Commit | Line | Data |
---|---|---|
f1407d5c KM |
1 | /* |
2 | * Renesas USB driver | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
15 | * | |
16 | */ | |
148e1134 | 17 | #include <linux/err.h> |
f1407d5c KM |
18 | #include <linux/io.h> |
19 | #include <linux/module.h> | |
20 | #include <linux/pm_runtime.h> | |
21 | #include <linux/slab.h> | |
22 | #include <linux/sysfs.h> | |
cc502bb7 | 23 | #include "common.h" |
f1407d5c | 24 | |
233f519d KM |
25 | /* |
26 | * image of renesas_usbhs | |
27 | * | |
28 | * ex) gadget case | |
29 | ||
30 | * mod.c | |
31 | * mod_gadget.c | |
32 | * mod_host.c pipe.c fifo.c | |
33 | * | |
34 | * +-------+ +-----------+ | |
35 | * | pipe0 |------>| fifo pio | | |
36 | * +------------+ +-------+ +-----------+ | |
37 | * | mod_gadget |=====> | pipe1 |--+ | |
38 | * +------------+ +-------+ | +-----------+ | |
39 | * | pipe2 | | +-| fifo dma0 | | |
40 | * +------------+ +-------+ | | +-----------+ | |
41 | * | mod_host | | pipe3 |<-|--+ | |
42 | * +------------+ +-------+ | +-----------+ | |
43 | * | .... | +--->| fifo dma1 | | |
44 | * | .... | +-----------+ | |
45 | */ | |
46 | ||
47 | ||
b002ff6e KM |
48 | #define USBHSF_RUNTIME_PWCTRL (1 << 0) |
49 | ||
50 | /* status */ | |
51 | #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) | |
52 | #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) | |
53 | #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) | |
54 | #define usbhsc_flags_has(p, b) ((p)->flags & (b)) | |
55 | ||
f1407d5c KM |
56 | /* |
57 | * platform call back | |
58 | * | |
59 | * renesas usb support platform callback function. | |
60 | * Below macro call it. | |
61 | * if platform doesn't have callback, it return 0 (no error) | |
62 | */ | |
63 | #define usbhs_platform_call(priv, func, args...)\ | |
64 | (!(priv) ? -ENODEV : \ | |
48298206 KM |
65 | !((priv)->pfunc.func) ? 0 : \ |
66 | (priv)->pfunc.func(args)) | |
f1407d5c KM |
67 | |
68 | /* | |
69 | * common functions | |
70 | */ | |
71 | u16 usbhs_read(struct usbhs_priv *priv, u32 reg) | |
72 | { | |
73 | return ioread16(priv->base + reg); | |
74 | } | |
75 | ||
76 | void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) | |
77 | { | |
78 | iowrite16(data, priv->base + reg); | |
79 | } | |
80 | ||
81 | void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) | |
82 | { | |
83 | u16 val = usbhs_read(priv, reg); | |
84 | ||
85 | val &= ~mask; | |
86 | val |= data & mask; | |
87 | ||
88 | usbhs_write(priv, reg, val); | |
89 | } | |
90 | ||
206dcc2c KM |
91 | struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) |
92 | { | |
93 | return dev_get_drvdata(&pdev->dev); | |
94 | } | |
95 | ||
f1407d5c KM |
96 | /* |
97 | * syscfg functions | |
98 | */ | |
76190152 | 99 | static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) |
f1407d5c KM |
100 | { |
101 | usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); | |
102 | } | |
103 | ||
f1407d5c KM |
104 | void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) |
105 | { | |
3244a7b4 KM |
106 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
107 | u16 val = DCFM | DRPD | HSE | USBE; | |
f427eb64 KM |
108 | int has_otg = usbhs_get_dparam(priv, has_otg); |
109 | ||
110 | if (has_otg) | |
111 | usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); | |
f1407d5c KM |
112 | |
113 | /* | |
114 | * if enable | |
115 | * | |
116 | * - select Host mode | |
117 | * - D+ Line/D- Line Pull-down | |
118 | */ | |
119 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
