/* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */
struct class *ubi_class;
-/* Slab cache for lock-tree entries */
-struct kmem_cache *ubi_ltree_slab;
-
/* Slab cache for wear-leveling entries */
struct kmem_cache *ubi_wl_entry_slab;
int i, err;
dev_t dev;
- mutex_init(&ubi->volumes_mutex);
- spin_lock_init(&ubi->volumes_lock);
-
sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
/*
}
/* Similar for the data offset */
- ubi->leb_start = ubi->vid_hdr_offset + ubi->vid_hdr_alsize;
+ ubi->leb_start = ubi->vid_hdr_offset + UBI_EC_HDR_SIZE;
ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);
dbg_msg("vid_hdr_offset %d", ubi->vid_hdr_offset);
return 0;
}
+/**
+ * autoresize - re-size the volume which has the "auto-resize" flag set.
+ * @ubi: UBI device description object
+ * @vol_id: ID of the volume to re-size
+ *
+ * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * the volume table to the largest possible size. See comments in ubi-header.h
+ * for more description of the flag. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+static int autoresize(struct ubi_device *ubi, int vol_id)
+{
+ struct ubi_volume_desc desc;
+ struct ubi_volume *vol = ubi->volumes[vol_id];
+ int err, old_reserved_pebs = vol->reserved_pebs;
+
+ /*
+ * Clear the auto-resize flag in the volume in-memory copy of the
+ * volume table, and 'ubi_resize_volume()' will propogate this change
+ * to the flash.
+ */
+ ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
+
+ if (ubi->avail_pebs == 0) {
+ struct ubi_vtbl_record vtbl_rec;
+
+ /*
+ * No avalilable PEBs to re-size the volume, clear the flag on
+ * flash and exit.
+ */
+ memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
+ sizeof(struct ubi_vtbl_record));
+ err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+ if (err)
+ ubi_err("cannot clean auto-resize flag for volume %d",
+ vol_id);
+ } else {
+ desc.vol = vol;
+ err = ubi_resize_volume(&desc,
+ old_reserved_pebs + ubi->avail_pebs);
+ if (err)
+ ubi_err("cannot auto-resize volume %d", vol_id);
+ }
+
+ if (err)
+ return err;
+
+ ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id,
+ vol->name, old_reserved_pebs, vol->reserved_pebs);
+ return 0;
+}
+
/**
* ubi_attach_mtd_dev - attach an MTD device.
* @mtd_dev: MTD device description object
ubi->mtd = mtd;
ubi->ubi_num = ubi_num;
ubi->vid_hdr_offset = vid_hdr_offset;
+ ubi->autoresize_vol_id = -1;
+
+ mutex_init(&ubi->buf_mutex);
+ mutex_init(&ubi->ckvol_mutex);
+ mutex_init(&ubi->volumes_mutex);
+ spin_lock_init(&ubi->volumes_lock);
dbg_msg("attaching mtd%d to ubi%d: VID header offset %d",
mtd->index, ubi_num, vid_hdr_offset);
if (err)
goto out_free;
- mutex_init(&ubi->buf_mutex);
- mutex_init(&ubi->ckvol_mutex);
ubi->peb_buf1 = vmalloc(ubi->peb_size);
if (!ubi->peb_buf1)
goto out_free;
goto out_free;
}
+ if (ubi->autoresize_vol_id != -1) {
+ err = autoresize(ubi, ubi->autoresize_vol_id);
+ if (err)
+ goto out_detach;
+ }
+
err = uif_init(ubi);
if (err)
goto out_detach;
return 0;
}
-/**
- * ltree_entry_ctor - lock tree entries slab cache constructor.
- * @obj: the lock-tree entry to construct
- * @cache: the lock tree entry slab cache
- * @flags: constructor flags
- */
-static void ltree_entry_ctor(struct kmem_cache *cache, void *obj)
-{
- struct ubi_ltree_entry *le = obj;
-
- le->users = 0;
- init_rwsem(&le->mutex);
-}
-
/**
* find_mtd_device - open an MTD device by its name or number.
* @mtd_dev: name or number of the device
goto out_version;
}
- ubi_ltree_slab = kmem_cache_create("ubi_ltree_slab",
- sizeof(struct ubi_ltree_entry), 0,
- 0, <ree_entry_ctor);
- if (!ubi_ltree_slab)
- goto out_dev_unreg;
-
ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
sizeof(struct ubi_wl_entry),
0, 0, NULL);
if (!ubi_wl_entry_slab)
- goto out_ltree;
+ goto out_dev_unreg;
/* Attach MTD devices */
for (i = 0; i < mtd_devs; i++) {
mutex_unlock(&ubi_devices_mutex);
}
kmem_cache_destroy(ubi_wl_entry_slab);
-out_ltree:
- kmem_cache_destroy(ubi_ltree_slab);
out_dev_unreg:
misc_deregister(&ubi_ctrl_cdev);
out_version:
mutex_unlock(&ubi_devices_mutex);
}
kmem_cache_destroy(ubi_wl_entry_slab);
- kmem_cache_destroy(ubi_ltree_slab);
misc_deregister(&ubi_ctrl_cdev);
class_remove_file(ubi_class, &ubi_version);
class_destroy(ubi_class);
struct mtd_dev_param *p;
char buf[MTD_PARAM_LEN_MAX];
char *pbuf = &buf[0];
- char *tokens[3] = {NULL, NULL, NULL};
+ char *tokens[2] = {NULL, NULL};
if (!val)
return -EINVAL;
if (buf[len - 1] == '\n')
buf[len - 1] = '\0';
- for (i = 0; i < 3; i++)
+ for (i = 0; i < 2; i++)
tokens[i] = strsep(&pbuf, ",");
if (pbuf) {
if (vol->updating) {
ubi_warn("update of volume %d not finished, volume is damaged",
vol->vol_id);
+ ubi_assert(!vol->changing_leb);
vol->updating = 0;
vfree(vol->upd_buf);
+ } else if (vol->changing_leb) {
+ dbg_msg("only %lld of %lld bytes received for atomic LEB change"
+ " for volume %d:%d, cancel", vol->upd_received,
+ vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id);
+ vol->changing_leb = 0;
+ vfree(vol->upd_buf);
}
ubi_close_volume(desc);
struct ubi_volume_desc *desc = file->private_data;
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
- int err, lnum, off, len, vol_id = desc->vol->vol_id, tbuf_size;
+ int err, lnum, off, len, tbuf_size;
size_t count_save = count;
void *tbuf;
uint64_t tmp;
dbg_msg("read %zd bytes from offset %lld of volume %d",
- count, *offp, vol_id);
+ count, *offp, vol->vol_id);
if (vol->updating) {
dbg_err("updating");
return 0;
if (vol->corrupted)
- dbg_msg("read from corrupted volume %d", vol_id);
+ dbg_msg("read from corrupted volume %d", vol->vol_id);
if (*offp + count > vol->used_bytes)
count_save = count = vol->used_bytes - *offp;
uint64_t tmp;
dbg_msg("requested: write %zd bytes to offset %lld of volume %u",
- count, *offp, desc->vol->vol_id);
+ count, *offp, vol->vol_id);
if (vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
- if (!vol->updating)
+ if (!vol->updating && !vol->changing_leb)
return vol_cdev_direct_write(file, buf, count, offp);
- err = ubi_more_update_data(ubi, vol->vol_id, buf, count);
+ if (vol->updating)
+ err = ubi_more_update_data(ubi, vol, buf, count);
+ else
+ err = ubi_more_leb_change_data(ubi, vol, buf, count);
+
if (err < 0) {
- ubi_err("cannot write %zd bytes of update data, error %d",
+ ubi_err("cannot accept more %zd bytes of data, error %d",
count, err);
return err;
}
if (err) {
/*
- * Update is finished, @err contains number of actually written
- * bytes now.
+ * The operation is finished, @err contains number of actually
+ * written bytes.
*/
count = err;
+ if (vol->changing_leb) {
+ revoke_exclusive(desc, UBI_READWRITE);
+ return count;
+ }
+
err = ubi_check_volume(ubi, vol->vol_id);
if (err < 0)
return err;
revoke_exclusive(desc, UBI_READWRITE);
}
- *offp += count;
return count;
}
if (err < 0)
break;
- err = ubi_start_update(ubi, vol->vol_id, bytes);
+ err = ubi_start_update(ubi, vol, bytes);
if (bytes == 0)
revoke_exclusive(desc, UBI_READWRITE);
+ break;
+ }
+
+ /* Atomic logical eraseblock change command */
+ case UBI_IOCEBCH:
+ {
+ struct ubi_leb_change_req req;
+
+ err = copy_from_user(&req, argp,
+ sizeof(struct ubi_leb_change_req));
+ if (err) {
+ err = -EFAULT;
+ break;
+ }
+
+ if (desc->mode == UBI_READONLY ||
+ vol->vol_type == UBI_STATIC_VOLUME) {
+ err = -EROFS;
+ break;
+ }
+
+ /* Validate the request */
+ err = -EINVAL;
+ if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
+ req.bytes < 0 || req.lnum >= vol->usable_leb_size)
+ break;
+ if (req.dtype != UBI_LONGTERM && req.dtype != UBI_SHORTTERM &&
+ req.dtype != UBI_UNKNOWN)
+ break;
+
+ err = get_exclusive(desc);
+ if (err < 0)
+ break;
- file->f_pos = 0;
+ err = ubi_start_leb_change(ubi, vol, &req);
+ if (req.bytes == 0)
+ revoke_exclusive(desc, UBI_READWRITE);
break;
}
break;
}
- if (desc->mode == UBI_READONLY) {
+ if (desc->mode == UBI_READONLY ||
+ vol->vol_type == UBI_STATIC_VOLUME) {
err = -EROFS;
break;
}
break;
}
- if (vol->vol_type != UBI_DYNAMIC_VOLUME) {
- err = -EROFS;
- break;
- }
-
dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
err = ubi_eba_unmap_leb(ubi, vol, lnum);
if (err)
*/
static int ubi_get_compat(const struct ubi_device *ubi, int vol_id)
{
- if (vol_id == UBI_LAYOUT_VOL_ID)
+ if (vol_id == UBI_LAYOUT_VOLUME_ID)
return UBI_LAYOUT_VOLUME_COMPAT;
return 0;
}
{
struct ubi_ltree_entry *le, *le1, *le_free;
- le = kmem_cache_alloc(ubi_ltree_slab, GFP_NOFS);
+ le = kmalloc(sizeof(struct ubi_ltree_entry), GFP_NOFS);
if (!le)
return ERR_PTR(-ENOMEM);
+ le->users = 0;
+ init_rwsem(&le->mutex);
le->vol_id = vol_id;
le->lnum = lnum;
spin_unlock(&ubi->ltree_lock);
if (le_free)
- kmem_cache_free(ubi_ltree_slab, le_free);
+ kfree(le_free);
return le;
}
up_read(&le->mutex);
if (free)
- kmem_cache_free(ubi_ltree_slab, le);
+ kfree(le);
}
/**
free = 0;
spin_unlock(&ubi->ltree_lock);
if (free)
- kmem_cache_free(ubi_ltree_slab, le);
+ kfree(le);
return 1;
}
up_write(&le->mutex);
if (free)
- kmem_cache_free(ubi_ltree_slab, le);
+ kfree(le);
}
/**
{
int err, pnum, vol_id = vol->vol_id;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
struct ubi_vid_hdr *vid_hdr;
uint32_t uninitialized_var(crc);
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
err = leb_read_lock(ubi, vol_id, lnum);
if (err)
return err;
int err, pnum, tries = 0, vol_id = vol->vol_id;
struct ubi_vid_hdr *vid_hdr;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
struct ubi_vid_hdr *vid_hdr;
uint32_t crc;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
struct ubi_vid_hdr *vid_hdr;
uint32_t crc;
- ubi_assert(ubi->ref_count > 0);
- ubi_assert(vol->ref_count > 0);
-
if (ubi->ro_mode)
return -EROFS;
+ if (len == 0) {
+ /*
+ * Special case when data length is zero. In this case the LEB
+ * has to be unmapped and mapped somewhere else.
+ */
+ err = ubi_eba_unmap_leb(ubi, vol, lnum);
+ if (err)
+ return err;
+ return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+ }
+
vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
if (!vid_hdr)
return -ENOMEM;
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
- int err, vol_id = vol->vol_id;
+ int err;
- dbg_msg("erase LEB %d:%d", vol_id, lnum);
+ dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
- int vol_id = vol->vol_id;
- dbg_msg("unmap LEB %d:%d", vol_id, lnum);
+ dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
{
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
- int vol_id = vol->vol_id;
- dbg_msg("unmap LEB %d:%d", vol_id, lnum);
+ dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
return -EROFS;
* FIXME: but this is anyway obsolete and will be removed at
* some point.
*/
-
dbg_bld("using old crappy leb_ver stuff");
+ if (v1 == v2) {
+ ubi_err("PEB %d and PEB %d have the same version %lld",
+ seb->pnum, pnum, v1);
+ return -EINVAL;
+ }
+
abs = v1 - v2;
if (abs < 0)
abs = -abs;
vfree(buf);
out_free_vidh:
ubi_free_vid_hdr(ubi, vh);
- ubi_assert(err < 0);
return err;
}
}
vol_id = be32_to_cpu(vidh->vol_id);
- if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOL_ID) {
+ if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
int lnum = be32_to_cpu(vidh->lnum);
/* Unsupported internal volume */
* @readers: number of users holding this volume in read-only mode
* @writers: number of users holding this volume in read-write mode
* @exclusive: whether somebody holds this volume in exclusive mode
- * @checked: if this static volume was checked
*
* @reserved_pebs: how many physical eraseblocks are reserved for this volume
* @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
* @used_ebs: how many logical eraseblocks in this volume contain data
* @last_eb_bytes: how many bytes are stored in the last logical eraseblock
* @used_bytes: how many bytes of data this volume contains
- * @upd_marker: non-zero if the update marker is set for this volume
- * @corrupted: non-zero if the volume is corrupted (static volumes only)
* @alignment: volume alignment
* @data_pad: how many bytes are not used at the end of physical eraseblocks to
* satisfy the requested alignment
* @name_len: volume name length
* @name: volume name
*
- * @updating: whether the volume is being updated
* @upd_ebs: how many eraseblocks are expected to be updated
- * @upd_bytes: how many bytes are expected to be received
- * @upd_received: how many update bytes were already received
- * @upd_buf: update buffer which is used to collect update data
+ * @ch_lnum: LEB number which is being changing by the atomic LEB change
+ * operation
+ * @ch_dtype: data persistency type which is being changing by the atomic LEB
+ * change operation
+ * @upd_bytes: how many bytes are expected to be received for volume update or
+ * atomic LEB change
+ * @upd_received: how many bytes were already received for volume update or
+ * atomic LEB change
+ * @upd_buf: update buffer which is used to collect update data or data for
+ * atomic LEB change
*
* @eba_tbl: EBA table of this volume (LEB->PEB mapping)
+ * @checked: %1 if this static volume was checked
+ * @corrupted: %1 if the volume is corrupted (static volumes only)
+ * @upd_marker: %1 if the update marker is set for this volume
+ * @updating: %1 if the volume is being updated
+ * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
*
* @gluebi_desc: gluebi UBI volume descriptor
* @gluebi_refcount: reference count of the gluebi MTD device
int readers;
int writers;
int exclusive;
- int checked;
int reserved_pebs;
int vol_type;
int used_ebs;
int last_eb_bytes;
long long used_bytes;
- int upd_marker;
- int corrupted;
int alignment;
int data_pad;
int name_len;
char name[UBI_VOL_NAME_MAX+1];
- int updating;
int upd_ebs;
+ int ch_lnum;
+ int ch_dtype;
long long upd_bytes;
long long upd_received;
void *upd_buf;
int *eba_tbl;
+ int checked:1;
+ int corrupted:1;
+ int upd_marker:1;
+ int updating:1;
+ int changing_leb:1;
#ifdef CONFIG_MTD_UBI_GLUEBI
- /* Gluebi-related stuff may be compiled out */
+ /*
+ * Gluebi-related stuff may be compiled out.
+ * TODO: this should not be built into UBI but should be a separate
+ * ubimtd driver which works on top of UBI and emulates MTD devices.
+ */
struct ubi_volume_desc *gluebi_desc;
int gluebi_refcount;
struct mtd_info gluebi_mtd;
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
* @beb_rsvd_pebs: how many physical eraseblocks are reserved for bad PEB
- * handling
+ * handling
* @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling
*
+ * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end
+ * of UBI ititializetion
* @vtbl_slots: how many slots are available in the volume table
* @vtbl_size: size of the volume table in bytes
* @vtbl: in-RAM volume table copy
int beb_rsvd_pebs;
int beb_rsvd_level;
+ int autoresize_vol_id;
int vtbl_slots;
int vtbl_size;
struct ubi_vtbl_record *vtbl;
struct mutex volumes_mutex;
int max_ec;
+ /* TODO: mean_ec is not updated run-time, fix */
int mean_ec;
/* EBA unit's stuff */
#endif
};
-extern struct kmem_cache *ubi_ltree_slab;
extern struct kmem_cache *ubi_wl_entry_slab;
extern struct file_operations ubi_ctrl_cdev_operations;
extern struct file_operations ubi_cdev_operations;
void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol);
/* upd.c */
-int ubi_start_update(struct ubi_device *ubi, int vol_id, long long bytes);
-int ubi_more_update_data(struct ubi_device *ubi, int vol_id,
+int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
+ long long bytes);
+int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count);
+int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+ const struct ubi_leb_change_req *req);
+int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
+ const void __user *buf, int count);
/* misc.c */
int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);
*/
/*
- * This file contains implementation of the volume update functionality.
+ * This file contains implementation of the volume update and atomic LEB change
+ * functionality.
*
* The update operation is based on the per-volume update marker which is
* stored in the volume table. The update marker is set before the update
/**
* set_update_marker - set update marker.
* @ubi: UBI device description object
- * @vol_id: volume ID
+ * @vol: volume description object
*
- * This function sets the update marker flag for volume @vol_id. Returns zero
+ * This function sets the update marker flag for volume @vol. Returns zero
* in case of success and a negative error code in case of failure.
*/
-static int set_update_marker(struct ubi_device *ubi, int vol_id)
+static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
{
int err;
struct ubi_vtbl_record vtbl_rec;
- struct ubi_volume *vol = ubi->volumes[vol_id];
- dbg_msg("set update marker for volume %d", vol_id);
+ dbg_msg("set update marker for volume %d", vol->vol_id);
if (vol->upd_marker) {
- ubi_assert(ubi->vtbl[vol_id].upd_marker);
+ ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
dbg_msg("already set");
return 0;
}
- memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record));
+ memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
+ sizeof(struct ubi_vtbl_record));
vtbl_rec.upd_marker = 1;
mutex_lock(&ubi->volumes_mutex);
- err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+ err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
mutex_unlock(&ubi->volumes_mutex);
vol->upd_marker = 1;
return err;
/**
* clear_update_marker - clear update marker.
* @ubi: UBI device description object
- * @vol_id: volume ID
+ * @vol: volume description object
* @bytes: new data size in bytes
*
- * This function clears the update marker for volume @vol_id, sets new volume
+ * This function clears the update marker for volume @vol, sets new volume
* data size and clears the "corrupted" flag (static volumes only). Returns
* zero in case of success and a negative error code in case of failure.
*/
-static int clear_update_marker(struct ubi_device *ubi, int vol_id, long long bytes)
+static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
+ long long bytes)
{
int err;
uint64_t tmp;
struct ubi_vtbl_record vtbl_rec;
- struct ubi_volume *vol = ubi->volumes[vol_id];
- dbg_msg("clear update marker for volume %d", vol_id);
+ dbg_msg("clear update marker for volume %d", vol->vol_id);
- memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record));
+ memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
+ sizeof(struct ubi_vtbl_record));
ubi_assert(vol->upd_marker && vtbl_rec.upd_marker);
vtbl_rec.upd_marker = 0;
}
mutex_lock(&ubi->volumes_mutex);
- err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+ err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
mutex_unlock(&ubi->volumes_mutex);
vol->upd_marker = 0;
return err;
/**
* ubi_start_update - start volume update.
* @ubi: UBI device description object
- * @vol_id: volume ID
+ * @vol: volume description object
* @bytes: update bytes
*
* This function starts volume update operation. If @bytes is zero, the volume
* is just wiped out. Returns zero in case of success and a negative error code
* in case of failure.
*/
-int ubi_start_update(struct ubi_device *ubi, int vol_id, long long bytes)
+int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
+ long long bytes)
{
int i, err;
uint64_t tmp;
- struct ubi_volume *vol = ubi->volumes[vol_id];
- dbg_msg("start update of volume %d, %llu bytes", vol_id, bytes);
+ dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+ ubi_assert(!vol->updating && !vol->changing_leb);
vol->updating = 1;
- err = set_update_marker(ubi, vol_id);
+ err = set_update_marker(ubi, vol);
if (err)
return err;
}
if (bytes == 0) {
- err = clear_update_marker(ubi, vol_id, 0);
+ err = clear_update_marker(ubi, vol, 0);
if (err)
return err;
err = ubi_wl_flush(ubi);
return 0;
}
+/**
+ * ubi_start_leb_change - start atomic LEB change.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @req: operation request
+ *
+ * This function starts atomic LEB change operation. Returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+ const struct ubi_leb_change_req *req)
+{
+ ubi_assert(!vol->updating && !vol->changing_leb);
+
+ dbg_msg("start changing LEB %d:%d, %u bytes",
+ vol->vol_id, req->lnum, req->bytes);
+ if (req->bytes == 0)
+ return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
+ req->dtype);
+
+ vol->upd_bytes = req->bytes;
+ vol->upd_received = 0;
+ vol->changing_leb = 1;
+ vol->ch_lnum = req->lnum;
+ vol->ch_dtype = req->dtype;
+
+ vol->upd_buf = vmalloc(req->bytes);
+ if (!vol->upd_buf)
+ return -ENOMEM;
+
+ return 0;
+}
+
/**
* write_leb - write update data.
* @ubi: UBI device description object
- * @vol_id: volume ID
+ * @vol: volume description object
* @lnum: logical eraseblock number
* @buf: data to write
* @len: data size
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
-static int write_leb(struct ubi_device *ubi, int vol_id, int lnum, void *buf,
- int len, int used_ebs)
+static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+ void *buf, int len, int used_ebs)
{
- int err, l;
- struct ubi_volume *vol = ubi->volumes[vol_id];
+ int err;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
- l = ALIGN(len, ubi->min_io_size);
- memset(buf + len, 0xFF, l - len);
+ len = ALIGN(len, ubi->min_io_size);
+ memset(buf + len, 0xFF, len - len);
- l = ubi_calc_data_len(ubi, buf, l);
- if (l == 0) {
+ len = ubi_calc_data_len(ubi, buf, len);
+ if (len == 0) {
dbg_msg("all %d bytes contain 0xFF - skip", len);
return 0;
}
- if (len != l)
- dbg_msg("skip last %d bytes (0xFF)", len - l);
- err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, l, UBI_UNKNOWN);
+ err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
} else {
/*
* When writing static volume, and this is the last logical
* @count: how much bytes to write
*
* This function writes more data to the volume which is being updated. It may
- * be called arbitrary number of times until all of the update data arrive.
- * This function returns %0 in case of success, number of bytes written during
- * the last call if the whole volume update was successfully finished, and a
+ * be called arbitrary number of times until all the update data arriveis. This
+ * function returns %0 in case of success, number of bytes written during the
+ * last call if the whole volume update has been successfully finished, and a
* negative error code in case of failure.
*/
-int ubi_more_update_data(struct ubi_device *ubi, int vol_id,
+int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count)
{
uint64_t tmp;
- struct ubi_volume *vol = ubi->volumes[vol_id];
int lnum, offs, err = 0, len, to_write = count;
dbg_msg("write %d of %lld bytes, %lld already passed",
* is the last chunk, it's time to flush the buffer.
*/
ubi_assert(flush_len <= vol->usable_leb_size);
- err = write_leb(ubi, vol_id, lnum, vol->upd_buf,
- flush_len, vol->upd_ebs);
+ err = write_leb(ubi, vol, lnum, vol->upd_buf, flush_len,
+ vol->upd_ebs);
if (err)
return err;
}
if (len == vol->usable_leb_size ||
vol->upd_received + len == vol->upd_bytes) {
- err = write_leb(ubi, vol_id, lnum, vol->upd_buf, len,
- vol->upd_ebs);
+ err = write_leb(ubi, vol, lnum, vol->upd_buf,
+ len, vol->upd_ebs);
if (err)
break;
}
ubi_assert(vol->upd_received <= vol->upd_bytes);
if (vol->upd_received == vol->upd_bytes) {
/* The update is finished, clear the update marker */
- err = clear_update_marker(ubi, vol_id, vol->upd_bytes);
+ err = clear_update_marker(ubi, vol, vol->upd_bytes);
if (err)
return err;
err = ubi_wl_flush(ubi);
if (err == 0) {
+ vol->updating = 0;
err = to_write;
vfree(vol->upd_buf);
- vol->updating = 0;
}
}
return err;
}
+
+/**
+ * ubi_more_leb_change_data - accept more data for atomic LEB change.
+ * @vol: volume description object
+ * @buf: write data (user-space memory buffer)
+ * @count: how much bytes to write
+ *
+ * This function accepts more data to the volume which is being under the
+ * "atomic LEB change" operation. It may be called arbitrary number of times
+ * until all data arrives. This function returns %0 in case of success, number
+ * of bytes written during the last call if the whole "atomic LEB change"
+ * operation has been successfully finished, and a negative error code in case
+ * of failure.
+ */
+int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
+ const void __user *buf, int count)
+{
+ int err;
+
+ dbg_msg("write %d of %lld bytes, %lld already passed",
+ count, vol->upd_bytes, vol->upd_received);
+
+ if (ubi->ro_mode)
+ return -EROFS;
+
+ if (vol->upd_received + count > vol->upd_bytes)
+ count = vol->upd_bytes - vol->upd_received;
+
+ err = copy_from_user(vol->upd_buf + vol->upd_received, buf, count);
+ if (err)
+ return -EFAULT;
+
+ vol->upd_received += count;
+
+ if (vol->upd_received == vol->upd_bytes) {
+ int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
+
+ memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
+ len = ubi_calc_data_len(ubi, vol->upd_buf, len);
+ err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
+ vol->upd_buf, len, UBI_UNKNOWN);
+ if (err)
+ return err;
+ }
+
+ ubi_assert(vol->upd_received <= vol->upd_bytes);
+ if (vol->upd_received == vol->upd_bytes) {
+ vol->changing_leb = 0;
+ err = count;
+ vfree(vol->upd_buf);
+ }
+
+ return err;
+}
dbg_msg("re-size volume %d to from %d to %d PEBs",
vol_id, vol->reserved_pebs, reserved_pebs);
- ubi_assert(desc->mode == UBI_EXCLUSIVE);
- ubi_assert(vol == ubi->volumes[vol_id]);
if (vol->vol_type == UBI_STATIC_VOLUME &&
reserved_pebs < vol->used_ebs) {
}
spin_unlock(&ubi->volumes_lock);
-
/* Reserve physical eraseblocks */
pebs = reserved_pebs - vol->reserved_pebs;
if (pebs > 0) {
goto fail;
}
- if (vol->upd_marker != 0 && vol->upd_marker != 1) {
- ubi_err("bad upd_marker");
- goto fail;
- }
-
if (vol->upd_marker && vol->corrupted) {
dbg_err("update marker and corrupted simultaneously");
goto fail;
n = (long long)vol->used_ebs * vol->usable_leb_size;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
- if (vol->corrupted != 0) {
+ if (vol->corrupted) {
ubi_err("corrupted dynamic volume");
goto fail;
}
goto fail;
}
} else {
- if (vol->corrupted != 0 && vol->corrupted != 1) {
- ubi_err("bad corrupted");
- goto fail;
- }
if (vol->used_ebs < 0 || vol->used_ebs > vol->reserved_pebs) {
ubi_err("bad used_ebs");
goto fail;
struct ubi_volume *layout_vol;
ubi_assert(idx >= 0 && idx < ubi->vtbl_slots);
- layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOL_ID)];
+ layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
if (!vtbl_rec)
vtbl_rec = &empty_vtbl_record;
}
paranoid_vtbl_check(ubi);
- return ubi_wl_flush(ubi);
+ return 0;
}
/**
* this volume table copy was found during scanning. It has to be wiped
* out.
*/
- sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOL_ID);
+ sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
if (sv)
old_seb = ubi_scan_find_seb(sv, copy);
}
vid_hdr->vol_type = UBI_VID_DYNAMIC;
- vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOL_ID);
+ vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
vid_hdr->data_size = vid_hdr->used_ebs =
vid_hdr->data_pad = cpu_to_be32(0);
vol->name[vol->name_len] = '\0';
vol->vol_id = i;
+ if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
+ /* Auto re-size flag may be set only for one volume */
+ if (ubi->autoresize_vol_id != -1) {
+ ubi_err("more then one auto-resize volume (%d "
+ "and %d)", ubi->autoresize_vol_id, i);
+ return -EINVAL;
+ }
+
+ ubi->autoresize_vol_id = i;
+ }
+
ubi_assert(!ubi->volumes[i]);
ubi->volumes[i] = vol;
ubi->vol_count += 1;
vol->last_eb_bytes = vol->reserved_pebs;
vol->used_bytes =
(long long)vol->used_ebs * (ubi->leb_size - vol->data_pad);
- vol->vol_id = UBI_LAYOUT_VOL_ID;
+ vol->vol_id = UBI_LAYOUT_VOLUME_ID;
vol->ref_count = 1;
ubi_assert(!ubi->volumes[i]);
ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
- sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOL_ID);
+ sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
if (!sv) {
/*
* No logical eraseblocks belonging to the layout volume were
* Make sure all the works which have been done in parallel are
* finished.
*/
- ubi_assert(ubi->ref_count > 0);
down_write(&ubi->work_sem);
up_write(&ubi->work_sem);
#include <linux/types.h>
#include <mtd/ubi-user.h>
-/*
- * UBI data type hint constants.
- *
- * UBI_LONGTERM: long-term data
- * UBI_SHORTTERM: short-term data
- * UBI_UNKNOWN: data persistence is unknown
- *
- * These constants are used when data is written to UBI volumes in order to
- * help the UBI wear-leveling unit to find more appropriate physical
- * eraseblocks.
- */
-enum {
- UBI_LONGTERM = 1,
- UBI_SHORTTERM,
- UBI_UNKNOWN
-};
-
/*
* enum ubi_open_mode - UBI volume open mode constants.
*
UBI_VID_STATIC = 2
};
+/*
+ * Volume flags used in the volume table record.
+ *
+ * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
+ *
+ * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
+ * table. UBI automatically re-sizes the volume which has this flag and makes
+ * the volume to be of largest possible size. This means that if after the
+ * initialization UBI finds out that there are available physical eraseblocks
+ * present on the device, it automatically appends all of them to the volume
+ * (the physical eraseblocks reserved for bad eraseblocks handling and other
+ * reserved physical eraseblocks are not taken). So, if there is a volume with
+ * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
+ * eraseblocks will be zero after UBI is loaded, because all of them will be
+ * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
+ * after the volume had been initialized.
+ *
+ * The auto-resize feature is useful for device production purposes. For
+ * example, different NAND flash chips may have different amount of initial bad
+ * eraseblocks, depending of particular chip instance. Manufacturers of NAND
+ * chips usually guarantee that the amount of initial bad eraseblocks does not
+ * exceed certain percent, e.g. 2%. When one creates an UBI image which will be
+ * flashed to the end devices in production, he does not know the exact amount
+ * of good physical eraseblocks the NAND chip on the device will have, but this
+ * number is required to calculate the volume sized and put them to the volume
+ * table of the UBI image. In this case, one of the volumes (e.g., the one
+ * which will store the root file system) is marked as "auto-resizable", and
+ * UBI will adjust its size on the first boot if needed.
+ *
+ * Note, first UBI reserves some amount of physical eraseblocks for bad
+ * eraseblock handling, and then re-sizes the volume, not vice-versa. This
+ * means that the pool of reserved physical eraseblocks will always be present.
+ */
+enum {
+ UBI_VTBL_AUTORESIZE_FLG = 0x01,
+};
+
/*
* Compatibility constants used by internal volumes.
*
/* The layout volume contains the volume table */
-#define UBI_LAYOUT_VOL_ID UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC
+#define UBI_LAYOUT_VOLUME_ALIGN 1
#define UBI_LAYOUT_VOLUME_EBS 2
#define UBI_LAYOUT_VOLUME_NAME "layout volume"
#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
* @upd_marker: if volume update was started but not finished
* @name_len: volume name length
* @name: the volume name
- * @padding2: reserved, zeroes
+ * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
+ * @padding: reserved, zeroes
* @crc: a CRC32 checksum of the record
*
* The volume table records are stored in the volume table, which is stored in
__u8 upd_marker;
__be16 name_len;
__u8 name[UBI_VOL_NAME_MAX+1];
- __u8 padding2[24];
+ __u8 flags;
+ __u8 padding[23];
__be32 crc;
} __attribute__ ((packed));
*
* Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
* corresponding UBI volume character device. A pointer to a 64-bit update
- * size should be passed to the IOCTL. After then, UBI expects user to write
+ * size should be passed to the IOCTL. After this, UBI expects user to write
* this number of bytes to the volume character device. The update is finished
* when the claimed number of bytes is passed. So, the volume update sequence
* is something like:
* ioctl(fd, UBI_IOCVOLUP, &image_size);
* write(fd, buf, image_size);
* close(fd);
+ *
+ * Atomic eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL
+ * command of the corresponding UBI volume character device. A pointer to
+ * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is
+ * expected to write the requested amount of bytes. This is similar to the
+ * "volume update" IOCTL.
*/
/*
#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
/* An eraseblock erasure command, used for debugging, disabled by default */
#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
+/* An atomic eraseblock change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
/* Maximum MTD device name length supported by UBI */
#define MAX_UBI_MTD_NAME_LEN 127
+/*
+ * UBI data type hint constants.
+ *
+ * UBI_LONGTERM: long-term data
+ * UBI_SHORTTERM: short-term data
+ * UBI_UNKNOWN: data persistence is unknown
+ *
+ * These constants are used when data is written to UBI volumes in order to
+ * help the UBI wear-leveling unit to find more appropriate physical
+ * eraseblocks.
+ */
+enum {
+ UBI_LONGTERM = 1,
+ UBI_SHORTTERM = 2,
+ UBI_UNKNOWN = 3,
+};
+
/*
* UBI volume type constants.
*
*/
enum {
UBI_DYNAMIC_VOLUME = 3,
- UBI_STATIC_VOLUME = 4,
+ UBI_STATIC_VOLUME = 4,
};
/**
*
* This data structure is used to specify MTD device UBI has to attach and the
* parameters it has to use. The number which should be assigned to the new UBI
- * device is passed in @ubi_num. UBI may automatically assing the number if
+ * device is passed in @ubi_num. UBI may automatically assign the number if
* @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in
* @ubi_num.
*
* @padding2: reserved for future, not used, has to be zeroed
* @name: volume name
*
- * This structure is used by userspace programs when creating new volumes. The
+ * This structure is used by user-space programs when creating new volumes. The
* @used_bytes field is only necessary when creating static volumes.
*
* The @alignment field specifies the required alignment of the volume logical
int32_t vol_id;
} __attribute__ ((packed));
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic logical
+ * eraseblock change requests.
+ * @lnum: logical eraseblock number to change
+ * @bytes: how many bytes will be written to the logical eraseblock
+ * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_leb_change_req {
+ int32_t lnum;
+ int32_t bytes;
+ uint8_t dtype;
+ uint8_t padding[7];
+} __attribute__ ((packed));
+
#endif /* __UBI_USER_H__ */
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff