powerpc: scan_features() updates incorrect bits for REAL_LE

commit 6997e57d693b07289694239e52a10d2f02c3a46f upstream.

The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU
feature value, meaning all the remaining elements initialise the wrong
values.

This means instead of checking for byte 5, bit 0, we check for byte 0,
bit 0, and then we incorrectly set the CPU feature bit as well as MMU
feature bit 1 and CPU user feature bits 0 and 2 (5).

Checking byte 0 bit 0 (IBM numbering), means we're looking at the
"Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU.
In practice that bit is set on all platforms which have the property.

This means we set CPU_FTR_REAL_LE always. In practice that seems not to
matter because all the modern cpus which have this property also
implement REAL_LE, and we've never needed to disable it.

We're also incorrectly setting MMU feature bit 1, which is:

  #define MMU_FTR_TYPE_8xx 0x00000002

Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E
code, which can't run on the same cpus as scan_features(). So this also
doesn't matter in practice.

Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2
is not currently used, and bit 0 is:

  #define PPC_FEATURE_PPC_LE 0x00000001

Which says the CPU supports the old style "PPC Little Endian" mode.
Again this should be harmless in practice as no 64-bit CPUs implement
that mode.

Fix the code by adding the missing initialisation of the MMU feature.

Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It
would be unsafe to start using it as old kernels incorrectly set it.

Fixes: 44ae3ab3358e ("powerpc: Free up some CPU feature bits by moving out MMU-related features")
Signed-off-by: Anton Blanchard <anton@samba.org>
[mpe: Flesh out changelog, add comment reserving 0x4]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: ads7846 - correct the value got from SPI

commit 879f2fea8a5a748bcbf98d2cdce9139c045505d3 upstream.

According to the touch controller spec, SPI return a 16 bit value, only 12
bits are valid, they are bit[14-3].

The value of MISO and MOSI can be configured when SPI is in idle mode.
Currently this touch driver assumes the SPI bus sets the MOSI and MISO in
low level when SPI bus is in idle mode. So the bit[15] of the value got
from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in
high level during the SPI idle mode, the bit[15] of the value get from SPI
is always 1. If bit[15] is not masked, we may get the wrong value.

Mask the invalid bit to make sure the correct value gets returned.
Regardless of the SPI bus idle configuration.

Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il>
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: serial: cp210x: add Straizona Focusers device ids

commit 613ac23a46e10d4d4339febdd534fafadd68e059 upstream.

Adding VID:PID for Straizona Focusers to cp210x driver.

Signed-off-by: Jasem Mutlaq <mutlaqja@ikarustech.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: serial: cp210x: add ID for Link ECU

commit 1d377f4d690637a0121eac8701f84a0aa1e69a69 upstream.

The Link ECU is an aftermarket ECU computer for vehicles that provides
full tuning abilities as well as datalogging and displaying capabilities
via the USB to Serial adapter built into the device.

Signed-off-by: Mike Manning <michael@bsch.com.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ACPICA: Dispatcher: Update thread ID for recursive method calls

commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream.

ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25

Set the mutex owner thread ID.
Original patch from: Prarit Bhargava <prarit@redhat.com>

Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

MAINTAINERS: Remove asterisk from EFI directory names

commit e8dfe6d8f6762d515fcd4f30577f7bfcf7659887 upstream.

Mark reported that having asterisks on the end of directory names
confuses get_maintainer.pl when it encounters subdirectories, and that
my name does not appear when run on drivers/firmware/efi/libstub.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1462303781-8686-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

batman-adv: Fix broadcast/ogm queue limit on a removed interface

commit c4fdb6cff2aa0ae740c5f19b6f745cbbe786d42f upstream.

When removing a single interface while a broadcast or ogm packet is
still pending then we will free the forward packet without releasing the
queue slots again.

This patch is supposed to fix this issue.

Fixes: 6d5808d4ae1b ("batman-adv: Add missing hardif_free_ref in forw_packet_free")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Willy Tarreau <w@1wt.eu>

proc: prevent accessing /proc/<PID>/environ until it's ready

commit 8148a73c9901a8794a50f950083c00ccf97d43b3 upstream.

If /proc/<PID>/environ gets read before the envp[] array is fully set up
in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to
read more bytes than are actually written, as env_start will already be
set but env_end will still be zero, making the range calculation
underflow, allowing to read beyond the end of what has been written.

Fix this as it is done for /proc/<PID>/cmdline by testing env_end for
zero.  It is, apparently, intentionally set last in create_*_tables().

This bug was found by the PaX size_overflow plugin that detected the
arithmetic underflow of 'this_len = env_end - (env_start + src)' when
env_end is still zero.

The expected consequence is that userland trying to access
/proc/<PID>/environ of a not yet fully set up process may get
inconsistent data as we're in the middle of copying in the environment
variables.

Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Pax Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel

commit 5616f36713ea77f57ae908bf2fef641364403c9f upstream.

The secondary CPU starts up in ARM mode. When the kernel is compiled in
thumb2 mode we have to explicitly compile the secondary startup
trampoline in ARM mode, otherwise the CPU will go to Nirvana.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

lpfc: fix misleading indentation

commit aeb6641f8ebdd61939f462a8255b316f9bfab707 upstream.

gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array()
call in lpfc_online(), which clearly doesn't look right:

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online':
drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
   lpfc_destroy_vport_work_array(phba, vports);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not
  if (vports != NULL)
  ^~

Looking at the patch that introduced this code, it's clear that the
behavior is correct and the indentation is wrong.

This fixes the indentation and adds curly braces around the previous
if() block for clarity, as that is most likely what caused the code
to be misindented in the first place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list")
Reviewed-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

clk: versatile: sp810: support reentrance

commit ec7957a6aa0aaf981fb8356dc47a2cdd01cde03c upstream.

Despite care take to allocate clocks state containers the
SP810 driver actually just supports creating one instance:
all clocks registered for every instance will end up with the
exact same name and __clk_init() will fail.

Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n>
so every clock on every instance gets a unique name.

This is necessary for the RealView PBA8 which has two SP810
blocks: the second block will not register its clocks unless
every clock on every instance is unique and results in boot
logs like this:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137
  clk_sp810_of_setup+0x110/0x154()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.5.0-rc2-00030-g352718fc39f6-dirty #225
Hardware name: ARM RealView Machine (Device Tree Support)
[<c00167f8>] (unwind_backtrace) from [<c0013204>]
             (show_stack+0x10/0x14)
[<c0013204>] (show_stack) from [<c01a049c>]
             (dump_stack+0x84/0x9c)
[<c01a049c>] (dump_stack) from [<c0024990>]
             (warn_slowpath_common+0x74/0xb0)
[<c0024990>] (warn_slowpath_common) from [<c0024a68>]
             (warn_slowpath_null+0x1c/0x24)
[<c0024a68>] (warn_slowpath_null) from [<c051eb44>]
             (clk_sp810_of_setup+0x110/0x154)
[<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>]
             (of_clk_init+0x12c/0x1c8)
[<c051e3a4>] (of_clk_init) from [<c0504714>]
             (time_init+0x20/0x2c)
[<c0504714>] (time_init) from [<c0501b18>]
             (start_kernel+0x244/0x3c4)
[<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c)
---[ end trace cb88537fdc8fa200 ]---

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Fixes: 6e973d2c4385 "clk: vexpress: Add separate SP810 driver"
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

nbd: ratelimit error msgs after socket close

commit da6ccaaa79caca4f38b540b651238f87215217a2 upstream.

Make the "Attempted send on closed socket" error messages generated in
nbd_request_handler() ratelimited.

When the nbd socket is shutdown, the nbd_request_handler() function emits
an error message for every request remaining in its queue.  If the queue
is large, this will spam a large amount of messages to the log.  There's
no need for a separate error message for each request, so this patch
ratelimits it.

In the specific case this was found, the system was virtual and the error
messages were logged to the serial port, which overwhelmed it.

Fixes: 4d48a542b427 ("nbd: fix I/O hang on disconnected nbds")
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipvs: correct initial offset of Call-ID header search in SIP persistence engine

commit 7617a24f83b5d67f4dab1844956be1cebc44aec8 upstream.

The IPVS SIP persistence engine is not able to parse the SIP header
"Call-ID" when such header is inserted in the first positions of
the SIP message.

When IPVS is configured with "--pe sip" option, like for example:
ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o
some particular messages (see below for details) do not create entries
in the connection template table, which can be listed with:
ipvsadm -Lcn --persistent-conn

Problematic SIP messages are SIP responses having "Call-ID" header
positioned just after message first line:
SIP/2.0 200 OK
[Call-ID header here]
[rest of the headers]

When "Call-ID" header is positioned down (after a few other headers)
it is correctly recognized.

This is due to the data offset used in get_callid function call inside
ip_vs_pe_sip.c file: since dptr already points to the start of the
SIP message, the value of dataoff should be initially 0.
Otherwise the header is searched starting from some bytes after the
first character of the SIP message.

Fixes: 758ff0338722 ("IPVS: sip persistence engine")
Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

compiler-gcc: disable -ftracer for __noclone functions

commit 95272c29378ee7dc15f43fa2758cb28a5913a06d upstream.

-ftracer can duplicate asm blocks causing compilation to fail in
noclone functions.  For example, KVM declares a global variable
in an asm like

    asm("2: ... \n
         .pushsection data \n
         .global vmx_return \n
         vmx_return: .long 2b");

and -ftracer causes a double declaration.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: stable@vger.kernel.org
Cc: kvm@vger.kernel.org
Reported-by: Linda Walsh <lkml@tlinx.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARM: OMAP3: Add cpuidle parameters table for omap3430

commit 98f42221501353067251fbf11e732707dbb68ce3 upstream.

Based on CPU type choose generic omap3 or omap3430 specific cpuidle
parameters. Parameters for omap3430 were measured on Nokia N900 device and
added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters")
which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle -
remove rx51 cpuidle parameters table") due to huge code complexity.

This patch brings cpuidle parameters for omap3430 devices again, but uses
simple condition based on CPU type.

Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle
parameters table")
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

perf stat: Document --detailed option

commit f594bae08183fb6b57db55387794ece3e1edf6f6 upstream.

I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.

Add the text from

  2cba3ffb9a9d ("perf stat: Add -d -d and -d -d -d options to show more CPU events")

which added the incrementing aspect to -d.

Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a9d ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors

commit e513229b4c386e6c9f66298c13fde92f73e6e1ac upstream.

When an SMP Hyper-V guest is running on top of 2012R2 Server and secondary
cpus are sent offline (with echo 0 > /sys/devices/system/cpu/cpu$cpu/online)
the system freeze is observed. This happens due to the fact that on newer
hypervisors (Win8, WS2012R2, ...) vmbus channel handlers are distributed
across all cpus (see init_vp_index() function in drivers/hv/channel_mgmt.c)
and on cpu offlining nobody reassigns them to CPU0. Prevent cpu offlining
when vmbus is loaded until the issue is fixed host-side.

This patch also disables hibernation but it is OK as it is also broken (MCE
error is hit on resume). Suspend still works.

Tested with WS2008R2 and WS2012R2.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
[ 3chas3@gmail.com: rebase to 3.14-stable ]
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

include/linux/poison.h: fix LIST_POISON{1,2} offset

commit 8a5e5e02fc83aaf67053ab53b359af08c6c49aaf upstream.

Poison pointer values should be small enough to find a room in
non-mmap'able/hardly-mmap'able space.  E.g.  on x86 "poison pointer space"
is located starting from 0x0.  Given unprivileged users cannot mmap
anything below mmap_min_addr, it should be safe to use poison pointers
lower than mmap_min_addr.

The current poison pointer values of LIST_POISON{1,2} might be too big for
mmap_min_addr values equal or less than 1 MB (common case, e.g.  Ubuntu
uses only 0x10000).  There is little point to use such a big value given
the "poison pointer space" below 1 MB is not yet exhausted.  Changing it
to a smaller value solves the problem for small mmap_min_addr setups.

The values are suggested by Solar Designer:
http://www.openwall.com/lists/oss-security/2015/05/02/6

Signed-off-by: Vasily Kulikov <segoon@openwall.com>
Cc: Solar Designer <solar@openwall.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors

commit f3df53e4d70b5736368a8fe8aa1bb70c1cb1f577 upstream.

Fix RDAC read back errors caused by a typo. Value must shift by 2.

Fixes: a4bd394956f2 ("drivers/misc/ad525x_dpot.c: new features")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rtc: vr41xx: Wire up alarm_irq_enable

commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream.

drivers/rtc/rtc-vr41xx.c:229: warning: â\80\98vr41xx_rtc_alarm_irq_enableâ\80\99 defined but not used

Apparently the conversion to alarm_irq_enable forgot to wire up the
callback.

Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

misc/bmp085: Enable building as a module

commit 50e6315dba721cbc24ccd6d7b299f1782f210a98 upstream.

Commit 985087dbcb02 'misc: add support for bmp18x chips to the bmp085
driver' changed the BMP085 config symbol to a boolean.  I see no
reason why the shared code cannot be built as a module, so change it
back to tristate.

Fixes: 985087dbcb02 ("misc: add support for bmp18x chips to the bmp085 driver")
Cc: Eric Andersson <eric.andersson@unixphere.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

fbdev: da8xx-fb: fix videomodes of lcd panels

commit 713fced8d10fa1c759c8fb6bf9aaa681bae68cad upstream.

Commit 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the
hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but
forgot to update known_lcd_panels[] which had sync values
according to old logic. This breaks LCD at least on DA850 EVM.

This patch fixes this issue and I have tested this for panel
"Sharp_LK043T1DG01" using DA850 EVM board.

Fixes: 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse")
Signed-off-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

paride: make 'verbose' parameter an 'int' again

commit dec63a4dec2d6d01346fd5d96062e67c0636852b upstream.

gcc-6.0 found an ancient bug in the paride driver, which had a
"module_param(verbose, bool, 0);" since before 2.6.12, but actually uses
it to accept '0', '1' or '2' as arguments:

  drivers/block/paride/pd.c: In function 'pd_init_dev_parms':
  drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare]
   #define DBMSG(msg) ((verbose>1)?(msg):NULL)

In 2012, Rusty did a cleanup patch that also changed the type of the
variable to 'bool', which introduced what is now a gcc warning.

This changes the type back to 'int' and adapts the module_param() line
instead, so it should work as documented in case anyone ever cares about
running the ancient driver with debugging.

Fixes: 90ab5ee94171 ("module_param: make bool parameters really bool (drivers & misc)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rusty Russell <rusty@rustcorp.com.au>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: usbip: fix potential out-of-bounds write

commit b348d7dddb6c4fbfc810b7a0626e8ec9e29f7cbb upstream.

Fix potential out-of-bounds write to urb->transfer_buffer
usbip handles network communication directly in the kernel. When receiving a
packet from its peer, usbip code parses headers according to protocol. As
part of this parsing urb->actual_length is filled. Since the input for
urb->actual_length comes from the network, it should be treated as untrusted.
Any entity controlling the network may put any value in the input and the
preallocated urb->transfer_buffer may not be large enough to hold the data.
Thus, the malicious entity is able to write arbitrary data to kernel memory.

Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

workqueue: fix ghost PENDING flag while doing MQ IO

commit 346c09f80459a3ad97df1816d6d606169a51001a upstream.

The bug in a workqueue leads to a stalled IO request in MQ ctx->rq_list
with the following backtrace:

[  601.347452] INFO: task kworker/u129:5:1636 blocked for more than 120 seconds.
[  601.347574]       Tainted: G           O    4.4.5-1-storage+ #6
[  601.347651] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  601.348142] kworker/u129:5  D ffff880803077988     0  1636      2 0x00000000
[  601.348519] Workqueue: ibnbd_server_fileio_wq ibnbd_dev_file_submit_io_worker [ibnbd_server]
[  601.348999]  ffff880803077988 ffff88080466b900 ffff8808033f9c80 ffff880803078000
[  601.349662]  ffff880807c95000 7fffffffffffffff ffffffff815b0920 ffff880803077ad0
[  601.350333]  ffff8808030779a0 ffffffff815b01d5 0000000000000000 ffff880803077a38
[  601.350965] Call Trace:
[  601.351203]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.351444]  [<ffffffff815b01d5>] schedule+0x35/0x80
[  601.351709]  [<ffffffff815b2dd2>] schedule_timeout+0x192/0x230
[  601.351958]  [<ffffffff812d43f7>] ? blk_flush_plug_list+0xc7/0x220
[  601.352208]  [<ffffffff810bd737>] ? ktime_get+0x37/0xa0
[  601.352446]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.352688]  [<ffffffff815af784>] io_schedule_timeout+0xa4/0x110
[  601.352951]  [<ffffffff815b3a4e>] ? _raw_spin_unlock_irqrestore+0xe/0x10
[  601.353196]  [<ffffffff815b093b>] bit_wait_io+0x1b/0x70
[  601.353440]  [<ffffffff815b056d>] __wait_on_bit+0x5d/0x90
[  601.353689]  [<ffffffff81127bd0>] wait_on_page_bit+0xc0/0xd0
[  601.353958]  [<ffffffff81096db0>] ? autoremove_wake_function+0x40/0x40
[  601.354200]  [<ffffffff81127cc4>] __filemap_fdatawait_range+0xe4/0x140
[  601.354441]  [<ffffffff81127d34>] filemap_fdatawait_range+0x14/0x30
[  601.354688]  [<ffffffff81129a9f>] filemap_write_and_wait_range+0x3f/0x70
[  601.354932]  [<ffffffff811ced3b>] blkdev_fsync+0x1b/0x50
[  601.355193]  [<ffffffff811c82d9>] vfs_fsync_range+0x49/0xa0
[  601.355432]  [<ffffffff811cf45a>] blkdev_write_iter+0xca/0x100
[  601.355679]  [<ffffffff81197b1a>] __vfs_write+0xaa/0xe0
[  601.355925]  [<ffffffff81198379>] vfs_write+0xa9/0x1a0
[  601.356164]  [<ffffffff811c59d8>] kernel_write+0x38/0x50

The underlying device is a null_blk, with default parameters:

  queue_mode    = MQ
  submit_queues = 1

Verification that nullb0 has something inflight:

root@pserver8:~# cat /sys/block/nullb0/inflight
       0        1
root@pserver8:~# find /sys/block/nullb0/mq/0/cpu* -name rq_list -print -exec cat {} \;
...
/sys/block/nullb0/mq/0/cpu2/rq_list
CTX pending:
        ffff8838038e2400
...

During debug it became clear that stalled request is always inserted in
the rq_list from the following path:

   save_stack_trace_tsk + 34
   blk_mq_insert_requests + 231
   blk_mq_flush_plug_list + 281
   blk_flush_plug_list + 199
   wait_on_page_bit + 192
   __filemap_fdatawait_range + 228
   filemap_fdatawait_range + 20
   filemap_write_and_wait_range + 63
   blkdev_fsync + 27
   vfs_fsync_range + 73
   blkdev_write_iter + 202
   __vfs_write + 170
   vfs_write + 169
   kernel_write + 56

So blk_flush_plug_list() was called with from_schedule == true.

If from_schedule is true, that means that finally blk_mq_insert_requests()
offloads execution of __blk_mq_run_hw_queue() and uses kblockd workqueue,
i.e. it calls kblockd_schedule_delayed_work_on().

That means, that we race with another CPU, which is about to execute
__blk_mq_run_hw_queue() work.

Further debugging shows the following traces from different CPUs:

  CPU#0                                  CPU#1
  ----------------------------------     -------------------------------
  reqeust A inserted
  STORE hctx->ctx_map[0] bit marked
  kblockd_schedule...() returns 1
  <schedule to kblockd workqueue>
                                         request B inserted
                                         STORE hctx->ctx_map[1] bit marked
                                         kblockd_schedule...() returns 0
  *** WORK PENDING bit is cleared ***
  flush_busy_ctxs() is executed, but
  bit 1, set by CPU#1, is not observed

As a result request B pended forever.

This behaviour can be explained by speculative LOAD of hctx->ctx_map on
CPU#0, which is reordered with clear of PENDING bit and executed _before_
actual STORE of bit 1 on CPU#1.

The proper fix is an explicit full barrier <mfence>, which guarantees
that clear of PENDING bit is to be executed before all possible
speculative LOADS or STORES inside actual work function.

Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Michael Wang <yun.wang@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

efi: Fix out-of-bounds read in variable_matches()

commit 630ba0cc7a6dbafbdee43795617c872b35cde1b4 upstream.

The variable_matches() function can currently read "var_name[len]", for
example when:

 - var_name[0] == 'a',
 - len == 1
 - match_name points to the NUL-terminated string "ab".

This function is supposed to accept "var_name" inputs that are not
NUL-terminated (hence the "len" parameter"). Document the function, and
access "var_name[*match]" only if "*match" is smaller than "len".

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Matthew Garrett <mjg59@coreos.com>
Cc: Jason Andryuk <jandryuk@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.10+
Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ASoC: s3c24xx: use const snd_soc_component_driver pointer

commit ba4bc32eaa39ba7687f0958ae90eec94da613b46 upstream.

An older patch to convert the API in the s3c i2s driver
ended up passing a const pointer into a function that takes
a non-const pointer, so we now get a warning:

sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe':
sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]

However, the s3c_i2sv2_register_component() function again
passes the pointer into another function taking a const, so
we just need to change its prototype.

Fixes: eca3b01d0885 ("ASoC: switch over to use snd_soc_register_component() on s3c i2s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback

commit c4fc1956fa31003bfbe4f597e359d751568e2954 upstream.

Both of these drivers can return NOTIFY_BAD, but this terminates
processing other callbacks that were registered later on the chain.
Since the driver did nothing to log the error it seems wrong to prevent
other interested parties from seeing it. E.g. neither of them had even
bothered to check the type of the error to see if it was a memory error
before the return NOTIFY_BAD.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

i2c: cpm: Fix build break due to incompatible pointer types

commit 609d5a1b2b35bb62b4b3750396e55453160c2a17 upstream.

Since commit ea8daa7b9784 ("kbuild: Add option to turn incompatible
pointer check into error"), assignments from an incompatible pointer
types have become a hard error, eg:

  drivers/i2c/busses/i2c-cpm.c:545:91: error: passing argument 3 of
  'dma_alloc_coherent' from incompatible pointer type

Fix the build break by converting txdma & rxdma to dma_addr_t.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fixes: ea8daa7b9784
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: gtco - fix crash on detecting device without endpoints

commit 162f98dea487206d9ab79fc12ed64700667a894d upstream.

The gtco driver expects at least one valid endpoint. If given malicious
descriptors that specify 0 for the number of endpoints, it will crash in
the probe function. Ensure there is at least one endpoint on the interface
before using it.

Also let's fix a minor coding style issue.

The full correct report of this issue can be found in the public
Red Hat Bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=1283385

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

nl80211: check netlink protocol in socket release notification

commit 8f815cdde3e550e10c2736990d791f60c2ce43eb upstream.

A non-privileged user can create a netlink socket with the same port_id as
used by an existing open nl80211 netlink socket (e.g. as used by a hostapd
process) with a different protocol number.

Closing this socket will then lead to the notification going to nl80211's
socket release notification handler, and possibly cause an action such as
removing a virtual interface.

Fix this issue by checking that the netlink protocol is NETLINK_GENERIC.
Since generic netlink has no notifier chain of its own, we can't fix the
problem more generically.

Fixes: 026331c4d9b5 ("cfg80211/mac80211: allow registering for and sending action frames")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

crypto: gcm - Fix rfc4543 decryption crash

This bug has already bee fixed upstream since 4.2.  However, it
was fixed during the AEAD conversion so no fix was backported to
the older kernels.

When we do an RFC 4543 decryption, we will end up writing the
ICV beyond the end of the dst buffer.  This should lead to a
crash but for some reason it was never noticed.

This patch fixes it by only writing back the ICV for encryption.

Fixes: d733ac90f9fe ("crypto: gcm - fix rfc4543 to handle async...")
Reported-by: Patrick Meyer <patrick.meyer@vasgard.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: hcd: out of bounds access in for_each_companion

commit e86103a75705c7c530768f4ffaba74cf382910f2 upstream.

On BXT platform Host Controller and Device Controller figure as
same PCI device but with different device function. HCD should
not pass data to Device Controller but only to Host Controllers.
Checking if companion device is Host Controller, otherwise skip.

Cc: <stable@vger.kernel.org>
Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: xhci: fix wild pointers in xhci_mem_cleanup

commit 71504062a7c34838c3fccd92c447f399d3cb5797 upstream.

This patch fixes some wild pointers produced by xhci_mem_cleanup.
These wild pointers will cause system crash if xhci_mem_cleanup()
is called twice.

Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[wt: struct xhci_hcd has no ext_caps members in 3.10 ]

Signed-off-by: Willy Tarreau <w@1wt.eu>

usbvision: fix crash on detecting device with invalid configuration

commit fa52bd506f274b7619955917abfde355e3d19ffe upstream.

The usbvision driver crashes when a specially crafted usb device with invalid
number of interfaces or endpoints is detected. This fix adds checks that the
device has proper configuration expected by the driver.

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usbvision: fix leak of usb_dev on failure paths in usbvision_probe()

commit afd270d1a45043cef14341bcceff62ed50e8dc9a upstream.

There is no usb_put_dev() on failure paths in usbvision_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usbvision-video: fix memory leak of alt_max_pkt_size

commit 090c65b694c362adb19ec9c27de216a808ee443c upstream.

1. usbvision->alt_max_pkt_size is not deallocated anywhere.
2. if allocation of usbvision->alt_max_pkt_size fails,
there is no proper deallocation of already acquired resources.
The patch adds kfree(usbvision->alt_max_pkt_size) to
usbvision_release() as soon as other deallocations happen there.
It calls usbvision_release() if allocation of
usbvision->alt_max_pkt_size fails as soon as usbvision_release()
is safe to work with incompletely initialized usbvision structure.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drm/radeon: hold reference to fences in radeon_sa_bo_new (3.17 and older)

[Backport of upstream commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb, with
 an additional NULL pointer guard that is required for kernels 3.17 and older.

 To be precise, any kernel that does *not* have commit 954605ca3 "drm/radeon:
 use common fence implementation for fences, v4" requires this additional
 NULL pointer guard.]

An arbitrary amount of time can pass between spin_unlock and
radeon_fence_wait_any, so we need to ensure that nobody frees the
fences from under us.

Based on the analogous fix for amdgpu.

Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1 + fix)
Tested-by: Lutz Euler <lutz.euler@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

HID: usbhid: fix inconsistent reset/resume/reset-resume behavior

commit 972e6a993f278b416a8ee3ec65475724fc36feb2 upstream.

The usbhid driver has inconsistently duplicated code in its post-reset,
resume, and reset-resume pathways.

reset-resume doesn't check HID_STARTED before trying to
restart the I/O queues.

resume fails to clear the HID_SUSPENDED flag if HID_STARTED
isn't set.

resume calls usbhid_restart_queues() with usbhid->lock held
and the others call it without holding the lock.

The first item in particular causes a problem following a reset-resume
if the driver hasn't started up its I/O.  URB submission fails because
usbhid->urbin is NULL, and this triggers an unending reset-retry loop.

This patch fixes the problem by creating a new subroutine,
hid_restart_io(), to carry out all the common activities.  It also
adds some checks that were missing in the original code:

After a reset, there's no need to clear any halted endpoints.

After a resume, if a reset is pending there's no need to
restart any I/O until the reset is finished.

After a resume, if the interrupt-IN endpoint is halted there's
no need to submit the input URB until the halt has been
cleared.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Daniel Fraga <fragabr@gmail.com>
Tested-by: Daniel Fraga <fragabr@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ext4: add lockdep annotations for i_data_sem

commit daf647d2dd58cec59570d7698a45b98e580f2076 upstream.

With the internal Quota feature, mke2fs creates empty quota inodes and
quota usage tracking is enabled as soon as the file system is mounted.
Since quotacheck is no longer preallocating all of the blocks in the
quota inode that are likely needed to be written to, we are now seeing
a lockdep false positive caused by needing to allocate a quota block
from inside ext4_map_blocks(), while holding i_data_sem for a data
inode.  This results in this complaint:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&ei->i_data_sem);
                                lock(&s->s_dquot.dqio_mutex);
                                lock(&ei->i_data_sem);
   lock(&s->s_dquot.dqio_mutex);

Google-Bug-Id: 27907753

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer

commit 6490865c67825277b29638e839850882600b48ec upstream.

This patch adds a code to surely disable TX IRQ of the pipe before
starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs
may happen in rare cases when DMAC is used.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()

commit 894f2fc44f2f3f48c36c973b1123f6ab298be160 upstream.

When unexpected situation happened (e.g. tx/rx irq happened while
DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL
pointer dereference like the followings:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in: usb_f_acm u_serial g_serial libcomposite
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63
Hardware name: Generic R8A7790 (Flattened Device Tree)
task: c0729c00 ti: c0724000 task.ti: c0724000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xac/0x118
pc : [<00000000>]    lr : [<c03257e0>]    psr: 60000193
sp : c0725db8  ip : 00000000  fp : c0725df4
r10: 00000001  r9 : 00000193  r8 : ef3ccab4
r7 : ef3cca10  r6 : eea4586c  r5 : 00000000  r4 : ef19ceb4
r3 : 00000000  r2 : 0000009c  r1 : c0725dc4  r0 : ef19ceb4

This patch adds a condition to avoid the dereference.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ip6_tunnel: set rtnl_link_ops before calling register_netdevice

commit b6ee376cb0b7fb4e7e07d6cd248bd40436fb9ba6 upstream.

When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set
before ip6_tnl_create2 is called. When register_netdevice is called, there
is no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipv6: l2tp: fix a potential issue in l2tp_ip6_recv

commit be447f305494e019dfc37ea4cdf3b0e4200b4eba upstream.

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipv4: l2tp: fix a potential issue in l2tp_ip_recv

commit 5745b8232e942abd5e16e85fa9b27cc21324acf0 upstream.

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

qmi_wwan: add "D-Link DWM-221 B1" device id

commit e84810c7b85a2d7897797b3ad3e879168a8e032a upstream.

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ppp: take reference on channels netns

commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89 upstream.

Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.

==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[<      none      >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[<      none      >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[<     inline     >] slab_alloc_node kernel/mm/slub.c:2532
[<     inline     >] slab_alloc kernel/mm/slub.c:2574
[<      none      >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[<     inline     >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[<     inline     >] net_alloc kernel/net/core/net_namespace.c:325
[<      none      >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[<      none      >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[<      none      >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[<      none      >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[<     inline     >] copy_process kernel/kernel/fork.c:1274
[<      none      >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[<     inline     >] SYSC_clone kernel/kernel/fork.c:1832
[<      none      >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[<      none      >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185

INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[<      none      >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[<     inline     >] slab_free kernel/mm/slub.c:2805
[<      none      >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[<     inline     >] net_free kernel/net/core/net_namespace.c:341
[<      none      >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[<      none      >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[<      none      >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[<      none      >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[<      none      >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[<      none      >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200

CPU: 1 PID: 11581 Comm: syz-executor Tainted: G    B           4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
 [<     inline     >] __dump_stack kernel/lib/dump_stack.c:15
 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
 [<     inline     >] print_address_description kernel/mm/kasan/report.c:138
 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
 [<     inline     >] kasan_report kernel/mm/kasan/report.c:259
 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
 [<     inline     >] ? ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
 [<     inline     >] exit_task_work kernel/include/linux/task_work.h:21
 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
 [<     inline     >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
 [<     inline     >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
 [<     inline     >] ? context_switch kernel/kernel/sched/core.c:2807
 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
 [<     inline     >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
 ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

qlge: Fix receive packets drop.

commit 2c9a266afefe137bff06bbe0fc48b4d3b3cb348c upstream.

When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ath9k: fix buffer overrun for ar9287

commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 upstream.

Code that was added back in 2.6.38 has an obvious overflow
when accessing a static array, and at the time it was added
only a code comment was put in front of it as a reminder
to have it reviewed properly.

This has not happened, but gcc-6 now points to the specific
overflow:

drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs':
drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds]
     maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4];
                   ~~~~~~~~~~~~~~~~~~~~~~~~~^~~

It turns out that the correct array length exists in the local
'intercepts' variable of this function, so we can just use that
instead of hardcoding '4', so this patch changes all three
instances to use that variable. The other two instances were
already correct, but it's more consistent this way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

farsync: fix off-by-one bug in fst_add_one

commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 upstream.

gcc-6 finds an out of bounds access in the fst_add_one function
when calculating the end of the mmio area:

drivers/net/wan/farsync.c: In function 'fst_add_one':
drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds]
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                                     ^
include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof'
  __builtin_offsetof(a, b)
                     ^
drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof'
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                     ^~~~~~~~
drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET'
                                  + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]);
                                    ^~~~~~~~~~

The warning is correct, but not critical because this appears
to be a write-only variable that is set by each WAN driver but
never accessed afterwards.

I'm taking the minimal fix here, using the correct pointer by
pointing 'mem_end' to the last byte inside of the register area
as all other WAN drivers do, rather than the first byte outside of
it. An alternative would be to just remove the mem_end member
entirely.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net: Fix use after free in the recvmmsg exit path

commit 34b88a68f26a75e4fded796f1a49c40f82234b7d upstream.

The syzkaller fuzzer hit the following use-after-free:

  Call Trace:
   [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
   [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
   [<     inline     >] SYSC_recvmmsg net/socket.c:2281
   [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
   [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
  arch/x86/entry/entry_64.S:185

And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.

Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541fa ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sh_eth: fix NULL pointer dereference in sh_eth_ring_format()

commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 upstream.

In a low memory situation, if netdev_alloc_skb() fails on a first RX ring
loop iteration  in sh_eth_ring_format(), 'rxdesc' is still NULL.  Avoid
kernel oops by adding the 'rxdesc' check after the loop.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

udp6: fix UDP/IPv6 encap resubmit path

commit 59dca1d8a6725a121dae6c452de0b2611d5865dc upstream.

IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol.  In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.

UDP for IPv6 was unaware of this difference.  Change __udp6_lib_rcv() to
return a positive value for redispatch.  Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.

Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usbnet: cleanup after bind() in probe()

commit 1666984c8625b3db19a9abc298931d35ab7bc64b upstream.

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

cdc_ncm: toggle altsetting to force reset before setup

commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 upstream.

Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time.  Briefly toggling the altsetting forces a function
reset regardless of the initial state.

This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipv6: re-enable fragment header matching in ipv6_find_hdr

commit 5d150a985520bbe3cb2aa1ceef24a7e32f20c15f upstream.

When ipv6_find_hdr is used to find a fragment header
(caller specifies target NEXTHDR_FRAGMENT) we erronously return
-ENOENT for all fragments with nonzero offset.

Before commit 9195bb8e381d, when target was specified, we did not
enter the exthdr walk loop as nexthdr == target so this used to work.

Now we do (so we can skip empty route headers). When we then stumble upon
a frag with nonzero frag_off we must return -ENOENT ("header not found")
only if the caller did not specifically request NEXTHDR_FRAGMENT.

This allows nfables exthdr expression to match ipv6 fragments, e.g. via

nft add rule ip6 filter input frag frag-off gt 0

Fixes: 9195bb8e381d ("ipv6: improve ipv6_find_hdr() to skip empty routing headers")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sctp: lack the check for ports in sctp_v6_cmp_addr

commit 40b4f0fd74e46c017814618d67ec9127ff20f157 upstream.

As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check
the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by
sctp_cmp_addr_exact().

Now sctp_v6_cmp_addr just check the port when two addresses have different
family, and lack the port check for two ipv6 addresses. that will make
sctp_hash_cmp() cannot work well.

so fix it by adding ports comparison in sctp_v6_cmp_addr().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net: jme: fix suspend/resume on JMC260

commit ee50c130c82175eaa0820c96b6d3763928af2241 upstream.

The JMC260 network card fails to suspend/resume because the call to
jme_start_irq() was too early, moving the call to jme_start_irq() after
the call to jme_reset_link() makes it work.

Prior this change suspend/resume would fail unless /sys/power/pm_async=0
was explicitly specified.

Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ALSA: timer: Use mod_timer() for rearming the system timer

commit 4a07083ed613644c96c34a7dd2853dc5d7c70902 upstream.

ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead.  This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup.  However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
 kernel BUG at kernel/time/timer.c:966!
 Call Trace:
  <IRQ>
  [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
  [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
  [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
  [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
  [<ffffffff81296b72>] call_timer_fn+0x162/0x520
  [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
  [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
  ....

It's the place where add_timer() checks the pending timer.  It's clear
that this may happen after the immediate restart without sync in our
cases.

So, the workaround here is just to use mod_timer() instead of
add_timer().  This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

parisc: Fix kernel crash with reversed copy_from_user()

commit ef72f3110d8b19f4c098a0bff7ed7d11945e70c6 upstream.

The kernel module testcase (lib/test_user_copy.c) exhibited a kernel
crash on parisc if the parameters for copy_from_user were reversed
("illegal reversed copy_to_user" testcase).

Fix this potential crash by checking the fault handler if the faulting
address is in the exception table.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

parisc: Avoid function pointers for kernel exception routines

commit e3893027a300927049efc1572f852201eb785142 upstream.

We want to avoid the kernel module loader to create function pointers
for the kernel fixup routines of get_user() and put_user(). Changing
the external reference from function type to int type fixes this.

This unbreaks exception handling for get_user() and put_user() when
called from a kernel module.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>

hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated

commit 3c2e2266a5bd2d1cef258e6e54dca1d99946379f upstream.

arm:pxa_defconfig can result in the following crash if the max1111 driver
is not instantiated.

Unhandled fault: page domain fault (0x01b) at 0x00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: : 1b [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10
Hardware name: SHARP Akita
Workqueue: events sharpsl_charge_toggle
task: c390a000 ti: c391e000 task.ti: c391e000
PC is at max1111_read_channel+0x20/0x30
LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c
pc : [<c03aaab0>]    lr : [<c0024b50>]    psr: 20000013
...
[<c03aaab0>] (max1111_read_channel) from [<c0024b50>]
(sharpsl_pm_pxa_read_max1111+0x2c/0x3c)
[<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>]
(spitzpm_read_devdata+0x5c/0xc4)
[<c00262e0>] (spitzpm_read_devdata) from [<c0024094>]
(sharpsl_check_battery_temp+0x78/0x110)
[<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>]
(sharpsl_charge_toggle+0x48/0x110)
[<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>]
(process_one_work+0x14c/0x48c)
[<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4)
[<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec)
[<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24)

This can occur because the SPI controller driver (SPI_PXA2XX) is built as
module and thus not necessarily loaded. While building SPI_PXA2XX into the
kernel would make the problem disappear, it appears prudent to ensure that
the driver is instantiated before accessing its data structures.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

perf/x86/intel: Fix PEBS data source interpretation on Nehalem/Westmere

commit e17dc65328057c00db7e1bfea249c8771a78b30b upstream.

Jiri reported some time ago that some entries in the PEBS data source table
in perf do not agree with the SDM. We investigated and the bits
changed for Sandy Bridge, but the SDM was not updated.

perf already implements the bits correctly for Sandy Bridge
and later. This patch patches it up for Nehalem and Westmere.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1456871124-15985-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sched/cputime: Fix steal time accounting vs. CPU hotplug

commit e9532e69b8d1d1284e8ecf8d2586de34aec61244 upstream.

On CPU hotplug the steal time accounting can keep a stale rq->prev_steal_time
value over CPU down and up. So after the CPU comes up again the delta
calculation in steal_account_process_tick() wreckages itself due to the
unsigned math:

 u64 steal = paravirt_steal_clock(smp_processor_id());

 steal -= this_rq()->prev_steal_time;

So if steal is smaller than rq->prev_steal_time we end up with an insane large
value which then gets added to rq->prev_steal_time, resulting in a permanent
wreckage of the accounting. As a consequence the per CPU stats in /proc/stat
become stale.

Nice trick to tell the world how idle the system is (100%) while the CPU is
100% busy running tasks. Though we prefer realistic numbers.

None of the accounting values which use a previous value to account for
fractions is reset at CPU hotplug time. update_rq_clock_task() has a sanity
check for prev_irq_time and prev_steal_time_rq, but that sanity check solely
deals with clock warps and limits the /proc/stat visible wreckage. The
prev_time values are still wrong.

Solution is simple: Reset rq->prev_*_time when the CPU is plugged in again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: commit 095c0aa83e52 "sched: adjust scheduler cpu power for stolen time"
Fixes: commit aa483808516c "sched: Remove irq time from available CPU power"
Fixes: commit e6e6685accfa "KVM guest: Steal time accounting"
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603041539490.3686@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mtd: onenand: fix deadlock in onenand_block_markbad

commit 5e64c29e98bfbba1b527b0a164f9493f3db9e8cb upstream.

Commit 5942ddbc500d ("mtd: introduce mtd_block_markbad interface")
incorrectly changed onenand_block_markbad() to call mtd_block_markbad
instead of onenand_chip's block_markbad function. As a result the function
will now recurse and deadlock. Fix by reverting the change.

Fixes: 5942ddbc500d ("mtd: introduce mtd_block_markbad interface")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list

commit be12b299a83fc807bbaccd2bcb8ec50cbb0cb55c upstream.

When master handles convert request, it queues ast first and then
returns status.  This may happen that the ast is sent before the request
status because the above two messages are sent by two threads.  And
right after the ast is sent, if master down, it may trigger BUG in
dlm_move_lockres_to_recovery_list in the requested node because ast
handler moves it to grant list without clear lock->convert_pending.  So
remove BUG_ON statement and check if the ast is processed in
dlmconvert_remote.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ocfs2/dlm: fix race between convert and recovery

commit ac7cf246dfdbec3d8fed296c7bf30e16f5099dac upstream.

There is a race window between dlmconvert_remote and
dlm_move_lockres_to_recovery_list, which will cause a lock with
OCFS2_LOCK_BUSY in grant list, thus system hangs.

dlmconvert_remote
{
        spin_lock(&res->spinlock);
        list_move_tail(&lock->list, &res->converting);
        lock->convert_pending = 1;
        spin_unlock(&res->spinlock);

        status = dlm_send_remote_convert_request();
        >>>>>> race window, master has queued ast and return DLM_NORMAL,
               and then down before sending ast.
               this node detects master down and calls
               dlm_move_lockres_to_recovery_list, which will revert the
               lock to grant list.
               Then OCFS2_LOCK_BUSY won't be cleared as new master won't
               send ast any more because it thinks already be authorized.

        spin_lock(&res->spinlock);
        lock->convert_pending = 0;
        if (status != DLM_NORMAL)
                dlm_revert_pending_convert(res, lock);
        spin_unlock(&res->spinlock);
}

In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set
(res is still in recovering) or res master changed (new master has
finished recovery), reset the status to DLM_RECOVERING, then it will
retry convert.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: ati_remote2 - fix crashes on detecting device with invalid descriptor

commit 950336ba3e4a1ffd2ca60d29f6ef386dd2c7351d upstream.

The ati_remote2 driver expects at least two interfaces with one
endpoint each. If given malicious descriptor that specify one
interface or no endpoints, it will crash in the probe function.
Ensure there is at least two interfaces and one endpoint for each
interface before using it.

The full disclosure: http://seclists.org/bugtraq/2016/Mar/90

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: ims-pcu - sanity check against missing interfaces

commit a0ad220c96692eda76b2e3fd7279f3dcd1d8a8ff upstream.

A malicious device missing interface can make the driver oops.
Add sanity checking.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

scripts/coccinelle: modernize &

commit 1b669e713f277a4d4b3cec84e13d16544ac8286d upstream.

& is no longer allowed in column 0, since Coccinelle 1.0.4.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Tested-by: Nishanth Menon <nm@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tracing: Fix trace_printk() to print when not using bprintk()

commit 3debb0a9ddb16526de8b456491b7db60114f7b5e upstream.

The trace_printk() code will allocate extra buffers if the compile detects
that a trace_printk() is used. To do this, the format of the trace_printk()
is saved to the __trace_printk_fmt section, and if that section is bigger
than zero, the buffers are allocated (along with a message that this has
happened).

If trace_printk() uses a format that is not a constant, and thus something
not guaranteed to be around when the print happens, the compiler optimizes
the fmt out, as it is not used, and the __trace_printk_fmt section is not
filled. This means the kernel will not allocate the special buffers needed
for the trace_printk() and the trace_printk() will not write anything to the
tracing buffer.

Adding a "__used" to the variable in the __trace_printk_fmt section will
keep it around, even though it is set to NULL. This will keep the string
from being printed in the debugfs/tracing/printk_formats section as it is
not needed.

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 07d777fe8c398 "tracing: Add percpu buffers for trace_printk()"
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tracing: Fix crash from reading trace_pipe with sendfile

commit a29054d9478d0435ab01b7544da4f674ab13f533 upstream.

If tracing contains data and the trace_pipe file is read with sendfile(),
then it can trigger a NULL pointer dereference and various BUG_ON within the
VM code.

There's a patch to fix this in the splice_to_pipe() code, but it's also a
good idea to not let that happen from trace_pipe either.

Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in
Cc: stable@vger.kernel.org # 2.6.30+
Reported-by: Rabin Vincent <rabin.vincent@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tracing: Have preempt(irqs)off trace preempt disabled functions

commit cb86e05390debcc084cfdb0a71ed4c5dbbec517d upstream.

Joel Fernandes reported that the function tracing of preempt disabled
sections was not being reported when running either the preemptirqsoff or
preemptoff tracers. This was due to the fact that the function tracer
callback for those tracers checked if irqs were disabled before tracing. But
this fails when we want to trace preempt off locations as well.

Joel explained that he wanted to see funcitons where interrupts are enabled
but preemption was disabled. The expected output he wanted:

   <...>-2265    1d.h1 3419us : preempt_count_sub <-irq_exit
   <...>-2265    1d..1 3419us : __do_softirq <-irq_exit
   <...>-2265    1d..1 3419us : msecs_to_jiffies <-__do_softirq
   <...>-2265    1d..1 3420us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d..1 3420us : __local_bh_disable_ip <-__do_softirq
   <...>-2265    1..s1 3421us : run_timer_softirq <-__do_softirq
   <...>-2265    1..s1 3421us : hrtimer_run_pending <-run_timer_softirq
   <...>-2265    1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq
   <...>-2265    1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq
   <...>-2265    1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq
   <...>-2265    1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq
   <...>-2265    1..s1 3423us : rcu_bh_qs <-__do_softirq
   <...>-2265    1d.s1 3423us : irqtime_account_irq <-__do_softirq
   <...>-2265    1d.s1 3423us : __local_bh_enable <-__do_softirq

There's a comment saying that the irq disabled check is because there's a
possible race that tracing_cpu may be set when the function is executed. But
I don't remember that race. For now, I added a check for preemption being
enabled too to not record the function, as there would be no race if that
was the case. I need to re-investigate this, as I'm now thinking that the
tracing_cpu will always be correct. But no harm in keeping the check for
now, except for the slight performance hit.

Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com
Fixes: 5e6d2b9cfa3a "tracing: Use one prologue for the preempt irqs off tracer function tracers"
Cc: stable@vget.kernel.org # 2.6.37+
Reported-by: Joel Fernandes <agnel.joel@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.

commit 459ee1c3fd097ab56ababd8ff4bb7ef6a792de33 upstream.

As observed on Apple iMac10,1, DCE-3.2, RV-730,
link rate of 2.7 Ghz is not selected, because
the args.v1.ucConfig flag setting for 2.7 Ghz
gets overwritten by a following assignment of
the transmitter to use.

Move link rate setup a few lines down to fix this.
In practice this didn't have any positive or
negative effect on display setup on the tested
iMac10,1 so i don't know if backporting to stable
makes sense or not.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipr: Fix regression when loading firmware

commit 21b81716c6bff24cda52dc75588455f879ddbfe9 upstream.

Commit d63c7dd5bcb9 ("ipr: Fix out-of-bounds null overwrite") removed
the end of line handling when storing the update_fw sysfs attribute.
This changed the userpace API because it started refusing writes
terminated by a line feed, which broke the update tools we already have.

This patch re-adds that handling, so both a write terminated by a line
feed or not can make it through with the update.

Fixes: d63c7dd5bcb9 ("ipr: Fix out-of-bounds null overwrite")
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Insu Yun <wuninsu@gmail.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipr: Fix out-of-bounds null overwrite

commit d63c7dd5bcb9441af0526d370c43a65ca2c980d9 upstream.

Return value of snprintf is not bound by size value, 2nd argument.
(https://www.kernel.org/doc/htmldocs/kernel-api/API-snprintf.html).
Return value is number of printed chars, can be larger than 2nd
argument.  Therefore, it can write null byte out of bounds ofbuffer.
Since snprintf puts null, it does not need to put additional null byte.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rapidio/rionet: fix deadlock on SMP

commit 36915976eca58f2eefa040ba8f9939672564df61 upstream.

Fix deadlocking during concurrent receive and transmit operations on SMP
platforms caused by the use of incorrect lock: on transmit 'tx_lock'
spinlock should be used instead of 'lock' which is used for receive
operation.

This fix is applicable to kernel versions starting from v2.15.

Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

md/raid5: Compare apples to apples (or sectors to sectors)

commit e7597e69dec59b65c5525db1626b9d34afdfa678 upstream.

'max_discard_sectors' is in sectors, while 'stripe' is in bytes.

This fixes the problem where DISCARD would get disabled on some larger
RAID5 configurations (6 or more drives in my testing), while it worked
as expected with smaller configurations.

Fixes: 620125f2bf8 ("MD: raid5 trim support")
Cc: stable@vger.kernel.org v3.7+
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xtensa: clear all DBREAKC registers on start

commit 7de7ac785ae18a2cdc78d7560f48e3213d9ea0ab upstream.

There are XCHAL_NUM_DBREAK registers, clear them all.
This also fixes cryptic assembler error message with binutils 2.25 when
XCHAL_NUM_DBREAK is 0:

  as: out of memory allocating 18446744073709551575 bytes after a total
  of 495616 bytes

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xtensa: ISS: don't hang if stdin EOF is reached

commit 362014c8d9d51d504c167c44ac280169457732be upstream.

Simulator stdin may be connected to a file, when its end is reached
kernel hangs in infinite loop inside rs_poll, because simc_poll always
signals that descriptor 0 is readable and simc_read always returns 0.
Check simc_read return value and exit loop if it's not positive. Also
don't rewind polling timer if it's zero.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

splice: handle zero nr_pages in splice_to_pipe()

commit d6785d9152147596f60234157da2b02540c3e60f upstream.

Running the following command:

 busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null

with any tracing enabled pretty very quickly leads to various NULL
pointer dereferences and VM BUG_ON()s, such as these:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40
 Call Trace:
  [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
  [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
  [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
  [<ffffffff81196869>] do_sendfile+0x199/0x380
  [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
  [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d

 page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
 kernel BUG at include/linux/mm.h:367!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40
 Call Trace:
  [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
  [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
  [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
  [<ffffffff81196869>] do_sendfile+0x199/0x380
  [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
  [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89

(busybox's cat uses sendfile(2), unlike the coreutils version)

This is because tracing_splice_read_pipe() can call splice_to_pipe()
with spd->nr_pages == 0.  spd_pages underflows in splice_to_pipe() and
we fill the page pointers and the other fields of the pipe_buffers with
garbage.

All other callers of splice_to_pipe() avoid calling it when nr_pages ==
0, and we could make tracing_splice_read_pipe() do that too, but it
seems reasonable to have splice_to_page() handle this condition
gracefully.

Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>

watchdog: rc32434_wdt: fix ioctl error handling

commit 10e7ac22cdd4d211cef99afcb9371b70cb175be6 upstream.

Calling return copy_to_user(...) in an ioctl will not do the right thing
if there's a pagefault: copy_to_user returns the number of bytes not
copied in this case.

Fix up watchdog/rc32434_wdt to do
return copy_to_user(...)) ?  -EFAULT : 0;

instead.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Willy Tarreau <w@1wt.eu>

bcache: fix cache_set_flush() NULL pointer dereference on OOM

commit f8b11260a445169989d01df75d35af0f56178f95 upstream.

When bch_cache_set_alloc() fails to kzalloc the cache_set, the
asyncronous closure handling tries to dereference a cache_set that
hadn't yet been allocated inside of cache_set_flush() which is called
by __cache_set_unregister() during cleanup.  This appears to happen only
during an OOM condition on bcache_register.

Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path

commit c0a2ad9b50dd80eeccd73d9ff962234590d5ec93 upstream.

On umount path, jbd2_journal_destroy() writes latest transaction ID
(->j_tail_sequence) to be used at next mount.

The bug is that ->j_tail_sequence is not holding latest transaction ID
in some cases. So, at next mount, there is chance to conflict with
remaining (not overwritten yet) transactions.

mount (id=10)
write transaction (id=11)
write transaction (id=12)
umount (id=10) <= the bug doesn't write latest ID

mount (id=10)
write transaction (id=11)
crash

mount
[recovery process]
transaction (id=11)
transaction (id=12) <= valid transaction ID, but old commit
                                       must not replay

Like above, this bug become the cause of recovery failure, or FS
corruption.

So why ->j_tail_sequence doesn't point latest ID?

Because if checkpoint transactions was reclaimed by memory pressure
(i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated.
(And another case is, __jbd2_journal_clean_checkpoint_list() is called
with empty transaction.)

So in above cases, ->j_tail_sequence is not pointing latest
transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not
done too.

So, to fix this problem with minimum changes, this patch updates
->j_tail_sequence, and issue REQ_FLUSH.  (With more complex changes,
some optimizations would be possible to avoid unnecessary REQ_FLUSH
for example though.)

BTW,

journal->j_tail_sequence =
++journal->j_transaction_sequence;

Increment of ->j_transaction_sequence seems to be unnecessary, but
ext3 does this.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>

ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.

commit 4061db03dd71d195b9973ee466f6ed32f6a3fc16 upstream.

The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41
will often fail, so add a quirk entry to fix it.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32

commit 7df5ab8774aa383c6d2bff00688d004585d96dfd upstream.

In v4l2-compliance utility, test QUERYBUF required correct length
value to go through each planar to check planar's length in
multi-planar buffer type

Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.7 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

bttv: Width must be a multiple of 16 when capturing planar formats

commit 5c915c68763889f0183a1cc61c84bb228b60124a upstream.

On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max
size results in a solid green rectangle being captured (all colors 0 in
YUV).

This turns out to be caused by max-width (924) not being a multiple of 16.

We've likely never hit this problem before since normally xawtv / tvtime,
etc. will prefer packed pixel formats. But when using a video card which
is using xf86-video-modesetting + glamor, only planar XVideo fmts are
available, and xawtv will chose a matching capture format to avoid needing
to do conversion, triggering the solid green window problem.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

8250: use callbacks to access UART_DLL/UART_DLM

commit 0b41ce991052022c030fd868e03877700220b090 upstream.

Some UART HW has a single register combining UART_DLL/UART_DLM
(this was probably forgotten in the change that introduced the
callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9)

Fixes: b32b19b8ffc0 ("[SERIAL] 8250: set divisor register correctly ...")

Signed-off-by: Sebastian Frias <sf84@laposte.net>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net: irda: Fix use-after-free in irtty_open()

commit 401879c57f01cbf2da204ad2e8db910525c6dbea upstream.

The N_IRDA line discipline may access the previous line discipline's closed
and already-fre private data on open [1].

The tty->disc_data field _never_ refers to valid data on entry to the
line discipline's open() method. Rather, the ldisc is expected to
initialize that field for its own use for the lifetime of the instance
(ie. from open() to close() only).

[1]
    ==================================================================
    BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068
    Read of size 4 by task a.out/13960
    =============================================================================
    BUG kmalloc-512 (Tainted: G    B          ): kasan: bad access detected
    -----------------------------------------------------------------------------
    ...
    Call Trace:
     [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279
     [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436
     [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447
     [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567
     [<     inline     >] tiocsetd drivers/tty/tty_io.c:2650
     [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883
     [<     inline     >] vfs_ioctl fs/ioctl.c:43
     [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607
     [<     inline     >] SYSC_ioctl fs/ioctl.c:622
     [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613
     [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a

Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: powermate - fix oops with malicious USB descriptors

commit 9c6ba456711687b794dcf285856fc14e2c76074f upstream.

The powermate driver expects at least one valid USB endpoint in its
probe function.  If given malicious descriptors that specify 0 for
the number of endpoints, it will crash.  Validate the number of
endpoints on the interface before using them.

The full report for this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/85

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

pwc: Add USB id for Philips Spc880nc webcam

commit 7445e45d19a09e5269dc85f17f9635be29d2f76c upstream.

SPC 880NC PC camera discussions:
http://www.pclinuxos.com/forum/index.php/topic,135688.0.html

Cc: stable@vger.kernel.org
Reported-by: Kikim <klucznik0@op.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: option: add "D-Link DWM-221 B1" device id

commit d48d5691ebf88a15d95ba96486917ffc79256536 upstream.

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: serial: cp210x: Adding GE Healthcare Device ID

commit cddc9434e3dcc37a85c4412fb8e277d3a582e456 upstream.

The CP2105 is used in the GE Healthcare Remote Alarm Box, with the
Manufacturer ID of 0x1901 and Product ID of 0x0194.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: cypress_m8: add endpoint sanity check

commit c55aee1bf0e6b6feec8b2927b43f7a09a6d5f754 upstream.

An attack using missing endpoints exists.

CVE-2016-3137

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: digi_acceleport: do sanity checking for the number of ports

commit 5a07975ad0a36708c6b0a5b9fea1ff811d0b0c1f upstream.

The driver can be crashed with devices that expose crafted descriptors
with too few endpoints.

See: http://seclists.org/bugtraq/2016/Mar/61

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
[johan: fix OOB endpoint check and add error messages ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: mct_u232: add sanity checking in probe

commit 4e9a0b05257f29cf4b75f3209243ed71614d062e upstream.

An attack using the lack of sanity checking in probe is known. This
patch checks for the existence of a second port.

CVE-2016-3136

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
[johan: add error message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: usb_driver_claim_interface: add sanity checking

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: iowarrior: fix oops with malicious USB descriptors

commit 4ec0ef3a82125efc36173062a50624550a900ae0 upstream.

The iowarrior driver expects at least one valid endpoint.  If given
malicious descriptors that specify 0 for the number of endpoints,
it will crash in the probe function.  Ensure there is at least
one endpoint on the interface before using it.

The full report of this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/87

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

USB: cdc-acm: more sanity checking

commit 8835ba4a39cf53f705417b3b3a94eb067673f2c9 upstream.

An attack has become available which pretends to be a quirky
device circumventing normal sanity checks and crashes the kernel
by an insufficient number of interfaces. This patch adds a check
to the code path for quirky devices.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

usb: retry reset if a device times out

commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream.

Some devices I got show an inability to operate right after
power on if they are already connected. They are beyond recovery
if the descriptors are requested multiple times. So in case of
a timeout we rather bail early and reset again. But it must be
done only on the first loop lest we get into a reset/time out
spiral that can be overcome with a retry.

This patch is a rework of a patch that fell through the cracks.
http://www.spinics.net/lists/linux-usb/msg103263.html

Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>