120 | } | |
121 | ||
122 | void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) | |
123 | { | |
3244a7b4 KM |
124 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
125 | u16 val = DPRPU | HSE | USBE; | |
f1407d5c KM |
126 | |
127 | /* | |
128 | * if enable | |
129 | * | |
130 | * - select Function mode | |
131 | * - D+ Line Pull-up | |
132 | */ | |
133 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
134 | } | |
135 | ||
4cd2f599 KM |
136 | void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable) |
137 | { | |
138 | usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0); | |
139 | } | |
140 | ||
dfbb7f4f KM |
141 | void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) |
142 | { | |
143 | usbhs_write(priv, TESTMODE, mode); | |
144 | } | |
145 | ||
f1407d5c KM |
146 | /* |
147 | * frame functions | |
148 | */ | |
149 | int usbhs_frame_get_num(struct usbhs_priv *priv) | |
150 | { | |
151 | return usbhs_read(priv, FRMNUM) & FRNM_MASK; | |
152 | } | |
153 | ||
ef8bedb9 KM |
154 | /* |
155 | * usb request functions | |
156 | */ | |
157 | void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
158 | { | |
159 | u16 val; | |
160 | ||
161 | val = usbhs_read(priv, USBREQ); | |
162 | req->bRequest = (val >> 8) & 0xFF; | |
163 | req->bRequestType = (val >> 0) & 0xFF; | |
164 | ||
165 | req->wValue = usbhs_read(priv, USBVAL); | |
166 | req->wIndex = usbhs_read(priv, USBINDX); | |
167 | req->wLength = usbhs_read(priv, USBLENG); | |
168 | } | |
169 | ||
170 | void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
171 | { | |
172 | usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); | |
173 | usbhs_write(priv, USBVAL, req->wValue); | |
174 | usbhs_write(priv, USBINDX, req->wIndex); | |
175 | usbhs_write(priv, USBLENG, req->wLength); | |
176 | ||
177 | usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); | |
178 | } | |
179 | ||
258485d9 KM |
180 | /* |
181 | * bus/vbus functions | |
182 | */ | |
183 | void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) | |
184 | { | |
a9be4a45 KM |
185 | u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); |
186 | ||
187 | if (status != USBRST) { | |
188 | struct device *dev = usbhs_priv_to_dev(priv); | |
189 | dev_err(dev, "usbhs should be reset\n"); | |
190 | } | |
191 | ||
258485d9 KM |
192 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); |
193 | } | |
194 | ||
195 | void usbhs_bus_send_reset(struct usbhs_priv *priv) | |
196 | { | |
197 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); | |
198 | } | |
199 | ||
75587f52 KM |
200 | int usbhs_bus_get_speed(struct usbhs_priv *priv) |
201 | { | |
202 | u16 dvstctr = usbhs_read(priv, DVSTCTR); | |
203 | ||
204 | switch (RHST & dvstctr) { | |
205 | case RHST_LOW_SPEED: | |
206 | return USB_SPEED_LOW; | |
207 | case RHST_FULL_SPEED: | |
208 | return USB_SPEED_FULL; | |
209 | case RHST_HIGH_SPEED: | |
210 | return USB_SPEED_HIGH; | |
211 | } | |
212 | ||
213 | return USB_SPEED_UNKNOWN; | |
214 | } | |
215 | ||
258485d9 KM |
216 | int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) |
217 | { | |
218 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
219 | ||
220 | return usbhs_platform_call(priv, set_vbus, pdev, enable); | |
221 | } | |
222 | ||
223 | static void usbhsc_bus_init(struct usbhs_priv *priv) | |
224 | { | |
225 | usbhs_write(priv, DVSTCTR, 0); | |
226 | ||
227 | usbhs_vbus_ctrl(priv, 0); | |
228 | } | |
229 | ||
eb05191f KM |
230 | /* |
231 | * device configuration | |
232 | */ | |
