can: flexcan: fix flexcan_chip_start() on imx6

commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream.

In the flexcan_chip_start() function first the flexcan core is going through
the soft reset sequence, then the RX FIFO is enabled.

With the hardware is put into FIFO mode, message buffers 1...7 are reserved by
the FIFO engine. The remaining message buffers are in reset default values.
This patch removes the bogus initialization of the message buffers, as it
causes an imprecise external abort on imx6.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
[mkl: adjusted context for stable]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index a8f33a525dd696a226093cc477654abfa127bbdb..f63169d6af26f84f0ded65a87dc0119491ee69f2 100644 (file)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -711,7 +711,6 @@ static int flexcan_chip_start(struct net_device *dev)
 {
        struct flexcan_priv *priv = netdev_priv(dev);
        struct flexcan_regs __iomem *regs = priv->base;
-       unsigned int i;
        int err;
        u32 reg_mcr, reg_ctrl;
 
@@ -783,17 +782,6 @@ static int flexcan_chip_start(struct net_device *dev)
        netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
        flexcan_write(reg_ctrl, &regs->ctrl);
 
-       for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) {
-               flexcan_write(0, &regs->cantxfg[i].can_ctrl);
-               flexcan_write(0, &regs->cantxfg[i].can_id);
-               flexcan_write(0, &regs->cantxfg[i].data[0]);
-               flexcan_write(0, &regs->cantxfg[i].data[1]);
-
-               /* put MB into rx queue */
-               flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
-                       &regs->cantxfg[i].can_ctrl);
-       }
-
        /* Abort any pending TX, mark Mailbox as INACTIVE */
        flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
                      &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);