Commit | Line | Data |
---|---|---|
f1407d5c KM |
1 | /* |
2 | * Renesas USB driver | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
15 | * | |
16 | */ | |
17 | #include <linux/io.h> | |
18 | #include <linux/module.h> | |
19 | #include <linux/pm_runtime.h> | |
20 | #include <linux/slab.h> | |
21 | #include <linux/sysfs.h> | |
cc502bb7 | 22 | #include "common.h" |
f1407d5c | 23 | |
233f519d KM |
24 | /* |
25 | * image of renesas_usbhs | |
26 | * | |
27 | * ex) gadget case | |
28 | ||
29 | * mod.c | |
30 | * mod_gadget.c | |
31 | * mod_host.c pipe.c fifo.c | |
32 | * | |
33 | * +-------+ +-----------+ | |
34 | * | pipe0 |------>| fifo pio | | |
35 | * +------------+ +-------+ +-----------+ | |
36 | * | mod_gadget |=====> | pipe1 |--+ | |
37 | * +------------+ +-------+ | +-----------+ | |
38 | * | pipe2 | | +-| fifo dma0 | | |
39 | * +------------+ +-------+ | | +-----------+ | |
40 | * | mod_host | | pipe3 |<-|--+ | |
41 | * +------------+ +-------+ | +-----------+ | |
42 | * | .... | +--->| fifo dma1 | | |
43 | * | .... | +-----------+ | |
44 | */ | |
45 | ||
46 | ||
b002ff6e KM |
47 | #define USBHSF_RUNTIME_PWCTRL (1 << 0) |
48 | ||
49 | /* status */ | |
50 | #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) | |
51 | #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) | |
52 | #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) | |
53 | #define usbhsc_flags_has(p, b) ((p)->flags & (b)) | |
54 | ||
f1407d5c KM |
55 | /* |
56 | * platform call back | |
57 | * | |
58 | * renesas usb support platform callback function. | |
59 | * Below macro call it. | |
60 | * if platform doesn't have callback, it return 0 (no error) | |
61 | */ | |
62 | #define usbhs_platform_call(priv, func, args...)\ | |
63 | (!(priv) ? -ENODEV : \ | |
48298206 KM |
64 | !((priv)->pfunc.func) ? 0 : \ |
65 | (priv)->pfunc.func(args)) | |
f1407d5c KM |
66 | |
67 | /* | |
68 | * common functions | |
69 | */ | |
70 | u16 usbhs_read(struct usbhs_priv *priv, u32 reg) | |
71 | { | |
72 | return ioread16(priv->base + reg); | |
73 | } | |
74 | ||
75 | void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) | |
76 | { | |
77 | iowrite16(data, priv->base + reg); | |
78 | } | |
79 | ||
80 | void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) | |
81 | { | |
82 | u16 val = usbhs_read(priv, reg); | |
83 | ||
84 | val &= ~mask; | |
85 | val |= data & mask; | |
86 | ||
87 | usbhs_write(priv, reg, val); | |
88 | } | |
89 | ||
206dcc2c KM |
90 | struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) |
91 | { | |
92 | return dev_get_drvdata(&pdev->dev); | |
93 | } | |
94 | ||
f1407d5c KM |
95 | /* |
96 | * syscfg functions | |
97 | */ | |
76190152 | 98 | static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) |
f1407d5c KM |
99 | { |
100 | usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); | |
101 | } | |
102 | ||
f1407d5c KM |
103 | void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) |
104 | { | |
3244a7b4 KM |
105 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
106 | u16 val = DCFM | DRPD | HSE | USBE; | |
f427eb64 KM |
107 | int has_otg = usbhs_get_dparam(priv, has_otg); |
108 | ||
109 | if (has_otg) | |
110 | usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); | |
f1407d5c KM |
111 | |
112 | /* | |
113 | * if enable | |
114 | * | |
115 | * - select Host mode | |
116 | * - D+ Line/D- Line Pull-down | |
117 | */ | |
118 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
119 | } | |
120 | ||