3dd49268 | 233 | int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, |
eb05191f KM |
234 | u16 upphub, u16 hubport, u16 speed) |
235 | { | |
236 | struct device *dev = usbhs_priv_to_dev(priv); | |
237 | u16 usbspd = 0; | |
238 | u32 reg = DEVADD0 + (2 * devnum); | |
239 | ||
240 | if (devnum > 10) { | |
241 | dev_err(dev, "cannot set speed to unknown device %d\n", devnum); | |
242 | return -EIO; | |
243 | } | |
244 | ||
245 | if (upphub > 0xA) { | |
246 | dev_err(dev, "unsupported hub number %d\n", upphub); | |
247 | return -EIO; | |
248 | } | |
249 | ||
250 | switch (speed) { | |
251 | case USB_SPEED_LOW: | |
252 | usbspd = USBSPD_SPEED_LOW; | |
253 | break; | |
254 | case USB_SPEED_FULL: | |
255 | usbspd = USBSPD_SPEED_FULL; | |
256 | break; | |
257 | case USB_SPEED_HIGH: | |
258 | usbspd = USBSPD_SPEED_HIGH; | |
259 | break; | |
260 | default: | |
261 | dev_err(dev, "unsupported speed %d\n", speed); | |
262 | return -EIO; | |
263 | } | |
264 | ||
265 | usbhs_write(priv, reg, UPPHUB(upphub) | | |
266 | HUBPORT(hubport)| | |
267 | USBSPD(usbspd)); | |
268 | ||
269 | return 0; | |
270 | } | |
271 | ||
f1407d5c KM |
272 | /* |
273 | * local functions | |
274 | */ | |
11935de5 | 275 | static void usbhsc_set_buswait(struct usbhs_priv *priv) |
f1407d5c KM |
276 | { |
277 | int wait = usbhs_get_dparam(priv, buswait_bwait); | |
f1407d5c | 278 | |
11935de5 KM |
279 | /* set bus wait if platform have */ |
280 | if (wait) | |
281 | usbhs_bset(priv, BUSWAIT, 0x000F, wait); | |
f1407d5c KM |
282 | } |
283 | ||
284 | /* | |
285 | * platform default param | |
286 | */ | |
287 | static u32 usbhsc_default_pipe_type[] = { | |
288 | USB_ENDPOINT_XFER_CONTROL, | |
289 | USB_ENDPOINT_XFER_ISOC, | |
290 | USB_ENDPOINT_XFER_ISOC, | |
291 | USB_ENDPOINT_XFER_BULK, | |
292 | USB_ENDPOINT_XFER_BULK, | |
293 | USB_ENDPOINT_XFER_BULK, | |
294 | USB_ENDPOINT_XFER_INT, | |
295 | USB_ENDPOINT_XFER_INT, | |
296 | USB_ENDPOINT_XFER_INT, | |
297 | USB_ENDPOINT_XFER_INT, | |
298 | }; | |
299 | ||
300 | /* | |
6e267da8 KM |
301 | * power control |
302 | */ | |
303 | static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) | |
304 | { | |
f1ee56a0 | 305 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
6e267da8 KM |
306 | struct device *dev = usbhs_priv_to_dev(priv); |
307 | ||
308 | if (enable) { | |
309 | /* enable PM */ | |
310 | pm_runtime_get_sync(dev); | |
311 | ||
f1ee56a0 KM |
312 | /* enable platform power */ |
313 | usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); | |
314 | ||
6e267da8 KM |
315 | /* USB on */ |
316 | usbhs_sys_clock_ctrl(priv, enable); | |
6e267da8 KM |
317 | } else { |
318 | /* USB off */ | |
6e267da8 KM |
319 | usbhs_sys_clock_ctrl(priv, enable); |
320 | ||
f1ee56a0 KM |
321 | /* disable platform power */ |
322 | usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); | |
323 | ||
6e267da8 KM |
324 | /* disable PM */ |
325 | pm_runtime_put_sync(dev); | |
326 | } | |
327 | } | |
328 | ||
329 | /* | |
ca8a282a | 330 | * hotplug |
f1407d5c | 331 | */ |
ca8a282a | 332 | static void usbhsc_hotplug(struct usbhs_priv *priv) |
f1407d5c | 333 | { |
f1407d5c KM |
334 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
335 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
336 | int id; | |
337 | int enable; | |
338 | int ret; | |
339 | ||
340 | /* | |
341 | * get vbus status from platform | |
342 | */ | |
343 | enable = usbhs_platform_call(priv, get_vbus, pdev); | |
344 | ||
345 | /* | |
346 | * get id from platform | |
347 | */ | |
348 | id = usbhs_platform_call(priv, get_id, pdev); | |
349 | ||
350 | if (enable && !mod) { | |
351 | ret = usbhs_mod_change(priv, id); | |
352 | if (ret < 0) | |
353 | return; | |
354 | ||
355 | dev_dbg(&pdev->dev, "%s enable\n", __func__); | |
356 | ||
6e267da8 | 357 | /* power on */ |
b002ff6e KM |
358 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
359 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c | 360 | |
258485d9 KM |
361 | /* bus init */ |
362 | usbhsc_set_buswait(priv); | |
363 | usbhsc_bus_init(priv); | |
364 | ||
f1407d5c KM |
365 | /* module start */ |
366 | usbhs_mod_call(priv, start, priv); | |
367 | ||
368 | } else if (!enable && mod) { | |
369 | dev_dbg(&pdev->dev, "%s disable\n", __func__); | |
370 | ||
371 | /* module stop */ | |
372 | usbhs_mod_call(priv, stop, priv); | |
373 | ||
258485d9 KM |
374 | /* bus init */ |
375 | usbhsc_bus_init(priv); | |
376 | ||
6e267da8 | 377 | /* power off */ |
b002ff6e KM |
378 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
379 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
380 | |
381 | usbhs_mod_change(priv, -1); | |
382 | ||
383 | /* reset phy for next connection */ | |
384 | usbhs_platform_call(priv, phy_reset, pdev); | |
385 | } | |
386 | } | |
387 | ||
ca8a282a KM |
388 | /* |
389 | * notify hotplug | |
390 | */ | |
391 | static void usbhsc_notify_hotplug(struct work_struct *work) | |
392 | { | |
393 | struct usbhs_priv *priv = container_of(work, | |
394 | struct usbhs_priv, | |
395 | notify_hotplug_work.work); | |
396 | usbhsc_hotplug(priv); | |
397 | } | |
398 | ||
b4fcea2a | 399 | static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) |
f1407d5c | 400 | { |
206dcc2c | 401 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
bc57381e | 402 | int delay = usbhs_get_dparam(priv, detection_delay); |
f1407d5c KM |
403 | |
404 | /* | |
405 | * This functions will be called in interrupt. | |
406 | * To make sure safety context, | |
407 | * use workqueue for usbhs_notify_hotplug | |
408 | */ | |
a49a88f1 KM |
409 | schedule_delayed_work(&priv->notify_hotplug_work, |
410 | msecs_to_jiffies(delay)); | |
f1407d5c KM |
411 | return 0; |
412 | } | |
413 | ||
414 | /* | |
415 | * platform functions | |
416 | */ | |
b7a8d17d | 417 | static int usbhs_probe(struct platform_device *pdev) |
f1407d5c KM |
418 | { |
419 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; | |
420 | struct renesas_usbhs_driver_callback *dfunc; | |
421 | struct usbhs_priv *priv; | |
53069af3 | 422 | struct resource *res, *irq_res; |
f1407d5c KM |
423 | int ret; |
424 | ||
425 | /* check platform information */ | |
426 | if (!info || | |
b002ff6e | 427 | !info->platform_callback.get_id) { |
f1407d5c KM |
428 | dev_err(&pdev->dev, "no platform information\n"); |
429 | return -EINVAL; | |
430 | } | |
431 | ||
432 | /* platform data */ | |
433 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
53069af3 SY |
434 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
435 | if (!res || !irq_res) { | |
f1407d5c KM |
436 | dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); |
437 | return -ENODEV; | |
438 | } | |
439 | ||
440 | /* usb private data */ | |
58efc77c | 441 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
f1407d5c KM |
442 | if (!priv) { |
443 | dev_err(&pdev->dev, "Could not allocate priv\n"); | |
444 | return -ENOMEM; | |
445 | } | |
446 | ||
148e1134 TR |
447 | priv->base = devm_ioremap_resource(&pdev->dev, res); |
448 | if (IS_ERR(priv->base)) | |
449 | return PTR_ERR(priv->base); | |
f1407d5c KM |
450 | |
451 | /* | |
452 | * care platform info | |
453 | */ | |
48298206 KM |
454 | memcpy(&priv->pfunc, |
455 | &info->platform_callback, | |
456 | sizeof(struct renesas_usbhs_platform_callback)); | |
457 | memcpy(&priv->dparam, | |
458 | &info->driver_param, | |
459 | sizeof(struct renesas_usbhs_driver_param)); | |
f1407d5c KM |
460 | |
461 | /* set driver callback functions for platform */ | |
462 | dfunc = &info->driver_callback; | |
463 | dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; | |
464 | ||
465 | /* set default param if platform doesn't have */ | |
48298206 KM |
466 | if (!priv->dparam.pipe_type) { |
467 | priv->dparam.pipe_type = usbhsc_default_pipe_type; | |
468 | priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); | |
f1407d5c | 469 | } |
48298206 KM |
470 | if (!priv->dparam.pio_dma_border) |
471 | priv->dparam.pio_dma_border = 64; /* 64byte */ | |
f1407d5c | 472 | |
b002ff6e KM |
473 | /* FIXME */ |
474 | /* runtime power control ? */ | |
48298206 | 475 | if (priv->pfunc.get_vbus) |
b002ff6e KM |
476 | usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); |
477 | ||
f1407d5c KM |
478 | /* |
479 | * priv settings | |
480 | */ | |
53069af3 SY |
481 | priv->irq = irq_res->start; |
482 | if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE) | |
483 | priv->irqflags = IRQF_SHARED; | |
f1407d5c | 484 | priv->pdev = pdev; |
bc57381e | 485 | INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); |
f1407d5c KM |
486 | spin_lock_init(usbhs_priv_to_lock(priv)); |
487 | ||
488 | /* call pipe and module init */ | |
489 | ret = usbhs_pipe_probe(priv); | |
490 | if (ret < 0) | |
58efc77c | 491 | return ret; |
f1407d5c | 492 | |
d3af90a5 | 493 | ret = usbhs_fifo_probe(priv); |
f1407d5c | 494 | if (ret < 0) |
97f93227 | 495 | goto probe_end_pipe_exit; |
f1407d5c | 496 | |
d3af90a5 KM |
497 | ret = usbhs_mod_probe(priv); |
498 | if (ret < 0) | |
499 | goto probe_end_fifo_exit; | |
500 | ||
f1407d5c KM |
501 | /* dev_set_drvdata should be called after usbhs_mod_init */ |
502 | dev_set_drvdata(&pdev->dev, priv); | |
503 | ||
504 | /* | |
505 | * deviece reset here because | |
506 | * USB device might be used in boot loader. | |
507 | */ | |
508 | usbhs_sys_clock_ctrl(priv, 0); | |
509 | ||
510 | /* | |
511 | * platform call | |
512 | * | |
513 | * USB phy setup might depend on CPU/Board. | |
514 | * If platform has its callback functions, | |
515 | * call it here. | |
516 | */ | |
517 | ret = usbhs_platform_call(priv, hardware_init, pdev); | |
518 | if (ret < 0) { | |
519 | dev_err(&pdev->dev, "platform prove failed.\n"); | |
97f93227 | 520 | goto probe_end_mod_exit; |
f1407d5c KM |
521 | } |
522 | ||
523 | /* reset phy for connection */ | |
524 | usbhs_platform_call(priv, phy_reset, pdev); | |
525 | ||
b002ff6e KM |
526 | /* power control */ |
527 | pm_runtime_enable(&pdev->dev); | |
528 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { | |
529 | usbhsc_power_ctrl(priv, 1); | |
530 | usbhs_mod_autonomy_mode(priv); | |
531 | } | |
532 | ||
f1407d5c KM |
533 | /* |
534 | * manual call notify_hotplug for cold plug | |
535 | */ | |
f1407d5c KM |
536 | ret = usbhsc_drvcllbck_notify_hotplug(pdev); |
537 | if (ret < 0) | |
538 | goto probe_end_call_remove; | |
539 | ||
540 | dev_info(&pdev->dev, "probed\n"); | |
541 | ||
542 | return ret; | |
543 | ||
544 | probe_end_call_remove: | |
545 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c KM |
546 | probe_end_mod_exit: |
547 | usbhs_mod_remove(priv); | |
d3af90a5 KM |
548 | probe_end_fifo_exit: |
549 | usbhs_fifo_remove(priv); | |
97f93227 KM |
550 | probe_end_pipe_exit: |
551 | usbhs_pipe_remove(priv); | |
f1407d5c KM |
552 | |
553 | dev_info(&pdev->dev, "probe failed\n"); | |
554 | ||
555 | return ret; | |
556 | } | |
557 | ||
fb4e98ab | 558 | static int usbhs_remove(struct platform_device *pdev) |
f1407d5c | 559 | { |
206dcc2c | 560 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
af32fe51 KM |
561 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; |
562 | struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; | |
f1407d5c KM |
563 | |
564 | dev_dbg(&pdev->dev, "usb remove\n"); | |
565 | ||
af32fe51 KM |
566 | dfunc->notify_hotplug = NULL; |
567 | ||
b002ff6e KM |
568 | /* power off */ |
569 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
570 | usbhsc_power_ctrl(priv, 0); | |
f1407d5c | 571 | |
b002ff6e | 572 | pm_runtime_disable(&pdev->dev); |
f1407d5c KM |
573 | |
574 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c | 575 | usbhs_mod_remove(priv); |
d3af90a5 | 576 | usbhs_fifo_remove(priv); |
97f93227 | 577 | usbhs_pipe_remove(priv); |
f1407d5c KM |
578 | |
579 | return 0; | |
580 | } | |
581 | ||
ca8a282a KM |
582 | static int usbhsc_suspend(struct device *dev) |
583 | { | |
584 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
585 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
586 | ||
587 | if (mod) { | |
588 | usbhs_mod_call(priv, stop, priv); | |
589 | usbhs_mod_change(priv, -1); | |
590 | } | |
591 | ||
592 | if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
593 | usbhsc_power_ctrl(priv, 0); | |
594 | ||
595 | return 0; | |
596 | } | |
597 | ||
598 | static int usbhsc_resume(struct device *dev) | |
599 | { | |
600 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
601 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
602 | ||
a2555cd3 | 603 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { |
ca8a282a | 604 | usbhsc_power_ctrl(priv, 1); |
a2555cd3 YS |
605 | usbhs_mod_autonomy_mode(priv); |
606 | } | |
ca8a282a | 607 | |
5b50d3b5 KM |
608 | usbhs_platform_call(priv, phy_reset, pdev); |
609 | ||
610 | usbhsc_drvcllbck_notify_hotplug(pdev); | |
ca8a282a KM |
611 | |
612 | return 0; | |
613 | } | |
614 | ||
615 | static int usbhsc_runtime_nop(struct device *dev) | |
616 | { | |
617 | /* Runtime PM callback shared between ->runtime_suspend() | |
618 | * and ->runtime_resume(). Simply returns success. | |
619 | * | |
620 | * This driver re-initializes all registers after | |
621 | * pm_runtime_get_sync() anyway so there is no need | |
622 | * to save and restore registers here. | |
623 | */ | |
624 | return 0; | |
625 | } | |
626 | ||
627 | static const struct dev_pm_ops usbhsc_pm_ops = { | |
628 | .suspend = usbhsc_suspend, | |
629 | .resume = usbhsc_resume, | |
630 | .runtime_suspend = usbhsc_runtime_nop, | |
631 | .runtime_resume = usbhsc_runtime_nop, | |
632 | }; | |
633 | ||
f1407d5c KM |
634 | static struct platform_driver renesas_usbhs_driver = { |
635 | .driver = { | |
636 | .name = "renesas_usbhs", | |
ca8a282a | 637 | .pm = &usbhsc_pm_ops, |
f1407d5c KM |
638 | }, |
639 | .probe = usbhs_probe, | |
7690417d | 640 | .remove = usbhs_remove, |
f1407d5c KM |
641 | }; |
642 | ||
cc27c96c | 643 | module_platform_driver(renesas_usbhs_driver); |
f1407d5c KM |
644 | |
645 | MODULE_LICENSE("GPL"); | |
646 | MODULE_DESCRIPTION("Renesas USB driver"); | |
647 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |