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
+ # We need at least one periodic CPU for timekeeping
+ depends on SMP
+ # RCU_USER_QS dependency
+ depends on HAVE_CONTEXT_TRACKING
+ # VIRT_CPU_ACCOUNTING_GEN dependency
+ depends on 64BIT
+ select NO_HZ_COMMON
+ select RCU_USER_QS
+ select RCU_NOCB_CPU
+ select RCU_NOCB_CPU_ALL
+ select VIRT_CPU_ACCOUNTING_GEN
+ select CONTEXT_TRACKING_FORCE
+ select IRQ_WORK
+ help
+ Adaptively try to shutdown the tick whenever possible, even when
+ the CPU is running tasks. Typically this requires running a single
+ task on the CPU. Chances for running tickless are maximized when
+ the task mostly runs in userspace and has few kernel activity.
+
+ You need to fill up the nohz_full boot parameter with the
+ desired range of dynticks CPUs.
+
+ This is implemented at the expense of some overhead in user <-> kernel
+ transitions: syscalls, exceptions and interrupts. Even when it's
+ dynamically off.
+
+ Say N.
+
+endchoice
+
+config NO_HZ_FULL_ALL
+ bool "Full dynticks system on all CPUs by default"
+ depends on NO_HZ_FULL
+ help
+ If the user doesn't pass the nohz_full boot option to
+ define the range of full dynticks CPUs, consider that all
+ CPUs in the system are full dynticks by default.
+ Note the boot CPU will still be kept outside the range to
+ handle the timekeeping duty.
+
+config NO_HZ
+ bool "Old Idle dynticks config"
+ depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
- This option enables a tickless system: timer interrupts will
- only trigger on an as-needed basis both when the system is
- busy and when the system is idle.
+ This is the old config entry that enables dynticks idle.
+ We keep it around for a little while to enforce backward
+ compatibility with older config files.
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
bc->event_handler = tick_handle_oneshot_broadcast;
/* Take the do_timer update */
- tick_do_timer_cpu = cpu;
+ if (!tick_nohz_full_cpu(cpu))
+ tick_do_timer_cpu = cpu;
/*
* We must be careful here. There might be other CPUs
* this cpu:
*/
if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) {
- tick_do_timer_cpu = cpu;
+ if (!tick_nohz_full_cpu(cpu))
+ tick_do_timer_cpu = cpu;
+ else
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
tick_next_period = ktime_get();
tick_period = ktime_set(0, NSEC_PER_SEC / HZ);
}
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/irq_work.h>
+#include <linux/posix-timers.h>
+#include <linux/perf_event.h>
#include <asm/irq_regs.h>
#include "tick-internal.h"
+#include <trace/events/timer.h>
+
/*
* Per cpu nohz control structure
*/
{
int cpu = smp_processor_id();
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* Check if the do_timer duty was dropped. We don't care about
* concurrency: This happens only when the cpu in charge went
* this duty, then the jiffies update is still serialized by
* jiffies_lock.
*/
- if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
+ if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)
+ && !tick_nohz_full_cpu(cpu))
tick_do_timer_cpu = cpu;
#endif
static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs)
{
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* When we are idle and the tick is stopped, we have to touch
* the watchdog as we might not schedule for a really long
profile_tick(CPU_PROFILING);
}
+#ifdef CONFIG_NO_HZ_FULL
+static cpumask_var_t nohz_full_mask;
+bool have_nohz_full_mask;
+
+static bool can_stop_full_tick(void)
+{
+ WARN_ON_ONCE(!irqs_disabled());
+
+ if (!sched_can_stop_tick()) {
+ trace_tick_stop(0, "more than 1 task in runqueue\n");
+ return false;
+ }
+
+ if (!posix_cpu_timers_can_stop_tick(current)) {
+ trace_tick_stop(0, "posix timers running\n");
+ return false;
+ }
+
+ if (!perf_event_can_stop_tick()) {
+ trace_tick_stop(0, "perf events running\n");
+ return false;
+ }
+
+ /* sched_clock_tick() needs us? */
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+ /*
+ * TODO: kick full dynticks CPUs when
+ * sched_clock_stable is set.
+ */
+ if (!sched_clock_stable) {
+ trace_tick_stop(0, "unstable sched clock\n");
+ return false;
+ }
+#endif
+
+ return true;
+}
+
+static void tick_nohz_restart_sched_tick(struct tick_sched *ts, ktime_t now);
+
+/*
+ * Re-evaluate the need for the tick on the current CPU
+ * and restart it if necessary.
+ */
+void tick_nohz_full_check(void)
+{
+ struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
+
+ if (tick_nohz_full_cpu(smp_processor_id())) {
+ if (ts->tick_stopped && !is_idle_task(current)) {
+ if (!can_stop_full_tick())
+ tick_nohz_restart_sched_tick(ts, ktime_get());
+ }
+ }
+}
+
+static void nohz_full_kick_work_func(struct irq_work *work)
+{
+ tick_nohz_full_check();
+}
+
+static DEFINE_PER_CPU(struct irq_work, nohz_full_kick_work) = {
+ .func = nohz_full_kick_work_func,
+};
+
+/*
+ * Kick the current CPU if it's full dynticks in order to force it to
+ * re-evaluate its dependency on the tick and restart it if necessary.
+ */
+void tick_nohz_full_kick(void)
+{
+ if (tick_nohz_full_cpu(smp_processor_id()))
+ irq_work_queue(&__get_cpu_var(nohz_full_kick_work));
+}
+
+static void nohz_full_kick_ipi(void *info)
+{
+ tick_nohz_full_check();
+}
+
+/*
+ * Kick all full dynticks CPUs in order to force these to re-evaluate
+ * their dependency on the tick and restart it if necessary.
+ */
+void tick_nohz_full_kick_all(void)
+{
+ if (!have_nohz_full_mask)
+ return;
+
+ preempt_disable();
+ smp_call_function_many(nohz_full_mask,
+ nohz_full_kick_ipi, NULL, false);
+ preempt_enable();
+}
+
+/*
+ * Re-evaluate the need for the tick as we switch the current task.
+ * It might need the tick due to per task/process properties:
+ * perf events, posix cpu timers, ...
+ */
+void tick_nohz_task_switch(struct task_struct *tsk)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!tick_nohz_full_cpu(smp_processor_id()))
+ goto out;
+
+ if (tick_nohz_tick_stopped() && !can_stop_full_tick())
+ tick_nohz_full_kick();
+
+out:
+ local_irq_restore(flags);
+}
+
+int tick_nohz_full_cpu(int cpu)
+{
+ if (!have_nohz_full_mask)
+ return 0;
+
+ return cpumask_test_cpu(cpu, nohz_full_mask);
+}
+
+/* Parse the boot-time nohz CPU list from the kernel parameters. */
+static int __init tick_nohz_full_setup(char *str)
+{
+ int cpu;
+
+ alloc_bootmem_cpumask_var(&nohz_full_mask);
+ if (cpulist_parse(str, nohz_full_mask) < 0) {
+ pr_warning("NOHZ: Incorrect nohz_full cpumask\n");
+ return 1;
+ }
+
+ cpu = smp_processor_id();
+ if (cpumask_test_cpu(cpu, nohz_full_mask)) {
+ pr_warning("NO_HZ: Clearing %d from nohz_full range for timekeeping\n", cpu);
+ cpumask_clear_cpu(cpu, nohz_full_mask);
+ }
+ have_nohz_full_mask = true;
+
+ return 1;
+}
+__setup("nohz_full=", tick_nohz_full_setup);
+
+static int __cpuinit tick_nohz_cpu_down_callback(struct notifier_block *nfb,
+ unsigned long action,
+ void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_PREPARE:
+ /*
+ * If we handle the timekeeping duty for full dynticks CPUs,
+ * we can't safely shutdown that CPU.
+ */
+ if (have_nohz_full_mask && tick_do_timer_cpu == cpu)
+ return -EINVAL;
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+/*
+ * Worst case string length in chunks of CPU range seems 2 steps
+ * separations: 0,2,4,6,...
+ * This is NR_CPUS + sizeof('\0')
+ */
+static char __initdata nohz_full_buf[NR_CPUS + 1];
+
+static int tick_nohz_init_all(void)
+{
+ int err = -1;
+
+#ifdef CONFIG_NO_HZ_FULL_ALL
+ if (!alloc_cpumask_var(&nohz_full_mask, GFP_KERNEL)) {
+ pr_err("NO_HZ: Can't allocate full dynticks cpumask\n");
+ return err;
+ }
+ err = 0;
+ cpumask_setall(nohz_full_mask);
+ cpumask_clear_cpu(smp_processor_id(), nohz_full_mask);
+ have_nohz_full_mask = true;
+#endif
+ return err;
+}
+
+void __init tick_nohz_init(void)
+{
+ int cpu;
+
+ if (!have_nohz_full_mask) {
+ if (tick_nohz_init_all() < 0)
+ return;
+ }
+
+ cpu_notifier(tick_nohz_cpu_down_callback, 0);
+
+ /* Make sure full dynticks CPU are also RCU nocbs */
+ for_each_cpu(cpu, nohz_full_mask) {
+ if (!rcu_is_nocb_cpu(cpu)) {
+ pr_warning("NO_HZ: CPU %d is not RCU nocb: "
+ "cleared from nohz_full range", cpu);
+ cpumask_clear_cpu(cpu, nohz_full_mask);
+ }
+ }
+
+ cpulist_scnprintf(nohz_full_buf, sizeof(nohz_full_buf), nohz_full_mask);
+ pr_info("NO_HZ: Full dynticks CPUs: %s.\n", nohz_full_buf);
+}
+#else
+#define have_nohz_full_mask (0)
+#endif
+
/*
* NOHZ - aka dynamic tick functionality
*/
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* NO HZ enabled ?
*/
delta_jiffies = rcu_delta_jiffies;
}
}
+
/*
- * Do not stop the tick, if we are only one off
- * or if the cpu is required for rcu
+ * Do not stop the tick, if we are only one off (or less)
+ * or if the cpu is required for RCU:
*/
- if (!ts->tick_stopped && delta_jiffies == 1)
+ if (!ts->tick_stopped && delta_jiffies <= 1)
goto out;
/* Schedule the tick, if we are at least one jiffie off */
ts->last_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
+ trace_tick_stop(1, " ");
}
/*
return ret;
}
+static void tick_nohz_full_stop_tick(struct tick_sched *ts)
+{
+#ifdef CONFIG_NO_HZ_FULL
+ int cpu = smp_processor_id();
+
+ if (!tick_nohz_full_cpu(cpu) || is_idle_task(current))
+ return;
+
+ if (!ts->tick_stopped && ts->nohz_mode == NOHZ_MODE_INACTIVE)
+ return;
+
+ if (!can_stop_full_tick())
+ return;
+
+ tick_nohz_stop_sched_tick(ts, ktime_get(), cpu);
+#endif
+}
+
static bool can_stop_idle_tick(int cpu, struct tick_sched *ts)
{
/*
return false;
}
+ if (have_nohz_full_mask) {
+ /*
+ * Keep the tick alive to guarantee timekeeping progression
+ * if there are full dynticks CPUs around
+ */
+ if (tick_do_timer_cpu == cpu)
+ return false;
+ /*
+ * Boot safety: make sure the timekeeping duty has been
+ * assigned before entering dyntick-idle mode,
+ */
+ if (tick_do_timer_cpu == TICK_DO_TIMER_NONE)
+ return false;
+ }
+
return true;
}
{
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
- if (!ts->inidle)
- return;
-
- /* Cancel the timer because CPU already waken up from the C-states*/
- menu_hrtimer_cancel();
- __tick_nohz_idle_enter(ts);
+ if (ts->inidle) {
+ /* Cancel the timer because CPU already waken up from the C-states*/
+ menu_hrtimer_cancel();
+ __tick_nohz_idle_enter(ts);
+ } else {
+ tick_nohz_full_stop_tick(ts);
+ }
}
/**
static inline void tick_nohz_switch_to_nohz(void) { }
static inline void tick_check_nohz(int cpu) { }
-#endif /* NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
/*
* Called from irq_enter to notify about the possible interruption of idle()
now = ktime_get();
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
if (tick_nohz_enabled)
ts->nohz_mode = NOHZ_MODE_HIGHRES;
#endif
}
#endif /* HIGH_RES_TIMERS */
-#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
+#if defined CONFIG_NO_HZ_COMMON || defined CONFIG_HIGH_RES_TIMERS
void tick_cancel_sched_timer(int cpu)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
cpu = smp_processor_id();
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+#if defined(CONFIG_NO_HZ_COMMON) && defined(CONFIG_SMP)
if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu))
cpu = get_nohz_timer_target();
#endif
debug_activate(timer, timer->expires);
internal_add_timer(base, timer);
/*
- * Check whether the other CPU is idle and needs to be
- * triggered to reevaluate the timer wheel when nohz is
- * active. We are protected against the other CPU fiddling
+ * Check whether the other CPU is in dynticks mode and needs
+ * to be triggered to reevaluate the timer wheel.
+ * We are protected against the other CPU fiddling
* with the timer by holding the timer base lock. This also
- * makes sure that a CPU on the way to idle can not evaluate
- * the timer wheel.
+ * makes sure that a CPU on the way to stop its tick can not
+ * evaluate the timer wheel.
*/
- wake_up_idle_cpu(cpu);
+ wake_up_nohz_cpu(cpu);
spin_unlock_irqrestore(&base->lock, flags);
}
EXPORT_SYMBOL_GPL(add_timer_on);
spin_unlock_irq(&base->lock);
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* Find out when the next timer event is due to happen. This
* is used on S/390 to stop all activity when a CPU is idle.
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff