ARM: mach-shmobile: Initial AG5 and AG5EVM support
authorMagnus Damm <damm@opensource.se>
Wed, 17 Nov 2010 10:59:31 +0000 (10:59 +0000)
committerPaul Mundt <lethal@linux-sh.org>
Thu, 18 Nov 2010 06:45:21 +0000 (15:45 +0900)
This patch adds initial support for Renesas SH-Mobile AG5.

At this point the AG5 CPU support is limited to the ARM
core, SCIF serial and a CMT timer together with L2 cache
and the GIC. The AG5EVM board also supports Ethernet.

Future patches will add support for GPIO, INTCS, CPGA
and platform data / driver updates for devices such as
IIC, LCDC, FSI, KEYSC, CEU and SDHI among others.

The code in entry-macro.S will be cleaned up when the
ARM IRQ demux code improvements have been merged.

Depends on the AG5EVM mach-type recently registered but
not yet present in arch/arm/tools/mach-types.

As the AG5EVM board comes with 512MiB memory it is
recommended to turn on HIGHMEM.

Many thanks to Yoshii-san for initial bring up.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
arch/arm/mach-shmobile/Kconfig
arch/arm/mach-shmobile/Makefile
arch/arm/mach-shmobile/board-ag5evm.c [new file with mode: 0644]
arch/arm/mach-shmobile/clock-sh73a0.c [new file with mode: 0644]
arch/arm/mach-shmobile/include/mach/common.h
arch/arm/mach-shmobile/include/mach/entry-macro.S
arch/arm/mach-shmobile/include/mach/irqs.h
arch/arm/mach-shmobile/include/mach/sh73a0.h [new file with mode: 0644]
arch/arm/mach-shmobile/setup-sh73a0.c [new file with mode: 0644]
arch/arm/mm/Kconfig
drivers/serial/sh-sci.h

index cc543430170f20dd0269f2a4e9089c4551cda765..e397a92888f229ed553219883cabb5d241b94d38 100644 (file)
@@ -20,6 +20,12 @@ config ARCH_SH7372
        select SH_CLK_CPG
        select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config ARCH_SH73A0
+       bool "SH-Mobile AG5 (R8A73A00)"
+       select CPU_V7
+       select SH_CLK_CPG
+       select ARM_GIC
+
 comment "SH-Mobile Board Type"
 
 config MACH_G3EVM
@@ -51,6 +57,10 @@ config AP4EVB_WVGA
 
 endchoice
 
+config MACH_AG5EVM
+       bool "AG5EVM board"
+       depends on ARCH_SH73A0
+
 comment "SH-Mobile System Configuration"
 
 menu "Memory configuration"
@@ -60,6 +70,7 @@ config MEMORY_START
        default "0x50000000" if MACH_G3EVM
        default "0x40000000" if MACH_G4EVM
        default "0x40000000" if MACH_AP4EVB
+       default "0x40000000" if MACH_AG5EVM
        default "0x00000000"
        ---help---
          Tweak this only when porting to a new machine which does not
@@ -71,6 +82,7 @@ config MEMORY_SIZE
        default "0x08000000" if MACH_G3EVM
        default "0x08000000" if MACH_G4EVM
        default "0x10000000" if MACH_AP4EVB
+       default "0x20000000" if MACH_AG5EVM
        default "0x04000000"
        help
          This sets the default memory size assumed by your kernel. It can
index ae416fe7daf2e61b09f683c9be36ebc57c105c62..7a8705ef6d8f781c33ccf85eb24f0c872c90eccd 100644 (file)
@@ -9,6 +9,7 @@ obj-y                           := timer.o console.o clock.o pm_runtime.o
 obj-$(CONFIG_ARCH_SH7367)      += setup-sh7367.o clock-sh7367.o intc-sh7367.o
 obj-$(CONFIG_ARCH_SH7377)      += setup-sh7377.o clock-sh7377.o intc-sh7377.o
 obj-$(CONFIG_ARCH_SH7372)      += setup-sh7372.o clock-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)      += setup-sh73a0.o clock-sh73a0.o
 
 # Pinmux setup
 pfc-$(CONFIG_ARCH_SH7367)      := pfc-sh7367.o
@@ -20,3 +21,4 @@ obj-$(CONFIG_GENERIC_GPIO)    += $(pfc-y)
 obj-$(CONFIG_MACH_G3EVM)       += board-g3evm.o
 obj-$(CONFIG_MACH_G4EVM)       += board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)      += board-ap4evb.o
+obj-$(CONFIG_MACH_AG5EVM)      += board-ag5evm.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
new file mode 100644 (file)
index 0000000..bade04a
--- /dev/null
@@ -0,0 +1,159 @@
+/*
+ * arch/arm/mach-shmobile/board-ag5evm.c
+ *
+ * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_sci.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+static struct resource smsc9220_resources[] = {
+       [0] = {
+               .start          = 0x14000000,
+               .end            = 0x14000000 + SZ_64K - 1,
+               .flags          = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start          = gic_spi(33), /* PINT1 */
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+       .flags          = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+       .phy_interface  = PHY_INTERFACE_MODE_MII,
+       .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+       .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+       .name           = "smsc911x",
+       .id             = 0,
+       .dev  = {
+               .platform_data = &smsc9220_platdata,
+       },
+       .resource       = smsc9220_resources,
+       .num_resources  = ARRAY_SIZE(smsc9220_resources),
+};
+
+static struct platform_device *ag5evm_devices[] __initdata = {
+       &eth_device,
+};
+
+static struct map_desc ag5evm_io_desc[] __initdata = {
+       /* create a 1:1 entity map for 0xe6xxxxxx
+        * used by CPGA, INTC and PFC.
+        */
+       {
+               .virtual        = 0xe6000000,
+               .pfn            = __phys_to_pfn(0xe6000000),
+               .length         = 256 << 20,
+               .type           = MT_DEVICE_NONSHARED
+       },
+};
+
+static void __init ag5evm_map_io(void)
+{
+       iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+
+       /* setup early devices and console here as well */
+       sh73a0_add_early_devices();
+       shmobile_setup_console();
+}
+
+#define PINTC_ADDR     0xe6900000
+#define PINTER0A       (PINTC_ADDR + 0xa0)
+#define PINTCR0A       (PINTC_ADDR + 0xb0)
+
+void __init ag5evm_init_irq(void)
+{
+       /* setup PINT: enable PINTA2 as active low */
+       __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
+       __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
+
+       gic_dist_init(0, __io(0xf0001000), 29);
+       gic_cpu_init(0, __io(0xf0000100));
+}
+
+#define PORT144CR 0xe6052090
+#define PORT145CR 0xe6052091
+
+#define PORT154CR 0xe605209a
+#define PORT155CR 0xe605209b
+#define PORT156CR 0xe605209c
+#define PORT157CR 0xe605209d
+
+#define PORTR159_128DR 0xe6056004
+
+static void __init ag5evm_init(void)
+{
+       /* enable SCIFA2 */
+       __raw_writeb(0x12, PORT154CR); /* TXD */
+       __raw_writeb(0x22, PORT155CR); /* RXD */
+       __raw_writeb(0x12, PORT156CR); /* RTS */
+       __raw_writeb(0x22, PORT157CR); /* CTS */
+
+       /* enable SMSC911X */
+       __raw_writeb(0x20, PORT144CR); /* PINTA2 */
+       __raw_writeb(0x10, PORT145CR); /* RESET */
+       __raw_writel(__raw_readl(PORTR159_128DR) & ~(1 << 17), PORTR159_128DR);
+
+#ifdef CONFIG_CACHE_L2X0
+       /* Shared attribute override enable, 64K*8way */
+       l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);
+#endif
+       sh73a0_add_standard_devices();
+       platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
+}
+
+static void __init ag5evm_timer_init(void)
+{
+       sh73a0_clock_init();
+       shmobile_timer.init();
+       return;
+}
+
+struct sys_timer ag5evm_timer = {
+       .init   = ag5evm_timer_init,
+};
+
+MACHINE_START(AG5EVM, "ag5evm")
+       .map_io         = ag5evm_map_io,
+       .init_irq       = ag5evm_init_irq,
+       .init_machine   = ag5evm_init,
+       .timer          = &ag5evm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
new file mode 100644 (file)
index 0000000..f2390ae
--- /dev/null
@@ -0,0 +1,101 @@
+/*
+ * sh73a0 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+#define SMSTPCR0       0xe6150130
+#define SMSTPCR1       0xe6150134
+#define SMSTPCR2       0xe6150138
+#define SMSTPCR3       0xe615013c
+#define SMSTPCR4       0xe6150140
+#define SMSTPCR5       0xe6150144
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+       .rate           = 32768,
+};
+
+/* Temporarily fixed 48 MHz SUB clock */
+static struct clk sub_clk = {
+       .rate           = 48000000,
+};
+
+static struct clk *main_clks[] = {
+       &r_clk,
+       &sub_clk,
+};
+
+enum { MSTP219,
+       MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP331, MSTP329,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+       SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+       [MSTP219] = MSTP(&sub_clk, SMSTPCR2, 19, 0), /* SCIFA7 */
+       [MSTP207] = MSTP(&sub_clk, SMSTPCR2, 7, 0), /* SCIFA5 */
+       [MSTP206] = MSTP(&sub_clk, SMSTPCR2, 6, 0), /* SCIFB */
+       [MSTP204] = MSTP(&sub_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+       [MSTP203] = MSTP(&sub_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+       [MSTP202] = MSTP(&sub_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+       [MSTP201] = MSTP(&sub_clk, SMSTPCR2, 1, 0), /* SCIFA3 */
+       [MSTP200] = MSTP(&sub_clk, SMSTPCR2, 0, 0), /* SCIFA4 */
+       [MSTP331] = MSTP(&sub_clk, SMSTPCR3, 31, 0), /* SCIFA6 */
+       [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+};
+
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+       /* MSTP32 clocks */
+       CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+       CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+       CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+       CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+       CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+       CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+       CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+       CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+       CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+       CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+};
+
+void __init sh73a0_clock_init(void)
+{
+       int k, ret = 0;
+
+       for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+               ret = clk_register(main_clks[k]);
+
+       if (!ret)
+               ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+       clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+       if (!ret)
+               clk_init();
+       else
+               panic("failed to setup sh73a0 clocks\n");
+}
index efeef778a875fa0f20c934090f6fc6fda1663862..f1dbcdca61ba9201a52085b92bc05debae76eb80 100644 (file)
@@ -30,4 +30,8 @@ extern void sh7372_pinmux_init(void);
 extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
+extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_clock_init(void);
+
 #endif /* __ARCH_MACH_COMMON_H */
index a285d13c74165a2e73a3941a7d1d47d03b91b8ac..c0c264366d7ac4788aaee9d4001b1a65ca614760 100644 (file)
@@ -20,6 +20,7 @@
        .macro  disable_fiq
        .endm
 
+#if !defined(CONFIG_ARCH_SH73A0)
        .macro  get_irqnr_preamble, base, tmp
        ldr     \base, =INTFLGA
        .endm
 
 1000:
        .endm
+#else
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware/gic.h>
+
+       .macro  get_irqnr_preamble, base, tmp
+       ldr     \base, =(0xf0000100)
+       .endm
+
+       .macro  arch_ret_to_user, tmp1, tmp2
+       .endm
+
+/*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec.  To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local.  We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt.  We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+       .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+       ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+       /* bits 12-10 = src CPU, 9-0 = int # */
+
+       ldr     \tmp, =1021
+       bic     \irqnr, \irqstat, #0x1c00
+       cmp     \irqnr, #29
+       cmpcc   \irqnr, \irqnr
+       cmpne   \irqnr, \tmp
+       cmpcs   \irqnr, \irqnr
+
+       .endm
+
+       /* We assume that irqstat (the raw value of the IRQ acknowledge
+        * register) is preserved from the macro above.
+        * If there is an IPI, we immediately signal end of interrupt on the
+        * controller, since this requires the original irqstat value which
+        * we won't easily be able to recreate later.
+        */
+
+       .macro test_for_ipi, irqnr, irqstat, base, tmp
+       bic     \irqnr, \irqstat, #0x1c00
+       cmp     \irqnr, #16
+       strcc   \irqstat, [\base, #GIC_CPU_EOI]
+       cmpcs   \irqnr, \irqnr
+       .endm
+
+       /* As above, this assumes that irqstat and base are preserved.. */
+
+       .macro test_for_ltirq, irqnr, irqstat, base, tmp
+       bic     \irqnr, \irqstat, #0x1c00
+       mov     \tmp, #0
+       cmp     \irqnr, #29
+       moveq   \tmp, #1
+       streq   \irqstat, [\base, #GIC_CPU_EOI]
+       cmp     \tmp, #0
+       .endm
+#endif
index fa15b5f8a001127ca114b3fef16c39984adf88e1..09e0ab7d343ee0293a80f532fb0577b682f0ed50 100644 (file)
@@ -3,6 +3,9 @@
 
 #define NR_IRQS         512
 
+/* GIC */
+#define gic_spi(nr)            ((nr) + 32)
+
 /* INTCA */
 #define evt2irq(evt)           (((evt) >> 5) - 16)
 #define irq2evt(irq)           (((irq) + 16) << 5)
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
new file mode 100644 (file)
index 0000000..5d691fe
--- /dev/null
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH73A0_H__
+#define __ASM_SH73A0_H__
+
+/* This will soon be replaced by pinmux enums */
+
+#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
new file mode 100644 (file)
index 0000000..0bc1106
--- /dev/null
@@ -0,0 +1,234 @@
+/*
+ * sh73a0 processor support
+ *
+ * Copyright (C) 2010  Takashi Yoshii
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+       .mapbase        = 0xe6c40000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(72), gic_spi(72),
+                           gic_spi(72), gic_spi(72) },
+};
+
+static struct platform_device scif0_device = {
+       .name           = "sh-sci",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &scif0_platform_data,
+       },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+       .mapbase        = 0xe6c50000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(73), gic_spi(73),
+                           gic_spi(73), gic_spi(73) },
+};
+
+static struct platform_device scif1_device = {
+       .name           = "sh-sci",
+       .id             = 1,
+       .dev            = {
+               .platform_data  = &scif1_platform_data,
+       },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+       .mapbase        = 0xe6c60000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(74), gic_spi(74),
+                           gic_spi(74), gic_spi(74) },
+};
+
+static struct platform_device scif2_device = {
+       .name           = "sh-sci",
+       .id             = 2,
+       .dev            = {
+               .platform_data  = &scif2_platform_data,
+       },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+       .mapbase        = 0xe6c70000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(75), gic_spi(75),
+                           gic_spi(75), gic_spi(75) },
+};
+
+static struct platform_device scif3_device = {
+       .name           = "sh-sci",
+       .id             = 3,
+       .dev            = {
+               .platform_data  = &scif3_platform_data,
+       },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+       .mapbase        = 0xe6c80000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(78), gic_spi(78),
+                           gic_spi(78), gic_spi(78) },
+};
+
+static struct platform_device scif4_device = {
+       .name           = "sh-sci",
+       .id             = 4,
+       .dev            = {
+               .platform_data  = &scif4_platform_data,
+       },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+       .mapbase        = 0xe6cb0000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(79), gic_spi(79),
+                           gic_spi(79), gic_spi(79) },
+};
+
+static struct platform_device scif5_device = {
+       .name           = "sh-sci",
+       .id             = 5,
+       .dev            = {
+               .platform_data  = &scif5_platform_data,
+       },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+       .mapbase        = 0xe6cc0000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(156), gic_spi(156),
+                           gic_spi(156), gic_spi(156) },
+};
+
+static struct platform_device scif6_device = {
+       .name           = "sh-sci",
+       .id             = 6,
+       .dev            = {
+               .platform_data  = &scif6_platform_data,
+       },
+};
+
+static struct plat_sci_port scif7_platform_data = {
+       .mapbase        = 0xe6cd0000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFA,
+       .irqs           = { gic_spi(143), gic_spi(143),
+                           gic_spi(143), gic_spi(143) },
+};
+
+static struct platform_device scif7_device = {
+       .name           = "sh-sci",
+       .id             = 7,
+       .dev            = {
+               .platform_data  = &scif7_platform_data,
+       },
+};
+
+static struct plat_sci_port scif8_platform_data = {
+       .mapbase        = 0xe6c30000,
+       .flags          = UPF_BOOT_AUTOCONF,
+       .type           = PORT_SCIFB,
+       .irqs           = { gic_spi(80), gic_spi(80),
+                           gic_spi(80), gic_spi(80) },
+};
+
+static struct platform_device scif8_device = {
+       .name           = "sh-sci",
+       .id             = 8,
+       .dev            = {
+               .platform_data  = &scif8_platform_data,
+       },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+       .name = "CMT10",
+       .channel_offset = 0x10,
+       .timer_bit = 0,
+       .clockevent_rating = 125,
+       .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+       [0] = {
+               .name   = "CMT10",
+               .start  = 0xe6138010,
+               .end    = 0xe613801b,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = gic_spi(65),
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device cmt10_device = {
+       .name           = "sh_cmt",
+       .id             = 10,
+       .dev = {
+               .platform_data  = &cmt10_platform_data,
+       },
+       .resource       = cmt10_resources,
+       .num_resources  = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
+       &scif0_device,
+       &scif1_device,
+       &scif2_device,
+       &scif3_device,
+       &scif4_device,
+       &scif5_device,
+       &scif6_device,
+       &scif7_device,
+       &scif8_device,
+       &cmt10_device,
+};
+
+void __init sh73a0_add_standard_devices(void)
+{
+       platform_add_devices(sh73a0_early_devices,
+                           ARRAY_SIZE(sh73a0_early_devices));
+}
+
+void __init sh73a0_add_early_devices(void)
+{
+       early_platform_add_devices(sh73a0_early_devices,
+                                  ARRAY_SIZE(sh73a0_early_devices));
+}
index 4414a01e1e8a392befa91d6da826f8ab1698223c..8206842ddd9e21d36677d3db39869570648151c4 100644 (file)
@@ -772,7 +772,7 @@ config CACHE_L2X0
        depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
                   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
                   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
-                  ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+                  ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
        default y
        select OUTER_CACHE
        select OUTER_CACHE_SYNC
index d2352ac437c58db944b0848d1fcc8dde10da0ce7..4bc614e4221cdc425ee1aeb91a3a241b9756340c 100644 (file)
@@ -31,6 +31,7 @@
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377) || \
       defined(CONFIG_ARCH_SH7372)
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
   }
 
 #if defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377)
 #define SCIF_FNS(name, scif_offset, scif_size) \
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377)
 
@@ -632,6 +638,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377) || \
       defined(CONFIG_ARCH_SH7372)