}
/* FIXME implement these protocol options!! */
- if (xfer->speed_hz) {
- dev_dbg(&spi->dev, "no protocol options yet\n");
+ if (xfer->speed_hz < spi->max_speed_hz) {
+ dev_dbg(&spi->dev, "can't change speed in transfer\n");
return -ENOPROTOOPT;
}
},
{ },
};
-MODULE_DEVICE_TABLE(of, davini_spi_of_match);
+MODULE_DEVICE_TABLE(of, davinci_spi_of_match);
/**
* spi_davinci_get_pdata - Get platform data from DTS binding
spi->dev.parent = &master->dev;
spi->dev.bus = &spi_bus_type;
spi->dev.release = spidev_release;
- spi->cs_gpio = -EINVAL;
+ spi->cs_gpio = -ENOENT;
device_initialize(&spi->dev);
return spi;
}
nb = of_gpio_named_count(np, "cs-gpios");
master->num_chipselect = max(nb, (int)master->num_chipselect);
- if (nb < 1)
+ /* Return error only for an incorrectly formed cs-gpios property */
+ if (nb == 0 || nb == -ENOENT)
return 0;
+ else if (nb < 0)
+ return nb;
cs = devm_kzalloc(&master->dev,
sizeof(int) * master->num_chipselect,
return -ENOMEM;
for (i = 0; i < master->num_chipselect; i++)
- cs[i] = -EINVAL;
+ cs[i] = -ENOENT;
for (i = 0; i < nb; i++)
cs[i] = of_get_named_gpio(np, "cs-gpios", i);
* @modalias: Name of the driver to use with this device, or an alias
* for that name. This appears in the sysfs "modalias" attribute
* for driver coldplugging, and in uevents used for hotplugging
- * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
+ * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when
* when not using a GPIO line)
*
* A @spi_device is used to interchange data between an SPI slave
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
- * number. Any individual value may be -EINVAL for CS lines that
+ * number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
*
* Each SPI master controller can communicate with one or more @spi_device