rapidio/tsi721: fix bug in MSI interrupt handling
authorAlexandre Bounine <alexandre.bounine@idt.com>
Fri, 24 May 2013 22:55:17 +0000 (15:55 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 24 May 2013 23:22:51 +0000 (16:22 -0700)
Fix bug in MSI interrupt handling which causes loss of event
notifications.

Typical indication of lost MSI interrupts are stalled message and
doorbell transfers between RapidIO endpoints.  To avoid loss of MSI
interrupts all interrupts from the device must be disabled on entering
the interrupt handler routine and re-enabled when exiting it.
Re-enabling device interrupts will trigger new MSI message(s) if Tsi721
registered new events since entering interrupt handler routine.

This patch is applicable to kernel versions starting from v3.2.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rapidio/devices/tsi721.c

index 6faba406b6e9f705bb047232b796d8476e89e1db..a8b2c23a7ef4b7acbe4a771fbf72a2ddffded52f 100644 (file)
@@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
        u32 intval;
        u32 ch_inte;
 
+       /* For MSI mode disable all device-level interrupts */
+       if (priv->flags & TSI721_USING_MSI)
+               iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
        dev_int = ioread32(priv->regs + TSI721_DEV_INT);
        if (!dev_int)
                return IRQ_NONE;
@@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
                }
        }
 #endif
+
+       /* For MSI mode re-enable device-level interrupts */
+       if (priv->flags & TSI721_USING_MSI) {
+               dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+                       TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+               iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+       }
+
        return IRQ_HANDLED;
 }