Commit | Line | Data |
---|---|---|
f1407d5c KM |
1 | /* |
2 | * Renesas USB driver | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
15 | * | |
16 | */ | |
17 | #include <linux/io.h> | |
18 | #include <linux/module.h> | |
19 | #include <linux/pm_runtime.h> | |
20 | #include <linux/slab.h> | |
21 | #include <linux/sysfs.h> | |
22 | #include "./common.h" | |
23 | ||
233f519d KM |
24 | /* |
25 | * image of renesas_usbhs | |
26 | * | |
27 | * ex) gadget case | |
28 | ||
29 | * mod.c | |
30 | * mod_gadget.c | |
31 | * mod_host.c pipe.c fifo.c | |
32 | * | |
33 | * +-------+ +-----------+ | |
34 | * | pipe0 |------>| fifo pio | | |
35 | * +------------+ +-------+ +-----------+ | |
36 | * | mod_gadget |=====> | pipe1 |--+ | |
37 | * +------------+ +-------+ | +-----------+ | |
38 | * | pipe2 | | +-| fifo dma0 | | |
39 | * +------------+ +-------+ | | +-----------+ | |
40 | * | mod_host | | pipe3 |<-|--+ | |
41 | * +------------+ +-------+ | +-----------+ | |
42 | * | .... | +--->| fifo dma1 | | |
43 | * | .... | +-----------+ | |
44 | */ | |
45 | ||
46 | ||
b002ff6e KM |
47 | #define USBHSF_RUNTIME_PWCTRL (1 << 0) |
48 | ||
49 | /* status */ | |
50 | #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) | |
51 | #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) | |
52 | #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) | |
53 | #define usbhsc_flags_has(p, b) ((p)->flags & (b)) | |
54 | ||
f1407d5c KM |
55 | /* |
56 | * platform call back | |
57 | * | |
58 | * renesas usb support platform callback function. | |
59 | * Below macro call it. | |
60 | * if platform doesn't have callback, it return 0 (no error) | |
61 | */ | |
62 | #define usbhs_platform_call(priv, func, args...)\ | |
63 | (!(priv) ? -ENODEV : \ | |
48298206 KM |
64 | !((priv)->pfunc.func) ? 0 : \ |
65 | (priv)->pfunc.func(args)) | |
f1407d5c KM |
66 | |
67 | /* | |
68 | * common functions | |
69 | */ | |
70 | u16 usbhs_read(struct usbhs_priv *priv, u32 reg) | |
71 | { | |
72 | return ioread16(priv->base + reg); | |
73 | } | |
74 | ||
75 | void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) | |
76 | { | |
77 | iowrite16(data, priv->base + reg); | |
78 | } | |
79 | ||
80 | void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) | |
81 | { | |
82 | u16 val = usbhs_read(priv, reg); | |
83 | ||
84 | val &= ~mask; | |
85 | val |= data & mask; | |
86 | ||
87 | usbhs_write(priv, reg, val); | |
88 | } | |
89 | ||
206dcc2c KM |
90 | struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) |
91 | { | |
92 | return dev_get_drvdata(&pdev->dev); | |
93 | } | |
94 | ||
f1407d5c KM |
95 | /* |
96 | * syscfg functions | |
97 | */ | |
76190152 | 98 | static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) |
f1407d5c KM |
99 | { |
100 | usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); | |
101 | } | |
102 | ||
f1407d5c KM |
103 | void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) |
104 | { | |
3244a7b4 KM |
105 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
106 | u16 val = DCFM | DRPD | HSE | USBE; | |
f427eb64 KM |
107 | int has_otg = usbhs_get_dparam(priv, has_otg); |
108 | ||
109 | if (has_otg) | |
110 | usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); | |
f1407d5c KM |
111 | |
112 | /* | |
113 | * if enable | |
114 | * | |
115 | * - select Host mode | |
116 | * - D+ Line/D- Line Pull-down | |
117 | */ | |
118 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
119 | } | |
120 | ||
121 | void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) | |
122 | { | |
3244a7b4 KM |
123 | u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; |
124 | u16 val = DPRPU | HSE | USBE; | |
f1407d5c KM |
125 | |
126 | /* | |
127 | * if enable | |
128 | * | |
129 | * - select Function mode | |
130 | * - D+ Line Pull-up | |
131 | */ | |
132 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
133 | } | |
134 | ||
135 | /* | |
136 | * frame functions | |
137 | */ | |
138 | int usbhs_frame_get_num(struct usbhs_priv *priv) | |
139 | { | |
140 | return usbhs_read(priv, FRMNUM) & FRNM_MASK; | |
141 | } | |
142 | ||
ef8bedb9 KM |
143 | /* |
144 | * usb request functions | |
145 | */ | |
146 | void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
147 | { | |
148 | u16 val; | |
149 | ||
150 | val = usbhs_read(priv, USBREQ); | |
151 | req->bRequest = (val >> 8) & 0xFF; | |
152 | req->bRequestType = (val >> 0) & 0xFF; | |
153 | ||
154 | req->wValue = usbhs_read(priv, USBVAL); | |
155 | req->wIndex = usbhs_read(priv, USBINDX); | |
156 | req->wLength = usbhs_read(priv, USBLENG); | |
157 | } | |
158 | ||
159 | void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
160 | { | |
161 | usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); | |
162 | usbhs_write(priv, USBVAL, req->wValue); | |
163 | usbhs_write(priv, USBINDX, req->wIndex); | |
164 | usbhs_write(priv, USBLENG, req->wLength); | |
165 | ||
166 | usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); | |
167 | } | |
168 | ||
258485d9 KM |
169 | /* |
170 | * bus/vbus functions | |
171 | */ | |
172 | void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) | |
173 | { | |
a9be4a45 KM |
174 | u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); |
175 | ||
176 | if (status != USBRST) { | |
177 | struct device *dev = usbhs_priv_to_dev(priv); | |
178 | dev_err(dev, "usbhs should be reset\n"); | |
179 | } | |
180 | ||
258485d9 KM |
181 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); |
182 | } | |
183 | ||
184 | void usbhs_bus_send_reset(struct usbhs_priv *priv) | |
185 | { | |
186 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); | |
187 | } | |
188 | ||
75587f52 KM |
189 | int usbhs_bus_get_speed(struct usbhs_priv *priv) |
190 | { | |
191 | u16 dvstctr = usbhs_read(priv, DVSTCTR); | |
192 | ||
193 | switch (RHST & dvstctr) { | |
194 | case RHST_LOW_SPEED: | |
195 | return USB_SPEED_LOW; | |
196 | case RHST_FULL_SPEED: | |
197 | return USB_SPEED_FULL; | |
198 | case RHST_HIGH_SPEED: | |
199 | return USB_SPEED_HIGH; | |
200 | } | |
201 | ||
202 | return USB_SPEED_UNKNOWN; | |
203 | } | |
204 | ||
258485d9 KM |
205 | int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) |
206 | { | |
207 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
208 | ||
209 | return usbhs_platform_call(priv, set_vbus, pdev, enable); | |
210 | } | |
211 | ||
212 | static void usbhsc_bus_init(struct usbhs_priv *priv) | |
213 | { | |
214 | usbhs_write(priv, DVSTCTR, 0); | |
215 | ||
216 | usbhs_vbus_ctrl(priv, 0); | |
217 | } | |
218 | ||
eb05191f KM |
219 | /* |
220 | * device configuration | |
221 | */ | |
222 | int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum, | |
223 | u16 upphub, u16 hubport, u16 speed) | |
224 | { | |
225 | struct device *dev = usbhs_priv_to_dev(priv); | |
226 | u16 usbspd = 0; | |
227 | u32 reg = DEVADD0 + (2 * devnum); | |
228 | ||
229 | if (devnum > 10) { | |
230 | dev_err(dev, "cannot set speed to unknown device %d\n", devnum); | |
231 | return -EIO; | |
232 | } | |
233 | ||
234 | if (upphub > 0xA) { | |
235 | dev_err(dev, "unsupported hub number %d\n", upphub); | |
236 | return -EIO; | |
237 | } | |
238 | ||
239 | switch (speed) { | |
240 | case USB_SPEED_LOW: | |
241 | usbspd = USBSPD_SPEED_LOW; | |
242 | break; | |
243 | case USB_SPEED_FULL: | |
244 | usbspd = USBSPD_SPEED_FULL; | |
245 | break; | |
246 | case USB_SPEED_HIGH: | |
247 | usbspd = USBSPD_SPEED_HIGH; | |
248 | break; | |
249 | default: | |
250 | dev_err(dev, "unsupported speed %d\n", speed); | |
251 | return -EIO; | |
252 | } | |
253 | ||
254 | usbhs_write(priv, reg, UPPHUB(upphub) | | |
255 | HUBPORT(hubport)| | |
256 | USBSPD(usbspd)); | |
257 | ||
258 | return 0; | |
259 | } | |
260 | ||
f1407d5c KM |
261 | /* |
262 | * local functions | |
263 | */ | |
11935de5 | 264 | static void usbhsc_set_buswait(struct usbhs_priv *priv) |
f1407d5c KM |
265 | { |
266 | int wait = usbhs_get_dparam(priv, buswait_bwait); | |
f1407d5c | 267 | |
11935de5 KM |
268 | /* set bus wait if platform have */ |
269 | if (wait) | |
270 | usbhs_bset(priv, BUSWAIT, 0x000F, wait); | |
f1407d5c KM |
271 | } |
272 | ||
273 | /* | |
274 | * platform default param | |
275 | */ | |
276 | static u32 usbhsc_default_pipe_type[] = { | |
277 | USB_ENDPOINT_XFER_CONTROL, | |
278 | USB_ENDPOINT_XFER_ISOC, | |
279 | USB_ENDPOINT_XFER_ISOC, | |
280 | USB_ENDPOINT_XFER_BULK, | |
281 | USB_ENDPOINT_XFER_BULK, | |
282 | USB_ENDPOINT_XFER_BULK, | |
283 | USB_ENDPOINT_XFER_INT, | |
284 | USB_ENDPOINT_XFER_INT, | |
285 | USB_ENDPOINT_XFER_INT, | |
286 | USB_ENDPOINT_XFER_INT, | |
287 | }; | |
288 | ||
289 | /* | |
6e267da8 KM |
290 | * power control |
291 | */ | |
292 | static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) | |
293 | { | |
294 | struct device *dev = usbhs_priv_to_dev(priv); | |
295 | ||
296 | if (enable) { | |
297 | /* enable PM */ | |
298 | pm_runtime_get_sync(dev); | |
299 | ||
300 | /* USB on */ | |
301 | usbhs_sys_clock_ctrl(priv, enable); | |
6e267da8 KM |
302 | } else { |
303 | /* USB off */ | |
6e267da8 KM |
304 | usbhs_sys_clock_ctrl(priv, enable); |
305 | ||
306 | /* disable PM */ | |
307 | pm_runtime_put_sync(dev); | |
308 | } | |
309 | } | |
310 | ||
311 | /* | |
ca8a282a | 312 | * hotplug |
f1407d5c | 313 | */ |
ca8a282a | 314 | static void usbhsc_hotplug(struct usbhs_priv *priv) |
f1407d5c | 315 | { |
f1407d5c KM |
316 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
317 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
318 | int id; | |
319 | int enable; | |
320 | int ret; | |
321 | ||
322 | /* | |
323 | * get vbus status from platform | |
324 | */ | |
325 | enable = usbhs_platform_call(priv, get_vbus, pdev); | |
326 | ||
327 | /* | |
328 | * get id from platform | |
329 | */ | |
330 | id = usbhs_platform_call(priv, get_id, pdev); | |
331 | ||
332 | if (enable && !mod) { | |
333 | ret = usbhs_mod_change(priv, id); | |
334 | if (ret < 0) | |
335 | return; | |
336 | ||
337 | dev_dbg(&pdev->dev, "%s enable\n", __func__); | |
338 | ||
6e267da8 | 339 | /* power on */ |
b002ff6e KM |
340 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
341 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c | 342 | |
258485d9 KM |
343 | /* bus init */ |
344 | usbhsc_set_buswait(priv); | |
345 | usbhsc_bus_init(priv); | |
346 | ||
f1407d5c KM |
347 | /* module start */ |
348 | usbhs_mod_call(priv, start, priv); | |
349 | ||
350 | } else if (!enable && mod) { | |
351 | dev_dbg(&pdev->dev, "%s disable\n", __func__); | |
352 | ||
353 | /* module stop */ | |
354 | usbhs_mod_call(priv, stop, priv); | |
355 | ||
258485d9 KM |
356 | /* bus init */ |
357 | usbhsc_bus_init(priv); | |
358 | ||
6e267da8 | 359 | /* power off */ |
b002ff6e KM |
360 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
361 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
362 | |
363 | usbhs_mod_change(priv, -1); | |
364 | ||
365 | /* reset phy for next connection */ | |
366 | usbhs_platform_call(priv, phy_reset, pdev); | |
367 | } | |
368 | } | |
369 | ||
ca8a282a KM |
370 | /* |
371 | * notify hotplug | |
372 | */ | |
373 | static void usbhsc_notify_hotplug(struct work_struct *work) | |
374 | { | |
375 | struct usbhs_priv *priv = container_of(work, | |
376 | struct usbhs_priv, | |
377 | notify_hotplug_work.work); | |
378 | usbhsc_hotplug(priv); | |
379 | } | |
380 | ||
bc57381e | 381 | int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) |
f1407d5c | 382 | { |
206dcc2c | 383 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
bc57381e | 384 | int delay = usbhs_get_dparam(priv, detection_delay); |
f1407d5c KM |
385 | |
386 | /* | |
387 | * This functions will be called in interrupt. | |
388 | * To make sure safety context, | |
389 | * use workqueue for usbhs_notify_hotplug | |
390 | */ | |
bc57381e | 391 | schedule_delayed_work(&priv->notify_hotplug_work, delay); |
f1407d5c KM |
392 | return 0; |
393 | } | |
394 | ||
395 | /* | |
396 | * platform functions | |
397 | */ | |
b7a8d17d | 398 | static int usbhs_probe(struct platform_device *pdev) |
f1407d5c KM |
399 | { |
400 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; | |
401 | struct renesas_usbhs_driver_callback *dfunc; | |
402 | struct usbhs_priv *priv; | |
403 | struct resource *res; | |
404 | unsigned int irq; | |
405 | int ret; | |
406 | ||
407 | /* check platform information */ | |
408 | if (!info || | |
b002ff6e | 409 | !info->platform_callback.get_id) { |
f1407d5c KM |
410 | dev_err(&pdev->dev, "no platform information\n"); |
411 | return -EINVAL; | |
412 | } | |
413 | ||
414 | /* platform data */ | |
415 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
416 | irq = platform_get_irq(pdev, 0); | |
417 | if (!res || (int)irq <= 0) { | |
418 | dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); | |
419 | return -ENODEV; | |
420 | } | |
421 | ||
422 | /* usb private data */ | |
423 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
424 | if (!priv) { | |
425 | dev_err(&pdev->dev, "Could not allocate priv\n"); | |
426 | return -ENOMEM; | |
427 | } | |
428 | ||
429 | priv->base = ioremap_nocache(res->start, resource_size(res)); | |
430 | if (!priv->base) { | |
431 | dev_err(&pdev->dev, "ioremap error.\n"); | |
432 | ret = -ENOMEM; | |
433 | goto probe_end_kfree; | |
434 | } | |
435 | ||
436 | /* | |
437 | * care platform info | |
438 | */ | |
48298206 KM |
439 | memcpy(&priv->pfunc, |
440 | &info->platform_callback, | |
441 | sizeof(struct renesas_usbhs_platform_callback)); | |
442 | memcpy(&priv->dparam, | |
443 | &info->driver_param, | |
444 | sizeof(struct renesas_usbhs_driver_param)); | |
f1407d5c KM |
445 | |
446 | /* set driver callback functions for platform */ | |
447 | dfunc = &info->driver_callback; | |
448 | dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; | |
449 | ||
450 | /* set default param if platform doesn't have */ | |
48298206 KM |
451 | if (!priv->dparam.pipe_type) { |
452 | priv->dparam.pipe_type = usbhsc_default_pipe_type; | |
453 | priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); | |
f1407d5c | 454 | } |
48298206 KM |
455 | if (!priv->dparam.pio_dma_border) |
456 | priv->dparam.pio_dma_border = 64; /* 64byte */ | |
f1407d5c | 457 | |
b002ff6e KM |
458 | /* FIXME */ |
459 | /* runtime power control ? */ | |
48298206 | 460 | if (priv->pfunc.get_vbus) |
b002ff6e KM |
461 | usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); |
462 | ||
f1407d5c KM |
463 | /* |
464 | * priv settings | |
465 | */ | |
466 | priv->irq = irq; | |
467 | priv->pdev = pdev; | |
bc57381e | 468 | INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); |
f1407d5c KM |
469 | spin_lock_init(usbhs_priv_to_lock(priv)); |
470 | ||
471 | /* call pipe and module init */ | |
472 | ret = usbhs_pipe_probe(priv); | |
473 | if (ret < 0) | |
97f93227 | 474 | goto probe_end_iounmap; |
f1407d5c | 475 | |
d3af90a5 | 476 | ret = usbhs_fifo_probe(priv); |
f1407d5c | 477 | if (ret < 0) |
97f93227 | 478 | goto probe_end_pipe_exit; |
f1407d5c | 479 | |
d3af90a5 KM |
480 | ret = usbhs_mod_probe(priv); |
481 | if (ret < 0) | |
482 | goto probe_end_fifo_exit; | |
483 | ||
f1407d5c KM |
484 | /* dev_set_drvdata should be called after usbhs_mod_init */ |
485 | dev_set_drvdata(&pdev->dev, priv); | |
486 | ||
487 | /* | |
488 | * deviece reset here because | |
489 | * USB device might be used in boot loader. | |
490 | */ | |
491 | usbhs_sys_clock_ctrl(priv, 0); | |
492 | ||
493 | /* | |
494 | * platform call | |
495 | * | |
496 | * USB phy setup might depend on CPU/Board. | |
497 | * If platform has its callback functions, | |
498 | * call it here. | |
499 | */ | |
500 | ret = usbhs_platform_call(priv, hardware_init, pdev); | |
501 | if (ret < 0) { | |
502 | dev_err(&pdev->dev, "platform prove failed.\n"); | |
97f93227 | 503 | goto probe_end_mod_exit; |
f1407d5c KM |
504 | } |
505 | ||
506 | /* reset phy for connection */ | |
507 | usbhs_platform_call(priv, phy_reset, pdev); | |
508 | ||
b002ff6e KM |
509 | /* power control */ |
510 | pm_runtime_enable(&pdev->dev); | |
511 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { | |
512 | usbhsc_power_ctrl(priv, 1); | |
513 | usbhs_mod_autonomy_mode(priv); | |
514 | } | |
515 | ||
f1407d5c KM |
516 | /* |
517 | * manual call notify_hotplug for cold plug | |
518 | */ | |
f1407d5c KM |
519 | ret = usbhsc_drvcllbck_notify_hotplug(pdev); |
520 | if (ret < 0) | |
521 | goto probe_end_call_remove; | |
522 | ||
523 | dev_info(&pdev->dev, "probed\n"); | |
524 | ||
525 | return ret; | |
526 | ||
527 | probe_end_call_remove: | |
528 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c KM |
529 | probe_end_mod_exit: |
530 | usbhs_mod_remove(priv); | |
d3af90a5 KM |
531 | probe_end_fifo_exit: |
532 | usbhs_fifo_remove(priv); | |
97f93227 KM |
533 | probe_end_pipe_exit: |
534 | usbhs_pipe_remove(priv); | |
f1407d5c KM |
535 | probe_end_iounmap: |
536 | iounmap(priv->base); | |
537 | probe_end_kfree: | |
538 | kfree(priv); | |
539 | ||
540 | dev_info(&pdev->dev, "probe failed\n"); | |
541 | ||
542 | return ret; | |
543 | } | |
544 | ||
545 | static int __devexit usbhs_remove(struct platform_device *pdev) | |
546 | { | |
206dcc2c | 547 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
af32fe51 KM |
548 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; |
549 | struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; | |
f1407d5c KM |
550 | |
551 | dev_dbg(&pdev->dev, "usb remove\n"); | |
552 | ||
af32fe51 KM |
553 | dfunc->notify_hotplug = NULL; |
554 | ||
b002ff6e KM |
555 | /* power off */ |
556 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
557 | usbhsc_power_ctrl(priv, 0); | |
f1407d5c | 558 | |
b002ff6e | 559 | pm_runtime_disable(&pdev->dev); |
f1407d5c KM |
560 | |
561 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c | 562 | usbhs_mod_remove(priv); |
d3af90a5 | 563 | usbhs_fifo_remove(priv); |
97f93227 | 564 | usbhs_pipe_remove(priv); |
f1407d5c KM |
565 | iounmap(priv->base); |
566 | kfree(priv); | |
567 | ||
568 | return 0; | |
569 | } | |
570 | ||
ca8a282a KM |
571 | static int usbhsc_suspend(struct device *dev) |
572 | { | |
573 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
574 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
575 | ||
576 | if (mod) { | |
577 | usbhs_mod_call(priv, stop, priv); | |
578 | usbhs_mod_change(priv, -1); | |
579 | } | |
580 | ||
581 | if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
582 | usbhsc_power_ctrl(priv, 0); | |
583 | ||
584 | return 0; | |
585 | } | |
586 | ||
587 | static int usbhsc_resume(struct device *dev) | |
588 | { | |
589 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
590 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
591 | ||
592 | usbhs_platform_call(priv, phy_reset, pdev); | |
593 | ||
594 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
595 | usbhsc_power_ctrl(priv, 1); | |
596 | ||
597 | usbhsc_hotplug(priv); | |
598 | ||
599 | return 0; | |
600 | } | |
601 | ||
602 | static int usbhsc_runtime_nop(struct device *dev) | |
603 | { | |
604 | /* Runtime PM callback shared between ->runtime_suspend() | |
605 | * and ->runtime_resume(). Simply returns success. | |
606 | * | |
607 | * This driver re-initializes all registers after | |
608 | * pm_runtime_get_sync() anyway so there is no need | |
609 | * to save and restore registers here. | |
610 | */ | |
611 | return 0; | |
612 | } | |
613 | ||
614 | static const struct dev_pm_ops usbhsc_pm_ops = { | |
615 | .suspend = usbhsc_suspend, | |
616 | .resume = usbhsc_resume, | |
617 | .runtime_suspend = usbhsc_runtime_nop, | |
618 | .runtime_resume = usbhsc_runtime_nop, | |
619 | }; | |
620 | ||
f1407d5c KM |
621 | static struct platform_driver renesas_usbhs_driver = { |
622 | .driver = { | |
623 | .name = "renesas_usbhs", | |
ca8a282a | 624 | .pm = &usbhsc_pm_ops, |
f1407d5c KM |
625 | }, |
626 | .probe = usbhs_probe, | |
627 | .remove = __devexit_p(usbhs_remove), | |
628 | }; | |
629 | ||
630 | static int __init usbhs_init(void) | |
631 | { | |
632 | return platform_driver_register(&renesas_usbhs_driver); | |
633 | } | |
634 | ||
635 | static void __exit usbhs_exit(void) | |
636 | { | |
637 | platform_driver_unregister(&renesas_usbhs_driver); | |
638 | } | |
639 | ||
640 | module_init(usbhs_init); | |
641 | module_exit(usbhs_exit); | |
642 | ||
643 | MODULE_LICENSE("GPL"); | |
644 | MODULE_DESCRIPTION("Renesas USB driver"); | |
645 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |