Commit | Line | Data |
---|---|---|
f1407d5c KM |
1 | /* |
2 | * Renesas USB driver | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
15 | * | |
16 | */ | |
17 | #include <linux/io.h> | |
18 | #include <linux/module.h> | |
19 | #include <linux/pm_runtime.h> | |
20 | #include <linux/slab.h> | |
21 | #include <linux/sysfs.h> | |
22 | #include "./common.h" | |
23 | ||
233f519d KM |
24 | /* |
25 | * image of renesas_usbhs | |
26 | * | |
27 | * ex) gadget case | |
28 | ||
29 | * mod.c | |
30 | * mod_gadget.c | |
31 | * mod_host.c pipe.c fifo.c | |
32 | * | |
33 | * +-------+ +-----------+ | |
34 | * | pipe0 |------>| fifo pio | | |
35 | * +------------+ +-------+ +-----------+ | |
36 | * | mod_gadget |=====> | pipe1 |--+ | |
37 | * +------------+ +-------+ | +-----------+ | |
38 | * | pipe2 | | +-| fifo dma0 | | |
39 | * +------------+ +-------+ | | +-----------+ | |
40 | * | mod_host | | pipe3 |<-|--+ | |
41 | * +------------+ +-------+ | +-----------+ | |
42 | * | .... | +--->| fifo dma1 | | |
43 | * | .... | +-----------+ | |
44 | */ | |
45 | ||
46 | ||
b002ff6e KM |
47 | #define USBHSF_RUNTIME_PWCTRL (1 << 0) |
48 | ||
49 | /* status */ | |
50 | #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) | |
51 | #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) | |
52 | #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) | |
53 | #define usbhsc_flags_has(p, b) ((p)->flags & (b)) | |
54 | ||
f1407d5c KM |
55 | /* |
56 | * platform call back | |
57 | * | |
58 | * renesas usb support platform callback function. | |
59 | * Below macro call it. | |
60 | * if platform doesn't have callback, it return 0 (no error) | |
61 | */ | |
62 | #define usbhs_platform_call(priv, func, args...)\ | |
63 | (!(priv) ? -ENODEV : \ | |
48298206 KM |
64 | !((priv)->pfunc.func) ? 0 : \ |
65 | (priv)->pfunc.func(args)) | |
f1407d5c KM |
66 | |
67 | /* | |
68 | * common functions | |
69 | */ | |
70 | u16 usbhs_read(struct usbhs_priv *priv, u32 reg) | |
71 | { | |
72 | return ioread16(priv->base + reg); | |
73 | } | |
74 | ||
75 | void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) | |
76 | { | |
77 | iowrite16(data, priv->base + reg); | |
78 | } | |
79 | ||
80 | void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) | |
81 | { | |
82 | u16 val = usbhs_read(priv, reg); | |
83 | ||
84 | val &= ~mask; | |
85 | val |= data & mask; | |
86 | ||
87 | usbhs_write(priv, reg, val); | |
88 | } | |
89 | ||
206dcc2c KM |
90 | struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) |
91 | { | |
92 | return dev_get_drvdata(&pdev->dev); | |
93 | } | |
94 | ||
f1407d5c KM |
95 | /* |
96 | * syscfg functions | |
97 | */ | |
98 | void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) | |
99 | { | |
100 | usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); | |
101 | } | |
102 | ||
103 | void usbhs_sys_hispeed_ctrl(struct usbhs_priv *priv, int enable) | |
104 | { | |
105 | usbhs_bset(priv, SYSCFG, HSE, enable ? HSE : 0); | |
106 | } | |
107 | ||
108 | void usbhs_sys_usb_ctrl(struct usbhs_priv *priv, int enable) | |
109 | { | |
110 | usbhs_bset(priv, SYSCFG, USBE, enable ? USBE : 0); | |
111 | } | |
112 | ||
113 | void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) | |
114 | { | |
115 | u16 mask = DCFM | DRPD | DPRPU; | |
116 | u16 val = DCFM | DRPD; | |
f427eb64 KM |
117 | int has_otg = usbhs_get_dparam(priv, has_otg); |
118 | ||
119 | if (has_otg) | |
120 | usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); | |
f1407d5c KM |
121 | |
122 | /* | |
123 | * if enable | |
124 | * | |
125 | * - select Host mode | |
126 | * - D+ Line/D- Line Pull-down | |
127 | */ | |
128 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
129 | } | |
130 | ||
131 | void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) | |
132 | { | |
133 | u16 mask = DCFM | DRPD | DPRPU; | |
134 | u16 val = DPRPU; | |
135 | ||
136 | /* | |
137 | * if enable | |
138 | * | |
139 | * - select Function mode | |
140 | * - D+ Line Pull-up | |
141 | */ | |
142 | usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); | |
143 | } | |
144 | ||
145 | /* | |
146 | * frame functions | |
147 | */ | |
148 | int usbhs_frame_get_num(struct usbhs_priv *priv) | |
149 | { | |
150 | return usbhs_read(priv, FRMNUM) & FRNM_MASK; | |
151 | } | |
152 | ||
ef8bedb9 KM |
153 | /* |
154 | * usb request functions | |
155 | */ | |
156 | void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
157 | { | |
158 | u16 val; | |
159 | ||
160 | val = usbhs_read(priv, USBREQ); | |
161 | req->bRequest = (val >> 8) & 0xFF; | |
162 | req->bRequestType = (val >> 0) & 0xFF; | |
163 | ||
164 | req->wValue = usbhs_read(priv, USBVAL); | |
165 | req->wIndex = usbhs_read(priv, USBINDX); | |
166 | req->wLength = usbhs_read(priv, USBLENG); | |
167 | } | |
168 | ||
169 | void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) | |
170 | { | |
171 | usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); | |
172 | usbhs_write(priv, USBVAL, req->wValue); | |
173 | usbhs_write(priv, USBINDX, req->wIndex); | |
174 | usbhs_write(priv, USBLENG, req->wLength); | |
175 | ||
176 | usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); | |
177 | } | |
178 | ||
258485d9 KM |
179 | /* |
180 | * bus/vbus functions | |
181 | */ | |
182 | void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) | |
183 | { | |
a9be4a45 KM |
184 | u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); |
185 | ||
186 | if (status != USBRST) { | |
187 | struct device *dev = usbhs_priv_to_dev(priv); | |
188 | dev_err(dev, "usbhs should be reset\n"); | |
189 | } | |
190 | ||
258485d9 KM |
191 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); |
192 | } | |
193 | ||
194 | void usbhs_bus_send_reset(struct usbhs_priv *priv) | |
195 | { | |
196 | usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); | |
197 | } | |
198 | ||
75587f52 KM |
199 | int usbhs_bus_get_speed(struct usbhs_priv *priv) |
200 | { | |
201 | u16 dvstctr = usbhs_read(priv, DVSTCTR); | |
202 | ||
203 | switch (RHST & dvstctr) { | |
204 | case RHST_LOW_SPEED: | |
205 | return USB_SPEED_LOW; | |
206 | case RHST_FULL_SPEED: | |
207 | return USB_SPEED_FULL; | |
208 | case RHST_HIGH_SPEED: | |
209 | return USB_SPEED_HIGH; | |
210 | } | |
211 | ||
212 | return USB_SPEED_UNKNOWN; | |
213 | } | |
214 | ||
258485d9 KM |
215 | int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) |
216 | { | |
217 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
218 | ||
219 | return usbhs_platform_call(priv, set_vbus, pdev, enable); | |
220 | } | |
221 | ||
222 | static void usbhsc_bus_init(struct usbhs_priv *priv) | |
223 | { | |
224 | usbhs_write(priv, DVSTCTR, 0); | |
225 | ||
226 | usbhs_vbus_ctrl(priv, 0); | |
227 | } | |
228 | ||
eb05191f KM |
229 | /* |
230 | * device configuration | |
231 | */ | |
232 | int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum, | |
233 | u16 upphub, u16 hubport, u16 speed) | |
234 | { | |
235 | struct device *dev = usbhs_priv_to_dev(priv); | |
236 | u16 usbspd = 0; | |
237 | u32 reg = DEVADD0 + (2 * devnum); | |
238 | ||
239 | if (devnum > 10) { | |
240 | dev_err(dev, "cannot set speed to unknown device %d\n", devnum); | |
241 | return -EIO; | |
242 | } | |
243 | ||
244 | if (upphub > 0xA) { | |
245 | dev_err(dev, "unsupported hub number %d\n", upphub); | |
246 | return -EIO; | |
247 | } | |
248 | ||
249 | switch (speed) { | |
250 | case USB_SPEED_LOW: | |
251 | usbspd = USBSPD_SPEED_LOW; | |
252 | break; | |
253 | case USB_SPEED_FULL: | |
254 | usbspd = USBSPD_SPEED_FULL; | |
255 | break; | |
256 | case USB_SPEED_HIGH: | |
257 | usbspd = USBSPD_SPEED_HIGH; | |
258 | break; | |
259 | default: | |
260 | dev_err(dev, "unsupported speed %d\n", speed); | |
261 | return -EIO; | |
262 | } | |
263 | ||
264 | usbhs_write(priv, reg, UPPHUB(upphub) | | |
265 | HUBPORT(hubport)| | |
266 | USBSPD(usbspd)); | |
267 | ||
268 | return 0; | |
269 | } | |
270 | ||
f1407d5c KM |
271 | /* |
272 | * local functions | |
273 | */ | |
11935de5 | 274 | static void usbhsc_set_buswait(struct usbhs_priv *priv) |
f1407d5c KM |
275 | { |
276 | int wait = usbhs_get_dparam(priv, buswait_bwait); | |
f1407d5c | 277 | |
11935de5 KM |
278 | /* set bus wait if platform have */ |
279 | if (wait) | |
280 | usbhs_bset(priv, BUSWAIT, 0x000F, wait); | |
f1407d5c KM |
281 | } |
282 | ||
283 | /* | |
284 | * platform default param | |
285 | */ | |
286 | static u32 usbhsc_default_pipe_type[] = { | |
287 | USB_ENDPOINT_XFER_CONTROL, | |
288 | USB_ENDPOINT_XFER_ISOC, | |
289 | USB_ENDPOINT_XFER_ISOC, | |
290 | USB_ENDPOINT_XFER_BULK, | |
291 | USB_ENDPOINT_XFER_BULK, | |
292 | USB_ENDPOINT_XFER_BULK, | |
293 | USB_ENDPOINT_XFER_INT, | |
294 | USB_ENDPOINT_XFER_INT, | |
295 | USB_ENDPOINT_XFER_INT, | |
296 | USB_ENDPOINT_XFER_INT, | |
297 | }; | |
298 | ||
299 | /* | |
6e267da8 KM |
300 | * power control |
301 | */ | |
302 | static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) | |
303 | { | |
304 | struct device *dev = usbhs_priv_to_dev(priv); | |
305 | ||
306 | if (enable) { | |
307 | /* enable PM */ | |
308 | pm_runtime_get_sync(dev); | |
309 | ||
310 | /* USB on */ | |
311 | usbhs_sys_clock_ctrl(priv, enable); | |
6e267da8 KM |
312 | } else { |
313 | /* USB off */ | |
6e267da8 KM |
314 | usbhs_sys_clock_ctrl(priv, enable); |
315 | ||
316 | /* disable PM */ | |
317 | pm_runtime_put_sync(dev); | |
318 | } | |
319 | } | |
320 | ||
321 | /* | |
ca8a282a | 322 | * hotplug |
f1407d5c | 323 | */ |
ca8a282a | 324 | static void usbhsc_hotplug(struct usbhs_priv *priv) |
f1407d5c | 325 | { |
f1407d5c KM |
326 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
327 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
328 | int id; | |
329 | int enable; | |
330 | int ret; | |
331 | ||
332 | /* | |
333 | * get vbus status from platform | |
334 | */ | |
335 | enable = usbhs_platform_call(priv, get_vbus, pdev); | |
336 | ||
337 | /* | |
338 | * get id from platform | |
339 | */ | |
340 | id = usbhs_platform_call(priv, get_id, pdev); | |
341 | ||
342 | if (enable && !mod) { | |
343 | ret = usbhs_mod_change(priv, id); | |
344 | if (ret < 0) | |
345 | return; | |
346 | ||
347 | dev_dbg(&pdev->dev, "%s enable\n", __func__); | |
348 | ||
6e267da8 | 349 | /* power on */ |
b002ff6e KM |
350 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
351 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c | 352 | |
258485d9 KM |
353 | /* bus init */ |
354 | usbhsc_set_buswait(priv); | |
355 | usbhsc_bus_init(priv); | |
356 | ||
f1407d5c KM |
357 | /* module start */ |
358 | usbhs_mod_call(priv, start, priv); | |
359 | ||
360 | } else if (!enable && mod) { | |
361 | dev_dbg(&pdev->dev, "%s disable\n", __func__); | |
362 | ||
363 | /* module stop */ | |
364 | usbhs_mod_call(priv, stop, priv); | |
365 | ||
258485d9 KM |
366 | /* bus init */ |
367 | usbhsc_bus_init(priv); | |
368 | ||
6e267da8 | 369 | /* power off */ |
b002ff6e KM |
370 | if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) |
371 | usbhsc_power_ctrl(priv, enable); | |
f1407d5c KM |
372 | |
373 | usbhs_mod_change(priv, -1); | |
374 | ||
375 | /* reset phy for next connection */ | |
376 | usbhs_platform_call(priv, phy_reset, pdev); | |
377 | } | |
378 | } | |
379 | ||
ca8a282a KM |
380 | /* |
381 | * notify hotplug | |
382 | */ | |
383 | static void usbhsc_notify_hotplug(struct work_struct *work) | |
384 | { | |
385 | struct usbhs_priv *priv = container_of(work, | |
386 | struct usbhs_priv, | |
387 | notify_hotplug_work.work); | |
388 | usbhsc_hotplug(priv); | |
389 | } | |
390 | ||
bc57381e | 391 | int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) |
f1407d5c | 392 | { |
206dcc2c | 393 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
bc57381e | 394 | int delay = usbhs_get_dparam(priv, detection_delay); |
f1407d5c KM |
395 | |
396 | /* | |
397 | * This functions will be called in interrupt. | |
398 | * To make sure safety context, | |
399 | * use workqueue for usbhs_notify_hotplug | |
400 | */ | |
bc57381e | 401 | schedule_delayed_work(&priv->notify_hotplug_work, delay); |
f1407d5c KM |
402 | return 0; |
403 | } | |
404 | ||
405 | /* | |
406 | * platform functions | |
407 | */ | |
b7a8d17d | 408 | static int usbhs_probe(struct platform_device *pdev) |
f1407d5c KM |
409 | { |
410 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; | |
411 | struct renesas_usbhs_driver_callback *dfunc; | |
412 | struct usbhs_priv *priv; | |
413 | struct resource *res; | |
414 | unsigned int irq; | |
415 | int ret; | |
416 | ||
417 | /* check platform information */ | |
418 | if (!info || | |
b002ff6e | 419 | !info->platform_callback.get_id) { |
f1407d5c KM |
420 | dev_err(&pdev->dev, "no platform information\n"); |
421 | return -EINVAL; | |
422 | } | |
423 | ||
424 | /* platform data */ | |
425 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
426 | irq = platform_get_irq(pdev, 0); | |
427 | if (!res || (int)irq <= 0) { | |
428 | dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); | |
429 | return -ENODEV; | |
430 | } | |
431 | ||
432 | /* usb private data */ | |
433 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
434 | if (!priv) { | |
435 | dev_err(&pdev->dev, "Could not allocate priv\n"); | |
436 | return -ENOMEM; | |
437 | } | |
438 | ||
439 | priv->base = ioremap_nocache(res->start, resource_size(res)); | |
440 | if (!priv->base) { | |
441 | dev_err(&pdev->dev, "ioremap error.\n"); | |
442 | ret = -ENOMEM; | |
443 | goto probe_end_kfree; | |
444 | } | |
445 | ||
446 | /* | |
447 | * care platform info | |
448 | */ | |
48298206 KM |
449 | memcpy(&priv->pfunc, |
450 | &info->platform_callback, | |
451 | sizeof(struct renesas_usbhs_platform_callback)); | |
452 | memcpy(&priv->dparam, | |
453 | &info->driver_param, | |
454 | sizeof(struct renesas_usbhs_driver_param)); | |
f1407d5c KM |
455 | |
456 | /* set driver callback functions for platform */ | |
457 | dfunc = &info->driver_callback; | |
458 | dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; | |
459 | ||
460 | /* set default param if platform doesn't have */ | |
48298206 KM |
461 | if (!priv->dparam.pipe_type) { |
462 | priv->dparam.pipe_type = usbhsc_default_pipe_type; | |
463 | priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); | |
f1407d5c | 464 | } |
48298206 KM |
465 | if (!priv->dparam.pio_dma_border) |
466 | priv->dparam.pio_dma_border = 64; /* 64byte */ | |
f1407d5c | 467 | |
b002ff6e KM |
468 | /* FIXME */ |
469 | /* runtime power control ? */ | |
48298206 | 470 | if (priv->pfunc.get_vbus) |
b002ff6e KM |
471 | usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); |
472 | ||
f1407d5c KM |
473 | /* |
474 | * priv settings | |
475 | */ | |
476 | priv->irq = irq; | |
477 | priv->pdev = pdev; | |
bc57381e | 478 | INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); |
f1407d5c KM |
479 | spin_lock_init(usbhs_priv_to_lock(priv)); |
480 | ||
481 | /* call pipe and module init */ | |
482 | ret = usbhs_pipe_probe(priv); | |
483 | if (ret < 0) | |
97f93227 | 484 | goto probe_end_iounmap; |
f1407d5c | 485 | |
d3af90a5 | 486 | ret = usbhs_fifo_probe(priv); |
f1407d5c | 487 | if (ret < 0) |
97f93227 | 488 | goto probe_end_pipe_exit; |
f1407d5c | 489 | |
d3af90a5 KM |
490 | ret = usbhs_mod_probe(priv); |
491 | if (ret < 0) | |
492 | goto probe_end_fifo_exit; | |
493 | ||
f1407d5c KM |
494 | /* dev_set_drvdata should be called after usbhs_mod_init */ |
495 | dev_set_drvdata(&pdev->dev, priv); | |
496 | ||
497 | /* | |
498 | * deviece reset here because | |
499 | * USB device might be used in boot loader. | |
500 | */ | |
501 | usbhs_sys_clock_ctrl(priv, 0); | |
502 | ||
503 | /* | |
504 | * platform call | |
505 | * | |
506 | * USB phy setup might depend on CPU/Board. | |
507 | * If platform has its callback functions, | |
508 | * call it here. | |
509 | */ | |
510 | ret = usbhs_platform_call(priv, hardware_init, pdev); | |
511 | if (ret < 0) { | |
512 | dev_err(&pdev->dev, "platform prove failed.\n"); | |
97f93227 | 513 | goto probe_end_mod_exit; |
f1407d5c KM |
514 | } |
515 | ||
516 | /* reset phy for connection */ | |
517 | usbhs_platform_call(priv, phy_reset, pdev); | |
518 | ||
b002ff6e KM |
519 | /* power control */ |
520 | pm_runtime_enable(&pdev->dev); | |
521 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { | |
522 | usbhsc_power_ctrl(priv, 1); | |
523 | usbhs_mod_autonomy_mode(priv); | |
524 | } | |
525 | ||
f1407d5c KM |
526 | /* |
527 | * manual call notify_hotplug for cold plug | |
528 | */ | |
f1407d5c KM |
529 | ret = usbhsc_drvcllbck_notify_hotplug(pdev); |
530 | if (ret < 0) | |
531 | goto probe_end_call_remove; | |
532 | ||
533 | dev_info(&pdev->dev, "probed\n"); | |
534 | ||
535 | return ret; | |
536 | ||
537 | probe_end_call_remove: | |
538 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c KM |
539 | probe_end_mod_exit: |
540 | usbhs_mod_remove(priv); | |
d3af90a5 KM |
541 | probe_end_fifo_exit: |
542 | usbhs_fifo_remove(priv); | |
97f93227 KM |
543 | probe_end_pipe_exit: |
544 | usbhs_pipe_remove(priv); | |
f1407d5c KM |
545 | probe_end_iounmap: |
546 | iounmap(priv->base); | |
547 | probe_end_kfree: | |
548 | kfree(priv); | |
549 | ||
550 | dev_info(&pdev->dev, "probe failed\n"); | |
551 | ||
552 | return ret; | |
553 | } | |
554 | ||
555 | static int __devexit usbhs_remove(struct platform_device *pdev) | |
556 | { | |
206dcc2c | 557 | struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
af32fe51 KM |
558 | struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; |
559 | struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; | |
f1407d5c KM |
560 | |
561 | dev_dbg(&pdev->dev, "usb remove\n"); | |
562 | ||
af32fe51 KM |
563 | dfunc->notify_hotplug = NULL; |
564 | ||
b002ff6e KM |
565 | /* power off */ |
566 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
567 | usbhsc_power_ctrl(priv, 0); | |
f1407d5c | 568 | |
b002ff6e | 569 | pm_runtime_disable(&pdev->dev); |
f1407d5c KM |
570 | |
571 | usbhs_platform_call(priv, hardware_exit, pdev); | |
f1407d5c | 572 | usbhs_mod_remove(priv); |
d3af90a5 | 573 | usbhs_fifo_remove(priv); |
97f93227 | 574 | usbhs_pipe_remove(priv); |
f1407d5c KM |
575 | iounmap(priv->base); |
576 | kfree(priv); | |
577 | ||
578 | return 0; | |
579 | } | |
580 | ||
ca8a282a KM |
581 | static int usbhsc_suspend(struct device *dev) |
582 | { | |
583 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
584 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
585 | ||
586 | if (mod) { | |
587 | usbhs_mod_call(priv, stop, priv); | |
588 | usbhs_mod_change(priv, -1); | |
589 | } | |
590 | ||
591 | if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
592 | usbhsc_power_ctrl(priv, 0); | |
593 | ||
594 | return 0; | |
595 | } | |
596 | ||
597 | static int usbhsc_resume(struct device *dev) | |
598 | { | |
599 | struct usbhs_priv *priv = dev_get_drvdata(dev); | |
600 | struct platform_device *pdev = usbhs_priv_to_pdev(priv); | |
601 | ||
602 | usbhs_platform_call(priv, phy_reset, pdev); | |
603 | ||
604 | if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) | |
605 | usbhsc_power_ctrl(priv, 1); | |
606 | ||
607 | usbhsc_hotplug(priv); | |
608 | ||
609 | return 0; | |
610 | } | |
611 | ||
612 | static int usbhsc_runtime_nop(struct device *dev) | |
613 | { | |
614 | /* Runtime PM callback shared between ->runtime_suspend() | |
615 | * and ->runtime_resume(). Simply returns success. | |
616 | * | |
617 | * This driver re-initializes all registers after | |
618 | * pm_runtime_get_sync() anyway so there is no need | |
619 | * to save and restore registers here. | |
620 | */ | |
621 | return 0; | |
622 | } | |
623 | ||
624 | static const struct dev_pm_ops usbhsc_pm_ops = { | |
625 | .suspend = usbhsc_suspend, | |
626 | .resume = usbhsc_resume, | |
627 | .runtime_suspend = usbhsc_runtime_nop, | |
628 | .runtime_resume = usbhsc_runtime_nop, | |
629 | }; | |
630 | ||
f1407d5c KM |
631 | static struct platform_driver renesas_usbhs_driver = { |
632 | .driver = { | |
633 | .name = "renesas_usbhs", | |
ca8a282a | 634 | .pm = &usbhsc_pm_ops, |
f1407d5c KM |
635 | }, |
636 | .probe = usbhs_probe, | |
637 | .remove = __devexit_p(usbhs_remove), | |
638 | }; | |
639 | ||
640 | static int __init usbhs_init(void) | |
641 | { | |
642 | return platform_driver_register(&renesas_usbhs_driver); | |
643 | } | |
644 | ||
645 | static void __exit usbhs_exit(void) | |
646 | { | |
647 | platform_driver_unregister(&renesas_usbhs_driver); | |
648 | } | |
649 | ||
650 | module_init(usbhs_init); | |
651 | module_exit(usbhs_exit); | |
652 | ||
653 | MODULE_LICENSE("GPL"); | |
654 | MODULE_DESCRIPTION("Renesas USB driver"); | |
655 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |