* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
Blackfin arch: Fix bogus str_ident check in gpio code
Blackfin arch: AD7879 Touchscreen driver
Blackfin arch: introducing bfin_addr_dcachable
Blackfin arch: fix a typo in comments
Blackfin arch: Remove useless head file
Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
Blackfin arch: update anomaly headers to match the latest sheet
Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
Blackfin arch: print out error/warning if you are running on the incorrect CPU type
Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
Blackfin arch: update board defconfigs
Blackfin arch: Add optional verbose debug
Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
Blackfin arch: ptrace - fix off-by-one check on end of memory regions
Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
Blackfin arch: flash memory map and dm9000 resources updating
Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
...
+++ /dev/null
- A Simple Guide to Configure KGDB
-
- Sonic Zhang <sonic.zhang@analog.com>
- Aug. 24th 2006
-
-
-This KGDB patch enables the kernel developer to do source level debugging on
-the kernel for the Blackfin architecture. The debugging works over either the
-ethernet interface or one of the uarts. Both software breakpoints and
-hardware breakpoints are supported in this version.
-http://docs.blackfin.uclinux.org/doku.php?id=kgdb
-
-
-2 known issues:
-1. This bug:
- http://blackfin.uclinux.org/tracker/index.php?func=detail&aid=544&group_id=18&atid=145
- The GDB client for Blackfin uClinux causes incorrect values of local
- variables to be displayed when the user breaks the running of kernel in GDB.
-2. Because of a hardware bug in Blackfin 533 v1.0.3:
- 05000067 - Watchpoints (Hardware Breakpoints) are not supported
- Hardware breakpoints cannot be set properly.
-
-
-Debug over Ethernet:
-
-1. Compile and install the cross platform version of gdb for blackfin, which
- can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
- "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
- With this selected, option "Full Symbolic/Source Debugging support" and
- "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over (Ethernet)". Add "kgdboe=@target-IP/,@host-IP/" to
- the option "Compiled-in Kernel Boot Parameter" under "Kernel hacking".
-
-4. Connect minicom to the serial port and boot the kernel image.
-
-5. Configure the IP "/> ifconfig eth0 target-IP"
-
-6. Start GDB client "bfin-elf-gdb vmlinux".
-
-7. Connect to the target "(gdb) target remote udp:target-IP:6443".
-
-8. Set software breakpoint "(gdb) break sys_open".
-
-9. Continue "(gdb) c".
-
-10. Run ls in the target console "/> ls".
-
-11. Breakpoint hits. "Breakpoint 1: sys_open(..."
-
-12. Display local variables and function paramters.
- (*) This operation gives wrong results, see known issue 1.
-
-13. Single stepping "(gdb) si".
-
-14. Remove breakpoint 1. "(gdb) del 1"
-
-15. Set hardware breakpoint "(gdb) hbreak sys_open".
-
-16. Continue "(gdb) c".
-
-17. Run ls in the target console "/> ls".
-
-18. Hardware breakpoint hits. "Breakpoint 1: sys_open(...".
- (*) This hardware breakpoint will not be hit, see known issue 2.
-
-19. Continue "(gdb) c".
-
-20. Interrupt the target in GDB "Ctrl+C".
-
-21. Detach from the target "(gdb) detach".
-
-22. Exit GDB "(gdb) quit".
-
-
-Debug over the UART:
-
-1. Compile and install the cross platform version of gdb for blackfin, which
- can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
- "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
- With this selected, option "Full Symbolic/Source Debugging support" and
- "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over (UART)". Set "KGDB: UART port number" to be
- a different one from the console. Don't forget to change the mode of
- blackfin serial driver to PIO. Otherwise kgdb works incorrectly on UART.
-
-4. If you want connect to kgdb when the kernel boots, enable
- "KGDB: Wait for gdb connection early"
-
-5. Compile kernel.
-
-6. Connect minicom to the serial port of the console and boot the kernel image.
-
-7. Start GDB client "bfin-elf-gdb vmlinux".
-
-8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
-
-9. Connect to the target on the second serial port "(gdb) target remote /dev/ttyS1".
-
-10. Set software breakpoint "(gdb) break sys_open".
-
-11. Continue "(gdb) c".
-
-12. Run ls in the target console "/> ls".
-
-13. A breakpoint is hit. "Breakpoint 1: sys_open(..."
-
-14. All other operations are the same as that in KGDB over Ethernet.
-
-
-Debug over the same UART as console:
-
-1. Compile and install the cross platform version of gdb for blackfin, which
- can be found at $(BINROOT)/bfin-elf-gdb.
-
-2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
- "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
- With this selected, option "Full Symbolic/Source Debugging support" and
- "Compile the kernel with frame pointers" are also selected.
-
-3. Select option "KGDB: connect over UART". Set "KGDB: UART port number" to console.
- Don't forget to change the mode of blackfin serial driver to PIO.
- Otherwise kgdb works incorrectly on UART.
-
-4. If you want connect to kgdb when the kernel boots, enable
- "KGDB: Wait for gdb connection early"
-
-5. Connect minicom to the serial port and boot the kernel image.
-
-6. (Optional) Ask target to wait for gdb connection by entering Ctrl+A. In minicom, you should enter Ctrl+A+A.
-
-7. Start GDB client "bfin-elf-gdb vmlinux".
-
-8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
-
-9. Connect to the target "(gdb) target remote /dev/ttyS0".
-
-10. Set software breakpoint "(gdb) break sys_open".
-
-11. Continue "(gdb) c". Then enter Ctrl+C twice to stop GDB connection.
-
-12. Run ls in the target console "/> ls". Dummy string can be seen on the console.
-
-13. Then connect the gdb to target again. "(gdb) target remote /dev/ttyS0".
- Now you will find a breakpoint is hit. "Breakpoint 1: sys_open(..."
-
-14. All other operations are the same as that in KGDB over Ethernet. The only
- difference is that after continue command in GDB, please stop GDB
- connection by 2 "Ctrl+C"s and connect again after breakpoints are hit or
- Ctrl+A is entered.
config BF561
bool "BF561"
help
- Not Supported Yet - Work in progress - BF561 Processor Support.
+ BF561 Processor Support.
endchoice
+config BF_REV_MIN
+ int
+ default 0 if (BF52x || BF54x)
+ default 2 if (BF537 || BF536 || BF534)
+ default 3 if (BF561 ||BF533 || BF532 || BF531)
+
+config BF_REV_MAX
+ int
+ default 2 if (BF52x || BF54x)
+ default 3 if (BF537 || BF536 || BF534)
+ default 5 if (BF561)
+ default 6 if (BF533 || BF532 || BF531)
+
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if BF527
- default BF_REV_0_2 if BF537
- default BF_REV_0_3 if BF533
- default BF_REV_0_0 if BF549
+ default BF_REV_0_1 if (BF52x || BF54x)
+ default BF_REV_0_2 if (BF534 || BF536 || BF537)
+ default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
config BF_REV_0_0
bool "0.0"
config BF_REV_0_2
bool "0.2"
- depends on (BF537 || BF536 || BF534)
+ depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
config BF_REV_0_3
bool "0.3"
bool "0.5"
depends on (BF561 || BF533 || BF532 || BF531)
+config BF_REV_0_6
+ bool "0.6"
+ depends on (BF533 || BF532 || BF531)
+
config BF_REV_ANY
bool "any"
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
default y
source "arch/blackfin/mach-bf527/Kconfig"
memory region is used to capture NULL pointer references as well
as some core kernel functions.
+config ROM_BASE
+ hex "Kernel ROM Base"
+ default "0x20040000"
+ range 0x20000000 0x20400000 if !(BF54x || BF561)
+ range 0x20000000 0x30000000 if (BF54x || BF561)
+ help
+
comment "Clock/PLL Setup"
config CLKIN_HZ
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
-config MAX_MEM_SIZE
- int "Max SDRAM Memory Size in MBytes"
- depends on !MPU
- default 512
- help
- This is the max memory size that the kernel will create CPLB
- tables for. Your system will not be able to handle any more.
-
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
bool "MT46V32M16_5B"
endchoice
+config MAX_MEM_SIZE
+ int "Max SDRAM Memory Size in MBytes"
+ depends on !MPU
+ default 512
+ help
+ This is the max memory size that the kernel will create CPLB
+ tables for. Your system will not be able to handle any more.
+
#
# Max & Min Speeds for various Chips
#
source kernel/time/Kconfig
-comment "Memory Setup"
-
comment "Misc"
choice
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
+config APP_STACK_L1
+ bool "Support locating application stack in L1 Scratch Memory"
+ default y
+ help
+ If enabled the application stack can be located in L1
+ scratch memory (less latency).
+
+ Currently only works with FLAT binaries.
+
comment "Speed Optimizations"
config BFIN_INS_LOWOVERHEAD
bool "ins[bwl] low overhead, higher interrupt latency"
endchoice
+config BFIN_L2_CACHEABLE
+ bool "Cache L2 SRAM"
+ depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
+ default n
+ help
+ Select to make L2 SRAM cacheable in L1 data and instruction cache.
+
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
source "lib/Kconfig.debug"
+config HAVE_ARCH_KGDB
+ def_bool y
+
+config DEBUG_VERBOSE
+ bool "Verbose fault messages"
+ default y
+ select PRINTK
+ help
+ When a program crashes due to an exception, or the kernel detects
+ an internal error, the kernel can print a not so brief message
+ explaining what the problem was. This debugging information is
+ useful to developers and kernel hackers when tracking down problems,
+ but mostly meaningless to other people. This is always helpful for
+ debugging but serves no purpose on a production system.
+ Most people should say N here.
+
config DEBUG_MMRS
bool "Generate Blackfin MMR tree"
select DEBUG_FS
hardware error interrupts and need to know where they are coming
from.
+config DEBUG_DOUBLEFAULT
+ bool "Debug Double Faults"
+ default n
+ help
+ If an exception is caused while executing code within the exception
+ handler, the NMI handler, the reset vector, or in emulator mode,
+ a double fault occurs. On the Blackfin, this is a unrecoverable
+ event. You have two options:
+ - RESET exactly when double fault occurs. The excepting
+ instruction address is stored in RETX, where the next kernel
+ boot will print it out.
+ - Print debug message. This is much more error prone, although
+ easier to handle. It is error prone since:
+ - The excepting instruction is not committed.
+ - All writebacks from the instruction are prevented.
+ - The generated exception is not taken.
+ - The EXCAUSE field is updated with an unrecoverable event
+ The only way to check this is to see if EXCAUSE contains the
+ unrecoverable event value at every exception return. By selecting
+ this option, you are skipping over the faulting instruction, and
+ hoping things stay together enough to print out a debug message.
+
+ This does add a little kernel code, but is the only method to debug
+ double faults - if unsure say "Y"
+
+choice
+ prompt "Double Fault Failure Method"
+ default DEBUG_DOUBLEFAULT_PRINT
+ depends on DEBUG_DOUBLEFAULT
+
+config DEBUG_DOUBLEFAULT_PRINT
+ bool "Print"
+
+config DEBUG_DOUBLEFAULT_RESET
+ bool "Reset"
+
+endchoice
+
config DEBUG_ICACHE_CHECK
bool "Check Instruction cache coherency"
depends on DEBUG_KERNEL
config EARLY_PRINTK
bool "Early printk"
default n
+ select SERIAL_CORE_CONSOLE
help
This option enables special console drivers which allow the kernel
to print messages very early in the bootup process.
rev-$(CONFIG_BF_REV_0_3) := 0.3
rev-$(CONFIG_BF_REV_0_4) := 0.4
rev-$(CONFIG_BF_REV_0_5) := 0.5
+rev-$(CONFIG_BF_REV_0_6) := 0.6
rev-$(CONFIG_BF_REV_NONE) := none
rev-$(CONFIG_BF_REV_ANY) := any
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.3
+# Thu Aug 28 16:49:53 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+CONFIG_BF526=y
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+# CONFIG_BFIN527_BLUETECHNIX_CM is not set
+CONFIG_BFIN526_EZBRD=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_BFIN=m
+CONFIG_BFIN_NAND_BASE=0x20212000
+CONFIG_BFIN_NAND_CLE=2
+CONFIG_BFIN_NAND_ALE=1
+CONFIG_BFIN_NAND_READY=3
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_TWI_KEYPAD is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_UART0 is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+# CONFIG_SND_BF5XX_AC97 is not set
+CONFIG_SND_BF5XX_SOC_SPORT=m
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+CONFIG_SND_SOC_SSM2602=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.14
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=400000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
#
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
extern void init_exception_vectors(void);
extern void program_IAR(void);
-extern void bfin_reset(void);
extern asmlinkage void lower_to_irq14(void);
extern asmlinkage void bfin_return_from_exception(void);
extern asmlinkage void evt14_softirq(void);
extern void *sram_alloc_with_lsl(size_t, unsigned long);
extern int sram_free_with_lsl(const void*);
+extern void *isram_memcpy(void *dest, const void *src, size_t n);
+
extern const char bfin_board_name[];
extern unsigned long bfin_sic_iwr[];
_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
_ebss_l2[], _l2_lma_start[];
-/* only used when CONFIG_MTD_UCLINUX */
+/* only used when MTD_UCLINUX */
extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
#ifdef CONFIG_BFIN_ICACHE_LOCK
--- /dev/null
+/* Blackfin on-chip ROM API
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFROM_H__
+#define __BFROM_H__
+
+#include <linux/types.h>
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ 0x00000000 /* read registers */
+#define SYSCTRL_WRITE 0x00000001 /* write registers */
+#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */
+#define SYSCTRL_CORERESET 0x00000004 /* perform core reset */
+#define SYSCTRL_SOFTRESET 0x00000006 /* perform core and system reset */
+#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */
+
+typedef struct ADI_SYSCTRL_VALUES {
+ uint16_t uwVrCtl;
+ uint16_t uwPllCtl;
+ uint16_t uwPllDiv;
+ uint16_t uwPllLockCnt;
+ uint16_t uwPllStat;
+} ADI_SYSCTRL_VALUES;
+
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)0xEF000038;
+
+/* We need a dedicated function since we need to screw with the stack pointer
+ * when resetting. The on-chip ROM will save/restore registers on the stack
+ * when doing a system reset, so the stack cannot be outside of the chip.
+ */
+__attribute__((__noreturn__))
+static inline void bfrom_SoftReset(void *new_stack)
+{
+ while (1)
+ __asm__ __volatile__(
+ "sp = %[stack];"
+ "jump (%[bfrom_syscontrol]);"
+ : : [bfrom_syscontrol] "p"(bfrom_SysControl),
+ "q0"(SYSCTRL_SOFTRESET),
+ "q1"(0),
+ "q2"(NULL),
+ [stack] "p"(new_stack)
+ );
+}
+
+/* OTP Functions */
+static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)0xEF000018;
+static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001A;
+static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)0xEF00001C;
+
+/* otp command: defines for "command" */
+#define OTP_INIT 0x00000001
+#define OTP_CLOSE 0x00000002
+
+/* otp read/write: defines for "flags" */
+#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF 0x00000001
+#define OTP_NO_ECC 0x00000010 /* do not use ECC */
+#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
+#define OTP_CHECK_FOR_PREV_WRITE 0x00000080
+
+/* Return values for all functions */
+#define OTP_SUCCESS 0x00000000
+#define OTP_MASTER_ERROR 0x001
+#define OTP_WRITE_ERROR 0x003
+#define OTP_READ_ERROR 0x005
+#define OTP_ACC_VIO_ERROR 0x009
+#define OTP_DATA_MULT_ERROR 0x011
+#define OTP_ECC_MULT_ERROR 0x021
+#define OTP_PREV_WR_ERROR 0x041
+#define OTP_DATA_SB_WARN 0x100
+#define OTP_ECC_SB_WARN 0x200
+
+#endif
#ifndef _BLACKFIN_CACHEFLUSH_H
#define _BLACKFIN_CACHEFLUSH_H
-#include <asm/cplb.h>
-
extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int);
extern void blackfin_icache_flush_range(unsigned int, unsigned int);
extern void blackfin_dcache_flush_range(unsigned int, unsigned int);
#endif
#define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON)
-#define L2_MEMORY (CPLB_COMMON)
+#ifdef CONFIG_BFIN_L2_CACHEABLE
+#define L2_IMEMORY (SDRAM_IGENERIC)
+#define L2_DMEMORY (SDRAM_DGENERIC)
+#else
+#define L2_IMEMORY (CPLB_COMMON)
+#define L2_DMEMORY (CPLB_COMMON)
+#endif
#define SDRAM_DNON_CHBL (CPLB_COMMON)
#define SDRAM_EBIU (CPLB_COMMON)
#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
extern unsigned long reserved_mem_dcache_on;
extern unsigned long reserved_mem_icache_on;
-extern void generate_cpl_tables(void);
+extern void generate_cplb_tables(void);
+
+static inline int bfin_addr_dcachable(unsigned long addr)
+{
+#ifdef CONFIG_BFIN_DCACHE
+ if (addr < (_ramend - DMA_UNCACHED_REGION))
+ return 1;
+#endif
+
+ if (reserved_mem_dcache_on &&
+ addr >= _ramend && addr < physical_mem_end)
+ return 1;
+
+ return 0;
+}
#endif
+++ /dev/null
-#ifndef _ASM_BLACKFIN_CPUMASK_H
-#define _ASM_BLACKFIN_CPUMASK_H
-
-#include <asm-generic/cpumask.h>
-
-#endif /* _ASM_BLACKFIN_CPUMASK_H */
extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction);
+static inline void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+}
#endif /* _BLACKFIN_DMA_MAPPING_H */
/* Number of bytes of registers. */
#define NUMREGBYTES BFIN_NUM_REGS*4
-#define BREAKPOINT() asm(" EXCPT 2;");
-#define BREAK_INSTR_SIZE 2
-#define HW_BREAKPOINT_NUM 6
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(" EXCPT 2;");
+}
+#define BREAK_INSTR_SIZE 2
+#define CACHE_FLUSH_IS_SAFE 1
+#define HW_INST_WATCHPOINT_NUM 6
+#define HW_WATCHPOINT_NUM 8
+#define TYPE_INST_WATCHPOINT 0
+#define TYPE_DATA_WATCHPOINT 1
/* Instruction watchpoint address control register bits mask */
#define WPPWR 0x1
#define WPDAEN1 0x8
#define WPDCNTEN0 0x10
#define WPDCNTEN1 0x20
+
#define WPDSRC0 0xc0
-#define WPDACC0 0x300
+#define WPDACC0_OFFSET 8
#define WPDSRC1 0xc00
-#define WPDACC1 0x3000
+#define WPDACC1_OFFSET 12
/* Watchpoint status register bits mask */
#define STATIA0 0x1
#define STATDA0 0x40
#define STATDA1 0x80
-extern void kgdb_print(const char *fmt, ...);
-extern void init_kgdb_uart(void);
-
#endif
extern int l1sram_free(const void*);
extern void *l1sram_alloc_max(void*);
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/* Called when creating a new context during fork() or execve(). */
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-#ifdef CONFIG_MPU
- unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
- mm->context.page_rwx_mask = (unsigned long *)p;
- memset(mm->context.page_rwx_mask, 0,
- page_mask_nelts * 3 * sizeof(long));
-#endif
- return 0;
-}
-
static inline void free_l1stack(void)
{
nr_l1stack_tasks--;
if (nr_l1stack_tasks == 0)
l1sram_free(l1_stack_base);
}
-static inline void destroy_context(struct mm_struct *mm)
-{
- struct sram_list_struct *tmp;
-
- if (current_l1_stack_save == mm->context.l1_stack_save)
- current_l1_stack_save = NULL;
- if (mm->context.l1_stack_save)
- free_l1stack();
-
- while ((tmp = mm->context.sram_list)) {
- mm->context.sram_list = tmp->next;
- sram_free(tmp->addr);
- kfree(tmp);
- }
-#ifdef CONFIG_MPU
- if (current_rwx_mask == mm->context.page_rwx_mask)
- current_rwx_mask = NULL;
- free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
-#endif
-}
static inline unsigned long
alloc_l1stack(unsigned long length, unsigned long *stack_base)
}
#endif
+#ifdef CONFIG_APP_STACK_L1
/* L1 stack switching. */
if (!next_mm->context.l1_stack_save)
return;
}
current_l1_stack_save = next_mm->context.l1_stack_save;
memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+#endif
}
#ifdef CONFIG_MPU
}
#endif
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve(). */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+ unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+ mm->context.page_rwx_mask = (unsigned long *)p;
+ memset(mm->context.page_rwx_mask, 0,
+ page_mask_nelts * 3 * sizeof(long));
+#endif
+ return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+ struct sram_list_struct *tmp;
+
+#ifdef CONFIG_APP_STACK_L1
+ if (current_l1_stack_save == mm->context.l1_stack_save)
+ current_l1_stack_save = 0;
+ if (mm->context.l1_stack_save)
+ free_l1stack();
+#endif
+
+ while ((tmp = mm->context.sram_list)) {
+ mm->context.sram_list = tmp->next;
+ sram_free(tmp->addr);
+ kfree(tmp);
+ }
+#ifdef CONFIG_MPU
+ if (current_rwx_mask == mm->context.page_rwx_mask)
+ current_rwx_mask = NULL;
+ free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
#endif
return revid;
}
+static inline uint16_t __pure bfin_cpuid(void)
+{
+ return (bfin_read_CHIPID() & CHIPID_FAMILY) >> 12;
+
+}
+
static inline uint32_t __pure bfin_compiled_revid(void)
{
#if defined(CONFIG_BF_REV_0_0)
#define PT_SEQSTAT 8
#define PT_IPEND 4
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
#define PT_SYSCFG 216
#define PT_TEXT_ADDR 220
#define PT_TEXT_END_ADDR 224
level " or a 16-bit register is accessed with a 32-bit instruction.\n"
#define HWC_x3(level) \
"External Memory Addressing Error\n"
+#define EXC_0x04(level) \
+ "Unimplmented exception occured\n" \
+ level " - Maybe you forgot to install a custom exception handler?\n"
#define HWC_x12(level) \
"Performance Monitor Overflow\n"
#define HWC_x18(level) \
level " a particular processor implementation.\n"
#define EXC_0x22(level) \
"Illegal instruction combination\n" \
- level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \
+ level " - See section for multi-issue rules in the Blackfin\n" \
level " Processor Instruction Set Reference.\n"
#define EXC_0x23(level) \
"Data access CPLB protection violation\n" \
DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
/* offsets into the pt_regs */
+ DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
DEFINE(PT_R0, offsetof(struct pt_regs, r0));
}
#endif
-void gpio_error(unsigned gpio)
+static void gpio_error(unsigned gpio)
{
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
}
static void set_label(unsigned short ident, const char *label)
{
- if (label && str_ident) {
+ if (label) {
strncpy(str_ident[ident].name, label,
RESOURCE_LABEL_SIZE);
str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
static char *get_label(unsigned short ident)
{
- if (!str_ident)
- return "UNKNOWN";
-
return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
}
printk(KERN_ERR "Please provide none-null label\n");
}
- if (label && str_ident)
+ if (label)
return strncmp(str_ident[ident].name,
label, strlen(label));
else
int first_switched_icplb, first_switched_dcplb;
int first_mask_dcplb;
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
{
int i_d, i_i;
unsigned long addr;
dcplb_tbl[i_d].addr = L1_DATA_A_START;
dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
#endif
+#if L1_CODE_LENGTH > 0
icplb_tbl[i_i].addr = L1_CODE_START;
icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+#endif
+
+ /* Cover L2 memory */
+#if L2_LENGTH > 0
+ dcplb_tbl[i_d].addr = L2_START;
+ dcplb_tbl[i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+ icplb_tbl[i_i].addr = L2_START;
+ icplb_tbl[i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+#endif
first_mask_dcplb = i_d;
first_switched_dcplb = i_d + (1 << page_mask_order);
void flush_switched_cplbs(void)
{
int i;
+ unsigned long flags;
nr_cplb_flush++;
+ local_irq_save(flags);
disable_icplb();
for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
icplb_tbl[i].data = 0;
bfin_write32(DCPLB_DATA0 + i * 4, 0);
}
enable_dcplb();
+ local_irq_restore(flags);
+
}
void set_mask_dcplbs(unsigned long *masks)
int i;
unsigned long addr = (unsigned long)masks;
unsigned long d_data;
- current_rwx_mask = masks;
+ unsigned long flags;
- if (!masks)
+ if (!masks) {
+ current_rwx_mask = masks;
return;
+ }
+
+ local_irq_save(flags);
+ current_rwx_mask = masks;
d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
#ifdef CONFIG_BFIN_DCACHE
addr += PAGE_SIZE;
}
enable_dcplb();
+ local_irq_restore(flags);
}
.end = L2_START + L2_LENGTH,
.psize = SIZE_1M,
.attr = SWITCH_T | I_CPLB | D_CPLB,
- .i_conf = L2_MEMORY,
- .d_conf = L2_MEMORY,
+ .i_conf = L2_IMEMORY,
+ .d_conf = L2_DMEMORY,
.valid = (L2_LENGTH > 0),
.name = "L2 Memory",
},
}
}
-void __init generate_cpl_tables(void)
+void __init generate_cplb_tables(void)
{
u16 i, j, process;
extern struct console *bfin_earlyserial_init(unsigned int port,
unsigned int cflag);
#endif
+#ifdef CONFIG_BFIN_JTAG_COMM
+extern struct console *bfin_jc_early_init(void);
+#endif
static struct console *early_console;
early_console = earlyserial_init(buf);
}
#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM
+ /* Check for Blackfin JTAG */
+ if (!strncmp(buf, "jtag", 4)) {
+ buf += 4;
+ early_console = bfin_jc_early_init();
+ }
+#endif
+
#ifdef CONFIG_FB
/* TODO: add framebuffer console support */
#endif
/*
- * File: arch/blackfin/kernel/kgdb.c
- * Based on:
- * Author: Sonic Zhang
+ * arch/blackfin/kernel/kgdb.c - Blackfin kgdb pieces
*
- * Created:
- * Description:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- * Copyright 2005-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/string.h>
#include <linux/kgdb.h>
#include <linux/console.h>
#include <linux/init.h>
-#include <linux/debugger.h>
#include <linux/errno.h>
#include <linux/irq.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/blackfin.h>
+#include <asm/dma.h>
/* Put the error code here just in case the user cares. */
-int gdb_bf533errcode;
+int gdb_bfin_errcode;
/* Likewise, the vector number here (since GDB only gets the signal
number through the usual means, and that's not very specific). */
-int gdb_bf533vector = -1;
+int gdb_bfin_vector = -1;
#if KGDB_MAX_NO_CPUS != 8
#error change the definition of slavecpulocks
#endif
-void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+#ifdef CONFIG_BFIN_WDT
+# error "Please unselect blackfin watchdog driver before build KGDB."
+#endif
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
gdb_regs[BFIN_R0] = regs->r0;
gdb_regs[BFIN_R1] = regs->r1;
gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
}
-void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
regs->r0 = gdb_regs[BFIN_R0];
regs->r1 = gdb_regs[BFIN_R1];
unsigned int dataacc:2;
unsigned short count;
unsigned int addr;
-} breakinfo[HW_BREAKPOINT_NUM];
+} breakinfo[HW_WATCHPOINT_NUM];
-int kgdb_arch_init(void)
-{
- debugger_step = 0;
-
- kgdb_remove_all_hw_break();
- return 0;
-}
-
-int kgdb_set_hw_break(unsigned long addr)
+int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
{
int breakno;
- for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
- if (!breakinfo[breakno].occupied) {
+ int bfin_type;
+ int dataacc = 0;
+
+ switch (type) {
+ case BP_HARDWARE_BREAKPOINT:
+ bfin_type = TYPE_INST_WATCHPOINT;
+ break;
+ case BP_WRITE_WATCHPOINT:
+ dataacc = 1;
+ bfin_type = TYPE_DATA_WATCHPOINT;
+ break;
+ case BP_READ_WATCHPOINT:
+ dataacc = 2;
+ bfin_type = TYPE_DATA_WATCHPOINT;
+ break;
+ case BP_ACCESS_WATCHPOINT:
+ dataacc = 3;
+ bfin_type = TYPE_DATA_WATCHPOINT;
+ break;
+ default:
+ return -ENOSPC;
+ }
+
+ /* Becasue hardware data watchpoint impelemented in current
+ * Blackfin can not trigger an exception event as the hardware
+ * instrction watchpoint does, we ignaore all data watch point here.
+ * They can be turned on easily after future blackfin design
+ * supports this feature.
+ */
+ for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+ if (bfin_type == breakinfo[breakno].type
+ && !breakinfo[breakno].occupied) {
breakinfo[breakno].occupied = 1;
breakinfo[breakno].enabled = 1;
- breakinfo[breakno].type = 1;
breakinfo[breakno].addr = addr;
+ breakinfo[breakno].dataacc = dataacc;
+ breakinfo[breakno].count = 0;
return 0;
}
return -ENOSPC;
}
-int kgdb_remove_hw_break(unsigned long addr)
+int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
{
int breakno;
- for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
- if (breakinfo[breakno].addr == addr)
- memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint));
+ int bfin_type;
+
+ switch (type) {
+ case BP_HARDWARE_BREAKPOINT:
+ bfin_type = TYPE_INST_WATCHPOINT;
+ break;
+ case BP_WRITE_WATCHPOINT:
+ case BP_READ_WATCHPOINT:
+ case BP_ACCESS_WATCHPOINT:
+ bfin_type = TYPE_DATA_WATCHPOINT;
+ break;
+ default:
+ return 0;
+ }
+ for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+ if (bfin_type == breakinfo[breakno].type
+ && breakinfo[breakno].occupied
+ && breakinfo[breakno].addr == addr) {
+ breakinfo[breakno].occupied = 0;
+ breakinfo[breakno].enabled = 0;
+ }
return 0;
}
-void kgdb_remove_all_hw_break(void)
+void bfin_remove_all_hw_break(void)
{
- memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8);
-}
+ int breakno;
-/*
-void kgdb_show_info(void)
-{
- printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n",
- bfin_read_WPIA0(), bfin_read_WPIACNT0(),
- bfin_read_WPIACTL(), bfin_read_WPSTAT());
+ memset(breakinfo, 0, sizeof(struct hw_breakpoint)*HW_WATCHPOINT_NUM);
+
+ for (breakno = 0; breakno < HW_INST_WATCHPOINT_NUM; breakno++)
+ breakinfo[breakno].type = TYPE_INST_WATCHPOINT;
+ for (; breakno < HW_WATCHPOINT_NUM; breakno++)
+ breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
}
-*/
-void kgdb_correct_hw_break(void)
+void bfin_correct_hw_break(void)
{
int breakno;
- int correctit;
- uint32_t wpdactl = bfin_read_WPDACTL();
+ unsigned int wpiactl = 0;
+ unsigned int wpdactl = 0;
+ int enable_wp = 0;
+
+ for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++)
+ if (breakinfo[breakno].enabled) {
+ enable_wp = 1;
- correctit = 0;
- for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) {
- if (breakinfo[breakno].type == 1) {
switch (breakno) {
case 0:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) {
- correctit = 1;
- wpdactl &= ~(WPIREN01|EMUSW0);
- wpdactl |= WPIAEN0|WPICNTEN0;
- bfin_write_WPIA0(breakinfo[breakno].addr);
- bfin_write_WPIACNT0(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) {
- correctit = 1;
- wpdactl &= ~WPIAEN0;
- }
+ wpiactl |= WPIAEN0|WPICNTEN0;
+ bfin_write_WPIA0(breakinfo[breakno].addr);
+ bfin_write_WPIACNT0(breakinfo[breakno].count
+ + breakinfo->skip);
break;
-
case 1:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) {
- correctit = 1;
- wpdactl &= ~(WPIREN01|EMUSW1);
- wpdactl |= WPIAEN1|WPICNTEN1;
- bfin_write_WPIA1(breakinfo[breakno].addr);
- bfin_write_WPIACNT1(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) {
- correctit = 1;
- wpdactl &= ~WPIAEN1;
- }
+ wpiactl |= WPIAEN1|WPICNTEN1;
+ bfin_write_WPIA1(breakinfo[breakno].addr);
+ bfin_write_WPIACNT1(breakinfo[breakno].count
+ + breakinfo->skip);
break;
-
case 2:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) {
- correctit = 1;
- wpdactl &= ~(WPIREN23|EMUSW2);
- wpdactl |= WPIAEN2|WPICNTEN2;
- bfin_write_WPIA2(breakinfo[breakno].addr);
- bfin_write_WPIACNT2(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) {
- correctit = 1;
- wpdactl &= ~WPIAEN2;
- }
+ wpiactl |= WPIAEN2|WPICNTEN2;
+ bfin_write_WPIA2(breakinfo[breakno].addr);
+ bfin_write_WPIACNT2(breakinfo[breakno].count
+ + breakinfo->skip);
break;
-
case 3:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) {
- correctit = 1;
- wpdactl &= ~(WPIREN23|EMUSW3);
- wpdactl |= WPIAEN3|WPICNTEN3;
- bfin_write_WPIA3(breakinfo[breakno].addr);
- bfin_write_WPIACNT3(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) {
- correctit = 1;
- wpdactl &= ~WPIAEN3;
- }
+ wpiactl |= WPIAEN3|WPICNTEN3;
+ bfin_write_WPIA3(breakinfo[breakno].addr);
+ bfin_write_WPIACNT3(breakinfo[breakno].count
+ + breakinfo->skip);
break;
case 4:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) {
- correctit = 1;
- wpdactl &= ~(WPIREN45|EMUSW4);
- wpdactl |= WPIAEN4|WPICNTEN4;
- bfin_write_WPIA4(breakinfo[breakno].addr);
- bfin_write_WPIACNT4(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) {
- correctit = 1;
- wpdactl &= ~WPIAEN4;
- }
+ wpiactl |= WPIAEN4|WPICNTEN4;
+ bfin_write_WPIA4(breakinfo[breakno].addr);
+ bfin_write_WPIACNT4(breakinfo[breakno].count
+ + breakinfo->skip);
break;
case 5:
- if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) {
- correctit = 1;
- wpdactl &= ~(WPIREN45|EMUSW5);
- wpdactl |= WPIAEN5|WPICNTEN5;
- bfin_write_WPIA5(breakinfo[breakno].addr);
- bfin_write_WPIACNT5(breakinfo[breakno].skip);
- } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) {
- correctit = 1;
- wpdactl &= ~WPIAEN5;
- }
+ wpiactl |= WPIAEN5|WPICNTEN5;
+ bfin_write_WPIA5(breakinfo[breakno].addr);
+ bfin_write_WPIACNT5(breakinfo[breakno].count
+ + breakinfo->skip);
+ break;
+ case 6:
+ wpdactl |= WPDAEN0|WPDCNTEN0|WPDSRC0;
+ wpdactl |= breakinfo[breakno].dataacc
+ << WPDACC0_OFFSET;
+ bfin_write_WPDA0(breakinfo[breakno].addr);
+ bfin_write_WPDACNT0(breakinfo[breakno].count
+ + breakinfo->skip);
+ break;
+ case 7:
+ wpdactl |= WPDAEN1|WPDCNTEN1|WPDSRC1;
+ wpdactl |= breakinfo[breakno].dataacc
+ << WPDACC1_OFFSET;
+ bfin_write_WPDA1(breakinfo[breakno].addr);
+ bfin_write_WPDACNT1(breakinfo[breakno].count
+ + breakinfo->skip);
break;
}
}
- }
- if (correctit) {
- wpdactl &= ~WPAND;
- wpdactl |= WPPWR;
- /*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/
+
+ /* Should enable WPPWR bit first before set any other
+ * WPIACTL and WPDACTL bits */
+ if (enable_wp) {
+ bfin_write_WPIACTL(WPPWR);
+ CSYNC();
+ bfin_write_WPIACTL(wpiactl|WPPWR);
bfin_write_WPDACTL(wpdactl);
CSYNC();
- /*kgdb_show_info();*/
}
}
void kgdb_disable_hw_debug(struct pt_regs *regs)
{
/* Disable hardware debugging while we are in kgdb */
- bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1);
+ bfin_write_WPIACTL(0);
+ bfin_write_WPDACTL(0);
CSYNC();
}
-void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
+#ifdef CONFIG_SMP
+void kgdb_passive_cpu_callback(void *info)
+{
+ kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ smp_call_function(kgdb_passive_cpu_callback, NULL, 0, 0);
+}
+
+void kgdb_roundup_cpu(int cpu, unsigned long flags)
+{
+ smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0, 0);
+}
+#endif
+
+void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code)
{
/* Master processor is completely in the debugger */
- gdb_bf533vector = eVector;
- gdb_bf533errcode = err_code;
+ gdb_bfin_vector = eVector;
+ gdb_bfin_errcode = err_code;
}
-int kgdb_arch_handle_exception(int exceptionVector, int signo,
+int kgdb_arch_handle_exception(int vector, int signo,
int err_code, char *remcom_in_buffer,
char *remcom_out_buffer,
- struct pt_regs *linux_regs)
+ struct pt_regs *regs)
{
long addr;
long breakno;
/* try to read optional parameter, pc unchanged if no parm */
ptr = &remcom_in_buffer[1];
if (kgdb_hex2long(&ptr, &addr)) {
- linux_regs->retx = addr;
+ regs->retx = addr;
}
- newPC = linux_regs->retx;
+ newPC = regs->retx;
/* clear the trace bit */
- linux_regs->syscfg &= 0xfffffffe;
+ regs->syscfg &= 0xfffffffe;
/* set the trace bit if we're stepping */
if (remcom_in_buffer[0] == 's') {
- linux_regs->syscfg |= 0x1;
- debugger_step = linux_regs->ipend;
- debugger_step >>= 6;
- for (i = 10; i > 0; i--, debugger_step >>= 1)
- if (debugger_step & 1)
+ regs->syscfg |= 0x1;
+ kgdb_single_step = regs->ipend;
+ kgdb_single_step >>= 6;
+ for (i = 10; i > 0; i--, kgdb_single_step >>= 1)
+ if (kgdb_single_step & 1)
break;
/* i indicate event priority of current stopped instruction
* user space instruction is 0, IVG15 is 1, IVTMR is 10.
- * debugger_step > 0 means in single step mode
+ * kgdb_single_step > 0 means in single step mode
*/
- debugger_step = i + 1;
- } else {
- debugger_step = 0;
+ kgdb_single_step = i + 1;
}
- wp_status = bfin_read_WPSTAT();
- CSYNC();
-
- if (exceptionVector == VEC_WATCH) {
- for (breakno = 0; breakno < 6; ++breakno) {
+ if (vector == VEC_WATCH) {
+ wp_status = bfin_read_WPSTAT();
+ for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) {
if (wp_status & (1 << breakno)) {
breakinfo->skip = 1;
break;
}
}
+ bfin_write_WPSTAT(0);
}
- kgdb_correct_hw_break();
- bfin_write_WPSTAT(0);
+ bfin_correct_hw_break();
return 0;
} /* switch */
struct kgdb_arch arch_kgdb_ops = {
.gdb_bpt_instr = {0xa1},
+#ifdef CONFIG_SMP
+ .flags = KGDB_HW_BREAKPOINT|KGDB_THR_PROC_SWAP,
+#else
.flags = KGDB_HW_BREAKPOINT,
+#endif
+ .set_hw_breakpoint = bfin_set_hw_break,
+ .remove_hw_breakpoint = bfin_remove_hw_break,
+ .remove_all_hw_break = bfin_remove_all_hw_break,
+ .correct_hw_break = bfin_correct_hw_break,
};
+
+static int hex(char ch)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ return ch - 'a' + 10;
+ if ((ch >= '0') && (ch <= '9'))
+ return ch - '0';
+ if ((ch >= 'A') && (ch <= 'F'))
+ return ch - 'A' + 10;
+ return -1;
+}
+
+static int validate_memory_access_address(unsigned long addr, int size)
+{
+ int cpu = raw_smp_processor_id();
+
+ if (size < 0)
+ return EFAULT;
+ if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
+ return 0;
+ if (addr >= SYSMMR_BASE)
+ return 0;
+ if (addr >= ASYNC_BANK0_BASE
+ && addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
+ return 0;
+ if (cpu == 0) {
+ if (addr >= L1_SCRATCH_START
+ && (addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH))
+ return 0;
+#if L1_CODE_LENGTH != 0
+ if (addr >= L1_CODE_START
+ && (addr + size <= L1_CODE_START + L1_CODE_LENGTH))
+ return 0;
+#endif
+#if L1_DATA_A_LENGTH != 0
+ if (addr >= L1_DATA_A_START
+ && (addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH))
+ return 0;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ if (addr >= L1_DATA_B_START
+ && (addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH))
+ return 0;
+#endif
+#ifdef CONFIG_SMP
+ } else if (cpu == 1) {
+ if (addr >= COREB_L1_SCRATCH_START
+ && (addr + size <= COREB_L1_SCRATCH_START
+ + L1_SCRATCH_LENGTH))
+ return 0;
+# if L1_CODE_LENGTH != 0
+ if (addr >= COREB_L1_CODE_START
+ && (addr + size <= COREB_L1_CODE_START + L1_CODE_LENGTH))
+ return 0;
+# endif
+# if L1_DATA_A_LENGTH != 0
+ if (addr >= COREB_L1_DATA_A_START
+ && (addr + size <= COREB_L1_DATA_A_START + L1_DATA_A_LENGTH))
+ return 0;
+# endif
+# if L1_DATA_B_LENGTH != 0
+ if (addr >= COREB_L1_DATA_B_START
+ && (addr + size <= COREB_L1_DATA_B_START + L1_DATA_B_LENGTH))
+ return 0;
+# endif
+#endif
+ }
+
+#if L2_LENGTH != 0
+ if (addr >= L2_START
+ && addr + size <= L2_START + L2_LENGTH)
+ return 0;
+#endif
+
+ return EFAULT;
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null). May return an error.
+ */
+int kgdb_mem2hex(char *mem, char *buf, int count)
+{
+ char *tmp;
+ int err = 0;
+ unsigned char *pch;
+ unsigned short mmr16;
+ unsigned long mmr32;
+ int cpu = raw_smp_processor_id();
+
+ if (validate_memory_access_address((unsigned long)mem, count))
+ return EFAULT;
+
+ /*
+ * We use the upper half of buf as an intermediate buffer for the
+ * raw memory copy. Hex conversion will work against this one.
+ */
+ tmp = buf + count;
+
+ if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+ switch (count) {
+ case 2:
+ if ((unsigned int)mem % 2 == 0) {
+ mmr16 = *(unsigned short *)mem;
+ pch = (unsigned char *)&mmr16;
+ *tmp++ = *pch++;
+ *tmp++ = *pch++;
+ tmp -= 2;
+ } else
+ err = EFAULT;
+ break;
+ case 4:
+ if ((unsigned int)mem % 4 == 0) {
+ mmr32 = *(unsigned long *)mem;
+ pch = (unsigned char *)&mmr32;
+ *tmp++ = *pch++;
+ *tmp++ = *pch++;
+ *tmp++ = *pch++;
+ *tmp++ = *pch++;
+ tmp -= 4;
+ } else
+ err = EFAULT;
+ break;
+ default:
+ err = EFAULT;
+ }
+ } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+ (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+ || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+ (unsigned int)(mem + count) <=
+ COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+ ) {
+ /* access L1 instruction SRAM*/
+ if (dma_memcpy(tmp, mem, count) == NULL)
+ err = EFAULT;
+ } else
+ err = probe_kernel_read(tmp, mem, count);
+
+ if (!err) {
+ while (count > 0) {
+ buf = pack_hex_byte(buf, *tmp);
+ tmp++;
+ count--;
+ }
+
+ *buf = 0;
+ }
+
+ return err;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem. Fix $, #, and
+ * 0x7d escaped with 0x7d. Return a pointer to the character after
+ * the last byte written.
+ */
+int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+ char *tmp_old;
+ char *tmp_new;
+ unsigned short *mmr16;
+ unsigned long *mmr32;
+ int err = 0;
+ int size = 0;
+ int cpu = raw_smp_processor_id();
+
+ tmp_old = tmp_new = buf;
+
+ while (count-- > 0) {
+ if (*tmp_old == 0x7d)
+ *tmp_new = *(++tmp_old) ^ 0x20;
+ else
+ *tmp_new = *tmp_old;
+ tmp_new++;
+ tmp_old++;
+ size++;
+ }
+
+ if (validate_memory_access_address((unsigned long)mem, size))
+ return EFAULT;
+
+ if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+ switch (size) {
+ case 2:
+ if ((unsigned int)mem % 2 == 0) {
+ mmr16 = (unsigned short *)buf;
+ *(unsigned short *)mem = *mmr16;
+ } else
+ return EFAULT;
+ break;
+ case 4:
+ if ((unsigned int)mem % 4 == 0) {
+ mmr32 = (unsigned long *)buf;
+ *(unsigned long *)mem = *mmr32;
+ } else
+ return EFAULT;
+ break;
+ default:
+ return EFAULT;
+ }
+ } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+ (unsigned int)(mem + count) < L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+ || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+ (unsigned int)(mem + count) <=
+ COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+ ) {
+ /* access L1 instruction SRAM */
+ if (dma_memcpy(mem, buf, size) == NULL)
+ err = EFAULT;
+ } else
+ err = probe_kernel_write(mem, buf, size);
+
+ return err;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in mem.
+ * Return a pointer to the character AFTER the last byte written.
+ * May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+ char *tmp_raw;
+ char *tmp_hex;
+ unsigned short *mmr16;
+ unsigned long *mmr32;
+ int cpu = raw_smp_processor_id();
+
+ if (validate_memory_access_address((unsigned long)mem, count))
+ return EFAULT;
+
+ /*
+ * We use the upper half of buf as an intermediate buffer for the
+ * raw memory that is converted from hex.
+ */
+ tmp_raw = buf + count * 2;
+
+ tmp_hex = tmp_raw - 1;
+ while (tmp_hex >= buf) {
+ tmp_raw--;
+ *tmp_raw = hex(*tmp_hex--);
+ *tmp_raw |= hex(*tmp_hex--) << 4;
+ }
+
+ if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
+ switch (count) {
+ case 2:
+ if ((unsigned int)mem % 2 == 0) {
+ mmr16 = (unsigned short *)tmp_raw;
+ *(unsigned short *)mem = *mmr16;
+ } else
+ return EFAULT;
+ break;
+ case 4:
+ if ((unsigned int)mem % 4 == 0) {
+ mmr32 = (unsigned long *)tmp_raw;
+ *(unsigned long *)mem = *mmr32;
+ } else
+ return EFAULT;
+ break;
+ default:
+ return EFAULT;
+ }
+ } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START &&
+ (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH
+#ifdef CONFIG_SMP
+ || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START &&
+ (unsigned int)(mem + count) <=
+ COREB_L1_CODE_START + L1_CODE_LENGTH
+#endif
+ ) {
+ /* access L1 instruction SRAM */
+ if (dma_memcpy(mem, tmp_raw, count) == NULL)
+ return EFAULT;
+ } else
+ return probe_kernel_write(mem, tmp_raw, count);
+ return 0;
+}
+
+int kgdb_validate_break_address(unsigned long addr)
+{
+ int cpu = raw_smp_processor_id();
+
+ if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end)
+ return 0;
+ if (addr >= ASYNC_BANK0_BASE
+ && addr + BREAK_INSTR_SIZE <= ASYNC_BANK3_BASE + ASYNC_BANK3_BASE)
+ return 0;
+#if L1_CODE_LENGTH != 0
+ if (cpu == 0 && addr >= L1_CODE_START
+ && addr + BREAK_INSTR_SIZE <= L1_CODE_START + L1_CODE_LENGTH)
+ return 0;
+# ifdef CONFIG_SMP
+ else if (cpu == 1 && addr >= COREB_L1_CODE_START
+ && addr + BREAK_INSTR_SIZE <= COREB_L1_CODE_START + L1_CODE_LENGTH)
+ return 0;
+# endif
+#endif
+#if L2_LENGTH != 0
+ if (addr >= L2_START
+ && addr + BREAK_INSTR_SIZE <= L2_START + L2_LENGTH)
+ return 0;
+#endif
+
+ return EFAULT;
+}
+
+int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
+{
+ int err;
+ int cpu = raw_smp_processor_id();
+
+ if ((cpu == 0 && (unsigned int)addr >= L1_CODE_START
+ && (unsigned int)(addr + BREAK_INSTR_SIZE)
+ < L1_CODE_START + L1_CODE_LENGTH)
+#ifdef CONFIG_SMP
+ || (cpu == 1 && (unsigned int)addr >= COREB_L1_CODE_START
+ && (unsigned int)(addr + BREAK_INSTR_SIZE)
+ < COREB_L1_CODE_START + L1_CODE_LENGTH)
+#endif
+ ) {
+ /* access L1 instruction SRAM */
+ if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
+ == NULL)
+ return -EFAULT;
+
+ if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
+ BREAK_INSTR_SIZE) == NULL)
+ return -EFAULT;
+
+ return 0;
+ } else {
+ err = probe_kernel_read(saved_instr, (char *)addr,
+ BREAK_INSTR_SIZE);
+ if (err)
+ return err;
+
+ return probe_kernel_write((char *)addr,
+ arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
+ }
+}
+
+int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
+{
+ if ((unsigned int)addr >= L1_CODE_START &&
+ (unsigned int)(addr + BREAK_INSTR_SIZE) <
+ L1_CODE_START + L1_CODE_LENGTH) {
+ /* access L1 instruction SRAM */
+ if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
+ return -EFAULT;
+
+ return 0;
+ } else
+ return probe_kernel_write((char *)addr,
+ (char *)bundle, BREAK_INSTR_SIZE);
+}
+
+int kgdb_arch_init(void)
+{
+ kgdb_single_step = 0;
+
+ bfin_remove_all_hw_break();
+ return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+}
#include <asm/dma.h>
#include <asm/fixed_code.h>
-#define MAX_SHARED_LIBS 3
#define TEXT_OFFSET 0
/*
* does not yet catch signals sent when the child dies.
struct vm_list_struct *vml;
struct sram_list_struct *sraml;
+ /* overflow */
+ if (start + len < start)
+ return -EIO;
+
for (vml = child->mm->context.vmlist; vml; vml = vml->next)
- if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end)
+ if (start >= vml->vma->vm_start && start + len < vml->vma->vm_end)
return 0;
for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
if (start >= (unsigned long)sraml->addr
- && start + len <= (unsigned long)sraml->addr + sraml->length)
+ && start + len < (unsigned long)sraml->addr + sraml->length)
return 0;
- if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END)
+ if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
return 0;
return -EIO;
}
+void ptrace_enable(struct task_struct *child)
+{
+ unsigned long tmp;
+ tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+}
+
/*
* Called by kernel/ptrace.c when detaching..
*
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
- int add = 0;
unsigned long __user *datap = (unsigned long __user *)data;
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKDATA:
pr_debug("ptrace: PEEKDATA\n");
- add = MAX_SHARED_LIBS * 4; /* space between text and data */
/* fall through */
case PTRACE_PEEKTEXT: /* read word at location addr. */
{
int copied;
ret = -EIO;
- pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add,
- sizeof(data));
- if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0)
+ pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %ld\n", addr, sizeof(data));
+ if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
break;
pr_debug("ptrace: user address is valid\n");
-#if L1_CODE_LENGTH != 0
- if (addr + add >= L1_CODE_START
- && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
- safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
+ if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+ && addr + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
- } else
-#endif
-#if L1_DATA_A_LENGTH != 0
- if (addr + add >= L1_DATA_A_START
- && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
- memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+ } else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+ && addr + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+ memcpy(&tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
- } else
-#endif
-#if L1_DATA_B_LENGTH != 0
- if (addr + add >= L1_DATA_B_START
- && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
- memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+ } else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+ && addr + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+ memcpy(&tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
- } else
-#endif
- if (addr + add >= FIXED_CODE_START
- && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
- memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+
+ } else if (addr >= FIXED_CODE_START
+ && addr + sizeof(tmp) <= FIXED_CODE_END) {
+ memcpy(&tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
+
} else
- copied = access_process_vm(child, addr + add, &tmp,
+ copied = access_process_vm(child, addr, &tmp,
sizeof(tmp), 0);
+
pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
if (copied != sizeof(tmp))
break;
/* when I and D space are separate, this will have to be fixed. */
case PTRACE_POKEDATA:
- printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+ pr_debug("ptrace: PTRACE_PEEKDATA\n");
/* fall through */
case PTRACE_POKETEXT: /* write the word at location addr. */
{
int copied;
ret = -EIO;
- pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n",
- addr, add, sizeof(data), data);
- if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0)
+ pr_debug("ptrace: POKETEXT at addr 0x%08lx + %ld bytes %lx\n",
+ addr, sizeof(data), data);
+ if (is_user_addr_valid(child, addr, sizeof(data)) < 0)
break;
pr_debug("ptrace: user address is valid\n");
-#if L1_CODE_LENGTH != 0
- if (addr + add >= L1_CODE_START
- && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
- safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
+ if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START
+ && addr + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy ((void *)(addr), &data, sizeof(data));
copied = sizeof(data);
- } else
-#endif
-#if L1_DATA_A_LENGTH != 0
- if (addr + add >= L1_DATA_A_START
- && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
- memcpy((void *)(addr + add), &data, sizeof(data));
+
+ } else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
+ && addr + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+ memcpy((void *)(addr), &data, sizeof(data));
copied = sizeof(data);
- } else
-#endif
-#if L1_DATA_B_LENGTH != 0
- if (addr + add >= L1_DATA_B_START
- && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
- memcpy((void *)(addr + add), &data, sizeof(data));
+
+ } else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
+ && addr + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+ memcpy((void *)(addr), &data, sizeof(data));
copied = sizeof(data);
- } else
-#endif
- if (addr + add >= FIXED_CODE_START
- && addr + add + sizeof(data) <= FIXED_CODE_END) {
- memcpy((void *)(addr + add), &data, sizeof(data));
+
+ } else if (addr >= FIXED_CODE_START
+ && addr + sizeof(data) <= FIXED_CODE_END) {
+ memcpy((void *)(addr), &data, sizeof(data));
copied = sizeof(data);
+
} else
- copied = access_process_vm(child, addr + add, &data,
+ copied = access_process_vm(child, addr, &data,
sizeof(data), 1);
+
pr_debug("ptrace: copied size %d\n", copied);
if (copied != sizeof(data))
break;
break;
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
- case PTRACE_CONT:
- { /* restart after signal. */
- long tmp;
+ case PTRACE_CONT: /* restart after signal. */
+ pr_debug("ptrace: syscall/cont\n");
- pr_debug("ptrace_cont\n");
-
- ret = -EIO;
- if (!valid_signal(data))
- break;
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
- child->exit_code = data;
- /* make sure the single step bit is not set. */
- tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
- put_reg(child, PT_SYSCFG, tmp);
- pr_debug("before wake_up_process\n");
- wake_up_process(child);
- ret = 0;
+ ret = -EIO;
+ if (!valid_signal(data))
break;
- }
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ ptrace_disable(child);
+ pr_debug("ptrace: before wake_up_process\n");
+ wake_up_process(child);
+ ret = 0;
+ break;
/*
* make the child exit. Best I can do is send it a sigkill.
* exit.
*/
case PTRACE_KILL:
- {
- long tmp;
- ret = 0;
- if (child->exit_state == EXIT_ZOMBIE) /* already dead */
- break;
- child->exit_code = SIGKILL;
- /* make sure the single step bit is not set. */
- tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
- put_reg(child, PT_SYSCFG, tmp);
- wake_up_process(child);
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
break;
- }
-
- case PTRACE_SINGLESTEP:
- { /* set the trap flag. */
- long tmp;
-
- pr_debug("single step\n");
- ret = -EIO;
- if (!valid_signal(data))
- break;
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
- tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
- put_reg(child, PT_SYSCFG, tmp);
+ child->exit_code = SIGKILL;
+ ptrace_disable(child);
+ wake_up_process(child);
+ break;
- child->exit_code = data;
- /* give it a chance to run. */
- wake_up_process(child);
- ret = 0;
+ case PTRACE_SINGLESTEP: /* set the trap flag. */
+ pr_debug("ptrace: single step\n");
+ ret = -EIO;
+ if (!valid_signal(data))
break;
- }
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ ptrace_enable(child);
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+ break;
case PTRACE_GETREGS:
- {
-
- /* Get all gp regs from the child. */
- ret = ptrace_getregs(child, datap);
- break;
- }
+ /* Get all gp regs from the child. */
+ ret = ptrace_getregs(child, datap);
+ break;
case PTRACE_SETREGS:
- {
- printk(KERN_NOTICE
- "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
- /* Set all gp regs in the child. */
- ret = 0;
- break;
- }
+ printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
+ /* Set all gp regs in the child. */
+ ret = 0;
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
asmlinkage void syscall_trace(void)
{
-
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return;
#include <asm/bfin-global.h>
#include <asm/reboot.h>
#include <asm/system.h>
+#include <asm/bfrom.h>
/* A system soft reset makes external memory unusable so force
* this function into L1. We use the compiler ssync here rather
* the core reset.
*/
__attribute__((l1_text))
-void bfin_reset(void)
+static void bfin_reset(void)
{
/* Wait for completion of "system" events such as cache line
* line fills so that we avoid infinite stalls later on as
bfin_write_SWRST(0x7);
/* Due to the way reset is handled in the hardware, we need
- * to delay for 7 SCLKS. The only reliable way to do this is
- * to calculate the CCLK/SCLK ratio and multiply 7. For now,
+ * to delay for 10 SCLKS. The only reliable way to do this is
+ * to calculate the CCLK/SCLK ratio and multiply 10. For now,
* we'll assume worse case which is a 1:15 ratio.
*/
asm(
"LSETUP (1f, 1f) LC0 = %0\n"
"1: nop;"
:
- : "a" (15 * 7)
+ : "a" (15 * 10)
: "LC0", "LB0", "LT0"
);
{
native_machine_restart(cmd);
local_irq_disable();
- bfin_reset();
+ if (ANOMALY_05000353 || ANOMALY_05000386)
+ bfin_reset();
+ else
+ /* the bootrom checks to see how it was reset and will
+ * automatically perform a software reset for us when
+ * it starts executing boot
+ */
+ asm("raise 1;");
}
__attribute__((weak))
EXPORT_SYMBOL(memory_end);
EXPORT_SYMBOL(physical_mem_end);
EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
#ifdef CONFIG_MTD_UCLINUX
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
#endif
char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned int __initdata *__retx;
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+ *init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
/* boot memmap, for parsing "memmap=" */
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
-void __init bf53x_cache_init(void)
+void __init bfin_cache_init(void)
{
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
- generate_cpl_tables();
+ generate_cplb_tables();
#endif
#ifdef CONFIG_BFIN_ICACHE
#endif
}
-void __init bf53x_relocate_l1_mem(void)
+void __init bfin_relocate_l1_mem(void)
{
unsigned long l1_code_length;
unsigned long l1_data_a_length;
* [_rambase, _ramstart]: kernel image
* [memory_start, memory_end]: dynamic memory managed by kernel
* [memory_end, _ramend]: reserved memory
- * [meory_mtd_start(memory_end),
+ * [memory_mtd_start(memory_end),
* memory_mtd_start + mtd_size]: rootfs (if any)
* [_ramend - DMA_UNCACHED_REGION,
* _ramend]: uncached DMA region
_bfin_swrst = bfin_read_SWRST();
- /* If we double fault, reset the system - otherwise we hang forever */
- bfin_write_SWRST(DOUBLE_FAULT);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+ bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+ bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
- if (_bfin_swrst & RESET_DOUBLE)
- /*
- * don't decode the address, since you don't know if this
- * kernel's symbol map is the same as the crashing kernel
- */
- printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
- else if (_bfin_swrst & RESET_WDOG)
+ if (_bfin_swrst & RESET_DOUBLE) {
+ printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* We assume the crashing kernel, and the current symbol table match */
+ printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+ (int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+ printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+ printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+ printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+ init_retx);
+ } else if (_bfin_swrst & RESET_WDOG)
printk(KERN_INFO "Recovering from Watchdog event\n");
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
- if (bfin_revid() != bfin_compiled_revid()) {
- if (bfin_compiled_revid() == -1)
- printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
- bfin_revid());
- else if (bfin_compiled_revid() != 0xffff)
- printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
- bfin_compiled_revid(), bfin_revid());
+
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+ else {
+ if (bfin_revid() != bfin_compiled_revid()) {
+ if (bfin_compiled_revid() == -1)
+ printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
+ bfin_revid());
+ else if (bfin_compiled_revid() != 0xffff)
+ printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+ bfin_compiled_revid(), bfin_revid());
+ }
+ if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+ printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+ CPU, bfin_revid());
}
- if (bfin_revid() < SUPPORTED_REVID)
- printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
- CPU, bfin_revid());
+
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
init_exception_vectors();
- bf53x_cache_init();
+ bfin_cache_init();
}
static int __init topology_init(void)
}
seq_printf(m, "processor\t: %d\n"
- "vendor_id\t: %s\n"
- "cpu family\t: 0x%x\n"
- "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+ "vendor_id\t: %s\n",
+ *(unsigned int *)v,
+ vendor);
+
+ if (CPUID == bfin_cpuid())
+ seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+ else
+ seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+ CPUID, bfin_cpuid());
+
+ seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
"stepping\t: %d\n",
- 0,
- vendor,
- (bfin_read_CHIPID() & CHIPID_FAMILY),
cpu, cclk/1000000, sclk/1000000,
#ifdef CONFIG_MPU
"mpu on",
if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
dcache_size = 0;
- if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+ if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+ if (*pos == 0)
+ *pos = first_cpu(cpu_online_map);
+ if (*pos >= num_online_cpus())
+ return NULL;
+
+ return pos;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- ++*pos;
+ *pos = next_cpu(*pos, cpu_online_map);
+
return c_start(m, pos);
}
#include <linux/fs.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
+#include <asm/cplb.h>
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <linux/irq.h>
#include <asm/trace.h>
#include <asm/fixed_code.h>
-#include <asm/dma.h>
#ifdef CONFIG_KGDB
-# include <linux/debugger.h>
# include <linux/kgdb.h>
# define CHK_DEBUGGER_TRAP() \
do { \
- CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
+ kgdb_handle_exception(trapnr, sig, info.si_code, fp); \
} while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() \
do { \
# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
#endif
+
+#ifdef CONFIG_VERBOSE_DEBUG
+#define verbose_printk(fmt, arg...) \
+ printk(fmt, ##arg)
+#else
+#define verbose_printk(fmt, arg...) \
+ ({ if (0) printk(fmt, ##arg); 0; })
+#endif
+
/* Initiate the event table handler */
void __init trap_init(void)
{
CSYNC();
}
-unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
+/*
+ * Used to save the RETX, SEQSTAT, I/D CPLB FAULT ADDR
+ * values across the transition from exception to IRQ5.
+ * We put these in L1, so they are going to be in a valid
+ * location during exception context
+ */
+__attribute__((l1_data))
+unsigned long saved_retx, saved_seqstat,
+ saved_icplb_fault_addr, saved_dcplb_fault_addr;
static void decode_address(char *buf, unsigned long address)
{
+#ifdef CONFIG_DEBUG_VERBOSE
struct vm_list_struct *vml;
struct task_struct *p;
struct mm_struct *mm;
done:
write_unlock_irqrestore(&tasklist_lock, flags);
+#else
+ sprintf(buf, " ");
+#endif
}
asmlinkage void double_fault_c(struct pt_regs *fp)
{
console_verbose();
oops_in_progress = 1;
+#ifdef CONFIG_DEBUG_VERBOSE
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
- dump_bfin_process(fp);
- dump_bfin_mem(fp);
- show_regs(fp);
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+ if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+ char buf[150];
+ decode_address(buf, saved_retx);
+ printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+ (int)saved_seqstat & SEQSTAT_EXCAUSE, buf);
+ decode_address(buf, saved_dcplb_fault_addr);
+ printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf);
+ decode_address(buf, saved_icplb_fault_addr);
+ printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf);
+
+ decode_address(buf, fp->retx);
+ printk(KERN_NOTICE "The instruction at %s caused a double exception\n",
+ buf);
+ } else
+#endif
+ {
+ dump_bfin_process(fp);
+ dump_bfin_mem(fp);
+ show_regs(fp);
+ }
+#endif
panic("Double Fault - unrecoverable event\n");
}
return;
else
break;
+ /* 0x03 - User Defined, userspace stack overflow */
+ case VEC_EXCPT03:
+ info.si_code = SEGV_STACKFLOW;
+ sig = SIGSEGV;
+ verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
+ break;
+ /* 0x02 - KGDB initial connection and break signal trap */
+ case VEC_EXCPT02:
#ifdef CONFIG_KGDB
- case VEC_EXCPT02 : /* gdb connection */
info.si_code = TRAP_ILLTRAP;
sig = SIGTRAP;
CHK_DEBUGGER_TRAP();
return;
-#else
- /* 0x02 - User Defined, Caught by default */
#endif
- /* 0x03 - User Defined, userspace stack overflow */
- case VEC_EXCPT03:
- info.si_code = SEGV_STACKFLOW;
- sig = SIGSEGV;
- printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ /* 0x04 - User Defined */
+ /* 0x05 - User Defined */
+ /* 0x06 - User Defined */
+ /* 0x07 - User Defined */
+ /* 0x08 - User Defined */
+ /* 0x09 - User Defined */
+ /* 0x0A - User Defined */
+ /* 0x0B - User Defined */
+ /* 0x0C - User Defined */
+ /* 0x0D - User Defined */
+ /* 0x0E - User Defined */
+ /* 0x0F - User Defined */
+ /* If we got here, it is most likely that someone was trying to use a
+ * custom exception handler, and it is not actually installed properly
+ */
+ case VEC_EXCPT04 ... VEC_EXCPT15:
+ info.si_code = ILL_ILLPARAOP;
+ sig = SIGILL;
+ verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
- /* 0x04 - User Defined, Caught by default */
- /* 0x05 - User Defined, Caught by default */
- /* 0x06 - User Defined, Caught by default */
- /* 0x07 - User Defined, Caught by default */
- /* 0x08 - User Defined, Caught by default */
- /* 0x09 - User Defined, Caught by default */
- /* 0x0A - User Defined, Caught by default */
- /* 0x0B - User Defined, Caught by default */
- /* 0x0C - User Defined, Caught by default */
- /* 0x0D - User Defined, Caught by default */
- /* 0x0E - User Defined, Caught by default */
- /* 0x0F - User Defined, Caught by default */
/* 0x10 HW Single step, handled here */
case VEC_STEP:
info.si_code = TRAP_STEP;
case VEC_OVFLOW:
info.si_code = TRAP_TRACEFLOW;
sig = SIGTRAP;
- printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x12 - Reserved, Caught by default */
/* 0x13 - Reserved, Caught by default */
case VEC_UNDEF_I:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x22 - Illegal Instruction Combination, handled here */
case VEC_ILGAL_I:
info.si_code = ILL_ILLPARAOP;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x23 - Data CPLB protection violation, handled here */
case VEC_CPLB_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x24 - Data access misaligned, handled here */
case VEC_MISALI_D:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x25 - Unrecoverable Event, handled here */
case VEC_UNCOV:
info.si_code = ILL_ILLEXCPT;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
error case is handled here */
case VEC_CPLB_M:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
break;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
case VEC_CPLB_MHIT:
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_dcplb_fault_addr < FIXED_CODE_START)
- printk(KERN_NOTICE "NULL pointer access\n");
+ verbose_printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
- printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x28 - Emulation Watchpoint, handled here */
case VEC_WATCH:
case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
info.si_code = BUS_OPFETCH;
sig = SIGBUS;
- printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
#else
/* 0x29 - Reserved, Caught by default */
case VEC_MISALI_I:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x2B - Instruction CPLB protection violation, handled here */
case VEC_CPLB_I_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
case VEC_CPLB_I_M:
info.si_code = ILL_CPLB_MISS;
sig = SIGBUS;
- printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
break;
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
case VEC_CPLB_I_MHIT:
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_icplb_fault_addr < FIXED_CODE_START)
- printk(KERN_NOTICE "Jump to NULL address\n");
+ verbose_printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
- printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x2E - Illegal use of Supervisor Resource, handled here */
case VEC_ILL_RES:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
- CHK_DEBUGGER_TRAP();
+ verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
/* 0x2F - Reserved, Caught by default */
/* 0x30 - Reserved, Caught by default */
case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+ verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
break;
/* External Memory Addressing Error */
case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
info.si_code = BUS_ADRERR;
sig = SIGBUS;
- printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+ verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
break;
/* Performance Monitor Overflow */
case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
- printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+ verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
break;
/* RAISE 5 instruction */
case (SEQSTAT_HWERRCAUSE_RAISE_5):
printk(KERN_NOTICE HWC_default(KERN_NOTICE));
break;
}
- CHK_DEBUGGER_TRAP();
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
+ /*
+ * We should be handling all known exception types above,
+ * if we get here we hit a reserved one, so panic
+ */
default:
- info.si_code = TRAP_ILLTRAP;
- sig = SIGTRAP;
- printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
+ oops_in_progress = 1;
+ info.si_code = ILL_ILLPARAOP;
+ sig = SIGILL;
+ verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
(fp->seqstat & SEQSTAT_EXCAUSE));
- CHK_DEBUGGER_TRAP();
+ CHK_DEBUGGER_TRAP_MAYBE();
break;
}
BUG_ON(sig == 0);
if (sig != SIGTRAP) {
- unsigned long *stack;
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
/* Print out the trace buffer if it makes sense */
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
- printk(KERN_NOTICE "No trace since you do not have "
+ verbose_printk(KERN_NOTICE "No trace since you do not have "
"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
KERN_NOTICE "\n");
else
if (oops_in_progress) {
/* Dump the current kernel stack */
- printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+ verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
show_stack(current, NULL);
-
print_modules();
#ifndef CONFIG_ACCESS_CHECK
- printk(KERN_EMERG "Please turn on "
+ verbose_printk(KERN_EMERG "Please turn on "
"CONFIG_ACCESS_CHECK\n");
#endif
panic("Kernel exception");
} else {
+#ifdef CONFIG_VERBOSE_DEBUG
+ unsigned long *stack;
/* Dump the user space stack */
stack = (unsigned long *)rdusp();
- printk(KERN_NOTICE "Userspace Stack\n");
+ verbose_printk(KERN_NOTICE "Userspace Stack\n");
show_stack(NULL, stack);
+#endif
}
}
* Similar to get_user, do some address checking, then dereference
* Return true on sucess, false on bad address
*/
-bool get_instruction(unsigned short *val, unsigned short *address)
+static bool get_instruction(unsigned short *val, unsigned short *address)
{
unsigned long addr;
#if L1_CODE_LENGTH != 0
if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
- dma_memcpy(val, address, 2);
+ isram_memcpy(val, address, 2);
return true;
}
#endif
* These are the normal instructions which cause change of flow, which
* would be at the source of the trace buffer
*/
-void decode_instruction(unsigned short *address)
+#ifdef CONFIG_DEBUG_VERBOSE
+static void decode_instruction(unsigned short *address)
{
unsigned short opcode;
if (get_instruction(&opcode, address)) {
if (opcode == 0x0010)
- printk("RTS");
+ verbose_printk("RTS");
else if (opcode == 0x0011)
- printk("RTI");
+ verbose_printk("RTI");
else if (opcode == 0x0012)
- printk("RTX");
+ verbose_printk("RTX");
else if (opcode >= 0x0050 && opcode <= 0x0057)
- printk("JUMP (P%i)", opcode & 7);
+ verbose_printk("JUMP (P%i)", opcode & 7);
else if (opcode >= 0x0060 && opcode <= 0x0067)
- printk("CALL (P%i)", opcode & 7);
+ verbose_printk("CALL (P%i)", opcode & 7);
else if (opcode >= 0x0070 && opcode <= 0x0077)
- printk("CALL (PC+P%i)", opcode & 7);
+ verbose_printk("CALL (PC+P%i)", opcode & 7);
else if (opcode >= 0x0080 && opcode <= 0x0087)
- printk("JUMP (PC+P%i)", opcode & 7);
+ verbose_printk("JUMP (PC+P%i)", opcode & 7);
else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
- printk("IF !CC JUMP");
+ verbose_printk("IF !CC JUMP");
else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
- printk("IF CC JUMP");
+ verbose_printk("IF CC JUMP");
else if (opcode >= 0x2000 && opcode <= 0x2fff)
- printk("JUMP.S");
+ verbose_printk("JUMP.S");
else if (opcode >= 0xe080 && opcode <= 0xe0ff)
- printk("LSETUP");
+ verbose_printk("LSETUP");
else if (opcode >= 0xe200 && opcode <= 0xe2ff)
- printk("JUMP.L");
+ verbose_printk("JUMP.L");
else if (opcode >= 0xe300 && opcode <= 0xe3ff)
- printk("CALL pcrel");
+ verbose_printk("CALL pcrel");
else
- printk("0x%04x", opcode);
+ verbose_printk("0x%04x", opcode);
}
}
+#endif
void dump_bfin_trace_buffer(void)
{
+#ifdef CONFIG_DEBUG_VERBOSE
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
char buf[150];
trace_buffer_restore(tflags);
#endif
+#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
* Checks to see if the address pointed to is either a
* 16-bit CALL instruction, or a 32-bit CALL instruction
*/
-bool is_bfin_call(unsigned short *addr)
+static bool is_bfin_call(unsigned short *addr)
{
unsigned short opcode = 0, *ins_addr;
ins_addr = (unsigned short *)addr;
return false;
}
+
void show_stack(struct task_struct *task, unsigned long *stack)
{
+#ifdef CONFIG_PRINTK
unsigned int *addr, *endstack, *fp = 0, *frame;
unsigned short *ins_addr;
char buf[150];
} else
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+ printk(KERN_NOTICE "Stack info:\n");
decode_address(buf, (unsigned int)stack);
- printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+ printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
addr = (unsigned int *)((unsigned int)stack & ~0x3F);
/* First thing is to look for a frame pointer */
if (!j)
printk("\n");
}
-
+#endif
}
void dump_stack(void)
void dump_bfin_process(struct pt_regs *fp)
{
+#ifdef CONFIG_DEBUG_VERBOSE
/* We should be able to look at fp->ipend, but we don't push it on the
* stack all the time, so do this until we fix that */
unsigned int context = bfin_read_IPEND();
if (oops_in_progress)
- printk(KERN_EMERG "Kernel OOPS in progress\n");
+ verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
- printk(KERN_NOTICE "HW Error context\n");
+ verbose_printk(KERN_NOTICE "HW Error context\n");
else if (context & 0x0020)
- printk(KERN_NOTICE "Deferred Exception context\n");
+ verbose_printk(KERN_NOTICE "Deferred Exception context\n");
else if (context & 0x3FC0)
- printk(KERN_NOTICE "Interrupt context\n");
+ verbose_printk(KERN_NOTICE "Interrupt context\n");
else if (context & 0x4000)
- printk(KERN_NOTICE "Deferred Interrupt context\n");
+ verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
else if (context & 0x8000)
- printk(KERN_NOTICE "Kernel process context\n");
+ verbose_printk(KERN_NOTICE "Kernel process context\n");
/* Because we are crashing, and pointers could be bad, we check things
* pretty closely before we use them
*/
if ((unsigned long)current >= FIXED_CODE_START &&
!((unsigned long)current & 0x3) && current->pid) {
- printk(KERN_NOTICE "CURRENT PROCESS:\n");
+ verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
if (current->comm >= (char *)FIXED_CODE_START)
- printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n",
current->comm, current->pid);
else
- printk(KERN_NOTICE "COMM= invalid\n");
+ verbose_printk(KERN_NOTICE "COMM= invalid\n");
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
- printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
KERN_NOTICE "\n",
(void *)current->mm->start_code,
(void *)current->mm->brk,
(void *)current->mm->start_stack);
else
- printk(KERN_NOTICE "invalid mm\n");
+ verbose_printk(KERN_NOTICE "invalid mm\n");
} else
- printk(KERN_NOTICE "\n" KERN_NOTICE
+ verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
"No Valid process in current context\n");
+#endif
}
void dump_bfin_mem(struct pt_regs *fp)
{
+#ifdef CONFIG_DEBUG_VERBOSE
unsigned short *addr, *erraddr, val = 0, err = 0;
char sti = 0, buf[6];
erraddr = (void *)fp->pc;
- printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
+ verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
- printk("\n" KERN_NOTICE "0x%p: ", addr);
+ verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
- if (get_instruction(&val, addr)) {
+ if (!get_instruction(&val, addr)) {
val = 0;
sprintf(buf, "????");
} else
sprintf(buf, "%04x", val);
if (addr == erraddr) {
- printk("[%s]", buf);
+ verbose_printk("[%s]", buf);
err = val;
} else
- printk(" %s ", buf);
+ verbose_printk(" %s ", buf);
/* Do any previous instructions turn on interrupts? */
if (addr <= erraddr && /* in the past */
sti = 1;
}
- printk("\n");
+ verbose_printk("\n");
/* Hardware error interrupts can be deferred */
if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
oops_in_progress)){
- printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
+ verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
- printk(KERN_NOTICE "The remaining message may be meaningless\n"
+ verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
" better idea where it came from\n");
#else
/* And the last RETI points to the current userspace context */
if ((fp + 1)->pc >= current->mm->start_code &&
(fp + 1)->pc <= current->mm->end_code) {
- printk(KERN_NOTICE "It might be better to look around here : \n");
- printk(KERN_NOTICE "-------------------------------------------\n");
+ verbose_printk(KERN_NOTICE "It might be better to look around here : \n");
+ verbose_printk(KERN_NOTICE "-------------------------------------------\n");
show_regs(fp + 1);
- printk(KERN_NOTICE "-------------------------------------------\n");
+ verbose_printk(KERN_NOTICE "-------------------------------------------\n");
}
}
#endif
}
+#endif
}
void show_regs(struct pt_regs *fp)
{
+#ifdef CONFIG_DEBUG_VERBOSE
char buf [150];
struct irqaction *action;
unsigned int i;
unsigned long flags;
- printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
- printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
+ verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+ verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
(long)fp->seqstat, fp->ipend, fp->syscfg);
- printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
- (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
- printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
+ if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+ verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
+ (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+ /* If the error was from the EBIU, print it out */
+ if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+ verbose_printk(KERN_NOTICE " EBIU Error Reason : 0x%04x\n",
+ bfin_read_EBIU_ERRMST());
+ verbose_printk(KERN_NOTICE " EBIU Error Address : 0x%08x\n",
+ bfin_read_EBIU_ERRADD());
+ }
+#endif
+ }
+ verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
for (i = 6; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
- printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
+ verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
}
}
goto unlock;
decode_address(buf, (unsigned int)action->handler);
- printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf);
+ verbose_printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf);
for (action = action->next; action; action = action->next) {
decode_address(buf, (unsigned int)action->handler);
- printk(", %s", buf);
+ verbose_printk(", %s", buf);
}
- printk("\n");
+ verbose_printk("\n");
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}
decode_address(buf, fp->rete);
- printk(KERN_NOTICE " RETE: %s\n", buf);
+ verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
decode_address(buf, fp->retn);
- printk(KERN_NOTICE " RETN: %s\n", buf);
+ verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
decode_address(buf, fp->retx);
- printk(KERN_NOTICE " RETX: %s\n", buf);
+ verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
decode_address(buf, fp->rets);
- printk(KERN_NOTICE " RETS: %s\n", buf);
+ verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
decode_address(buf, fp->pc);
- printk(KERN_NOTICE " PC : %s\n", buf);
+ verbose_printk(KERN_NOTICE " PC : %s\n", buf);
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) &&
(((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
decode_address(buf, saved_dcplb_fault_addr);
- printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
+ verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, saved_icplb_fault_addr);
- printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
+ verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
- printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
+ verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
- printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
+ verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
fp->r4, fp->r5, fp->r6, fp->r7);
- printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
+ verbose_printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
fp->p0, fp->p1, fp->p2, fp->p3);
- printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
+ verbose_printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
fp->p4, fp->p5, fp->fp, (long)fp);
- printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
+ verbose_printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
fp->lb0, fp->lt0, fp->lc0);
- printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
+ verbose_printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
fp->lb1, fp->lt1, fp->lc1);
- printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
+ verbose_printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
fp->b0, fp->l0, fp->m0, fp->i0);
- printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
+ verbose_printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
fp->b1, fp->l1, fp->m1, fp->i1);
- printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
+ verbose_printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
fp->b2, fp->l2, fp->m2, fp->i2);
- printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
+ verbose_printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
fp->b3, fp->l3, fp->m3, fp->i3);
- printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ verbose_printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
- printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
+ verbose_printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
rdusp(), fp->astat);
- printk(KERN_NOTICE "\n");
+ verbose_printk(KERN_NOTICE "\n");
+#endif
}
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
help
CM-BF527 support for EVAL- and DEV-Board.
+config BFIN526_EZBRD
+ bool "BF526-EZBRD"
+ help
+ BF526-EZBRD/EZKIT Lite board support.
+
endchoice
obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN527_BLUETECHNIX_CM) += cm_bf527.o
+obj-$(CONFIG_BFIN526_EZBRD) += ezbrd.o
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PF11,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf527/boards/ezbrd.c
+ * Based on: arch/blackfin/mach-bf537/boards/stamp.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BF526-EZBRD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+ [0] = {
+ .start = 0xffc03800,
+ .end = 0xffc03cff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = IRQ_USB_INT0,
+ .end = IRQ_USB_INT0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+ [2] = { /* DMA IRQ */
+ .start = IRQ_USB_DMA,
+ .end = IRQ_USB_DMA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PG13,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+ .mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+ .mode = MUSB_PERIPHERAL,
+#endif
+ .config = &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &musb_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &musb_plat,
+ },
+ .num_resources = ARRAY_SIZE(musb_resources),
+ .resource = musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezbrd_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0x1C0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data ezbrd_flash_data = {
+ .width = 2,
+ .parts = ezbrd_partitions,
+ .nr_parts = ARRAY_SIZE(ezbrd_partitions),
+};
+
+static struct resource ezbrd_flash_resource = {
+ .start = 0x20000000,
+ .end = 0x203fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezbrd_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ezbrd_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ezbrd_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "linux kernel(nand)",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ },
+ {
+ .name = "file system(nand)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+ {
+ .start = NFC_CTL,
+ .end = NFC_DATA_RD + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf5xx_nand_device = {
+ .name = "bf5xx-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+ .resource = bf5xx_nand_resources,
+ .dev = {
+ .platform_data = &bf5xx_nand_platform,
+ },
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+ {
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF8,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &spi_ad7877_chip_info,
+ },
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+ {
+ .modalias = "wm8731",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5,
+ .controller_data = &spi_wm8731_chip_info,
+ .mode = SPI_MODE_0,
+ },
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+ {
+ .modalias = "bfin-lq035q1-spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &lq035q1_spi_chip_info,
+ .mode = SPI_CPHA | SPI_CPOL,
+ },
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+ },
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+ .irq = IRQ_PF8,
+ },
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_100, 400000000),
+ VRPAIR(VLEV_105, 426000000),
+ VRPAIR(VLEV_110, 500000000),
+ VRPAIR(VLEV_115, 533000000),
+ VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+ .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+ .use_bl = 1,
+ .gpio_bl = GPIO_PG12,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+ {
+ .start = IRQ_PPI_ERROR,
+ .end = IRQ_PPI_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_lq035q1_device = {
+ .name = "bfin-lq035q1",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
+ .resource = bfin_lq035q1_resources,
+ .dev = {
+ .platform_data = &bfin_lq035q1_data,
+ },
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+ &bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+ &musb_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+ &bfin_lq035q1_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezbrd_flash_device,
+#endif
+
+ &bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+ /* the MAC is stored in OTP memory page 0xDF */
+ u32 ret;
+ u64 otp_mac;
+ u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+ ret = otp_read(0xDF, 0x00, &otp_mac);
+ if (!(ret & 0x1)) {
+ char *otp_mac_p = (char *)&otp_mac;
+ for (ret = 0; ret < 6; ++ret)
+ addr[ret] = otp_mac_p[5 - ret];
+ }
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PG13,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
};
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <linux/input.h>
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+ /*.rotary_up_key = KEY_UP,*/
+ /*.rotary_down_key = KEY_DOWN,*/
+ .rotary_rel_code = REL_WHEEL,
+ .rotary_button_key = KEY_ENTER,
+ .debounce = 10, /* 0..17 */
+ .mode = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+ {
+ .start = IRQ_CNT,
+ .end = IRQ_CNT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_rotary_device = {
+ .name = "bfin-rotary",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_rotary_resources),
+ .resource = bfin_rotary_resources,
+ .dev = {
+ .platform_data = &bfin_rotary_data,
+ },
+};
+#endif
+
static struct resource bfin_gpios_resources = {
.start = 0,
.end = MAX_BLACKFIN_GPIOS - 1,
&bfin_device_gpiokeys,
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+ &bfin_rotary_device,
+#endif
+
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
*/
/* This file shoule be up to date with:
- * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
+ * - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
+ * - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+# define ANOMALY_BF526 1
+#else
+# define ANOMALY_BF526 0
+#endif
+#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
+# define ANOMALY_BF527 1
+#else
+# define ANOMALY_BF527 0
+#endif
+
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
-/* New Feature: EMAC TX DMA Word Alignment */
-#define ANOMALY_05000285 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (ANOMALY_BF527)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
+#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
+#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (1)
+#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (1)
+#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (1)
+#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0xE510
/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
+#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Security Features Are Not Functional */
-#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (ANOMALY_BF526)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (1)
+#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
#define ANOMALY_05000366 (1)
-/* New Feature: Higher Default CCLK Rate */
-#define ANOMALY_05000368 (1)
+/* Incorrect Default CSEL Value in PLL_DIV */
+#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (1)
-/* USB Full-speed Mode not Fully Tested */
-#define ANOMALY_05000381 (1)
-/* New Feature: Boot from OTP Memory */
-#define ANOMALY_05000385 (1)
-/* New Feature: bfrom_SysControl() Routine */
-#define ANOMALY_05000386 (1)
-/* New Feature: Programmable Preboot Settings */
-#define ANOMALY_05000387 (1)
+#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
+/* Host Must Not Read Back During Host DMA Boot */
+#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
/* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (1)
-/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (1)
-/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (1)
-/* New Feature: Log Buffer Functionality */
-#define ANOMALY_05000394 (1)
-/* New Feature: Hook Routine Functionality */
-#define ANOMALY_05000395 (1)
-/* New Feature: Header Indirect Bit */
-#define ANOMALY_05000396 (1)
-/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
-#define ANOMALY_05000397 (1)
-/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
-#define ANOMALY_05000398 (1)
-/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
-#define ANOMALY_05000399 (1)
+#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
+#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
+#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (1)
+#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* Incorrect Default Internal Voltage Regulator Setting */
+#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* DEB2_URGENT Bit Not Functional */
+#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
+#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
+#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
+#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+/* Internal Voltage Regulator Not Trimmed */
+#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
+#define ANOMALY_05000432 (ANOMALY_BF526)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#ifndef __MACH_BF527_H__
#define __MACH_BF527_H__
-#define SUPPORTED_REVID 2
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
#ifdef CONFIG_BF527
#define CPU "BF527"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF526
+#define CPU "BF526"
+#define CPUID 0x27e4
#endif
#ifdef CONFIG_BF525
#define CPU "BF525"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF524
+#define CPU "BF524"
+#define CPUID 0x27e4
+#endif
+#ifdef CONFIG_BF523
+#define CPU "BF523"
+#define CPUID 0x27e4
#endif
#ifdef CONFIG_BF522
#define CPU "BF522"
+#define CPUID 0x27e4
#endif
+
#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF527_H__ */
#define DPRESCALE 0xf /* Load Counter Register */
+/* CNT_COMMAND bit field options */
+
+#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_CONFIG bit field options */
+
+#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */
+#define CNTMODE_BINENC 0x0100 /* binary encoder mode */
+#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */
+#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */
+#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */
+
+#define BNDMODE_COMP 0x0000 /* boundary compare mode */
+#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */
+#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
+#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
+
/* Bit masks for OTP_CONTROL */
#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
#endif
+#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
+#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
+#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
+
#define P_HWAIT (P_DONTCARE)
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc
- * Copyright 2007 HV Sistemas S.L.
+ * Copyright 2007,2008 HV Sistemas S.L.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
- .end = 0x20300000 + 1,
+ .end = 0x20300002,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 0x20300000 + 4,
- .end = 0x20300000 + 5,
+ .start = 0x20300004,
+ .end = 0x20300006,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_PF10,
.end = IRQ_PF10,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
},
};
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader(spi)",
- .size = 0x00060000,
+ .name = "bootloader (spi)",
+ .size = 0x40000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel(spi)",
- .size = 0x100000,
- .offset = 0x60000
+ .name = "fpga (spi)",
+ .size = 0x30000,
+ .offset = 0x40000
}, {
- .name = "file system(spi)",
- .size = 0x6a0000,
- .offset = 0x00160000,
+ .name = "linux kernel (spi)",
+ .size = 0x150000,
+ .offset = 0x70000
+ }, {
+ .name = "jffs2 root file system (spi)",
+ .size = 0x640000,
+ .offset = 0x1c0000,
}
};
static struct plat_serial8250_port serial8250_platform_data [] = {
{
- .membase = 0x20200000,
+ .membase = (void *)0x20200000,
.mapbase = 0x20200000,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
.regshift = 1,
.uartclk = 66666667,
}, {
- .membase = 0x20200010,
+ .membase = (void *)0x20200010,
.mapbase = 0x20200010,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
*/
/* This file shoule be up to date with:
- * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ * - Revision D, 06/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
/* UART STB Bit Incorrectly Affects Receiver Setting */
#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
-#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
/* Incorrect Revision Number in DSPID Register */
#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
-#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000265 (1)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
/* Writes to Synchronous SDRAM Memory May Be Lost */
-#define ANOMALY_05000273 (1)
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
#define ANOMALY_05000276 (1)
/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
-#define ANOMALY_05000277 (1)
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
-#define ANOMALY_05000278 (1)
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
/* False Hardware Error Exception When ISR Context Is Not Restored */
-#define ANOMALY_05000281 (1)
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
-#define ANOMALY_05000282 (1)
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
-#define ANOMALY_05000283 (1)
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
-#define ANOMALY_05000288 (1)
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
-#define ANOMALY_05000311 (1)
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
/* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000313 (1)
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
-#define ANOMALY_05000315 (1)
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
-#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
/* UART Break Signal Issues */
#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
#define ANOMALY_05000366 (1)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
#endif
#ifndef __MACH_BF533_H__
#define __MACH_BF533_H__
-#define SUPPORTED_REVID 2
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
#ifdef CONFIG_BF533
#define CPU "BF533"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
#endif
#ifdef CONFIG_BF532
#define CPU "BF532"
-#define CPUID 0x0275A000
+#define CPUID 0x275A
#endif
#ifdef CONFIG_BF531
#define CPU "BF531"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
#endif
+
#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF533_H__ */
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
-# if ANOMALY_05000230
+# if ANOMALY_05000363
unsigned int anomaly_threshold;
# endif
#endif
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#include <linux/spi/ad7877.h>
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#include <linux/spi/ad7879.h>
+static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+ .model = 7879, /* Model = AD7879 */
+ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
+ .pressure_max = 10000,
+ .pressure_min = 0,
+ .first_conversion_delay = 3, /* wait 512us before do a first conversion */
+ .acquisition_time = 1, /* 4us acquisition time per sample */
+ .median = 2, /* do 8 measurements */
+ .averaging = 1, /* take the average of 4 middle samples */
+ .pen_down_acc_interval = 255, /* 9.4 ms */
+ .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */
+ .gpio_default = 1, /* During initialization set GPIO = HIGH */
+};
+#endif
+
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = {
.enable_dma = 0,
};
#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+ {
+ .modalias = "ad7879",
+ .platform_data = &bfin_ad7879_ts_info,
+ .irq = IRQ_PF7,
+ .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spi_ad7879_chip_info,
+ .mode = SPI_CPHA | SPI_CPOL,
+ },
+#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
{
.modalias = "spidev",
.controller_data = &spidev_chip_info,
},
#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+ {
+ .modalias = "bfin-lq035q1-spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &lq035q1_spi_chip_info,
+ .mode = SPI_CPHA | SPI_CPOL,
+ },
+#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
};
#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+ .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+ .use_bl = 0, /* let something else control the LCD Blacklight */
+ .gpio_bl = GPIO_PF7,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+ {
+ .start = IRQ_PPI_ERROR,
+ .end = IRQ_PPI_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_lq035q1_device = {
+ .name = "bfin-lq035q1",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
+ .resource = bfin_lq035q1_resources,
+ .dev = {
+ .platform_data = &bfin_lq035q1_data,
+ },
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_fb_device,
#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+ &bfin_lq035q1_device,
+#endif
+
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
&bfin_fb_adv7393_device,
#endif
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
#define ANOMALY_05000266 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000386 (1)
#endif
#ifndef __MACH_BF537_H__
#define __MACH_BF537_H__
-#define SUPPORTED_REVID 2
-
/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */
#ifdef CONFIG_BF537
#define CPU "BF537"
-#define CPUID 0x027c8000
+#define CPUID 0x27c8
#endif
#ifdef CONFIG_BF536
#define CPU "BF536"
-#define CPUID 0x027c8000
+#define CPUID 0x27c8
#endif
#ifdef CONFIG_BF534
#define CPU "BF534"
-#define CPUID 0x027c6000
+#define CPUID 0x27c6
#endif
+
#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF537_H__ */
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
#include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
{
.start = 0xFFC03100,
.end = 0xFFC031FF,
+ .flags = IORESOURCE_MEM,
},
#endif
};
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PH6,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
- .offset = 4 * SIZE_1M,
- .size = (256 - 4) * SIZE_1M,
+ .offset = 4 * 1024 * 1024,
+ .size = (256 - 4) * 1024 * 1024,
},
};
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
#include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
};
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+ /*.rotary_up_key = KEY_UP,*/
+ /*.rotary_down_key = KEY_DOWN,*/
+ .rotary_rel_code = REL_WHEEL,
+ .rotary_button_key = KEY_ENTER,
+ .debounce = 10, /* 0..17 */
+ .mode = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+ {
+ .start = IRQ_CNT,
+ .end = IRQ_CNT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_rotary_device = {
+ .name = "bfin-rotary",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_rotary_resources),
+ .resource = bfin_rotary_resources,
+ .dev = {
+ .platform_data = &bfin_rotary_data,
+ },
+};
+#endif
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PE7,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
.offset = 0,
}, {
.name = "linux kernel(nor)",
- .size = 0x1C0000,
+ .size = 0x400000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(nor)",
static struct resource ezkit_flash_resource = {
.start = 0x20000000,
- .end = 0x20ffffff,
+ .end = 0x21ffffff,
.flags = IORESOURCE_MEM,
};
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PJ11,
+ .irq = IRQ_PJ11, /* newer boards (Rev 1.4+) use IRQ_PB4 */
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 2,
&bf54x_kpad_device,
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+ &bfin_rotary_device,
+#endif
+
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
w[p0] = r0.l;
ssync;
-#if defined(CONFIG_BF54x)
+ /* enable self refresh via SRREQ */
P2.H = hi(EBIU_RSTCTL);
P2.L = lo(EBIU_RSTCTL);
R0 = [P2];
BITSET (R0, 3);
-#else
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
-#endif
[P2] = R0;
SSYNC;
-#if defined(CONFIG_BF54x)
+
+ /* wait for SRACK bit to be set */
.LSRR_MODE:
R0 = [P2];
CC = BITTST(R0, 4);
if !CC JUMP .LSRR_MODE;
-#endif
r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
r0 = r0 << 9; /* Shift it over, */
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
w[p0] = r0.l;
ssync;
-#if defined(CONFIG_BF54x)
+ /* disable self refresh by clearing SRREQ */
P2.H = hi(EBIU_RSTCTL);
P2.L = lo(EBIU_RSTCTL);
R0 = [P2];
r0.h = hi(mem_DDRCTL2);
[p0] = r0;
ssync;
-#else
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- p0.l = LO(EBIU_SDBCTL);
- p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
- r0 = mem_SDBCTL;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-#endif
RTS;
ENDPROC(_start_dma_code)
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
/* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
/* Synchronous Burst Flash Boot Mode Is Not Functional */
#define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
-/* Host DMA Boot Mode Is Not Functional */
+/* Host DMA Boot Modes Are Not Functional */
#define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
#define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
#define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
/* USB Calibration Value Is Not Intialized */
#define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
#define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
/* Data Lost when Core Reads SDH Data FIFO */
#define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
/* PLL Status Register Is Inaccurate */
#define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
#define ANOMALY_05000357 (1)
/* External Memory Read Access Hangs Core With PLL Bypass */
#define ANOMALY_05000360 (1)
/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
#define ANOMALY_05000365 (1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
-#define ANOMALY_05000378 (1)
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Some ATAPI Modes Are Not Functional */
+#define ANOMALY_05000383 (1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#ifndef __MACH_BF548_H__
#define __MACH_BF548_H__
-#define SUPPORTED_REVID 0
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
#if defined(CONFIG_BF542)
# define CPU "BF542"
-# define CPUID 0x027c8000
+# define CPUID 0x27de
#elif defined(CONFIG_BF544)
-# define CPU "BF544"
-# define CPUID 0x027c8000
+# define CPU "BF544"
+# define CPUID 0x27de
#elif defined(CONFIG_BF547)
-# define CPU "BF547"
+# define CPU "BF547"
+# define CPUID 0x27de
#elif defined(CONFIG_BF548)
-# define CPU "BF548"
-# define CPUID 0x027c6000
+# define CPU "BF548"
+# define CPUID 0x27de
#elif defined(CONFIG_BF549)
-# define CPU "BF549"
-#else
-# define CPU "UNKNOWN"
-# define CPUID 0x0
+# define CPU "BF549"
+# define CPUID 0x27de
+#endif
+
+#ifndef CPU
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF48_H__ */
#endif /*CONFIG_BFIN_DCACHE*/
/* Level 2 Memory */
-#if !defined(CONFIG_BF542)
-# define L2_START 0xFEB00000
-# if defined(CONFIG_BF544)
-# define L2_LENGTH 0x10000
-# else
-# define L2_LENGTH 0x20000
-# endif
+#define L2_START 0xFEB00000
+#if defined(CONFIG_BF542)
+# define L2_LENGTH 0
+#elif defined(CONFIG_BF544)
+# define L2_LENGTH 0x10000
+#else
+# define L2_LENGTH 0x20000
#endif
/* Scratch Pad Memory */
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
#define ANOMALY_05000183 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
#endif
#ifndef __MACH_BF561_H__
#define __MACH_BF561_H__
-#define SUPPORTED_REVID 0x3
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
#ifdef CONFIG_BF561
#define CPU "BF561"
-#define CPUID 0x027bb000
+#define CPUID 0x27bb
#endif
+
#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF561_H__ */
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
-# if ANOMALY_05000230
+# if ANOMALY_05000363
unsigned int anomaly_threshold;
# endif
#endif
/* Memory Map for ADSP-BF561 processors */
#ifdef CONFIG_BF561
-#define L1_CODE_START 0xFFA00000
-#define L1_DATA_A_START 0xFF800000
-#define L1_DATA_B_START 0xFF900000
+#define COREA_L1_CODE_START 0xFFA00000
+#define COREA_L1_DATA_A_START 0xFF800000
+#define COREA_L1_DATA_B_START 0xFF900000
+#define COREB_L1_CODE_START 0xFF600000
+#define COREB_L1_DATA_A_START 0xFF400000
+#define COREB_L1_DATA_B_START 0xFF500000
+
+#define L1_CODE_START COREA_L1_CODE_START
+#define L1_DATA_A_START COREA_L1_DATA_A_START
+#define L1_DATA_B_START COREA_L1_DATA_B_START
#define L1_CODE_LENGTH 0x4000
/* Scratch Pad Memory */
-#define L1_SCRATCH_START 0xFFB00000
+#define COREA_L1_SCRATCH_START 0xFFB00000
+#define COREB_L1_SCRATCH_START 0xFF700000
+
+#define L1_SCRATCH_START COREA_L1_SCRATCH_START
#define L1_SCRATCH_LENGTH 0x1000
#endif /* _MEM_MAP_533_H_ */
#else
call __cplb_hdr;
#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* While we were processing this, did we double fault? */
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ r6 = 0x25;
+ CC = R7 == R6;
+ if CC JUMP _double_fault;
+#endif
+
DEBUG_HWTRACE_RESTORE(p5, r7)
RESTORE_ALL_SYS
SP = EX_SCRATCH_REG;
ENDPROC(_ex_icplb_miss)
ENTRY(_ex_syscall)
- (R7:6,P5:4) = [sp++];
- ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
- sp = EX_SCRATCH_REG;
- rtx
+ jump.s _bfin_return_from_exception;
ENDPROC(_ex_syscall)
ENTRY(_ex_soft_bp)
if cc jump .Lfind_priority_done;
jump.s .Lfind_priority_start;
.Lfind_priority_done:
- p4.l = _debugger_step;
- p4.h = _debugger_step;
+ p4.l = _kgdb_single_step;
+ p4.h = _kgdb_single_step;
r6 = [p4];
cc = r6 == 0;
if cc jump .Ldo_single_step;
R7=LC1;
LC1=R7;
#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* While we were processing the current exception,
+ * did we cause another, and double fault?
+ */
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ r6 = 0x25;
+ CC = R7 == R6;
+ if CC JUMP _double_fault;
+
+ /* Did we cause a HW error? */
+ p5.l = lo(ILAT);
+ p5.h = hi(ILAT);
+ r6 = [p5];
+ r7 = 0x20; /* Did I just cause anther HW error? */
+ r7 = r7 & r1;
+ CC = R7 == R6;
+ if CC JUMP _double_fault;
+#endif
+
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
sp = EX_SCRATCH_REG;
[p4] = p5;
csync;
+#ifndef CONFIG_DEBUG_DOUBLEFAULT
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+ * but they are not very interesting, so don't save them
+ */
+
p4.l = lo(DCPLB_FAULT_ADDR);
p4.h = hi(DCPLB_FAULT_ADDR);
r7 = [p4];
p5.l = _saved_icplb_fault_addr;
[p5] = r7;
- p4.l = _excpt_saved_stuff;
- p4.h = _excpt_saved_stuff;
-
r6 = retx;
+ p4.l = _saved_retx;
+ p4.h = _saved_retx;
[p4] = r6;
-
+#endif
r6 = SYSCFG;
[p4 + 4] = r6;
BITCLR(r6, 0);
r6 = 0x3f;
sti r6;
- (R7:6,P5:4) = [sp++];
- ASTAT = [sp++];
- SP = EX_SCRATCH_REG;
raise 5;
- rtx;
+ jump.s _bfin_return_from_exception;
ENDPROC(_ex_trap_c)
/* We just realized we got an exception, while we were processing a different
* exception. This is a unrecoverable event, so crash
*/
ENTRY(_double_fault)
- /* Turn caches & protection off, to ensure we don't get any more
- * double exceptions
- */
-
- P4.L = LO(IMEM_CONTROL);
- P4.H = HI(IMEM_CONTROL);
-
- R5 = [P4]; /* Control Register*/
- BITCLR(R5,ENICPLB_P);
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P4] = R5;
- SSYNC;
-
- P4.L = LO(DMEM_CONTROL);
- P4.H = HI(DMEM_CONTROL);
- R5 = [P4];
- BITCLR(R5,ENDCPLB_P);
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P4] = R5;
- SSYNC;
-
- /* Fix up the stack */
- (R7:6,P5:4) = [sp++];
- ASTAT = [sp++];
- SP = EX_SCRATCH_REG;
-
- /* We should be out of the exception stack, and back down into
- * kernel or user space stack
- */
- SAVE_ALL_SYS
+ /* Turn caches & protection off, to ensure we don't get any more
+ * double exceptions
+ */
+
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
+
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+
+ /* Fix up the stack */
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = EX_SCRATCH_REG;
+
+ /* We should be out of the exception stack, and back down into
+ * kernel or user space stack
+ */
+ SAVE_ALL_SYS
/* The dumping functions expect the return address in the RETI
* slot. */
r6 = retx;
[sp + PT_PC] = r6;
- r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
- SP += -12;
- call _double_fault_c;
- SP += 12;
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ call _double_fault_c;
+ SP += 12;
.L_double_fault_panic:
JUMP .L_double_fault_panic
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
- p4.l = _excpt_saved_stuff;
- p4.h = _excpt_saved_stuff;
+ p4.l = _saved_retx;
+ p4.h = _saved_retx;
r6 = [p4];
[sp + PT_PC] = r6;
call _trap_c;
SP += 12;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* Grab ILAT */
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ r1 = 0x20; /* Did I just cause anther HW error? */
+ r0 = r0 & r1;
+ CC = R0 == R1;
+ if CC JUMP _double_fault;
+#endif
+
call _ret_from_exception;
RESTORE_ALL_SYS
rti;
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
[--sp] = (R7:6,P5:4);
+
+#if ANOMALY_05000283 || ANOMALY_05000315
+ cc = r7 == r7;
+ p5.h = HI(CHIPID);
+ p5.l = LO(CHIPID);
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
+ * but they are not very interesting, so don't save them
+ */
+
+ p4.l = lo(DCPLB_FAULT_ADDR);
+ p4.h = hi(DCPLB_FAULT_ADDR);
+ r7 = [p4];
+ p5.h = _saved_dcplb_fault_addr;
+ p5.l = _saved_dcplb_fault_addr;
+ [p5] = r7;
+
+ r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)];
+ p5.h = _saved_icplb_fault_addr;
+ p5.l = _saved_icplb_fault_addr;
+ [p5] = r7;
+
+ p4.l = _saved_retx;
+ p4.h = _saved_retx;
+ r6 = retx;
+ [p4] = r6;
+
r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ p4.l = _saved_seqstat;
+ p4.h = _saved_seqstat;
+ [p4] = r7;
+#else
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+#endif
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
rts;
ENDPROC(_system_call)
+/* Do not mark as ENTRY() to avoid error in assembler ...
+ * this symbol need not be global anyways, so ...
+ */
_sys_trace:
call _syscall_trace;
SAVE_ALL_SYS
trace_buffer_stop(p0,r0);
+#if ANOMALY_05000283 || ANOMALY_05000315
+ cc = r5 == r5;
+ p4.h = HI(CHIPID);
+ p4.l = LO(CHIPID);
+ if cc jump 1f;
+ r5.l = W[p4];
+1:
+#endif
+
/* Turn caches off, to ensure we don't get double exceptions */
P4.L = LO(IMEM_CONTROL);
*/
.long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
+#ifdef CONFIG_KGDB
+ .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
+ and break signal trap */
+#else
.long _ex_replaceable /* 0x02 - User Defined */
+#endif
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
.long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
.long _ex_replaceable /* 0x05 - User Defined */
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
-
- /*
- * Used to save the real RETX, IMASK and SYSCFG when temporarily
- * storing safe values across the transition from exception to IRQ5.
- */
-_excpt_saved_stuff:
- .long 0;
- .long 0;
- .long 0;
+END(_sys_call_table)
_exception_stack:
.rept 1024
M2 = r0;
M3 = r0;
+ /*
+ * Clear ITEST_COMMAND and DTEST_COMMAND registers,
+ * Leaving these as non-zero can confuse the emulator
+ */
+ p0.L = LO(DTEST_COMMAND);
+ p0.H = HI(DTEST_COMMAND);
+ [p0] = R0;
+ [p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0;
+ CSYNC;
+
trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
[p0] = R0;
SSYNC;
- /* Save RETX, in case of doublefault */
- p0.l = ___retx;
- p0.h = ___retx;
+ /* in case of double faults, save a few things */
+ p0.l = _init_retx;
+ p0.h = _init_retx;
R0 = RETX;
[P0] = R0;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* Only save these if we are storing them,
+ * This happens here, since L1 gets clobbered
+ * below
+ */
+ p0.l = _saved_retx;
+ p0.h = _saved_retx;
+ p1.l = _init_saved_retx;
+ p1.h = _init_saved_retx;
+ r0 = [p0];
+ [p1] = r0;
+
+ p0.l = _saved_dcplb_fault_addr;
+ p0.h = _saved_dcplb_fault_addr;
+ p1.l = _init_saved_dcplb_fault_addr;
+ p1.h = _init_saved_dcplb_fault_addr;
+ r0 = [p0];
+ [p1] = r0;
+
+ p0.l = _saved_icplb_fault_addr;
+ p0.h = _saved_icplb_fault_addr;
+ p1.l = _init_saved_icplb_fault_addr;
+ p1.h = _init_saved_icplb_fault_addr;
+ r0 = [p0];
+ [p1] = r0;
+
+ p0.l = _saved_seqstat;
+ p0.h = _saved_seqstat;
+ p1.l = _init_saved_seqstat;
+ p1.h = _init_saved_seqstat;
+ r0 = [p0];
+ [p1] = r0;
+#endif
+
/* Initialize stack pointer */
sp.l = lo(INITIAL_STACK);
sp.h = hi(INITIAL_STACK);
#endif
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
+ call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
call _start_dma_code;
#endif
fp = 0;
#endif
-#if ANOMALY_05000283
+#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = HI(CHIPID);
p5.l = LO(CHIPID);
call _trap_c;
SP += 12;
+#ifdef EBIU_ERRMST
+ /* make sure EBIU_ERRMST is clear */
+ p0.l = LO(EBIU_ERRMST);
+ p0.h = HI(EBIU_ERRMST);
+ r0.l = (CORE_ERROR | CORE_MERROR);
+ w[p0] = r0.l;
+#endif
+
call _ret_from_exception;
+
.Lcommon_restore_all_sys:
RESTORE_ALL_SYS
rti;
#endif
static struct irq_chip bfin_core_irqchip = {
+ .name = "CORE",
.ack = bfin_ack_noop,
.mask = bfin_core_mask_irq,
.unmask = bfin_core_unmask_irq,
};
static struct irq_chip bfin_internal_irqchip = {
+ .name = "INTN",
.ack = bfin_ack_noop,
.mask = bfin_internal_mask_irq,
.unmask = bfin_internal_unmask_irq,
}
static struct irq_chip bfin_generic_error_irqchip = {
+ .name = "ERROR",
.ack = bfin_ack_noop,
.mask_ack = bfin_generic_error_mask_irq,
.mask = bfin_generic_error_mask_irq,
}
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
+static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ /* May not call generic set_irq_handler() due to spinlock
+ recursion. */
+ desc->handle_irq = handle;
+}
+
#if !defined(CONFIG_BF54x)
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
SSYNC();
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_irq_handler(irq, handle_edge_irq);
+ bfin_set_irq_handler(irq, handle_edge_irq);
else
- set_irq_handler(irq, handle_level_irq);
+ bfin_set_irq_handler(irq, handle_level_irq);
return 0;
}
#endif
static struct irq_chip bfin_gpio_irqchip = {
+ .name = "GPIO",
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
.mask_ack = bfin_gpio_mask_ack_irq,
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
pint[bank]->edge_set = pintbit;
- set_irq_handler(irq, handle_edge_irq);
+ bfin_set_irq_handler(irq, handle_edge_irq);
} else {
pint[bank]->edge_clear = pintbit;
- set_irq_handler(irq, handle_level_irq);
+ bfin_set_irq_handler(irq, handle_level_irq);
}
SSYNC();
#endif
static struct irq_chip bfin_gpio_irqchip = {
+ .name = "GPIO",
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
.mask_ack = bfin_gpio_mask_ack_irq,
vec = ivg->irqno;
}
asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
- kgdb_process_breakpoint();
-#endif
}
# arch/blackfin/mm/Makefile
#
-obj-y := blackfin_sram.o init.o
+obj-y := sram-alloc.o isram-driver.o init.o
+++ /dev/null
-/*
- * File: arch/blackfin/mm/blackfin_sram.c
- * Based on:
- * Author:
- *
- * Created:
- * Description: SRAM driver for Blackfin ADSP-BF5xx
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/rtc.h>
-#include <asm/blackfin.h>
-#include "blackfin_sram.h"
-
-static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-static spinlock_t l2_sram_lock;
-
-/* the data structure for L1 scratchpad and DATA SRAM */
-struct sram_piece {
- void *paddr;
- int size;
- pid_t pid;
- struct sram_piece *next;
-};
-
-static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
-
-#if L1_DATA_A_LENGTH != 0
-static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
-#endif
-
-#if L1_DATA_B_LENGTH != 0
-static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
-#endif
-
-#if L1_CODE_LENGTH != 0
-static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
-#endif
-
-#if L2_LENGTH != 0
-static struct sram_piece free_l2_sram_head, used_l2_sram_head;
-#endif
-
-static struct kmem_cache *sram_piece_cache;
-
-/* L1 Scratchpad SRAM initialization function */
-static void __init l1sram_init(void)
-{
- free_l1_ssram_head.next =
- kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
- if (!free_l1_ssram_head.next) {
- printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
- return;
- }
-
- free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
- free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
- free_l1_ssram_head.next->pid = 0;
- free_l1_ssram_head.next->next = NULL;
-
- used_l1_ssram_head.next = NULL;
-
- /* mutex initialize */
- spin_lock_init(&l1sram_lock);
-
- printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
- L1_SCRATCH_LENGTH >> 10);
-}
-
-static void __init l1_data_sram_init(void)
-{
-#if L1_DATA_A_LENGTH != 0
- free_l1_data_A_sram_head.next =
- kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
- if (!free_l1_data_A_sram_head.next) {
- printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
- return;
- }
-
- free_l1_data_A_sram_head.next->paddr =
- (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
- free_l1_data_A_sram_head.next->size =
- L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
- free_l1_data_A_sram_head.next->pid = 0;
- free_l1_data_A_sram_head.next->next = NULL;
-
- used_l1_data_A_sram_head.next = NULL;
-
- printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
- L1_DATA_A_LENGTH >> 10,
- free_l1_data_A_sram_head.next->size >> 10);
-#endif
-#if L1_DATA_B_LENGTH != 0
- free_l1_data_B_sram_head.next =
- kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
- if (!free_l1_data_B_sram_head.next) {
- printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
- return;
- }
-
- free_l1_data_B_sram_head.next->paddr =
- (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
- free_l1_data_B_sram_head.next->size =
- L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
- free_l1_data_B_sram_head.next->pid = 0;
- free_l1_data_B_sram_head.next->next = NULL;
-
- used_l1_data_B_sram_head.next = NULL;
-
- printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
- L1_DATA_B_LENGTH >> 10,
- free_l1_data_B_sram_head.next->size >> 10);
-#endif
-
- /* mutex initialize */
- spin_lock_init(&l1_data_sram_lock);
-}
-
-static void __init l1_inst_sram_init(void)
-{
-#if L1_CODE_LENGTH != 0
- free_l1_inst_sram_head.next =
- kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
- if (!free_l1_inst_sram_head.next) {
- printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
- return;
- }
-
- free_l1_inst_sram_head.next->paddr =
- (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
- free_l1_inst_sram_head.next->size =
- L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
- free_l1_inst_sram_head.next->pid = 0;
- free_l1_inst_sram_head.next->next = NULL;
-
- used_l1_inst_sram_head.next = NULL;
-
- printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
- L1_CODE_LENGTH >> 10,
- free_l1_inst_sram_head.next->size >> 10);
-#endif
-
- /* mutex initialize */
- spin_lock_init(&l1_inst_sram_lock);
-}
-
-static void __init l2_sram_init(void)
-{
-#if L2_LENGTH != 0
- free_l2_sram_head.next =
- kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
- if (!free_l2_sram_head.next) {
- printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
- return;
- }
-
- free_l2_sram_head.next->paddr = (void *)L2_START +
- (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
- free_l2_sram_head.next->size = L2_LENGTH -
- (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
- free_l2_sram_head.next->pid = 0;
- free_l2_sram_head.next->next = NULL;
-
- used_l2_sram_head.next = NULL;
-
- printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
- L2_LENGTH >> 10,
- free_l2_sram_head.next->size >> 10);
-#endif
-
- /* mutex initialize */
- spin_lock_init(&l2_sram_lock);
-}
-void __init bfin_sram_init(void)
-{
- sram_piece_cache = kmem_cache_create("sram_piece_cache",
- sizeof(struct sram_piece),
- 0, SLAB_PANIC, NULL);
-
- l1sram_init();
- l1_data_sram_init();
- l1_inst_sram_init();
- l2_sram_init();
-}
-
-/* SRAM allocate function */
-static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
- struct sram_piece *pused_head)
-{
- struct sram_piece *pslot, *plast, *pavail;
-
- if (size <= 0 || !pfree_head || !pused_head)
- return NULL;
-
- /* Align the size */
- size = (size + 3) & ~3;
-
- pslot = pfree_head->next;
- plast = pfree_head;
-
- /* search an available piece slot */
- while (pslot != NULL && size > pslot->size) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (!pslot)
- return NULL;
-
- if (pslot->size == size) {
- plast->next = pslot->next;
- pavail = pslot;
- } else {
- pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
-
- if (!pavail)
- return NULL;
-
- pavail->paddr = pslot->paddr;
- pavail->size = size;
- pslot->paddr += size;
- pslot->size -= size;
- }
-
- pavail->pid = current->pid;
-
- pslot = pused_head->next;
- plast = pused_head;
-
- /* insert new piece into used piece list !!! */
- while (pslot != NULL && pavail->paddr < pslot->paddr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- pavail->next = pslot;
- plast->next = pavail;
-
- return pavail->paddr;
-}
-
-/* Allocate the largest available block. */
-static void *_sram_alloc_max(struct sram_piece *pfree_head,
- struct sram_piece *pused_head,
- unsigned long *psize)
-{
- struct sram_piece *pslot, *pmax;
-
- if (!pfree_head || !pused_head)
- return NULL;
-
- pmax = pslot = pfree_head->next;
-
- /* search an available piece slot */
- while (pslot != NULL) {
- if (pslot->size > pmax->size)
- pmax = pslot;
- pslot = pslot->next;
- }
-
- if (!pmax)
- return NULL;
-
- *psize = pmax->size;
-
- return _sram_alloc(*psize, pfree_head, pused_head);
-}
-
-/* SRAM free function */
-static int _sram_free(const void *addr,
- struct sram_piece *pfree_head,
- struct sram_piece *pused_head)
-{
- struct sram_piece *pslot, *plast, *pavail;
-
- if (!pfree_head || !pused_head)
- return -1;
-
- /* search the relevant memory slot */
- pslot = pused_head->next;
- plast = pused_head;
-
- /* search an available piece slot */
- while (pslot != NULL && pslot->paddr != addr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (!pslot)
- return -1;
-
- plast->next = pslot->next;
- pavail = pslot;
- pavail->pid = 0;
-
- /* insert free pieces back to the free list */
- pslot = pfree_head->next;
- plast = pfree_head;
-
- while (pslot != NULL && addr > pslot->paddr) {
- plast = pslot;
- pslot = pslot->next;
- }
-
- if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
- plast->size += pavail->size;
- kmem_cache_free(sram_piece_cache, pavail);
- } else {
- pavail->next = plast->next;
- plast->next = pavail;
- plast = pavail;
- }
-
- if (pslot && plast->paddr + plast->size == pslot->paddr) {
- plast->size += pslot->size;
- plast->next = pslot->next;
- kmem_cache_free(sram_piece_cache, pslot);
- }
-
- return 0;
-}
-
-int sram_free(const void *addr)
-{
- if (0) {}
-#if L1_CODE_LENGTH != 0
- else if (addr >= (void *)L1_CODE_START
- && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
- return l1_inst_sram_free(addr);
-#endif
-#if L1_DATA_A_LENGTH != 0
- else if (addr >= (void *)L1_DATA_A_START
- && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
- return l1_data_A_sram_free(addr);
-#endif
-#if L1_DATA_B_LENGTH != 0
- else if (addr >= (void *)L1_DATA_B_START
- && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
- return l1_data_B_sram_free(addr);
-#endif
-#if L2_LENGTH != 0
- else if (addr >= (void *)L2_START
- && addr < (void *)(L2_START + L2_LENGTH))
- return l2_sram_free(addr);
-#endif
- else
- return -1;
-}
-EXPORT_SYMBOL(sram_free);
-
-void *l1_data_A_sram_alloc(size_t size)
-{
- unsigned long flags;
- void *addr = NULL;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-#if L1_DATA_A_LENGTH != 0
- addr = _sram_alloc(size, &free_l1_data_A_sram_head,
- &used_l1_data_A_sram_head);
-#endif
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
- pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
- (long unsigned int)addr, size);
-
- return addr;
-}
-EXPORT_SYMBOL(l1_data_A_sram_alloc);
-
-int l1_data_A_sram_free(const void *addr)
-{
- unsigned long flags;
- int ret;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_data_sram_lock, flags);
-
-#if L1_DATA_A_LENGTH != 0
- ret = _sram_free(addr, &free_l1_data_A_sram_head,
- &used_l1_data_A_sram_head);
-#else
- ret = -1;
-#endif
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(l1_data_A_sram_free);
-
-void *l1_data_B_sram_alloc(size_t size)
-{
-#if L1_DATA_B_LENGTH != 0
- unsigned long flags;
- void *addr;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_data_sram_lock, flags);
-
- addr = _sram_alloc(size, &free_l1_data_B_sram_head,
- &used_l1_data_B_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
- pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
- (long unsigned int)addr, size);
-
- return addr;
-#else
- return NULL;
-#endif
-}
-EXPORT_SYMBOL(l1_data_B_sram_alloc);
-
-int l1_data_B_sram_free(const void *addr)
-{
-#if L1_DATA_B_LENGTH != 0
- unsigned long flags;
- int ret;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_data_sram_lock, flags);
-
- ret = _sram_free(addr, &free_l1_data_B_sram_head,
- &used_l1_data_B_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_data_sram_lock, flags);
-
- return ret;
-#else
- return -1;
-#endif
-}
-EXPORT_SYMBOL(l1_data_B_sram_free);
-
-void *l1_data_sram_alloc(size_t size)
-{
- void *addr = l1_data_A_sram_alloc(size);
-
- if (!addr)
- addr = l1_data_B_sram_alloc(size);
-
- return addr;
-}
-EXPORT_SYMBOL(l1_data_sram_alloc);
-
-void *l1_data_sram_zalloc(size_t size)
-{
- void *addr = l1_data_sram_alloc(size);
-
- if (addr)
- memset(addr, 0x00, size);
-
- return addr;
-}
-EXPORT_SYMBOL(l1_data_sram_zalloc);
-
-int l1_data_sram_free(const void *addr)
-{
- int ret;
- ret = l1_data_A_sram_free(addr);
- if (ret == -1)
- ret = l1_data_B_sram_free(addr);
- return ret;
-}
-EXPORT_SYMBOL(l1_data_sram_free);
-
-void *l1_inst_sram_alloc(size_t size)
-{
-#if L1_CODE_LENGTH != 0
- unsigned long flags;
- void *addr;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_inst_sram_lock, flags);
-
- addr = _sram_alloc(size, &free_l1_inst_sram_head,
- &used_l1_inst_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
-
- pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
- (long unsigned int)addr, size);
-
- return addr;
-#else
- return NULL;
-#endif
-}
-EXPORT_SYMBOL(l1_inst_sram_alloc);
-
-int l1_inst_sram_free(const void *addr)
-{
-#if L1_CODE_LENGTH != 0
- unsigned long flags;
- int ret;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1_inst_sram_lock, flags);
-
- ret = _sram_free(addr, &free_l1_inst_sram_head,
- &used_l1_inst_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
-
- return ret;
-#else
- return -1;
-#endif
-}
-EXPORT_SYMBOL(l1_inst_sram_free);
-
-/* L1 Scratchpad memory allocate function */
-void *l1sram_alloc(size_t size)
-{
- unsigned long flags;
- void *addr;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1sram_lock, flags);
-
- addr = _sram_alloc(size, &free_l1_ssram_head,
- &used_l1_ssram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1sram_lock, flags);
-
- return addr;
-}
-
-/* L1 Scratchpad memory allocate function */
-void *l1sram_alloc_max(size_t *psize)
-{
- unsigned long flags;
- void *addr;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1sram_lock, flags);
-
- addr = _sram_alloc_max(&free_l1_ssram_head,
- &used_l1_ssram_head, psize);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1sram_lock, flags);
-
- return addr;
-}
-
-/* L1 Scratchpad memory free function */
-int l1sram_free(const void *addr)
-{
- unsigned long flags;
- int ret;
-
- /* add mutex operation */
- spin_lock_irqsave(&l1sram_lock, flags);
-
- ret = _sram_free(addr, &free_l1_ssram_head,
- &used_l1_ssram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l1sram_lock, flags);
-
- return ret;
-}
-
-void *l2_sram_alloc(size_t size)
-{
-#if L2_LENGTH != 0
- unsigned long flags;
- void *addr;
-
- /* add mutex operation */
- spin_lock_irqsave(&l2_sram_lock, flags);
-
- addr = _sram_alloc(size, &free_l2_sram_head,
- &used_l2_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l2_sram_lock, flags);
-
- pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
- (long unsigned int)addr, size);
-
- return addr;
-#else
- return NULL;
-#endif
-}
-EXPORT_SYMBOL(l2_sram_alloc);
-
-void *l2_sram_zalloc(size_t size)
-{
- void *addr = l2_sram_alloc(size);
-
- if (addr)
- memset(addr, 0x00, size);
-
- return addr;
-}
-EXPORT_SYMBOL(l2_sram_zalloc);
-
-int l2_sram_free(const void *addr)
-{
-#if L2_LENGTH != 0
- unsigned long flags;
- int ret;
-
- /* add mutex operation */
- spin_lock_irqsave(&l2_sram_lock, flags);
-
- ret = _sram_free(addr, &free_l2_sram_head,
- &used_l2_sram_head);
-
- /* add mutex operation */
- spin_unlock_irqrestore(&l2_sram_lock, flags);
-
- return ret;
-#else
- return -1;
-#endif
-}
-EXPORT_SYMBOL(l2_sram_free);
-
-int sram_free_with_lsl(const void *addr)
-{
- struct sram_list_struct *lsl, **tmp;
- struct mm_struct *mm = current->mm;
-
- for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
- if ((*tmp)->addr == addr)
- goto found;
- return -1;
-found:
- lsl = *tmp;
- sram_free(addr);
- *tmp = lsl->next;
- kfree(lsl);
-
- return 0;
-}
-EXPORT_SYMBOL(sram_free_with_lsl);
-
-void *sram_alloc_with_lsl(size_t size, unsigned long flags)
-{
- void *addr = NULL;
- struct sram_list_struct *lsl = NULL;
- struct mm_struct *mm = current->mm;
-
- lsl = kzalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
- if (!lsl)
- return NULL;
-
- if (flags & L1_INST_SRAM)
- addr = l1_inst_sram_alloc(size);
-
- if (addr == NULL && (flags & L1_DATA_A_SRAM))
- addr = l1_data_A_sram_alloc(size);
-
- if (addr == NULL && (flags & L1_DATA_B_SRAM))
- addr = l1_data_B_sram_alloc(size);
-
- if (addr == NULL && (flags & L2_SRAM))
- addr = l2_sram_alloc(size);
-
- if (addr == NULL) {
- kfree(lsl);
- return NULL;
- }
- lsl->addr = addr;
- lsl->length = size;
- lsl->next = mm->context.sram_list;
- mm->context.sram_list = lsl;
- return addr;
-}
-EXPORT_SYMBOL(sram_alloc_with_lsl);
-
-#ifdef CONFIG_PROC_FS
-/* Once we get a real allocator, we'll throw all of this away.
- * Until then, we need some sort of visibility into the L1 alloc.
- */
-/* Need to keep line of output the same. Currently, that is 44 bytes
- * (including newline).
- */
-static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
- struct sram_piece *pfree_head,
- struct sram_piece *pused_head)
-{
- struct sram_piece *pslot;
-
- if (!pfree_head || !pused_head)
- return -1;
-
- *len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc);
-
- /* search the relevant memory slot */
- pslot = pused_head->next;
-
- while (pslot != NULL) {
- *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
- pslot->paddr, pslot->paddr + pslot->size,
- pslot->size, pslot->pid, "ALLOCATED");
-
- pslot = pslot->next;
- }
-
- pslot = pfree_head->next;
-
- while (pslot != NULL) {
- *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
- pslot->paddr, pslot->paddr + pslot->size,
- pslot->size, pslot->pid, "FREE");
-
- pslot = pslot->next;
- }
-
- return 0;
-}
-static int sram_proc_read(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
-{
- int len = 0;
-
- if (_sram_proc_read(buf, &len, count, "Scratchpad",
- &free_l1_ssram_head, &used_l1_ssram_head))
- goto not_done;
-#if L1_DATA_A_LENGTH != 0
- if (_sram_proc_read(buf, &len, count, "L1 Data A",
- &free_l1_data_A_sram_head,
- &used_l1_data_A_sram_head))
- goto not_done;
-#endif
-#if L1_DATA_B_LENGTH != 0
- if (_sram_proc_read(buf, &len, count, "L1 Data B",
- &free_l1_data_B_sram_head,
- &used_l1_data_B_sram_head))
- goto not_done;
-#endif
-#if L1_CODE_LENGTH != 0
- if (_sram_proc_read(buf, &len, count, "L1 Instruction",
- &free_l1_inst_sram_head, &used_l1_inst_sram_head))
- goto not_done;
-#endif
-#if L2_LENGTH != 0
- if (_sram_proc_read(buf, &len, count, "L2",
- &free_l2_sram_head, &used_l2_sram_head))
- goto not_done;
-#endif
-
- *eof = 1;
- not_done:
- return len;
-}
-
-static int __init sram_proc_init(void)
-{
- struct proc_dir_entry *ptr;
- ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
- if (!ptr) {
- printk(KERN_WARNING "unable to create /proc/sram\n");
- return -1;
- }
- ptr->owner = THIS_MODULE;
- ptr->read_proc = sram_proc_read;
- return 0;
-}
-late_initcall(sram_proc_init);
-#endif
--- /dev/null
+/*
+ * Description: Instruction SRAM accessor functions for the Blackfin
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+
+#include <asm/blackfin.h>
+
+/*
+ * IMPORTANT WARNING ABOUT THESE FUNCTIONS
+ *
+ * The emulator will not function correctly if a write command is left in
+ * ITEST_COMMAND or DTEST_COMMAND AND access to cache memory is needed by
+ * the emulator. To avoid such problems, ensure that both ITEST_COMMAND
+ * and DTEST_COMMAND are zero when exiting these functions.
+ */
+
+
+/*
+ * On the Blackfin, L1 instruction sram (which operates at core speeds) can not
+ * be accessed by a normal core load, so we need to go through a few hoops to
+ * read/write it.
+ * To try to make it easier - we export a memcpy interface, where either src or
+ * dest can be in this special L1 memory area.
+ * The low level read/write functions should not be exposed to the rest of the
+ * kernel, since they operate on 64-bit data, and need specific address alignment
+ */
+
+static DEFINE_SPINLOCK(dtest_lock);
+
+/* Takes a void pointer */
+#define IADDR2DTEST(x) \
+ ({ unsigned long __addr = (unsigned long)(x); \
+ (__addr & 0x47F8) | /* address bits 14 & 10:3 */ \
+ (__addr & 0x0800) << 15 | /* address bit 11 */ \
+ (__addr & 0x3000) << 4 | /* address bits 13:12 */ \
+ (__addr & 0x8000) << 8 | /* address bit 15 */ \
+ (0x1000004); /* isram access */ \
+ })
+
+/* Takes a pointer, and returns the offset (in bits) which things should be shifted */
+#define ADDR2OFFSET(x) ((((unsigned long)(x)) & 0x7) * 8)
+
+/* Takes a pointer, determines if it is the last byte in the isram 64-bit data type */
+#define ADDR2LAST(x) ((((unsigned long)x) & 0x7) == 0x7)
+
+static void isram_write(const void *addr, uint64_t data)
+{
+ uint32_t cmd;
+ unsigned long flags;
+
+ if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return;
+
+ cmd = IADDR2DTEST(addr) | 1; /* write */
+
+ /*
+ * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+ * While in exception context - atomicity is guaranteed or double fault
+ */
+ spin_lock_irqsave(&dtest_lock, flags);
+
+ bfin_write_DTEST_DATA0(data & 0xFFFFFFFF);
+ bfin_write_DTEST_DATA1(data >> 32);
+
+ /* use the builtin, since interrupts are already turned off */
+ __builtin_bfin_csync();
+ bfin_write_DTEST_COMMAND(cmd);
+ __builtin_bfin_csync();
+
+ bfin_write_DTEST_COMMAND(0);
+ __builtin_bfin_csync();
+
+ spin_unlock_irqrestore(&dtest_lock, flags);
+}
+
+static uint64_t isram_read(const void *addr)
+{
+ uint32_t cmd;
+ unsigned long flags;
+ uint64_t ret;
+
+ if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return 0;
+
+ cmd = IADDR2DTEST(addr) | 0; /* read */
+
+ /*
+ * Reads of DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
+ * While in exception context - atomicity is guaranteed or double fault
+ */
+ spin_lock_irqsave(&dtest_lock, flags);
+ /* use the builtin, since interrupts are already turned off */
+ __builtin_bfin_csync();
+ bfin_write_DTEST_COMMAND(cmd);
+ __builtin_bfin_csync();
+ ret = bfin_read_DTEST_DATA0() | ((uint64_t)bfin_read_DTEST_DATA1() << 32);
+
+ bfin_write_DTEST_COMMAND(0);
+ __builtin_bfin_csync();
+ spin_unlock_irqrestore(&dtest_lock, flags);
+
+ return ret;
+}
+
+static bool isram_check_addr(const void *addr, size_t n)
+{
+ if ((addr >= (void *)L1_CODE_START) &&
+ (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
+ if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+ show_stack(NULL, NULL);
+ printk(KERN_ERR "isram_memcpy: copy involving %p length "
+ "(%zu) too long\n", addr, n);
+ }
+ return true;
+ }
+ return false;
+}
+
+/*
+ * The isram_memcpy() function copies n bytes from memory area src to memory area dest.
+ * The isram_memcpy() function returns a pointer to dest.
+ * Either dest or src can be in L1 instruction sram.
+ */
+void *isram_memcpy(void *dest, const void *src, size_t n)
+{
+ uint64_t data_in = 0, data_out = 0;
+ size_t count;
+ bool dest_in_l1, src_in_l1, need_data, put_data;
+ unsigned char byte, *src_byte, *dest_byte;
+
+ src_byte = (unsigned char *)src;
+ dest_byte = (unsigned char *)dest;
+
+ dest_in_l1 = isram_check_addr(dest, n);
+ src_in_l1 = isram_check_addr(src, n);
+
+ need_data = true;
+ put_data = true;
+ for (count = 0; count < n; count++) {
+ if (src_in_l1) {
+ if (need_data) {
+ data_in = isram_read(src + count);
+ need_data = false;
+ }
+
+ if (ADDR2LAST(src + count))
+ need_data = true;
+
+ byte = (unsigned char)((data_in >> ADDR2OFFSET(src + count)) & 0xff);
+
+ } else {
+ /* src is in L2 or L3 - so just dereference*/
+ byte = src_byte[count];
+ }
+
+ if (dest_in_l1) {
+ if (put_data) {
+ data_out = isram_read(dest + count);
+ put_data = false;
+ }
+
+ data_out &= ~((uint64_t)0xff << ADDR2OFFSET(dest + count));
+ data_out |= ((uint64_t)byte << ADDR2OFFSET(dest + count));
+
+ if (ADDR2LAST(dest + count)) {
+ put_data = true;
+ isram_write(dest + count, data_out);
+ }
+ } else {
+ /* dest in L2 or L3 - so just dereference */
+ dest_byte[count] = byte;
+ }
+ }
+
+ /* make sure we dump the last byte if necessary */
+ if (dest_in_l1 && !put_data)
+ isram_write(dest + count, data_out);
+
+ return dest;
+}
+EXPORT_SYMBOL(isram_memcpy);
+
--- /dev/null
+/*
+ * File: arch/blackfin/mm/sram-alloc.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SRAM allocator for Blackfin L1 and L2 memory
+ *
+ * Modified:
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <asm/blackfin.h>
+#include "blackfin_sram.h"
+
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
+
+/* the data structure for L1 scratchpad and DATA SRAM */
+struct sram_piece {
+ void *paddr;
+ int size;
+ pid_t pid;
+ struct sram_piece *next;
+};
+
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
+
+#if L1_DATA_A_LENGTH != 0
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
+#endif
+
+#if L1_DATA_B_LENGTH != 0
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
+#endif
+
+#if L1_CODE_LENGTH != 0
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#if L2_LENGTH != 0
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
+#endif
+
+static struct kmem_cache *sram_piece_cache;
+
+/* L1 Scratchpad SRAM initialization function */
+static void __init l1sram_init(void)
+{
+ free_l1_ssram_head.next =
+ kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+ if (!free_l1_ssram_head.next) {
+ printk(KERN_INFO "Failed to initialize Scratchpad data SRAM\n");
+ return;
+ }
+
+ free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+ free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+ free_l1_ssram_head.next->pid = 0;
+ free_l1_ssram_head.next->next = NULL;
+
+ used_l1_ssram_head.next = NULL;
+
+ /* mutex initialize */
+ spin_lock_init(&l1sram_lock);
+
+ printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+ L1_SCRATCH_LENGTH >> 10);
+}
+
+static void __init l1_data_sram_init(void)
+{
+#if L1_DATA_A_LENGTH != 0
+ free_l1_data_A_sram_head.next =
+ kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+ if (!free_l1_data_A_sram_head.next) {
+ printk(KERN_INFO "Failed to initialize L1 Data A SRAM\n");
+ return;
+ }
+
+ free_l1_data_A_sram_head.next->paddr =
+ (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+ free_l1_data_A_sram_head.next->size =
+ L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+ free_l1_data_A_sram_head.next->pid = 0;
+ free_l1_data_A_sram_head.next->next = NULL;
+
+ used_l1_data_A_sram_head.next = NULL;
+
+ printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+ L1_DATA_A_LENGTH >> 10,
+ free_l1_data_A_sram_head.next->size >> 10);
+#endif
+#if L1_DATA_B_LENGTH != 0
+ free_l1_data_B_sram_head.next =
+ kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+ if (!free_l1_data_B_sram_head.next) {
+ printk(KERN_INFO "Failed to initialize L1 Data B SRAM\n");
+ return;
+ }
+
+ free_l1_data_B_sram_head.next->paddr =
+ (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+ free_l1_data_B_sram_head.next->size =
+ L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+ free_l1_data_B_sram_head.next->pid = 0;
+ free_l1_data_B_sram_head.next->next = NULL;
+
+ used_l1_data_B_sram_head.next = NULL;
+
+ printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+ L1_DATA_B_LENGTH >> 10,
+ free_l1_data_B_sram_head.next->size >> 10);
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_data_sram_lock);
+}
+
+static void __init l1_inst_sram_init(void)
+{
+#if L1_CODE_LENGTH != 0
+ free_l1_inst_sram_head.next =
+ kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+ if (!free_l1_inst_sram_head.next) {
+ printk(KERN_INFO "Failed to initialize L1 Instruction SRAM\n");
+ return;
+ }
+
+ free_l1_inst_sram_head.next->paddr =
+ (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+ free_l1_inst_sram_head.next->size =
+ L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+ free_l1_inst_sram_head.next->pid = 0;
+ free_l1_inst_sram_head.next->next = NULL;
+
+ used_l1_inst_sram_head.next = NULL;
+
+ printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+ L1_CODE_LENGTH >> 10,
+ free_l1_inst_sram_head.next->size >> 10);
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_inst_sram_lock);
+}
+
+static void __init l2_sram_init(void)
+{
+#if L2_LENGTH != 0
+ free_l2_sram_head.next =
+ kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+ if (!free_l2_sram_head.next) {
+ printk(KERN_INFO "Failed to initialize L2 SRAM\n");
+ return;
+ }
+
+ free_l2_sram_head.next->paddr = (void *)L2_START +
+ (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+ free_l2_sram_head.next->size = L2_LENGTH -
+ (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+ free_l2_sram_head.next->pid = 0;
+ free_l2_sram_head.next->next = NULL;
+
+ used_l2_sram_head.next = NULL;
+
+ printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+ L2_LENGTH >> 10,
+ free_l2_sram_head.next->size >> 10);
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+ sram_piece_cache = kmem_cache_create("sram_piece_cache",
+ sizeof(struct sram_piece),
+ 0, SLAB_PANIC, NULL);
+
+ l1sram_init();
+ l1_data_sram_init();
+ l1_inst_sram_init();
+ l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+ struct sram_piece *pused_head)
+{
+ struct sram_piece *pslot, *plast, *pavail;
+
+ if (size <= 0 || !pfree_head || !pused_head)
+ return NULL;
+
+ /* Align the size */
+ size = (size + 3) & ~3;
+
+ pslot = pfree_head->next;
+ plast = pfree_head;
+
+ /* search an available piece slot */
+ while (pslot != NULL && size > pslot->size) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pslot)
+ return NULL;
+
+ if (pslot->size == size) {
+ plast->next = pslot->next;
+ pavail = pslot;
+ } else {
+ pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+ if (!pavail)
+ return NULL;
+
+ pavail->paddr = pslot->paddr;
+ pavail->size = size;
+ pslot->paddr += size;
+ pslot->size -= size;
+ }
+
+ pavail->pid = current->pid;
+
+ pslot = pused_head->next;
+ plast = pused_head;
+
+ /* insert new piece into used piece list !!! */
+ while (pslot != NULL && pavail->paddr < pslot->paddr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ pavail->next = pslot;
+ plast->next = pavail;
+
+ return pavail->paddr;
+}
+
+/* Allocate the largest available block. */
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+ struct sram_piece *pused_head,
+ unsigned long *psize)
+{
+ struct sram_piece *pslot, *pmax;
+
+ if (!pfree_head || !pused_head)
+ return NULL;
+
+ pmax = pslot = pfree_head->next;
+
+ /* search an available piece slot */
+ while (pslot != NULL) {
+ if (pslot->size > pmax->size)
+ pmax = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pmax)
+ return NULL;
+
+ *psize = pmax->size;
+
+ return _sram_alloc(*psize, pfree_head, pused_head);
+}
+
+/* SRAM free function */
+static int _sram_free(const void *addr,
+ struct sram_piece *pfree_head,
+ struct sram_piece *pused_head)
+{
+ struct sram_piece *pslot, *plast, *pavail;
+
+ if (!pfree_head || !pused_head)
+ return -1;
+
+ /* search the relevant memory slot */
+ pslot = pused_head->next;
+ plast = pused_head;
+
+ /* search an available piece slot */
+ while (pslot != NULL && pslot->paddr != addr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pslot)
+ return -1;
+
+ plast->next = pslot->next;
+ pavail = pslot;
+ pavail->pid = 0;
+
+ /* insert free pieces back to the free list */
+ pslot = pfree_head->next;
+ plast = pfree_head;
+
+ while (pslot != NULL && addr > pslot->paddr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+ plast->size += pavail->size;
+ kmem_cache_free(sram_piece_cache, pavail);
+ } else {
+ pavail->next = plast->next;
+ plast->next = pavail;
+ plast = pavail;
+ }
+
+ if (pslot && plast->paddr + plast->size == pslot->paddr) {
+ plast->size += pslot->size;
+ plast->next = pslot->next;
+ kmem_cache_free(sram_piece_cache, pslot);
+ }
+
+ return 0;
+}
+
+int sram_free(const void *addr)
+{
+
+#if L1_CODE_LENGTH != 0
+ if (addr >= (void *)L1_CODE_START
+ && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return l1_inst_sram_free(addr);
+ else
+#endif
+#if L1_DATA_A_LENGTH != 0
+ if (addr >= (void *)L1_DATA_A_START
+ && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
+ return l1_data_A_sram_free(addr);
+ else
+#endif
+#if L1_DATA_B_LENGTH != 0
+ if (addr >= (void *)L1_DATA_B_START
+ && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
+ return l1_data_B_sram_free(addr);
+ else
+#endif
+#if L2_LENGTH != 0
+ if (addr >= (void *)L2_START
+ && addr < (void *)(L2_START + L2_LENGTH))
+ return l2_sram_free(addr);
+ else
+#endif
+ return -1;
+}
+EXPORT_SYMBOL(sram_free);
+
+void *l1_data_A_sram_alloc(size_t size)
+{
+ unsigned long flags;
+ void *addr = NULL;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+ &used_l1_data_A_sram_head);
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_A_sram_alloc);
+
+int l1_data_A_sram_free(const void *addr)
+{
+ unsigned long flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ ret = _sram_free(addr, &free_l1_data_A_sram_head,
+ &used_l1_data_A_sram_head);
+#else
+ ret = -1;
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_A_sram_free);
+
+void *l1_data_B_sram_alloc(size_t size)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned long flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+ &used_l1_data_B_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_alloc);
+
+int l1_data_B_sram_free(const void *addr)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned long flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ ret = _sram_free(addr, &free_l1_data_B_sram_head,
+ &used_l1_data_B_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_free);
+
+void *l1_data_sram_alloc(size_t size)
+{
+ void *addr = l1_data_A_sram_alloc(size);
+
+ if (!addr)
+ addr = l1_data_B_sram_alloc(size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_alloc);
+
+void *l1_data_sram_zalloc(size_t size)
+{
+ void *addr = l1_data_sram_alloc(size);
+
+ if (addr)
+ memset(addr, 0x00, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_zalloc);
+
+int l1_data_sram_free(const void *addr)
+{
+ int ret;
+ ret = l1_data_A_sram_free(addr);
+ if (ret == -1)
+ ret = l1_data_B_sram_free(addr);
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_sram_free);
+
+void *l1_inst_sram_alloc(size_t size)
+{
+#if L1_CODE_LENGTH != 0
+ unsigned long flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ addr = _sram_alloc(size, &free_l1_inst_sram_head,
+ &used_l1_inst_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_alloc);
+
+int l1_inst_sram_free(const void *addr)
+{
+#if L1_CODE_LENGTH != 0
+ unsigned long flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ ret = _sram_free(addr, &free_l1_inst_sram_head,
+ &used_l1_inst_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_free);
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc(size_t size)
+{
+ unsigned long flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _sram_alloc(size, &free_l1_ssram_head,
+ &used_l1_ssram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc_max(size_t *psize)
+{
+ unsigned long flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _sram_alloc_max(&free_l1_ssram_head,
+ &used_l1_ssram_head, psize);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory free function */
+int l1sram_free(const void *addr)
+{
+ unsigned long flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ ret = _sram_free(addr, &free_l1_ssram_head,
+ &used_l1_ssram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return ret;
+}
+
+void *l2_sram_alloc(size_t size)
+{
+#if L2_LENGTH != 0
+ unsigned long flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l2_sram_lock, flags);
+
+ addr = _sram_alloc(size, &free_l2_sram_head,
+ &used_l2_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+ pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+ void *addr = l2_sram_alloc(size);
+
+ if (addr)
+ memset(addr, 0x00, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#if L2_LENGTH != 0
+ unsigned long flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l2_sram_lock, flags);
+
+ ret = _sram_free(addr, &free_l2_sram_head,
+ &used_l2_sram_head);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
+int sram_free_with_lsl(const void *addr)
+{
+ struct sram_list_struct *lsl, **tmp;
+ struct mm_struct *mm = current->mm;
+
+ for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+ if ((*tmp)->addr == addr)
+ goto found;
+ return -1;
+found:
+ lsl = *tmp;
+ sram_free(addr);
+ *tmp = lsl->next;
+ kfree(lsl);
+
+ return 0;
+}
+EXPORT_SYMBOL(sram_free_with_lsl);
+
+void *sram_alloc_with_lsl(size_t size, unsigned long flags)
+{
+ void *addr = NULL;
+ struct sram_list_struct *lsl = NULL;
+ struct mm_struct *mm = current->mm;
+
+ lsl = kzalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
+ if (!lsl)
+ return NULL;
+
+ if (flags & L1_INST_SRAM)
+ addr = l1_inst_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_A_SRAM))
+ addr = l1_data_A_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_B_SRAM))
+ addr = l1_data_B_sram_alloc(size);
+
+ if (addr == NULL && (flags & L2_SRAM))
+ addr = l2_sram_alloc(size);
+
+ if (addr == NULL) {
+ kfree(lsl);
+ return NULL;
+ }
+ lsl->addr = addr;
+ lsl->length = size;
+ lsl->next = mm->context.sram_list;
+ mm->context.sram_list = lsl;
+ return addr;
+}
+EXPORT_SYMBOL(sram_alloc_with_lsl);
+
+#ifdef CONFIG_PROC_FS
+/* Once we get a real allocator, we'll throw all of this away.
+ * Until then, we need some sort of visibility into the L1 alloc.
+ */
+/* Need to keep line of output the same. Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+ struct sram_piece *pfree_head,
+ struct sram_piece *pused_head)
+{
+ struct sram_piece *pslot;
+
+ if (!pfree_head || !pused_head)
+ return -1;
+
+ *len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc);
+
+ /* search the relevant memory slot */
+ pslot = pused_head->next;
+
+ while (pslot != NULL) {
+ *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+ pslot->paddr, pslot->paddr + pslot->size,
+ pslot->size, pslot->pid, "ALLOCATED");
+
+ pslot = pslot->next;
+ }
+
+ pslot = pfree_head->next;
+
+ while (pslot != NULL) {
+ *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+ pslot->paddr, pslot->paddr + pslot->size,
+ pslot->size, pslot->pid, "FREE");
+
+ pslot = pslot->next;
+ }
+
+ return 0;
+}
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
+ int *eof, void *data)
+{
+ int len = 0;
+
+ if (_sram_proc_read(buf, &len, count, "Scratchpad",
+ &free_l1_ssram_head, &used_l1_ssram_head))
+ goto not_done;
+#if L1_DATA_A_LENGTH != 0
+ if (_sram_proc_read(buf, &len, count, "L1 Data A",
+ &free_l1_data_A_sram_head,
+ &used_l1_data_A_sram_head))
+ goto not_done;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ if (_sram_proc_read(buf, &len, count, "L1 Data B",
+ &free_l1_data_B_sram_head,
+ &used_l1_data_B_sram_head))
+ goto not_done;
+#endif
+#if L1_CODE_LENGTH != 0
+ if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+ &free_l1_inst_sram_head, &used_l1_inst_sram_head))
+ goto not_done;
+#endif
+#if L2_LENGTH != 0
+ if (_sram_proc_read(buf, &len, count, "L2",
+ &free_l2_sram_head, &used_l2_sram_head))
+ goto not_done;
+#endif
+
+ *eof = 1;
+ not_done:
+ return len;
+}
+
+static int __init sram_proc_init(void)
+{
+ struct proc_dir_entry *ptr;
+ ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
+ if (!ptr) {
+ printk(KERN_WARNING "unable to create /proc/sram\n");
+ return -1;
+ }
+ ptr->owner = THIS_MODULE;
+ ptr->read_proc = sram_proc_read;
+ return 0;
+}
+late_initcall(sram_proc_init);
+#endif
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff