ASoC: Add support for WM8962 GPIO outputs
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Mon, 20 Sep 2010 16:34:58 +0000 (17:34 +0100)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Sat, 2 Oct 2010 21:23:04 +0000 (14:23 -0700)
The WM8962 features five GPIOs, add support for controlling their output
state via gpiolib.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
include/sound/wm8962.h
sound/soc/codecs/wm8962.c
sound/soc/codecs/wm8962.h

index 9722aac5a138c217361fae81286ac268ee724b3d..2b5306c503fbc66e97c22dd07bb089b27c9aad71 100644 (file)
@@ -15,6 +15,7 @@
 #define WM8962_GPIO_SET 0x10000
 
 struct wm8962_pdata {
+       int gpio_base;
        u32 gpio_init[WM8962_MAX_GPIO];
 
        /* Setup for microphone detection, raw value to be written to
index 38cbf85688f6b78b580e13951353408d774374be..eb66c66047b123d012402af16bc8e2996f03708b 100644 (file)
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/gcd.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
@@ -70,6 +71,10 @@ struct wm8962_priv {
        struct work_struct beep_work;
        int beep_rate;
 #endif
+
+#ifdef CONFIG_GPIOLIB
+       struct gpio_chip gpio_chip;
+#endif
 };
 
 /* We can't use the same notifier block for more than one supply and
@@ -1646,6 +1651,118 @@ static void wm8962_free_beep(struct snd_soc_codec *codec)
 }
 #endif
 
+#ifdef CONFIG_GPIOLIB
+static inline struct wm8962_priv *gpio_to_wm8962(struct gpio_chip *chip)
+{
+       return container_of(chip, struct wm8962_priv, gpio_chip);
+}
+
+static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+       struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
+       struct snd_soc_codec *codec = wm8962->codec;
+       int mask = 0;
+       int val;
+
+       /* The WM8962 GPIOs aren't linearly numbered.  For simplicity
+        * we export linear numbers and error out if the unsupported
+        * ones are requsted.
+        */
+       switch (offset + 1) {
+       case 2:
+               mask = WM8962_CLKOUT2_SEL_MASK;
+               val = 1 << WM8962_CLKOUT2_SEL_SHIFT;
+               break;
+       case 3:
+               mask = WM8962_CLKOUT3_SEL_MASK;
+               val = 1 << WM8962_CLKOUT3_SEL_SHIFT;
+               break;
+       case 5:
+       case 6:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       /* Some of the GPIOs are behind MFP configuration */
+       if (mask)
+               snd_soc_update_bits(codec, WM8962_ANALOGUE_CLOCKING1,
+                                   mask, val);
+
+       return 0;
+}
+
+static void wm8962_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+       struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
+       struct snd_soc_codec *codec = wm8962->codec;
+
+       snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset,
+                           WM8962_GP2_LVL, value << WM8962_GP2_LVL_SHIFT);
+}
+
+static int wm8962_gpio_direction_out(struct gpio_chip *chip,
+                                    unsigned offset, int value)
+{
+       struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
+       struct snd_soc_codec *codec = wm8962->codec;
+       int val;
+
+       /* Force function 1 (logic output) */
+       val = (1 << WM8962_GP2_FN_SHIFT) | (value << WM8962_GP2_LVL_SHIFT);
+
+       return snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset,
+                                  WM8962_GP2_FN_MASK | WM8962_GP2_LVL, val);
+}
+
+static struct gpio_chip wm8962_template_chip = {
+       .label                  = "wm8962",
+       .owner                  = THIS_MODULE,
+       .request                = wm8962_gpio_request,
+       .direction_output       = wm8962_gpio_direction_out,
+       .set                    = wm8962_gpio_set,
+       .can_sleep              = 1,
+};
+
+static void wm8962_init_gpio(struct snd_soc_codec *codec)
+{
+       struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+       struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+       int ret;
+
+       wm8962->gpio_chip = wm8962_template_chip;
+       wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO;
+       wm8962->gpio_chip.dev = codec->dev;
+
+       if (pdata && pdata->gpio_base)
+               wm8962->gpio_chip.base = pdata->gpio_base;
+       else
+               wm8962->gpio_chip.base = -1;
+
+       ret = gpiochip_add(&wm8962->gpio_chip);
+       if (ret != 0)
+               dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret);
+}
+
+static void wm8962_free_gpio(struct snd_soc_codec *codec)
+{
+       struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+       int ret;
+
+       ret = gpiochip_remove(&wm8962->gpio_chip);
+       if (ret != 0)
+               dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret);
+}
+#else
+static void wm8962_init_gpio(struct snd_soc_codec *codec)
+{
+}
+
+static void wm8962_free_gpio(struct snd_soc_codec *codec)
+{
+}
+#endif
+
 static int wm8962_probe(struct snd_soc_codec *codec)
 {
        int ret;
@@ -1778,6 +1895,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
        wm8962_add_widgets(codec);
 
        wm8962_init_beep(codec);
+       wm8962_init_gpio(codec);
 
        if (i2c->irq) {
                if (pdata && pdata->irq_active_low) {
@@ -1828,6 +1946,7 @@ static int wm8962_remove(struct snd_soc_codec *codec)
        if (i2c->irq)
                free_irq(i2c->irq, codec);
 
+       wm8962_free_gpio(codec);
        wm8962_free_beep(codec);
        for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
                regulator_unregister_notifier(wm8962->supplies[i].consumer,
index 6145399acb168cf66d838b6532c53d07f8eb3c39..fce11998b2783d4377992e3f417adca4e0a32ecc 100644 (file)
 #define WM8962_EQ39                             0x175
 #define WM8962_EQ40                             0x176
 #define WM8962_EQ41                             0x177
+#define WM8962_GPIO_BASE                       0x200
 #define WM8962_GPIO_2                           0x201
 #define WM8962_GPIO_3                           0x202
 #define WM8962_GPIO_5                           0x204