121 | void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) | |
122 | { | |
3244a7b4 KM |
123 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
124 | u16 val = DPRPU | HSE | USBE; | |
f1407d5c KM |
125 | |
126 | /* | |
127 | * if enable | |
128 | * | |
129 | * - select Function mode | |
130 | * - D+ Line Pull-up | |
131 | */ | |
132 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
133 | } | |
134 | ||
dfbb7f4f KM |
135 | void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) |
136 | { | |
137 | usbhs_write(priv, TESTMODE, mode); | |
138 | } | |
139 | ||
f1407d5c KM |
140 | /* |
141 | * frame functions | |
142 | */ | |
143 | int usbhs_frame_get_num(struct usbhs_priv *priv) | |
144 | { | |
145 | return usbhs_read(priv, FRMNUM) & FRNM_MASK; | |
146 | } | |
147 | ||
ef8bedb9 KM |
148 | /* |
149 | * usb request functions | |
150 | */ | |
151 | void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
152 | { | |
153 | u16 val; | |
154 | ||
155 | val = usbhs_read(priv, USBREQ); | |
156 | req->bRequest = (val >> 8) & 0xFF; | |
157 | req->bRequestType = (val >> 0) & 0xFF; | |
158 | ||
159 | req->wValue = usbhs_read(priv, USBVAL); | |
160 | req->wIndex = usbhs_read(priv, USBINDX); | |
161 | req->wLength = usbhs_read(priv, USBLENG); | |
162 | } | |
163 | ||
164 | void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
165 | { | |
166 | usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); | |
167 | usbhs_write(priv, USBVAL, req->wValue); | |
168 | usbhs_write(priv, USBINDX, req->wIndex); | |
169 | usbhs_write(priv, USBLENG, req->wLength); | |
170 | ||
171 | usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); | |
172 | } | |
173 | ||
258485d9 KM |
174 | /* |
175 | * bus/vbus functions | |
176 | */ | |
177 | void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) | |
178 | { | |
a9be4a45 KM |
179 | u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); |
180 | ||
181 | if (status != USBRST) { | |
182 | struct device *dev = usbhs_priv_to_dev(priv); | |
183 | dev_err(dev, "usbhs should be reset\n"); | |
184 | } | |
185 | ||
258485d9 KM |
186 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); |
187 | } | |
188 | ||
189 | void usbhs_bus_send_reset(struct usbhs_priv *priv) | |
190 | { | |
191 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); | |
192 | } | |
193 | ||
75587f52 KM |
194 | int usbhs_bus_get_speed(struct usbhs_priv *priv) |
195 | { | |
196 | u16 dvstctr = usbhs_read(priv, DVSTCTR); | |
197 | ||
198 | switch (RHST & dvstctr) { | |
199 | case RHST_LOW_SPEED: | |
200 | return USB_SPEED_LOW; | |
201 | case RHST_FULL_SPEED: | |
202 | return USB_SPEED_FULL; | |
203 | case RHST_HIGH_SPEED: | |
204 | return USB_SPEED_HIGH; | |
205 | } | |
206 | ||
207 | return USB_SPEED_UNKNOWN; | |
208 | } | |
209 | ||
258485d9 KM |
210 | int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) |
211 | { | |
212 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
213 | ||
214 | return usbhs_platform_call(priv, set_vbus, pdev, enable); | |
215 | } | |
216 | ||
217 | static void usbhsc_bus_init(struct usbhs_priv *priv) | |
218 | { | |
219 | usbhs_write(priv, DVSTCTR, 0); | |
220 | ||
221 | usbhs_vbus_ctrl(priv, 0); | |
222 | } | |
223 | ||
eb05191f KM |
224 | /* |
225 | * device configuration | |
226 | */ | |
3dd49268 | 227 | int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, |
eb05191f KM |
228 | u16 upphub, u16 hubport, u16 speed) |
229 | { | |
230 | struct device *dev = usbhs_priv_to_dev(priv); | |
231 | u16 usbspd = 0; | |
232 | u32 reg = DEVADD0 + (2 * devnum); | |
233 | ||
234 | if (devnum > 10) { | |
235 | dev_err(dev, "cannot set speed to unknown device %d\n", devnum); | |
236 | return -EIO; | |
237 | } | |
238 | ||
239 | if (upphub > 0xA) { | |
240 | dev_err(dev, "unsupported hub number %d\n", upphub); | |
241 | return -EIO; | |
242 | } | |
243 | ||
244 | switch (speed) { | |
245 | case USB_SPEED_LOW: | |
246 | usbspd = USBSPD_SPEED_LOW; | |
247 | break; | |
248 | case USB_SPEED_FULL: | |
249 | usbspd = USBSPD_SPEED_FULL; | |
250 | break; | |
251 | case USB_SPEED_HIGH: | |
252 | usbspd = USBSPD_SPEED_HIGH; | |
253 | break; | |
254 | default: | |
255 | dev_err(dev, "unsupported speed %d\n", speed); | |
256 | return -EIO; | |
257 | } | |
258 | ||
259 | usbhs_write(priv, reg, UPPHUB(upphub) | | |
260 | HUBPORT(hubport)| | |
261 | USBSPD(usbspd)); | |
262 | ||
263 | return 0; | |
264 | } | |
265 | ||
f1407d5c KM |
266 | /* |
267 | * local functions | |
268 | */ | |
11935de5 | 269 | static void usbhsc_set_buswait(struct usbhs_priv *priv) |
f1407d5c KM |
270 | { |
271 | int wait = usbhs_get_dparam(priv, buswait_bwait); | |
f1407d5c | 272 | |
11935de5 KM |
273 | /* set bus wait if platform have */ |
274 | if (wait) | |
275 | usbhs_bset(priv, BUSWAIT, 0x000F, wait); | |
f1407d5c KM |
276 | } |
277 | ||
278 | /* | |
279 | * platform default param | |
280 | */ | |
281 | static u32 usbhsc_default_pipe_type[] = { | |
282 | USB_ENDPOINT_XFER_CONTROL, | |
283 | USB_ENDPOINT_XFER_ISOC, | |
284 | USB_ENDPOINT_XFER_ISOC, | |
285 | USB_ENDPOINT_XFER_BULK, | |
286 | USB_ENDPOINT_XFER_BULK, | |
287 | USB_ENDPOINT_XFER_BULK, | |
288 | USB_ENDPOINT_XFER_INT, | |
289 | USB_ENDPOINT_XFER_INT, | |
290 | USB_ENDPOINT_XFER_INT, | |
291 | USB_ENDPOINT_XFER_INT, | |
292 | }; | |
293 | ||
294 | /* | |
6e267da8 KM |
295 | * power control |
296 | */ | |
297 | static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) | |
298 | { | |
f1ee56a0 | 299 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
6e267da8 KM |
300 | struct device *dev = usbhs_priv_to_dev(priv); |
301 | ||
302 | if (enable) { | |
303 | /* enable PM */ | |
304 | pm_runtime_get_sync(dev); | |
305 | ||
f1ee56a0 KM |
306 | /* enable platform power */ |
307 | usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); | |
308 | ||
6e267da8 KM |
309 | /* USB on */ |
310 | usbhs_sys_clock_ctrl(priv, enable); | |
6e267da8 KM |
311 | } else { |
312 | /* USB off */ | |
6e267da8 KM |
313 | usbhs_sys_clock_ctrl(priv, enable); |
314 | ||
f1ee56a0 KM |
315 | /* disable platform power */ |
316 | usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); | |
317 | ||
6e267da8 KM |
318 | /* disable PM */ |
319 | pm_runtime_put_sync(dev); | |
320 | } | |
321 | } | |
322 | ||
323 | /* | |
ca8a282a | 324 | * hotplug |
f1407d5c | 325 | */ |
ca8a282a | 326 | static void usbhsc_hotplug(struct usbhs_priv *priv) |
f1407d5c | 327 | { |
f1407d5c KM |
328 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
329 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
330 | int id; | |
331 | int enable; | |
332 | int ret; | |
333 | ||
334 | /* | |
335 | * get vbus status from platform | |
336 | */ | |
337 | enable = usbhs_platform_call(priv, get_vbus, pdev); | |
338 | ||
339 | /* | |
340 | * get id from platform | |
341 | */ | |
342 | id = usbhs_platform_call(priv, get_id, pdev); | |
343 | ||
344 | if (enable && !mod) { | |
345 | ret = usbhs_mod_change(priv, id); | |
346 | if (ret < 0) | |
347 | return; | |
348 | ||
349 | dev_dbg(&pdev->dev, "%s enable\n", __func__); | |
350 | ||
6e267da8 | 351 | /* power on */ |
b002ff6e KM |
352 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
353 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c | 354 | |
258485d9 KM |
355 | /* bus init */ |
356 | usbhsc_set_buswait(priv); | |
357 | usbhsc_bus_init(priv); | |
358 | ||
f1407d5c KM |
359 | /* module start */ |
360 | usbhs_mod_call(priv, start, priv); | |
361 | ||
362 | } else if (!enable && mod) { | |
363 | dev_dbg(&pdev->dev, "%s disable\n", __func__); | |
364 | ||
365 | /* module stop */ | |
366 | usbhs_mod_call(priv, stop, priv); | |
367 | ||
258485d9 KM |
368 | /* bus init */ |
369 | usbhsc_bus_init(priv); | |
370 | ||
6e267da8 | 371 | /* power off */ |
b002ff6e KM |
372 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
373 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
374 | |
375 | usbhs_mod_change(priv, -1); | |
376 | ||
377 | /* reset phy for next connection */ | |
378 | usbhs_platform_call(priv, phy_reset, pdev); | |
379 | } | |
380 | } | |
381 | ||
ca8a282a KM |
382 | /* |
383 | * notify hotplug | |
384 | */ | |
385 | static void usbhsc_notify_hotplug(struct work_struct *work) | |
386 | { | |
387 | struct usbhs_priv *priv = container_of(work, | |
388 | struct usbhs_priv, | |
389 | notify_hotplug_work.work); | |
390 | usbhsc_hotplug(priv); | |
391 | } | |
392 | ||
b4fcea2a | 393 | static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) |
f1407d5c | 394 | { |
206dcc2c | 395 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
bc57381e | 396 | int delay = usbhs_get_dparam(priv, detection_delay); |
f1407d5c KM |
397 | |
398 | /* | |
399 | * This functions will be called in interrupt. | |
400 | * To make sure safety context, | |
401 | * use workqueue for usbhs_notify_hotplug | |
402 | */ | |
a49a88f1 KM |
403 | schedule_delayed_work(&priv->notify_hotplug_work, |
404 | msecs_to_jiffies(delay)); | |
f1407d5c KM |
405 | return 0; |
406 | } | |
407 | ||
408 | /* | |
409 | * platform functions | |
410 | */ | |
b7a8d17d | 411 | static int usbhs_probe(struct platform_device *pdev) |
f1407d5c KM |
412 | { |
413 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; | |
414 | struct renesas_usbhs_driver_callback *dfunc; | |
415 | struct usbhs_priv *priv; | |
53069af3 | 416 | struct resource *res, *irq_res; |
f1407d5c KM |
417 | int ret; |
418 | ||
419 | /* check platform information */ | |
420 | if (!info || | |
b002ff6e | 421 | !info->platform_callback.get_id) { |
f1407d5c KM |
422 | dev_err(&pdev->dev, "no platform information\n"); |
423 | return -EINVAL; | |
424 | } | |
425 | ||
426 | /* platform data */ | |
427 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
53069af3 SY |
428 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
429 | if (!res || !irq_res) { | |
f1407d5c KM |
430 | dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); |
431 | return -ENODEV; | |
432 | } | |
433 | ||
434 | /* usb private data */ | |
435 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
436 | if (!priv) { | |
437 | dev_err(&pdev->dev, "Could not allocate priv\n"); | |
438 | return -ENOMEM; | |
439 | } | |
440 | ||
441 | priv->base = ioremap_nocache(res->start, resource_size(res)); | |
442 | if (!priv->base) { | |
443 | dev_err(&pdev->dev, "ioremap error.\n"); | |
444 | ret = -ENOMEM; | |
445 | goto probe_end_kfree; | |
446 | } | |
447 | ||
448 | /* | |
449 | * care platform info | |
450 | */ | |
48298206 KM |
451 | memcpy(&priv->pfunc, |
452 | &info->platform_callback, | |
453 | sizeof(struct renesas_usbhs_platform_callback)); | |
454 | memcpy(&priv->dparam, | |
455 | &info->driver_param, | |
456 | sizeof(struct renesas_usbhs_driver_param)); | |
f1407d5c KM |
457 | |
458 | /* set driver callback functions for platform */ | |
459 | dfunc = &info->driver_callback; | |
460 | dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; | |
461 | ||
462 | /* set default param if platform doesn't have */ | |
48298206 KM |
463 | if (!priv->dparam.pipe_type) { |
464 | priv->dparam.pipe_type = usbhsc_default_pipe_type; | |
465 | priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); | |
f1407d5c | 466 | } |
48298206 KM |
467 | if (!priv->dparam.pio_dma_border) |
468 | priv->dparam.pio_dma_border = 64; /* 64byte */ | |
f1407d5c | 469 | |
b002ff6e KM |
470 | /* FIXME */ |
471 | /* runtime power control ? */ | |
48298206 | 472 | if (priv->pfunc.get_vbus) |
b002ff6e KM |
473 | usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); |
474 | ||
f1407d5c KM |
475 | /* |
476 | * priv settings | |
477 | */ | |
53069af3 SY |
478 | priv->irq = irq_res->start; |
479 | if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE) | |
480 | priv->irqflags = IRQF_SHARED; | |
f1407d5c | 481 | priv->pdev = pdev; |
bc57381e | 482 | INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); |
f1407d5c KM |
483 | spin_lock_init(usbhs_priv_to_lock(priv)); |
484 | ||
485 | /* call pipe and module init */ | |
486 | ret = usbhs_pipe_probe(priv); | |
487 | if (ret < 0) | |
97f93227 | 488 | goto probe_end_iounmap; |
f1407d5c | 489 | |
d3af90a5 | 490 | ret = usbhs_fifo_probe(priv); |
f1407d5c | 491 | if (ret < 0) |
97f93227 | 492 | goto probe_end_pipe_exit; |
f1407d5c | 493 | |
d3af90a5 KM |
494 | ret = usbhs_mod_probe(priv); |
495 | if (ret < 0) | |
496 | goto probe_end_fifo_exit; | |
497 | ||
f1407d5c KM |
498 | /* dev_set_drvdata should be called after usbhs_mod_init */ |
499 | dev_set_drvdata(&pdev->dev, priv); | |
500 | ||
501 | /* | |
502 | * deviece reset here because | |
503 | * USB device might be used in boot loader. | |
504 | */ | |
505 | usbhs_sys_clock_ctrl(priv, 0); | |
506 | ||
507 | /* | |
508 | * platform call | |
509 | * | |
510 | * USB phy setup might depend on CPU/Board. | |
511 | * If platform has its callback functions, | |
512 | * call it here. | |
513 | */ | |
514 | ret = usbhs_platform_call(priv, hardware_init, pdev); | |
515 | if (ret < 0) { | |
516 | dev_err(&pdev->dev, "platform prove failed.\n"); | |
97f93227 | 517 | goto probe_end_mod_exit; |
f1407d5c KM |
518 | } |
519 | ||
520 | /* reset phy for connection */ | |
521 | usbhs_platform_call(priv, phy_reset, pdev); | |
522 | ||
b002ff6e KM |
523 | /* power control */ |
524 | pm_runtime_enable(&pdev->dev); | |
525 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { | |
526 | usbhsc_power_ctrl(priv, 1); | |
527 | usbhs_mod_autonomy_mode(priv); | |
528 | } | |
529 | ||
f1407d5c KM |
530 | /* |
531 | * manual call notify_hotplug for cold plug | |
532 | */ | |
f1407d5c KM |
533 | ret = usbhsc_drvcllbck_notify_hotplug(pdev); |
534 | if (ret < 0) | |
535 | goto probe_end_call_remove; | |
536 | ||
537 | dev_info(&pdev->dev, "probed\n"); | |
538 | ||
539 | return ret; | |
540 | ||
541 | probe_end_call_remove: | |
542 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c KM |
543 | probe_end_mod_exit: |
544 | usbhs_mod_remove(priv); | |
d3af90a5 KM |
545 | probe_end_fifo_exit: |
546 | usbhs_fifo_remove(priv); | |
97f93227 KM |
547 | probe_end_pipe_exit: |
548 | usbhs_pipe_remove(priv); | |
f1407d5c KM |
549 | probe_end_iounmap: |
550 | iounmap(priv->base); | |
551 | probe_end_kfree: | |
552 | kfree(priv); | |
553 | ||
554 | dev_info(&pdev->dev, "probe failed\n"); | |
555 | ||
556 | return ret; | |
557 | } | |
558 | ||
559 | static int __devexit usbhs_remove(struct platform_device *pdev) | |
560 | { | |
206dcc2c | 561 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
af32fe51 KM |
562 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; |
563 | struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; | |
f1407d5c KM |
564 | |
565 | dev_dbg(&pdev->dev, "usb remove\n"); | |
566 | ||
af32fe51 KM |
567 | dfunc->notify_hotplug = NULL; |
568 | ||
b002ff6e KM |
569 | /* power off */ |
570 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
571 | usbhsc_power_ctrl(priv, 0); | |
f1407d5c | 572 | |
b002ff6e | 573 | pm_runtime_disable(&pdev->dev); |
f1407d5c KM |
574 | |
575 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c | 576 | usbhs_mod_remove(priv); |
d3af90a5 | 577 | usbhs_fifo_remove(priv); |
97f93227 | 578 | usbhs_pipe_remove(priv); |
f1407d5c KM |
579 | iounmap(priv->base); |
580 | kfree(priv); | |
581 | ||
582 | return 0; | |
583 | } | |
584 | ||
ca8a282a KM |
585 | static int usbhsc_suspend(struct device *dev) |
586 | { | |
587 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
588 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
589 | ||
590 | if (mod) { | |
591 | usbhs_mod_call(priv, stop, priv); | |
592 | usbhs_mod_change(priv, -1); | |
593 | } | |
594 | ||
595 | if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
596 | usbhsc_power_ctrl(priv, 0); | |
597 | ||
598 | return 0; | |
599 | } | |
600 | ||
601 | static int usbhsc_resume(struct device *dev) | |
602 | { | |
603 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
604 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
605 | ||
ca8a282a KM |
606 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
607 | usbhsc_power_ctrl(priv, 1); | |
608 | ||
5b50d3b5 KM |
609 | usbhs_platform_call(priv, phy_reset, pdev); |
610 | ||
611 | usbhsc_drvcllbck_notify_hotplug(pdev); | |
ca8a282a KM |
612 | |
613 | return 0; | |
614 | } | |
615 | ||
616 | static int usbhsc_runtime_nop(struct device *dev) | |
617 | { | |
618 | /* Runtime PM callback shared between ->runtime_suspend() | |
619 | * and ->runtime_resume(). Simply returns success. | |
620 | * | |
621 | * This driver re-initializes all registers after | |
622 | * pm_runtime_get_sync() anyway so there is no need | |
623 | * to save and restore registers here. | |
624 | */ | |
625 | return 0; | |
626 | } | |
627 | ||
628 | static const struct dev_pm_ops usbhsc_pm_ops = { | |
629 | .suspend = usbhsc_suspend, | |
630 | .resume = usbhsc_resume, | |
631 | .runtime_suspend = usbhsc_runtime_nop, | |
632 | .runtime_resume = usbhsc_runtime_nop, | |
633 | }; | |
634 | ||
f1407d5c KM |
635 | static struct platform_driver renesas_usbhs_driver = { |
636 | .driver = { | |
637 | .name = "renesas_usbhs", | |
ca8a282a | 638 | .pm = &usbhsc_pm_ops, |
f1407d5c KM |
639 | }, |
640 | .probe = usbhs_probe, | |
641 | .remove = __devexit_p(usbhs_remove), | |
642 | }; | |
643 | ||
cc27c96c | 644 | module_platform_driver(renesas_usbhs_driver); |
f1407d5c KM |
645 | |
646 | MODULE_LICENSE("GPL"); | |
647 | MODULE_DESCRIPTION("Renesas USB driver"); | |
648 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |