Commit | Line | Data |
---|---|---|
f1407d5c KM |
1 | /* |
2 | * Renesas USB driver | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
15 | * | |
16 | */ | |
17 | #include <linux/io.h> | |
18 | #include <linux/module.h> | |
19 | #include <linux/pm_runtime.h> | |
20 | #include <linux/slab.h> | |
21 | #include <linux/sysfs.h> | |
22 | #include "./common.h" | |
23 | ||
233f519d KM |
24 | /* |
25 | * image of renesas_usbhs | |
26 | * | |
27 | * ex) gadget case | |
28 | ||
29 | * mod.c | |
30 | * mod_gadget.c | |
31 | * mod_host.c pipe.c fifo.c | |
32 | * | |
33 | * +-------+ +-----------+ | |
34 | * | pipe0 |------>| fifo pio | | |
35 | * +------------+ +-------+ +-----------+ | |
36 | * | mod_gadget |=====> | pipe1 |--+ | |
37 | * +------------+ +-------+ | +-----------+ | |
38 | * | pipe2 | | +-| fifo dma0 | | |
39 | * +------------+ +-------+ | | +-----------+ | |
40 | * | mod_host | | pipe3 |<-|--+ | |
41 | * +------------+ +-------+ | +-----------+ | |
42 | * | .... | +--->| fifo dma1 | | |
43 | * | .... | +-----------+ | |
44 | */ | |
45 | ||
46 | ||
b002ff6e KM |
47 | #define USBHSF_RUNTIME_PWCTRL (1 << 0) |
48 | ||
49 | /* status */ | |
50 | #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) | |
51 | #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) | |
52 | #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) | |
53 | #define usbhsc_flags_has(p, b) ((p)->flags & (b)) | |
54 | ||
f1407d5c KM |
55 | /* |
56 | * platform call back | |
57 | * | |
58 | * renesas usb support platform callback function. | |
59 | * Below macro call it. | |
60 | * if platform doesn't have callback, it return 0 (no error) | |
61 | */ | |
62 | #define usbhs_platform_call(priv, func, args...)\ | |
63 | (!(priv) ? -ENODEV : \ | |
64 | !((priv)->pfunc->func) ? 0 : \ | |
65 | (priv)->pfunc->func(args)) | |
66 | ||
67 | /* | |
68 | * common functions | |
69 | */ | |
70 | u16 usbhs_read(struct usbhs_priv *priv, u32 reg) | |
71 | { | |
72 | return ioread16(priv->base + reg); | |
73 | } | |
74 | ||
75 | void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) | |
76 | { | |
77 | iowrite16(data, priv->base + reg); | |
78 | } | |
79 | ||
80 | void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) | |
81 | { | |
82 | u16 val = usbhs_read(priv, reg); | |
83 | ||
84 | val &= ~mask; | |
85 | val |= data & mask; | |
86 | ||
87 | usbhs_write(priv, reg, val); | |
88 | } | |
89 | ||
206dcc2c KM |
90 | struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) |
91 | { | |
92 | return dev_get_drvdata(&pdev->dev); | |
93 | } | |
94 | ||
f1407d5c KM |
95 | /* |
96 | * syscfg functions | |
97 | */ | |
98 | void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) | |
99 | { | |
100 | usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); | |
101 | } | |
102 | ||
103 | void usbhs_sys_hispeed_ctrl(struct usbhs_priv *priv, int enable) | |
104 | { | |
105 | usbhs_bset(priv, SYSCFG, HSE, enable ? HSE : 0); | |
106 | } | |
107 | ||
108 | void usbhs_sys_usb_ctrl(struct usbhs_priv *priv, int enable) | |
109 | { | |
110 | usbhs_bset(priv, SYSCFG, USBE, enable ? USBE : 0); | |
111 | } | |
112 | ||
113 | void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) | |
114 | { | |
115 | u16 mask = DCFM | DRPD | DPRPU; | |
116 | u16 val = DCFM | DRPD; | |
117 | ||
118 | /* | |
119 | * if enable | |
120 | * | |
121 | * - select Host mode | |
122 | * - D+ Line/D- Line Pull-down | |
123 | */ | |
124 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
125 | } | |
126 | ||
127 | void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) | |
128 | { | |
129 | u16 mask = DCFM | DRPD | DPRPU; | |
130 | u16 val = DPRPU; | |
131 | ||
132 | /* | |
133 | * if enable | |
134 | * | |
135 | * - select Function mode | |
136 | * - D+ Line Pull-up | |
137 | */ | |
138 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
139 | } | |
140 | ||
141 | /* | |
142 | * frame functions | |
143 | */ | |
144 | int usbhs_frame_get_num(struct usbhs_priv *priv) | |
145 | { | |
146 | return usbhs_read(priv, FRMNUM) & FRNM_MASK; | |
147 | } | |
148 | ||
149 | /* | |
150 | * local functions | |
151 | */ | |
f1407d5c KM |
152 | static void usbhsc_bus_ctrl(struct usbhs_priv *priv, int enable) |
153 | { | |
154 | int wait = usbhs_get_dparam(priv, buswait_bwait); | |
155 | u16 data = 0; | |
156 | ||
157 | if (enable) { | |
158 | /* set bus wait if platform have */ | |
159 | if (wait) | |
160 | usbhs_bset(priv, BUSWAIT, 0x000F, wait); | |
161 | } | |
162 | usbhs_write(priv, DVSTCTR, data); | |
163 | } | |
164 | ||
165 | /* | |
166 | * platform default param | |
167 | */ | |
168 | static u32 usbhsc_default_pipe_type[] = { | |
169 | USB_ENDPOINT_XFER_CONTROL, | |
170 | USB_ENDPOINT_XFER_ISOC, | |
171 | USB_ENDPOINT_XFER_ISOC, | |
172 | USB_ENDPOINT_XFER_BULK, | |
173 | USB_ENDPOINT_XFER_BULK, | |
174 | USB_ENDPOINT_XFER_BULK, | |
175 | USB_ENDPOINT_XFER_INT, | |
176 | USB_ENDPOINT_XFER_INT, | |
177 | USB_ENDPOINT_XFER_INT, | |
178 | USB_ENDPOINT_XFER_INT, | |
179 | }; | |
180 | ||
181 | /* | |
6e267da8 KM |
182 | * power control |
183 | */ | |
184 | static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) | |
185 | { | |
186 | struct device *dev = usbhs_priv_to_dev(priv); | |
187 | ||
188 | if (enable) { | |
189 | /* enable PM */ | |
190 | pm_runtime_get_sync(dev); | |
191 | ||
192 | /* USB on */ | |
193 | usbhs_sys_clock_ctrl(priv, enable); | |
194 | usbhsc_bus_ctrl(priv, enable); | |
195 | } else { | |
196 | /* USB off */ | |
197 | usbhsc_bus_ctrl(priv, enable); | |
198 | usbhs_sys_clock_ctrl(priv, enable); | |
199 | ||
200 | /* disable PM */ | |
201 | pm_runtime_put_sync(dev); | |
202 | } | |
203 | } | |
204 | ||
205 | /* | |
206 | * notify hotplug | |
f1407d5c KM |
207 | */ |
208 | static void usbhsc_notify_hotplug(struct work_struct *work) | |
209 | { | |
210 | struct usbhs_priv *priv = container_of(work, | |
211 | struct usbhs_priv, | |
bc57381e | 212 | notify_hotplug_work.work); |
f1407d5c KM |
213 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
214 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
215 | int id; | |
216 | int enable; | |
217 | int ret; | |
218 | ||
219 | /* | |
220 | * get vbus status from platform | |
221 | */ | |
222 | enable = usbhs_platform_call(priv, get_vbus, pdev); | |
223 | ||
224 | /* | |
225 | * get id from platform | |
226 | */ | |
227 | id = usbhs_platform_call(priv, get_id, pdev); | |
228 | ||
229 | if (enable && !mod) { | |
230 | ret = usbhs_mod_change(priv, id); | |
231 | if (ret < 0) | |
232 | return; | |
233 | ||
234 | dev_dbg(&pdev->dev, "%s enable\n", __func__); | |
235 | ||
6e267da8 | 236 | /* power on */ |
b002ff6e KM |
237 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
238 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
239 | |
240 | /* module start */ | |
241 | usbhs_mod_call(priv, start, priv); | |
242 | ||
243 | } else if (!enable && mod) { | |
244 | dev_dbg(&pdev->dev, "%s disable\n", __func__); | |
245 | ||
246 | /* module stop */ | |
247 | usbhs_mod_call(priv, stop, priv); | |
248 | ||
6e267da8 | 249 | /* power off */ |
b002ff6e KM |
250 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
251 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
252 | |
253 | usbhs_mod_change(priv, -1); | |
254 | ||
255 | /* reset phy for next connection */ | |
256 | usbhs_platform_call(priv, phy_reset, pdev); | |
257 | } | |
258 | } | |
259 | ||
bc57381e | 260 | int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) |
f1407d5c | 261 | { |
206dcc2c | 262 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
bc57381e | 263 | int delay = usbhs_get_dparam(priv, detection_delay); |
f1407d5c KM |
264 | |
265 | /* | |
266 | * This functions will be called in interrupt. | |
267 | * To make sure safety context, | |
268 | * use workqueue for usbhs_notify_hotplug | |
269 | */ | |
bc57381e | 270 | schedule_delayed_work(&priv->notify_hotplug_work, delay); |
f1407d5c KM |
271 | return 0; |
272 | } | |
273 | ||
274 | /* | |
275 | * platform functions | |
276 | */ | |
277 | static int __devinit usbhs_probe(struct platform_device *pdev) | |
278 | { | |
279 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; | |
280 | struct renesas_usbhs_driver_callback *dfunc; | |
281 | struct usbhs_priv *priv; | |
282 | struct resource *res; | |
283 | unsigned int irq; | |
284 | int ret; | |
285 | ||
286 | /* check platform information */ | |
287 | if (!info || | |
b002ff6e | 288 | !info->platform_callback.get_id) { |
f1407d5c KM |
289 | dev_err(&pdev->dev, "no platform information\n"); |
290 | return -EINVAL; | |
291 | } | |
292 | ||
293 | /* platform data */ | |
294 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
295 | irq = platform_get_irq(pdev, 0); | |
296 | if (!res || (int)irq <= 0) { | |
297 | dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); | |
298 | return -ENODEV; | |
299 | } | |
300 | ||
301 | /* usb private data */ | |
302 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
303 | if (!priv) { | |
304 | dev_err(&pdev->dev, "Could not allocate priv\n"); | |
305 | return -ENOMEM; | |
306 | } | |
307 | ||
308 | priv->base = ioremap_nocache(res->start, resource_size(res)); | |
309 | if (!priv->base) { | |
310 | dev_err(&pdev->dev, "ioremap error.\n"); | |
311 | ret = -ENOMEM; | |
312 | goto probe_end_kfree; | |
313 | } | |
314 | ||
315 | /* | |
316 | * care platform info | |
317 | */ | |
318 | priv->pfunc = &info->platform_callback; | |
319 | priv->dparam = &info->driver_param; | |
320 | ||
321 | /* set driver callback functions for platform */ | |
322 | dfunc = &info->driver_callback; | |
323 | dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; | |
324 | ||
325 | /* set default param if platform doesn't have */ | |
326 | if (!priv->dparam->pipe_type) { | |
327 | priv->dparam->pipe_type = usbhsc_default_pipe_type; | |
328 | priv->dparam->pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); | |
329 | } | |
e73a9891 KM |
330 | if (!priv->dparam->pio_dma_border) |
331 | priv->dparam->pio_dma_border = 64; /* 64byte */ | |
f1407d5c | 332 | |
b002ff6e KM |
333 | /* FIXME */ |
334 | /* runtime power control ? */ | |
335 | if (priv->pfunc->get_vbus) | |
336 | usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); | |
337 | ||
f1407d5c KM |
338 | /* |
339 | * priv settings | |
340 | */ | |
341 | priv->irq = irq; | |
342 | priv->pdev = pdev; | |
bc57381e | 343 | INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); |
f1407d5c KM |
344 | spin_lock_init(usbhs_priv_to_lock(priv)); |
345 | ||
346 | /* call pipe and module init */ | |
347 | ret = usbhs_pipe_probe(priv); | |
348 | if (ret < 0) | |
97f93227 | 349 | goto probe_end_iounmap; |
f1407d5c | 350 | |
d3af90a5 | 351 | ret = usbhs_fifo_probe(priv); |
f1407d5c | 352 | if (ret < 0) |
97f93227 | 353 | goto probe_end_pipe_exit; |
f1407d5c | 354 | |
d3af90a5 KM |
355 | ret = usbhs_mod_probe(priv); |
356 | if (ret < 0) | |
357 | goto probe_end_fifo_exit; | |
358 | ||
f1407d5c KM |
359 | /* dev_set_drvdata should be called after usbhs_mod_init */ |
360 | dev_set_drvdata(&pdev->dev, priv); | |
361 | ||
362 | /* | |
363 | * deviece reset here because | |
364 | * USB device might be used in boot loader. | |
365 | */ | |
366 | usbhs_sys_clock_ctrl(priv, 0); | |
367 | ||
368 | /* | |
369 | * platform call | |
370 | * | |
371 | * USB phy setup might depend on CPU/Board. | |
372 | * If platform has its callback functions, | |
373 | * call it here. | |
374 | */ | |
375 | ret = usbhs_platform_call(priv, hardware_init, pdev); | |
376 | if (ret < 0) { | |
377 | dev_err(&pdev->dev, "platform prove failed.\n"); | |
97f93227 | 378 | goto probe_end_mod_exit; |
f1407d5c KM |
379 | } |
380 | ||
381 | /* reset phy for connection */ | |
382 | usbhs_platform_call(priv, phy_reset, pdev); | |
383 | ||
b002ff6e KM |
384 | /* power control */ |
385 | pm_runtime_enable(&pdev->dev); | |
386 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { | |
387 | usbhsc_power_ctrl(priv, 1); | |
388 | usbhs_mod_autonomy_mode(priv); | |
389 | } | |
390 | ||
f1407d5c KM |
391 | /* |
392 | * manual call notify_hotplug for cold plug | |
393 | */ | |
f1407d5c KM |
394 | ret = usbhsc_drvcllbck_notify_hotplug(pdev); |
395 | if (ret < 0) | |
396 | goto probe_end_call_remove; | |
397 | ||
398 | dev_info(&pdev->dev, "probed\n"); | |
399 | ||
400 | return ret; | |
401 | ||
402 | probe_end_call_remove: | |
403 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c KM |
404 | probe_end_mod_exit: |
405 | usbhs_mod_remove(priv); | |
d3af90a5 KM |
406 | probe_end_fifo_exit: |
407 | usbhs_fifo_remove(priv); | |
97f93227 KM |
408 | probe_end_pipe_exit: |
409 | usbhs_pipe_remove(priv); | |
f1407d5c KM |
410 | probe_end_iounmap: |
411 | iounmap(priv->base); | |
412 | probe_end_kfree: | |
413 | kfree(priv); | |
414 | ||
415 | dev_info(&pdev->dev, "probe failed\n"); | |
416 | ||
417 | return ret; | |
418 | } | |
419 | ||
420 | static int __devexit usbhs_remove(struct platform_device *pdev) | |
421 | { | |
206dcc2c | 422 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
af32fe51 KM |
423 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; |
424 | struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; | |
f1407d5c KM |
425 | |
426 | dev_dbg(&pdev->dev, "usb remove\n"); | |
427 | ||
af32fe51 KM |
428 | dfunc->notify_hotplug = NULL; |
429 | ||
b002ff6e KM |
430 | /* power off */ |
431 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
432 | usbhsc_power_ctrl(priv, 0); | |
f1407d5c | 433 | |
b002ff6e | 434 | pm_runtime_disable(&pdev->dev); |
f1407d5c KM |
435 | |
436 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c | 437 | usbhs_mod_remove(priv); |
d3af90a5 | 438 | usbhs_fifo_remove(priv); |
97f93227 | 439 | usbhs_pipe_remove(priv); |
f1407d5c KM |
440 | iounmap(priv->base); |
441 | kfree(priv); | |
442 | ||
443 | return 0; | |
444 | } | |
445 | ||
446 | static struct platform_driver renesas_usbhs_driver = { | |
447 | .driver = { | |
448 | .name = "renesas_usbhs", | |
449 | }, | |
450 | .probe = usbhs_probe, | |
451 | .remove = __devexit_p(usbhs_remove), | |
452 | }; | |
453 | ||
454 | static int __init usbhs_init(void) | |
455 | { | |
456 | return platform_driver_register(&renesas_usbhs_driver); | |
457 | } | |
458 | ||
459 | static void __exit usbhs_exit(void) | |
460 | { | |
461 | platform_driver_unregister(&renesas_usbhs_driver); | |
462 | } | |
463 | ||
464 | module_init(usbhs_init); | |
465 | module_exit(usbhs_exit); | |
466 | ||
467 | MODULE_LICENSE("GPL"); | |
468 | MODULE_DESCRIPTION("Renesas USB driver"); | |
469 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |