Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
-What: /sys/block/rssd*/registers
-Date: March 2012
-KernelVersion: 3.3
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps below driver information and
- hardware registers.
- - S ACTive
- - Command Issue
- - Completed
- - PORT IRQ STAT
- - HOST IRQ STAT
- - Allocated
- - Commands in Q
-
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.
-
-What: /sys/block/rssd*/flags
-Date: May 2012
-KernelVersion: 3.5
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps the flags in port and driver
- data structure
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
normal operation. Y may be suppressed if all outputs are
controlled together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
<row id="V4L2-PIX-FMT-Y4">
<entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
<entry>'Y04 '</entry>
- <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+ <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
<row id="V4L2-PIX-FMT-Y6">
<entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
<entry>'Y06 '</entry>
- <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+ <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
</tbody>
&sub-g-tuner;
&sub-log-status;
&sub-overlay;
+ &sub-prepare-buf;
&sub-qbuf;
&sub-querybuf;
&sub-querycap;
&sub-query-dv-preset;
&sub-query-dv-timings;
&sub-querystd;
- &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
/></entry>
</row>
<row>
- <entry>__u32</entry>
+ <entry>struct v4l2_format</entry>
<entry><structfield>format</structfield></entry>
- <entry>Filled in by the application, preserved by the driver.
- See <xref linkend="v4l2-format" />.</entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
</row>
<row>
<entry>__u32</entry>
<row>
<entry></entry>
<entry>&v4l2-event-frame-sync;</entry>
- <entry><structfield>frame</structfield></entry>
+ <entry><structfield>frame_sync</structfield></entry>
<entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
</row>
<row>
Document Author
---------------
- Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
Construction Parameters
=======================
- <version> <dev> <hash_dev> <hash_start>
+ <version> <dev> <hash_dev>
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
<version>
- This is the version number of the on-disk format.
+ This is the type of the on-disk hash format.
0 is the original format used in the Chromium OS.
- The salt is appended when hashing, digests are stored continuously and
- the rest of the block is padded with zeros.
+ The salt is appended when hashing, digests are stored continuously and
+ the rest of the block is padded with zeros.
1 is the current format that should be used for new devices.
- The salt is prepended when hashing and each digest is
- padded with zeros to the power of two.
+ The salt is prepended when hashing and each digest is
+ padded with zeros to the power of two.
<dev>
- This is the device containing the data the integrity of which needs to be
+ This is the device containing data, the integrity of which needs to be
checked. It may be specified as a path, like /dev/sdaX, or a device number,
<major>:<minor>.
<hash_dev>
- This is the device that that supplies the hash tree data. It may be
+ This is the device that supplies the hash tree data. It may be
specified similarly to the device path and may be the same device. If the
- same device is used, the hash_start should be outside of the dm-verity
- configured device size.
+ same device is used, the hash_start should be outside the configured
+ dm-verity device.
<data_block_size>
- The block size on a data device. Each block corresponds to one digest on
- the hash device.
+ The block size on a data device in bytes.
+ Each block corresponds to one digest on the hash device.
<hash_block_size>
- The size of a hash block.
+ The size of a hash block in bytes.
<num_data_blocks>
The number of data blocks on the data device. Additional blocks are
Theory of operation
===================
-dm-verity is meant to be setup as part of a verified boot path. This
+dm-verity is meant to be set up as part of a verified boot path. This
may be anything ranging from a boot using tboot or trustedgrub to just
booting from a known-good device (like a USB drive or CD).
has been authenticated in some way (cryptographic signatures, etc).
After instantiation, all hashes will be verified on-demand during
disk access. If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail. This should identify
+tree, the root hash, then the I/O will fail. This should detect
tampering with any data on the device and the hash data.
Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis. This allows for a lightweight hash computation on first read
-into the page cache. Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
Hash Tree
---------
Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
-is of some block data on disk. If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
Each entry in the tree is a collection of neighboring nodes that fit in one
block. The number is determined based on block_size and the size of the
On-disk format
==============
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
- uint8_t signature[8]
- "verity\0\0";
-
- uint8_t version;
- 1 - current format
-
- uint8_t data_block_bits;
- log2(data block size)
-
- uint8_t hash_block_bits;
- log2(hash block size)
-
- uint8_t pad1[1];
- zero padding
-
- uint16_t salt_size;
- big-endian salt size
-
- uint8_t pad2[2];
- zero padding
-
- uint32_t data_blocks_hi;
- big-endian high 32 bits of the 64-bit number of data blocks
-
- uint32_t data_blocks_lo;
- big-endian low 32 bits of the 64-bit number of data blocks
-
- uint8_t algorithm[16];
- cryptographic algorithm
-
- uint8_t salt[384];
- salt (the salt size is specified above)
-
- uint8_t pad3[88];
- zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
Directly following the header (and with sector number padded to the next hash
block boundary) are the hash blocks which are stored a depth at a time
(starting from the root), sorted in order of increasing index.
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+ http://code.google.com/p/cryptsetup/wiki/DMVerity
+
Status
======
V (for Valid) is returned if every check performed so far was valid.
Example
=======
-
-Setup a device:
- dmsetup create vroot --table \
- "0 2097152 "\
- "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+ # dmsetup create vroot --readonly --table \
+ "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
"4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
"1234000000000000000000000000000000000000000000000000000000000000"
A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver. This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
- git://sources.redhat.com/git/lvm2
- http://sourceware.org/git/?p=lvm2.git
- http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
-
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
- 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
+
+Create hash on the device:
+ # veritysetup format /dev/sda1 /dev/sda2
+ ...
+ Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+ # veritysetup create vroot /dev/sda1 /dev/sda2 \
+ 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
Required properties:
- compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
Example:
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+ <&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
- wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
};
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
};
reg = <0x70010000 0x4000>;
interrupts = <36>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+ <&gpio3 25 0>; /* GPIO3_25 */
};
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
+ad Avionic Design GmbH
adi Analog Devices, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
--- /dev/null
+The execve system call can grant a newly-started program privileges that
+its parent did not have. The most obvious examples are setuid/setgid
+programs and file capabilities. To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child. For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+ a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+ /etc/passwd to be replaced from the point of view of a process that
+ inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve. Any task
+can set no_new_privs. Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset. With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call. For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode. (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve. An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+ execve and can change the behavior of newly-executed programs.
+ Unprivileged users are therefore only allowed to install such filters
+ if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+ available to an unprivileged user. If everything running with a
+ given uid has no_new_privs set, then that uid will be unable to
+ escalate its privileges by directly attacking setuid, setgid, and
+ fcap-using binaries; it will need to compromise something without the
+ no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set. In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+ be considered if they fix a notable performance or interactivity issue.
+ As these fixes are not as obvious and have a higher risk of a subtle
+ regression they should only be submitted by a distribution kernel
+ maintainer and include an addendum linking to a bugzilla entry if it
+ exists and additional information on the user-visible impact.
- New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
into the hash PTE second double word).
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
5. The kvm_run structure
------------------------
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
+T: git git://1984.lsi.us.es/nf
+T: git git://1984.lsi.us.es/nf-next
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
-M: Manohar Vanga <manohar.vanga@cern.ch>
+M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
- select EXYNOS4_DEV_DMA
+ select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom,
+ clk_max
};
static struct clk *clk[clk_max];
static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, mmdc_ch1_axi,
+ mmdc_ch0_axi, rom,
};
int __init mx6q_clocks_init(void)
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+++ /dev/null
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
gpmc_onenand_init(&board_onenand_data);
}
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
- } else if (cpu_is_omap446x()) {
+ } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
+
+ if (cpu_is_omap447x())
+ pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* SDHI0 PORT172 card-detect IRQ26 */
+ gpio_request(GPIO_FN_IRQ26_172, NULL);
+
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219,
+ MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+ MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ /* route all interrupts to ARM */
+ __raw_writel(0xffffffff, INT2NTSR0);
+ __raw_writel(0x3fffffff, INT2NTSR1);
+
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
#define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{
},
};
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
return NULL;
while (count) {
- int j, order = __ffs(count);
+ int j, order = __fls(count);
pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
while (!pages[i] && order)
#ifdef CONFIG_ZONE_DMA
extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
+#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- if (s3c2410_wdtclk)
+ if (!IS_ERR(s3c2410_wdtclk))
clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#if defined(__H8300H__)
#define CPU "H8/300H"
char __initdata command_line[COMMAND_LINE_SIZE];
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);
memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
#endif
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
- "STACK=0x%06x-0x%06x\n",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end,
- (int) memory_end, (int) &_ramend);
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+ "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+ __bss_stop);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+ "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+ memory_end, memory_end, &_ramend);
#endif
#ifdef CONFIG_DEFAULT_CMDLINE
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#undef DEBUG
int codek = 0, datak = 0, initk = 0;
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
+ initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
- extern char __init_begin, __init_end;
/*
* the following code should be cool even if these sections
* are not page aligned.
*/
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
/* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)__init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
return MCF_CLK;
}
EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
/***************************************************************************/
/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
#define hard_irq_disable hard_irq_disable
+static inline bool lazy_irq_pending(void)
+{
+ return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
-#ifdef CONFIG_PREEMPT
clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
- li r0,_TIF_NEED_RESCHED /* bits to check */
ld r3,_MSR(r1)
ld r4,TI_FLAGS(r9)
- /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
- rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
- and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */
- bne do_work
-
-#else /* !CONFIG_PREEMPT */
- ld r3,_MSR(r1) /* Returning to user mode? */
andi. r3,r3,MSR_PR
- beq restore /* if not, just restore regs and return */
+ beq resume_kernel
/* Check current_thread_info()->flags */
+ andi. r0,r4,_TIF_USER_WORK_MASK
+ beq restore
+
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq 1f
+ bl .restore_interrupts
+ bl .schedule
+ b .ret_from_except_lite
+
+1: bl .save_nvgprs
+ bl .restore_interrupts
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_notify_resume
+ b .ret_from_except
+
+resume_kernel:
+#ifdef CONFIG_PREEMPT
+ /* Check if we need to preempt */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq+ restore
+ /* Check that preempt_count() == 0 and interrupts are enabled */
+ lwz r8,TI_PREEMPT(r9)
+ cmpwi cr1,r8,0
+ ld r0,SOFTE(r1)
+ cmpdi r0,0
+ crandc eq,cr1*4+eq,eq
+ bne restore
+
+ /*
+ * Here we are preempting the current task. We want to make
+ * sure we are soft-disabled first
+ */
+ SOFT_DISABLE_INTS(r3,r4)
+1: bl .preempt_schedule_irq
+
+ /* Re-test flags and eventually loop */
clrrdi r9,r1,THREAD_SHIFT
ld r4,TI_FLAGS(r9)
- andi. r0,r4,_TIF_USER_WORK_MASK
- bne do_work
-#endif /* !CONFIG_PREEMPT */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ bne 1b
+#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
fast_exc_return_irq:
#endif /* CONFIG_PPC_BOOK3E */
1: b .ret_from_except /* What else to do here ? */
-
-
-3:
-do_work:
-#ifdef CONFIG_PREEMPT
- andi. r0,r3,MSR_PR /* Returning to user mode? */
- bne user_work
- /* Check that preempt_count() == 0 and interrupts are enabled */
- lwz r8,TI_PREEMPT(r9)
- cmpwi cr1,r8,0
- ld r0,SOFTE(r1)
- cmpdi r0,0
- crandc eq,cr1*4+eq,eq
- bne restore
-
- /*
- * Here we are preempting the current task. We want to make
- * sure we are soft-disabled first
- */
- SOFT_DISABLE_INTS(r3,r4)
-1: bl .preempt_schedule_irq
-
- /* Re-test flags and eventually loop */
- clrrdi r9,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r9)
- andi. r0,r4,_TIF_NEED_RESCHED
- bne 1b
- b restore
-
-user_work:
-#endif /* CONFIG_PREEMPT */
-
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- bl .restore_interrupts
- bl .schedule
- b .ret_from_except_lite
-
-1: bl .save_nvgprs
- bl .restore_interrupts
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_notify_resume
- b .ret_from_except
-
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
* NOTE: This is called with interrupts hard disabled but not marked
* as such in paca->irq_happened, so we need to resync this.
*/
-void restore_interrupts(void)
+void notrace restore_interrupts(void)
{
if (irqs_disabled()) {
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
extern char opal_secondary_entry;
-static void prom_query_opal(void)
+static void __init prom_query_opal(void)
{
long rc;
prom_debug("prom_opal_hold_cpus: end...\n");
}
-static void prom_opal_takeover(void)
+static void __init prom_opal_takeover(void)
{
struct opal_secondary_data *data = &RELOC(opal_secondary_data);
struct opal_takeover_args *args = &data->args;
return err;
}
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
{
+ struct kvm *kvm = vcpu->kvm;
void *va;
unsigned long nb;
+ unsigned long gpa;
- vpap->update_pending = 0;
- va = NULL;
- if (vpap->next_gpa) {
- va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
- if (nb < vpap->len) {
- /*
- * If it's now too short, it must be that userspace
- * has changed the mappings underlying guest memory,
- * so unregister the region.
- */
+ /*
+ * We need to pin the page pointed to by vpap->next_gpa,
+ * but we can't call kvmppc_pin_guest_page under the lock
+ * as it does get_user_pages() and down_read(). So we
+ * have to drop the lock, pin the page, then get the lock
+ * again and check that a new area didn't get registered
+ * in the meantime.
+ */
+ for (;;) {
+ gpa = vpap->next_gpa;
+ spin_unlock(&vcpu->arch.vpa_update_lock);
+ va = NULL;
+ nb = 0;
+ if (gpa)
+ va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+ spin_lock(&vcpu->arch.vpa_update_lock);
+ if (gpa == vpap->next_gpa)
+ break;
+ /* sigh... unpin that one and try again */
+ if (va)
kvmppc_unpin_guest_page(kvm, va);
- va = NULL;
- }
+ }
+
+ vpap->update_pending = 0;
+ if (va && nb < vpap->len) {
+ /*
+ * If it's now too short, it must be that userspace
+ * has changed the mappings underlying guest memory,
+ * so unregister the region.
+ */
+ kvmppc_unpin_guest_page(kvm, va);
+ va = NULL;
}
if (vpap->pinned_addr)
kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
{
- struct kvm *kvm = vcpu->kvm;
-
spin_lock(&vcpu->arch.vpa_update_lock);
if (vcpu->arch.vpa.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
}
if (vcpu->arch.dtl.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
vcpu->arch.dtl_index = 0;
}
if (vcpu->arch.slb_shadow.update_pending)
- kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
spin_unlock(&vcpu->arch.vpa_update_lock);
}
struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
- int ptid, i;
+ int ptid, i, need_vpa_update;
/* don't start if any threads have a signal pending */
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ need_vpa_update = 0;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
if (signal_pending(vcpu->arch.run_task))
return 0;
+ need_vpa_update |= vcpu->arch.vpa.update_pending |
+ vcpu->arch.slb_shadow.update_pending |
+ vcpu->arch.dtl.update_pending;
+ }
+
+ /*
+ * Initialize *vc, in particular vc->vcore_state, so we can
+ * drop the vcore lock if necessary.
+ */
+ vc->n_woken = 0;
+ vc->nap_count = 0;
+ vc->entry_exit_count = 0;
+ vc->vcore_state = VCORE_RUNNING;
+ vc->in_guest = 0;
+ vc->napping_threads = 0;
+
+ /*
+ * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+ * which can't be called with any spinlocks held.
+ */
+ if (need_vpa_update) {
+ spin_unlock(&vc->lock);
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ kvmppc_update_vpas(vcpu);
+ spin_lock(&vc->lock);
+ }
/*
* Make sure we are running on thread 0, and that
if (vcpu->arch.ceded)
vcpu->arch.ptid = ptid++;
- vc->n_woken = 0;
- vc->nap_count = 0;
- vc->entry_exit_count = 0;
- vc->vcore_state = VCORE_RUNNING;
vc->stolen_tb += mftb() - vc->preempt_tb;
- vc->in_guest = 0;
vc->pcpu = smp_processor_id();
- vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
- if (vcpu->arch.vpa.update_pending ||
- vcpu->arch.slb_shadow.update_pending ||
- vcpu->arch.dtl.update_pending)
- kvmppc_update_vpas(vcpu);
kvmppc_create_dtl_entry(vcpu, vc);
}
/* Grab any remaining hw threads so they can't go into the kernel */
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
- const u32 *dm, *usm;
+ const u32 *uninitialized_var(dm), *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
mr r4, r_addr; \
li r6, SIZE; \
bl skb_copy_bits; \
+ nop; \
/* R3 = 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
mr r4, r_addr; \
li r5, SIZE; \
bl bpf_internal_load_pointer_neg_helper; \
+ nop; \
/* R3 != 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ld r0, 16(r1); \
tcep++;
}
- if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
while (npages--)
*(tcep++) = 0;
- if (tbl->it_type == TCE_PCI_SWINV_FREE)
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
};
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len);
+ enum kmsg_dump_reason reason);
static struct kmsg_dumper nvram_kmsg_dumper = {
.dump = oops_to_nvram
return 0;
}
-/*
- * Try to capture the last capture_len bytes of the printk buffer. Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
- const char *new_msgs, size_t new_len,
- char *captured, size_t capture_len)
-{
- if (new_len >= capture_len) {
- memcpy(captured, new_msgs + (new_len - capture_len),
- capture_len);
- return capture_len;
- } else {
- /* Grab the end of old_msgs. */
- size_t old_tail_len = min(old_len, capture_len - new_len);
- memcpy(captured, old_msgs + (old_len - old_tail_len),
- old_tail_len);
- memcpy(captured + old_tail_len, new_msgs, new_len);
- return old_tail_len + new_len;
- }
-}
-
/*
* Are we using the ibm,rtas-log for oops/panic reports? And if so,
* would logging this oops/panic overwrite an RTAS event that rtas_errd
NVRAM_RTAS_READ_TIMEOUT);
}
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
- char *in, *out, *buf_end = buf + len;
- /* Assume a <n> at the very beginning marks the start of a line. */
- int newline = 1;
-
- in = out = buf;
- while (in < buf_end) {
- if (newline && in+3 <= buf_end &&
- *in == '<' && isdigit(in[1]) && in[2] == '>') {
- in += 3;
- newline = 0;
- } else {
- newline = (*in == '\n');
- *out++ = *in++;
- }
- }
- return out - buf;
-}
-
/* Derived from logfs_compress() */
static int nvram_compress(const void *in, void *out, size_t inlen,
size_t outlen)
* partition. If that's too much, go back and capture uncompressed text.
*/
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len)
+ enum kmsg_dump_reason reason)
{
static unsigned int oops_count = 0;
static bool panicking = false;
return;
if (big_oops_buf) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
- text_len = elide_severities(big_oops_buf, text_len);
+ kmsg_dump_get_buffer(dumper, false,
+ big_oops_buf, big_oops_buf_sz, &text_len);
rc = zip_oops(text_len);
}
if (rc != 0) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, oops_data, oops_data_sz);
+ kmsg_dump_rewind(dumper);
+ kmsg_dump_get_buffer(dumper, true,
+ oops_data, oops_data_sz, &text_len);
err_type = ERR_TYPE_KERNEL_PANIC;
*oops_len = (u16) text_len;
}
* we first hard disable then check.
*/
hard_irq_disable();
- if (get_paca()->irq_happened == 0)
+ if (!lazy_irq_pending())
cede_processor();
}
/* print cpus waiting or in xmon */
printf("cpus stopped:");
count = 0;
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evtirq(0xa20),
- .end = evtirq(0xa20),
+ .start = evt2irq(0xa20),
+ .end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
clk->enable_bit = BITS_CKE;
- ret = sh_clk_mstp32_register(clk, 1);
+ ret = sh_clk_mstp_register(clk, 1);
if (unlikely(ret < 0))
goto err_phy;
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
root_vdev = vio_create_one(hp, root, NULL);
err = -ENODEV;
if (!root_vdev) {
- printk(KERN_ERR "VIO: Coult not create root device.\n");
+ printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
int err = 0;
- bool ia32 = is_ia32_task();
+ bool ia32 = test_thread_flag(TIF_IA32);
if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
return -EFAULT;
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
return 0;
}
- if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (intsrc->source_irq == 0) {
if (acpi_skip_timer_override) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
return 0;
}
- if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
}
/*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- /*
- * The ati_ixp4x0_rev() early PCI quirk should have set
- * the acpi_skip_timer_override flag already:
- */
if (!acpi_skip_timer_override) {
- WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
d->ident);
acpi_skip_timer_override = 1;
}
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * is not connected at all. Force ignoring BIOS IRQ0
* override in that cases.
*/
{
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "FUJITSU SIEMENS",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
{}
};
-#!/usr/bin/perl
+#!/usr/bin/perl -w
#
# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
#
print OUT "#include <asm/cpufeature.h>\n\n";
print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+%features = ();
+$err = 0;
+
while (defined($line = <IN>)) {
if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
$macro = $1;
- $feature = $2;
+ $feature = "\L$2";
$tail = $3;
if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
- $feature = $1;
+ $feature = "\L$1";
}
- if ($feature ne '') {
- printf OUT "\t%-32s = \"%s\",\n",
- "[$macro]", "\L$feature";
+ next if ($feature eq '');
+
+ if ($features{$feature}++) {
+ print STDERR "$in: duplicate feature name: $feature\n";
+ $err++;
}
+ printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature;
}
}
print OUT "};\n";
close(IN);
close(OUT);
+
+if ($err) {
+ unlink($out);
+ exit(1);
+}
+
+exit(0);
const struct cpuid_bit *cb;
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
- { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 },
+ { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 },
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 },
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
/**
* kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- * @vector: The error vector of the exception that happened.
+ * @e_vector: The error vector of the exception that happened.
* @signo: The signal number of the exception that happened.
* @err_code: The error code of the exception that happened.
- * @remcom_in_buffer: The buffer of the packet we have read.
- * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- * @regs: The &struct pt_regs of the current process.
+ * @remcomInBuffer: The buffer of the packet we have read.
+ * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @linux_regs: The &struct pt_regs of the current process.
*
* This function MUST handle the 'c' and 's' command packets,
* as well packets to set / remove a hardware breakpoint, if used.
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
},
},
+ { /* Handle problems with rebooting on the Precision M6600. */
+ .callback = set_pci_reboot,
+ .ident = "Dell OptiPlex 990",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+ },
+ },
{ }
};
{
struct kvm_mmu_page *page;
+ if (list_empty(&kvm->arch.active_mmu_pages))
+ return;
+
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
* @src: source address
* @dst: destination address
* @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
+ * @sum: initial sum that is added into the result (32bit unfolded)
*
* Returns an 32bit unfolded checksum of the buffer.
*/
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- int i;
+ static char line[1024];
+ size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
- for (i = 0; i < l1; i++)
- early_mrst_console.write(&early_mrst_console, s1 + i, 1);
- for (i = 0; i < l2; i++)
- early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
# Only build variant and/or platform if it includes a Makefile
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
_text = .;
_stext = .;
- _ftext = .;
.text :
{
EXCEPTION_TABLE(16)
/* Data section */
- _fdata = .;
+ _sdata = .;
RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
#include <asm/bootparam.h>
#include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
/*
* mem_reserve(start, end, must_exist)
reservedpages++;
}
- codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
- datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
- initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+ codesize = (unsigned long) _etext - (unsigned long) _stext;
+ datasize = (unsigned long) _edata - (unsigned long) _sdata;
+ initsize = (unsigned long) __init_end - (unsigned long) __init_begin;
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
"%ldk data, %ldk init %ldk highmem)\n",
void free_initmem(void)
{
- free_reserved_mem(&__init_begin, &__init_end);
- printk("Freeing unused kernel memory: %dk freed\n",
- (&__init_end - &__init_begin) >> 10);
+ free_reserved_mem(__init_begin, __init_end);
+ printk("Freeing unused kernel memory: %zuk freed\n",
+ (__init_end - __init_begin) >> 10);
}
blkg->pd[i] = pd;
pd->blkg = blkg;
- }
-
- /* invoke per-policy init */
- for (i = 0; i < BLKCG_MAX_POLS; i++) {
- struct blkcg_policy *pol = blkcg_policy[i];
+ /* invoke per-policy init */
if (blkcg_policy_enabled(blkg->q, pol))
pol->pd_init_fn(blkg);
}
static void blkg_destroy(struct blkcg_gq *blkg)
{
- struct request_queue *q = blkg->q;
struct blkcg *blkcg = blkg->blkcg;
- lockdep_assert_held(q->queue_lock);
+ lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
/* Something wrong if we are trying to remove same group twice */
*/
void blk_drain_queue(struct request_queue *q, bool drain_all)
{
+ int i;
+
while (true) {
bool drain = false;
- int i;
spin_lock_irq(q->queue_lock);
break;
msleep(10);
}
+
+ /*
+ * With queue marked dead, any woken up waiter will fail the
+ * allocation path, so the wakeup chaining is lost and we're
+ * left with hung waiters. We need to wake up those waiters.
+ */
+ if (q->request_fn) {
+ spin_lock_irq(q->queue_lock);
+ for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++)
+ wake_up_all(&q->rq.wait[i]);
+ spin_unlock_irq(q->queue_lock);
+ }
}
/**
/* mark @q DEAD, no new request or merges will be allowed afterwards */
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-
spin_lock_irq(lock);
/*
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
queue_flag_set(QUEUE_FLAG_DEAD, q);
-
- if (q->queue_lock != &q->__queue_lock)
- q->queue_lock = &q->__queue_lock;
-
spin_unlock_irq(lock);
mutex_unlock(&q->sysfs_lock);
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
blk_sync_queue(q);
+ spin_lock_irq(lock);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
+ spin_unlock_irq(lock);
+
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
mod_timer(&q->timeout, expiry);
}
-/**
- * blk_abort_queue -- Abort all request on given queue
- * @queue: pointer to queue
- *
- */
-void blk_abort_queue(struct request_queue *q)
-{
- unsigned long flags;
- struct request *rq, *tmp;
- LIST_HEAD(list);
-
- /*
- * Not a request based block device, nothing to abort
- */
- if (!q->request_fn)
- return;
-
- spin_lock_irqsave(q->queue_lock, flags);
-
- elv_abort_queue(q);
-
- /*
- * Splice entries to local list, to avoid deadlocking if entries
- * get readded to the timeout list by error handling
- */
- list_splice_init(&q->timeout_list, &list);
-
- list_for_each_entry_safe(rq, tmp, &list, timeout_list)
- blk_abort_request(rq);
-
- /*
- * Occasionally, blk_abort_request() will return without
- * deleting the element from the list. Make sure we add those back
- * instead of leaving them on the local stack list.
- */
- list_splice(&list, &q->timeout_list);
-
- spin_unlock_irqrestore(q->queue_lock, flags);
-
-}
-EXPORT_SYMBOL_GPL(blk_abort_queue);
#include "blk.h"
#include "blk-cgroup.h"
-static struct blkcg_policy blkcg_policy_cfq __maybe_unused;
-
/*
* tunables
*/
return pd ? container_of(pd, struct cfq_group, pd) : NULL;
}
-static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
-{
- return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
-}
-
static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg)
{
return pd_to_blkg(&cfqg->pd);
#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_cfq;
+
+static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
+{
+ return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
+}
+
static inline void cfqg_get(struct cfq_group *cfqg)
{
return blkg_get(cfqg_to_blkg(cfqg));
cfq_shutdown_timer_wq(cfqd);
-#ifndef CONFIG_CFQ_GROUP_IOSCHED
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+ blkcg_deactivate_policy(q, &blkcg_policy_cfq);
+#else
kfree(cfqd->root_group);
#endif
- blkcg_deactivate_policy(q, &blkcg_policy_cfq);
kfree(cfqd);
}
#ifdef CONFIG_CFQ_GROUP_IOSCHED
if (!cfq_group_idle)
cfq_group_idle = 1;
-#else
- cfq_group_idle = 0;
-#endif
ret = blkcg_policy_register(&blkcg_policy_cfq);
if (ret)
return ret;
+#else
+ cfq_group_idle = 0;
+#endif
+ ret = -ENOMEM;
cfq_pool = KMEM_CACHE(cfq_queue, 0);
if (!cfq_pool)
goto err_pol_unreg;
err_free_pool:
kmem_cache_destroy(cfq_pool);
err_pol_unreg:
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
return ret;
}
static void __exit cfq_exit(void)
{
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
elv_unregister(&iosched_cfq);
kmem_cache_destroy(cfq_pool);
}
break;
}
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
/* In particular, rule out all resets and host-specific ioctls. */
printk_ratelimited(KERN_WARNING
"%s: sending ioctl %x to a partition!\n", current->comm, cmd);
- return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD;
+ return -ENOIOCTLCMD;
}
EXPORT_SYMBOL(scsi_verify_blk_ioctl);
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
static unsigned long power_saving_mwait_eax;
if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
return;
- mutex_lock(&isolated_cpus_lock);
+ mutex_lock(&round_robin_lock);
cpumask_clear(tmp);
for_each_cpu(cpu, pad_busy_cpus)
cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
if (cpumask_empty(tmp))
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
return;
}
for_each_cpu(cpu, tmp) {
tsk_in_cpu[tsk_index] = preferred_cpu;
cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
cpu_weight[preferred_cpu]++;
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
}
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- return acpi_os_map_generic_address(&entry->register_region);
+ return apei_map_generic_address(&entry->register_region);
return 0;
}
u8 ins = entry->instruction;
if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
- acpi_os_unmap_generic_address(&entry->register_region);
+ apei_unmap_generic_address(&entry->register_region);
return 0;
}
return 0;
}
+int apei_map_generic_address(struct acpi_generic_address *reg)
+{
+ int rc;
+ u32 access_bit_width;
+ u64 address;
+
+ rc = apei_check_gar(reg, &address, &access_bit_width);
+ if (rc)
+ return rc;
+ return acpi_os_map_generic_address(reg);
+}
+EXPORT_SYMBOL_GPL(apei_map_generic_address);
+
/* read GAR in interrupt (including NMI) or process context */
int apei_read(u64 *val, struct acpi_generic_address *reg)
{
#define APEI_INTERNAL_H
#include <linux/cper.h>
+#include <linux/acpi.h>
+#include <linux/acpi_io.h>
struct apei_exec_context;
/* IP has been set in instruction function */
#define APEI_EXEC_SET_IP 1
+int apei_map_generic_address(struct acpi_generic_address *reg);
+
+static inline void apei_unmap_generic_address(struct acpi_generic_address *reg)
+{
+ acpi_os_unmap_generic_address(reg);
+}
+
int apei_read(u64 *val, struct acpi_generic_address *reg);
int apei_write(u64 val, struct acpi_generic_address *reg);
if (!ghes)
return ERR_PTR(-ENOMEM);
ghes->generic = generic;
- rc = acpi_os_map_generic_address(&generic->error_status_address);
+ rc = apei_map_generic_address(&generic->error_status_address);
if (rc)
goto err_free;
error_block_length = generic->error_block_length;
return ghes;
err_unmap:
- acpi_os_unmap_generic_address(&generic->error_status_address);
+ apei_unmap_generic_address(&generic->error_status_address);
err_free:
kfree(ghes);
return ERR_PTR(rc);
static void ghes_fini(struct ghes *ghes)
{
kfree(ghes->estatus);
- acpi_os_unmap_generic_address(&ghes->generic->error_status_address);
+ apei_unmap_generic_address(&ghes->generic->error_status_address);
}
enum {
/*
* Suspend / resume control
*/
+static int acpi_idle_suspend;
static u32 saved_bm_rld;
static void acpi_idle_bm_rld_save(void)
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
+ if (acpi_idle_suspend == 1)
+ return 0;
+
acpi_idle_bm_rld_save();
+ acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
+ if (acpi_idle_suspend == 0)
+ return 0;
+
acpi_idle_bm_rld_restore();
+ acpi_idle_suspend = 0;
return 0;
}
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
drv, drv->safe_state_index);
} else {
local_irq_disable();
- acpi_safe_halt();
+ if (!acpi_idle_suspend)
+ acpi_safe_halt();
local_irq_enable();
- return -EINVAL;
+ return -EBUSY;
}
}
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
{
int result = 0;
- if (!strncmp(val, "enable", strlen("enable") - 1)) {
+ if (!strncmp(val, "enable", strlen("enable"))) {
result = acpi_debug_trace(trace_method_name, trace_debug_level,
trace_debug_layer, 0);
if (result)
goto exit;
}
- if (!strncmp(val, "disable", strlen("disable") - 1)) {
+ if (!strncmp(val, "disable", strlen("disable"))) {
int name = 0;
result = acpi_debug_trace((char *)&name, trace_debug_level,
trace_debug_layer, 0);
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
+ if (!video->cap._DOS)
+ return 0;
if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
return -EINVAL;
* Arasan Compact Flash host controller source file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
module_platform_driver(arasan_cf_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
mutex_lock(&deferred_probe_mutex);
if (list_empty(&dev->p->deferred_probe)) {
dev_dbg(dev, "Added to deferred list\n");
- list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
}
mutex_unlock(&deferred_probe_mutex);
}
dpm_wait_for_children(dev, async);
if (async_error)
- return 0;
+ goto Complete;
pm_runtime_get_noresume(dev);
if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
if (pm_wakeup_pending()) {
pm_runtime_put_sync(dev);
async_error = -EBUSY;
- return 0;
+ goto Complete;
}
device_lock(dev);
}
device_unlock(dev);
+
+ Complete:
complete_all(&dev->power.completion);
if (error) {
first_word = 0;
spin_lock_irq(&b->bm_lock);
}
-
/* last page (respectively only page, for first page == last page) */
last_word = MLPP(el >> LN2_BPL);
- bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+ /* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples).
+ * ==> e = 32767, el = 32768, last_page = 2,
+ * and now last_word = 0.
+ * We do not want to touch last_page in this case,
+ * as we did not allocate it, it is not present in bitmap->bm_pages.
+ */
+ if (last_word)
+ bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
/* possibly trailing bits.
* example: (e & 63) == 63, el will be e+1.
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+ if (req->rq_state & RQ_LOCAL_ABORTED) {
+ _req_may_be_done(req, m);
+ break;
+ }
__drbd_chk_io_error(mdev, false);
goto_queue_for_net_read:
+ D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+
/* no point in retrying if there is no good remote data,
* or we have no connection. */
if (mdev->state.pdsk != D_UP_TO_DATE) {
return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
}
+static void maybe_pull_ahead(struct drbd_conf *mdev)
+{
+ int congested = 0;
+
+ /* If I don't even have good local storage, we can not reasonably try
+ * to pull ahead of the peer. We also need the local reference to make
+ * sure mdev->act_log is there.
+ * Note: caller has to make sure that net_conf is there.
+ */
+ if (!get_ldev_if_state(mdev, D_UP_TO_DATE))
+ return;
+
+ if (mdev->net_conf->cong_fill &&
+ atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
+ dev_info(DEV, "Congestion-fill threshold reached\n");
+ congested = 1;
+ }
+
+ if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
+ dev_info(DEV, "Congestion-extents threshold reached\n");
+ congested = 1;
+ }
+
+ if (congested) {
+ queue_barrier(mdev); /* last barrier, after mirrored writes */
+
+ if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
+ _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
+ else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
+ _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
+ }
+ put_ldev(mdev);
+}
+
static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
{
const int rw = bio_rw(bio);
_req_mod(req, queue_for_send_oos);
if (remote &&
- mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
- int congested = 0;
-
- if (mdev->net_conf->cong_fill &&
- atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
- dev_info(DEV, "Congestion-fill threshold reached\n");
- congested = 1;
- }
-
- if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
- dev_info(DEV, "Congestion-extents threshold reached\n");
- congested = 1;
- }
-
- if (congested) {
- queue_barrier(mdev); /* last barrier, after mirrored writes */
-
- if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
- _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
- else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
- _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
- }
- }
+ mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
+ maybe_pull_ahead(mdev);
spin_unlock_irq(&mdev->req_lock);
kfree(b); /* if someone else has beaten us to it... */
if (drive == current_reqD)
drive = current_drive;
+ __cancel_delayed_work(&fd_timeout);
if (drive < 0 || drive >= N_DRIVE) {
delay = 20UL * HZ;
#include <linux/kthread.h>
#include <../drivers/ata/ahci.h>
#include <linux/export.h>
+#include <linux/debugfs.h>
#include "mtip32xx.h"
#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
* allocated in mtip_init().
*/
static int mtip_major;
+static struct dentry *dfs_parent;
static DEFINE_SPINLOCK(rssd_index_lock);
static DEFINE_IDA(rssd_index_ida);
}
/*
- * Sysfs register/status dump.
+ * Sysfs status dump.
*
* @dev Pointer to the device structure, passed by the kernrel.
* @attr Pointer to the device_attribute structure passed by the kernel.
* return value
* The size, in bytes, of the data copied into buf.
*/
-static ssize_t mtip_hw_show_registers(struct device *dev,
+static ssize_t mtip_hw_show_status(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- u32 group_allocated;
struct driver_data *dd = dev_to_disk(dev)->private_data;
int size = 0;
+
+ if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "thermal_shutdown\n");
+ else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "write_protect\n");
+ else
+ size += sprintf(buf, "%s", "online\n");
+
+ return size;
+}
+
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+
+static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
+{
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ u32 group_allocated;
+ int size = *offset;
int n;
- size += sprintf(&buf[size], "Hardware\n--------\n");
- size += sprintf(&buf[size], "S ACTive : [ 0x");
+ if (!len || size)
+ return 0;
+
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "H/ S ACTive : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->s_active[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Command Issue : [ 0x");
+ size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->cmd_issue[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Completed : [ 0x");
+ size += sprintf(&buf[size], "H/ Completed : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--)
size += sprintf(&buf[size], "%08X ",
readl(dd->port->completed[n]));
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
+ size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
+ size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
readl(dd->mmio + HOST_IRQ_STAT));
size += sprintf(&buf[size], "\n");
- size += sprintf(&buf[size], "Local\n-----\n");
- size += sprintf(&buf[size], "Allocated : [ 0x");
+ size += sprintf(&buf[size], "L/ Allocated : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--) {
if (sizeof(long) > sizeof(u32))
}
size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Commands in Q: [ 0x");
+ size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
for (n = dd->slot_groups-1; n >= 0; n--) {
if (sizeof(long) > sizeof(u32))
}
size += sprintf(&buf[size], "]\n");
- return size;
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static ssize_t mtip_hw_show_status(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ int size = *offset;
- if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
- size += sprintf(buf, "%s", "thermal_shutdown\n");
- else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
- size += sprintf(buf, "%s", "write_protect\n");
- else
- size += sprintf(buf, "%s", "online\n");
-
- return size;
-}
+ if (!len || size)
+ return 0;
-static ssize_t mtip_hw_show_flags(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ if (size < 0)
+ return -EINVAL;
- size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
+ size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
dd->port->flags);
- size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n",
+ size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n",
dd->dd_flag);
- return size;
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
-static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
+static const struct file_operations mtip_regs_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_registers,
+ .llseek = no_llseek,
+};
+
+static const struct file_operations mtip_flags_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_flags,
+ .llseek = no_llseek,
+};
/*
* Create the sysfs related attributes.
if (!kobj || !dd)
return -EINVAL;
- if (sysfs_create_file(kobj, &dev_attr_registers.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'registers' sysfs entry\n");
if (sysfs_create_file(kobj, &dev_attr_status.attr))
dev_warn(&dd->pdev->dev,
"Error creating 'status' sysfs entry\n");
- if (sysfs_create_file(kobj, &dev_attr_flags.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'flags' sysfs entry\n");
return 0;
}
if (!kobj || !dd)
return -EINVAL;
- sysfs_remove_file(kobj, &dev_attr_registers.attr);
sysfs_remove_file(kobj, &dev_attr_status.attr);
- sysfs_remove_file(kobj, &dev_attr_flags.attr);
return 0;
}
+static int mtip_hw_debugfs_init(struct driver_data *dd)
+{
+ if (!dfs_parent)
+ return -1;
+
+ dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
+ if (IS_ERR_OR_NULL(dd->dfs_node)) {
+ dev_warn(&dd->pdev->dev,
+ "Error creating node %s under debugfs\n",
+ dd->disk->disk_name);
+ dd->dfs_node = NULL;
+ return -1;
+ }
+
+ debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd,
+ &mtip_flags_fops);
+ debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd,
+ &mtip_regs_fops);
+
+ return 0;
+}
+
+static void mtip_hw_debugfs_exit(struct driver_data *dd)
+{
+ debugfs_remove_recursive(dd->dfs_node);
+}
+
+
/*
* Perform any init/resume time hardware setup
*
mtip_hw_sysfs_init(dd, kobj);
kobject_put(kobj);
}
+ mtip_hw_debugfs_init(dd);
if (dd->mtip_svc_handler) {
set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
return rv;
kthread_run_error:
+ mtip_hw_debugfs_exit(dd);
+
/* Delete our gendisk. This also removes the device from /dev */
del_gendisk(dd->disk);
kobject_put(kobj);
}
}
+ mtip_hw_debugfs_exit(dd);
/*
* Delete our gendisk structure. This also removes the device
}
mtip_major = error;
+ if (!dfs_parent) {
+ dfs_parent = debugfs_create_dir("rssd", NULL);
+ if (IS_ERR_OR_NULL(dfs_parent)) {
+ printk(KERN_WARNING "Error creating debugfs parent\n");
+ dfs_parent = NULL;
+ }
+ }
+
/* Register our PCI operations. */
error = pci_register_driver(&mtip_pci_driver);
- if (error)
+ if (error) {
+ debugfs_remove(dfs_parent);
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+ }
return error;
}
*/
static void __exit mtip_exit(void)
{
+ debugfs_remove_recursive(dfs_parent);
+
/* Release the allocated major block device number. */
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
#include <linux/ata.h>
#include <linux/interrupt.h>
#include <linux/genhd.h>
-#include <linux/version.h>
/* Offset of Subsystem Device ID in pci confoguration space */
#define PCI_SUBSYSTEM_DEVICEID 0x2E
#define dbg_printk(format, arg...)
#endif
+#define MTIP_DFS_MAX_BUF_SIZE 1024
+
#define __force_bit2int (unsigned int __force)
enum {
unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
+
+ struct dentry *dfs_node;
};
#endif
}
}
+struct mm_plug_cb {
+ struct blk_plug_cb cb;
+ struct cardinfo *card;
+};
+
+static void mm_unplug(struct blk_plug_cb *cb)
+{
+ struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb);
+
+ spin_lock_irq(&mmcb->card->lock);
+ activate(mmcb->card);
+ spin_unlock_irq(&mmcb->card->lock);
+ kfree(mmcb);
+}
+
+static int mm_check_plugged(struct cardinfo *card)
+{
+ struct blk_plug *plug = current->plug;
+ struct mm_plug_cb *mmcb;
+
+ if (!plug)
+ return 0;
+
+ list_for_each_entry(mmcb, &plug->cb_list, cb.list) {
+ if (mmcb->cb.callback == mm_unplug && mmcb->card == card)
+ return 1;
+ }
+ /* Not currently on the callback list */
+ mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC);
+ if (!mmcb)
+ return 0;
+
+ mmcb->card = card;
+ mmcb->cb.callback = mm_unplug;
+ list_add(&mmcb->cb.list, &plug->cb_list);
+ return 1;
+}
+
static void mm_make_request(struct request_queue *q, struct bio *bio)
{
struct cardinfo *card = q->queuedata;
*card->biotail = bio;
bio->bi_next = NULL;
card->biotail = &bio->bi_next;
+ if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card))
+ activate(card);
spin_unlock_irq(&card->lock);
return;
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
return free;
}
-static void add_id_to_freelist(struct blkfront_info *info,
+static int add_id_to_freelist(struct blkfront_info *info,
unsigned long id)
{
+ if (info->shadow[id].req.u.rw.id != id)
+ return -EINVAL;
+ if (info->shadow[id].request == NULL)
+ return -EINVAL;
info->shadow[id].req.u.rw.id = info->shadow_free;
info->shadow[id].request = NULL;
info->shadow_free = id;
+ return 0;
}
+static const char *op_name(int op)
+{
+ static const char *const names[] = {
+ [BLKIF_OP_READ] = "read",
+ [BLKIF_OP_WRITE] = "write",
+ [BLKIF_OP_WRITE_BARRIER] = "barrier",
+ [BLKIF_OP_FLUSH_DISKCACHE] = "flush",
+ [BLKIF_OP_DISCARD] = "discard" };
+
+ if (op < 0 || op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
{
unsigned int end = minor + nr;
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
+ /*
+ * The backend has messed up and given us an id that we would
+ * never have given to it (we stamp it up to BLK_RING_SIZE -
+ * look in get_id_from_freelist.
+ */
+ if (id >= BLK_RING_SIZE) {
+ WARN(1, "%s: response to %s has incorrect id (%ld)\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ /* We can't safely get the 'struct request' as
+ * the id is busted. */
+ continue;
+ }
req = info->shadow[id].request;
if (bret->operation != BLKIF_OP_DISCARD)
blkif_completion(&info->shadow[id]);
- add_id_to_freelist(info, id);
+ if (add_id_to_freelist(info, id)) {
+ WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ continue;
+ }
error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
switch (bret->operation) {
case BLKIF_OP_DISCARD:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: discard op failed\n",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(bret->status == BLKIF_RSP_ERROR &&
info->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(error)) {
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
void btmrvl_interrupt(struct btmrvl_private *priv);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
}
EXPORT_SYMBOL_GPL(btmrvl_interrupt);
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
struct hci_ev_cmd_complete *ec;
- u16 opcode, ocf;
+ u16 opcode, ocf, ogf;
if (hdr->evt == HCI_EV_CMD_COMPLETE) {
ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
opcode = __le16_to_cpu(ec->opcode);
ocf = hci_opcode_ocf(opcode);
+ ogf = hci_opcode_ogf(opcode);
+
if (ocf == BT_CMD_MODULE_CFG_REQ &&
priv->btmrvl_dev.sendcmdflag) {
priv->btmrvl_dev.sendcmdflag = false;
priv->adapter->cmd_complete = true;
wake_up_interruptible(&priv->adapter->cmd_wait_q);
}
+
+ if (ogf == OGF) {
+ BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf);
+ kfree_skb(skb);
+ return false;
+ }
}
+
+ return true;
}
EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
skb_put(skb, buf_len);
skb_pull(skb, SDIO_HEADER_LEN);
- if (type == HCI_EVENT_PKT)
- btmrvl_check_evtpkt(priv, skb);
+ if (type == HCI_EVENT_PKT) {
+ if (btmrvl_check_evtpkt(priv, skb))
+ hci_recv_frame(skb);
+ } else
+ hci_recv_frame(skb);
- hci_recv_frame(skb);
hdev->stat.byte_rx += buf_len;
break;
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
{
struct clk *child;
unsigned long old_rate;
+ unsigned long best_parent_rate = 0;
struct hlist_node *tmp;
old_rate = clk->rate;
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
if (clk->ops->recalc_rate)
- clk->rate = clk->ops->recalc_rate(clk->hw,
- clk->parent->rate);
+ clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
else
- clk->rate = clk->parent->rate;
+ clk->rate = best_parent_rate;
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
if (!clk->parents)
clk->parents =
- kmalloc((sizeof(struct clk*) * clk->num_parents),
+ kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
if (!clk->parents)
old_parent = clk->parent;
- /* find index of new parent clock using cached parent ptrs */
- for (i = 0; i < clk->num_parents; i++)
- if (clk->parents[i] == parent)
- break;
+ if (!clk->parents)
+ clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
/*
- * find index of new parent clock using string name comparison
- * also try to cache the parent to avoid future calls to __clk_lookup
+ * find index of new parent clock using cached parent ptrs,
+ * or if not yet cached, use string name comparison and cache
+ * them now to avoid future calls to __clk_lookup.
*/
- if (i == clk->num_parents)
- for (i = 0; i < clk->num_parents; i++)
- if (!strcmp(clk->parent_names[i], parent->name)) {
+ for (i = 0; i < clk->num_parents; i++) {
+ if (clk->parents && clk->parents[i] == parent)
+ break;
+ else if (!strcmp(clk->parent_names[i], parent->name)) {
+ if (clk->parents)
clk->parents[i] = __clk_lookup(parent->name);
- break;
- }
+ break;
+ }
+ }
if (i == clk->num_parents) {
pr_debug("%s: clock %s is not a possible parent of clock %s\n",
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80070000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx23-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80070000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx23-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp_lookups[] __initdata = {
+static struct clk_lookup ssp_lookups[] = {
{ .dev_id = "imx23-mmc.0", },
{ .dev_id = "imx23-mmc.1", },
{ .dev_id = "80010000.ssp", },
{ .dev_id = "80034000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx23-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80074000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx28-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80074000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx28-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp0_lookups[] __initdata = {
+static struct clk_lookup ssp0_lookups[] = {
{ .dev_id = "imx28-mmc.0", },
{ .dev_id = "80010000.ssp", },
};
-static struct clk_lookup ssp1_lookups[] __initdata = {
+static struct clk_lookup ssp1_lookups[] = {
{ .dev_id = "imx28-mmc.1", },
{ .dev_id = "80012000.ssp", },
};
-static struct clk_lookup ssp2_lookups[] __initdata = {
+static struct clk_lookup ssp2_lookups[] = {
{ .dev_id = "imx28-mmc.2", },
{ .dev_id = "80014000.ssp", },
};
-static struct clk_lookup ssp3_lookups[] __initdata = {
+static struct clk_lookup ssp3_lookups[] = {
{ .dev_id = "imx28-mmc.3", },
{ .dev_id = "80016000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx28-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
-static struct clk_lookup fec_lookups[] __initdata = {
+static struct clk_lookup fec_lookups[] = {
{ .dev_id = "imx28-fec.0", },
{ .dev_id = "imx28-fec.1", },
{ .dev_id = "800f0000.ethernet", },
{ .dev_id = "800f4000.ethernet", },
};
-static struct clk_lookup can0_lookups[] __initdata = {
+static struct clk_lookup can0_lookups[] = {
{ .dev_id = "flexcan.0", },
{ .dev_id = "80032000.can", },
};
-static struct clk_lookup can1_lookups[] __initdata = {
+static struct clk_lookup can1_lookups[] = {
{ .dev_id = "flexcan.1", },
{ .dev_id = "80034000.can", },
};
-static struct clk_lookup saif0_lookups[] __initdata = {
+static struct clk_lookup saif0_lookups[] = {
{ .dev_id = "mxs-saif.0", },
{ .dev_id = "80042000.saif", },
};
-static struct clk_lookup saif1_lookups[] __initdata = {
+static struct clk_lookup saif1_lookups[] = {
{ .dev_id = "mxs-saif.1", },
{ .dev_id = "80046000.saif", },
};
clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
- clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
- clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Clock framework definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr6xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
GMAC_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, NULL, "gmac");
+ clk_register_clkdev(clk, NULL, "e0800000.ethernet");
clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
I2C_CLK_ENB, 0, &_lock);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
init_completion(&sdmac->done);
- sdmac->buf_tail = 0;
-
return 0;
out:
sdmac->flags = 0;
+ sdmac->buf_tail = 0;
+
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
sg_len, channel);
sdmac->status = DMA_IN_PROGRESS;
+ sdmac->buf_tail = 0;
+
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
ret = sdma_load_context(sdmac);
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
/*
/* Number of bytes taken to setup MC for the req */
u32 mc_len;
struct pl330_req *r;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
};
/* ToBeDone for tasklet */
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(const struct pl330_info *pi)
{
- struct _pl330_req *rqdone;
+ struct pl330_req *rqdone, *tmp;
struct pl330_dmac *pl330;
unsigned long flags;
void __iomem *regs;
if (active == -1) /* Aborted */
continue;
- rqdone = &thrd->req[active];
+ /* Detach the req */
+ rqdone = thrd->req[active].r;
+ thrd->req[active].r = NULL;
+
mark_free(thrd, active);
/* Get going again ASAP */
}
/* Now that we are in no hurry, do the callbacks */
- while (!list_empty(&pl330->req_done)) {
- struct pl330_req *r;
-
- rqdone = container_of(pl330->req_done.next,
- struct _pl330_req, rqd);
-
- list_del_init(&rqdone->rqd);
-
- /* Detach the req */
- r = rqdone->r;
- rqdone->r = NULL;
+ list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+ list_del(&rqdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(r, PL330_ERR_NONE);
+ _callback(rqdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
/* Pick up ripe tomatoes */
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
if (desc->status == DONE) {
- if (pch->cyclic)
+ if (!pch->cyclic)
dma_cookie_complete(&desc->txd);
list_move_tail(&desc->node, &list);
}
}
/* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
- [7] = "Dock-card",
- [8] = "JIG",
+ [8] = "Dock-card",
+ [9] = "JIG",
NULL,
};
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
#if defined(CONFIG_ANDROID)
if (switch_class)
ret = class_compat_create_link(switch_class, edev->dev,
- dev);
+ NULL);
#endif /* CONFIG_ANDROID */
spin_lock_init(&edev->lock);
if (ret < 0)
goto err_request_irq;
+ platform_set_drvdata(pdev, extcon_data);
/* Perform initial detection */
gpio_extcon_work(&extcon_data->work.work);
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
gpio_free(extcon_data->gpio);
extcon_dev_unregister(&extcon_data->edev);
devm_kfree(&pdev->dev, extcon_data);
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
return true;
}
+static bool valid_inferred_mode(const struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ struct drm_display_mode *m;
+ bool ok = false;
+
+ list_for_each_entry(m, &connector->probed_modes, head) {
+ if (mode->hdisplay == m->hdisplay &&
+ mode->vdisplay == m->vdisplay &&
+ drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
+ return false; /* duplicated */
+ if (mode->hdisplay <= m->hdisplay &&
+ mode->vdisplay <= m->vdisplay)
+ ok = true;
+ }
+ return ok;
+}
+
static int
drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
struct drm_device *dev = connector->dev;
for (i = 0; i < drm_num_dmt_modes; i++) {
- if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
+ if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
+ valid_inferred_mode(connector, drm_dmt_modes + i)) {
newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
}
}
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ struct apertures_struct *ap;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ bool primary;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = dev_priv->dev->agp->base;
+ ap->ranges[0].size =
+ dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+ primary =
+ pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+ remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+ kfree(ap);
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
goto free_priv;
}
+ dev_priv->mm.gtt = intel_gtt_get();
+ if (!dev_priv->mm.gtt) {
+ DRM_ERROR("Failed to initialize GTT\n");
+ ret = -ENODEV;
+ goto put_bridge;
+ }
+
+ i915_kick_out_firmware_fb(dev_priv);
+
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
goto put_bridge;
}
- dev_priv->mm.gtt = intel_gtt_get();
- if (!dev_priv->mm.gtt) {
- DRM_ERROR("Failed to initialize GTT\n");
- ret = -ENODEV;
- goto out_rmmap;
- }
-
aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
*/
spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
dev_priv->pm_iir |= pm_iir;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
POSTING_READ(GEN6_PMIMR);
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
- I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+ * otherwise we get blank eDP screen after S3 on some machines
+ */
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
POSTING_READ(vga_reg);
}
-static void ivb_pch_pwm_override(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /*
- * IVB has CPU eDP backlight regs too, set things up to let the
- * PCH regs control the backlight
- */
- I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
- I915_WRITE(BLC_PWM_CPU_CTL, 0);
- I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30));
-}
-
void intel_modeset_init_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
gen6_enable_rps(dev_priv);
gen6_update_ring_freq(dev_priv);
}
-
- if (IS_IVYBRIDGE(dev))
- ivb_pch_pwm_override(dev);
}
void intel_modeset_init(struct drm_device *dev)
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &nfbdev->helper,
- nv_two_heads(dev) ? 2 : 1, 4);
+ dev->mode_config.num_crtc, 4);
if (ret) {
kfree(nfbdev);
return ret;
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
#include "drmP.h"
#include "drm.h"
}
if (tiling_flags & RADEON_TILING_MACRO) {
- if (rdev->family >= CHIP_CAYMAN)
+ if (rdev->family >= CHIP_TAHITI)
+ tmp = rdev->config.si.tile_config;
+ else if (rdev->family >= CHIP_CAYMAN)
tmp = rdev->config.cayman.tile_config;
else
tmp = rdev->config.evergreen.tile_config;
} else if (tiling_flags & RADEON_TILING_MICRO)
fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+ if ((rdev->family == CHIP_TAHITI) ||
+ (rdev->family == CHIP_PITCAIRN))
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+ else if (rdev->family == CHIP_VERDE)
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
switch (radeon_crtc->crtc_id) {
case 0:
WREG32(AVIVO_D1VGA_CONTROL, 0);
rdev->vm_manager.enabled = false;
/* mark first vm as always in use, it's the system one */
+ /* allocate enough for 2 full VM pts */
r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager,
- rdev->vm_manager.max_pfn * 8,
+ rdev->vm_manager.max_pfn * 8 * 2,
RADEON_GEM_DOMAIN_VRAM);
if (r) {
dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n",
mutex_init(&vm->mutex);
INIT_LIST_HEAD(&vm->list);
INIT_LIST_HEAD(&vm->va);
- vm->last_pfn = 0;
+ /* SI requires equal sized PTs for all VMs, so always set
+ * last_pfn to max_pfn. cayman allows variable sized
+ * pts so we can grow then as needed. Once we switch
+ * to two level pts we can unify this again.
+ */
+ if (rdev->family >= CHIP_TAHITI)
+ vm->last_pfn = rdev->vm_manager.max_pfn;
+ else
+ vm->last_pfn = 0;
/* map the ib pool buffer at 0 in virtual address space, set
* read only
*/
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_busy *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
break;
}
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_wait_idle *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
robj = gem_to_radeon_bo(gobj);
r = radeon_bo_wait(robj, NULL, false);
/* callback hw specific functions if any */
- if (robj->rdev->asic->ioctl_wait_idle)
- robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
+ if (rdev->asic->ioctl_wait_idle)
+ robj->rdev->asic->ioctl_wait_idle(rdev, robj);
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
WREG32(0x15DC, 0);
/* empty context1-15 */
- /* FIXME start with 1G, once using 2 level pt switch to full
+ /* FIXME start with 4G, once using 2 level pt switch to full
* vm size space
*/
/* set vm size, must be a multiple of 4 */
WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
- WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE);
+ WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
#define SI_DC_GPIO_HPD_EN 0x65b8
#define SI_DC_GPIO_HPD_Y 0x65bc
+#define SI_GRPH_CONTROL 0x6804
+# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0)
+# define SI_GRPH_DEPTH_8BPP 0
+# define SI_GRPH_DEPTH_16BPP 1
+# define SI_GRPH_DEPTH_32BPP 2
+# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2)
+# define SI_ADDR_SURF_2_BANK 0
+# define SI_ADDR_SURF_4_BANK 1
+# define SI_ADDR_SURF_8_BANK 2
+# define SI_ADDR_SURF_16_BANK 3
+# define SI_GRPH_Z(x) (((x) & 0x3) << 4)
+# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6)
+# define SI_ADDR_SURF_BANK_WIDTH_1 0
+# define SI_ADDR_SURF_BANK_WIDTH_2 1
+# define SI_ADDR_SURF_BANK_WIDTH_4 2
+# define SI_ADDR_SURF_BANK_WIDTH_8 3
+# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8)
+/* 8 BPP */
+# define SI_GRPH_FORMAT_INDEXED 0
+/* 16 BPP */
+# define SI_GRPH_FORMAT_ARGB1555 0
+# define SI_GRPH_FORMAT_ARGB565 1
+# define SI_GRPH_FORMAT_ARGB4444 2
+# define SI_GRPH_FORMAT_AI88 3
+# define SI_GRPH_FORMAT_MONO16 4
+# define SI_GRPH_FORMAT_BGRA5551 5
+/* 32 BPP */
+# define SI_GRPH_FORMAT_ARGB8888 0
+# define SI_GRPH_FORMAT_ARGB2101010 1
+# define SI_GRPH_FORMAT_32BPP_DIG 2
+# define SI_GRPH_FORMAT_8B_ARGB2101010 3
+# define SI_GRPH_FORMAT_BGRA1010102 4
+# define SI_GRPH_FORMAT_8B_BGRA1010102 5
+# define SI_GRPH_FORMAT_RGB111110 6
+# define SI_GRPH_FORMAT_BGR101111 7
+# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11)
+# define SI_ADDR_SURF_BANK_HEIGHT_1 0
+# define SI_ADDR_SURF_BANK_HEIGHT_2 1
+# define SI_ADDR_SURF_BANK_HEIGHT_4 2
+# define SI_ADDR_SURF_BANK_HEIGHT_8 3
+# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13)
+# define SI_ADDR_SURF_TILE_SPLIT_64B 0
+# define SI_ADDR_SURF_TILE_SPLIT_128B 1
+# define SI_ADDR_SURF_TILE_SPLIT_256B 2
+# define SI_ADDR_SURF_TILE_SPLIT_512B 3
+# define SI_ADDR_SURF_TILE_SPLIT_1KB 4
+# define SI_ADDR_SURF_TILE_SPLIT_2KB 5
+# define SI_ADDR_SURF_TILE_SPLIT_4KB 6
+# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18)
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3
+# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20)
+# define SI_GRPH_ARRAY_LINEAR_GENERAL 0
+# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1
+# define SI_GRPH_ARRAY_1D_TILED_THIN1 2
+# define SI_GRPH_ARRAY_2D_TILED_THIN1 4
+# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24)
+# define SI_ADDR_SURF_P2 0
+# define SI_ADDR_SURF_P4_8x16 4
+# define SI_ADDR_SURF_P4_16x16 5
+# define SI_ADDR_SURF_P4_16x32 6
+# define SI_ADDR_SURF_P4_32x32 7
+# define SI_ADDR_SURF_P8_16x16_8x16 8
+# define SI_ADDR_SURF_P8_16x32_8x16 9
+# define SI_ADDR_SURF_P8_32x32_8x16 10
+# define SI_ADDR_SURF_P8_16x32_16x16 11
+# define SI_ADDR_SURF_P8_32x32_16x16 12
+# define SI_ADDR_SURF_P8_32x32_16x32 13
+# define SI_ADDR_SURF_P8_32x64_32x32 14
+
#endif
u8 length;
u16 key;
- key = *((u16 *) desc);
+ key = le16_to_cpu(*((u16 *) desc));
desc += sizeof(u16);
length = *desc;
desc++;
#
# HID driver configuration
#
-menuconfig HID_SUPPORT
- bool "HID Devices"
- depends on INPUT
- default y
- ---help---
- Say Y here to get to see options for various computer-human interface
- device drivers. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+ depends on INPUT
config HID
- tristate "Generic HID support"
+ tristate "HID bus support"
depends on INPUT
default y
---help---
most commonly used to refer to the USB-HID specification, but other
devices (such as, but not strictly limited to, Bluetooth) are
designed using HID specification (this involves certain keyboards,
- mice, tablets, etc). This option compiles into kernel the generic
- HID layer code (parser, usages, etc.), which can then be used by
- transport-specific HID implementation (like USB or Bluetooth).
+ mice, tablets, etc). This option adds the HID bus to the kernel,
+ together with generic HID layer code. The HID devices are added and
+ removed from the HID bus by the transport-layer drivers, such as
+ usbhid (USB_HID) and hidp (BT_HIDP).
For docs and specs, see http://www.usb.org/developers/hidpage/
If unsure, say Y.
+if HID
+
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
If unsure, say Y.
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
- depends on HID
-
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
- default y
+ default HID
---help---
- Support for generic HID devices.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
To compile this driver as a module, choose M here: the module
will be called hid-generic.
If unsure, say Y.
+menu "Special HID drivers"
+ depends on HID
+
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
endmenu
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
#define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800
+#define USB_VENDOR_ID_AXENTIA 0x12cf
+#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111
+
#define USB_VENDOR_ID_BAANTO 0x2453
#define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
__set_bit(EV_ABS, input->evbit);
input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+ 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+ 4, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
/* Note: Touch Y position from the device is inverted relative
-comment "USB Input Devices"
+menu "USB HID support"
depends on USB
config USB_HID
- tristate "USB Human Interface Device (full HID) support"
+ tristate "USB HID transport layer"
default y
depends on USB && INPUT
select HID
---help---
- Say Y here if you want full HID support to connect USB keyboards,
+ Say Y here if you want to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB, as well as Uninterruptible Power Supply
(UPS) and monitor control devices.
endmenu
-
+endmenu
*
* Based on hdaps.c driver:
* Copyright (C) 2005 Robert Love <rml@novell.com>
- * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
+ * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net>
*
* Fan control based on smcFanControl:
* Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com>
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
* sensors. We check this bit only, all the early CPUs
* without thermal sensors will be filtered out.
*/
- if (!cpu_has(c, X86_FEATURE_DTS))
+ if (!cpu_has(c, X86_FEATURE_DTHERM))
return;
if (!pdev) {
};
static const struct x86_cpu_id coretemp_ids[] = {
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM },
{}
};
MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
data->fan_rpm_control = true;
break;
default:
- mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto err;
}
- read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ if (result) {
+ count = result;
+ goto err;
+ }
if (data->fan_rpm_control)
conf_reg |= 0x80;
conf_reg &= ~0x80;
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
mutex_unlock(&data->update_lock);
return count;
}
module_i2c_driver(jc42_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("JC42 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(pem_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
MODULE_LICENSE("GPL");
module_i2c_driver(ltc4261_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("LTC4261 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(max16065_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("MAX16065 driver");
MODULE_LICENSE("GPL");
spin_lock_init(&hwlock->lock);
hwlock->bank = bank;
- ret = hwspin_lock_register_single(hwlock, i);
+ ret = hwspin_lock_register_single(hwlock, base_id + i);
if (ret)
goto reg_failed;
}
reg_failed:
while (--i >= 0)
- hwspin_lock_unregister_single(i);
+ hwspin_lock_unregister_single(base_id + i);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_register);
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- Documentation/iio for more information.
+ number of different physical interfaces (i2c, spi, etc).
if IIO
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
{
- return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
(ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
(id->qp_type == IB_QPT_UD)) ||
u32 max_inline_data;
int max_send_sge;
int max_recv_sge;
+ int max_srq_sge;
int max_mr;
u64 max_mr_size;
u32 max_num_mr_pbl;
struct ocrdma_dev_attr *attr,
struct ocrdma_mbx_query_config *rsp)
{
- int max_q_mem;
-
attr->max_pd =
(rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
attr->max_recv_sge = (rsp->max_write_send_sge &
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+ attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
attr->max_inline_data =
attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
sizeof(struct ocrdma_sge));
- max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
- /* hw can queue one less then the configured size,
- * so publish less by one to stack.
- */
if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
attr->ird = 1;
attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
- } else
- dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
- dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+ }
+ dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+ OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+ dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
}
static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
sgid->raw[15] = mac_addr[5];
}
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
bool is_vlan, u16 vlan_id)
{
int i;
- bool found = false;
union ib_gid new_sgid;
- int free_idx = OCRDMA_MAX_SGID;
unsigned long flags;
memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
sizeof(union ib_gid))) {
/* found free entry */
- if (!found) {
- free_idx = i;
- found = true;
- break;
- }
+ memcpy(&dev->sgid_tbl[i], &new_sgid,
+ sizeof(union ib_gid));
+ spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return true;
} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
sizeof(union ib_gid))) {
/* entry already present, no addition is required. */
spin_unlock_irqrestore(&dev->sgid_lock, flags);
- return;
+ return false;
}
}
- /* if entry doesn't exist and if table has some space, add entry */
- if (found)
- memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
- sizeof(union ib_gid));
spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return false;
}
static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
ocrdma_get_guid(dev, &sgid->raw[8]);
}
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
{
struct net_device *netdev, *tmp;
u16 vlan_id;
netdev = dev->nic_info.netdev;
- ocrdma_add_default_sgid(dev);
-
rcu_read_lock();
for_each_netdev_rcu(&init_net, tmp) {
if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
}
}
rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+ ocrdma_add_default_sgid(dev);
+ ocrdma_add_vlan_sgids(dev);
return 0;
}
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
static int ocrdma_inet6addr_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
struct ib_event gid_event;
struct ocrdma_dev *dev;
bool found = false;
+ bool updated = false;
bool is_vlan = false;
u16 vid = 0;
mutex_lock(&dev->dev_lock);
switch (event) {
case NETDEV_UP:
- ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+ updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
case NETDEV_DOWN:
- found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
- if (found) {
- /* found the matching entry, notify
- * the consumers about it
- */
- gid_event.device = &dev->ibdev;
- gid_event.element.port_num = 1;
- gid_event.event = IB_EVENT_GID_CHANGE;
- ib_dispatch_event(&gid_event);
- }
+ updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
default:
break;
}
+ if (updated) {
+ /* GID table updated, notify the consumers about it */
+ gid_event.device = &dev->ibdev;
+ gid_event.element.port_num = 1;
+ gid_event.event = IB_EVENT_GID_CHANGE;
+ ib_dispatch_event(&gid_event);
+ }
mutex_unlock(&dev->dev_lock);
return NOTIFY_OK;
}
.notifier_call = ocrdma_inet6addr_event
};
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
u8 port_num)
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF <<
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF,
OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF <<
- OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF <<
dev = get_ocrdma_dev(ibdev);
memset(sgid, 0, sizeof(*sgid));
- if (index > OCRDMA_MAX_SGID)
+ if (index >= OCRDMA_MAX_SGID)
return -EINVAL;
memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_LOCAL_DMA_LKEY;
- attr->max_sge = dev->attr.max_send_sge;
- attr->max_sge_rd = dev->attr.max_send_sge;
+ attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+ attr->max_sge_rd = 0;
attr->max_cq = dev->attr.max_cq;
attr->max_cqe = dev->attr.max_cqe;
attr->max_mr = dev->attr.max_mr;
min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
attr->max_srq = (dev->attr.max_qp - 1);
- attr->max_srq_sge = attr->max_sge;
+ attr->max_srq_sge = attr->max_srq_sge;
attr->max_srq_wr = dev->attr.max_rqe;
attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
attr->max_fast_reg_page_list_len = 0;
*stop = true;
expand = false;
}
- } else
+ } else {
+ *polled = true;
expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+ }
return expand;
}
error = request_threaded_irq(as5011->button_irq,
NULL, as5011_button_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"as5011_button", as5011);
if (error < 0) {
dev_err(&client->dev,
error = request_threaded_irq(as5011->axis_irq, NULL,
as5011_axis_interrupt,
- plat_data->axis_irqflags,
+ plat_data->axis_irqflags | IRQF_ONESHOT,
"as5011_joystick", as5011);
if (error) {
dev_err(&client->dev,
}
error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
- IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
error = request_threaded_irq(client->irq, NULL,
mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->dev.driver->name, mpr121);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
msleep(QT1070_RESET_TIME);
err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
- IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+ IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (err) {
dev_err(&client->dev, "fail to request irq\n");
goto err_free_mem;
error = request_threaded_irq(chip->irqnum, NULL,
tca6416_keys_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
"tca6416-keypad", chip);
if (error) {
dev_dbg(&client->dev,
client->irq = gpio_to_irq(client->irq);
error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, keypad_data);
if (error) {
dev_dbg(&client->dev,
goto error_clk;
}
- error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_press, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad press key irq\n");
goto error_irq_press;
}
- error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_release, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad release key irq\n");
goto error_irq_release;
struct ad714x_platform_data *plat_data = dev->platform_data;
struct ad714x_chip *ad714x;
void *drv_mem;
+ unsigned long irqflags;
struct ad714x_button_drv *bt_drv;
struct ad714x_slider_drv *sd_drv;
alloc_idx++;
}
+ irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING;
+ irqflags |= IRQF_ONESHOT;
+
error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
- plat_data->irqflags ?
- plat_data->irqflags : IRQF_TRIGGER_FALLING,
- "ad714x_captouch", ad714x);
+ irqflags, "ad714x_captouch", ad714x);
if (error) {
dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
goto err_unreg_dev;
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), keys);
if (status < 0)
goto fail2;
rep_data[0] = 12;
result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
- rep_data[0], &rep_data, 2,
+ rep_data[0], rep_data, 2,
WAC_MSG_RETRIES);
if (result >= 0 && rep_data[1] > 2)
break;
case HID_USAGE_CONTACTMAX:
- wacom_retrieve_report_data(intf, features);
+ /* leave touch_max as is if predefined */
+ if (!features->touch_max)
+ wacom_retrieve_report_data(intf, features);
i++;
break;
}
AD7879_TMR(ts->pen_down_acc_interval);
err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), ts);
if (err) {
dev_err(dev, "irq %d busy?\n", ts->irq);
goto err_free_object;
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags, client->dev.driver->name, data);
+ pdata->irqflags | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_object;
input_set_drvdata(in_dev, bu21013_data);
error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
- IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ IRQF_TRIGGER_FALLING | IRQF_SHARED |
+ IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
}
err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
- IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "touch_reset_key", ts);
if (err < 0) {
dev_err(&client->dev,
"irq %d busy? error %d\n", client->irq, err);
MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
- 0, "mrstouch", tsdev);
+ IRQF_ONESHOT, "mrstouch", tsdev);
if (err) {
dev_err(tsdev->dev, "unable to allocate irq\n");
goto err_free_mem;
input_set_drvdata(input, tsdata);
error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto error_clk;
}
- error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0,
+ error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT,
dev_name(dev), ts);
if (error < 0) {
dev_err(ts->dev, "Could not allocate ts irq\n");
tsc2005_stop_scan(ts);
error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
- IRQF_TRIGGER_RISING, "tsc2005", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "tsc2005", ts);
if (error) {
dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
goto err_free_mem;
static ATOMIC_NOTIFIER_HEAD(ppr_notifier);
int amd_iommu_max_glx_val = -1;
+static struct dma_map_ops amd_iommu_dma_ops;
+
/*
* general struct to manage commands send to an IOMMU
*/
return;
de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir,
- (u32 *)&amd_iommu_unmap_flush);
+ &amd_iommu_unmap_flush);
amd_iommu_stats_add(&compl_wait);
amd_iommu_stats_add(&cnt_map_single);
list_add_tail(&dma_domain->list, &iommu_pd_list);
spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ dev_data = get_dev_data(dev);
+
+ if (!dev_data->passthrough)
+ dev->archdata.dma_ops = &amd_iommu_dma_ops;
+ else
+ dev->archdata.dma_ops = &nommu_dma_ops;
+
break;
case BUS_NOTIFY_DEL_DEVICE:
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
amd_iommu_init_api();
+ x86_platform.iommu_shutdown = disable_iommus;
+
if (iommu_pass_through)
goto out;
else
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
- x86_platform.iommu_shutdown = disable_iommus;
-
out:
return ret;
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
-extern bool amd_iommu_unmap_flush;
+extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
return 0;
as->pte_count = devm_kzalloc(smmu->dev,
- sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL);
+ sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC);
if (!as->pte_count) {
dev_err(smmu->dev,
"failed to allocate smmu_device PTE cunters\n");
return -ENOMEM;
}
- as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA);
if (!as->pdir_page) {
dev_err(smmu->dev,
"failed to allocate smmu_device page directory\n");
#include <linux/reboot.h>
#include "leds.h"
+static int panic_heartbeats;
+
struct heartbeat_trig_data {
unsigned int phase;
unsigned int period;
unsigned long brightness = LED_OFF;
unsigned long delay = 0;
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
/* acts like an actual heart beat -- ie thump-thump-pause... */
switch (heartbeat_data->phase) {
case 0:
return NOTIFY_DONE;
}
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
static struct notifier_block heartbeat_reboot_nb = {
.notifier_call = heartbeat_reboot_notifier,
};
static struct notifier_block heartbeat_panic_nb = {
- .notifier_call = heartbeat_reboot_notifier,
+ .notifier_call = heartbeat_panic_notifier,
};
static int __init heartbeat_trig_init(void)
if (r)
return r;
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
r = dm_pool_reserve_metadata_snap(pool->pmd);
if (r)
DMWARN("reserve_metadata_snap message failed.");
super_types[mddev->major_version].
validate_super(mddev, rdev);
if ((info->state & (1<<MD_DISK_SYNC)) &&
- (!test_bit(In_sync, &rdev->flags) ||
- rdev->raid_disk != info->raid_disk)) {
+ rdev->raid_disk != info->raid_disk) {
/* This was a hot-add request, but events doesn't
* match, so reject it.
*/
thread->tsk = kthread_run(md_thread, thread,
"%s_%s",
mdname(thread->mddev),
- name ?: mddev->pers->name);
+ name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
int skipped = 0;
struct md_rdev *rdev;
char *desc;
+ struct blk_plug plug;
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
}
mddev->curr_resync_completed = j;
+ blk_start_plug(&plug);
while (j < max_sectors) {
sector_t sectors;
* this also signals 'finished resyncing' to md_stop
*/
out:
+ blk_finish_plug(&plug);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
/* tell personality that we are finished */
}
{
- mddev->thread = md_register_thread(multipathd, mddev, NULL);
+ mddev->thread = md_register_thread(multipathd, mddev,
+ "multipath");
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
#include <linux/device-mapper.h>
#include <linux/export.h>
+#include <linux/vmalloc.h>
#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
ca->nr = nr_blocks;
ca->nr_free = nr_blocks;
- ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
- if (!ca->counts)
- return -ENOMEM;
+
+ if (!nr_blocks)
+ ca->counts = NULL;
+ else {
+ ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks);
+ if (!ca->counts)
+ return -ENOMEM;
+ }
return 0;
}
+static void ca_destroy(struct count_array *ca)
+{
+ vfree(ca->counts);
+}
+
static int ca_load(struct count_array *ca, struct dm_space_map *sm)
{
int r;
static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
{
dm_block_t nr_blocks = ca->nr + extra_blocks;
- uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks);
if (!counts)
return -ENOMEM;
- memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
- kfree(ca->counts);
+ if (ca->counts) {
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ ca_destroy(ca);
+ }
ca->nr = nr_blocks;
ca->nr_free += extra_blocks;
ca->counts = counts;
return 0;
}
-static void ca_destroy(struct count_array *ca)
-{
- kfree(ca->counts);
-}
-
/*----------------------------------------------------------------*/
struct sm_checker {
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_commit(&smc->old_counts, &smc->counts);
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
return &smc->sm;
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
dm_block_t nr_blocks)
{
struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
- return dm_sm_checker_create_fresh(sm);
+ struct dm_space_map *smc;
+
+ if (IS_ERR_OR_NULL(sm))
+ return sm;
+
+ smc = dm_sm_checker_create_fresh(sm);
+ if (IS_ERR(smc))
+ dm_sm_destroy(sm);
+
+ return smc;
}
EXPORT_SYMBOL_GPL(dm_sm_disk_create);
void dm_tm_destroy(struct dm_transaction_manager *tm)
{
+ if (!tm->is_clone)
+ wipe_shadow_table(tm);
+
kfree(tm);
}
EXPORT_SYMBOL_GPL(dm_tm_destroy);
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
} else {
r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
}
return 0;
int bad_sectors;
int disk = start_disk + i;
- if (disk >= conf->raid_disks)
- disk -= conf->raid_disks;
+ if (disk >= conf->raid_disks * 2)
+ disk -= conf->raid_disks * 2;
rdev = rcu_dereference(conf->mirrors[disk].rdev);
if (r1_bio->bios[disk] == IO_BLOCKED
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
- int plugged;
int first_clone;
int sectors_handled;
int max_sectors;
* the bad blocks. Each set of writes gets it's own r1bio
* with a set of bios attached.
*/
- plugged = mddev_check_plugged(mddev);
disks = conf->raid_disks * 2;
retry_write:
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
* as it could result in the bio being freed.
/* In case raid1d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
goto abort;
}
err = -ENOMEM;
- conf->thread = md_register_thread(raid1d, mddev, NULL);
+ conf->thread = md_register_thread(raid1d, mddev, "raid1");
if (!conf->thread) {
printk(KERN_ERR
"md/raid1:%s: couldn't allocate thread\n",
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
unsigned long flags;
struct md_rdev *blocked_rdev;
- int plugged;
int sectors_handled;
int max_sectors;
int sectors;
* of r10_bios is recored in bio->bi_phys_segments just as with
* the read case.
*/
- plugged = mddev_check_plugged(mddev);
r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
raid10_find_phys(conf, r10_bio);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
if (!r10_bio->devs[i].repl_bio)
continue;
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
/* In case raid10d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !mddev->bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
if (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage, WRITE)
+ s, conf->tmppage, WRITE)
== 0) {
/* Well, this device is dead */
printk(KERN_NOTICE
switch (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage,
+ s, conf->tmppage,
READ)) {
case 0:
/* Well, this device is dead */
slot = r10_bio->read_slot;
printk_ratelimited(
KERN_ERR
- "md/raid10:%s: %s: redirecting"
+ "md/raid10:%s: %s: redirecting "
"sector %llu to another mirror\n",
mdname(mddev),
bdevname(rdev->bdev, b),
blk_start_plug(&plug);
for (;;) {
- flush_pending_writes(conf);
+ if (atomic_read(&mddev->plug_cnt) == 0)
+ flush_pending_writes(conf);
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head)) {
/* want to reconstruct this device */
rb2 = r10_bio;
sect = raid10_find_virt(conf, sector_nr, i);
+ if (sect >= mddev->resync_max_sectors) {
+ /* last stripe is not complete - don't
+ * try to recover this sector.
+ */
+ continue;
+ }
/* Unless we are doing a full sync, or a replacement
* we only need to recover the block if it is set in
* the bitmap
spin_lock_init(&conf->resync_lock);
init_waitqueue_head(&conf->wait_barrier);
- conf->thread = md_register_thread(raid10d, mddev, NULL);
+ conf->thread = md_register_thread(raid10d, mddev, "raid10");
if (!conf->thread)
goto out;
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state))
+ if (test_bit(STRIPE_DELAYED, &sh->state) &&
+ !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
else {
+ clear_bit(STRIPE_DELAYED, &sh->state);
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
* a chance*/
md_check_recovery(conf->mddev);
}
+ /*
+ * Because md_wait_for_blocked_rdev
+ * will dec nr_pending, we must
+ * increment it first.
+ */
+ atomic_inc(&rdev->nr_pending);
md_wait_for_blocked_rdev(rdev, conf->mddev);
} else {
/* Acknowledged bad block - skip the write */
} else {
const char *bdn = bdevname(rdev->bdev, b);
int retry = 0;
+ int set_bad = 0;
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (conf->mddev->degraded >= conf->max_degraded)
+ else if (conf->mddev->degraded >= conf->max_degraded) {
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error not correctable "
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
+ } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
/* Oh, no!!! */
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error NOT corrected!! "
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (atomic_read(&rdev->read_errors)
+ } else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
"md/raid:%s: Too many read errors, failing device %s.\n",
else {
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
- md_error(conf->mddev, rdev);
+ if (!(set_bad
+ && test_bit(In_sync, &rdev->flags)
+ && rdev_set_badblocks(
+ rdev, sh->sector, STRIPE_SECTORS, 0)))
+ md_error(conf->mddev, rdev);
}
}
rdev_dec_pending(rdev, conf->mddev);
finish:
/* wait for this device to become unblocked */
- if (conf->mddev->external && unlikely(s.blocked_rdev))
- md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev)) {
+ if (conf->mddev->external)
+ md_wait_for_blocked_rdev(s.blocked_rdev,
+ conf->mddev);
+ else
+ /* Internal metadata will immediately
+ * be written by raid5d, so we don't
+ * need to wait here.
+ */
+ rdev_dec_pending(s.blocked_rdev,
+ conf->mddev);
+ }
if (s.handle_bad_blocks)
for (i = disks; i--; ) {
raid_bio->bi_next = (void*)rdev;
align_bi->bi_bdev = rdev->bdev;
align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
- /* No reshape active, so we can trust rdev->data_offset */
- align_bi->bi_sector += rdev->data_offset;
if (!bio_fits_rdev(align_bi) ||
is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9,
return 0;
}
+ /* No reshape active, so we can trust rdev->data_offset */
+ align_bi->bi_sector += rdev->data_offset;
+
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
- int plugged;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
- plugged = mddev_check_plugged(mddev);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int previous;
if ((bi->bi_rw & REQ_SYNC) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
+ mddev_check_plugged(mddev);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
finish_wait(&conf->wait_for_overlap, &w);
break;
}
-
}
- if (!plugged)
- md_wakeup_thread(mddev->thread);
spin_lock_irq(&conf->device_lock);
remaining = raid5_dec_bi_phys_segments(bi);
int raid_disk, memory, max_disks;
struct md_rdev *rdev;
struct disk_info *disk;
+ char pers_name[6];
if (mddev->new_level != 5
&& mddev->new_level != 4
printk(KERN_INFO "md/raid:%s: allocated %dkB\n",
mdname(mddev), memory);
- conf->thread = md_register_thread(raid5d, mddev, NULL);
+ sprintf(pers_name, "raid%d", mddev->new_level);
+ conf->thread = md_register_thread(raid5d, mddev, pers_name);
if (!conf->thread) {
printk(KERN_ERR
"md/raid:%s: couldn't allocate thread.\n",
if (rdev->saved_raid_disk >= 0 &&
rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
- disk = rdev->saved_raid_disk;
- else
- disk = first;
- for ( ; disk <= last ; disk++) {
+ first = rdev->saved_raid_disk;
+
+ for (disk = first; disk <= last; disk++) {
p = conf->disks + disk;
if (p->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
- break;
+ goto out;
}
+ }
+ for (disk = first; disk <= last; disk++) {
+ p = conf->disks + disk;
if (test_bit(WantReplacement, &p->rdev->flags) &&
p->replacement == NULL) {
clear_bit(In_sync, &rdev->flags);
break;
}
}
+out:
print_raid5_conf(conf);
return err;
}
struct saa7146_dev *dev = video_drvdata(file);
struct saa7146_fh *fh = NULL;
int result = 0;
- enum v4l2_buf_type type;
DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
DEB_D("using: %p\n", dev);
- type = vdev->vfl_type == VFL_TYPE_GRABBER
- ? V4L2_BUF_TYPE_VIDEO_CAPTURE
- : V4L2_BUF_TYPE_VBI_CAPTURE;
-
/* check if an extension is registered */
if( NULL == dev->ext ) {
DEB_S("no extension registered for this device\n");
if(cx24110_readreg(state,0x10)&0x40) {
/* the RS error counter has finished one counting window */
cx24110_writereg(state,0x10,0x60); /* select the byer reg */
- cx24110_readreg(state, 0x12) |
+ (void)(cx24110_readreg(state, 0x12) |
(cx24110_readreg(state, 0x13) << 8) |
- (cx24110_readreg(state, 0x14) << 16);
+ (cx24110_readreg(state, 0x14) << 16));
cx24110_writereg(state,0x10,0x70); /* select the bler reg */
state->lastbler=cx24110_readreg(state,0x12)|
(cx24110_readreg(state,0x13)<<8)|
if (ret)
goto error;
- switch ((buf[0] >> 0) & 0x03) {
+ switch ((buf[0] >> 0) & 0x07) {
case 0:
c->modulation = QAM_16;
break;
lg_reg("writing %d registers...\n", len);
- for (i = 0; i < len - 1; i++) {
+ for (i = 0; i < len; i++) {
ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
if (lg_fail(ret))
return ret;
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xf5a0),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
goto err_out_free_region;
dev->io = pci_resource_start(pdev, 0);
- if (snd_tea575x_init(&dev->tea)) {
+ if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
goto err_out_free_region;
}
snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
- if (snd_tea575x_init(&fmr2->tea)) {
+ if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
release_region(fmr2->io, 2);
return -ENODEV;
{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+ /* Axentia ALERT FM USB Receiver */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
/* Terminating entry */
{ }
};
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
- .needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_ABSENT,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomute = 0x1800,
.audio_mode_gpio= fv2000s_audio,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
* btwincap uses 0x80000/0x80003
*/
.gpiomute = 4,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 0, 1, 1),
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.svhs = 2,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS, /* card has no svhs */
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
- .needs_tvaudio = 0,
.gpiomask = 0x68,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
- .needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
- .needs_tvaudio = 1,
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
tun_setup.mode_mask |= T_RADIO;
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
+
+ /* The 61334 needs the msp3410 to do the radio demod to get sound */
+ if (tv.model == 61334)
+ btv->radio_uses_msp_demodulator = 1;
}
static int terratec_active_radio_upgrade(struct bttv *btv)
For now this is sufficient. */
switch (input) {
case TVAUDIO_INPUT_RADIO:
+ /* Some boards need the msp do to the radio demod */
+ if (btv->radio_uses_msp_demodulator) {
+ in = MSP_INPUT_DEFAULT;
+ break;
+ }
in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
break;
/* i2c audio flags */
unsigned int no_msp34xx:1;
unsigned int no_tda7432:1;
- unsigned int needs_tvaudio:1;
unsigned int msp34xx_alt:1;
/* Note: currently no card definition needs to mark the presence
of a RDS saa6588 chip. If this is ever needed, then add a new
/* radio data/state */
int has_radio;
int radio_user;
+ int radio_uses_msp_demodulator;
/* miro/pinnacle + Aimslab VHX
philips matchbox (tea5757 radio tuner) support */
}
o = i * pixels_per_line + pixels_read + k;
if (o < len) {
+ u8 ch = invert - buffer[k];
got++;
- put_user((invert - buffer[k]) << shift, buf + o);
+ put_user(ch << shift, buf + o);
}
}
pixels_read += bytes;
struct qcam *qcam = video_drvdata(file);
strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
- strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
- strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
pix->height = qcam->height / qcam->transfer_scale;
pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
pix->field = V4L2_FIELD_NONE;
- pix->bytesperline = qcam->width;
- pix->sizeimage = qcam->width * qcam->height;
+ pix->bytesperline = pix->width;
+ pix->sizeimage = pix->width * pix->height;
/* Just a guess */
pix->colorspace = V4L2_COLORSPACE_SRGB;
return 0;
"4-Bit Monochrome", V4L2_PIX_FMT_Y4,
{ 0, 0, 0, 0 }
},
- { 0, 0, 0,
+ { 1, 0, 0,
"6-Bit Monochrome", V4L2_PIX_FMT_Y6,
{ 0, 0, 0, 0 }
},
return 0;
}
+static int qcam_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ static const struct v4l2_frmsize_discrete sizes[] = {
+ { 80, 60 },
+ { 160, 120 },
+ { 320, 240 },
+ };
+
+ if (fsize->index > 2)
+ return -EINVAL;
+ if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
+ fsize->pixel_format != V4L2_PIX_FMT_Y6)
+ return -EINVAL;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete = sizes[fsize->index];
+ return 0;
+}
+
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return len;
}
+static unsigned int qcam_poll(struct file *filp, poll_table *wait)
+{
+ return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
+}
+
static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct qcam *qcam =
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
- .poll = v4l2_ctrl_poll,
+ .poll = qcam_poll,
.unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
.vidioc_s_input = qcam_s_input,
.vidioc_enum_input = qcam_enum_input,
.vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_enum_framesizes = qcam_enum_framesizes,
.vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
return NULL;
v4l2_dev = &qcam->v4l2_dev;
- strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
- if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
kfree(qcam);
return NULL;
return NULL;
}
qcam->pport = port;
- qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+ qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
NULL, 0, NULL);
if (qcam->pdev == NULL) {
v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
return -ENODEV;
}
qc_calibrate(qcam);
+ v4l2_ctrl_handler_setup(&qcam->hdl);
parport_release(qcam->pdev);
}
CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
- cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr);
+ cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
return 0;
}
if (retval)
goto err;
- CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
+ CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
goto free_workqueues;
/* map io memory */
- CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+ CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
unique ID. Starts at 1, so 0 can be used as
uninitialized value in the stream->id. */
- u32 base_addr;
+ resource_size_t base_addr;
u8 card_rev;
void __iomem *enc_mem, *reg_mem;
apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
while (offset + sizeof(seghdr) < fw->size) {
- /* TODO: byteswapping */
- memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+ const u32 *shptr = src + offset / 4;
+
+ seghdr.sync1 = le32_to_cpu(shptr[0]);
+ seghdr.sync2 = le32_to_cpu(shptr[1]);
+ seghdr.addr = le32_to_cpu(shptr[2]);
+ seghdr.size = le32_to_cpu(shptr[3]);
+
offset += sizeof(seghdr);
if (seghdr.sync1 != APU_ROM_SYNC1 ||
seghdr.sync2 != APU_ROM_SYNC2) {
{
u32 handle, mdl_ack_offset, mdl_ack_count;
struct cx18_mailbox *mb;
+ int i;
mb = &order->mb;
handle = mb->args[0];
return -1;
}
- cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
- sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+ for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+ ((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+ cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
mb_ack_irq(cx, order);
struct cx18_mailbox *order_mb;
struct cx18_in_work_order *order;
int submit;
+ int i;
switch (rpu) {
case CPU:
order_mb = &order->mb;
/* mb->cmd and mb->args[0] through mb->args[2] */
- cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+ for (i = 0; i < 4; i++)
+ (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
/* mb->request and mb->ack. N.B. we want to read mb->ack last */
- cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
- 2 * sizeof(u32));
+ for (i = 0; i < 2; i++)
+ (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
if (order_mb->request == order_mb->ack) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
dprintk(1,"Loading firmware ...\n");
dataptr = (u32*)firmware->data;
for (i = 0; i < (firmware->size >> 2); i++) {
- value = *dataptr;
+ value = le32_to_cpu(*dataptr);
checksum += ~value;
memory_write(dev->core, i, value);
dataptr++;
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
if (dev->board.ir_codes == NULL) {
/* No remote control support */
+ em28xx_warn("Remote control support is not available for "
+ "this card.\n");
return 0;
}
enum v4l2_buf_type buf_type)
{
struct gspca_dev *gspca_dev = video_drvdata(file);
- int ret;
+ int i, ret;
if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
wake_up_interruptible(&gspca_dev->wq);
/* empty the transfer queues */
+ for (i = 0; i < gspca_dev->nframes; i++)
+ gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
atomic_set(&gspca_dev->fr_q, 0);
atomic_set(&gspca_dev->fr_i, 0);
gspca_dev->fr_o = 0;
static void setcontrast(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val);
+static void setagc(struct gspca_dev *gspca_dev);
static void setawb(struct gspca_dev *gspca_dev);
static void setaec(struct gspca_dev *gspca_dev);
static void setsharpness(struct gspca_dev *gspca_dev);
.step = 1,
.default_value = 1,
},
- .set = sd_setagc
+ .set_control = setagc
},
[AWB] = {
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
switch (data) {
cam->ctrls = sd->ctrls;
- /* the auto white balance control works only when auto gain is set */
- if (sd_ctrls[AGC].qctrl.default_value == 0)
- gspca_dev->ctrl_inac |= (1 << AWB);
-
cam->cam_mode = ov772x_mode;
cam->nmodes = ARRAY_SIZE(ov772x_mode);
} while (remaining_len > 0);
}
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->ctrls[AGC].val = val;
-
- /* the auto white balance control works only
- * when auto gain is set */
- if (val) {
- gspca_dev->ctrl_inac &= ~(1 << AWB);
- } else {
- gspca_dev->ctrl_inac |= (1 << AWB);
- if (sd->ctrls[AWB].val) {
- sd->ctrls[AWB].val = 0;
- if (gspca_dev->streaming)
- setawb(gspca_dev);
- }
- }
- if (gspca_dev->streaming)
- setagc(gspca_dev);
- return gspca_dev->usb_err;
-}
-
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = reg_r(gspca_dev, OV534_REG_STATUS);
switch (data) {
struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
gspca_dev->vdev.ctrl_handler = hdl;
- v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_handler_init(hdl, 5);
sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_CONTRAST, 0, 15, 1, 7);
V4L2_CID_SATURATION, 0, 255, 1, 127);
sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_HUE, -180, 180, 1, 0);
- v4l2_ctrl_cluster(4, &sd->brightness);
sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, 255, 1, 0x10);
V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28);
sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28);
- v4l2_ctrl_cluster(2, &sd->blue);
if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 &&
sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 &&
V4L2_CID_HFLIP, 0, 1, 1, 0);
sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_cluster(2, &sd->hflip);
}
if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB &&
V4L2_CID_GAIN, 0, 28, 1, 0);
sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ }
+
+ sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+ V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
+ if (hdl->error) {
+ pr_err("Could not initialize controls\n");
+ return hdl->error;
+ }
+
+ v4l2_ctrl_cluster(4, &sd->brightness);
+ v4l2_ctrl_cluster(2, &sd->blue);
+ if (sd->hflip)
+ v4l2_ctrl_cluster(2, &sd->hflip);
+ if (sd->autogain) {
if (sd->sensor == SENSOR_SOI968)
/* this sensor doesn't have the exposure control and
autogain is clustered with gain instead. This works
/* Otherwise autogain is clustered with exposure. */
v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
}
-
- sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
- V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
- if (hdl->error) {
- pr_err("Could not initialize controls\n");
- return hdl->error;
- }
return 0;
}
set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma));
set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue),
v4l2_ctrl_g_ctrl(sd->red));
- set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
- set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
- set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
- v4l2_ctrl_g_ctrl(sd->vflip));
+ if (sd->gain)
+ set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
+ if (sd->exposure)
+ set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
+ if (sd->hflip)
+ set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
+ v4l2_ctrl_g_ctrl(sd->vflip));
reg_w1(gspca_dev, 0x1007, 0x20);
reg_w1(gspca_dev, 0x1061, 0x03);
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- if (!v4l2_ctrl_g_ctrl(sd->autogain))
+ if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain))
return;
avg_lum = atomic_read(&sd->avg_lum);
| (SENSOR_ ## sensor << 8) \
| (flags)
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+ {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)},
{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)},
pci_write_config_dword(pdev, 0x40, 0xffff);
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
pdev->device, pdev->revision, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pdev->irq, pci_latency, (unsigned long)itv->base_addr);
+ pdev->irq, pci_latency, (u64)itv->base_addr);
return 0;
}
itv->cxhdl.priv = itv;
itv->cxhdl.func = ivtv_api_func;
- IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+ IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr);
/* PCI Device Setup */
retval = ivtv_setup_pci(itv, pdev, pci_id);
goto free_mem;
/* map io memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
IVTV_ENCODER_SIZE);
if (!itv->enc_mem) {
}
if (itv->has_cx23415) {
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
IVTV_DECODER_SIZE);
if (!itv->dec_mem) {
}
/* map registers memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
itv->reg_mem =
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (!itv->reg_mem) {
struct v4l2_subdev *sd_video; /* controlling video decoder subdev */
struct v4l2_subdev *sd_audio; /* controlling audio subdev */
struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */
- u32 base_addr; /* PCI resource base address */
+ resource_size_t base_addr; /* PCI resource base address */
volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
volatile void __iomem *reg_mem; /* pointer to mapped registers */
V4L2_M2M_DST = 1,
};
-/* Source and destination queue data */
-static struct m2mtest_q_data q_data[2];
-
-static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type)
-{
- switch (type) {
- case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- return &q_data[V4L2_M2M_SRC];
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- return &q_data[V4L2_M2M_DST];
- default:
- BUG();
- }
- return NULL;
-}
-
#define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE
#define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1)
int aborting;
struct v4l2_m2m_ctx *m2m_ctx;
+
+ /* Source and destination queue data */
+ struct m2mtest_q_data q_data[2];
};
+static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ switch (type) {
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ return &ctx->q_data[V4L2_M2M_SRC];
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ return &ctx->q_data[V4L2_M2M_DST];
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+
static struct v4l2_queryctrl *get_ctrl(int id)
{
int i;
int tile_w, bytes_left;
int width, height, bytesperline;
- q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
width = q_data->width;
height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
f->fmt.pix.width = q_data->width;
f->fmt.pix.height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
if (!q_data)
return -EINVAL;
struct m2mtest_q_data *q_data;
unsigned int size, count = *nbuffers;
- q_data = get_q_data(vq->type);
+ q_data = get_q_data(ctx, vq->type);
size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
- q_data = get_q_data(vb->vb2_queue->type);
+ q_data = get_q_data(ctx, vb->vb2_queue->type);
if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n",
ctx->transtime = MEM2MEM_DEF_TRANSTIME;
ctx->num_processed = 0;
+ ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+ ctx->q_data[V4L2_M2M_DST].fmt = &formats[0];
+
ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
if (IS_ERR(ctx->m2m_ctx)) {
goto err_m2m;
}
- q_data[V4L2_M2M_SRC].fmt = &formats[0];
- q_data[V4L2_M2M_DST].fmt = &formats[0];
-
return 0;
v4l2_m2m_release(dev->m2m_dev);
PRP_INTR_CH2OVF,
}
},
- {
- .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUV420,
- .cfg = {
- .channel = 2,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
- PRP_INTR_CH2FC | PRP_INTR_LBOVF |
- PRP_INTR_CH2OVF,
- }
- },
};
static struct mx2_fmt_cfg *mx27_emma_prp_get_format(
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- const struct soc_camera_format_xlate *xlate;
unsigned long common_flags;
int ret;
int bytesperline;
return ret;
}
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
- csicr1 |= CSICR1_PACK_DIR;
- csicr1 &= ~CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "already yuyv format, don't convert\n");
- } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
- csicr1 &= ~CSICR1_PACK_DIR;
- csicr1 |= CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
- } else {
- dev_warn(icd->parent, "mbus format not supported\n");
- return -EINVAL;
- }
-
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
+ if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+ csicr1 |= CSICR1_SWAP16_EN;
if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
csicr1 |= CSICR1_EXT_VSYNC;
if (pcdev->platform_flags & MX2_CAMERA_CCIR)
csicr1 |= CSICR1_GCLK_MODE;
if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
csicr1 |= CSICR1_INV_DATA;
+ if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+ csicr1 |= CSICR1_PACK_DIR;
pcdev->csicr1 = csicr1;
return 0;
}
- if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
- code == V4L2_MBUS_FMT_UYVY8_2X8) {
+ if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
formats++;
if (xlate) {
/*
}
}
- if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
- xlate->code = code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code);
- xlate++;
- }
- }
-
/* Generic pass-trough */
formats++;
if (xlate) {
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/isa.h>
#include <asm/io.h>
ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS;
if (!handler->error) {
- v4l2_ctrl_cluster(3, &ctrls->colorfx);
+ v4l2_ctrl_cluster(2, &ctrls->colorfx);
ctrls->ready = true;
}
decoded pic */
#define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */
#define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */
+
#define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to
decode a frame */
#define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */
+#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */
+#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */
+#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */
+
#define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */
#define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */
#define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */
switch (ctrl->id) {
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
- ctx->loop_filter_mpeg4 = ctrl->val;
+ ctx->display_delay = ctrl->val;
break;
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
ctx->display_delay_enable = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
- ctx->display_delay = ctrl->val;
+ ctx->loop_filter_mpeg4 = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
ctx->slice_interface = ctrl->val;
.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
- .menu_skip_mask = ~(
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
- ),
},
{
.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.menu_skip_mask = 0,
},
{
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.menu_skip_mask = 0,
},
{
mfc_err("failed to try output format\n");
return -EINVAL;
}
+ v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
+ &pix_fmt_mp->height, 4, 1080, 1, 0);
} else {
mfc_err("invalid buf type\n");
return -EINVAL;
S5P_FIMV_SI_DISPLAY_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \
- S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+ S5P_FIMV_SI_DECODE_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dspl_status() readl(dev->regs_base + \
S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_dec_status() readl(dev->regs_base + \
+ S5P_FIMV_SI_DECODE_STATUS)
#define s5p_mfc_get_frame_type() (readl(dev->regs_base + \
S5P_FIMV_DECODE_FRAME_TYPE) \
& S5P_FIMV_DECODE_FRAME_MASK)
#ifndef S5P_MFC_SHM_H_
#define S5P_MFC_SHM_H_
-enum MFC_SHM_OFS
-{
+enum MFC_SHM_OFS {
EXTENEDED_DECODE_STATUS = 0x00, /* D */
SET_FRAME_TAG = 0x04, /* D */
GET_FRAME_TAG_TOP = 0x08, /* D */
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
select VIDEO_SMIAPP_PLL
---help---
This is a generic driver for SMIA++/SMIA camera modules.
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-device.h>
return 0;
if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (t->mode != V4L2_TUNER_RADIO) {
+ if (vt->type != V4L2_TUNER_RADIO) {
vt->capability |= V4L2_TUNER_CAP_NORM;
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd);
- if (ops->vidioc_g_parm || vdev->current_norm)
+ if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER)
set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls);
SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm);
SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner);
SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset);
SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
/* yes, really vidioc_subscribe_event */
SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
break;
ret = 0;
+ p->parm.capture.readbuffers = 2;
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, &std);
if (ret == 0)
} else if (vino_drvdata->decoder
&& (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) {
int input;
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
input = VINO_INPUT_COMPOSITE;
}
if (vino_drvdata->decoder_owner == vcs->channel) {
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
ret = decoder_call(video, s_routing,
vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct vivi_dev *dev = video_drvdata(file);
+ int err;
dprintk(dev, 1, "read called\n");
- return vb2_read(&dev->vb_vidq, data, count, ppos,
+ mutex_lock(&dev->mutex);
+ err = vb2_read(&dev->vb_vidq, data, count, ppos,
file->f_flags & O_NONBLOCK);
+ mutex_unlock(&dev->mutex);
+ return err;
}
static unsigned int
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
struct mei_cl *cl,
struct mei_io_list *cmpl_list)
{
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+ if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
list_del(&cb_pos->cb_list);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
- goto unmap_memory;
+ goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
if (mei_hw_init(dev)) {
mei_disable_interrupts(dev);
flush_scheduled_work();
free_irq(pdev->irq, dev);
+disable_msi:
pci_disable_msi(pdev);
-unmap_memory:
pci_iounmap(pdev, dev->mem_addr);
free_device:
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
+
+ misc_deregister(&mei_misc_device);
}
#ifdef CONFIG_PM
static int mei_pci_suspend(struct device *device)
*/
static void __exit mei_exit_module(void)
{
- misc_deregister(&mei_misc_device);
pci_unregister_driver(&mei_driver);
pr_debug("unloaded successfully.\n");
};
static const struct watchdog_info wd_info = {
.identity = INTEL_AMT_WATCHDOG_ID,
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
};
static struct watchdog_device amt_wd_dev = {
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- unsigned int timeout_us;
struct scatterlist sg;
cmd.arg = 0;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- data.timeout_ns = card->csd.tacc_ns * 100;
- data.timeout_clks = card->csd.tacc_clks * 100;
-
- timeout_us = data.timeout_ns / 1000;
- timeout_us += data.timeout_clks * 1000 /
- (card->host->ios.clock / 1000);
-
- if (timeout_us > 100000) {
- data.timeout_ns = 100000000;
- data.timeout_clks = 0;
- }
-
data.blksz = 4;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
mrq.cmd = &cmd;
mrq.data = &data;
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
-#define ACEN_ACMD12 (1 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
-#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
int reqs_blocked;
int use_reg;
int req_in_progress;
- unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
- if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
- cmdreg |= ACEN_ACMD12;
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
else
data->bytes_xfered = 0;
- if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
- omap_hsmmc_start_command(host, data->stop, NULL);
- } else {
- if (data->stop)
- data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
- RSP76);
+ if (!data->stop) {
omap_hsmmc_request_done(host, data->mrq);
+ return;
}
+ omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
host->mapbase = res->start + pdata->reg_offset;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
- host->flags = AUTO_CMD12;
host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
}
static void mtdoops_do_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
struct mtdoops_context *cxt = container_of(dumper,
struct mtdoops_context, dump);
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- char *dst;
-
- if (reason != KMSG_DUMP_OOPS &&
- reason != KMSG_DUMP_PANIC)
- return;
/* Only dump oopses if dump_oops is set */
if (reason == KMSG_DUMP_OOPS && !dump_oops)
return;
- dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
- l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
- l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+ kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+ record_size - MTDOOPS_HEADER_SIZE, NULL);
/* Panics must be written immediately */
if (reason != KMSG_DUMP_OOPS)
return;
}
+ cxt->dump.max_reason = KMSG_DUMP_OOPS;
cxt->dump.dump = mtdoops_do_dump;
err = kmsg_dump_register(&cxt->dump);
if (err) {
static int cafe_device_ready(struct mtd_info *mtd)
{
struct cafe_priv *cafe = mtd->priv;
- int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
cafe_writel(cafe, irqs, NAND_IRQ);
/* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
mtd->ecc_strength = chip->ecc.strength;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = mtd->ecc_strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
*/
int ubi_debugfs_init(void)
{
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
dfs_rootdir = debugfs_create_dir("ubi", NULL);
*/
void ubi_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove(dfs_rootdir);
}
struct dentry *dent;
struct ubi_debug_info *d = ubi->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(ubi->dbg->dfs_dir);
}
}
}
+static const char *bond_slave_link_status(s8 link)
+{
+ static const char * const status[] = {
+ [BOND_LINK_UP] = "up",
+ [BOND_LINK_FAIL] = "going down",
+ [BOND_LINK_DOWN] = "down",
+ [BOND_LINK_BACK] = "going back",
+ };
+
+ return status[link];
+}
+
static void bond_info_show_slave(struct seq_file *seq,
const struct slave *slave)
{
struct bonding *bond = seq->private;
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
- seq_printf(seq, "MII Status: %s\n",
- (slave->link == BOND_LINK_UP) ? "up" : "down");
+ seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
if (slave->speed == SPEED_UNKNOWN)
seq_printf(seq, "Speed: %s\n", "Unknown");
else
*/
memcpy(rx_buf, (u8 *)piggy_desc,
CFHSI_DESC_SHORT_SZ);
- /* Mark no embedded frame here */
- piggy_desc->offset = 0;
if (desc_pld_len == -EPROTO)
goto out_of_sync;
}
/* Extract any payload in piggyback descriptor. */
if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
goto out_of_sync;
+ /* Mark no embedded frame after extracting it */
+ piggy_desc->offset = 0;
}
}
dev_err(&ndev->dev, "%s: Registration error: %d.\n",
__func__, res);
free_netdev(ndev);
+ return -ENODEV;
}
/* Add CAIF HSI device to list. */
spin_lock(&cfhsi_list_lock);
priv->write_reg(priv, &priv->regs->control,
CONTROL_ENABLE_AR);
- if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
- CAN_CTRLMODE_LOOPBACK)) {
+ if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+ (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
/* loopback + silent mode : useful for hot self-test */
priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
return PTR_ERR(pinctrl);
if (pdev->dev.of_node) {
- const u32 *clock_freq_p;
+ const __be32 *clock_freq_p;
clock_freq_p = of_get_property(pdev->dev.of_node,
"clock-frequency", NULL);
if (clock_freq_p)
- clock_freq = *clock_freq_p;
+ clock_freq = be32_to_cpup(clock_freq_p);
}
if (!clock_freq) {
if ((netif_tx_queue_stopped(txq)) &&
(bp->state == BNX2X_STATE_OPEN) &&
- (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+ (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
netif_tx_wake_queue(txq);
__netif_tx_unlock(txq);
/* we split the first BD into headers and data BDs
* to ease the pain of our fellow microcode engineers
* we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
*/
static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
struct bnx2x_fp_txdata *txdata,
txdata->tx_bd_prod += nbd;
- if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+ if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
netif_tx_stop_queue(txq);
/* paired memory barrier is in bnx2x_tx_int(), we have to keep
smp_mb();
fp->eth_q_stats.driver_xoff++;
- if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+ if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
netif_tx_wake_queue(txq);
}
txdata->tx_pkt++;
#define I2C_BSC0 0
#define I2C_BSC1 1
#define I2C_WA_RETRY_CNT 3
+#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1)
#define MCPR_IMC_COMMAND_READ_OP 1
#define MCPR_IMC_COMMAND_WRITE_OP 2
return -EINVAL;
}
+static void bnx2x_warpcore_power_module(struct link_params *params,
+ struct bnx2x_phy *phy,
+ u8 power)
+{
+ u32 pin_cfg;
+ struct bnx2x *bp = params->bp;
+
+ pin_cfg = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+ PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+ PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+
+ if (pin_cfg == PIN_CFG_NA)
+ return;
+ DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
+ power, pin_cfg);
+ /* Low ==> corresponding SFP+ module is powered
+ * high ==> the SFP+ module is powered down
+ */
+ bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
+}
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
+ if (cnt == I2C_WA_PWR_ITER) {
+ bnx2x_warpcore_power_module(params, phy, 0);
+ /* Note that 100us are not enough here */
+ usleep_range(1000,1000);
+ bnx2x_warpcore_power_module(params, phy, 1);
+ }
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
data_array);
} while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT));
bnx2x_set_e1e2_module_fault_led(params, gpio_mode);
}
-static void bnx2x_warpcore_power_module(struct link_params *params,
- struct bnx2x_phy *phy,
- u8 power)
-{
- u32 pin_cfg;
- struct bnx2x *bp = params->bp;
-
- pin_cfg = (REG_RD(bp, params->shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
- PORT_HW_CFG_E3_PWR_DIS_MASK) >>
- PORT_HW_CFG_E3_PWR_DIS_SHIFT;
-
- if (pin_cfg == PIN_CFG_NA)
- return;
- DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
- power, pin_cfg);
- /* Low ==> corresponding SFP+ module is powered
- * high ==> the SFP+ module is powered down
- */
- bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
-}
-
static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
msleep(1);
- if (!(CHIP_IS_E1(bp)))
+ if (!(CHIP_IS_E1x(bp)))
port = BP_PATH(bp);
else
port = params->port;
goto done;
if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
- dev_warn(&adapter->pdev->dev, "This domain(VM) is not "
- "permitted to execute this cmd (opcode %d)\n",
- opcode);
+ dev_warn(&adapter->pdev->dev,
+ "opcode %d-%d is not permitted\n",
+ opcode, subsystem);
} else {
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
CQE_STATUS_EXTD_MASK;
- dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:"
- "status %d, extd-status %d\n",
- opcode, compl_status, extd_status);
+ dev_err(&adapter->pdev->dev,
+ "opcode %d-%d failed:status %d-%d\n",
+ opcode, subsystem, compl_status, extd_status);
}
}
done:
u32 rsvd0[BE_TXP_SW_SZ];
struct be_erx_stats_v1 erx;
struct be_pmem_stats pmem;
- u32 rsvd1[3];
+ u32 rsvd1[18];
};
struct be_cmd_req_get_stats_v1 {
netdev->flags |= IFF_MULTICAST;
- netif_set_gso_max_size(netdev, 65535);
+ netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
netdev->netdev_ops = &be_netdev_ops;
if (priv->mode == MQ_MG_MODE) {
baddr = ®s->txic0;
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
- if (likely(priv->tx_queue[i]->txcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->tx_queue[i]->txcoalescing))
gfar_write(baddr + i, priv->tx_queue[i]->txic);
- }
}
baddr = ®s->rxic0;
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
- if (likely(priv->rx_queue[i]->rxcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->rx_queue[i]->rxcoalescing))
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
- }
}
}
}
config IGB_PTP
bool "PTP Hardware Clock (PHC)"
- default y
- depends on IGB && PTP_1588_CLOCK
+ default n
+ depends on IGB && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want to use PTP Hardware Clock (PHC) in the
driver. Only the basic clock operations have been implemented.
config IXGBE_PTP
bool "PTP Clock Support"
default n
- depends on IXGBE && PTP_1588_CLOCK
+ depends on IXGBE && EXPERIMENTAL
+ select PPS
+ select PTP_1588_CLOCK
---help---
Say Y here if you want support for 1588 Timestamping with a
PHC device, using the PTP 1588 Clock support. This is
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
* @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- __le16 csum, struct sk_buff *skb)
+ struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
if (status & E1000_RXD_STAT_IXSM)
return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
+ /* TCP/UDP checksum error bit or IP checksum error bit is set */
+ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
return;
/* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)swab16((__force u16)csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
adapter->hw_csum_good++;
}
skb_put(skb, length);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
}
}
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
- if (adapter->netdev->features & NETIF_F_RXCSUM) {
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
+ else
rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
ew32(RXCSUM, rxcsum);
if (adapter->hw.mac.type == e1000_pch2lan) {
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
- if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /*
- * IP payload checksum (enabled with jumbos/packet-split when
- * Rx checksum is enabled) and generation of RSS hash is
- * mutually exclusive in the hardware.
- */
- if ((netdev->features & NETIF_F_RXCSUM) &&
- (netdev->features & NETIF_F_RXHASH)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
}
/* Supported frame sizes */
NETIF_F_RXALL)))
return 0;
- /*
- * IP payload checksum (enabled with jumbos/packet-split when Rx
- * checksum is enabled) and generation of RSS hash is mutually
- * exclusive in the hardware.
- */
- if (adapter->rx_ps_pages &&
- (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
- e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
- return -EINVAL;
- }
-
if (changed & NETIF_F_RXFCS) {
if (features & NETIF_F_RXFCS) {
adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
break;
case e1000_i350:
- case e1000_i210:
- case e1000_i211:
mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
break;
default:
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
+ if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
+ (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
+ adapter->current_itr = ec->rx_coalesce_usecs << 2;
+ adapter->requested_itr = 1000000000 /
+ (adapter->current_itr * 256);
+ } else if ((ec->rx_coalesce_usecs == 3) ||
+ (ec->rx_coalesce_usecs == 2)) {
adapter->current_itr = IGBVF_START_ITR;
adapter->requested_itr = ec->rx_coalesce_usecs;
- } else {
- adapter->current_itr = ec->rx_coalesce_usecs << 2;
+ } else if (ec->rx_coalesce_usecs == 0) {
+ /*
+ * The user's desire is to turn off interrupt throttling
+ * altogether, but due to HW limitations, we can't do that.
+ * Instead we set a very small value in EITR, which would
+ * allow ~967k interrupts per second, but allow the adapter's
+ * internal clocking to still function properly.
+ */
+ adapter->current_itr = 4;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
- }
+ } else
+ return -EINVAL;
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
__IXGBE_HANG_CHECK_ARMED,
__IXGBE_RX_RSC_ENABLED,
__IXGBE_RX_CSUM_UDP_ZERO_ERR,
- __IXGBE_RX_FCOE_BUFSZ,
+ __IXGBE_RX_FCOE,
};
#define check_for_tx_hang(ring) \
#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
{
- return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
}
#else
#define ixgbe_rx_pg_order(_ring) 0
f = &adapter->ring_feature[RING_F_FCOE];
if ((rxr_idx >= f->mask) &&
(rxr_idx < f->mask + f->indices))
- set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+ set_bit(__IXGBE_RX_FCOE, &ring->state);
}
#endif /* IXGBE_FCOE */
#ifdef IXGBE_FCOE
/**
* ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
* @rx_desc: advanced rx descriptor
*
* Returns : true if it is FCoE pkt
*/
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
union ixgbe_adv_rx_desc *rx_desc)
{
__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
- return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
/* alloc new page for storage */
if (likely(!page)) {
- page = alloc_pages(GFP_ATOMIC | __GFP_COLD,
+ page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP,
ixgbe_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_rx_page_failed++;
skb->truesize -= ixgbe_rx_bufsz(rx_ring);
}
+#ifdef IXGBE_FCOE
+ /* do not attempt to pad FCoE Frames as this will disrupt DDP */
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+ return false;
+
+#endif
/* if skb_pad returns an error the skb was freed */
if (unlikely(skb->len < 60)) {
int pad_len = 60 - skb->len;
#ifdef IXGBE_FCOE
/* if ddp, not passing to ULD unless for FCP_RSP or error */
- if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
{
struct ixgbe_hw *hw = &adapter->hw;
u32 incval = 0;
+ u32 timinca = 0;
u32 shift = 0;
u32 cycle_speed;
unsigned long flags;
break;
}
- /* Bail if the cycle speed didn't change */
- if (adapter->cycle_speed == cycle_speed)
+ /*
+ * grab the current TIMINCA value from the register so that it can be
+ * double checked. If the register value has been cleared, it must be
+ * reset to the correct value for generating a cyclecounter. If
+ * TIMINCA is zero, the SYSTIME registers do not increment at all.
+ */
+ timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA);
+
+ /* Bail if the cycle speed didn't change and TIMINCA is non-zero */
+ if (adapter->cycle_speed == cycle_speed && timinca)
return;
/* disable the SDP clock out */
if (priv->rx_cq[i].buf)
mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
}
+
+ if (priv->base_tx_qpn) {
+ mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
+ priv->base_tx_qpn = 0;
+ }
}
int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
{
struct mlx4_en_port_profile *prof = priv->prof;
int i;
- int base_tx_qpn, err;
+ int err;
- err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn);
+ err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn);
if (err) {
en_err(priv, "failed reserving range for TX rings\n");
return err;
prof->tx_ring_size, i, TX))
goto err;
- if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i,
+ if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i,
prof->tx_ring_size, TXBB_SIZE))
goto err;
}
err:
en_err(priv, "Failed to allocate NIC resources\n");
- mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num);
return -ENOMEM;
}
en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
/* Configure port */
+ mlx4_en_calc_rx_buf(dev);
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
- MLX4_EN_MIN_MTU,
- 0, 0, 0, 0);
+ priv->rx_skb_size + ETH_FCS_LEN,
+ prof->tx_pause, prof->tx_ppp,
+ prof->rx_pause, prof->rx_ppp);
if (err) {
en_err(priv, "Failed setting port general configurations "
"for port %d, with error %d\n", priv->port, err);
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
!mlx4_is_mfunc(dev)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
+ dev->caps.num_comp_vectors = 1;
+ dev->caps.comp_pool = 0;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
int vids[128];
bool wol;
struct device *ddev;
+ int base_tx_qpn;
#ifdef CONFIG_MLX4_EN_DCB
struct ieee_ets ets;
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
pfn = pci_info[i].id;
- if (pfn > QLCNIC_MAX_PCI_FUNC) {
+ if (pfn >= QLCNIC_MAX_PCI_FUNC) {
ret = QL_STATUS_INVALID_PARAM;
goto err_eswitch;
}
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_34:
RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
break;
default:
}
/* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
/* Restart Rx engine if stopped. */
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
- /* fix the values for the next receiving */
- mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
- sh_eth_read(ndev, RDLAR)) >> 4;
+ /* fix the values for the next receiving if RDE is set */
+ if (intr_status & EESR_RDE)
+ mdp->cur_rx = mdp->dirty_rx =
+ (sh_eth_read(ndev, RDFAR) -
+ sh_eth_read(ndev, RDLAR)) >> 4;
sh_eth_write(ndev, EDRRR_R, EDRRR);
}
EESR_RTSF | /* short frame recv */
EESR_PRE | /* PHY-LSI recv error */
EESR_CERF)){ /* recv frame CRC error */
- sh_eth_rx(ndev);
+ sh_eth_rx(ndev, intr_status);
}
/* Tx Check */
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.name = "Micrel KS8001 or KS8721",
- .phy_id_mask = 0x00fffff0,
+ .phy_id_mask = 0x00ffffff,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
static struct phy_driver ksz9021_driver = {
.phy_id = PHY_ID_KSZ9021,
- .phy_id_mask = 0x000fff10,
+ .phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
- { PHY_ID_KSZ9021, 0x000fff10 },
- { PHY_ID_KS8001, 0x00fffff0 },
+ { PHY_ID_KSZ9021, 0x000ffffe },
+ { PHY_ID_KS8001, 0x00ffffff },
{ PHY_ID_KS8737, 0x00fffff0 },
{ PHY_ID_KS8041, 0x00fffff0 },
{ PHY_ID_KS8051, 0x00fffff0 },
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ USB_DEVICE_AND_INTERFACE_INFO(
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* can be called while disconnecting */
+ if (!dev)
+ return 0;
return qmi_wwan_manage_power(dev, on);
}
return rv;
}
-/* Gobi devices uses identical class/protocol codes for all interfaces regardless
- * of function. Some of these are CDC ACM like and have the exact same endpoints
- * we are looking for. This leaves two possible strategies for identifying the
- * correct interface:
- * a) hardcoding interface number, or
- * b) use the fact that the wwan interface is the only one lacking additional
- * (CDC functional) descriptors
- *
- * Let's see if we can get away with the generic b) solution.
- */
-static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
-{
- int rv = -EINVAL;
-
- /* ignore any interface with additional descriptors */
- if (intf->cur_altsetting->extralen)
- goto err;
-
- rv = qmi_wwan_bind_shared(dev, intf);
-err:
- return rv;
-}
-
static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_driver *subdriver = (void *)dev->data[0];
.manage_power = qmi_wwan_manage_power,
};
-static const struct driver_info qmi_wwan_gobi = {
- .description = "Qualcomm Gobi wwan/QMI device",
+static const struct driver_info qmi_wwan_force_int0 = {
+ .description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
+ .data = BIT(0), /* interface whitelist bitmap */
};
-/* ZTE suck at making USB descriptors */
static const struct driver_info qmi_wwan_force_int1 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.data = BIT(1), /* interface whitelist bitmap */
};
+static const struct driver_info qmi_wwan_force_int3 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(3), /* interface whitelist bitmap */
+};
+
static const struct driver_info qmi_wwan_force_int4 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
static const struct driver_info qmi_wwan_sierra = {
.description = "Sierra Wireless wwan/QMI device",
.flags = FLAG_WWAN,
- .bind = qmi_wwan_bind_gobi,
+ .bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(8) | BIT(19), /* interface whitelist bitmap */
};
#define HUAWEI_VENDOR_ID 0x12D1
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long)&qmi_wwan_force_int3
+
+/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
#define QMI_GOBI_DEVICE(vend, prod) \
USB_DEVICE(vend, prod), \
- .driver_info = (unsigned long)&qmi_wwan_gobi
+ .driver_info = (unsigned long)&qmi_wwan_force_int0
static const struct usb_device_id products[] = {
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_sierra,
},
- {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
- {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
- {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
- {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
- {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
- {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 1000 devices */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
+ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
+ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
+
+ /* Gobi 2000 and 3000 devices */
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
if (info->manage_power) {
retval = info->manage_power(dev, 1);
if (retval < 0)
- goto done;
+ goto done_manage_power_error;
usb_autopm_put_interface(dev->intf);
}
return retval;
+done_manage_power_error:
+ clear_bit(EVENT_DEV_OPEN, &dev->flags);
done:
usb_autopm_put_interface(dev->intf);
done_nopm:
{
struct usbnet *dev = netdev_priv(net);
- strncpy (info->driver, dev->driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
+ strlcpy (info->driver, dev->driver_name, sizeof info->driver);
+ strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strlcpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
}
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
+static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+{
+ struct urb *urb;
+ int i;
+
+ /* don't refill the queue all at once */
+ for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
+ urb = usb_alloc_urb(0, flags);
+ if (urb != NULL) {
+ if (rx_submit(dev, urb, flags) == -ENOLINK)
+ return;
+ }
+ }
+}
+
/*-------------------------------------------------------------------------*/
// tasklet (work deferred from completions, in_irq) or timer
!timer_pending (&dev->delay) &&
!test_bit (EVENT_RX_HALT, &dev->flags)) {
int temp = dev->rxq.qlen;
- int qlen = RX_QLEN (dev);
-
- if (temp < qlen) {
- struct urb *urb;
- int i;
-
- // don't refill the queue all at once
- for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
- urb = usb_alloc_urb (0, GFP_ATOMIC);
- if (urb != NULL) {
- if (rx_submit (dev, urb, GFP_ATOMIC) ==
- -ENOLINK)
- return;
- }
- }
+
+ if (temp < RX_QLEN(dev)) {
+ rx_alloc_submit(dev, GFP_ATOMIC);
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
temp, dev->rxq.qlen);
- if (dev->rxq.qlen < qlen)
+ if (dev->rxq.qlen < RX_QLEN(dev))
tasklet_schedule (&dev->bh);
}
if (dev->txq.qlen < TX_QLEN (dev))
spin_lock_irq(&dev->txq.lock);
/* don't autosuspend while transmitting */
if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
+ dev->suspend_count--;
spin_unlock_irq(&dev->txq.lock);
return -EBUSY;
} else {
spin_unlock_irq(&dev->txq.lock);
if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+ /* handle remote wakeup ASAP */
+ if (!dev->wait &&
+ netif_device_present(dev->net) &&
+ !timer_pending(&dev->delay) &&
+ !test_bit(EVENT_RX_HALT, &dev->flags))
+ rx_alloc_submit(dev, GFP_KERNEL);
+
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
tasklet_schedule (&dev->bh);
}
} else {
dwrq->flags = 1; /* Should be define'd */
- memcpy(extra + sizeof(struct sockaddr)*i,
- &qual, sizeof(struct iw_quality)*i);
+ memcpy(extra + sizeof(struct sockaddr) * i, qual,
+ sizeof(struct iw_quality) * i);
}
dwrq->length = i;
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+ DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
ath5k_txbuf_free_skb(ah, bf);
- spin_lock_bh(&ah->txbuflock);
+ spin_lock(&ah->txbuflock);
list_move_tail(&bf->list, &ah->txbuf);
ah->txbuf_len++;
txq->txq_len--;
- spin_unlock_bh(&ah->txbuflock);
+ spin_unlock(&ah->txbuflock);
}
txq->link = NULL;
txq->txq_poll_mark = false;
enum ath9k_key_type keytype;
u8 keyix;
u8 retries;
+ u8 rtscts_rate;
};
struct ath_buf_state {
priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--;
if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
+ ath9k_htc_choose_set_bssid(priv);
if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1))
ath9k_htc_start_ani(priv);
else if (priv->num_sta_assoc_vif == 0)
}
}
- if (changed & BSS_CHANGED_BSSID) {
+ if (changed & BSS_CHANGED_IBSS) {
if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) {
common->curaid = bss_conf->aid;
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
ath9k_htc_set_bssid(priv);
- } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
- ath9k_htc_choose_set_bssid(priv);
}
}
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+ ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
!ah->is_pciexpress)) {
ah->config.serialize_regmode =
SER_REG_MODE_ON;
u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
{
+ struct ath_common *common = ath9k_hw_common(ah);
+ int i = 0;
+
REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
udelay(100);
REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
- while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
+ while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) {
+
udelay(100);
+ if (WARN_ON_ONCE(i >= 100)) {
+ ath_err(common, "PLL4 meaurement not done\n");
+ break;
+ }
+
+ i++;
+ }
+
return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
}
EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
hw_pll_work.work);
u32 pll_sqsum;
+ /*
+ * ensure that the PLL WAR is executed only
+ * after the STA is associated (or) if the
+ * beaconing had started in interfaces that
+ * uses beacons.
+ */
+ if (!(sc->sc_flags & SC_OP_BEACONS))
+ return;
+
if (AR_SREV_9485(sc->sc_ah)) {
ath9k_ps_wakeup(sc);
}
}
- if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
- ((vif->type == NL80211_IFTYPE_ADHOC) &&
- sc->nvifs > 0)) {
- ath_err(common, "Cannot create ADHOC interface when other"
- " interfaces already exist.\n");
- ret = -EINVAL;
- goto out;
- }
-
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->nvifs++;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
- /* See if new interface type is valid. */
- if ((new_type == NL80211_IFTYPE_ADHOC) &&
- (sc->nvifs > 1)) {
- ath_err(common, "When using ADHOC, it must be the only"
- " interface.\n");
- ret = -EINVAL;
- goto out;
- }
-
if (ath9k_uses_beacons(new_type) &&
!ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
- } else {
- bf = NULL;
}
+
+ bf = NULL;
}
*dest = bf;
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
- if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+ !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
struct ieee80211_tx_rate *rates;
const struct ieee80211_rate *rate;
struct ieee80211_hdr *hdr;
+ struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
int i;
u8 rix = 0;
/* set dur_update_en for l-sig computation except for PS-Poll frames */
info->dur_update = !ieee80211_is_pspoll(hdr->frame_control);
-
- /*
- * We check if Short Preamble is needed for the CTS rate by
- * checking the BSS's global flag.
- * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
- */
- rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
- info->rtscts_rate = rate->hw_value;
-
- if (tx_info->control.vif &&
- tx_info->control.vif->bss_conf.use_short_preamble)
- info->rtscts_rate |= rate->hw_value_short;
+ info->rtscts_rate = fi->rtscts_rate;
for (i = 0; i < 4; i++) {
bool is_40, is_sgi, is_sp;
}
/* legacy rates */
+ rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
!(rate->flags & IEEE80211_RATE_ERP_G))
phy = WLAN_RC_PHY_CCK;
else
phy = WLAN_RC_PHY_OFDM;
- rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
info->rates[i].Rate = rate->hw_value;
if (rate->hw_value_short) {
if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
struct ieee80211_sta *sta = tx_info->control.sta;
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ const struct ieee80211_rate *rate;
struct ath_frame_info *fi = get_frame_info(skb);
struct ath_node *an = NULL;
enum ath9k_key_type keytype;
+ bool short_preamble = false;
+
+ /*
+ * We check if Short Preamble is needed for the CTS rate by
+ * checking the BSS's global flag.
+ * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
+ */
+ if (tx_info->control.vif &&
+ tx_info->control.vif->bss_conf.use_short_preamble)
+ short_preamble = true;
+ rate = ieee80211_get_rts_cts_rate(hw, tx_info);
keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
if (sta)
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
fi->framelen = framelen;
+ fi->rtscts_rate = rate->hw_value;
+ if (short_preamble)
+ fi->rtscts_rate |= rate->hw_value_short;
}
u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
return -EIO;
set_bit(idx, common->keymap);
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ set_bit(idx, common->ccmp_keymap);
+
if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
set_bit(idx, common->tkip_keymap);
return;
clear_bit(key->hw_key_idx, common->keymap);
+ clear_bit(key->hw_key_idx, common->ccmp_keymap);
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
- b43legacyerr(wl, "Fatal: Coult not start device for "
+ b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
return count;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
static ssize_t iwl_dbgfs_log_event_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
return count;
}
+#endif
static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file,
char __user *user_buf,
DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
DEBUGFS_READ_FILE_OPS(reply_tx_error);
DEBUGFS_WRITE_FILE_OPS(echo_test);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+#endif
DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled);
/*
DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR);
+#endif
if (iwl_advanced_bt_coexist(priv))
DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
+ if (ret)
+ break;
+ /*
+ * Clear the in-progress flag, the AP station entry was added
+ * but we'll initialize LQ only when we've associated (which
+ * would also clear the in-progress flag). This is necessary
+ * in case we never initialize LQ because association fails.
+ */
+ spin_lock_bh(&priv->sta_lock);
+ priv->stations[iwl_sta_id(sta)].used &=
+ ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
else
last_seq = priv->rx_seq[tid];
- if (last_seq >= new_node->start_win)
+ if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+ last_seq >= new_node->start_win)
new_node->start_win = last_seq + 1;
new_node->win_size = win_size;
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
- memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+ mwifiex_reset_11n_rx_seq_num(priv);
}
#define ADDBA_RSP_STATUS_ACCEPT 0
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+ memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
u16 seqNum,
u16 tid, u8 *ta,
struct wireless_dev *wdev;
if (!adapter)
- return NULL;
+ return ERR_PTR(-EFAULT);
switch (type) {
case NL80211_IFTYPE_UNSPECIFIED:
if (priv->bss_mode) {
wiphy_err(wiphy,
"cannot create multiple sta/adhoc ifaces\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
wdev->wiphy = wiphy;
priv->wdev = wdev;
if (priv->bss_mode) {
wiphy_err(wiphy, "Can't create multiple AP interfaces");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
if (!wdev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
priv->wdev = wdev;
wdev->wiphy = wiphy;
break;
default:
wiphy_err(wiphy, "type not supported\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name,
ether_setup, 1);
if (!dev) {
wiphy_err(wiphy, "no memory available for netdevice\n");
- goto error;
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-ENOMEM);
}
mwifiex_init_priv_params(priv, dev);
/* Register network device */
if (register_netdevice(dev)) {
wiphy_err(wiphy, "cannot register virtual network device\n");
- goto error;
+ free_netdev(dev);
+ priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+ return ERR_PTR(-EFAULT);
}
sema_init(&priv->async_sem, 1);
mwifiex_dev_debugfs_init(priv);
#endif
return dev;
-error:
- if (dev && (dev->reg_state == NETREG_UNREGISTERED))
- free_netdev(dev);
- priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
-
- return NULL;
}
EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
/* save assoc resp ie index after auto-indexing */
*assoc_idx = *((u16 *)pos);
+ kfree(ap_custom_ie);
return ret;
}
dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
adapter->event_cause = *(u32 *) skb->data;
- skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
- memcpy(adapter->event_body, skb->data, skb->len);
+ memcpy(adapter->event_body,
+ skb->data + MWIFIEX_EVENT_HEADER_LEN,
+ skb->len);
/* event cause has been saved to adapter->event_cause */
adapter->event_received = true;
break;
case EVENT_UAP_STA_ASSOC:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
memset(&sinfo, 0, sizeof(sinfo));
- event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+ event = (struct mwifiex_assoc_event *)
+ (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
len = -1;
GFP_KERNEL);
break;
case EVENT_UAP_STA_DEAUTH:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
- cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
- GFP_KERNEL);
+ cfg80211_del_sta(priv->netdev, adapter->event_body +
+ MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
goto done;
for (i = 0; i < adapter->priv_num; i++) {
-
tpriv = adapter->priv[i];
- if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) &&
- (tpriv->media_connected)) {
- if (netif_queue_stopped(tpriv->netdev))
- mwifiex_wake_up_net_dev_queue(tpriv->netdev,
- adapter);
- }
+ if (tpriv->media_connected &&
+ netif_queue_stopped(tpriv->netdev))
+ mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter);
}
done:
dev_kfree_skb_any(skb);
struct cfg80211_ap_settings *params) {
int i;
+ if (!params->privacy) {
+ bss_config->protocol = PROTOCOL_NO_SECURITY;
+ bss_config->key_mgmt = KEY_MGMT_NONE;
+ bss_config->wpa_cfg.length = 0;
+ priv->sec_info.wep_enabled = 0;
+ priv->sec_info.wpa_enabled = 0;
+ priv->sec_info.wpa2_enabled = 0;
+
+ return 0;
+ }
+
switch (params->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
bss_config->auth_mode = WLAN_AUTH_OPEN;
struct device *dev = adapter->dev;
u32 recv_type;
__le32 tmp;
+ int ret;
if (adapter->hs_activated)
mwifiex_process_hs_config(adapter);
case MWIFIEX_USB_TYPE_CMD:
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
dev_err(dev, "CMD: skb->len too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
} else if (!adapter->curr_cmd) {
dev_dbg(dev, "CMD: no curr_cmd\n");
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(
adapter, skb->data,
skb->len);
- return 0;
+ ret = 0;
+ goto exit_restore_skb;
}
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
adapter->curr_cmd->resp_skb = skb;
case MWIFIEX_USB_TYPE_EVENT:
if (skb->len < sizeof(u32)) {
dev_err(dev, "EVENT: skb->len too small\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
adapter->event_cause = le32_to_cpu(tmp);
- skb_pull(skb, sizeof(u32));
dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
if (skb->len > MAX_EVENT_SIZE) {
dev_err(dev, "EVENT: event body too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
- skb_copy_from_linear_data(skb, adapter->event_body,
- skb->len);
+ memcpy(adapter->event_body, skb->data +
+ MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
adapter->event_received = true;
adapter->event_skb = skb;
break;
}
return -EINPROGRESS;
+
+exit_restore_skb:
+ /* The buffer will be reused for further cmds/events */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ return ret;
}
static void mwifiex_usb_rx_complete(struct urb *urb)
priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ mwifiex_reset_11n_rx_seq_num(priv);
+
atomic_set(&priv->wmm.tx_pkts_queued, 0);
atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
}
if (!ptr->is_11n_enabled ||
mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+ priv->wps.session_enable ||
((priv->sec_info.wpa_enabled ||
priv->sec_info.wpa2_enabled) &&
!priv->wpa_is_gtk_set)) {
while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
matched) {
- if (!ether_addr_equal(bssid->mac, match_bssid))
+ if (ether_addr_equal(bssid->mac, match_bssid))
*matched = true;
}
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
}
*mactime = tsf_info->current_tsf_lsb |
- (tsf_info->current_tsf_msb << 31);
+ ((u64)tsf_info->current_tsf_msb << 32);
out:
kfree(tsf_info);
}
}
- if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
- wl->station_mode != STATION_ACTIVE_MODE) {
+ if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
/* indicate to the stack, that beacons have been lost */
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_wake(struct wl1251 *wl)
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
}
static void wl1251_spi_reset_wake(struct wl1251 *wl)
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && GENERIC_HARDIRQS && MAC80211
- depends on INET
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
dev_dbg(&dev->dev, "%s\n", dev->nodename);
- unregister_netdev(info->netdev);
-
xennet_disconnect_backend(info);
- del_timer_sync(&info->rx_refill_timer);
-
xennet_sysfs_delif(info->netdev);
+ unregister_netdev(info->netdev);
+
+ del_timer_sync(&info->rx_refill_timer);
+
free_percpu(info->stats);
free_netdev(info->netdev);
}
EXPORT_SYMBOL(of_find_node_with_property);
+static const struct of_device_id *of_match_compat(const struct of_device_id *matches,
+ const char *compat)
+{
+ while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+ const char *cp = matches->compatible;
+ int len = strlen(cp);
+
+ if (len > 0 && of_compat_cmp(compat, cp, len) == 0)
+ return matches;
+
+ matches++;
+ }
+
+ return NULL;
+}
+
/**
* of_match_node - Tell if an device_node has a matching of_match structure
* @matches: array of of device match structures to search in
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
{
+ struct property *prop;
+ const char *cp;
+
if (!matches)
return NULL;
+ of_property_for_each_string(node, "compatible", prop, cp) {
+ const struct of_device_id *match = of_match_compat(matches, cp);
+ if (match)
+ return match;
+ }
+
while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
int match = 1;
if (matches->name[0])
if (matches->type[0])
match &= node->type
&& !strcmp(matches->type, node->type);
- if (matches->compatible[0])
- match &= of_device_is_compatible(node,
- matches->compatible);
- if (match)
+ if (match && !matches->compatible[0])
return matches;
matches++;
}
of_node_put(root);
return rc;
}
+EXPORT_SYMBOL_GPL(of_platform_populate);
#endif /* CONFIG_OF_ADDRESS */
static DEFINE_MUTEX(oprofile_perf_mutex);
static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
+static struct perf_event **perf_events[NR_CPUS];
static int num_counters;
/*
free_group:
if (!purecfg)
- free(group);
+ kfree(group);
free:
kfree(new_map);
return ret;
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
- /* Handle this special glitch on altfunction C */
+ /*
+ * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+ * we may pass through an undesired state. In this case we take
+ * some extra care.
+ *
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ * - Save SLPM registers (since we have a shadow register in the
+ * nmk_chip we're using that as backup)
+ * - Set SLPM=0 for the IOs you want to switch and others to 1
+ * - Configure the GPIO registers for the IOs that are being switched
+ * - Set IOFORCE=1
+ * - Modify the AFLSA/B registers for the IOs that are being switched
+ * - Set IOFORCE=0
+ * - Restore SLPM registers
+ * - Any spurious wake up event during switch sequence to be ignored
+ * and cleared
+ *
+ * We REALLY need to save ALL slpm registers, because the external
+ * IOFORCE will switch *all* ports to their sleepmode setting to as
+ * to avoid glitches. (Not just one port!)
+ */
glitch = (g->altsetting == NMK_GPIO_ALT_C);
if (glitch) {
* Driver for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired from:
* - U300 Pinctl drivers
* Driver header file for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Driver for the ST Microelectronics SPEAr1310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr1340 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1340_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr300 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear300_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr320 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear320_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Header file for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
pmic->desc[id].vsel_mask = SMPS10_VSEL;
- pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+ pmic->desc[id].enable_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_STATUS);
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
pmic->desc[id].owner = THIS_MODULE;
- pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+ pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+ palmas_regs_info[id].ctrl_addr);
pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
if (pdata && pdata->reg_data)
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4))
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
info = &supply_info[rdev_get_id(rdev)];
if (info->flags & FIXED_VOLTAGE)
- return info->fixed_voltage;
+ return 0;
ret = read_field(hw, &info->voltage);
if (ret < 0)
config REMOTEPROC
tristate
depends on EXPERIMENTAL
+ select FW_CONFIG
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
+ depends on EXPERIMENTAL
depends on ARCH_OMAP4
depends on OMAP_IOMMU
select REMOTEPROC
rpdev->id.name);
}
+/**
+ * __ept_release() - deallocate an rpmsg endpoint
+ * @kref: the ept's reference count
+ *
+ * This function deallocates an ept, and is invoked when its @kref refcount
+ * drops to zero.
+ *
+ * Never invoke this function directly!
+ */
+static void __ept_release(struct kref *kref)
+{
+ struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
+ refcount);
+ /*
+ * At this point no one holds a reference to ept anymore,
+ * so we can directly free it
+ */
+ kfree(ept);
+}
+
/* for more info, see below documentation of rpmsg_create_ept() */
static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
return NULL;
}
+ kref_init(&ept->refcount);
+ mutex_init(&ept->cb_lock);
+
ept->rpdev = rpdev;
ept->cb = cb;
ept->priv = priv;
idr_remove(&vrp->endpoints, request);
free_ept:
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ kref_put(&ept->refcount, __ept_release);
return NULL;
}
static void
__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
{
+ /* make sure new inbound messages can't find this ept anymore */
mutex_lock(&vrp->endpoints_lock);
idr_remove(&vrp->endpoints, ept->addr);
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ /* make sure in-flight inbound messages won't invoke cb anymore */
+ mutex_lock(&ept->cb_lock);
+ ept->cb = NULL;
+ mutex_unlock(&ept->cb_lock);
+
+ kref_put(&ept->refcount, __ept_release);
}
/**
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
+
ept = idr_find(&vrp->endpoints, msg->dst);
+
+ /* let's make sure no one deallocates ept while we use it */
+ if (ept)
+ kref_get(&ept->refcount);
+
mutex_unlock(&vrp->endpoints_lock);
- if (ept && ept->cb)
- ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
- else
+ if (ept) {
+ /* make sure ept->cb doesn't go away while we use it */
+ mutex_lock(&ept->cb_lock);
+
+ if (ept->cb)
+ ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
+ msg->src);
+
+ mutex_unlock(&ept->cb_lock);
+
+ /* farewell, ept, we don't need you anymore */
+ kref_put(&ept->refcount, __ept_release);
+ } else
dev_warn(dev, "msg received with no recepient\n");
/* publish the real size of the buffer */
{
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = ha->tgt.qla_tgt;
- int reason_code;
+ int login_code;
ql_dbg(ql_dbg_tgt, vha, 0xe039,
"scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n",
{
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
"qla_target(%d): Async LOOP_UP occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
if (tgt->link_reinit_iocb_pending) {
qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb,
0, 0, 0, 0, 0, 0);
case MBA_RSCN_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
"qla_target(%d): Async event %#x occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
"qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
- "m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
- reason_code = le16_to_cpu(mailbox[2]);
- if (reason_code == 0x4)
+ "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+ "m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+ login_code = le16_to_cpu(mailbox[2]);
+ if (login_code == 0x4)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
"Async MB 2: Got PLOGI Complete\n");
- else if (reason_code == 0x7)
+ else if (login_code == 0x7)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
"Async MB 2: Port Logged Out\n");
break;
default:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
"qla_target(%d): Async event %#x occured: "
- "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
}
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
- cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
cs = spi->controller_state;
list_del(&cs->node);
+ kfree(cs);
}
if (spi->chip_select < spi->master->num_chipselect) {
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
void netlink_exit(struct sock *sock)
{
- sock_release(sock->sk_socket);
+ netlink_kernel_release(sock);
}
int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
static struct lirc_serial hardware[] = {
[LIRC_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
},
[LIRC_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = UART_MCR_OUT2,
},
[LIRC_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
},
[LIRC_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = 0,
},
[LIRC_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
* See also http://www.nslu2-linux.org for this device
*/
[LIRC_NSLU2] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
.signal_pin = UART_MSR_CTS,
.signal_pin_change = UART_MSR_DCTS,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
struct ft_tport *tport;
int i;
- tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP],
+ lockdep_is_held(&ft_lport_lock));
if (tport && tport->tpg)
return tport;
/**
* serial8250_register_8250_port - register a serial port
- * @port: serial port template
+ * @up: serial port template
*
* Configure the serial port specified by the request. If the
* port exists and is in use, it is hung up and unregistered
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
-/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
- "Feiya",
- "QDI U2 DISK",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_READ_CAPACITY_16 ),
-
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
struct vhost_dev *dev = data;
struct vhost_work *work = NULL;
unsigned uninitialized_var(seq);
+ mm_segment_t oldfs = get_fs();
+ set_fs(USER_DS);
use_mm(dev->mm);
for (;;) {
}
unuse_mm(dev->mm);
+ set_fs(oldfs);
return 0;
}
struct task_struct *thread;
/* Waiting for host to ack the pages we released. */
- struct completion acked;
+ wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
static void balloon_ack(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (vb)
- complete(&vb->acked);
+ wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
+ unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
- init_completion(&vb->acked);
-
/* We should always be able to add one buffer to an empty queue. */
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
- wait_for_completion(&vb->acked);
+ wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static void set_page_pfns(u32 pfns[], struct page *page)
*/
static void stats_request(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (!vb)
- return;
vb->need_stats_update = 1;
wake_up(&vb->config_change);
}
{
struct virtqueue *vq;
struct scatterlist sg;
+ unsigned int len;
vb->need_stats_update = 0;
update_balloon_stats(vb);
vq = vb->stats_vq;
+ if (!virtqueue_get_buf(vq, &len))
+ return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats));
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
INIT_LIST_HEAD(&vb->pages);
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
+ init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
vb->need_stats_update = 0;
} __attribute__((packed));
static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump;
+static unsigned int allow_kdump = 1;
static unsigned int is_icru;
static DEFINE_SPINLOCK(rom_lock);
static void *cru_rom_addr;
static void hpwdt_exit_nmi_decoding(void)
{
unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+ unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
if (cru_rom_addr)
iounmap(cru_rom_addr);
}
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRV_NAME);
* Watchdog driver for ARM SP805 watchdog module
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is" without any
module_amba_driver(sp805_wdt_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
MODULE_LICENSE("GPL");
sizeof(struct watchdog_info)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
err = watchdog_get_status(wdd, &val);
- if (err)
+ if (err == -ENODEV)
return err;
return put_user(val, p);
case WDIOC_GETBOOTSTATUS:
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
struct ulist *parents, int level,
- struct btrfs_key *key, u64 time_seq,
+ struct btrfs_key *key_for_search, u64 time_seq,
u64 wanted_disk_byte,
const u64 *extent_item_pos)
{
- int ret;
- int slot = path->slots[level];
- struct extent_buffer *eb = path->nodes[level];
+ int ret = 0;
+ int slot;
+ struct extent_buffer *eb;
+ struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL;
u64 disk_byte;
- u64 wanted_objectid = key->objectid;
-add_parent:
- if (level == 0 && extent_item_pos) {
- fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
- ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+ if (level != 0) {
+ eb = path->nodes[level];
+ ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
- }
- ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
- if (ret < 0)
- return ret;
-
- if (level != 0)
return 0;
+ }
/*
- * if the current leaf is full with EXTENT_DATA items, we must
- * check the next one if that holds a reference as well.
- * ref->count cannot be used to skip this check.
- * repeat this until we don't find any additional EXTENT_DATA items.
+ * We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot==nritems. In that case, go to the next leaf before we continue.
*/
- while (1) {
- eie = NULL;
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
ret = btrfs_next_old_leaf(root, path, time_seq);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
+ while (!ret) {
eb = path->nodes[0];
- for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
- btrfs_item_key_to_cpu(eb, key, slot);
- if (key->objectid != wanted_objectid ||
- key->type != BTRFS_EXTENT_DATA_KEY)
- return 0;
- fi = btrfs_item_ptr(eb, slot,
- struct btrfs_file_extent_item);
- disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
- if (disk_byte == wanted_disk_byte)
- goto add_parent;
+ slot = path->slots[0];
+
+ btrfs_item_key_to_cpu(eb, &key, slot);
+
+ if (key.objectid != key_for_search->objectid ||
+ key.type != BTRFS_EXTENT_DATA_KEY)
+ break;
+
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+ if (disk_byte == wanted_disk_byte) {
+ eie = NULL;
+ if (extent_item_pos) {
+ ret = check_extent_in_eb(&key, eb, fi,
+ *extent_item_pos,
+ &eie);
+ if (ret < 0)
+ break;
+ }
+ if (!ret) {
+ ret = ulist_add(parents, eb->start,
+ (unsigned long)eie, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!extent_item_pos) {
+ ret = btrfs_next_old_leaf(root, path,
+ time_seq);
+ continue;
+ }
+ }
}
+ ret = btrfs_next_old_item(root, path, time_seq);
}
- return 0;
+ if (ret > 0)
+ ret = 0;
+ return ret;
}
/*
struct btrfs_path *path;
struct btrfs_root *root;
struct btrfs_key root_key;
- struct btrfs_key key = {0};
struct extent_buffer *eb;
int ret = 0;
int root_level;
goto out;
eb = path->nodes[level];
- if (!eb) {
- WARN_ON(1);
- ret = 1;
- goto out;
+ while (!eb) {
+ if (!level) {
+ WARN_ON(1);
+ ret = 1;
+ goto out;
+ }
+ level--;
+ eb = path->nodes[level];
}
- if (level == 0)
- btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
-
- ret = add_all_parents(root, path, parents, level, &key, time_seq,
- ref->wanted_disk_byte, extent_item_pos);
+ ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+ time_seq, ref->wanted_disk_byte,
+ extent_item_pos);
out:
btrfs_free_path(path);
return ret;
}
ret = __add_delayed_refs(head, delayed_ref_seq,
&prefs_delayed);
+ mutex_unlock(&head->mutex);
if (ret) {
spin_unlock(&delayed_refs->lock);
goto out;
}
out:
- if (head)
- mutex_unlock(&head->mutex);
btrfs_free_path(path);
while (!list_empty(&prefs)) {
ref = list_first_entry(&prefs, struct __prelim_ref, list);
if (!looped && !tm)
return 0;
/*
- * we must have key remove operations in the log before the
- * replace operation.
+ * if there are no tree operation for the oldest root, we simply
+ * return it. this should only happen if that (old) root is at
+ * level 0.
*/
- BUG_ON(!tm);
+ if (!tm)
+ break;
+ /*
+ * if there's an operation that's not a root replacement, we
+ * found the oldest version of our root. normally, we'll find a
+ * MOD_LOG_KEY_REMOVE_WHILE_FREEING operation here.
+ */
if (tm->op != MOD_LOG_ROOT_REPLACE)
break;
tm->generation);
break;
case MOD_LOG_KEY_ADD:
- if (tm->slot != n - 1) {
- o_dst = btrfs_node_key_ptr_offset(tm->slot);
- o_src = btrfs_node_key_ptr_offset(tm->slot + 1);
- memmove_extent_buffer(eb, o_dst, o_src, p_size);
- }
+ /* if a move operation is needed it's in the log */
n--;
break;
case MOD_LOG_MOVE_KEYS:
}
tm = tree_mod_log_search(root->fs_info, logical, time_seq);
- /*
- * there was an item in the log when __tree_mod_log_oldest_root
- * returned. this one must not go away, because the time_seq passed to
- * us must be blocking its removal.
- */
- BUG_ON(!tm);
-
if (old_root)
- eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
- root->nodesize);
+ eb = alloc_dummy_extent_buffer(logical, root->nodesize);
else
eb = btrfs_clone_extent_buffer(root->node);
btrfs_tree_read_unlock(root->node);
btrfs_set_header_level(eb, old_root->level);
btrfs_set_header_generation(eb, old_generation);
}
- __tree_mod_log_rewind(eb, time_seq, tm);
+ if (tm)
+ __tree_mod_log_rewind(eb, time_seq, tm);
+ else
+ WARN_ON(btrfs_header_level(eb) != 0);
extent_buffer_get(eb);
return eb;
static void insert_ptr(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_disk_key *key, u64 bytenr,
- int slot, int level, int tree_mod_log)
+ int slot, int level)
{
struct extent_buffer *lower;
int nritems;
BUG_ON(slot > nritems);
BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(root));
if (slot != nritems) {
- if (tree_mod_log && level)
+ if (level)
tree_mod_log_eb_move(root->fs_info, lower, slot + 1,
slot, nritems - slot);
memmove_extent_buffer(lower,
btrfs_node_key_ptr_offset(slot),
(nritems - slot) * sizeof(struct btrfs_key_ptr));
}
- if (tree_mod_log && level) {
+ if (level) {
ret = tree_mod_log_insert_key(root->fs_info, lower, slot,
MOD_LOG_KEY_ADD);
BUG_ON(ret < 0);
btrfs_mark_buffer_dirty(split);
insert_ptr(trans, root, path, &disk_key, split->start,
- path->slots[level + 1] + 1, level + 1, 1);
+ path->slots[level + 1] + 1, level + 1);
if (path->slots[level] >= mid) {
path->slots[level] -= mid;
btrfs_set_header_nritems(l, mid);
btrfs_item_key(right, &disk_key, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_mark_buffer_dirty(right);
btrfs_mark_buffer_dirty(l);
if (mid <= slot) {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
} else {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1], 1, 0);
+ path->slots[1], 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
if (!path->skip_locking) {
ret = btrfs_try_tree_read_lock(next);
+ if (!ret && time_seq) {
+ /*
+ * If we don't get the lock, we may be racing
+ * with push_leaf_left, holding that lock while
+ * itself waiting for the leaf we've currently
+ * locked. To solve this situation, we give up
+ * on our lock and cycle.
+ */
+ btrfs_release_path(path);
+ cond_resched();
+ goto again;
+ }
if (!ret) {
btrfs_set_path_blocking(path);
btrfs_tree_read_lock(next);
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
u64 time_seq);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+ struct btrfs_path *p, u64 time_seq)
{
++p->slots[0];
if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
- return btrfs_next_leaf(root, p);
+ return btrfs_next_old_leaf(root, p, time_seq);
return 0;
}
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+ return btrfs_next_old_item(root, p, 0);
+}
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
BTRFS_CSUM_TREE_OBJECTID, csum_root);
if (ret)
goto recovery_tree_root;
-
csum_root->track_dirty = 1;
fs_info->generation = generation;
fs_info->last_trans_committed = generation;
+ ret = btrfs_recover_balance(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to recover balance\n");
+ goto fail_block_groups;
+ }
+
ret = btrfs_init_dev_stats(fs_info);
if (ret) {
printk(KERN_ERR "btrfs: failed to init dev_stats: %d\n",
goto fail_trans_kthread;
}
- if (!(sb->s_flags & MS_RDONLY)) {
- down_read(&fs_info->cleanup_work_sem);
- err = btrfs_orphan_cleanup(fs_info->fs_root);
- if (!err)
- err = btrfs_orphan_cleanup(fs_info->tree_root);
- up_read(&fs_info->cleanup_work_sem);
+ if (sb->s_flags & MS_RDONLY)
+ return 0;
- if (!err)
- err = btrfs_recover_balance(fs_info->tree_root);
+ down_read(&fs_info->cleanup_work_sem);
+ if ((ret = btrfs_orphan_cleanup(fs_info->fs_root)) ||
+ (ret = btrfs_orphan_cleanup(fs_info->tree_root))) {
+ up_read(&fs_info->cleanup_work_sem);
+ close_ctree(tree_root);
+ return ret;
+ }
+ up_read(&fs_info->cleanup_work_sem);
- if (err) {
- close_ctree(tree_root);
- return err;
- }
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to resume balance\n");
+ close_ctree(tree_root);
+ return ret;
}
return 0;
mutex_unlock(&head->mutex);
btrfs_put_delayed_ref(ref);
+ spin_lock(&delayed_refs->lock);
continue;
}
return count;
}
-
static void wait_for_more_refs(struct btrfs_delayed_ref_root *delayed_refs,
- unsigned long num_refs)
+ unsigned long num_refs,
+ struct list_head *first_seq)
{
- struct list_head *first_seq = delayed_refs->seq_head.next;
-
spin_unlock(&delayed_refs->lock);
pr_debug("waiting for more refs (num %ld, first %p)\n",
num_refs, first_seq);
struct btrfs_delayed_ref_root *delayed_refs;
struct btrfs_delayed_ref_node *ref;
struct list_head cluster;
+ struct list_head *first_seq = NULL;
int ret;
u64 delayed_start;
int run_all = count == (unsigned long)-1;
*/
consider_waiting = 1;
num_refs = delayed_refs->num_entries;
+ first_seq = root->fs_info->tree_mod_seq_list.next;
} else {
- wait_for_more_refs(delayed_refs, num_refs);
+ wait_for_more_refs(delayed_refs,
+ num_refs, first_seq);
/*
* after waiting, things have changed. we
* dropped the lock and someone else might have
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
+ struct inode *inode = mapping->host;
int ret = 0;
int done = 0;
int nr_to_write_done = 0;
int scanned = 0;
int tag;
+ /*
+ * We have to hold onto the inode so that ordered extents can do their
+ * work when the IO finishes. The alternative to this is failing to add
+ * an ordered extent if the igrab() fails there and that is a huge pain
+ * to deal with, so instead just hold onto the inode throughout the
+ * writepages operation. If it fails here we are freeing up the inode
+ * anyway and we'd rather not waste our time writing out stuff that is
+ * going to be truncated anyway.
+ */
+ if (!igrab(inode))
+ return 0;
+
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
index = 0;
goto retry;
}
+ btrfs_add_delayed_iput(inode);
return ret;
}
loff_t *ppos, size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = fdentry(file)->d_inode;
struct iov_iter i;
ssize_t written;
ssize_t written_buffered;
written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
count, ocount);
- /*
- * the generic O_DIRECT will update in-memory i_size after the
- * DIOs are done. But our endio handlers that update the on
- * disk i_size never update past the in memory i_size. So we
- * need one more update here to catch any additions to the
- * file
- */
- if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
- btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- mark_inode_dirty(inode);
- }
-
if (written < 0 || written == count)
return written;
end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1;
/*
- * XXX - this can go away after a few releases.
- *
- * since the only user of btrfs_remove_free_space is the tree logging
- * stuff, and the only way to test that is under crash conditions, we
- * want to have this debug stuff here just in case somethings not
- * working. Search the bitmap for the space we are trying to use to
- * make sure its actually there. If its not there then we need to stop
- * because something has gone wrong.
+ * We need to search for bits in this bitmap. We could only cover some
+ * of the extent in this bitmap thanks to how we add space, so we need
+ * to search for as much as it as we can and clear that amount, and then
+ * go searching for the next bit.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
search_bytes = min(search_bytes, end - search_start + 1);
ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes);
BUG_ON(ret < 0 || search_start != *offset);
- if (*offset > bitmap_info->offset && *offset + *bytes > end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1);
- *bytes -= end - *offset + 1;
- *offset = end + 1;
- } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes);
- *bytes = 0;
- }
+ /* We may have found more bits than what we need */
+ search_bytes = min(search_bytes, *bytes);
+
+ /* Cannot clear past the end of the bitmap */
+ search_bytes = min(search_bytes, end - search_start + 1);
+
+ bitmap_clear_bits(ctl, bitmap_info, search_start, search_bytes);
+ *offset += search_bytes;
+ *bytes -= search_bytes;
if (*bytes) {
struct rb_node *next = rb_next(&bitmap_info->offset_index);
* everything over again.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
ret = search_bitmap(ctl, bitmap_info, &search_start,
&search_bytes);
if (ret < 0 || search_start != *offset)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *info;
- struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&ctl->tree_lock);
again:
+ if (!bytes)
+ goto out_lock;
+
info = tree_search_offset(ctl, offset, 0, 0);
if (!info) {
/*
}
}
- if (info->bytes < bytes && rb_next(&info->offset_index)) {
- u64 end;
- next_info = rb_entry(rb_next(&info->offset_index),
- struct btrfs_free_space,
- offset_index);
-
- if (next_info->bitmap)
- end = next_info->offset +
- BITS_PER_BITMAP * ctl->unit - 1;
- else
- end = next_info->offset + next_info->bytes;
-
- if (next_info->bytes < bytes ||
- next_info->offset > offset || offset > end) {
- printk(KERN_CRIT "Found free space at %llu, size %llu,"
- " trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
- WARN_ON(1);
- ret = -EINVAL;
- goto out_lock;
- }
-
- info = next_info;
- }
-
- if (info->bytes == bytes) {
+ if (!info->bitmap) {
unlink_free_space(ctl, info);
- if (info->bitmap) {
- kfree(info->bitmap);
- ctl->total_bitmaps--;
- }
- kmem_cache_free(btrfs_free_space_cachep, info);
- ret = 0;
- goto out_lock;
- }
-
- if (!info->bitmap && info->offset == offset) {
- unlink_free_space(ctl, info);
- info->offset += bytes;
- info->bytes -= bytes;
- ret = link_free_space(ctl, info);
- WARN_ON(ret);
- goto out_lock;
- }
+ if (offset == info->offset) {
+ u64 to_free = min(bytes, info->bytes);
+
+ info->bytes -= to_free;
+ info->offset += to_free;
+ if (info->bytes) {
+ ret = link_free_space(ctl, info);
+ WARN_ON(ret);
+ } else {
+ kmem_cache_free(btrfs_free_space_cachep, info);
+ }
- if (!info->bitmap && info->offset <= offset &&
- info->offset + info->bytes >= offset + bytes) {
- u64 old_start = info->offset;
- /*
- * we're freeing space in the middle of the info,
- * this can happen during tree log replay
- *
- * first unlink the old info and then
- * insert it again after the hole we're creating
- */
- unlink_free_space(ctl, info);
- if (offset + bytes < info->offset + info->bytes) {
- u64 old_end = info->offset + info->bytes;
+ offset += to_free;
+ bytes -= to_free;
+ goto again;
+ } else {
+ u64 old_end = info->bytes + info->offset;
- info->offset = offset + bytes;
- info->bytes = old_end - info->offset;
+ info->bytes = offset - info->offset;
ret = link_free_space(ctl, info);
WARN_ON(ret);
if (ret)
goto out_lock;
- } else {
- /* the hole we're creating ends at the end
- * of the info struct, just free the info
- */
- kmem_cache_free(btrfs_free_space_cachep, info);
- }
- spin_unlock(&ctl->tree_lock);
- /* step two, insert a new info struct to cover
- * anything before the hole
- */
- ret = btrfs_add_free_space(block_group, old_start,
- offset - old_start);
- WARN_ON(ret); /* -ENOMEM */
- goto out;
+ /* Not enough bytes in this entry to satisfy us */
+ if (old_end < offset + bytes) {
+ bytes -= old_end - offset;
+ offset = old_end;
+ goto again;
+ } else if (old_end == offset + bytes) {
+ /* all done */
+ goto out_lock;
+ }
+ spin_unlock(&ctl->tree_lock);
+
+ ret = btrfs_add_free_space(block_group, offset + bytes,
+ old_end - (offset + bytes));
+ WARN_ON(ret);
+ goto out;
+ }
}
ret = remove_from_bitmap(ctl, info, &offset, &bytes);
async_cow->start, async_cow->end, async_cow,
&num_added);
if (num_added == 0) {
- iput(async_cow->inode);
+ btrfs_add_delayed_iput(async_cow->inode);
async_cow->inode = NULL;
}
}
struct async_cow *async_cow;
async_cow = container_of(work, struct async_cow, work);
if (async_cow->inode)
- iput(async_cow->inode);
+ btrfs_add_delayed_iput(async_cow->inode);
kfree(async_cow);
}
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
- BUG_ON(!test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
+ BUG_ON(test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&BTRFS_I(inode)->runtime_flags));
goto no_delete;
}
bh_result->b_size = len;
bh_result->b_bdev = em->bdev;
set_buffer_mapped(bh_result);
- if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
- set_buffer_new(bh_result);
+ if (create) {
+ if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ set_buffer_new(bh_result);
+
+ /*
+ * Need to update the i_size under the extent lock so buffered
+ * readers will get the updated i_size when we unlock.
+ */
+ if (start + len > i_size_read(inode))
+ i_size_write(inode, start + len);
+ }
free_extent_map(em);
*/
ordered = btrfs_lookup_ordered_range(inode, lockstart,
lockend - lockstart + 1);
- if (!ordered)
+
+ /*
+ * We need to make sure there are no buffered pages in this
+ * range either, we could have raced between the invalidate in
+ * generic_file_direct_write and locking the extent. The
+ * invalidate needs to happen so that reads after a write do not
+ * get stale data.
+ */
+ if (!ordered && (!writing ||
+ !test_range_bit(&BTRFS_I(inode)->io_tree,
+ lockstart, lockend, EXTENT_UPTODATE, 0,
+ cached_state)))
break;
+
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
&cached_state, GFP_NOFS);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
+
+ if (ordered) {
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ } else {
+ /* Screw you mmap */
+ ret = filemap_write_and_wait_range(file->f_mapping,
+ lockstart,
+ lockend);
+ if (ret)
+ goto out;
+
+ /*
+ * If we found a page that couldn't be invalidated just
+ * fall back to buffered.
+ */
+ ret = invalidate_inode_pages2_range(file->f_mapping,
+ lockstart >> PAGE_CACHE_SHIFT,
+ lockend >> PAGE_CACHE_SHIFT);
+ if (ret) {
+ if (ret == -EBUSY)
+ ret = 0;
+ goto out;
+ }
+ }
+
cond_resched();
}
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
struct btrfs_ioctl_vol_args_v2)
-#define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64)
+#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64)
#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64)
#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \
struct btrfs_ioctl_scrub_args)
if (ret)
goto restore;
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret)
+ goto restore;
+
sb->s_flags &= ~MS_RDONLY;
}
kfree(name);
iput(inode);
+
+ btrfs_run_delayed_items(trans, root);
return ret;
}
ret = btrfs_unlink_inode(trans, root, dir,
inode, victim_name,
victim_name_len);
+ btrfs_run_delayed_items(trans, root);
}
kfree(victim_name);
ptr = (unsigned long)(victim_ref + 1) + victim_name_len;
ret = btrfs_unlink_inode(trans, root, dir, inode,
name, name_len);
BUG_ON(ret);
+
+ btrfs_run_delayed_items(trans, root);
+
kfree(name);
iput(inode);
static int balance_kthread(void *data)
{
- struct btrfs_balance_control *bctl =
- (struct btrfs_balance_control *)data;
- struct btrfs_fs_info *fs_info = bctl->fs_info;
+ struct btrfs_fs_info *fs_info = data;
int ret = 0;
mutex_lock(&fs_info->volume_mutex);
mutex_lock(&fs_info->balance_mutex);
- set_balance_control(bctl);
-
- if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
- printk(KERN_INFO "btrfs: force skipping balance\n");
- } else {
+ if (fs_info->balance_ctl) {
printk(KERN_INFO "btrfs: continuing balance\n");
- ret = btrfs_balance(bctl, NULL);
+ ret = btrfs_balance(fs_info->balance_ctl, NULL);
}
mutex_unlock(&fs_info->balance_mutex);
mutex_unlock(&fs_info->volume_mutex);
+
return ret;
}
-int btrfs_recover_balance(struct btrfs_root *tree_root)
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info)
{
struct task_struct *tsk;
+
+ spin_lock(&fs_info->balance_lock);
+ if (!fs_info->balance_ctl) {
+ spin_unlock(&fs_info->balance_lock);
+ return 0;
+ }
+ spin_unlock(&fs_info->balance_lock);
+
+ if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
+ printk(KERN_INFO "btrfs: force skipping balance\n");
+ return 0;
+ }
+
+ tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance");
+ if (IS_ERR(tsk))
+ return PTR_ERR(tsk);
+
+ return 0;
+}
+
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info)
+{
struct btrfs_balance_control *bctl;
struct btrfs_balance_item *item;
struct btrfs_disk_balance_args disk_bargs;
if (!path)
return -ENOMEM;
- bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
- if (!bctl) {
- ret = -ENOMEM;
- goto out;
- }
-
key.objectid = BTRFS_BALANCE_OBJECTID;
key.type = BTRFS_BALANCE_ITEM_KEY;
key.offset = 0;
- ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
+ ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0);
if (ret < 0)
- goto out_bctl;
+ goto out;
if (ret > 0) { /* ret = -ENOENT; */
ret = 0;
- goto out_bctl;
+ goto out;
+ }
+
+ bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
+ if (!bctl) {
+ ret = -ENOMEM;
+ goto out;
}
leaf = path->nodes[0];
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_balance_item);
- bctl->fs_info = tree_root->fs_info;
- bctl->flags = btrfs_balance_flags(leaf, item) | BTRFS_BALANCE_RESUME;
+ bctl->fs_info = fs_info;
+ bctl->flags = btrfs_balance_flags(leaf, item);
+ bctl->flags |= BTRFS_BALANCE_RESUME;
btrfs_balance_data(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->data, &disk_bargs);
btrfs_balance_sys(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs);
- tsk = kthread_run(balance_kthread, bctl, "btrfs-balance");
- if (IS_ERR(tsk))
- ret = PTR_ERR(tsk);
- else
- goto out;
+ mutex_lock(&fs_info->volume_mutex);
+ mutex_lock(&fs_info->balance_mutex);
-out_bctl:
- kfree(bctl);
+ set_balance_control(bctl);
+
+ mutex_unlock(&fs_info->balance_mutex);
+ mutex_unlock(&fs_info->volume_mutex);
out:
btrfs_free_path(path);
return ret;
BUG_ON(stripe_index >= bbio->num_stripes);
dev = bbio->stripes[stripe_index].dev;
- if (bio->bi_rw & WRITE)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_WRITE_ERRS);
- else
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_READ_ERRS);
- if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_FLUSH_ERRS);
- btrfs_dev_stat_print_on_error(dev);
+ if (dev->bdev) {
+ if (bio->bi_rw & WRITE)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_WRITE_ERRS);
+ else
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_READ_ERRS);
+ if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_FLUSH_ERRS);
+ btrfs_dev_stat_print_on_error(dev);
+ }
}
}
int btrfs_init_new_device(struct btrfs_root *root, char *path);
int btrfs_balance(struct btrfs_balance_control *bctl,
struct btrfs_ioctl_balance_args *bargs);
-int btrfs_recover_balance(struct btrfs_root *tree_root);
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info);
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info);
int btrfs_pause_balance(struct btrfs_fs_info *fs_info);
int btrfs_cancel_balance(struct btrfs_fs_info *fs_info);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
(CONGESTION_ON_THRESH(congestion_kb) - \
(CONGESTION_ON_THRESH(congestion_kb) >> 2))
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+ if (PagePrivate(page))
+ return (void *)page->private;
+ return NULL;
+}
/*
* Dirty a page. Optimistically adjust accounting, on the assumption
{
struct inode *inode;
struct ceph_inode_info *ci;
- struct ceph_snap_context *snapc = (void *)page->private;
+ struct ceph_snap_context *snapc = page_snap_context(page);
BUG_ON(!PageLocked(page));
- BUG_ON(!page->private);
BUG_ON(!PagePrivate(page));
BUG_ON(!page->mapping);
struct inode *inode = page->mapping ? page->mapping->host : NULL;
dout("%p releasepage %p idx %lu\n", inode, page, page->index);
WARN_ON(PageDirty(page));
- WARN_ON(page->private);
WARN_ON(PagePrivate(page));
return 0;
}
osdc = &fsc->client->osdc;
/* verify this is a writeable snap context */
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc == NULL) {
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
oldest = get_oldest_context(inode, &snap_size);
if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
- inode, page, (void *)page->private);
+ inode, page, snapc);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
ceph_put_snap_context(oldest);
clear_bdi_congested(&fsc->backing_dev_info,
BLK_RW_ASYNC);
- ceph_put_snap_context((void *)page->private);
+ ceph_put_snap_context(page_snap_context(page));
page->private = 0;
ClearPagePrivate(page);
dout("unlocking %d %p\n", i, page);
}
/* only if matching snap context */
- pgsnapc = (void *)page->private;
+ pgsnapc = page_snap_context(page);
if (pgsnapc->seq > snapc->seq) {
dout("page snapc %p %lld > oldest %p %lld\n",
pgsnapc, pgsnapc->seq, snapc, snapc->seq);
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
* If yes, we have encountered a double deliminator
* reset the NULL character to the deliminator
*/
- if (tmp_end < end && tmp_end[1] == delim)
+ if (tmp_end < end && tmp_end[1] == delim) {
tmp_end[0] = delim;
- /* Keep iterating until we get to a single deliminator
- * OR the end
- */
- while ((tmp_end = strchr(tmp_end, delim)) != NULL &&
- (tmp_end[1] == delim)) {
- tmp_end = (char *) &tmp_end[2];
- }
+ /* Keep iterating until we get to a single
+ * deliminator OR the end
+ */
+ while ((tmp_end = strchr(tmp_end, delim))
+ != NULL && (tmp_end[1] == delim)) {
+ tmp_end = (char *) &tmp_end[2];
+ }
- /* Reset var options to point to next element */
- if (tmp_end) {
- tmp_end[0] = '\0';
- options = (char *) &tmp_end[1];
- } else
- /* Reached the end of the mount option string */
- options = end;
+ /* Reset var options to point to next element */
+ if (tmp_end) {
+ tmp_end[0] = '\0';
+ options = (char *) &tmp_end[1];
+ } else
+ /* Reached the end of the mount option
+ * string */
+ options = end;
+ }
/* Now build new password string */
temp_len = strlen(value);
* MS-CIFS indicates that servers are only limited by the client's
* bufsize for reads, testing against win98se shows that it throws
* INVALID_PARAMETER errors if you try to request too large a read.
+ * OS/2 just sends back short reads.
*
- * If the server advertises a MaxBufferSize of less than one page,
- * assume that it also can't satisfy reads larger than that either.
- *
- * FIXME: Is there a better heuristic for this?
+ * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+ * it can't handle a read request larger than its MaxBufferSize either.
*/
if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
defsize = CIFS_DEFAULT_IOSIZE;
else if (server->capabilities & CAP_LARGE_READ_X)
defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
- else if (server->maxBuf >= PAGE_CACHE_SIZE)
- defsize = CIFSMaxBufSize;
else
defsize = server->maxBuf - sizeof(READ_RSP);
(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
- if (flags & O_RDONLY) {
+ if ((flags & O_ACCMODE) == O_RDONLY) {
rc = PTR_ERR((*lower_file));
goto out;
}
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
mutex_unlock(&ecryptfs_daemon_hash_mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
goto out_unlock_daemon;
}
daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
+ file->private_data = daemon;
atomic_inc(&ecryptfs_num_miscdev_opens);
out_unlock_daemon:
mutex_unlock(&daemon->mux);
mutex_lock(&ecryptfs_daemon_hash_mux);
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon)
+ daemon = file->private_data;
mutex_lock(&daemon->mux);
- BUG_ON(daemon->pid != task_pid(current));
BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
atomic_dec(&ecryptfs_num_miscdev_opens);
struct ecryptfs_msg_ctx *msg_ctx, u8 msg_type,
u16 msg_flags, struct ecryptfs_daemon *daemon)
{
- int rc = 0;
+ struct ecryptfs_message *msg;
- mutex_lock(&msg_ctx->mux);
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
+ msg = kmalloc((sizeof(*msg) + data_size), GFP_KERNEL);
+ if (!msg) {
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
+ (sizeof(*msg) + data_size));
+ return -ENOMEM;
}
+
+ mutex_lock(&msg_ctx->mux);
+ msg_ctx->msg = msg;
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
memcpy(msg_ctx->msg->data, data, data_size);
msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
+ mutex_unlock(&msg_ctx->mux);
+
+ mutex_lock(&daemon->mux);
daemon->num_queued_msg_ctx++;
wake_up_interruptible(&daemon->wait);
mutex_unlock(&daemon->mux);
-out_unlock:
- mutex_unlock(&msg_ctx->mux);
- return rc;
+
+ return 0;
}
/*
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
+ if (task_pid(current) != daemon->pid) {
+ mutex_unlock(&daemon->mux);
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EPERM;
+ }
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
mutex_unlock(&ecryptfs_daemon_hash_mux);
* message from the queue; try again */
goto check_list;
}
- BUG_ON(euid != daemon->euid);
- BUG_ON(current_user_ns() != daemon->user_ns);
- BUG_ON(task_pid(current) != daemon->pid);
msg_ctx = list_first_entry(&daemon->msg_ctx_out_queue,
struct ecryptfs_msg_ctx, daemon_out_list);
BUG_ON(!msg_ctx);
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
static void nfs4_shutdown_session(struct nfs_client *clp)
{
if (nfs4_has_session(clp)) {
- nfs4_deviceid_purge_client(clp);
nfs4_destroy_session(clp->cl_session);
nfs4_destroy_clientid(clp);
}
dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
+ nfs_release_request(req);
}
nfs_pageio_complete(&desc);
static const struct cred *id_resolver_cache;
static struct key_type key_type_id_resolver_legacy;
+struct idmap {
+ struct rpc_pipe *idmap_pipe;
+ struct key_construction *idmap_key_cons;
+ struct mutex idmap_mutex;
+};
/**
* nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
name, namelen, type, data,
data_size, NULL);
if (ret < 0) {
+ mutex_lock(&idmap->idmap_mutex);
ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
name, namelen, type, data,
data_size, idmap);
+ mutex_unlock(&idmap->idmap_mutex);
}
return ret;
}
/* idmap classic begins here */
module_param(nfs_idmap_cache_timeout, int, 0644);
-struct idmap {
- struct rpc_pipe *idmap_pipe;
- struct key_construction *idmap_key_cons;
-};
-
enum {
Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
};
return error;
}
idmap->idmap_pipe = pipe;
+ mutex_init(&idmap->idmap_mutex);
clp->cl_idmap = idmap;
return 0;
nfsi->delegation_state = 0;
init_rwsem(&nfsi->rwsem);
nfsi->layout = NULL;
- atomic_set(&nfsi->commit_info.rpcs_out, 0);
#endif
}
INIT_LIST_HEAD(&nfsi->commit_info.list);
nfsi->npages = 0;
nfsi->commit_info.ncommit = 0;
+ atomic_set(&nfsi->commit_info.rpcs_out, 0);
atomic_set(&nfsi->silly_count, 1);
INIT_HLIST_HEAD(&nfsi->silly_list);
init_waitqueue_head(&nfsi->waitqueue);
spin_lock(&pnfs_spinlock);
local = find_pnfs_driver_locked(id);
+ if (local != NULL && !try_module_get(local->owner)) {
+ dprintk("%s: Could not grab reference on module\n", __func__);
+ local = NULL;
+ }
spin_unlock(&pnfs_spinlock);
return local;
}
if (nfss->pnfs_curr_ld) {
if (nfss->pnfs_curr_ld->clear_layoutdriver)
nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+ /* Decrement the MDS count. Purge the deviceid cache if zero */
+ if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+ nfs4_deviceid_purge_client(nfss->nfs_client);
module_put(nfss->pnfs_curr_ld->owner);
}
nfss->pnfs_curr_ld = NULL;
goto out_no_driver;
}
}
- if (!try_module_get(ld_type->owner)) {
- dprintk("%s: Could not grab reference on module\n", __func__);
- goto out_no_driver;
- }
server->pnfs_curr_ld = ld_type;
if (ld_type->set_layoutdriver
&& ld_type->set_layoutdriver(server, mntfh)) {
module_put(ld_type->owner);
goto out_no_driver;
}
+ /* Bump the MDS count */
+ atomic_inc(&server->nfs_client->cl_mds_count);
dprintk("%s: pNFS module for %u set\n", __func__, id);
return;
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
stats->ls_gets++;
stats->ls_total += ktime_to_ns(kt);
/* overflow */
- if (unlikely(stats->ls_gets) == 0) {
+ if (unlikely(stats->ls_gets == 0)) {
stats->ls_gets++;
stats->ls_total = ktime_to_ns(kt);
}
static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb,
struct ocfs2_lock_res *lockres)
{
+ unsigned long flags;
+
assert_spin_locked(&lockres->l_lock);
if (lockres->l_flags & OCFS2_LOCK_FREEING) {
lockres_or_flags(lockres, OCFS2_LOCK_QUEUED);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&lockres->l_blocked_list)) {
list_add_tail(&lockres->l_blocked_list,
&osb->blocked_lock_list);
osb->blocked_lock_count++;
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb)
{
unsigned long processed;
+ unsigned long flags;
struct ocfs2_lock_res *lockres;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* grab this early so we know to try again if a state change and
* wake happens part-way through our work */
osb->dc_work_sequence = osb->dc_wake_sequence;
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
osb->blocked_lock_count--;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
BUG_ON(!processed);
processed--;
ocfs2_process_blocked_lock(osb, lockres);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb)
{
int empty = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&osb->blocked_lock_list))
empty = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return empty;
}
static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb)
{
int should_wake = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (osb->dc_work_sequence != osb->dc_wake_sequence)
should_wake = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return should_wake;
}
void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb)
{
- spin_lock(&osb->dc_task_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* make sure the voting thread gets a swipe at whatever changes
* the caller may have made to the voting state */
osb->dc_wake_sequence++;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
wake_up(&osb->dc_event);
}
ocfs2_inode_unlock(inode, 0);
out:
- if (ret && ret != -ENXIO)
- ret = -ENXIO;
return ret;
}
unaligned_dio = 0;
}
- if (unaligned_dio)
+ if (unaligned_dio) {
+ ocfs2_iocb_clear_unaligned_aio(iocb);
atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+ }
out:
if (rw_level != -1)
msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
- if (status)
- mlog_errno(status);
return status;
out_unlock:
ocfs2_unlock_global_qf(oinfo, 0);
{
struct file *file;
struct inode *inode;
- int error;
+ int error, fput_needed;
error = -EBADF;
- file = fget(fd);
+ file = fget_raw_light(fd, &fput_needed);
if (!file)
goto out;
if (!error)
set_fs_pwd(current->fs, &file->f_path);
out_putf:
- fput(file);
+ fput_light(file, fput_needed);
out:
return error;
}
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
* as we can from the end of the buffer.
*/
static void pstore_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- unsigned long size, total = 0;
- char *dst;
+ unsigned long total = 0;
const char *why;
u64 id;
- int hsize, ret;
unsigned int part = 1;
unsigned long flags = 0;
int is_locked = 0;
+ int ret;
why = get_reason_str(reason);
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
+ char *dst;
+ unsigned long size;
+ int hsize;
+ size_t len;
+
dst = psinfo->buf;
hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
size = psinfo->bufsize - hsize;
dst += hsize;
- l2_cpy = min(l2, size);
- l1_cpy = min(l1, size - l2_cpy);
-
- if (l1_cpy + l2_cpy == 0)
+ if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
break;
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
- hsize + l1_cpy + l2_cpy, psinfo);
+ hsize + len, psinfo);
if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
pstore_new_entry = 1;
- l1 -= l1_cpy;
- l2 -= l2_cpy;
- total += l1_cpy + l2_cpy;
+
+ total += hsize + len;
part++;
}
if (in_nmi()) {
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
* Check if we need to grow the arrays holding pages and partial page
* descriptions.
*/
-int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ unsigned int buffers = ACCESS_ONCE(pipe->buffers);
+
+ spd->nr_pages_max = buffers;
+ if (buffers <= PIPE_DEF_BUFFERS)
return 0;
- spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
- spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
+ spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
+ spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
if (spd->pages && spd->partial)
return 0;
return -ENOMEM;
}
-void splice_shrink_spd(struct pipe_inode_info *pipe,
- struct splice_pipe_desc *spd)
+void splice_shrink_spd(struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
return;
kfree(spd->pages);
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- nr_pages = min(req_pages, pipe->buffers);
+ nr_pages = min(req_pages, spd.nr_pages_max);
/*
* Lookup the (hopefully) full range of pages we need.
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return error;
}
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &default_pipe_buf_ops,
.spd_release = spd_release_page,
res = -ENOMEM;
vec = __vec;
- if (pipe->buffers > PIPE_DEF_BUFFERS) {
- vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
+ if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
+ vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
if (!vec)
goto shrink_ret;
}
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {
+ for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
struct page *page;
page = alloc_page(GFP_USER);
shrink_ret:
if (vec != __vec)
kfree(vec);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return res;
err:
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &user_page_pipe_buf_ops,
.spd_release = spd_release_page,
spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
spd.partial, false,
- pipe->buffers);
+ spd.nr_pages_max);
if (spd.nr_pages <= 0)
ret = spd.nr_pages;
else
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
}
struct dentry *dent;
struct ubifs_debug_info *d = c->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
*/
void dbg_debugfs_exit_fs(struct ubifs_info *c)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(c->dbg->dfs_dir);
}
const char *fname;
struct dentry *dent;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
fname = "ubifs";
*/
void dbg_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(dfs_rootdir);
}
}
dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty,
lp->free, lp->flags);
- ubifs_assert(lp->flags | LPROPS_TAKEN);
- ubifs_assert(lp->flags | LPROPS_INDEX);
+ ubifs_assert(lp->flags & LPROPS_TAKEN);
+ ubifs_assert(lp->flags & LPROPS_INDEX);
return lnum;
}
#include <linux/seq_file.h>
#include <linux/bitmap.h>
#include <linux/crc-itu-t.h>
+#include <linux/log2.h>
#include <asm/byteorder.h>
#include "udf_sb.h"
return ret;
}
+static int udf_load_sparable_map(struct super_block *sb,
+ struct udf_part_map *map,
+ struct sparablePartitionMap *spm)
+{
+ uint32_t loc;
+ uint16_t ident;
+ struct sparingTable *st;
+ struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing;
+ int i;
+ struct buffer_head *bh;
+
+ map->s_partition_type = UDF_SPARABLE_MAP15;
+ sdata->s_packet_len = le16_to_cpu(spm->packetLength);
+ if (!is_power_of_2(sdata->s_packet_len)) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Invalid packet length %u\n",
+ (unsigned)sdata->s_packet_len);
+ return -EIO;
+ }
+ if (spm->numSparingTables > 4) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Too many sparing tables (%d)\n",
+ (int)spm->numSparingTables);
+ return -EIO;
+ }
+
+ for (i = 0; i < spm->numSparingTables; i++) {
+ loc = le32_to_cpu(spm->locSparingTable[i]);
+ bh = udf_read_tagged(sb, loc, loc, &ident);
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)bh->b_data;
+ if (ident != 0 ||
+ strncmp(st->sparingIdent.ident, UDF_ID_SPARING,
+ strlen(UDF_ID_SPARING)) ||
+ sizeof(*st) + le16_to_cpu(st->reallocationTableLen) >
+ sb->s_blocksize) {
+ brelse(bh);
+ continue;
+ }
+
+ sdata->s_spar_map[i] = bh;
+ }
+ map->s_partition_func = udf_get_pblock_spar15;
+ return 0;
+}
+
static int udf_load_logicalvol(struct super_block *sb, sector_t block,
struct kernel_lb_addr *fileset)
{
struct logicalVolDesc *lvd;
- int i, j, offset;
+ int i, offset;
uint8_t type;
struct udf_sb_info *sbi = UDF_SB(sb);
struct genericPartitionMap *gpm;
uint16_t ident;
struct buffer_head *bh;
+ unsigned int table_len;
int ret = 0;
bh = udf_read_tagged(sb, block, block, &ident);
return 1;
BUG_ON(ident != TAG_IDENT_LVD);
lvd = (struct logicalVolDesc *)bh->b_data;
-
- i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
- if (i != 0) {
- ret = i;
+ table_len = le32_to_cpu(lvd->mapTableLength);
+ if (sizeof(*lvd) + table_len > sb->s_blocksize) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Partition table too long (%u > %lu)\n", table_len,
+ sb->s_blocksize - sizeof(*lvd));
goto out_bh;
}
+ ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+ if (ret)
+ goto out_bh;
+
for (i = 0, offset = 0;
- i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+ i < sbi->s_partitions && offset < table_len;
i++, offset += gpm->partitionMapLength) {
struct udf_part_map *map = &sbi->s_partmaps[i];
gpm = (struct genericPartitionMap *)
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_SPARABLE,
strlen(UDF_ID_SPARABLE))) {
- uint32_t loc;
- struct sparingTable *st;
- struct sparablePartitionMap *spm =
- (struct sparablePartitionMap *)gpm;
-
- map->s_partition_type = UDF_SPARABLE_MAP15;
- map->s_type_specific.s_sparing.s_packet_len =
- le16_to_cpu(spm->packetLength);
- for (j = 0; j < spm->numSparingTables; j++) {
- struct buffer_head *bh2;
-
- loc = le32_to_cpu(
- spm->locSparingTable[j]);
- bh2 = udf_read_tagged(sb, loc, loc,
- &ident);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = bh2;
-
- if (bh2 == NULL)
- continue;
-
- st = (struct sparingTable *)bh2->b_data;
- if (ident != 0 || strncmp(
- st->sparingIdent.ident,
- UDF_ID_SPARING,
- strlen(UDF_ID_SPARING))) {
- brelse(bh2);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = NULL;
- }
- }
- map->s_partition_func = udf_get_pblock_spar15;
+ if (udf_load_sparable_map(sb, map,
+ (struct sparablePartitionMap *)gpm) < 0)
+ goto out_bh;
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_METADATA,
strlen(UDF_ID_METADATA))) {
goto restart;
}
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
DECLARE_COMPLETION_ONSTACK(done);
args->done = &done;
- INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+ INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
wait_for_completion(&done);
return args->result;
imap_valid = 0;
}
} else {
- if (PageUptodate(page)) {
+ if (PageUptodate(page))
ASSERT(buffer_mapped(bh));
- imap_valid = 0;
- }
+ /*
+ * This buffer is not uptodate and will not be
+ * written to disk. Ensure that we will put any
+ * subsequent writeable buffers into a new
+ * ioend.
+ */
+ imap_valid = 0;
continue;
}
bp->b_length = numblks;
bp->b_io_length = numblks;
bp->b_flags = flags;
-
- /*
- * We do not set the block number here in the buffer because we have not
- * finished initialising the buffer. We insert the buffer into the cache
- * in this state, so this ensures that we are unable to do IO on a
- * buffer that hasn't been fully initialised.
- */
- bp->b_bn = XFS_BUF_DADDR_NULL;
+ bp->b_bn = blkno;
atomic_set(&bp->b_pin_count, 0);
init_waitqueue_head(&bp->b_waiters);
if (bp != new_bp)
xfs_buf_free(new_bp);
- /*
- * Now we have a workable buffer, fill in the block number so
- * that we can do IO on it.
- */
- bp->b_bn = blkno;
bp->b_io_length = bp->b_length;
found:
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_alloc(target, 0, numblks, 0);
+ bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
if (unlikely(bp == NULL))
goto fail;
goto out_unlock;
}
+ /*
+ * Stale inode items should force out the iclog.
+ */
+ if (ip->i_flags & XFS_ISTALE) {
+ rval = XFS_ITEM_PINNED;
+ goto out_unlock;
+ }
+
/*
* Someone else is already flushing the inode. Nothing we can do
* here but wait for the flush to finish and remove the item from
goto out_unlock;
}
- /*
- * Stale inode items should force out the iclog.
- */
- if (ip->i_flags & XFS_ISTALE) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return XFS_ITEM_PINNED;
- }
-
ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
-STATIC int xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
- xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+ struct xlog *log,
+ struct xlog_ticket *ticket,
+ struct xlog_in_core **iclog,
+ xfs_lsn_t *commitlsnp);
+
STATIC xlog_t * xlog_alloc_log(xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
-STATIC int xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+ struct xlog *log,
+ atomic64_t *head);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
STATIC void xlog_dealloc_log(xlog_t *log);
int eventual_size);
STATIC void xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_grant_push_ail(struct log *log,
- int need_bytes);
+STATIC void
+xlog_grant_push_ail(
+ struct xlog *log,
+ int need_bytes);
STATIC void xlog_regrant_reserve_log_space(xlog_t *log,
xlog_ticket_t *ticket);
STATIC void xlog_ungrant_log_space(xlog_t *log,
#if defined(DEBUG)
STATIC void xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+ struct xlog *log);
STATIC void xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
int count, boolean_t syncing);
STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
static void
xlog_grant_sub_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static void
xlog_grant_add_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static inline int
xlog_ticket_reservation(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
STATIC bool
xlog_grant_head_wake(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
STATIC int
xlog_grant_head_wait(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes)
*/
STATIC int
xlog_grant_head_check(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
bool permanent,
uint t_type)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
struct xlog_in_core **iclog,
uint flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
void
xfs_log_unmount(xfs_mount_t *mp)
{
+ cancel_delayed_work_sync(&mp->m_sync_work);
xfs_trans_ail_destroy(mp);
xlog_dealloc_log(mp->m_log);
}
xfs_log_space_wake(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
*/
STATIC int
xlog_space_left(
- struct log *log,
+ struct xlog *log,
atomic64_t *head)
{
int free_bytes;
*/
STATIC int
xlog_commit_record(
- struct log *log,
+ struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
*/
STATIC void
xlog_grant_push_ail(
- struct log *log,
+ struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
static xlog_op_header_t *
xlog_write_setup_ophdr(
- struct log *log,
+ struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
static int
xlog_write_copy_finish(
- struct log *log,
+ struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
*/
int
xlog_write(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
*/
xlog_ticket_t *
xlog_ticket_alloc(
- struct log *log,
+ struct xlog *log,
int unit_bytes,
int cnt,
char client,
*/
void
xlog_verify_dest_ptr(
- struct log *log,
+ struct xlog *log,
char *ptr)
{
int i;
*/
STATIC void
xlog_verify_grant_tail(
- struct log *log)
+ struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
*/
static struct xlog_ticket *
xlog_cil_ticket_alloc(
- struct log *log)
+ struct xlog *log)
{
struct xlog_ticket *tic;
*/
void
xlog_cil_init_post_recovery(
- struct log *log)
+ struct xlog *log)
{
log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
log->l_cilp->xc_ctx->sequence = 1;
*/
STATIC void
xfs_cil_prepare_item(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *lv,
int *len,
int *diff_iovecs)
*/
static void
xlog_cil_insert_items(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket)
{
*/
STATIC int
xlog_cil_push(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
struct xfs_log_vec *lv;
*/
static void
xlog_cil_push_background(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
static void
xlog_cil_push_foreground(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t push_seq)
{
struct xfs_cil *cil = log->l_cilp;
xfs_lsn_t *commit_lsn,
int flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int log_flags = 0;
struct xfs_log_vec *log_vector;
*/
xfs_lsn_t
xlog_cil_force_lsn(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t sequence)
{
struct xfs_cil *cil = log->l_cilp;
*/
int
xlog_cil_init(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil;
struct xfs_cil_ctx *ctx;
void
xlog_cil_destroy(
- struct log *log)
+ struct xlog *log)
{
if (log->l_cilp->xc_ctx) {
if (log->l_cilp->xc_ctx->ticket)
#define __XFS_LOG_PRIV_H__
struct xfs_buf;
-struct log;
+struct xlog;
struct xlog_ticket;
struct xfs_mount;
struct xlog_in_core *ic_next;
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
- struct log *ic_log;
+ struct xlog *ic_log;
int ic_size;
int ic_offset;
int ic_bwritecnt;
* operations almost as efficient as the old logging methods.
*/
struct xfs_cil {
- struct log *xc_log;
+ struct xlog *xc_log;
struct list_head xc_cil;
spinlock_t xc_cil_lock;
struct xfs_cil_ctx *xc_ctx;
* overflow 31 bits worth of byte offset, so using a byte number will mean
* that round off problems won't occur when releasing partial reservations.
*/
-typedef struct log {
+typedef struct xlog {
/* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_ail *l_ailp; /* AIL log is working with */
extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
- int count, char client, bool permanent,
- xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+ struct xlog *log,
+ int unit_bytes,
+ int count,
+ char client,
+ bool permanent,
+ xfs_km_flags_t alloc_flags);
static inline void
}
void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int xlog_write(struct log *log, struct xfs_log_vec *log_vector,
- struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
- xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+ struct xlog *log,
+ struct xfs_log_vec *log_vector,
+ struct xlog_ticket *tic,
+ xfs_lsn_t *start_lsn,
+ struct xlog_in_core **commit_iclog,
+ uint flags);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
/*
* Committed Item List interfaces
*/
-int xlog_cil_init(struct log *log);
-void xlog_cil_init_post_recovery(struct log *log);
-void xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
/*
* CIL force routines
*/
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+ struct xlog *log,
+ xfs_lsn_t sequence);
static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
{
xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
}
STATIC int
xlog_recover_add_to_cont_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_add_to_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_reorder_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
*/
STATIC int
xlog_recover_buffer_pass1(
- struct log *log,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
*/
STATIC int
xlog_check_buffer_cancelled(
- struct log *log,
+ struct xlog *log,
xfs_daddr_t blkno,
uint len,
ushort flags)
STATIC int
xlog_recover_commit_pass1(
- struct log *log,
- struct xlog_recover *trans,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
STATIC int
xlog_recover_commit_pass2(
- struct log *log,
- struct xlog_recover *trans,
- struct list_head *buffer_list,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct list_head *buffer_list,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
*/
STATIC int
xlog_recover_commit_trans(
- struct log *log,
+ struct xlog *log,
struct xlog_recover *trans,
int pass)
{
STATIC int
xlog_recover_unmount_trans(
- struct log *log,
- xlog_recover_t *trans)
+ struct xlog *log,
+ struct xlog_recover *trans)
{
/* Do nothing now */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
#include "xfs_sync.h"
-struct log;
+struct xlog;
struct xfs_mount_args;
struct xfs_inode;
struct xfs_bmbt_irec;
uint m_readio_blocks; /* min read size blocks */
uint m_writeio_log; /* min write size log bytes */
uint m_writeio_blocks; /* min write size blocks */
- struct log *m_log; /* log specific stuff */
+ struct xlog *m_log; /* log specific stuff */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
* We shouldn't write/force the log if we are in the mount/unmount
* process or on a read only filesystem. The workqueue still needs to be
* active in both cases, however, because it is used for inode reclaim
- * during these times. Use the s_umount semaphore to provide exclusion
- * with unmount.
+ * during these times. Use the MS_ACTIVE flag to avoid doing anything
+ * during mount. Doing work during unmount is avoided by calling
+ * cancel_delayed_work_sync on this work queue before tearing down
+ * the ail and the log in xfs_log_unmount.
*/
- if (down_read_trylock(&mp->m_super->s_umount)) {
- if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
- /* dgc: errors ignored here */
- if (mp->m_super->s_frozen == SB_UNFROZEN &&
- xfs_log_need_covered(mp))
- error = xfs_fs_log_dummy(mp);
- else
- xfs_log_force(mp, 0);
-
- /* start pushing all the metadata that is currently
- * dirty */
- xfs_ail_push_all(mp->m_ail);
- }
- up_read(&mp->m_super->s_umount);
+ if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+ !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ /* dgc: errors ignored here */
+ if (mp->m_super->s_frozen == SB_UNFROZEN &&
+ xfs_log_need_covered(mp))
+ error = xfs_fs_log_dummy(mp);
+ else
+ xfs_log_force(mp, 0);
+
+ /* start pushing all the metadata that is currently
+ * dirty */
+ xfs_ail_push_all(mp->m_ail);
}
/* queue us up again */
struct xfs_dquot;
struct xfs_log_item;
struct xlog_ticket;
-struct log;
+struct xlog;
struct xlog_recover;
struct xlog_recover_item;
struct xfs_buf_log_format;
DEFINE_DQUOT_EVENT(xfs_dqflush_done);
DECLARE_EVENT_CLASS(xfs_loggrant_class,
- TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
TP_ARGS(log, tic),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOGGRANT_EVENT(name) \
DEFINE_EVENT(xfs_loggrant_class, name, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
- TP_PROTO(struct log *log, struct xlog_recover *trans,
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans,
struct xlog_recover_item *item, int pass),
TP_ARGS(log, trans, item, pass),
TP_STRUCT__entry(
#define DEFINE_LOG_RECOVER_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_item_class, name, \
- TP_PROTO(struct log *log, struct xlog_recover *trans, \
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
struct xlog_recover_item *item, int pass), \
TP_ARGS(log, trans, item, pass))
DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
TP_ARGS(log, buf_f),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
TP_ARGS(log, buf_f))
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
TP_ARGS(log, in_f),
TP_STRUCT__entry(
__field(dev_t, dev)
)
#define DEFINE_LOG_RECOVER_INO_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
TP_ARGS(log, in_f))
DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
#include <linux/compiler.h>
+#ifdef CONFIG_GENERIC_BUG
+#define BUGFLAG_WARNING (1 << 0)
+#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
#ifdef CONFIG_BUG
#ifdef CONFIG_GENERIC_BUG
-#ifndef __ASSEMBLY__
struct bug_entry {
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
unsigned long bug_addr;
#endif
unsigned short flags;
};
-#endif /* __ASSEMBLY__ */
-
-#define BUGFLAG_WARNING (1 << 0)
-#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
-#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
-
#endif /* CONFIG_GENERIC_BUG */
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-
/*
* Don't use BUG() or BUG_ON() unless there's really no way out; one
* example might be detecting data structure corruption in the middle
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
-/*
- This file is auto-generated from the drm_pciids.txt in the DRM CVS
- Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
(x)->ki_dtor = NULL; \
(x)->ki_obj.tsk = tsk; \
(x)->ki_user_data = 0; \
+ (x)->private = NULL; \
} while (0)
#define AIO_RING_MAGIC 0xa10a10a1
extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
extern void blk_unprep_request(struct request *);
/*
*/
#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
!defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline inline __attribute__((always_inline))
-# define __inline__ __inline__ __attribute__((always_inline))
-# define __inline __inline __attribute__((always_inline))
+# define inline inline __attribute__((always_inline)) notrace
+# define __inline__ __inline__ __attribute__((always_inline)) notrace
+# define __inline __inline __attribute__((always_inline)) notrace
#else
/* A lot of inline functions can cause havoc with function tracing */
# define inline inline notrace
/**
* EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
*
* The ioctl buffer argument should be binary equivalent to
*
* @irq_pm_shutdown: function called from core code on shutdown once per chip
* @irq_print_chip: optional to print special chip info in show_interrupts
* @flags: chip specific flags
- *
- * @release: release function solely used by UML
*/
struct irq_chip {
const char *name;
* is passed to the kernel.
*/
enum kmsg_dump_reason {
+ KMSG_DUMP_UNDEF,
KMSG_DUMP_PANIC,
KMSG_DUMP_OOPS,
KMSG_DUMP_EMERG,
/**
* struct kmsg_dumper - kernel crash message dumper structure
- * @dump: The callback which gets called on crashes. The buffer is passed
- * as two sections, where s1 (length l1) contains the older
- * messages and s2 (length l2) contains the newer.
* @list: Entry in the dumper list (private)
+ * @dump: Call into dumping code which will retrieve the data with
+ * through the record iterator
+ * @max_reason: filter for highest reason number that should be dumped
* @registered: Flag that specifies if this is already registered
*/
struct kmsg_dumper {
- void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2);
struct list_head list;
- int registered;
+ void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+ enum kmsg_dump_reason max_reason;
+ bool active;
+ bool registered;
+
+ /* private state of the kmsg iterator */
+ u32 cur_idx;
+ u32 next_idx;
+ u64 cur_seq;
+ u64 next_seq;
};
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
int kmsg_dump_register(struct kmsg_dumper *dumper);
int kmsg_dump_unregister(struct kmsg_dumper *dumper);
{
}
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ const char *line, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
{
return -EINVAL;
#ifdef CONFIG_HAVE_KVM_EVENTFD
void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
void kvm_irqfd_release(struct kvm *kvm);
void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
static inline void kvm_eventfd_init(struct kvm *kvm) {}
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
return -EINVAL;
}
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
* SDHCI declarations specific to ST SPEAr platform
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
*/
struct nfs_client {
atomic_t cl_count;
+ atomic_t cl_mds_count;
int cl_cons_state; /* current construction state (-ve: init error) */
#define NFS_CS_READY 0 /* ready to be used */
#define NFS_CS_INITING 1 /* busy initialising */
* Arasan Compact Flash host controller platform data header file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Changing LSM security domain is considered a new privilege. So, for example,
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
*/
#define PR_SET_NO_NEW_PRIVS 38
#define PR_GET_NO_NEW_PRIVS 39
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
+ PXA3xx_SSP,
PXA168_SSP,
+ PXA910_SSP,
CE4100_SSP,
};
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
/* The feature bitmap for virtio rpmsg */
#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
*/
struct rpmsg_endpoint {
struct rpmsg_channel *rpdev;
+ struct kref refcount;
rpmsg_rx_cb_t cb;
+ struct mutex cb_lock;
u32 addr;
void *priv;
};
/* device driver is going to provide hardware time stamp */
SKBTX_IN_PROGRESS = 1 << 2,
- /* ensure the originating sk reference is available on driver level */
- SKBTX_DRV_NEEDS_SK_REF = 1 << 3,
-
/* device driver supports TX zero-copy buffers */
- SKBTX_DEV_ZEROCOPY = 1 << 4,
+ SKBTX_DEV_ZEROCOPY = 1 << 3,
/* generate wifi status information (where possible) */
- SKBTX_WIFI_STATUS = 1 << 5,
+ SKBTX_WIFI_STATUS = 1 << 4,
};
/*
void (*cs_control)(u32 command);
};
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <linux/clk.h>
#include <mach/dma.h>
struct splice_pipe_desc {
struct page **pages; /* page map */
struct partial_page *partial; /* pages[] may not be contig */
- int nr_pages; /* number of pages in map */
+ int nr_pages; /* number of populated pages in map */
+ unsigned int nr_pages_max; /* pages[] & partial[] arrays size */
unsigned int flags; /* splice flags */
const struct pipe_buf_operations *ops;/* ops associated with output pipe */
void (*spd_release)(struct splice_pipe_desc *, unsigned int);
/*
* for dynamic pipe sizing
*/
-extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct pipe_inode_info *,
- struct splice_pipe_desc *);
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*/
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
#include <linux/fb.h>
struct pci_dev;
#endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
/* Experimental, these three ioctls may change over the next couple of kernel
versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
__u8 data[240];
} __packed;
+#define HCI_EV_KEY_REFRESH_COMPLETE 0x30
+struct hci_ev_key_refresh_complete {
+ __u8 status;
+ __le16 handle;
+} __packed;
+
#define HCI_EV_IO_CAPA_REQUEST 0x31
struct hci_ev_io_capa_request {
bdaddr_t bdaddr;
* to also unregister the device. If it returns 1, then mac80211
* will also go through the regular complete restart on resume.
*
+ * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is
+ * modified. The reason is that device_set_wakeup_enable() is
+ * supposed to be called when the configuration changes, not only
+ * in suspend().
+ *
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
* and @stop must be implemented.
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @band: the band to calculate the frame duration on
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Is this structure kfree()able? */
malloced:1;
+ /* Has this transport moved the ctsn since we last sacked */
+ __u32 sack_generation;
+
struct flowi fl;
/* This is the peer's IP address and port. */
*/
__u8 sack_needed; /* Do we need to sack the peer? */
__u32 sack_cnt;
+ __u32 sack_generation;
/* These are capabilities which our peer advertised. */
__u8 ecn_capable:1, /* Can peer do ECN? */
int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn,
+ struct sctp_transport *trans);
/* Mark this TSN and all lower as seen. */
void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
struct snd_tea575x {
struct v4l2_device *v4l2_dev;
+ struct v4l2_file_operations fops;
struct video_device vd; /* video device */
int radio_nr; /* radio_nr */
bool tea5759; /* 5759 chip is present */
int (*ext_init)(struct snd_tea575x *tea);
};
-int snd_tea575x_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
void snd_tea575x_exit(struct snd_tea575x *tea);
#endif /* __SOUND_TEA575X_TUNER_H */
EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
+static int css_unbias_refcnt(int refcnt)
+{
+ return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
/* the current nr of refs, always >= 0 whether @css is deactivated or not */
static int css_refcnt(struct cgroup_subsys_state *css)
{
int v = atomic_read(&css->refcnt);
- return v >= 0 ? v : v - CSS_DEACT_BIAS;
+ return css_unbias_refcnt(v);
}
/* convenient tests for these bits */
mutex_unlock(&cgroup_mutex);
/*
- * We want to drop the active superblock reference from the
- * cgroup creation after all the dentry refs are gone -
- * kill_sb gets mighty unhappy otherwise. Mark
- * dentry->d_fsdata with cgroup_diput() to tell
- * cgroup_d_release() to call deactivate_super().
+ * Drop the active superblock reference that we took when we
+ * created the cgroup
*/
- dentry->d_fsdata = cgroup_diput;
+ deactivate_super(cgrp->root->sb);
/*
* if we're getting rid of the cgroup, refcount should ensure
return 1;
}
-static void cgroup_d_release(struct dentry *dentry)
-{
- /* did cgroup_diput() tell me to deactivate super? */
- if (dentry->d_fsdata == cgroup_diput)
- deactivate_super(dentry->d_sb);
-}
-
static void remove_dir(struct dentry *d)
{
struct dentry *parent = dget(d->d_parent);
static const struct dentry_operations cgroup_dops = {
.d_iput = cgroup_diput,
.d_delete = cgroup_delete,
- .d_release = cgroup_d_release,
};
struct inode *inode =
{
struct cgroup_subsys_state *css =
container_of(work, struct cgroup_subsys_state, dput_work);
+ struct dentry *dentry = css->cgroup->dentry;
+ struct super_block *sb = dentry->d_sb;
- dput(css->cgroup->dentry);
+ atomic_inc(&sb->s_active);
+ dput(dentry);
+ deactivate_super(sb);
}
static void init_cgroup_css(struct cgroup_subsys_state *css,
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int v;
rcu_read_lock();
- atomic_dec(&css->refcnt);
- switch (css_refcnt(css)) {
+ v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+ switch (v) {
case 1:
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
return !event->cgrp || event->cgrp == cpuctx->cgrp;
}
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
{
- css_get(&event->cgrp->css);
+ return css_tryget(&event->cgrp->css);
}
static inline void perf_put_cgroup(struct perf_event *event)
event->cgrp = cgrp;
/* must be done before we fput() the file */
- perf_get_cgroup(event);
+ if (!perf_tryget_cgroup(event)) {
+ event->cgrp = NULL;
+ ret = -ENOENT;
+ goto out;
+ }
/*
* all events in a group must monitor
list_del_rcu(&p->tasks);
list_del_init(&p->sibling);
__this_cpu_dec(process_counts);
+ /*
+ * If we are the last child process in a pid namespace to be
+ * reaped, notify the reaper sleeping zap_pid_ns_processes().
+ */
+ if (IS_ENABLED(CONFIG_PID_NS)) {
+ struct task_struct *parent = p->real_parent;
+
+ if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+ list_empty(&parent->children) &&
+ (parent->flags & PF_EXITING))
+ wake_up_process(parent);
+ }
}
list_del_rcu(&p->thread_group);
}
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
- /*
- * We can not clear ->child_reaper or leave it alone.
- * There may by stealth EXIT_DEAD tasks on ->children,
- * forget_original_parent() must move them somewhere.
- */
- pid_ns->child_reaper = init_pid_ns.child_reaper;
} else if (father->signal->has_child_subreaper) {
struct task_struct *reaper;
}
read_unlock(&tasklist_lock);
+ /* Firstly reap the EXIT_ZOMBIE children we may have. */
do {
clear_thread_flag(TIF_SIGPENDING);
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
+ /*
+ * sys_wait4() above can't reap the TASK_DEAD children.
+ * Make sure they all go away, see __unhash_process().
+ */
+ for (;;) {
+ bool need_wait = false;
+
+ read_lock(&tasklist_lock);
+ if (!list_empty(¤t->children)) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ need_wait = true;
+ }
+ read_unlock(&tasklist_lock);
+
+ if (!need_wait)
+ break;
+ schedule();
+ }
+
if (pid_ns->reboot)
current->signal->group_exit_code = pid_ns->reboot;
* separated by ',', and find the message after the ';' character.
*/
+enum log_flags {
+ LOG_DEFAULT = 0,
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+};
+
struct log {
u64 ts_nsec; /* timestamp in nanoseconds */
u16 len; /* length of entire record */
u16 text_len; /* length of text buffer */
u16 dict_len; /* length of dictionary buffer */
- u16 level; /* syslog level + facility */
+ u8 facility; /* syslog facility */
+ u8 flags:5; /* internal record flags */
+ u8 level:3; /* syslog level */
};
/*
#define LOG_LINE_MAX 1024
/* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
#define LOG_ALIGN 4
#else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
#endif
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
/* insert record into the buffer, discard old ones, update heads */
static void log_store(int facility, int level,
+ enum log_flags flags, u64 ts_nsec,
const char *dict, u16 dict_len,
const char *text, u16 text_len)
{
msg->text_len = text_len;
memcpy(log_dict(msg), dict, dict_len);
msg->dict_len = dict_len;
- msg->level = (facility << 3) | (level & 7);
- msg->ts_nsec = local_clock();
+ msg->facility = facility;
+ msg->level = level & 7;
+ msg->flags = flags & 0x1f;
+ if (ts_nsec > 0)
+ msg->ts_nsec = ts_nsec;
+ else
+ msg->ts_nsec = local_clock();
memset(log_dict(msg) + dict_len, 0, pad_len);
msg->len = sizeof(struct log) + text_len + dict_len + pad_len;
if (!user)
return -EBADF;
- mutex_lock(&user->lock);
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ts_usec = msg->ts_nsec;
do_div(ts_usec, 1000);
len = sprintf(user->buf, "%u,%llu,%llu;",
- msg->level, user->seq, ts_usec);
+ (msg->facility << 3) | msg->level, user->seq, ts_usec);
/* escape non-printable characters */
for (i = 0; i < msg->text_len; i++) {
#endif
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+static size_t print_time(u64 ts, char *buf)
+{
+ unsigned long rem_nsec;
+
+ if (!printk_time)
+ return 0;
+
+ if (!buf)
+ return 15;
+
+ rem_nsec = do_div(ts, 1000000000);
+ return sprintf(buf, "[%5lu.%06lu] ",
+ (unsigned long)ts, rem_nsec / 1000);
+}
+
static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
{
size_t len = 0;
}
}
- if (printk_time) {
- if (buf) {
- unsigned long long ts = msg->ts_nsec;
- unsigned long rem_nsec = do_div(ts, 1000000000);
-
- len += sprintf(buf + len, "[%5lu.%06lu] ",
- (unsigned long) ts, rem_nsec / 1000);
- } else {
- len += 15;
- }
- }
-
+ len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
return len;
}
{
char *text;
struct log *msg;
- int len;
+ int len = 0;
text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
if (!text)
return -ENOMEM;
- raw_spin_lock_irq(&logbuf_lock);
- if (syslog_seq < log_first_seq) {
- /* messages are gone, move to first one */
- syslog_seq = log_first_seq;
- syslog_idx = log_first_idx;
- }
- msg = log_from_idx(syslog_idx);
- len = msg_print_text(msg, true, text, LOG_LINE_MAX);
- syslog_idx = log_next(syslog_idx);
- syslog_seq++;
- raw_spin_unlock_irq(&logbuf_lock);
+ while (size > 0) {
+ size_t n;
+
+ raw_spin_lock_irq(&logbuf_lock);
+ if (syslog_seq < log_first_seq) {
+ /* messages are gone, move to first one */
+ syslog_seq = log_first_seq;
+ syslog_idx = log_first_idx;
+ }
+ if (syslog_seq == log_next_seq) {
+ raw_spin_unlock_irq(&logbuf_lock);
+ break;
+ }
+ msg = log_from_idx(syslog_idx);
+ n = msg_print_text(msg, true, text, LOG_LINE_MAX);
+ if (n <= size) {
+ syslog_idx = log_next(syslog_idx);
+ syslog_seq++;
+ } else
+ n = 0;
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ if (!n)
+ break;
+
+ len += n;
+ size -= n;
+ buf += n;
+ n = copy_to_user(buf - n, text, n);
- if (len > 0 && copy_to_user(buf, text, len))
- len = -EFAULT;
+ if (n) {
+ len -= n;
+ if (!len)
+ len = -EFAULT;
+ break;
+ }
+ }
kfree(text);
return len;
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
- */
+ */
seq = clear_seq;
idx = clear_idx;
while (seq < log_next_seq) {
idx = log_next(idx);
seq++;
}
+
+ /* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
while (len > size && seq < log_next_seq) {
seq++;
}
- /* last message in this dump */
+ /* last message fitting into this dump */
next_seq = log_next_seq;
len = 0;
{
bool clear = false;
static int saved_console_loglevel = -1;
+ static DEFINE_MUTEX(syslog_mutex);
int error;
error = check_syslog_permissions(type, from_file);
error = -EFAULT;
goto out;
}
+ error = mutex_lock_interruptible(&syslog_mutex);
+ if (error)
+ goto out;
error = wait_event_interruptible(log_wait,
syslog_seq != log_next_seq);
- if (error)
+ if (error) {
+ mutex_unlock(&syslog_mutex);
goto out;
+ }
error = syslog_print(buf, len);
+ mutex_unlock(&syslog_mutex);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
/* Clear ring buffer */
case SYSLOG_ACTION_CLEAR:
syslog_print_all(NULL, 0, true);
+ break;
/* Disable logging to console */
case SYSLOG_ACTION_CONSOLE_OFF:
if (saved_console_loglevel == -1)
}
}
+/*
+ * Continuation lines are buffered, and not committed to the record buffer
+ * until the line is complete, or a race forces it. The line fragments
+ * though, are printed immediately to the consoles to ensure everything has
+ * reached the console in case of a kernel crash.
+ */
+static struct cont {
+ char buf[LOG_LINE_MAX];
+ size_t len; /* length == 0 means unused buffer */
+ size_t cons; /* bytes written to console */
+ struct task_struct *owner; /* task of first print*/
+ u64 ts_nsec; /* time of first print */
+ u8 level; /* log level of first message */
+ u8 facility; /* log level of first message */
+ bool flushed:1; /* buffer sealed and committed */
+} cont;
+
+static void cont_flush(void)
+{
+ if (cont.flushed)
+ return;
+ if (cont.len == 0)
+ return;
+
+ log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec,
+ NULL, 0, cont.buf, cont.len);
+
+ cont.flushed = true;
+}
+
+static bool cont_add(int facility, int level, const char *text, size_t len)
+{
+ if (cont.len && cont.flushed)
+ return false;
+
+ if (cont.len + len > sizeof(cont.buf)) {
+ cont_flush();
+ return false;
+ }
+
+ if (!cont.len) {
+ cont.facility = facility;
+ cont.level = level;
+ cont.owner = current;
+ cont.ts_nsec = local_clock();
+ cont.cons = 0;
+ cont.flushed = false;
+ }
+
+ memcpy(cont.buf + cont.len, text, len);
+ cont.len += len;
+ return true;
+}
+
+static size_t cont_print_text(char *text, size_t size)
+{
+ size_t textlen = 0;
+ size_t len;
+
+ if (cont.cons == 0) {
+ textlen += print_time(cont.ts_nsec, text);
+ size -= textlen;
+ }
+
+ len = cont.len - cont.cons;
+ if (len > 0) {
+ if (len+1 > size)
+ len = size-1;
+ memcpy(text + textlen, cont.buf + cont.cons, len);
+ textlen += len;
+ cont.cons = cont.len;
+ }
+
+ if (cont.flushed) {
+ text[textlen++] = '\n';
+ /* got everything, release buffer */
+ cont.len = 0;
+ }
+ return textlen;
+}
+
asmlinkage int vprintk_emit(int facility, int level,
const char *dict, size_t dictlen,
const char *fmt, va_list args)
{
static int recursion_bug;
- static char cont_buf[LOG_LINE_MAX];
- static size_t cont_len;
- static int cont_level;
- static struct task_struct *cont_task;
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
size_t text_len;
recursion_bug = 0;
printed_len += strlen(recursion_msg);
/* emit KERN_CRIT message */
- log_store(0, 2, NULL, 0, recursion_msg, printed_len);
+ log_store(0, 2, LOG_DEFAULT, 0,
+ NULL, 0, recursion_msg, printed_len);
}
/*
}
if (!newline) {
- if (cont_len && (prefix || cont_task != current)) {
- /*
- * Flush earlier buffer, which is either from a
- * different thread, or when we got a new prefix.
- */
- log_store(facility, cont_level, NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
-
- if (!cont_len) {
- cont_level = level;
- cont_task = current;
- }
+ /*
+ * Flush the conflicting buffer. An earlier newline was missing,
+ * or another task also prints continuation lines.
+ */
+ if (cont.len && (prefix || cont.owner != current))
+ cont_flush();
- /* buffer or append to earlier buffer from the same thread */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
+ /* buffer line if possible, otherwise store it right away */
+ if (!cont_add(facility, level, text, text_len))
+ log_store(facility, level, LOG_DEFAULT, 0,
+ dict, dictlen, text, text_len);
} else {
- if (cont_len && cont_task == current) {
- if (prefix) {
- /*
- * New prefix from the same thread; flush. We
- * either got no earlier newline, or we race
- * with an interrupt.
- */
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- }
+ bool stored = false;
- /* append to the earlier buffer and flush */
- if (cont_len + text_len > sizeof(cont_buf))
- text_len = sizeof(cont_buf) - cont_len;
- memcpy(cont_buf + cont_len, text, text_len);
- cont_len += text_len;
- log_store(facility, cont_level,
- NULL, 0, cont_buf, cont_len);
- cont_len = 0;
- cont_task = NULL;
- printed_len = cont_len;
- } else {
- /* ordinary single and terminated line */
- log_store(facility, level,
- dict, dictlen, text, text_len);
- printed_len = text_len;
+ /*
+ * If an earlier newline was missing and it was the same task,
+ * either merge it with the current buffer and flush, or if
+ * there was a race with interrupts (prefix == true) then just
+ * flush it out and store this line separately.
+ */
+ if (cont.len && cont.owner == current) {
+ if (!prefix)
+ stored = cont_add(facility, level, text, text_len);
+ cont_flush();
}
+
+ if (!stored)
+ log_store(facility, level, LOG_DEFAULT, 0,
+ dict, dictlen, text, text_len);
}
+ printed_len += text_len;
/*
* Try to acquire and then immediately release the console semaphore.
#else
#define LOG_LINE_MAX 0
+static struct cont {
+ size_t len;
+ size_t cons;
+ u8 level;
+ bool flushed:1;
+} cont;
static struct log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
static void call_console_drivers(int level, const char *text, size_t len) {}
static size_t msg_print_text(const struct log *msg, bool syslog,
char *buf, size_t size) { return 0; }
+static size_t cont_print_text(char *text, size_t size) { return 0; }
#endif /* CONFIG_PRINTK */
*/
void console_unlock(void)
{
+ static char text[LOG_LINE_MAX];
static u64 seen_seq;
unsigned long flags;
bool wake_klogd = false;
console_may_schedule = 0;
+ /* flush buffered message fragment immediately to console */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (cont.len && (cont.cons < cont.len || cont.flushed)) {
+ size_t len;
+
+ len = cont_print_text(text, sizeof(text));
+ raw_spin_unlock(&logbuf_lock);
+ stop_critical_timings();
+ call_console_drivers(cont.level, text, len);
+ start_critical_timings();
+ local_irq_restore(flags);
+ } else
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
again:
for (;;) {
struct log *msg;
- static char text[LOG_LINE_MAX];
size_t len;
int level;
console_seq = log_first_seq;
console_idx = log_first_idx;
}
-
+skip:
if (console_seq == log_next_seq)
break;
msg = log_from_idx(console_idx);
- level = msg->level & 7;
+ if (msg->flags & LOG_NOCONS) {
+ /*
+ * Skip record we have buffered and already printed
+ * directly to the console when we received it.
+ */
+ console_idx = log_next(console_idx);
+ console_seq++;
+ goto skip;
+ }
+ level = msg->level;
len = msg_print_text(msg, false, text, sizeof(text));
console_idx = log_next(console_idx);
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
- u64 idx;
struct kmsg_dumper *dumper;
- const char *s1, *s2;
- unsigned long l1, l2;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
- /* Theoretically, the log could move on after we do this, but
- there's not a lot we can do about that. The new messages
- will overwrite the start of what we dump. */
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
+ rcu_read_unlock();
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ struct log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
raw_spin_lock_irqsave(&logbuf_lock, flags);
- if (syslog_seq < log_first_seq)
- idx = syslog_idx;
- else
- idx = log_first_idx;
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
- if (idx > log_next_idx) {
- s1 = log_buf;
- l1 = log_next_idx;
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
- s2 = log_buf + idx;
- l2 = log_buf_len - idx;
- } else {
- s1 = "";
- l1 = 0;
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, syslog,
+ line, size);
- s2 = log_buf + idx;
- l2 = log_next_idx - idx;
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @buf: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
}
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
+
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (l > size && seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, syslog,
+ buf + l, size - l);
+
+ idx = log_next(idx);
+ seq++;
+ }
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
- rcu_read_lock();
- list_for_each_entry_rcu(dumper, &dump_list, list)
- dumper->dump(dumper, reason, s1, l1, s2, l2);
- rcu_read_unlock();
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
#endif
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
- int bl, count, count_lazy;
+ int bl, count, count_lazy, i;
/* If no callbacks are ready, just return.*/
if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL];
*rdp->nxttail[RCU_DONE_TAIL] = NULL;
tail = rdp->nxttail[RCU_DONE_TAIL];
- for (count = RCU_NEXT_SIZE - 1; count >= 0; count--)
- if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL])
- rdp->nxttail[count] = &rdp->nxtlist;
+ for (i = RCU_NEXT_SIZE - 1; i >= 0; i--)
+ if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
+ rdp->nxttail[i] = &rdp->nxtlist;
local_irq_restore(flags);
/* Invoke callbacks. */
if (list != NULL) {
*tail = rdp->nxtlist;
rdp->nxtlist = list;
- for (count = 0; count < RCU_NEXT_SIZE; count++)
- if (&rdp->nxtlist == rdp->nxttail[count])
- rdp->nxttail[count] = tail;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ if (&rdp->nxtlist == rdp->nxttail[i])
+ rdp->nxttail[i] = tail;
else
break;
}
struct splice_pipe_desc spd = {
.pages = pages,
.nr_pages = 0,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
ret += padding;
out:
- splice_shrink_spd(pipe, &spd);
- return ret;
+ splice_shrink_spd(&spd);
+ return ret;
}
static ssize_t relay_file_splice_read(struct file *in,
else
return -EINVAL;
break;
- case PR_GET_TID_ADDRESS:
- error = prctl_get_tid_address(me, (int __user **)arg2);
- break;
default:
return -EINVAL;
}
case PR_SET_MM:
error = prctl_set_mm(arg2, arg3, arg4, arg5);
break;
+ case PR_GET_TID_ADDRESS:
+ error = prctl_get_tid_address(me, (int __user **)arg2);
+ break;
case PR_SET_CHILD_SUBREAPER:
me->signal->is_child_subreaper = !!arg2;
error = 0;
.pages = pages_def,
.partial = partial_def,
.nr_pages = 0, /* This gets updated below. */
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &tracing_pipe_buf_ops,
.spd_release = tracing_spd_release_pipe,
ret = splice_to_pipe(pipe, &spd);
out:
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
out_err:
struct splice_pipe_desc spd = {
.pages = pages_def,
.partial = partial_def,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &buffer_pipe_buf_ops,
.spd_release = buffer_spd_release,
}
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
out:
return ret;
}
static DEFINE_SPINLOCK(free_entries_lock);
/* Global disable flag - will be set in case of an error */
-static bool global_disable __read_mostly;
+static u32 global_disable __read_mostly;
/* Global error count */
static u32 error_count;
global_disable_dent = debugfs_create_bool("disabled", 0444,
dma_debug_dent,
- (u32 *)&global_disable);
+ &global_disable);
if (!global_disable_dent)
goto out_err;
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ /* No need to check any other properties if the probability is 0 */
+ if (attr->probability == 0)
+ return false;
+
if (attr->task_filter && !fail_task(attr, current))
return false;
#include <linux/sched.h>
#include <linux/ksm.h>
#include <linux/fs.h>
+#include <linux/file.h>
/*
* Any behaviour which results in changes to the vma->vm_flags needs to
{
loff_t offset;
int error;
+ struct file *f;
*prev = NULL; /* tell sys_madvise we drop mmap_sem */
if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
return -EINVAL;
- if (!vma->vm_file || !vma->vm_file->f_mapping
- || !vma->vm_file->f_mapping->host) {
+ f = vma->vm_file;
+
+ if (!f || !f->f_mapping || !f->f_mapping->host) {
return -EINVAL;
}
offset = (loff_t)(start - vma->vm_start)
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- /* filesystem's fallocate may need to take i_mutex */
+ /*
+ * Filesystem's fallocate may need to take i_mutex. We need to
+ * explicitly grab a reference because the vma (and hence the
+ * vma's reference to the file) can go away as soon as we drop
+ * mmap_sem.
+ */
+ get_file(f);
up_read(¤t->mm->mmap_sem);
- error = do_fallocate(vma->vm_file,
+ error = do_fallocate(f,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
offset, end - start);
+ fput(f);
down_read(¤t->mm->mmap_sem);
return error;
}
}
}
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+ phys_addr_t new_area_start,
+ phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
phys_addr_t old_size, new_size, addr;
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
- addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+ /* only exclude range when trying to double reserved.regions */
+ if (type != &memblock.reserved)
+ new_area_start = new_area_size = 0;
+
+ addr = memblock_find_in_range(new_area_start + new_area_size,
+ memblock.current_limit,
+ new_size, sizeof(phys_addr_t));
+ if (!addr && new_area_size)
+ addr = memblock_find_in_range(0,
+ min(new_area_start, memblock.current_limit),
+ new_size, sizeof(phys_addr_t));
+
new_array = addr ? __va(addr) : 0;
}
if (!addr) {
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for (i = 0; i < type->cnt; i++) {
* __next_free_mem_range - next function for for_each_free_mem_range()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first free area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
* __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Reverse of __next_free_mem_range().
*/
{
if (root_memcg == memcg)
return true;
- if (!root_memcg->use_hierarchy)
+ if (!root_memcg->use_hierarchy || !memcg)
return false;
return css_is_ancestor(&memcg->css, &root_memcg->css);
}
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
/**
* test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
- VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+ if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+ pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+ __func__, addr, end,
+ vma->vm_start,
+ vma->vm_end);
+ BUG();
+ }
+#endif
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
/**
* zap_page_range - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of nonlinear truncation or shared cache invalidation
*
if (!list_empty(&pagelist)) {
nr_failed = migrate_pages(&pagelist, new_vma_page,
(unsigned long)vma,
- false, true);
+ false, MIGRATE_SYNC);
if (nr_failed)
putback_lru_pages(&pagelist);
}
const nodemask_t *nodemask, unsigned long totalpages)
{
long points;
+ long adj;
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
if (!p)
return 0;
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ adj = p->signal->oom_score_adj;
+ if (adj == OOM_SCORE_ADJ_MIN) {
task_unlock(p);
return 0;
}
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- points -= 30 * totalpages / 1000;
+ adj -= 30;
- /*
- * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
- * either completely disable oom killing or always prefer a certain
- * task.
- */
- points += p->signal->oom_score_adj * totalpages / 1000;
+ /* Normalize to oom_score_adj units */
+ adj *= totalpages / 1000;
+ points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
/**
* dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
/**
* swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
* @old: old id
* @new: new id
*
/**
* swap_cgroup_record - record mem_cgroup for this swp_entry.
* @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
*
* Returns old value at success, 0 at failure.
* (Of course, old value can be 0.)
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
* @chunk: chunk to depopulate
* @off: offset to the area to depopulate
* @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
*
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk. If @flush is true, vcache is flushed before unmapping
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
if (error > 0) {
*ppos += error;
const char *sptr = va_arg(ap, const char *);
uint16_t len = 0;
if (sptr)
- len = min_t(uint16_t, strlen(sptr),
+ len = min_t(size_t, strlen(sptr),
USHRT_MAX);
errcode = p9pdu_writef(pdu, proto_version,
* changes */
if (skb_linearize(skb) < 0)
goto out;
+ /* skb_linearize() possibly changed skb->data */
+ tt_query = (struct tt_query_packet *)skb->data;
tt_len = tt_query->tt_data * sizeof(struct tt_change);
struct tt_orig_list_entry *orig_entry;
orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu);
- atomic_dec(&orig_entry->orig_node->tt_size);
orig_node_free_ref(orig_entry->orig_node);
kfree(orig_entry);
}
static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry)
{
+ /* to avoid race conditions, immediately decrease the tt counter */
+ atomic_dec(&orig_entry->orig_node->tt_size);
call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu);
}
}
spin_unlock_bh(list_lock);
}
- atomic_set(&orig_node->tt_size, 0);
orig_node->tt_initialised = false;
}
{
struct tt_local_entry *tt_local_entry = NULL;
struct tt_global_entry *tt_global_entry = NULL;
- bool ret = true;
+ bool ret = false;
if (!atomic_read(&bat_priv->ap_isolation))
- return false;
+ goto out;
tt_local_entry = tt_local_hash_find(bat_priv, dst);
if (!tt_local_entry)
if (!tt_global_entry)
goto out;
- if (_is_ap_isolated(tt_local_entry, tt_global_entry))
+ if (!_is_ap_isolated(tt_local_entry, tt_global_entry))
goto out;
- ret = false;
+ ret = true;
out:
if (tt_global_entry)
hci_dev_unlock(hdev);
}
+static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_key_refresh_complete *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
+ BT_DBG("%s status %u handle %u", hdev->name, ev->status,
+ __le16_to_cpu(ev->handle));
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
+ if (!conn)
+ goto unlock;
+
+ if (!ev->status)
+ conn->sec_level = conn->pending_sec_level;
+
+ clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
+
+ if (ev->status && conn->state == BT_CONNECTED) {
+ hci_acl_disconn(conn, HCI_ERROR_AUTH_FAILURE);
+ hci_conn_put(conn);
+ goto unlock;
+ }
+
+ if (conn->state == BT_CONFIG) {
+ if (!ev->status)
+ conn->state = BT_CONNECTED;
+
+ hci_proto_connect_cfm(conn, ev->status);
+ hci_conn_put(conn);
+ } else {
+ hci_auth_cfm(conn, ev->status);
+
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+unlock:
+ hci_dev_unlock(hdev);
+}
+
static inline u8 hci_get_auth_req(struct hci_conn *conn)
{
/* If remote requests dedicated bonding follow that lead */
hci_extended_inquiry_result_evt(hdev, skb);
break;
+ case HCI_EV_KEY_REFRESH_COMPLETE:
+ hci_key_refresh_complete_evt(hdev, skb);
+ break;
+
case HCI_EV_IO_CAPA_REQUEST:
hci_io_capa_request_evt(hdev, skb);
break;
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && INPUT && HID_SUPPORT
+ depends on BT && INPUT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
security_timer.work);
- l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ BT_DBG("conn %p", conn);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
+ smp_chan_destroy(conn);
+ l2cap_conn_del(conn->hcon, ETIMEDOUT);
+ }
}
static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status)
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
- switch (type) {
- case L2CAP_CONF_RFC:
- if (olen == sizeof(rfc))
- memcpy(&rfc, (void *)val, olen);
- goto done;
- }
+ if (type != L2CAP_CONF_RFC)
+ continue;
+
+ if (olen != sizeof(rfc))
+ break;
+
+ memcpy(&rfc, (void *)val, olen);
+ goto done;
}
/* Use sane default values in case a misbehaving remote device
else
conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr);
- if (!conn) {
+ if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) {
err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT,
MGMT_STATUS_NOT_CONNECTED);
goto failed;
pairing_complete(cmd, mgmt_status(status));
}
+static void le_connect_complete_cb(struct hci_conn *conn, u8 status)
+{
+ struct pending_cmd *cmd;
+
+ BT_DBG("status %u", status);
+
+ if (!status)
+ return;
+
+ cmd = find_pairing(conn);
+ if (!cmd)
+ BT_DBG("Unable to find a pending command");
+ else
+ pairing_complete(cmd, mgmt_status(status));
+}
+
static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
u16 len)
{
/* For LE, just connecting isn't a proof that the pairing finished */
if (cp->addr.type == BDADDR_BREDR)
conn->connect_cfm_cb = pairing_complete_cb;
+ else
+ conn->connect_cfm_cb = le_connect_complete_cb;
conn->security_cfm_cb = pairing_complete_cb;
conn->disconn_cfm_cb = pairing_complete_cb;
auth |= (req->auth_req | rsp->auth_req) & SMP_AUTH_MITM;
- ret = tk_request(conn, 0, auth, rsp->io_capability, req->io_capability);
+ ret = tk_request(conn, 0, auth, req->io_capability, rsp->io_capability);
if (ret)
return SMP_UNSPECIFIED;
return 0;
}
-static u8 smp_ltk_encrypt(struct l2cap_conn *conn)
+static u8 smp_ltk_encrypt(struct l2cap_conn *conn, u8 sec_level)
{
struct smp_ltk *key;
struct hci_conn *hcon = conn->hcon;
if (!key)
return 0;
+ if (sec_level > BT_SECURITY_MEDIUM && !key->authenticated)
+ return 0;
+
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &hcon->flags))
return 1;
hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return 1;
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn))
+ if (smp_ltk_encrypt(conn, sec_level))
goto done;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return -ENOMEM;
dev_net_set(dev, net);
+ dev->rtnl_link_ops = &br_link_ops;
res = register_netdev(dev);
if (res)
return 0;
}
-static struct rtnl_link_ops br_link_ops __read_mostly = {
+struct rtnl_link_ops br_link_ops __read_mostly = {
.kind = "bridge",
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
#endif
/* br_netlink.c */
+extern struct rtnl_link_ops br_link_ops;
extern int br_netlink_init(void);
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
* Author: Sjur Brendeland/sjur.brandeland@stericsson.com
* License terms: GNU General Public License (GPL) version 2
*
- * Borrowed heavily from file: pn_dev.c. Thanks to
- * Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont
* and Sakari Ailus <sakari.ailus@nokia.com>
*/
cfsk_hold, cfsk_put);
cf_sk->sk.sk_state = CAIF_CONNECTED;
set_tx_flow_on(cf_sk);
+ cf_sk->sk.sk_shutdown = 0;
cf_sk->sk.sk_state_change(&cf_sk->sk);
break;
if (err < 0)
goto free_skb;
- /* to be able to check the received tx sock reference in raw_rcv() */
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
-
skb->dev = dev;
skb->sk = sk;
/* unmount */
ceph_osdc_stop(&client->osdc);
- /*
- * make sure osd connections close out before destroying the
- * auth module, which is needed to free those connections'
- * ceph_authorizers.
- */
- ceph_msgr_flush();
-
ceph_monc_stop(&client->monc);
ceph_debugfs_client_cleanup(client);
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
}
+#ifdef CONFIG_BLOCK
+ else
+ m->bio_iter = NULL;
+#endif
dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
mutex_unlock(&monc->mutex);
+ /*
+ * flush msgr queue before we destroy ourselves to ensure that:
+ * - any work that references our embedded con is finished.
+ * - any osd_client or other work that may reference an authorizer
+ * finishes before we shut down the auth subsystem.
+ */
+ ceph_msgr_flush();
+
ceph_auth_destroy(monc->auth);
ceph_msg_put(monc->m_auth);
if (req->r_request)
ceph_msg_put(req->r_request);
- if (req->r_reply)
- ceph_msg_put(req->r_reply);
if (req->r_con_filling_msg) {
dout("release_request revoking pages %p from con %p\n",
req->r_pages, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg,
req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
}
+ if (req->r_reply)
+ ceph_msg_put(req->r_reply);
if (req->r_own_pages)
ceph_release_page_vector(req->r_pages,
req->r_num_pages);
if (req->r_con_filling_msg == con && req->r_reply == msg) {
dout(" dropping con_filling_msg ref %p\n", con);
req->r_con_filling_msg = NULL;
- ceph_con_put(con);
+ con->ops->put(con);
}
if (!req->r_got_reply) {
dout("get_reply revoking msg %p from old con %p\n",
req->r_reply, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
req->r_con_filling_msg = NULL;
}
#endif
}
*skip = 0;
- req->r_con_filling_msg = ceph_con_get(con);
+ req->r_con_filling_msg = con->ops->get(con);
dout("get_reply tid %lld %p\n", tid, m);
out:
no_module = request_module("netdev-%s", name);
if (no_module && capable(CAP_SYS_MODULE)) {
if (!request_module("%s", name))
- pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
- name);
+ pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+ name);
}
}
EXPORT_SYMBOL(dev_load);
return 0;
}
-/*
- * Try to orphan skb early, right before transmission by the device.
- * We cannot orphan skb if tx timestamp is requested or the sk-reference
- * is needed on driver level for other reasons, e.g. see net/can/raw.c
- */
-static inline void skb_orphan_try(struct sk_buff *skb)
-{
- struct sock *sk = skb->sk;
-
- if (sk && !skb_shinfo(skb)->tx_flags) {
- /* skb_tx_hash() wont be able to get sk.
- * We copy sk_hash into skb->rxhash
- */
- if (!skb->rxhash)
- skb->rxhash = sk->sk_hash;
- skb_orphan(skb);
- }
-}
-
static bool can_checksum_protocol(netdev_features_t features, __be16 protocol)
{
return ((features & NETIF_F_GEN_CSUM) ||
if (!list_empty(&ptype_all))
dev_queue_xmit_nit(skb, dev);
- skb_orphan_try(skb);
-
features = netif_skb_features(skb);
if (vlan_tx_tag_present(skb) &&
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol ^ skb->rxhash;
+ hash = (__force u16) skb->protocol;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * qcount) >> 32) + qoffset;
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = MAX_SKB_FRAGS,
.flags = flags,
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
if (w->leaf && fn->fn_flags & RTN_RTINFO) {
int err;
- if (w->count < w->skip) {
- w->count++;
+ if (w->skip) {
+ w->skip--;
continue;
}
net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ;
net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
-#ifdef CONFIG_PROC_FS
- proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
- proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
net->ipv6.ip6_rt_gc_expire = 30*HZ;
ret = 0;
static void __net_exit ip6_route_net_exit(struct net *net)
{
-#ifdef CONFIG_PROC_FS
- proc_net_remove(net, "ipv6_route");
- proc_net_remove(net, "rt6_stats");
-#endif
kfree(net->ipv6.ip6_null_entry);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
+static int __net_init ip6_route_net_init_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
+ proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
+#endif
+ return 0;
+}
+
+static void __net_exit ip6_route_net_exit_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_remove(net, "ipv6_route");
+ proc_net_remove(net, "rt6_stats");
+#endif
+}
+
static struct pernet_operations ip6_route_net_ops = {
.init = ip6_route_net_init,
.exit = ip6_route_net_exit,
};
+static struct pernet_operations ip6_route_net_late_ops = {
+ .init = ip6_route_net_init_late,
+ .exit = ip6_route_net_exit_late,
+};
+
static struct notifier_block ip6_route_dev_notifier = {
.notifier_call = ip6_route_dev_notify,
.priority = 0,
if (ret)
goto xfrm6_init;
+ ret = register_pernet_subsys(&ip6_route_net_late_ops);
+ if (ret)
+ goto fib6_rules_init;
+
ret = -ENOBUFS;
if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) ||
__rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL))
- goto fib6_rules_init;
+ goto out_register_late_subsys;
ret = register_netdevice_notifier(&ip6_route_dev_notifier);
if (ret)
- goto fib6_rules_init;
+ goto out_register_late_subsys;
out:
return ret;
+out_register_late_subsys:
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_init:
fib6_rules_cleanup();
xfrm6_init:
void ip6_route_cleanup(void)
{
unregister_netdevice_notifier(&ip6_route_dev_notifier);
+ unregister_pernet_subsys(&ip6_route_net_late_ops);
fib6_rules_cleanup();
xfrm6_fini();
fib6_gc_cleanup();
tcp_rsk(req)->snt_isn = isn;
tcp_rsk(req)->snt_synack = tcp_time_stamp;
- security_inet_conn_request(sk, skb, req);
+ if (security_inet_conn_request(sk, skb, req))
+ goto drop_and_release;
if (tcp_v6_send_synack(sk, req,
(struct request_values *)&tmp_ext,
skb_trim(skb, skb->dev->mtu);
}
skb->protocol = ETH_P_AF_IUCV;
- skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb)
return -ENOMEM;
struct sock *tunnel_sock;
struct l2tp_session *session;
struct list_head list;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_errors;
};
/* via l2tp_session_priv() */
struct l2tp_eth *priv = netdev_priv(dev);
struct l2tp_session *session = priv->session;
+ atomic_long_add(skb->len, &priv->tx_bytes);
+ atomic_long_inc(&priv->tx_packets);
+
l2tp_xmit_skb(session, skb, session->hdr_len);
- dev->stats.tx_bytes += skb->len;
- dev->stats.tx_packets++;
+ return NETDEV_TX_OK;
+}
- return 0;
+static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct l2tp_eth *priv = netdev_priv(dev);
+
+ stats->tx_bytes = atomic_long_read(&priv->tx_bytes);
+ stats->tx_packets = atomic_long_read(&priv->tx_packets);
+ stats->rx_bytes = atomic_long_read(&priv->rx_bytes);
+ stats->rx_packets = atomic_long_read(&priv->rx_packets);
+ stats->rx_errors = atomic_long_read(&priv->rx_errors);
+ return stats;
}
+
static struct net_device_ops l2tp_eth_netdev_ops = {
.ndo_init = l2tp_eth_dev_init,
.ndo_uninit = l2tp_eth_dev_uninit,
.ndo_start_xmit = l2tp_eth_dev_xmit,
+ .ndo_get_stats64 = l2tp_eth_get_stats64,
};
static void l2tp_eth_dev_setup(struct net_device *dev)
{
ether_setup(dev);
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->features |= NETIF_F_LLTX;
dev->netdev_ops = &l2tp_eth_netdev_ops;
dev->destructor = free_netdev;
}
{
struct l2tp_eth_sess *spriv = l2tp_session_priv(session);
struct net_device *dev = spriv->dev;
+ struct l2tp_eth *priv = netdev_priv(dev);
if (session->debug & L2TP_MSG_DATA) {
unsigned int length;
- u8 *ptr = skb->data;
length = min(32u, skb->len);
if (!pskb_may_pull(skb, length))
goto error;
pr_debug("%s: eth recv\n", session->name);
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
nf_reset(skb);
if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) {
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += data_len;
- } else
- dev->stats.rx_errors++;
-
+ atomic_long_inc(&priv->rx_packets);
+ atomic_long_add(data_len, &priv->rx_bytes);
+ } else {
+ atomic_long_inc(&priv->rx_errors);
+ }
return;
error:
- dev->stats.rx_errors++;
+ atomic_long_inc(&priv->rx_errors);
kfree_skb(skb);
}
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i, ret;
+ if (!ieee80211_sdata_running(sdata))
+ return -ENETDOWN;
+
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
ret = drv_set_bitrate_mask(local, sdata, mask);
if (ret)
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
if (WARN_ON(!ifmgd->associated))
return;
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+ ieee80211_stop_poll(sdata);
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[DEAUTH_DISASSOC_LEN];
- ieee80211_stop_poll(sdata);
-
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
false, frame_buf);
mutex_unlock(&ifmgd->mtx);
* frames that we didn't handle, including returning unknown
* ones. For all other modes we will return them to the sender,
* setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
+ * 802.11-2012 9.24.4.
* Newer versions of hostapd shall also use the management frame
* registration mechanisms, but older ones still use cooked
* monitor interfaces so push all frames there.
sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
return RX_DROP_UNUSABLE;
* @plink_timer: peer link watch timer
* @plink_timer_was_running: used by suspend/resume to restore timers
* @t_offset: timing offset relative to this host
+ * @t_offset_setpoint: reference timing offset of this sta to be used when
+ * calculating clockdrift
+ * @ch_type: peer's channel type
* @debugfs: debug filesystem info
* @dead: set to true when sta is unlinked
* @uploaded: set to true when sta is uploaded to the driver
* @sta: station information we share with the driver
* @sta_state: duplicates information about station state (for debug)
* @beacon_loss_count: number of times beacon loss has triggered
+ * @supports_40mhz: tracks whether the station advertised 40 MHz support
+ * as we overwrite its HT parameters with the currently used value
*/
struct sta_info {
/* General information, mostly static */
{
struct xmit_work *work;
- if (!(priv->phy->channels_supported[page] & (1 << chan)))
+ if (!(priv->phy->channels_supported[page] & (1 << chan))) {
WARN_ON(1);
return NETDEV_TX_OK;
+ }
if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) {
u16 crc = crc_ccitt(0, skb->data, skb->len);
return 0;
}
+static int
+ip_set_none(struct sock *ctnl, struct sk_buff *skb,
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const attr[])
+{
+ return -EOPNOTSUPP;
+}
+
static int
ip_set_create(struct sock *ctnl, struct sk_buff *skb,
const struct nlmsghdr *nlh,
}
static const struct nfnl_callback ip_set_netlink_subsys_cb[IPSET_MSG_MAX] = {
+ [IPSET_CMD_NONE] = {
+ .call = ip_set_none,
+ .attr_count = IPSET_ATTR_CMD_MAX,
+ },
[IPSET_CMD_CREATE] = {
.call = ip_set_create,
.attr_count = IPSET_ATTR_CMD_MAX,
#define iface_data(n) (rb_entry(n, struct iface_node, node)->iface)
-static inline long
-ifname_compare(const char *_a, const char *_b)
-{
- const long *a = (const long *)_a;
- const long *b = (const long *)_b;
-
- BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
- if (a[0] != b[0])
- return a[0] - b[0];
- if (IFNAMSIZ > sizeof(long)) {
- if (a[1] != b[1])
- return a[1] - b[1];
- }
- if (IFNAMSIZ > 2 * sizeof(long)) {
- if (a[2] != b[2])
- return a[2] - b[2];
- }
- if (IFNAMSIZ > 3 * sizeof(long)) {
- if (a[3] != b[3])
- return a[3] - b[3];
- }
- return 0;
-}
-
static void
rbtree_destroy(struct rb_root *root)
{
while (n) {
const char *d = iface_data(n);
- long res = ifname_compare(*iface, d);
+ int res = strcmp(*iface, d);
if (res < 0)
n = n->rb_left;
while (*n) {
char *ifname = iface_data(*n);
- long res = ifname_compare(*iface, ifname);
+ int res = strcmp(*iface, ifname);
p = *n;
if (res < 0)
struct hash_netiface4_elem data = { .cidr = HOST_MASK };
u32 ip = 0, ip_to, last;
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netiface6_elem data = { .cidr = HOST_MASK };
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
#ifdef CONFIG_IP_VS_IPV6
/* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(struct net *net,
- const struct in6_addr *addr)
+static bool __ip_vs_addr_is_local_v6(struct net *net,
+ const struct in6_addr *addr)
{
- struct rt6_info *rt;
struct flowi6 fl6 = {
.daddr = *addr,
};
+ struct dst_entry *dst = ip6_route_output(net, NULL, &fl6);
+ bool is_local;
- rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl6);
- if (rt && rt->dst.dev && (rt->dst.dev->flags & IFF_LOOPBACK))
- return 1;
+ is_local = !dst->error && dst->dev && (dst->dev->flags & IFF_LOOPBACK);
- return 0;
+ dst_release(dst);
+ return is_local;
}
#endif
err = nla_parse(cda, ss->cb[cb_id].attr_count,
attr, attrlen, ss->cb[cb_id].policy);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
return err;
+ }
if (nc->call_rcu) {
err = nc->call_rcu(net->nfnl, skb, nlh,
nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
data += 2;
- nfca_poll->nfcid1_len = *data++;
+ nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
pr_debug("sens_res 0x%x, nfcid1_len %d\n",
nfca_poll->sens_res, nfca_poll->nfcid1_len);
struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
__u8 *data)
{
- nfcb_poll->sensb_res_len = *data++;
+ nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
__u8 *data)
{
nfcf_poll->bit_rate = *data++;
- nfcf_poll->sensf_res_len = *data++;
+ nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
pr_debug("bit_rate %d, sensf_res_len %d\n",
nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
switch (ntf->activation_rf_tech_and_mode) {
case NCI_NFC_A_PASSIVE_POLL_MODE:
nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
- nfca_poll->rats_res_len = *data++;
+ nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
if (nfca_poll->rats_res_len > 0) {
memcpy(nfca_poll->rats_res,
case NCI_NFC_B_PASSIVE_POLL_MODE:
nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
- nfcb_poll->attrib_res_len = *data++;
+ nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
if (nfcb_poll->attrib_res_len > 0) {
memcpy(nfcb_poll->attrib_res,
{
struct sock *sk = sock->sk;
- pr_debug("sock=%p\n", sock);
+ pr_debug("sock=%p sk=%p\n", sock, sk);
+
+ if (!sk)
+ return 0;
sock_orphan(sk);
sock_put(sk);
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Remi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ * Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation.
*
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*/
asoc->peer.sack_needed = 1;
asoc->peer.sack_cnt = 0;
+ asoc->peer.sack_generation = 1;
/* Assume that the peer will tell us if he recognizes ASCONF
* as part of INIT exchange.
/* If the SACK timer is running, we have a pending SACK */
if (timer_pending(timer)) {
struct sctp_chunk *sack;
+
+ if (pkt->transport->sack_generation !=
+ pkt->transport->asoc->peer.sack_generation)
+ return retval;
+
asoc->a_rwnd = asoc->rwnd;
sack = sctp_make_sack(asoc);
if (sack) {
SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n");
sctp_bh_unlock_sock(sk);
}
+#if IS_ENABLED(CONFIG_IPV6)
free_next:
+#endif
list_del(&addrw->list);
kfree(addrw);
}
int len;
__u32 ctsn;
__u16 num_gabs, num_dup_tsns;
+ struct sctp_association *aptr = (struct sctp_association *)asoc;
struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+ struct sctp_transport *trans;
memset(gabs, 0, sizeof(gabs));
ctsn = sctp_tsnmap_get_ctsn(map);
sctp_addto_chunk(retval, sizeof(__u32) * num_dup_tsns,
sctp_tsnmap_get_dups(map));
+ /* Once we have a sack generated, check to see what our sack
+ * generation is, if its 0, reset the transports to 0, and reset
+ * the association generation to 1
+ *
+ * The idea is that zero is never used as a valid generation for the
+ * association so no transport will match after a wrap event like this,
+ * Until the next sack
+ */
+ if (++aptr->peer.sack_generation == 0) {
+ list_for_each_entry(trans, &asoc->peer.transport_addr_list,
+ transports)
+ trans->sack_generation = 0;
+ aptr->peer.sack_generation = 1;
+ }
nodata:
return retval;
}
case SCTP_CMD_REPORT_TSN:
/* Record the arrival of a TSN. */
error = sctp_tsnmap_mark(&asoc->peer.tsn_map,
- cmd->obj.u32);
+ cmd->obj.u32, NULL);
break;
case SCTP_CMD_REPORT_FWDTSN:
peer->af_specific = sctp_get_af_specific(addr->sa.sa_family);
memset(&peer->saddr, 0, sizeof(union sctp_addr));
+ peer->sack_generation = 0;
+
/* From 6.3.1 RTO Calculation:
*
* C1) Until an RTT measurement has been made for a packet sent to the
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn)
+int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn,
+ struct sctp_transport *trans)
{
u16 gap;
*/
map->max_tsn_seen++;
map->cumulative_tsn_ack_point++;
+ if (trans)
+ trans->sack_generation =
+ trans->asoc->peer.sack_generation;
map->base_tsn++;
} else {
/* Either we already have a gap, or about to record a gap, so
* can mark it as received so the tsn_map is updated correctly.
*/
if (sctp_tsnmap_mark(&asoc->peer.tsn_map,
- ntohl(chunk->subh.data_hdr->tsn)))
+ ntohl(chunk->subh.data_hdr->tsn),
+ chunk->transport))
goto fail_mark;
/* First calculate the padding, so we don't inadvertently
if (chunk && (freed >= needed)) {
__u32 tsn;
tsn = ntohl(chunk->subh.data_hdr->tsn);
- sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn);
+ sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
sctp_ulpq_tail_data(ulpq, chunk, gfp);
sctp_ulpq_partial_delivery(ulpq, chunk, gfp);
spin_unlock(®_requests_lock);
if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
- cancel_delayed_work_sync(®_timeout);
+ cancel_delayed_work(®_timeout);
if (need_more_processing)
schedule_work(®_work);
ntype == NL80211_IFTYPE_P2P_CLIENT))
return -EBUSY;
- if (ntype != otype) {
+ if (ntype != otype && netif_running(dev)) {
err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
ntype);
if (err)
push(@signature_tags, "Reviewed-by:");
push(@signature_tags, "Acked-by:");
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
# rfc822 email address - preloaded methods go here.
my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
my $rfc822_char = '[\\000-\\377]';
my @status = ();
my %deduplicate_name_hash = ();
my %deduplicate_address_hash = ();
-my $signature_pattern;
my @maintainers = get_maintainers();
#include <linux/mman.h>
#include <linux/mount.h>
#include <linux/personality.h>
+#include <linux/backing-dev.h>
#include <net/flow.h>
#define MAX_LSM_EVM_XATTR 2
MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
MODULE_LICENSE("GPL");
-#define FREQ_LO (76U * 16000)
-#define FREQ_HI (108U * 16000)
+#define FREQ_LO ((tea->tea5759 ? 760 : 875) * 1600U)
+#define FREQ_HI ((tea->tea5759 ? 910 : 1080) * 1600U)
/*
* definitions
return data;
}
-static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
{
- u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK;
+ u32 freq = val & TEA575X_BIT_FREQ_MASK;
if (freq == 0)
return freq;
return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */
}
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+ return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
static void snd_tea575x_set_freq(struct snd_tea575x *tea)
{
u32 freq = tea->freq;
tea->val &= ~TEA575X_BIT_FREQ_MASK;
tea->val |= freq & TEA575X_BIT_FREQ_MASK;
snd_tea575x_write(tea, tea->val);
+ tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
}
/*
}
static const struct v4l2_file_operations tea575x_fops = {
- .owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
};
static const struct video_device tea575x_radio = {
- .fops = &tea575x_fops,
.ioctl_ops = &tea575x_ioctl_ops,
.release = video_device_release_empty,
};
/*
* initialize all the tea575x chips
*/
-int snd_tea575x_init(struct snd_tea575x *tea)
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
{
int retval;
tea->vd.lock = &tea->mutex;
tea->vd.v4l2_dev = tea->v4l2_dev;
tea->vd.ctrl_handler = &tea->ctrl_handler;
+ tea->fops = tea575x_fops;
+ tea->fops.owner = owner;
+ tea->vd.fops = &tea->fops;
set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags);
/* disable hw_freq_seek if we can't use it */
if (tea->cannot_read_data)
chip->tea.ops = &snd_es1968_tea_ops;
strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card));
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
- if (!snd_tea575x_init(&chip->tea))
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE))
printk(KERN_INFO "es1968: detected TEA575x radio\n");
#endif
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
- if (snd_tea575x_init(&chip->tea)) {
+ if (snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
snd_fm801_free(chip);
return -ENODEV;
/* autodetect tuner connection */
for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) {
chip->tea575x_tuner = tea575x_tuner;
- if (!snd_tea575x_init(&chip->tea)) {
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
get_tea575x_gpio(chip)->name);
break;
snd-hda-codec-realtek.
This module is automatically loaded at probing.
-config SND_HDA_ENABLE_REALTEK_QUIRKS
- bool "Build static quirks for Realtek codecs"
- depends on SND_HDA_CODEC_REALTEK
- default y
- help
- Say Y here to build the static quirks codes for Realtek codecs.
- If you need the "model" preset that the default BIOS auto-parser
- can't handle, turn this option on.
-
- If your device works with model=auto option, basically you don't
- need the quirk code. By turning this off, you can reduce the
- module size quite a lot.
-
config SND_HDA_CODEC_ANALOG
bool "Build Analog Device HD-audio codec support"
default y
const struct hda_verb *list)
{
const struct hda_verb **v;
- snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
v = snd_array_new(&spec->verbs);
if (!v)
return -ENOMEM;
const struct snd_pci_quirk *quirk,
const struct hda_fixup *fixlist);
+static inline void snd_hda_gen_init(struct hda_gen_spec *spec)
+{
+ snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
+}
+
+static inline void snd_hda_gen_free(struct hda_gen_spec *spec)
+{
+ snd_array_free(&spec->verbs);
+}
+
#endif /* __SOUND_HDA_AUTO_PARSER_H */
{
if (!codec)
return;
+ snd_hda_jack_tbl_clear(codec);
restore_init_pincfgs(codec);
#ifdef CONFIG_SND_HDA_POWER_SAVE
cancel_delayed_work(&codec->power_work);
list_del(&codec->list);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
+ snd_array_free(&codec->cvt_setups);
snd_array_free(&codec->conn_lists);
snd_array_free(&codec->spdif_out);
codec->bus->caddr_tbl[codec->addr] = NULL;
/* free only driver_pins so that init_pins + user_pins are restored */
snd_array_free(&codec->driver_pins);
restore_pincfgs(codec);
+ snd_array_free(&codec->cvt_setups);
+ snd_array_free(&codec->spdif_out);
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
codec->power_jiffies += delta;
}
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
struct hda_bus *bus = codec->bus;
spin_lock(&codec->power_lock);
codec->power_count++;
- if (codec->power_on || codec->power_transition > 0) {
+ /* Return if power_on or transitioning to power_on, unless currently
+ * powering down. */
+ if ((codec->power_on || codec->power_transition > 0) &&
+ !(wait_power_down && codec->power_transition < 0)) {
spin_unlock(&codec->power_lock);
return;
}
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+ __snd_hda_power_up(codec, false);
+}
EXPORT_SYMBOL_HDA(snd_hda_power_up);
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ * D3 transition to complete. This differs from snd_hda_power_up() when
+ * power_transition == -1. snd_hda_power_up sees this case as a nop,
+ * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ * back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+ /* This will cancel and wait for pending power_work to complete. */
+ __snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
*/
#ifdef CONFIG_SND_HDA_POWER_SAVE
void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#endif
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
- snd_hda_power_up(apcm->codec);
+ snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
static void conexant_free(struct hda_codec *codec)
{
+ struct conexant_spec *spec = codec->spec;
+ snd_hda_gen_free(&spec->gen);
snd_hda_detach_beep_device(codec);
- kfree(codec->spec);
+ kfree(spec);
}
static const struct snd_kcontrol_new cxt_capture_mixers[] = {
SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{}
};
if (!spec)
return -ENOMEM;
codec->spec = spec;
+ snd_hda_gen_init(&spec->gen);
switch (codec->vendor_id) {
case 0x14f15045:
alc_shutup(codec);
alc_free_kctls(codec);
alc_free_bind_ctls(codec);
+ snd_hda_gen_free(&spec->gen);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
return -ENOMEM;
codec->spec = spec;
spec->mixer_nid = mixer_nid;
+ snd_hda_gen_init(&spec->gen);
err = alc_codec_rename_from_preset(codec);
if (err < 0) {
{}
};
+static void alc662_fill_coef(struct hda_codec *codec)
+{
+ int val, coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030) {
+ val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
+ }
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ break;
+ }
+}
/*
*/
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- if ((alc_get_coef0(codec) & (1 << 14)) &&
- codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1) {
- if (alc_codec_rename(codec, "ALC272X") < 0)
- goto error;
- }
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
alc_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
alc_auto_parse_customize_define(codec);
+ if ((alc_get_coef0(codec) & (1 << 14)) &&
+ codec->bus->pci->subsystem_vendor == 0x1025 &&
+ spec->cdefine.platform_type == 1) {
+ if (alc_codec_rename(codec, "ALC272X") < 0)
+ goto error;
+ }
+
/* automatic parse from the BIOS config */
err = alc662_parse_auto_config(codec);
if (err < 0)
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+ { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
hda_nid_t nid = spec->pwr_nids[i];
- int pinctl, def_conf;
+ unsigned int pinctl, def_conf;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
def_conf = get_defcfg_connect(def_conf);
stac_toggle_power_map(codec, nid, 0);
continue;
}
+ if (def_conf == AC_JACK_PORT_FIXED) {
+ /* no need for jack detection for fixed pins */
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
/* power on when no jack detection is available */
/* or when the VREF is used for controlling LED */
if (!spec->hp_detect ||
}
found:
- data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
- snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
- data | (pll_p << PLLP_SHIFT));
+ snd_soc_update_bits(codec, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
pll_r << PLLR_SHIFT);
snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
/* PLL registers bitfields */
#define PLLP_SHIFT 0
+#define PLLP_MASK 7
#define PLLQ_SHIFT 3
#define PLLR_SHIFT 0
#define PLLJ_SHIFT 2
static int wm2200_bclk_rates_cd[WM2200_NUM_BCLK_RATES] = {
5644800,
+ 3763200,
2882400,
1881600,
1411200,
return ret;
}
+ regcache_cache_only(wm8904->regmap, false);
regcache_sync(wm8904->regmap);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
-#ifdef CONFIG_REGULATOR
- /* Post 2.6.34 we will be able to get a callback when
- * the regulators are disabled which we can use but
- * for now just assume that the power will be cut if
- * the regulator API is in use.
- */
- codec->cache_sync = 1;
-#endif
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
- u16 *reg_cache = codec->reg_cache;
int ret, i;
- codec->cache_sync = 1;
codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
goto err_enable;
}
+ regcache_cache_only(wm8904->regmap, true);
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_VU, WM8904_ADC_VU);
if (!pdata->gpio_cfg[i])
continue;
- reg_cache[WM8904_GPIO_CONTROL_1 + i]
- = pdata->gpio_cfg[i] & 0xffff;
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ pdata->gpio_cfg[i]);
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
- = pdata->mic_cfg[i];
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ pdata->mic_cfg[i]);
}
/* Set Class W by default - this will be managed by the Class
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- if (!wm8994->jackdet || !wm8994->jack_cb)
- return;
-
if (!wm8994->jackdet || !wm8994->jack_cb)
return;
}
}
- regcache_cache_only(codec->control_data, true);
-
/* Apply platform data settings */
snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
- regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
}
dev_info(&i2c->dev, "revision %c\n",
(reg & WM8996_CHIP_REV_MASK) + 'A');
- regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
ret = wm8996_reset(wm8996);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
+ regcache_cache_only(wm8996->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
wm8996_init_gpio(wm8996);
ret = snd_soc_register_codec(&i2c->dev,
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ if (ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
- if (cpu_is_pxa25x())
+ if (ssp->type == PXA25x_SSP)
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_enable(ssp->clk);
return 0;
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val &= ~SSACD_SCDX8;
-#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
-#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
-#endif
default:
return -EINVAL;
}
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
switch (freq_out) {
case 5622000:
break;
default:
-#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
- if (cpu_is_pxa3xx()) {
+ if (ssp->type == PXA3xx_SSP) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
val, freq_out);
break;
}
-#endif
return -EINVAL;
}
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
sscr0 |= SSCR0_FPCKE;
-#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
-
-#ifdef CONFIG_PXA3xx
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
-#else
- return -EINVAL;
-#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
return 0;
}
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ wm8903_mic_detect(codec, NULL, 0, 0);
+
+ return 0;
+}
+
static struct snd_soc_dai_link tegra_wm8903_dai = {
.name = "WM8903",
.stream_name = "WM8903 PCM",
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
+ .remove = tegra_wm8903_remove,
+
.controls = tegra_wm8903_controls,
.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
.dapm_widgets = tegra_wm8903_dapm_widgets,
int ret;
u8 data;
struct usb_device *device = interface_to_usbdev(intf);
- const struct firmware *fw = 0;
+ const struct firmware *fw = NULL;
struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
GFP_KERNEL);
.map = audigy2nx_map,
.selector_map = audigy2nx_selectors,
},
+ { /* Logitech, Inc. QuickCam Pro for Notebooks */
+ .id = USB_ID(0x046d, 0x0991),
+ .ignore_ctl_error = 1,
+ },
+ { /* Logitech, Inc. QuickCam E 3500 */
+ .id = USB_ID(0x046d, 0x09a4),
+ .ignore_ctl_error = 1,
+ },
{
/* Hercules DJ Console (Windows Edition) */
.id = USB_ID(0x06f8, 0xb000),
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ get_endpoint(alts, 1)->bmAttributes,
+ get_endpoint(alts, 1)->bLength,
+ get_endpoint(alts, 1)->bSynchAddress);
return -EINVAL;
}
ep = get_endpoint(alts, 1)->bEndpointAddress;
- if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+ if (!implicit_fb &&
+ get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
- (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
- ( is_playback && !implicit_fb))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
return -EINVAL;
}
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
int err;
struct snd_usb_substream *subs = substream->runtime->private_data;
}
}
},
+{
+ USB_DEVICE(0x0582, 0x014d),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "BOSS", */
+ /* .product_name = "GT-100", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
fprintf(stderr, "cannot use both --output and --log-fd\n");
usage_with_options(stat_usage, options);
}
+
+ if (output_fd < 0) {
+ fprintf(stderr, "argument to --log-fd must be a > 0\n");
+ usage_with_options(stat_usage, options);
+ }
+
if (!output) {
struct timespec tm;
mode = append_file ? "a" : "w";
}
clock_gettime(CLOCK_REALTIME, &tm);
fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
- } else if (output_fd != 2) {
+ } else if (output_fd > 0) {
mode = append_file ? "a" : "w";
output = fdopen(output_fd, mode);
if (!output) {
else
return -1;
} else if (ph->needs_swap) {
- unsigned int i;
/*
* feature bitmap is declared as an array of unsigned longs --
* not good since its size can differ between the host that
* file), punt and fallback to the original behavior --
* clearing all feature bits and setting buildid.
*/
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
- header->adds_features[i] = bswap_64(header->adds_features[i]);
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
- header->adds_features[i] = bswap_64(header->adds_features[i]);
- header->adds_features[i] = bswap_32(header->adds_features[i]);
- }
+ /* unswap as u64 */
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
+
+ /* unswap as u32 */
+ mem_bswap_32(&header->adds_features,
+ BITS_TO_U32(HEADER_FEAT_BITS));
}
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
return ret <= 0 ? -1 : 0;
}
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel)
+{
+ struct event_format *event = trace_find_event(evsel->attr.config);
+ char bf[128];
+
+ if (event == NULL)
+ return -1;
+
+ snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+ evsel->name = strdup(bf);
+ if (event->name == NULL)
+ return -1;
+
+ return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+ perf_evsel__set_tracepoint_name(pos))
+ return -1;
+ }
+
+ return 0;
+}
+
int perf_session__read_header(struct perf_session *session, int fd)
{
struct perf_header *header = &session->header;
lseek(fd, header->data_offset, SEEK_SET);
+ if (perf_evlist__set_tracepoint_names(session->evlist))
+ goto out_delete_evlist;
+
header->frozen = 1;
return 0;
out_errno:
#define BITS_PER_LONG __WORDSIZE
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
tool->finished_round = process_finished_round_stub;
}
}
+
+void mem_bswap_32(void *src, int byte_size)
+{
+ u32 *m = src;
+ while (byte_size > 0) {
+ *m = bswap_32(*m);
+ byte_size -= sizeof(u32);
+ ++m;
+ }
+}
void mem_bswap_64(void *src, int byte_size)
{
bool perf_session__has_traces(struct perf_session *self, const char *msg);
void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
void perf_event__attr_swap(struct perf_event_attr *attr);
int perf_session__create_kernel_maps(struct perf_session *self);
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- u8 header_type;
if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
return -EINVAL;
}
/* Don't allow bridges to be assigned */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
- if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
r = -EPERM;
goto out_put;
}
}
static int
-kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_irq_routing_table *irq_rt;
struct _irqfd *irqfd, *tmp;
return -ENOMEM;
irqfd->kvm = kvm;
- irqfd->gsi = gsi;
+ irqfd->gsi = args->gsi;
INIT_LIST_HEAD(&irqfd->list);
INIT_WORK(&irqfd->inject, irqfd_inject);
INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
- file = eventfd_fget(fd);
+ file = eventfd_fget(args->fd);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
goto fail;
* shutdown any irqfd's that match fd+gsi
*/
static int
-kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct _irqfd *irqfd, *tmp;
struct eventfd_ctx *eventfd;
- eventfd = eventfd_ctx_fdget(fd);
+ eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
- if (irqfd->eventfd == eventfd && irqfd->gsi == gsi) {
+ if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
/*
* This rcu_assign_pointer is needed for when
* another thread calls kvm_irq_routing_update before
}
int
-kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
- if (flags & KVM_IRQFD_FLAG_DEASSIGN)
- return kvm_irqfd_deassign(kvm, fd, gsi);
+ if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
+ return -EINVAL;
+
+ if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
+ return kvm_irqfd_deassign(kvm, args);
- return kvm_irqfd_assign(kvm, fd, gsi);
+ return kvm_irqfd_assign(kvm, args);
}
/*
r = -EFAULT;
if (copy_from_user(&data, argp, sizeof data))
goto out;
- r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+ r = kvm_irqfd(kvm, &data);
break;
}
case KVM_IOEVENTFD: {
kvm_arch_hardware_unsetup();
kvm_arch_exit();
free_cpumask_var(cpus_hardware_enabled);
+ __free_page(fault_page);
__free_page(hwpoison_page);
__free_page(bad_page);
}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff