ifeq ($(CONFIG_X86_32),y)
include ${srctree}/arch/x86/lib/Makefile_32
else
-include ${srctree}/arch/x86_64/lib/Makefile_64
+include ${srctree}/arch/x86/lib/Makefile_64
endif
--- /dev/null
+#
+# Makefile for x86_64-specific library files.
+#
+
+CFLAGS_csum-partial_64.o := -funroll-loops
+
+obj-y := io_64.o iomap_copy_64.o
+obj-$(CONFIG_SMP) += msr-on-cpu.o
+
+lib-y := csum-partial_64.o csum-copy_64.o csum-wrappers_64.o delay_64.o \
+ usercopy_64.o getuser_64.o putuser_64.o \
+ thunk_64.o clear_page_64.o copy_page_64.o bitstr_64.o bitops_64.o
+lib-y += memcpy_64.o memmove_64.o memset_64.o copy_user_64.o rwlock_64.o copy_user_nocache_64.o
--- /dev/null
+#include <linux/bitops.h>
+
+#undef find_first_zero_bit
+#undef find_next_zero_bit
+#undef find_first_bit
+#undef find_next_bit
+
+static inline long
+__find_first_zero_bit(const unsigned long * addr, unsigned long size)
+{
+ long d0, d1, d2;
+ long res;
+
+ /*
+ * We must test the size in words, not in bits, because
+ * otherwise incoming sizes in the range -63..-1 will not run
+ * any scasq instructions, and then the flags used by the je
+ * instruction will have whatever random value was in place
+ * before. Nobody should call us like that, but
+ * find_next_zero_bit() does when offset and size are at the
+ * same word and it fails to find a zero itself.
+ */
+ size += 63;
+ size >>= 6;
+ if (!size)
+ return 0;
+ asm volatile(
+ " repe; scasq\n"
+ " je 1f\n"
+ " xorq -8(%%rdi),%%rax\n"
+ " subq $8,%%rdi\n"
+ " bsfq %%rax,%%rdx\n"
+ "1: subq %[addr],%%rdi\n"
+ " shlq $3,%%rdi\n"
+ " addq %%rdi,%%rdx"
+ :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
+ :"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL),
+ [addr] "S" (addr) : "memory");
+ /*
+ * Any register would do for [addr] above, but GCC tends to
+ * prefer rbx over rsi, even though rsi is readily available
+ * and doesn't have to be saved.
+ */
+ return res;
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+long find_first_zero_bit(const unsigned long * addr, unsigned long size)
+{
+ return __find_first_zero_bit (addr, size);
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+long find_next_zero_bit (const unsigned long * addr, long size, long offset)
+{
+ const unsigned long * p = addr + (offset >> 6);
+ unsigned long set = 0;
+ unsigned long res, bit = offset&63;
+
+ if (bit) {
+ /*
+ * Look for zero in first word
+ */
+ asm("bsfq %1,%0\n\t"
+ "cmoveq %2,%0"
+ : "=r" (set)
+ : "r" (~(*p >> bit)), "r"(64L));
+ if (set < (64 - bit))
+ return set + offset;
+ set = 64 - bit;
+ p++;
+ }
+ /*
+ * No zero yet, search remaining full words for a zero
+ */
+ res = __find_first_zero_bit (p, size - 64 * (p - addr));
+
+ return (offset + set + res);
+}
+
+static inline long
+__find_first_bit(const unsigned long * addr, unsigned long size)
+{
+ long d0, d1;
+ long res;
+
+ /*
+ * We must test the size in words, not in bits, because
+ * otherwise incoming sizes in the range -63..-1 will not run
+ * any scasq instructions, and then the flags used by the jz
+ * instruction will have whatever random value was in place
+ * before. Nobody should call us like that, but
+ * find_next_bit() does when offset and size are at the same
+ * word and it fails to find a one itself.
+ */
+ size += 63;
+ size >>= 6;
+ if (!size)
+ return 0;
+ asm volatile(
+ " repe; scasq\n"
+ " jz 1f\n"
+ " subq $8,%%rdi\n"
+ " bsfq (%%rdi),%%rax\n"
+ "1: subq %[addr],%%rdi\n"
+ " shlq $3,%%rdi\n"
+ " addq %%rdi,%%rax"
+ :"=a" (res), "=&c" (d0), "=&D" (d1)
+ :"0" (0ULL), "1" (size), "2" (addr),
+ [addr] "r" (addr) : "memory");
+ return res;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+long find_first_bit(const unsigned long * addr, unsigned long size)
+{
+ return __find_first_bit(addr,size);
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+long find_next_bit(const unsigned long * addr, long size, long offset)
+{
+ const unsigned long * p = addr + (offset >> 6);
+ unsigned long set = 0, bit = offset & 63, res;
+
+ if (bit) {
+ /*
+ * Look for nonzero in the first 64 bits:
+ */
+ asm("bsfq %1,%0\n\t"
+ "cmoveq %2,%0\n\t"
+ : "=r" (set)
+ : "r" (*p >> bit), "r" (64L));
+ if (set < (64 - bit))
+ return set + offset;
+ set = 64 - bit;
+ p++;
+ }
+ /*
+ * No set bit yet, search remaining full words for a bit
+ */
+ res = __find_first_bit (p, size - 64 * (p - addr));
+ return (offset + set + res);
+}
+
+#include <linux/module.h>
+
+EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(find_first_bit);
+EXPORT_SYMBOL(find_first_zero_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
--- /dev/null
+#include <linux/module.h>
+#include <linux/bitops.h>
+
+/* Find string of zero bits in a bitmap */
+unsigned long
+find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
+{
+ unsigned long n, end, i;
+
+ again:
+ n = find_next_zero_bit(bitmap, nbits, start);
+ if (n == -1)
+ return -1;
+
+ /* could test bitsliced, but it's hardly worth it */
+ end = n+len;
+ if (end >= nbits)
+ return -1;
+ for (i = n+1; i < end; i++) {
+ if (test_bit(i, bitmap)) {
+ start = i+1;
+ goto again;
+ }
+ }
+ return n;
+}
+
+EXPORT_SYMBOL(find_next_zero_string);
--- /dev/null
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * Zero a page.
+ * rdi page
+ */
+ ALIGN
+clear_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ xorl %eax,%eax
+ rep stosq
+ ret
+ CFI_ENDPROC
+ENDPROC(clear_page)
+
+ENTRY(clear_page)
+ CFI_STARTPROC
+ xorl %eax,%eax
+ movl $4096/64,%ecx
+ .p2align 4
+.Lloop:
+ decl %ecx
+#define PUT(x) movq %rax,x*8(%rdi)
+ movq %rax,(%rdi)
+ PUT(1)
+ PUT(2)
+ PUT(3)
+ PUT(4)
+ PUT(5)
+ PUT(6)
+ PUT(7)
+ leaq 64(%rdi),%rdi
+ jnz .Lloop
+ nop
+ ret
+ CFI_ENDPROC
+.Lclear_page_end:
+ENDPROC(clear_page)
+
+ /* Some CPUs run faster using the string instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */
+2:
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad clear_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lclear_page_end - clear_page
+ .byte 2b - 1b
+ .previous
--- /dev/null
+/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+ ALIGN
+copy_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ rep movsq
+ ret
+ CFI_ENDPROC
+ENDPROC(copy_page_c)
+
+/* Don't use streaming store because it's better when the target
+ ends up in cache. */
+
+/* Could vary the prefetch distance based on SMP/UP */
+
+ENTRY(copy_page)
+ CFI_STARTPROC
+ subq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 3*8
+ movq %rbx,(%rsp)
+ CFI_REL_OFFSET rbx, 0
+ movq %r12,1*8(%rsp)
+ CFI_REL_OFFSET r12, 1*8
+ movq %r13,2*8(%rsp)
+ CFI_REL_OFFSET r13, 2*8
+
+ movl $(4096/64)-5,%ecx
+ .p2align 4
+.Loop64:
+ dec %rcx
+
+ movq (%rsi), %rax
+ movq 8 (%rsi), %rbx
+ movq 16 (%rsi), %rdx
+ movq 24 (%rsi), %r8
+ movq 32 (%rsi), %r9
+ movq 40 (%rsi), %r10
+ movq 48 (%rsi), %r11
+ movq 56 (%rsi), %r12
+
+ prefetcht0 5*64(%rsi)
+
+ movq %rax, (%rdi)
+ movq %rbx, 8 (%rdi)
+ movq %rdx, 16 (%rdi)
+ movq %r8, 24 (%rdi)
+ movq %r9, 32 (%rdi)
+ movq %r10, 40 (%rdi)
+ movq %r11, 48 (%rdi)
+ movq %r12, 56 (%rdi)
+
+ leaq 64 (%rsi), %rsi
+ leaq 64 (%rdi), %rdi
+
+ jnz .Loop64
+
+ movl $5,%ecx
+ .p2align 4
+.Loop2:
+ decl %ecx
+
+ movq (%rsi), %rax
+ movq 8 (%rsi), %rbx
+ movq 16 (%rsi), %rdx
+ movq 24 (%rsi), %r8
+ movq 32 (%rsi), %r9
+ movq 40 (%rsi), %r10
+ movq 48 (%rsi), %r11
+ movq 56 (%rsi), %r12
+
+ movq %rax, (%rdi)
+ movq %rbx, 8 (%rdi)
+ movq %rdx, 16 (%rdi)
+ movq %r8, 24 (%rdi)
+ movq %r9, 32 (%rdi)
+ movq %r10, 40 (%rdi)
+ movq %r11, 48 (%rdi)
+ movq %r12, 56 (%rdi)
+
+ leaq 64(%rdi),%rdi
+ leaq 64(%rsi),%rsi
+
+ jnz .Loop2
+
+ movq (%rsp),%rbx
+ CFI_RESTORE rbx
+ movq 1*8(%rsp),%r12
+ CFI_RESTORE r12
+ movq 2*8(%rsp),%r13
+ CFI_RESTORE r13
+ addq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -3*8
+ ret
+.Lcopy_page_end:
+ CFI_ENDPROC
+ENDPROC(copy_page)
+
+ /* Some CPUs run faster using the string copy instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */
+2:
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad copy_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lcopy_page_end - copy_page
+ .byte 2b - 1b
+ .previous
--- /dev/null
+/* Copyright 2002 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License v2.
+ *
+ * Functions to copy from and to user space.
+ */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+#define FIX_ALIGNMENT 1
+
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpufeature.h>
+
+ .macro ALTERNATIVE_JUMP feature,orig,alt
+0:
+ .byte 0xe9 /* 32bit jump */
+ .long \orig-1f /* by default jump to orig */
+1:
+ .section .altinstr_replacement,"ax"
+2: .byte 0xe9 /* near jump with 32bit immediate */
+ .long \alt-1b /* offset */ /* or alternatively to alt */
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad 0b
+ .quad 2b
+ .byte \feature /* when feature is set */
+ .byte 5
+ .byte 5
+ .previous
+ .endm
+
+/* Standard copy_to_user with segment limit checking */
+ENTRY(copy_to_user)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%rax)
+ movq %rdi,%rcx
+ addq %rdx,%rcx
+ jc bad_to_user
+ cmpq threadinfo_addr_limit(%rax),%rcx
+ jae bad_to_user
+ xorl %eax,%eax /* clear zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+
+ENTRY(copy_user_generic)
+ CFI_STARTPROC
+ movl $1,%ecx /* set zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+
+ENTRY(__copy_from_user_inatomic)
+ CFI_STARTPROC
+ xorl %ecx,%ecx /* clear zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+
+/* Standard copy_from_user with segment limit checking */
+ENTRY(copy_from_user)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%rax)
+ movq %rsi,%rcx
+ addq %rdx,%rcx
+ jc bad_from_user
+ cmpq threadinfo_addr_limit(%rax),%rcx
+ jae bad_from_user
+ movl $1,%ecx /* set zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+ENDPROC(copy_from_user)
+
+ .section .fixup,"ax"
+ /* must zero dest */
+bad_from_user:
+ CFI_STARTPROC
+ movl %edx,%ecx
+ xorl %eax,%eax
+ rep
+ stosb
+bad_to_user:
+ movl %edx,%eax
+ ret
+ CFI_ENDPROC
+END(bad_from_user)
+ .previous
+
+
+/*
+ * copy_user_generic_unrolled - memory copy with exception handling.
+ * This version is for CPUs like P4 that don't have efficient micro code for rep movsq
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ * ecx zero flag -- if true zero destination on error
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successful.
+ */
+ENTRY(copy_user_generic_unrolled)
+ CFI_STARTPROC
+ pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
+ pushq %rcx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rcx, 0
+ xorl %eax,%eax /*zero for the exception handler */
+
+#ifdef FIX_ALIGNMENT
+ /* check for bad alignment of destination */
+ movl %edi,%ecx
+ andl $7,%ecx
+ jnz .Lbad_alignment
+.Lafter_bad_alignment:
+#endif
+
+ movq %rdx,%rcx
+
+ movl $64,%ebx
+ shrq $6,%rdx
+ decq %rdx
+ js .Lhandle_tail
+
+ .p2align 4
+.Lloop:
+.Ls1: movq (%rsi),%r11
+.Ls2: movq 1*8(%rsi),%r8
+.Ls3: movq 2*8(%rsi),%r9
+.Ls4: movq 3*8(%rsi),%r10
+.Ld1: movq %r11,(%rdi)
+.Ld2: movq %r8,1*8(%rdi)
+.Ld3: movq %r9,2*8(%rdi)
+.Ld4: movq %r10,3*8(%rdi)
+
+.Ls5: movq 4*8(%rsi),%r11
+.Ls6: movq 5*8(%rsi),%r8
+.Ls7: movq 6*8(%rsi),%r9
+.Ls8: movq 7*8(%rsi),%r10
+.Ld5: movq %r11,4*8(%rdi)
+.Ld6: movq %r8,5*8(%rdi)
+.Ld7: movq %r9,6*8(%rdi)
+.Ld8: movq %r10,7*8(%rdi)
+
+ decq %rdx
+
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+
+ jns .Lloop
+
+ .p2align 4
+.Lhandle_tail:
+ movl %ecx,%edx
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lhandle_7
+ movl $8,%ebx
+ .p2align 4
+.Lloop_8:
+.Ls9: movq (%rsi),%r8
+.Ld9: movq %r8,(%rdi)
+ decl %ecx
+ leaq 8(%rdi),%rdi
+ leaq 8(%rsi),%rsi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %edx,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+.Ls10: movb (%rsi),%bl
+.Ld10: movb %bl,(%rdi)
+ incq %rdi
+ incq %rsi
+ decl %ecx
+ jnz .Lloop_1
+
+ CFI_REMEMBER_STATE
+.Lende:
+ popq %rcx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rcx
+ popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
+ ret
+ CFI_RESTORE_STATE
+
+#ifdef FIX_ALIGNMENT
+ /* align destination */
+ .p2align 4
+.Lbad_alignment:
+ movl $8,%r9d
+ subl %ecx,%r9d
+ movl %r9d,%ecx
+ cmpq %r9,%rdx
+ jz .Lhandle_7
+ js .Lhandle_7
+.Lalign_1:
+.Ls11: movb (%rsi),%bl
+.Ld11: movb %bl,(%rdi)
+ incq %rsi
+ incq %rdi
+ decl %ecx
+ jnz .Lalign_1
+ subq %r9,%rdx
+ jmp .Lafter_bad_alignment
+#endif
+
+ /* table sorted by exception address */
+ .section __ex_table,"a"
+ .align 8
+ .quad .Ls1,.Ls1e
+ .quad .Ls2,.Ls2e
+ .quad .Ls3,.Ls3e
+ .quad .Ls4,.Ls4e
+ .quad .Ld1,.Ls1e
+ .quad .Ld2,.Ls2e
+ .quad .Ld3,.Ls3e
+ .quad .Ld4,.Ls4e
+ .quad .Ls5,.Ls5e
+ .quad .Ls6,.Ls6e
+ .quad .Ls7,.Ls7e
+ .quad .Ls8,.Ls8e
+ .quad .Ld5,.Ls5e
+ .quad .Ld6,.Ls6e
+ .quad .Ld7,.Ls7e
+ .quad .Ld8,.Ls8e
+ .quad .Ls9,.Le_quad
+ .quad .Ld9,.Le_quad
+ .quad .Ls10,.Le_byte
+ .quad .Ld10,.Le_byte
+#ifdef FIX_ALIGNMENT
+ .quad .Ls11,.Lzero_rest
+ .quad .Ld11,.Lzero_rest
+#endif
+ .quad .Le5,.Le_zero
+ .previous
+
+ /* compute 64-offset for main loop. 8 bytes accuracy with error on the
+ pessimistic side. this is gross. it would be better to fix the
+ interface. */
+ /* eax: zero, ebx: 64 */
+.Ls1e: addl $8,%eax
+.Ls2e: addl $8,%eax
+.Ls3e: addl $8,%eax
+.Ls4e: addl $8,%eax
+.Ls5e: addl $8,%eax
+.Ls6e: addl $8,%eax
+.Ls7e: addl $8,%eax
+.Ls8e: addl $8,%eax
+ addq %rbx,%rdi /* +64 */
+ subq %rax,%rdi /* correct destination with computed offset */
+
+ shlq $6,%rdx /* loop counter * 64 (stride length) */
+ addq %rax,%rdx /* add offset to loopcnt */
+ andl $63,%ecx /* remaining bytes */
+ addq %rcx,%rdx /* add them */
+ jmp .Lzero_rest
+
+ /* exception on quad word loop in tail handling */
+ /* ecx: loopcnt/8, %edx: length, rdi: correct */
+.Le_quad:
+ shll $3,%ecx
+ andl $7,%edx
+ addl %ecx,%edx
+ /* edx: bytes to zero, rdi: dest, eax:zero */
+.Lzero_rest:
+ cmpl $0,(%rsp)
+ jz .Le_zero
+ movq %rdx,%rcx
+.Le_byte:
+ xorl %eax,%eax
+.Le5: rep
+ stosb
+ /* when there is another exception while zeroing the rest just return */
+.Le_zero:
+ movq %rdx,%rax
+ jmp .Lende
+ CFI_ENDPROC
+ENDPROC(copy_user_generic)
+
+
+ /* Some CPUs run faster using the string copy instructions.
+ This is also a lot simpler. Use them when possible.
+ Patch in jmps to this code instead of copying it fully
+ to avoid unwanted aliasing in the exception tables. */
+
+ /* rdi destination
+ * rsi source
+ * rdx count
+ * ecx zero flag
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successfull.
+ *
+ * Only 4GB of copy is supported. This shouldn't be a problem
+ * because the kernel normally only writes from/to page sized chunks
+ * even if user space passed a longer buffer.
+ * And more would be dangerous because both Intel and AMD have
+ * errata with rep movsq > 4GB. If someone feels the need to fix
+ * this please consider this.
+ */
+ENTRY(copy_user_generic_string)
+ CFI_STARTPROC
+ movl %ecx,%r8d /* save zero flag */
+ movl %edx,%ecx
+ shrl $3,%ecx
+ andl $7,%edx
+ jz 10f
+1: rep
+ movsq
+ movl %edx,%ecx
+2: rep
+ movsb
+9: movl %ecx,%eax
+ ret
+
+ /* multiple of 8 byte */
+10: rep
+ movsq
+ xor %eax,%eax
+ ret
+
+ /* exception handling */
+3: lea (%rdx,%rcx,8),%rax /* exception on quad loop */
+ jmp 6f
+5: movl %ecx,%eax /* exception on byte loop */
+ /* eax: left over bytes */
+6: testl %r8d,%r8d /* zero flag set? */
+ jz 7f
+ movl %eax,%ecx /* initialize x86 loop counter */
+ push %rax
+ xorl %eax,%eax
+8: rep
+ stosb /* zero the rest */
+11: pop %rax
+7: ret
+ CFI_ENDPROC
+END(copy_user_generic_c)
+
+ .section __ex_table,"a"
+ .quad 1b,3b
+ .quad 2b,5b
+ .quad 8b,11b
+ .quad 10b,3b
+ .previous
--- /dev/null
+/* Copyright 2002 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License v2.
+ *
+ * Functions to copy from and to user space.
+ */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+#define FIX_ALIGNMENT 1
+
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpufeature.h>
+
+/*
+ * copy_user_nocache - Uncached memory copy with exception handling
+ * This will force destination/source out of cache for more performance.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ * rcx zero flag when 1 zero on exception
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successful.
+ */
+ENTRY(__copy_user_nocache)
+ CFI_STARTPROC
+ pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
+ pushq %rcx /* save zero flag */
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rcx, 0
+
+ xorl %eax,%eax /* zero for the exception handler */
+
+#ifdef FIX_ALIGNMENT
+ /* check for bad alignment of destination */
+ movl %edi,%ecx
+ andl $7,%ecx
+ jnz .Lbad_alignment
+.Lafter_bad_alignment:
+#endif
+
+ movq %rdx,%rcx
+
+ movl $64,%ebx
+ shrq $6,%rdx
+ decq %rdx
+ js .Lhandle_tail
+
+ .p2align 4
+.Lloop:
+.Ls1: movq (%rsi),%r11
+.Ls2: movq 1*8(%rsi),%r8
+.Ls3: movq 2*8(%rsi),%r9
+.Ls4: movq 3*8(%rsi),%r10
+.Ld1: movnti %r11,(%rdi)
+.Ld2: movnti %r8,1*8(%rdi)
+.Ld3: movnti %r9,2*8(%rdi)
+.Ld4: movnti %r10,3*8(%rdi)
+
+.Ls5: movq 4*8(%rsi),%r11
+.Ls6: movq 5*8(%rsi),%r8
+.Ls7: movq 6*8(%rsi),%r9
+.Ls8: movq 7*8(%rsi),%r10
+.Ld5: movnti %r11,4*8(%rdi)
+.Ld6: movnti %r8,5*8(%rdi)
+.Ld7: movnti %r9,6*8(%rdi)
+.Ld8: movnti %r10,7*8(%rdi)
+
+ dec %rdx
+
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+
+ jns .Lloop
+
+ .p2align 4
+.Lhandle_tail:
+ movl %ecx,%edx
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lhandle_7
+ movl $8,%ebx
+ .p2align 4
+.Lloop_8:
+.Ls9: movq (%rsi),%r8
+.Ld9: movnti %r8,(%rdi)
+ decl %ecx
+ leaq 8(%rdi),%rdi
+ leaq 8(%rsi),%rsi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %edx,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+.Ls10: movb (%rsi),%bl
+.Ld10: movb %bl,(%rdi)
+ incq %rdi
+ incq %rsi
+ decl %ecx
+ jnz .Lloop_1
+
+ CFI_REMEMBER_STATE
+.Lende:
+ popq %rcx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE %rcx
+ popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
+ ret
+ CFI_RESTORE_STATE
+
+#ifdef FIX_ALIGNMENT
+ /* align destination */
+ .p2align 4
+.Lbad_alignment:
+ movl $8,%r9d
+ subl %ecx,%r9d
+ movl %r9d,%ecx
+ cmpq %r9,%rdx
+ jz .Lhandle_7
+ js .Lhandle_7
+.Lalign_1:
+.Ls11: movb (%rsi),%bl
+.Ld11: movb %bl,(%rdi)
+ incq %rsi
+ incq %rdi
+ decl %ecx
+ jnz .Lalign_1
+ subq %r9,%rdx
+ jmp .Lafter_bad_alignment
+#endif
+
+ /* table sorted by exception address */
+ .section __ex_table,"a"
+ .align 8
+ .quad .Ls1,.Ls1e
+ .quad .Ls2,.Ls2e
+ .quad .Ls3,.Ls3e
+ .quad .Ls4,.Ls4e
+ .quad .Ld1,.Ls1e
+ .quad .Ld2,.Ls2e
+ .quad .Ld3,.Ls3e
+ .quad .Ld4,.Ls4e
+ .quad .Ls5,.Ls5e
+ .quad .Ls6,.Ls6e
+ .quad .Ls7,.Ls7e
+ .quad .Ls8,.Ls8e
+ .quad .Ld5,.Ls5e
+ .quad .Ld6,.Ls6e
+ .quad .Ld7,.Ls7e
+ .quad .Ld8,.Ls8e
+ .quad .Ls9,.Le_quad
+ .quad .Ld9,.Le_quad
+ .quad .Ls10,.Le_byte
+ .quad .Ld10,.Le_byte
+#ifdef FIX_ALIGNMENT
+ .quad .Ls11,.Lzero_rest
+ .quad .Ld11,.Lzero_rest
+#endif
+ .quad .Le5,.Le_zero
+ .previous
+
+ /* compute 64-offset for main loop. 8 bytes accuracy with error on the
+ pessimistic side. this is gross. it would be better to fix the
+ interface. */
+ /* eax: zero, ebx: 64 */
+.Ls1e: addl $8,%eax
+.Ls2e: addl $8,%eax
+.Ls3e: addl $8,%eax
+.Ls4e: addl $8,%eax
+.Ls5e: addl $8,%eax
+.Ls6e: addl $8,%eax
+.Ls7e: addl $8,%eax
+.Ls8e: addl $8,%eax
+ addq %rbx,%rdi /* +64 */
+ subq %rax,%rdi /* correct destination with computed offset */
+
+ shlq $6,%rdx /* loop counter * 64 (stride length) */
+ addq %rax,%rdx /* add offset to loopcnt */
+ andl $63,%ecx /* remaining bytes */
+ addq %rcx,%rdx /* add them */
+ jmp .Lzero_rest
+
+ /* exception on quad word loop in tail handling */
+ /* ecx: loopcnt/8, %edx: length, rdi: correct */
+.Le_quad:
+ shll $3,%ecx
+ andl $7,%edx
+ addl %ecx,%edx
+ /* edx: bytes to zero, rdi: dest, eax:zero */
+.Lzero_rest:
+ cmpl $0,(%rsp) /* zero flag set? */
+ jz .Le_zero
+ movq %rdx,%rcx
+.Le_byte:
+ xorl %eax,%eax
+.Le5: rep
+ stosb
+ /* when there is another exception while zeroing the rest just return */
+.Le_zero:
+ movq %rdx,%rax
+ jmp .Lende
+ CFI_ENDPROC
+ENDPROC(__copy_user_nocache)
+
+
--- /dev/null
+/*
+ * Copyright 2002,2003 Andi Kleen, SuSE Labs.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details. No warranty for anything given at all.
+ */
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/errno.h>
+
+/*
+ * Checksum copy with exception handling.
+ * On exceptions src_err_ptr or dst_err_ptr is set to -EFAULT and the
+ * destination is zeroed.
+ *
+ * Input
+ * rdi source
+ * rsi destination
+ * edx len (32bit)
+ * ecx sum (32bit)
+ * r8 src_err_ptr (int)
+ * r9 dst_err_ptr (int)
+ *
+ * Output
+ * eax 64bit sum. undefined in case of exception.
+ *
+ * Wrappers need to take care of valid exception sum and zeroing.
+ * They also should align source or destination to 8 bytes.
+ */
+
+ .macro source
+10:
+ .section __ex_table,"a"
+ .align 8
+ .quad 10b,.Lbad_source
+ .previous
+ .endm
+
+ .macro dest
+20:
+ .section __ex_table,"a"
+ .align 8
+ .quad 20b,.Lbad_dest
+ .previous
+ .endm
+
+ .macro ignore L=.Lignore
+30:
+ .section __ex_table,"a"
+ .align 8
+ .quad 30b,\L
+ .previous
+ .endm
+
+
+ENTRY(csum_partial_copy_generic)
+ CFI_STARTPROC
+ cmpl $3*64,%edx
+ jle .Lignore
+
+.Lignore:
+ subq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 7*8
+ movq %rbx,2*8(%rsp)
+ CFI_REL_OFFSET rbx, 2*8
+ movq %r12,3*8(%rsp)
+ CFI_REL_OFFSET r12, 3*8
+ movq %r14,4*8(%rsp)
+ CFI_REL_OFFSET r14, 4*8
+ movq %r13,5*8(%rsp)
+ CFI_REL_OFFSET r13, 5*8
+ movq %rbp,6*8(%rsp)
+ CFI_REL_OFFSET rbp, 6*8
+
+ movq %r8,(%rsp)
+ movq %r9,1*8(%rsp)
+
+ movl %ecx,%eax
+ movl %edx,%ecx
+
+ xorl %r9d,%r9d
+ movq %rcx,%r12
+
+ shrq $6,%r12
+ jz .Lhandle_tail /* < 64 */
+
+ clc
+
+ /* main loop. clear in 64 byte blocks */
+ /* r9: zero, r8: temp2, rbx: temp1, rax: sum, rcx: saved length */
+ /* r11: temp3, rdx: temp4, r12 loopcnt */
+ /* r10: temp5, rbp: temp6, r14 temp7, r13 temp8 */
+ .p2align 4
+.Lloop:
+ source
+ movq (%rdi),%rbx
+ source
+ movq 8(%rdi),%r8
+ source
+ movq 16(%rdi),%r11
+ source
+ movq 24(%rdi),%rdx
+
+ source
+ movq 32(%rdi),%r10
+ source
+ movq 40(%rdi),%rbp
+ source
+ movq 48(%rdi),%r14
+ source
+ movq 56(%rdi),%r13
+
+ ignore 2f
+ prefetcht0 5*64(%rdi)
+2:
+ adcq %rbx,%rax
+ adcq %r8,%rax
+ adcq %r11,%rax
+ adcq %rdx,%rax
+ adcq %r10,%rax
+ adcq %rbp,%rax
+ adcq %r14,%rax
+ adcq %r13,%rax
+
+ decl %r12d
+
+ dest
+ movq %rbx,(%rsi)
+ dest
+ movq %r8,8(%rsi)
+ dest
+ movq %r11,16(%rsi)
+ dest
+ movq %rdx,24(%rsi)
+
+ dest
+ movq %r10,32(%rsi)
+ dest
+ movq %rbp,40(%rsi)
+ dest
+ movq %r14,48(%rsi)
+ dest
+ movq %r13,56(%rsi)
+
+3:
+
+ leaq 64(%rdi),%rdi
+ leaq 64(%rsi),%rsi
+
+ jnz .Lloop
+
+ adcq %r9,%rax
+
+ /* do last upto 56 bytes */
+.Lhandle_tail:
+ /* ecx: count */
+ movl %ecx,%r10d
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lfold
+ clc
+ .p2align 4
+.Lloop_8:
+ source
+ movq (%rdi),%rbx
+ adcq %rbx,%rax
+ decl %ecx
+ dest
+ movq %rbx,(%rsi)
+ leaq 8(%rsi),%rsi /* preserve carry */
+ leaq 8(%rdi),%rdi
+ jnz .Lloop_8
+ adcq %r9,%rax /* add in carry */
+
+.Lfold:
+ /* reduce checksum to 32bits */
+ movl %eax,%ebx
+ shrq $32,%rax
+ addl %ebx,%eax
+ adcl %r9d,%eax
+
+ /* do last upto 6 bytes */
+.Lhandle_7:
+ movl %r10d,%ecx
+ andl $7,%ecx
+ shrl $1,%ecx
+ jz .Lhandle_1
+ movl $2,%edx
+ xorl %ebx,%ebx
+ clc
+ .p2align 4
+.Lloop_1:
+ source
+ movw (%rdi),%bx
+ adcl %ebx,%eax
+ decl %ecx
+ dest
+ movw %bx,(%rsi)
+ leaq 2(%rdi),%rdi
+ leaq 2(%rsi),%rsi
+ jnz .Lloop_1
+ adcl %r9d,%eax /* add in carry */
+
+ /* handle last odd byte */
+.Lhandle_1:
+ testl $1,%r10d
+ jz .Lende
+ xorl %ebx,%ebx
+ source
+ movb (%rdi),%bl
+ dest
+ movb %bl,(%rsi)
+ addl %ebx,%eax
+ adcl %r9d,%eax /* carry */
+
+ CFI_REMEMBER_STATE
+.Lende:
+ movq 2*8(%rsp),%rbx
+ CFI_RESTORE rbx
+ movq 3*8(%rsp),%r12
+ CFI_RESTORE r12
+ movq 4*8(%rsp),%r14
+ CFI_RESTORE r14
+ movq 5*8(%rsp),%r13
+ CFI_RESTORE r13
+ movq 6*8(%rsp),%rbp
+ CFI_RESTORE rbp
+ addq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -7*8
+ ret
+ CFI_RESTORE_STATE
+
+ /* Exception handlers. Very simple, zeroing is done in the wrappers */
+.Lbad_source:
+ movq (%rsp),%rax
+ testq %rax,%rax
+ jz .Lende
+ movl $-EFAULT,(%rax)
+ jmp .Lende
+
+.Lbad_dest:
+ movq 8(%rsp),%rax
+ testq %rax,%rax
+ jz .Lende
+ movl $-EFAULT,(%rax)
+ jmp .Lende
+ CFI_ENDPROC
+ENDPROC(csum_partial_copy_generic)
--- /dev/null
+/*
+ * arch/x86_64/lib/csum-partial.c
+ *
+ * This file contains network checksum routines that are better done
+ * in an architecture-specific manner due to speed.
+ */
+
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <asm/checksum.h>
+
+static inline unsigned short from32to16(unsigned a)
+{
+ unsigned short b = a >> 16;
+ asm("addw %w2,%w0\n\t"
+ "adcw $0,%w0\n"
+ : "=r" (b)
+ : "0" (b), "r" (a));
+ return b;
+}
+
+/*
+ * Do a 64-bit checksum on an arbitrary memory area.
+ * Returns a 32bit checksum.
+ *
+ * This isn't as time critical as it used to be because many NICs
+ * do hardware checksumming these days.
+ *
+ * Things tried and found to not make it faster:
+ * Manual Prefetching
+ * Unrolling to an 128 bytes inner loop.
+ * Using interleaving with more registers to break the carry chains.
+ */
+static unsigned do_csum(const unsigned char *buff, unsigned len)
+{
+ unsigned odd, count;
+ unsigned long result = 0;
+
+ if (unlikely(len == 0))
+ return result;
+ odd = 1 & (unsigned long) buff;
+ if (unlikely(odd)) {
+ result = *buff << 8;
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(unsigned short *)buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+ unsigned long zero;
+ unsigned count64;
+ if (4 & (unsigned long) buff) {
+ result += *(unsigned int *) buff;
+ count--;
+ len -= 4;
+ buff += 4;
+ }
+ count >>= 1; /* nr of 64-bit words.. */
+
+ /* main loop using 64byte blocks */
+ zero = 0;
+ count64 = count >> 3;
+ while (count64) {
+ asm("addq 0*8(%[src]),%[res]\n\t"
+ "adcq 1*8(%[src]),%[res]\n\t"
+ "adcq 2*8(%[src]),%[res]\n\t"
+ "adcq 3*8(%[src]),%[res]\n\t"
+ "adcq 4*8(%[src]),%[res]\n\t"
+ "adcq 5*8(%[src]),%[res]\n\t"
+ "adcq 6*8(%[src]),%[res]\n\t"
+ "adcq 7*8(%[src]),%[res]\n\t"
+ "adcq %[zero],%[res]"
+ : [res] "=r" (result)
+ : [src] "r" (buff), [zero] "r" (zero),
+ "[res]" (result));
+ buff += 64;
+ count64--;
+ }
+
+ /* last upto 7 8byte blocks */
+ count %= 8;
+ while (count) {
+ asm("addq %1,%0\n\t"
+ "adcq %2,%0\n"
+ : "=r" (result)
+ : "m" (*(unsigned long *)buff),
+ "r" (zero), "0" (result));
+ --count;
+ buff += 8;
+ }
+ result = add32_with_carry(result>>32,
+ result&0xffffffff);
+
+ if (len & 4) {
+ result += *(unsigned int *) buff;
+ buff += 4;
+ }
+ }
+ if (len & 2) {
+ result += *(unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += *buff;
+ result = add32_with_carry(result>>32, result & 0xffffffff);
+ if (unlikely(odd)) {
+ result = from32to16(result);
+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+ }
+ return result;
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 64-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ return (__force __wsum)add32_with_carry(do_csum(buff, len),
+ (__force u32)sum);
+}
+
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold(csum_partial(buff,len,0));
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
--- /dev/null
+/* Copyright 2002,2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License v.2
+ *
+ * Wrappers of assembly checksum functions for x86-64.
+ */
+
+#include <asm/checksum.h>
+#include <linux/module.h>
+
+/**
+ * csum_partial_copy_from_user - Copy and checksum from user space.
+ * @src: source address (user space)
+ * @dst: destination address
+ * @len: number of bytes to be copied.
+ * @isum: initial sum that is added into the result (32bit unfolded)
+ * @errp: set to -EFAULT for an bad source address.
+ *
+ * Returns an 32bit unfolded checksum of the buffer.
+ * src and dst are best aligned to 64bits.
+ */
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum isum, int *errp)
+{
+ might_sleep();
+ *errp = 0;
+ if (likely(access_ok(VERIFY_READ,src, len))) {
+ /* Why 6, not 7? To handle odd addresses aligned we
+ would need to do considerable complications to fix the
+ checksum which is defined as an 16bit accumulator. The
+ fix alignment code is primarily for performance
+ compatibility with 32bit and that will handle odd
+ addresses slowly too. */
+ if (unlikely((unsigned long)src & 6)) {
+ while (((unsigned long)src & 6) && len >= 2) {
+ __u16 val16;
+ *errp = __get_user(val16, (const __u16 __user *)src);
+ if (*errp)
+ return isum;
+ *(__u16 *)dst = val16;
+ isum = (__force __wsum)add32_with_carry(
+ (__force unsigned)isum, val16);
+ src += 2;
+ dst += 2;
+ len -= 2;
+ }
+ }
+ isum = csum_partial_copy_generic((__force const void *)src,
+ dst, len, isum, errp, NULL);
+ if (likely(*errp == 0))
+ return isum;
+ }
+ *errp = -EFAULT;
+ memset(dst,0,len);
+ return isum;
+}
+
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/**
+ * csum_partial_copy_to_user - Copy and checksum to user space.
+ * @src: source address
+ * @dst: destination address (user space)
+ * @len: number of bytes to be copied.
+ * @isum: initial sum that is added into the result (32bit unfolded)
+ * @errp: set to -EFAULT for an bad destination address.
+ *
+ * Returns an 32bit unfolded checksum of the buffer.
+ * src and dst are best aligned to 64bits.
+ */
+__wsum
+csum_partial_copy_to_user(const void *src, void __user *dst,
+ int len, __wsum isum, int *errp)
+{
+ might_sleep();
+ if (unlikely(!access_ok(VERIFY_WRITE, dst, len))) {
+ *errp = -EFAULT;
+ return 0;
+ }
+
+ if (unlikely((unsigned long)dst & 6)) {
+ while (((unsigned long)dst & 6) && len >= 2) {
+ __u16 val16 = *(__u16 *)src;
+ isum = (__force __wsum)add32_with_carry(
+ (__force unsigned)isum, val16);
+ *errp = __put_user(val16, (__u16 __user *)dst);
+ if (*errp)
+ return isum;
+ src += 2;
+ dst += 2;
+ len -= 2;
+ }
+ }
+
+ *errp = 0;
+ return csum_partial_copy_generic(src, (void __force *)dst,len,isum,NULL,errp);
+}
+
+EXPORT_SYMBOL(csum_partial_copy_to_user);
+
+/**
+ * csum_partial_copy_nocheck - Copy and checksum.
+ * @src: source address
+ * @dst: destination address
+ * @len: number of bytes to be copied.
+ * @isum: initial sum that is added into the result (32bit unfolded)
+ *
+ * Returns an 32bit unfolded checksum of the buffer.
+ */
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+ return csum_partial_copy_generic(src,dst,len,sum,NULL,NULL);
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ __u64 rest, sum64;
+
+ rest = (__force __u64)htonl(len) + (__force __u64)htons(proto) +
+ (__force __u64)sum;
+ asm(" addq (%[saddr]),%[sum]\n"
+ " adcq 8(%[saddr]),%[sum]\n"
+ " adcq (%[daddr]),%[sum]\n"
+ " adcq 8(%[daddr]),%[sum]\n"
+ " adcq $0,%[sum]\n"
+ : [sum] "=r" (sum64)
+ : "[sum]" (rest),[saddr] "r" (saddr), [daddr] "r" (daddr));
+ return csum_fold((__force __wsum)add32_with_carry(sum64 & 0xffffffff, sum64>>32));
+}
+
+EXPORT_SYMBOL(csum_ipv6_magic);
--- /dev/null
+/*
+ * Precise Delay Loops for x86-64
+ *
+ * Copyright (C) 1993 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * The __delay function must _NOT_ be inlined as its execution time
+ * depends wildly on alignment on many x86 processors.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <asm/msr.h>
+
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+int read_current_timer(unsigned long *timer_value)
+{
+ rdtscll(*timer_value);
+ return 0;
+}
+
+void __delay(unsigned long loops)
+{
+ unsigned bclock, now;
+
+ rdtscl(bclock);
+ do
+ {
+ rep_nop();
+ rdtscl(now);
+ }
+ while((now-bclock) < loops);
+}
+EXPORT_SYMBOL(__delay);
+
+inline void __const_udelay(unsigned long xloops)
+{
+ __delay(((xloops * HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy) >> 32) + 1);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
--- /dev/null
+/*
+ * __get_user functions.
+ *
+ * (C) Copyright 1998 Linus Torvalds
+ * (C) Copyright 2005 Andi Kleen
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+
+/*
+ * __get_user_X
+ *
+ * Inputs: %rcx contains the address.
+ * The register is modified, but all changes are undone
+ * before returning because the C code doesn't know about it.
+ *
+ * Outputs: %rax is error code (0 or -EFAULT)
+ * %rdx contains zero-extended value
+ *
+ * %r8 is destroyed.
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/page.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+ .text
+ENTRY(__get_user_1)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae bad_get_user
+1: movzb (%rcx),%edx
+ xorl %eax,%eax
+ ret
+ CFI_ENDPROC
+ENDPROC(__get_user_1)
+
+ENTRY(__get_user_2)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $1,%rcx
+ jc 20f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 20f
+ decq %rcx
+2: movzwl (%rcx),%edx
+ xorl %eax,%eax
+ ret
+20: decq %rcx
+ jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_2)
+
+ENTRY(__get_user_4)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $3,%rcx
+ jc 30f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 30f
+ subq $3,%rcx
+3: movl (%rcx),%edx
+ xorl %eax,%eax
+ ret
+30: subq $3,%rcx
+ jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_4)
+
+ENTRY(__get_user_8)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $7,%rcx
+ jc 40f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 40f
+ subq $7,%rcx
+4: movq (%rcx),%rdx
+ xorl %eax,%eax
+ ret
+40: subq $7,%rcx
+ jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_8)
+
+bad_get_user:
+ CFI_STARTPROC
+ xorl %edx,%edx
+ movq $(-EFAULT),%rax
+ ret
+ CFI_ENDPROC
+END(bad_get_user)
+
+.section __ex_table,"a"
+ .quad 1b,bad_get_user
+ .quad 2b,bad_get_user
+ .quad 3b,bad_get_user
+ .quad 4b,bad_get_user
+.previous
--- /dev/null
+#include <linux/string.h>
+#include <asm/io.h>
+#include <linux/module.h>
+
+void __memcpy_toio(unsigned long dst,const void*src,unsigned len)
+{
+ __inline_memcpy((void *) dst,src,len);
+}
+EXPORT_SYMBOL(__memcpy_toio);
+
+void __memcpy_fromio(void *dst,unsigned long src,unsigned len)
+{
+ __inline_memcpy(dst,(const void *) src,len);
+}
+EXPORT_SYMBOL(__memcpy_fromio);
+
+void memset_io(volatile void __iomem *a, int b, size_t c)
+{
+ /* XXX: memset can mangle the IO patterns quite a bit.
+ perhaps it would be better to use a dumb one */
+ memset((void *)a,b,c);
+}
+EXPORT_SYMBOL(memset_io);
--- /dev/null
+/*
+ * Copyright 2006 PathScale, Inc. All Rights Reserved.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * override generic version in lib/iomap_copy.c
+ */
+ENTRY(__iowrite32_copy)
+ CFI_STARTPROC
+ movl %edx,%ecx
+ rep movsd
+ ret
+ CFI_ENDPROC
+ENDPROC(__iowrite32_copy)
--- /dev/null
+/* Copyright 2002 Andi Kleen */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
+
+/*
+ * memcpy - Copy a memory block.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * rax original destination
+ */
+
+ ALIGN
+memcpy_c:
+ CFI_STARTPROC
+ movq %rdi,%rax
+ movl %edx,%ecx
+ shrl $3,%ecx
+ andl $7,%edx
+ rep movsq
+ movl %edx,%ecx
+ rep movsb
+ ret
+ CFI_ENDPROC
+ENDPROC(memcpy_c)
+
+ENTRY(__memcpy)
+ENTRY(memcpy)
+ CFI_STARTPROC
+ pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
+ movq %rdi,%rax
+
+ movl %edx,%ecx
+ shrl $6,%ecx
+ jz .Lhandle_tail
+
+ .p2align 4
+.Lloop_64:
+ decl %ecx
+
+ movq (%rsi),%r11
+ movq 8(%rsi),%r8
+
+ movq %r11,(%rdi)
+ movq %r8,1*8(%rdi)
+
+ movq 2*8(%rsi),%r9
+ movq 3*8(%rsi),%r10
+
+ movq %r9,2*8(%rdi)
+ movq %r10,3*8(%rdi)
+
+ movq 4*8(%rsi),%r11
+ movq 5*8(%rsi),%r8
+
+ movq %r11,4*8(%rdi)
+ movq %r8,5*8(%rdi)
+
+ movq 6*8(%rsi),%r9
+ movq 7*8(%rsi),%r10
+
+ movq %r9,6*8(%rdi)
+ movq %r10,7*8(%rdi)
+
+ leaq 64(%rsi),%rsi
+ leaq 64(%rdi),%rdi
+ jnz .Lloop_64
+
+.Lhandle_tail:
+ movl %edx,%ecx
+ andl $63,%ecx
+ shrl $3,%ecx
+ jz .Lhandle_7
+ .p2align 4
+.Lloop_8:
+ decl %ecx
+ movq (%rsi),%r8
+ movq %r8,(%rdi)
+ leaq 8(%rdi),%rdi
+ leaq 8(%rsi),%rsi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %edx,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+ movb (%rsi),%r8b
+ movb %r8b,(%rdi)
+ incq %rdi
+ incq %rsi
+ decl %ecx
+ jnz .Lloop_1
+
+.Lende:
+ popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
+ ret
+.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memcpy)
+ENDPROC(__memcpy)
+
+ /* Some CPUs run faster using the string copy instructions.
+ It is also a lot simpler. Use this when possible */
+
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */
+2:
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad memcpy
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ /* Replace only beginning, memcpy is used to apply alternatives, so it
+ * is silly to overwrite itself with nops - reboot is only outcome... */
+ .byte 2b - 1b
+ .byte 2b - 1b
+ .previous
--- /dev/null
+/* Normally compiler builtins are used, but sometimes the compiler calls out
+ of line code. Based on asm-i386/string.h.
+ */
+#define _STRING_C
+#include <linux/string.h>
+#include <linux/module.h>
+
+#undef memmove
+void *memmove(void * dest,const void *src,size_t count)
+{
+ if (dest < src) {
+ return memcpy(dest,src,count);
+ } else {
+ char *p = (char *) dest + count;
+ char *s = (char *) src + count;
+ while (count--)
+ *--p = *--s;
+ }
+ return dest;
+}
+EXPORT_SYMBOL(memmove);
--- /dev/null
+/* Copyright 2002 Andi Kleen, SuSE Labs */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * ISO C memset - set a memory block to a byte value.
+ *
+ * rdi destination
+ * rsi value (char)
+ * rdx count (bytes)
+ *
+ * rax original destination
+ */
+ ALIGN
+memset_c:
+ CFI_STARTPROC
+ movq %rdi,%r9
+ movl %edx,%r8d
+ andl $7,%r8d
+ movl %edx,%ecx
+ shrl $3,%ecx
+ /* expand byte value */
+ movzbl %sil,%esi
+ movabs $0x0101010101010101,%rax
+ mulq %rsi /* with rax, clobbers rdx */
+ rep stosq
+ movl %r8d,%ecx
+ rep stosb
+ movq %r9,%rax
+ ret
+ CFI_ENDPROC
+ENDPROC(memset_c)
+
+ENTRY(memset)
+ENTRY(__memset)
+ CFI_STARTPROC
+ movq %rdi,%r10
+ movq %rdx,%r11
+
+ /* expand byte value */
+ movzbl %sil,%ecx
+ movabs $0x0101010101010101,%rax
+ mul %rcx /* with rax, clobbers rdx */
+
+ /* align dst */
+ movl %edi,%r9d
+ andl $7,%r9d
+ jnz .Lbad_alignment
+ CFI_REMEMBER_STATE
+.Lafter_bad_alignment:
+
+ movl %r11d,%ecx
+ shrl $6,%ecx
+ jz .Lhandle_tail
+
+ .p2align 4
+.Lloop_64:
+ decl %ecx
+ movq %rax,(%rdi)
+ movq %rax,8(%rdi)
+ movq %rax,16(%rdi)
+ movq %rax,24(%rdi)
+ movq %rax,32(%rdi)
+ movq %rax,40(%rdi)
+ movq %rax,48(%rdi)
+ movq %rax,56(%rdi)
+ leaq 64(%rdi),%rdi
+ jnz .Lloop_64
+
+ /* Handle tail in loops. The loops should be faster than hard
+ to predict jump tables. */
+ .p2align 4
+.Lhandle_tail:
+ movl %r11d,%ecx
+ andl $63&(~7),%ecx
+ jz .Lhandle_7
+ shrl $3,%ecx
+ .p2align 4
+.Lloop_8:
+ decl %ecx
+ movq %rax,(%rdi)
+ leaq 8(%rdi),%rdi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ movl %r11d,%ecx
+ andl $7,%ecx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+ decl %ecx
+ movb %al,(%rdi)
+ leaq 1(%rdi),%rdi
+ jnz .Lloop_1
+
+.Lende:
+ movq %r10,%rax
+ ret
+
+ CFI_RESTORE_STATE
+.Lbad_alignment:
+ cmpq $7,%r11
+ jbe .Lhandle_7
+ movq %rax,(%rdi) /* unaligned store */
+ movq $8,%r8
+ subq %r9,%r8
+ addq %r8,%rdi
+ subq %r8,%r11
+ jmp .Lafter_bad_alignment
+.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memset)
+ENDPROC(__memset)
+
+ /* Some CPUs run faster using the string instructions.
+ It is also a lot simpler. Use this when possible */
+
+#include <asm/cpufeature.h>
+
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memset_c - memset) - (2f - 1b) /* offset */
+2:
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad memset
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal - memset
+ .byte 2b - 1b
+ .previous
--- /dev/null
+/*
+ * __put_user functions.
+ *
+ * (C) Copyright 1998 Linus Torvalds
+ * (C) Copyright 2005 Andi Kleen
+ *
+ * These functions have a non-standard call interface
+ * to make them more efficient, especially as they
+ * return an error value in addition to the "real"
+ * return value.
+ */
+
+/*
+ * __put_user_X
+ *
+ * Inputs: %rcx contains the address
+ * %rdx contains new value
+ *
+ * Outputs: %rax is error code (0 or -EFAULT)
+ *
+ * %r8 is destroyed.
+ *
+ * These functions should not modify any other registers,
+ * as they get called from within inline assembly.
+ */
+
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/page.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+ .text
+ENTRY(__put_user_1)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae bad_put_user
+1: movb %dl,(%rcx)
+ xorl %eax,%eax
+ ret
+ CFI_ENDPROC
+ENDPROC(__put_user_1)
+
+ENTRY(__put_user_2)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $1,%rcx
+ jc 20f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 20f
+ decq %rcx
+2: movw %dx,(%rcx)
+ xorl %eax,%eax
+ ret
+20: decq %rcx
+ jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_2)
+
+ENTRY(__put_user_4)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $3,%rcx
+ jc 30f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 30f
+ subq $3,%rcx
+3: movl %edx,(%rcx)
+ xorl %eax,%eax
+ ret
+30: subq $3,%rcx
+ jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_4)
+
+ENTRY(__put_user_8)
+ CFI_STARTPROC
+ GET_THREAD_INFO(%r8)
+ addq $7,%rcx
+ jc 40f
+ cmpq threadinfo_addr_limit(%r8),%rcx
+ jae 40f
+ subq $7,%rcx
+4: movq %rdx,(%rcx)
+ xorl %eax,%eax
+ ret
+40: subq $7,%rcx
+ jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_8)
+
+bad_put_user:
+ CFI_STARTPROC
+ movq $(-EFAULT),%rax
+ ret
+ CFI_ENDPROC
+END(bad_put_user)
+
+.section __ex_table,"a"
+ .quad 1b,bad_put_user
+ .quad 2b,bad_put_user
+ .quad 3b,bad_put_user
+ .quad 4b,bad_put_user
+.previous
--- /dev/null
+/* Slow paths of read/write spinlocks. */
+
+#include <linux/linkage.h>
+#include <asm/rwlock.h>
+#include <asm/alternative-asm.i>
+#include <asm/dwarf2.h>
+
+/* rdi: pointer to rwlock_t */
+ENTRY(__write_lock_failed)
+ CFI_STARTPROC
+ LOCK_PREFIX
+ addl $RW_LOCK_BIAS,(%rdi)
+1: rep
+ nop
+ cmpl $RW_LOCK_BIAS,(%rdi)
+ jne 1b
+ LOCK_PREFIX
+ subl $RW_LOCK_BIAS,(%rdi)
+ jnz __write_lock_failed
+ ret
+ CFI_ENDPROC
+END(__write_lock_failed)
+
+/* rdi: pointer to rwlock_t */
+ENTRY(__read_lock_failed)
+ CFI_STARTPROC
+ LOCK_PREFIX
+ incl (%rdi)
+1: rep
+ nop
+ cmpl $1,(%rdi)
+ js 1b
+ LOCK_PREFIX
+ decl (%rdi)
+ js __read_lock_failed
+ ret
+ CFI_ENDPROC
+END(__read_lock_failed)
--- /dev/null
+/*
+ * Save registers before calling assembly functions. This avoids
+ * disturbance of register allocation in some inline assembly constructs.
+ * Copyright 2001,2002 by Andi Kleen, SuSE Labs.
+ * Subject to the GNU public license, v.2. No warranty of any kind.
+ */
+
+ #include <linux/linkage.h>
+ #include <asm/dwarf2.h>
+ #include <asm/calling.h>
+ #include <asm/rwlock.h>
+
+ /* rdi: arg1 ... normal C conventions. rax is saved/restored. */
+ .macro thunk name,func
+ .globl \name
+\name:
+ CFI_STARTPROC
+ SAVE_ARGS
+ call \func
+ jmp restore
+ CFI_ENDPROC
+ .endm
+
+ /* rdi: arg1 ... normal C conventions. rax is passed from C. */
+ .macro thunk_retrax name,func
+ .globl \name
+\name:
+ CFI_STARTPROC
+ SAVE_ARGS
+ call \func
+ jmp restore_norax
+ CFI_ENDPROC
+ .endm
+
+
+ .section .sched.text
+#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM
+ thunk rwsem_down_read_failed_thunk,rwsem_down_read_failed
+ thunk rwsem_down_write_failed_thunk,rwsem_down_write_failed
+ thunk rwsem_wake_thunk,rwsem_wake
+ thunk rwsem_downgrade_thunk,rwsem_downgrade_wake
+#endif
+
+ thunk __down_failed,__down
+ thunk_retrax __down_failed_interruptible,__down_interruptible
+ thunk_retrax __down_failed_trylock,__down_trylock
+ thunk __up_wakeup,__up
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ thunk trace_hardirqs_on_thunk,trace_hardirqs_on
+ thunk trace_hardirqs_off_thunk,trace_hardirqs_off
+#endif
+
+ /* SAVE_ARGS below is used only for the .cfi directives it contains. */
+ CFI_STARTPROC
+ SAVE_ARGS
+restore:
+ RESTORE_ARGS
+ ret
+ CFI_ENDPROC
+
+ CFI_STARTPROC
+ SAVE_ARGS
+restore_norax:
+ RESTORE_ARGS 1
+ ret
+ CFI_ENDPROC
--- /dev/null
+/*
+ * User address space access functions.
+ *
+ * Copyright 1997 Andi Kleen <ak@muc.de>
+ * Copyright 1997 Linus Torvalds
+ * Copyright 2002 Andi Kleen <ak@suse.de>
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+#define __do_strncpy_from_user(dst,src,count,res) \
+do { \
+ long __d0, __d1, __d2; \
+ might_sleep(); \
+ __asm__ __volatile__( \
+ " testq %1,%1\n" \
+ " jz 2f\n" \
+ "0: lodsb\n" \
+ " stosb\n" \
+ " testb %%al,%%al\n" \
+ " jz 1f\n" \
+ " decq %1\n" \
+ " jnz 0b\n" \
+ "1: subq %1,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: movq %5,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 8\n" \
+ " .quad 0b,3b\n" \
+ ".previous" \
+ : "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
+ "=&D" (__d2) \
+ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
+ : "memory"); \
+} while (0)
+
+long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+EXPORT_SYMBOL(__strncpy_from_user);
+
+long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ return __strncpy_from_user(dst, src, count);
+ return res;
+}
+EXPORT_SYMBOL(strncpy_from_user);
+
+/*
+ * Zero Userspace
+ */
+
+unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+ long __d0;
+ might_sleep();
+ /* no memory constraint because it doesn't change any memory gcc knows
+ about */
+ asm volatile(
+ " testq %[size8],%[size8]\n"
+ " jz 4f\n"
+ "0: movq %[zero],(%[dst])\n"
+ " addq %[eight],%[dst]\n"
+ " decl %%ecx ; jnz 0b\n"
+ "4: movq %[size1],%%rcx\n"
+ " testl %%ecx,%%ecx\n"
+ " jz 2f\n"
+ "1: movb %b[zero],(%[dst])\n"
+ " incq %[dst]\n"
+ " decl %%ecx ; jnz 1b\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: lea 0(%[size1],%[size8],8),%[size8]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 0b,3b\n"
+ " .quad 1b,2b\n"
+ ".previous"
+ : [size8] "=c"(size), [dst] "=&D" (__d0)
+ : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
+ [zero] "r" (0UL), [eight] "r" (8UL));
+ return size;
+}
+EXPORT_SYMBOL(__clear_user);
+
+unsigned long clear_user(void __user *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ return __clear_user(to, n);
+ return n;
+}
+EXPORT_SYMBOL(clear_user);
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+
+long __strnlen_user(const char __user *s, long n)
+{
+ long res = 0;
+ char c;
+
+ while (1) {
+ if (res>n)
+ return n+1;
+ if (__get_user(c, s))
+ return 0;
+ if (!c)
+ return res+1;
+ res++;
+ s++;
+ }
+}
+EXPORT_SYMBOL(__strnlen_user);
+
+long strnlen_user(const char __user *s, long n)
+{
+ if (!access_ok(VERIFY_READ, s, n))
+ return 0;
+ return __strnlen_user(s, n);
+}
+EXPORT_SYMBOL(strnlen_user);
+
+long strlen_user(const char __user *s)
+{
+ long res = 0;
+ char c;
+
+ for (;;) {
+ if (get_user(c, s))
+ return 0;
+ if (!c)
+ return res+1;
+ res++;
+ s++;
+ }
+}
+EXPORT_SYMBOL(strlen_user);
+
+unsigned long copy_in_user(void __user *to, const void __user *from, unsigned len)
+{
+ if (access_ok(VERIFY_WRITE, to, len) && access_ok(VERIFY_READ, from, len)) {
+ return copy_user_generic((__force void *)to, (__force void *)from, len);
+ }
+ return len;
+}
+EXPORT_SYMBOL(copy_in_user);
+
head-y := arch/x86_64/kernel/head_64.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task_64.o
-libs-y += arch/x86_64/lib/
+libs-y += arch/x86/lib/
core-y += arch/x86_64/kernel/ \
arch/x86_64/mm/ \
arch/x86/crypto/ \
+++ /dev/null
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/lib/Makefile_32
-else
-include ${srctree}/arch/x86_64/lib/Makefile_64
-endif
+++ /dev/null
-#
-# Makefile for x86_64-specific library files.
-#
-
-CFLAGS_csum-partial_64.o := -funroll-loops
-
-obj-y := io_64.o iomap_copy_64.o
-obj-$(CONFIG_SMP) += msr-on-cpu.o
-
-lib-y := csum-partial_64.o csum-copy_64.o csum-wrappers_64.o delay_64.o \
- usercopy_64.o getuser_64.o putuser_64.o \
- thunk_64.o clear_page_64.o copy_page_64.o bitstr_64.o bitops_64.o
-lib-y += memcpy_64.o memmove_64.o memset_64.o copy_user_64.o rwlock_64.o copy_user_nocache_64.o
+++ /dev/null
-#include <linux/bitops.h>
-
-#undef find_first_zero_bit
-#undef find_next_zero_bit
-#undef find_first_bit
-#undef find_next_bit
-
-static inline long
-__find_first_zero_bit(const unsigned long * addr, unsigned long size)
-{
- long d0, d1, d2;
- long res;
-
- /*
- * We must test the size in words, not in bits, because
- * otherwise incoming sizes in the range -63..-1 will not run
- * any scasq instructions, and then the flags used by the je
- * instruction will have whatever random value was in place
- * before. Nobody should call us like that, but
- * find_next_zero_bit() does when offset and size are at the
- * same word and it fails to find a zero itself.
- */
- size += 63;
- size >>= 6;
- if (!size)
- return 0;
- asm volatile(
- " repe; scasq\n"
- " je 1f\n"
- " xorq -8(%%rdi),%%rax\n"
- " subq $8,%%rdi\n"
- " bsfq %%rax,%%rdx\n"
- "1: subq %[addr],%%rdi\n"
- " shlq $3,%%rdi\n"
- " addq %%rdi,%%rdx"
- :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
- :"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL),
- [addr] "S" (addr) : "memory");
- /*
- * Any register would do for [addr] above, but GCC tends to
- * prefer rbx over rsi, even though rsi is readily available
- * and doesn't have to be saved.
- */
- return res;
-}
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-long find_first_zero_bit(const unsigned long * addr, unsigned long size)
-{
- return __find_first_zero_bit (addr, size);
-}
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-long find_next_zero_bit (const unsigned long * addr, long size, long offset)
-{
- const unsigned long * p = addr + (offset >> 6);
- unsigned long set = 0;
- unsigned long res, bit = offset&63;
-
- if (bit) {
- /*
- * Look for zero in first word
- */
- asm("bsfq %1,%0\n\t"
- "cmoveq %2,%0"
- : "=r" (set)
- : "r" (~(*p >> bit)), "r"(64L));
- if (set < (64 - bit))
- return set + offset;
- set = 64 - bit;
- p++;
- }
- /*
- * No zero yet, search remaining full words for a zero
- */
- res = __find_first_zero_bit (p, size - 64 * (p - addr));
-
- return (offset + set + res);
-}
-
-static inline long
-__find_first_bit(const unsigned long * addr, unsigned long size)
-{
- long d0, d1;
- long res;
-
- /*
- * We must test the size in words, not in bits, because
- * otherwise incoming sizes in the range -63..-1 will not run
- * any scasq instructions, and then the flags used by the jz
- * instruction will have whatever random value was in place
- * before. Nobody should call us like that, but
- * find_next_bit() does when offset and size are at the same
- * word and it fails to find a one itself.
- */
- size += 63;
- size >>= 6;
- if (!size)
- return 0;
- asm volatile(
- " repe; scasq\n"
- " jz 1f\n"
- " subq $8,%%rdi\n"
- " bsfq (%%rdi),%%rax\n"
- "1: subq %[addr],%%rdi\n"
- " shlq $3,%%rdi\n"
- " addq %%rdi,%%rax"
- :"=a" (res), "=&c" (d0), "=&D" (d1)
- :"0" (0ULL), "1" (size), "2" (addr),
- [addr] "r" (addr) : "memory");
- return res;
-}
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-long find_first_bit(const unsigned long * addr, unsigned long size)
-{
- return __find_first_bit(addr,size);
-}
-
-/**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-long find_next_bit(const unsigned long * addr, long size, long offset)
-{
- const unsigned long * p = addr + (offset >> 6);
- unsigned long set = 0, bit = offset & 63, res;
-
- if (bit) {
- /*
- * Look for nonzero in the first 64 bits:
- */
- asm("bsfq %1,%0\n\t"
- "cmoveq %2,%0\n\t"
- : "=r" (set)
- : "r" (*p >> bit), "r" (64L));
- if (set < (64 - bit))
- return set + offset;
- set = 64 - bit;
- p++;
- }
- /*
- * No set bit yet, search remaining full words for a bit
- */
- res = __find_first_bit (p, size - 64 * (p - addr));
- return (offset + set + res);
-}
-
-#include <linux/module.h>
-
-EXPORT_SYMBOL(find_next_bit);
-EXPORT_SYMBOL(find_first_bit);
-EXPORT_SYMBOL(find_first_zero_bit);
-EXPORT_SYMBOL(find_next_zero_bit);
+++ /dev/null
-#include <linux/module.h>
-#include <linux/bitops.h>
-
-/* Find string of zero bits in a bitmap */
-unsigned long
-find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len)
-{
- unsigned long n, end, i;
-
- again:
- n = find_next_zero_bit(bitmap, nbits, start);
- if (n == -1)
- return -1;
-
- /* could test bitsliced, but it's hardly worth it */
- end = n+len;
- if (end >= nbits)
- return -1;
- for (i = n+1; i < end; i++) {
- if (test_bit(i, bitmap)) {
- start = i+1;
- goto again;
- }
- }
- return n;
-}
-
-EXPORT_SYMBOL(find_next_zero_string);
+++ /dev/null
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-/*
- * Zero a page.
- * rdi page
- */
- ALIGN
-clear_page_c:
- CFI_STARTPROC
- movl $4096/8,%ecx
- xorl %eax,%eax
- rep stosq
- ret
- CFI_ENDPROC
-ENDPROC(clear_page)
-
-ENTRY(clear_page)
- CFI_STARTPROC
- xorl %eax,%eax
- movl $4096/64,%ecx
- .p2align 4
-.Lloop:
- decl %ecx
-#define PUT(x) movq %rax,x*8(%rdi)
- movq %rax,(%rdi)
- PUT(1)
- PUT(2)
- PUT(3)
- PUT(4)
- PUT(5)
- PUT(6)
- PUT(7)
- leaq 64(%rdi),%rdi
- jnz .Lloop
- nop
- ret
- CFI_ENDPROC
-.Lclear_page_end:
-ENDPROC(clear_page)
-
- /* Some CPUs run faster using the string instructions.
- It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
- .section .altinstr_replacement,"ax"
-1: .byte 0xeb /* jmp <disp8> */
- .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */
-2:
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad clear_page
- .quad 1b
- .byte X86_FEATURE_REP_GOOD
- .byte .Lclear_page_end - clear_page
- .byte 2b - 1b
- .previous
+++ /dev/null
-/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
- ALIGN
-copy_page_c:
- CFI_STARTPROC
- movl $4096/8,%ecx
- rep movsq
- ret
- CFI_ENDPROC
-ENDPROC(copy_page_c)
-
-/* Don't use streaming store because it's better when the target
- ends up in cache. */
-
-/* Could vary the prefetch distance based on SMP/UP */
-
-ENTRY(copy_page)
- CFI_STARTPROC
- subq $3*8,%rsp
- CFI_ADJUST_CFA_OFFSET 3*8
- movq %rbx,(%rsp)
- CFI_REL_OFFSET rbx, 0
- movq %r12,1*8(%rsp)
- CFI_REL_OFFSET r12, 1*8
- movq %r13,2*8(%rsp)
- CFI_REL_OFFSET r13, 2*8
-
- movl $(4096/64)-5,%ecx
- .p2align 4
-.Loop64:
- dec %rcx
-
- movq (%rsi), %rax
- movq 8 (%rsi), %rbx
- movq 16 (%rsi), %rdx
- movq 24 (%rsi), %r8
- movq 32 (%rsi), %r9
- movq 40 (%rsi), %r10
- movq 48 (%rsi), %r11
- movq 56 (%rsi), %r12
-
- prefetcht0 5*64(%rsi)
-
- movq %rax, (%rdi)
- movq %rbx, 8 (%rdi)
- movq %rdx, 16 (%rdi)
- movq %r8, 24 (%rdi)
- movq %r9, 32 (%rdi)
- movq %r10, 40 (%rdi)
- movq %r11, 48 (%rdi)
- movq %r12, 56 (%rdi)
-
- leaq 64 (%rsi), %rsi
- leaq 64 (%rdi), %rdi
-
- jnz .Loop64
-
- movl $5,%ecx
- .p2align 4
-.Loop2:
- decl %ecx
-
- movq (%rsi), %rax
- movq 8 (%rsi), %rbx
- movq 16 (%rsi), %rdx
- movq 24 (%rsi), %r8
- movq 32 (%rsi), %r9
- movq 40 (%rsi), %r10
- movq 48 (%rsi), %r11
- movq 56 (%rsi), %r12
-
- movq %rax, (%rdi)
- movq %rbx, 8 (%rdi)
- movq %rdx, 16 (%rdi)
- movq %r8, 24 (%rdi)
- movq %r9, 32 (%rdi)
- movq %r10, 40 (%rdi)
- movq %r11, 48 (%rdi)
- movq %r12, 56 (%rdi)
-
- leaq 64(%rdi),%rdi
- leaq 64(%rsi),%rsi
-
- jnz .Loop2
-
- movq (%rsp),%rbx
- CFI_RESTORE rbx
- movq 1*8(%rsp),%r12
- CFI_RESTORE r12
- movq 2*8(%rsp),%r13
- CFI_RESTORE r13
- addq $3*8,%rsp
- CFI_ADJUST_CFA_OFFSET -3*8
- ret
-.Lcopy_page_end:
- CFI_ENDPROC
-ENDPROC(copy_page)
-
- /* Some CPUs run faster using the string copy instructions.
- It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
- .section .altinstr_replacement,"ax"
-1: .byte 0xeb /* jmp <disp8> */
- .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */
-2:
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad copy_page
- .quad 1b
- .byte X86_FEATURE_REP_GOOD
- .byte .Lcopy_page_end - copy_page
- .byte 2b - 1b
- .previous
+++ /dev/null
-/* Copyright 2002 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License v2.
- *
- * Functions to copy from and to user space.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-#define FIX_ALIGNMENT 1
-
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/cpufeature.h>
-
- .macro ALTERNATIVE_JUMP feature,orig,alt
-0:
- .byte 0xe9 /* 32bit jump */
- .long \orig-1f /* by default jump to orig */
-1:
- .section .altinstr_replacement,"ax"
-2: .byte 0xe9 /* near jump with 32bit immediate */
- .long \alt-1b /* offset */ /* or alternatively to alt */
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad 0b
- .quad 2b
- .byte \feature /* when feature is set */
- .byte 5
- .byte 5
- .previous
- .endm
-
-/* Standard copy_to_user with segment limit checking */
-ENTRY(copy_to_user)
- CFI_STARTPROC
- GET_THREAD_INFO(%rax)
- movq %rdi,%rcx
- addq %rdx,%rcx
- jc bad_to_user
- cmpq threadinfo_addr_limit(%rax),%rcx
- jae bad_to_user
- xorl %eax,%eax /* clear zero flag */
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
- CFI_ENDPROC
-
-ENTRY(copy_user_generic)
- CFI_STARTPROC
- movl $1,%ecx /* set zero flag */
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
- CFI_ENDPROC
-
-ENTRY(__copy_from_user_inatomic)
- CFI_STARTPROC
- xorl %ecx,%ecx /* clear zero flag */
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
- CFI_ENDPROC
-
-/* Standard copy_from_user with segment limit checking */
-ENTRY(copy_from_user)
- CFI_STARTPROC
- GET_THREAD_INFO(%rax)
- movq %rsi,%rcx
- addq %rdx,%rcx
- jc bad_from_user
- cmpq threadinfo_addr_limit(%rax),%rcx
- jae bad_from_user
- movl $1,%ecx /* set zero flag */
- ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
- CFI_ENDPROC
-ENDPROC(copy_from_user)
-
- .section .fixup,"ax"
- /* must zero dest */
-bad_from_user:
- CFI_STARTPROC
- movl %edx,%ecx
- xorl %eax,%eax
- rep
- stosb
-bad_to_user:
- movl %edx,%eax
- ret
- CFI_ENDPROC
-END(bad_from_user)
- .previous
-
-
-/*
- * copy_user_generic_unrolled - memory copy with exception handling.
- * This version is for CPUs like P4 that don't have efficient micro code for rep movsq
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
- * ecx zero flag -- if true zero destination on error
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-ENTRY(copy_user_generic_unrolled)
- CFI_STARTPROC
- pushq %rbx
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rbx, 0
- pushq %rcx
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rcx, 0
- xorl %eax,%eax /*zero for the exception handler */
-
-#ifdef FIX_ALIGNMENT
- /* check for bad alignment of destination */
- movl %edi,%ecx
- andl $7,%ecx
- jnz .Lbad_alignment
-.Lafter_bad_alignment:
-#endif
-
- movq %rdx,%rcx
-
- movl $64,%ebx
- shrq $6,%rdx
- decq %rdx
- js .Lhandle_tail
-
- .p2align 4
-.Lloop:
-.Ls1: movq (%rsi),%r11
-.Ls2: movq 1*8(%rsi),%r8
-.Ls3: movq 2*8(%rsi),%r9
-.Ls4: movq 3*8(%rsi),%r10
-.Ld1: movq %r11,(%rdi)
-.Ld2: movq %r8,1*8(%rdi)
-.Ld3: movq %r9,2*8(%rdi)
-.Ld4: movq %r10,3*8(%rdi)
-
-.Ls5: movq 4*8(%rsi),%r11
-.Ls6: movq 5*8(%rsi),%r8
-.Ls7: movq 6*8(%rsi),%r9
-.Ls8: movq 7*8(%rsi),%r10
-.Ld5: movq %r11,4*8(%rdi)
-.Ld6: movq %r8,5*8(%rdi)
-.Ld7: movq %r9,6*8(%rdi)
-.Ld8: movq %r10,7*8(%rdi)
-
- decq %rdx
-
- leaq 64(%rsi),%rsi
- leaq 64(%rdi),%rdi
-
- jns .Lloop
-
- .p2align 4
-.Lhandle_tail:
- movl %ecx,%edx
- andl $63,%ecx
- shrl $3,%ecx
- jz .Lhandle_7
- movl $8,%ebx
- .p2align 4
-.Lloop_8:
-.Ls9: movq (%rsi),%r8
-.Ld9: movq %r8,(%rdi)
- decl %ecx
- leaq 8(%rdi),%rdi
- leaq 8(%rsi),%rsi
- jnz .Lloop_8
-
-.Lhandle_7:
- movl %edx,%ecx
- andl $7,%ecx
- jz .Lende
- .p2align 4
-.Lloop_1:
-.Ls10: movb (%rsi),%bl
-.Ld10: movb %bl,(%rdi)
- incq %rdi
- incq %rsi
- decl %ecx
- jnz .Lloop_1
-
- CFI_REMEMBER_STATE
-.Lende:
- popq %rcx
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE rcx
- popq %rbx
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE rbx
- ret
- CFI_RESTORE_STATE
-
-#ifdef FIX_ALIGNMENT
- /* align destination */
- .p2align 4
-.Lbad_alignment:
- movl $8,%r9d
- subl %ecx,%r9d
- movl %r9d,%ecx
- cmpq %r9,%rdx
- jz .Lhandle_7
- js .Lhandle_7
-.Lalign_1:
-.Ls11: movb (%rsi),%bl
-.Ld11: movb %bl,(%rdi)
- incq %rsi
- incq %rdi
- decl %ecx
- jnz .Lalign_1
- subq %r9,%rdx
- jmp .Lafter_bad_alignment
-#endif
-
- /* table sorted by exception address */
- .section __ex_table,"a"
- .align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
- .quad .Ld2,.Ls2e
- .quad .Ld3,.Ls3e
- .quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
- .quad .Ld6,.Ls6e
- .quad .Ld7,.Ls7e
- .quad .Ld8,.Ls8e
- .quad .Ls9,.Le_quad
- .quad .Ld9,.Le_quad
- .quad .Ls10,.Le_byte
- .quad .Ld10,.Le_byte
-#ifdef FIX_ALIGNMENT
- .quad .Ls11,.Lzero_rest
- .quad .Ld11,.Lzero_rest
-#endif
- .quad .Le5,.Le_zero
- .previous
-
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
- /* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
-.Ls2e: addl $8,%eax
-.Ls3e: addl $8,%eax
-.Ls4e: addl $8,%eax
-.Ls5e: addl $8,%eax
-.Ls6e: addl $8,%eax
-.Ls7e: addl $8,%eax
-.Ls8e: addl $8,%eax
- addq %rbx,%rdi /* +64 */
- subq %rax,%rdi /* correct destination with computed offset */
-
- shlq $6,%rdx /* loop counter * 64 (stride length) */
- addq %rax,%rdx /* add offset to loopcnt */
- andl $63,%ecx /* remaining bytes */
- addq %rcx,%rdx /* add them */
- jmp .Lzero_rest
-
- /* exception on quad word loop in tail handling */
- /* ecx: loopcnt/8, %edx: length, rdi: correct */
-.Le_quad:
- shll $3,%ecx
- andl $7,%edx
- addl %ecx,%edx
- /* edx: bytes to zero, rdi: dest, eax:zero */
-.Lzero_rest:
- cmpl $0,(%rsp)
- jz .Le_zero
- movq %rdx,%rcx
-.Le_byte:
- xorl %eax,%eax
-.Le5: rep
- stosb
- /* when there is another exception while zeroing the rest just return */
-.Le_zero:
- movq %rdx,%rax
- jmp .Lende
- CFI_ENDPROC
-ENDPROC(copy_user_generic)
-
-
- /* Some CPUs run faster using the string copy instructions.
- This is also a lot simpler. Use them when possible.
- Patch in jmps to this code instead of copying it fully
- to avoid unwanted aliasing in the exception tables. */
-
- /* rdi destination
- * rsi source
- * rdx count
- * ecx zero flag
- *
- * Output:
- * eax uncopied bytes or 0 if successfull.
- *
- * Only 4GB of copy is supported. This shouldn't be a problem
- * because the kernel normally only writes from/to page sized chunks
- * even if user space passed a longer buffer.
- * And more would be dangerous because both Intel and AMD have
- * errata with rep movsq > 4GB. If someone feels the need to fix
- * this please consider this.
- */
-ENTRY(copy_user_generic_string)
- CFI_STARTPROC
- movl %ecx,%r8d /* save zero flag */
- movl %edx,%ecx
- shrl $3,%ecx
- andl $7,%edx
- jz 10f
-1: rep
- movsq
- movl %edx,%ecx
-2: rep
- movsb
-9: movl %ecx,%eax
- ret
-
- /* multiple of 8 byte */
-10: rep
- movsq
- xor %eax,%eax
- ret
-
- /* exception handling */
-3: lea (%rdx,%rcx,8),%rax /* exception on quad loop */
- jmp 6f
-5: movl %ecx,%eax /* exception on byte loop */
- /* eax: left over bytes */
-6: testl %r8d,%r8d /* zero flag set? */
- jz 7f
- movl %eax,%ecx /* initialize x86 loop counter */
- push %rax
- xorl %eax,%eax
-8: rep
- stosb /* zero the rest */
-11: pop %rax
-7: ret
- CFI_ENDPROC
-END(copy_user_generic_c)
-
- .section __ex_table,"a"
- .quad 1b,3b
- .quad 2b,5b
- .quad 8b,11b
- .quad 10b,3b
- .previous
+++ /dev/null
-/* Copyright 2002 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License v2.
- *
- * Functions to copy from and to user space.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-#define FIX_ALIGNMENT 1
-
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/cpufeature.h>
-
-/*
- * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination/source out of cache for more performance.
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
- * rcx zero flag when 1 zero on exception
- *
- * Output:
- * eax uncopied bytes or 0 if successful.
- */
-ENTRY(__copy_user_nocache)
- CFI_STARTPROC
- pushq %rbx
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rbx, 0
- pushq %rcx /* save zero flag */
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rcx, 0
-
- xorl %eax,%eax /* zero for the exception handler */
-
-#ifdef FIX_ALIGNMENT
- /* check for bad alignment of destination */
- movl %edi,%ecx
- andl $7,%ecx
- jnz .Lbad_alignment
-.Lafter_bad_alignment:
-#endif
-
- movq %rdx,%rcx
-
- movl $64,%ebx
- shrq $6,%rdx
- decq %rdx
- js .Lhandle_tail
-
- .p2align 4
-.Lloop:
-.Ls1: movq (%rsi),%r11
-.Ls2: movq 1*8(%rsi),%r8
-.Ls3: movq 2*8(%rsi),%r9
-.Ls4: movq 3*8(%rsi),%r10
-.Ld1: movnti %r11,(%rdi)
-.Ld2: movnti %r8,1*8(%rdi)
-.Ld3: movnti %r9,2*8(%rdi)
-.Ld4: movnti %r10,3*8(%rdi)
-
-.Ls5: movq 4*8(%rsi),%r11
-.Ls6: movq 5*8(%rsi),%r8
-.Ls7: movq 6*8(%rsi),%r9
-.Ls8: movq 7*8(%rsi),%r10
-.Ld5: movnti %r11,4*8(%rdi)
-.Ld6: movnti %r8,5*8(%rdi)
-.Ld7: movnti %r9,6*8(%rdi)
-.Ld8: movnti %r10,7*8(%rdi)
-
- dec %rdx
-
- leaq 64(%rsi),%rsi
- leaq 64(%rdi),%rdi
-
- jns .Lloop
-
- .p2align 4
-.Lhandle_tail:
- movl %ecx,%edx
- andl $63,%ecx
- shrl $3,%ecx
- jz .Lhandle_7
- movl $8,%ebx
- .p2align 4
-.Lloop_8:
-.Ls9: movq (%rsi),%r8
-.Ld9: movnti %r8,(%rdi)
- decl %ecx
- leaq 8(%rdi),%rdi
- leaq 8(%rsi),%rsi
- jnz .Lloop_8
-
-.Lhandle_7:
- movl %edx,%ecx
- andl $7,%ecx
- jz .Lende
- .p2align 4
-.Lloop_1:
-.Ls10: movb (%rsi),%bl
-.Ld10: movb %bl,(%rdi)
- incq %rdi
- incq %rsi
- decl %ecx
- jnz .Lloop_1
-
- CFI_REMEMBER_STATE
-.Lende:
- popq %rcx
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE %rcx
- popq %rbx
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE rbx
- ret
- CFI_RESTORE_STATE
-
-#ifdef FIX_ALIGNMENT
- /* align destination */
- .p2align 4
-.Lbad_alignment:
- movl $8,%r9d
- subl %ecx,%r9d
- movl %r9d,%ecx
- cmpq %r9,%rdx
- jz .Lhandle_7
- js .Lhandle_7
-.Lalign_1:
-.Ls11: movb (%rsi),%bl
-.Ld11: movb %bl,(%rdi)
- incq %rsi
- incq %rdi
- decl %ecx
- jnz .Lalign_1
- subq %r9,%rdx
- jmp .Lafter_bad_alignment
-#endif
-
- /* table sorted by exception address */
- .section __ex_table,"a"
- .align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
- .quad .Ld2,.Ls2e
- .quad .Ld3,.Ls3e
- .quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
- .quad .Ld6,.Ls6e
- .quad .Ld7,.Ls7e
- .quad .Ld8,.Ls8e
- .quad .Ls9,.Le_quad
- .quad .Ld9,.Le_quad
- .quad .Ls10,.Le_byte
- .quad .Ld10,.Le_byte
-#ifdef FIX_ALIGNMENT
- .quad .Ls11,.Lzero_rest
- .quad .Ld11,.Lzero_rest
-#endif
- .quad .Le5,.Le_zero
- .previous
-
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
- /* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
-.Ls2e: addl $8,%eax
-.Ls3e: addl $8,%eax
-.Ls4e: addl $8,%eax
-.Ls5e: addl $8,%eax
-.Ls6e: addl $8,%eax
-.Ls7e: addl $8,%eax
-.Ls8e: addl $8,%eax
- addq %rbx,%rdi /* +64 */
- subq %rax,%rdi /* correct destination with computed offset */
-
- shlq $6,%rdx /* loop counter * 64 (stride length) */
- addq %rax,%rdx /* add offset to loopcnt */
- andl $63,%ecx /* remaining bytes */
- addq %rcx,%rdx /* add them */
- jmp .Lzero_rest
-
- /* exception on quad word loop in tail handling */
- /* ecx: loopcnt/8, %edx: length, rdi: correct */
-.Le_quad:
- shll $3,%ecx
- andl $7,%edx
- addl %ecx,%edx
- /* edx: bytes to zero, rdi: dest, eax:zero */
-.Lzero_rest:
- cmpl $0,(%rsp) /* zero flag set? */
- jz .Le_zero
- movq %rdx,%rcx
-.Le_byte:
- xorl %eax,%eax
-.Le5: rep
- stosb
- /* when there is another exception while zeroing the rest just return */
-.Le_zero:
- movq %rdx,%rax
- jmp .Lende
- CFI_ENDPROC
-ENDPROC(__copy_user_nocache)
-
-
+++ /dev/null
-/*
- * Copyright 2002,2003 Andi Kleen, SuSE Labs.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details. No warranty for anything given at all.
- */
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/errno.h>
-
-/*
- * Checksum copy with exception handling.
- * On exceptions src_err_ptr or dst_err_ptr is set to -EFAULT and the
- * destination is zeroed.
- *
- * Input
- * rdi source
- * rsi destination
- * edx len (32bit)
- * ecx sum (32bit)
- * r8 src_err_ptr (int)
- * r9 dst_err_ptr (int)
- *
- * Output
- * eax 64bit sum. undefined in case of exception.
- *
- * Wrappers need to take care of valid exception sum and zeroing.
- * They also should align source or destination to 8 bytes.
- */
-
- .macro source
-10:
- .section __ex_table,"a"
- .align 8
- .quad 10b,.Lbad_source
- .previous
- .endm
-
- .macro dest
-20:
- .section __ex_table,"a"
- .align 8
- .quad 20b,.Lbad_dest
- .previous
- .endm
-
- .macro ignore L=.Lignore
-30:
- .section __ex_table,"a"
- .align 8
- .quad 30b,\L
- .previous
- .endm
-
-
-ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
- cmpl $3*64,%edx
- jle .Lignore
-
-.Lignore:
- subq $7*8,%rsp
- CFI_ADJUST_CFA_OFFSET 7*8
- movq %rbx,2*8(%rsp)
- CFI_REL_OFFSET rbx, 2*8
- movq %r12,3*8(%rsp)
- CFI_REL_OFFSET r12, 3*8
- movq %r14,4*8(%rsp)
- CFI_REL_OFFSET r14, 4*8
- movq %r13,5*8(%rsp)
- CFI_REL_OFFSET r13, 5*8
- movq %rbp,6*8(%rsp)
- CFI_REL_OFFSET rbp, 6*8
-
- movq %r8,(%rsp)
- movq %r9,1*8(%rsp)
-
- movl %ecx,%eax
- movl %edx,%ecx
-
- xorl %r9d,%r9d
- movq %rcx,%r12
-
- shrq $6,%r12
- jz .Lhandle_tail /* < 64 */
-
- clc
-
- /* main loop. clear in 64 byte blocks */
- /* r9: zero, r8: temp2, rbx: temp1, rax: sum, rcx: saved length */
- /* r11: temp3, rdx: temp4, r12 loopcnt */
- /* r10: temp5, rbp: temp6, r14 temp7, r13 temp8 */
- .p2align 4
-.Lloop:
- source
- movq (%rdi),%rbx
- source
- movq 8(%rdi),%r8
- source
- movq 16(%rdi),%r11
- source
- movq 24(%rdi),%rdx
-
- source
- movq 32(%rdi),%r10
- source
- movq 40(%rdi),%rbp
- source
- movq 48(%rdi),%r14
- source
- movq 56(%rdi),%r13
-
- ignore 2f
- prefetcht0 5*64(%rdi)
-2:
- adcq %rbx,%rax
- adcq %r8,%rax
- adcq %r11,%rax
- adcq %rdx,%rax
- adcq %r10,%rax
- adcq %rbp,%rax
- adcq %r14,%rax
- adcq %r13,%rax
-
- decl %r12d
-
- dest
- movq %rbx,(%rsi)
- dest
- movq %r8,8(%rsi)
- dest
- movq %r11,16(%rsi)
- dest
- movq %rdx,24(%rsi)
-
- dest
- movq %r10,32(%rsi)
- dest
- movq %rbp,40(%rsi)
- dest
- movq %r14,48(%rsi)
- dest
- movq %r13,56(%rsi)
-
-3:
-
- leaq 64(%rdi),%rdi
- leaq 64(%rsi),%rsi
-
- jnz .Lloop
-
- adcq %r9,%rax
-
- /* do last upto 56 bytes */
-.Lhandle_tail:
- /* ecx: count */
- movl %ecx,%r10d
- andl $63,%ecx
- shrl $3,%ecx
- jz .Lfold
- clc
- .p2align 4
-.Lloop_8:
- source
- movq (%rdi),%rbx
- adcq %rbx,%rax
- decl %ecx
- dest
- movq %rbx,(%rsi)
- leaq 8(%rsi),%rsi /* preserve carry */
- leaq 8(%rdi),%rdi
- jnz .Lloop_8
- adcq %r9,%rax /* add in carry */
-
-.Lfold:
- /* reduce checksum to 32bits */
- movl %eax,%ebx
- shrq $32,%rax
- addl %ebx,%eax
- adcl %r9d,%eax
-
- /* do last upto 6 bytes */
-.Lhandle_7:
- movl %r10d,%ecx
- andl $7,%ecx
- shrl $1,%ecx
- jz .Lhandle_1
- movl $2,%edx
- xorl %ebx,%ebx
- clc
- .p2align 4
-.Lloop_1:
- source
- movw (%rdi),%bx
- adcl %ebx,%eax
- decl %ecx
- dest
- movw %bx,(%rsi)
- leaq 2(%rdi),%rdi
- leaq 2(%rsi),%rsi
- jnz .Lloop_1
- adcl %r9d,%eax /* add in carry */
-
- /* handle last odd byte */
-.Lhandle_1:
- testl $1,%r10d
- jz .Lende
- xorl %ebx,%ebx
- source
- movb (%rdi),%bl
- dest
- movb %bl,(%rsi)
- addl %ebx,%eax
- adcl %r9d,%eax /* carry */
-
- CFI_REMEMBER_STATE
-.Lende:
- movq 2*8(%rsp),%rbx
- CFI_RESTORE rbx
- movq 3*8(%rsp),%r12
- CFI_RESTORE r12
- movq 4*8(%rsp),%r14
- CFI_RESTORE r14
- movq 5*8(%rsp),%r13
- CFI_RESTORE r13
- movq 6*8(%rsp),%rbp
- CFI_RESTORE rbp
- addq $7*8,%rsp
- CFI_ADJUST_CFA_OFFSET -7*8
- ret
- CFI_RESTORE_STATE
-
- /* Exception handlers. Very simple, zeroing is done in the wrappers */
-.Lbad_source:
- movq (%rsp),%rax
- testq %rax,%rax
- jz .Lende
- movl $-EFAULT,(%rax)
- jmp .Lende
-
-.Lbad_dest:
- movq 8(%rsp),%rax
- testq %rax,%rax
- jz .Lende
- movl $-EFAULT,(%rax)
- jmp .Lende
- CFI_ENDPROC
-ENDPROC(csum_partial_copy_generic)
+++ /dev/null
-/*
- * arch/x86_64/lib/csum-partial.c
- *
- * This file contains network checksum routines that are better done
- * in an architecture-specific manner due to speed.
- */
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <asm/checksum.h>
-
-static inline unsigned short from32to16(unsigned a)
-{
- unsigned short b = a >> 16;
- asm("addw %w2,%w0\n\t"
- "adcw $0,%w0\n"
- : "=r" (b)
- : "0" (b), "r" (a));
- return b;
-}
-
-/*
- * Do a 64-bit checksum on an arbitrary memory area.
- * Returns a 32bit checksum.
- *
- * This isn't as time critical as it used to be because many NICs
- * do hardware checksumming these days.
- *
- * Things tried and found to not make it faster:
- * Manual Prefetching
- * Unrolling to an 128 bytes inner loop.
- * Using interleaving with more registers to break the carry chains.
- */
-static unsigned do_csum(const unsigned char *buff, unsigned len)
-{
- unsigned odd, count;
- unsigned long result = 0;
-
- if (unlikely(len == 0))
- return result;
- odd = 1 & (unsigned long) buff;
- if (unlikely(odd)) {
- result = *buff << 8;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *)buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long zero;
- unsigned count64;
- if (4 & (unsigned long) buff) {
- result += *(unsigned int *) buff;
- count--;
- len -= 4;
- buff += 4;
- }
- count >>= 1; /* nr of 64-bit words.. */
-
- /* main loop using 64byte blocks */
- zero = 0;
- count64 = count >> 3;
- while (count64) {
- asm("addq 0*8(%[src]),%[res]\n\t"
- "adcq 1*8(%[src]),%[res]\n\t"
- "adcq 2*8(%[src]),%[res]\n\t"
- "adcq 3*8(%[src]),%[res]\n\t"
- "adcq 4*8(%[src]),%[res]\n\t"
- "adcq 5*8(%[src]),%[res]\n\t"
- "adcq 6*8(%[src]),%[res]\n\t"
- "adcq 7*8(%[src]),%[res]\n\t"
- "adcq %[zero],%[res]"
- : [res] "=r" (result)
- : [src] "r" (buff), [zero] "r" (zero),
- "[res]" (result));
- buff += 64;
- count64--;
- }
-
- /* last upto 7 8byte blocks */
- count %= 8;
- while (count) {
- asm("addq %1,%0\n\t"
- "adcq %2,%0\n"
- : "=r" (result)
- : "m" (*(unsigned long *)buff),
- "r" (zero), "0" (result));
- --count;
- buff += 8;
- }
- result = add32_with_carry(result>>32,
- result&0xffffffff);
-
- if (len & 4) {
- result += *(unsigned int *) buff;
- buff += 4;
- }
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += *buff;
- result = add32_with_carry(result>>32, result & 0xffffffff);
- if (unlikely(odd)) {
- result = from32to16(result);
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
- }
- return result;
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 64-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- return (__force __wsum)add32_with_carry(do_csum(buff, len),
- (__force u32)sum);
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold(csum_partial(buff,len,0));
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
+++ /dev/null
-/* Copyright 2002,2003 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License v.2
- *
- * Wrappers of assembly checksum functions for x86-64.
- */
-
-#include <asm/checksum.h>
-#include <linux/module.h>
-
-/**
- * csum_partial_copy_from_user - Copy and checksum from user space.
- * @src: source address (user space)
- * @dst: destination address
- * @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
- * @errp: set to -EFAULT for an bad source address.
- *
- * Returns an 32bit unfolded checksum of the buffer.
- * src and dst are best aligned to 64bits.
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum isum, int *errp)
-{
- might_sleep();
- *errp = 0;
- if (likely(access_ok(VERIFY_READ,src, len))) {
- /* Why 6, not 7? To handle odd addresses aligned we
- would need to do considerable complications to fix the
- checksum which is defined as an 16bit accumulator. The
- fix alignment code is primarily for performance
- compatibility with 32bit and that will handle odd
- addresses slowly too. */
- if (unlikely((unsigned long)src & 6)) {
- while (((unsigned long)src & 6) && len >= 2) {
- __u16 val16;
- *errp = __get_user(val16, (const __u16 __user *)src);
- if (*errp)
- return isum;
- *(__u16 *)dst = val16;
- isum = (__force __wsum)add32_with_carry(
- (__force unsigned)isum, val16);
- src += 2;
- dst += 2;
- len -= 2;
- }
- }
- isum = csum_partial_copy_generic((__force const void *)src,
- dst, len, isum, errp, NULL);
- if (likely(*errp == 0))
- return isum;
- }
- *errp = -EFAULT;
- memset(dst,0,len);
- return isum;
-}
-
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/**
- * csum_partial_copy_to_user - Copy and checksum to user space.
- * @src: source address
- * @dst: destination address (user space)
- * @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
- * @errp: set to -EFAULT for an bad destination address.
- *
- * Returns an 32bit unfolded checksum of the buffer.
- * src and dst are best aligned to 64bits.
- */
-__wsum
-csum_partial_copy_to_user(const void *src, void __user *dst,
- int len, __wsum isum, int *errp)
-{
- might_sleep();
- if (unlikely(!access_ok(VERIFY_WRITE, dst, len))) {
- *errp = -EFAULT;
- return 0;
- }
-
- if (unlikely((unsigned long)dst & 6)) {
- while (((unsigned long)dst & 6) && len >= 2) {
- __u16 val16 = *(__u16 *)src;
- isum = (__force __wsum)add32_with_carry(
- (__force unsigned)isum, val16);
- *errp = __put_user(val16, (__u16 __user *)dst);
- if (*errp)
- return isum;
- src += 2;
- dst += 2;
- len -= 2;
- }
- }
-
- *errp = 0;
- return csum_partial_copy_generic(src, (void __force *)dst,len,isum,NULL,errp);
-}
-
-EXPORT_SYMBOL(csum_partial_copy_to_user);
-
-/**
- * csum_partial_copy_nocheck - Copy and checksum.
- * @src: source address
- * @dst: destination address
- * @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
- *
- * Returns an 32bit unfolded checksum of the buffer.
- */
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
- return csum_partial_copy_generic(src,dst,len,sum,NULL,NULL);
-}
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- __u64 rest, sum64;
-
- rest = (__force __u64)htonl(len) + (__force __u64)htons(proto) +
- (__force __u64)sum;
- asm(" addq (%[saddr]),%[sum]\n"
- " adcq 8(%[saddr]),%[sum]\n"
- " adcq (%[daddr]),%[sum]\n"
- " adcq 8(%[daddr]),%[sum]\n"
- " adcq $0,%[sum]\n"
- : [sum] "=r" (sum64)
- : "[sum]" (rest),[saddr] "r" (saddr), [daddr] "r" (daddr));
- return csum_fold((__force __wsum)add32_with_carry(sum64 & 0xffffffff, sum64>>32));
-}
-
-EXPORT_SYMBOL(csum_ipv6_magic);
+++ /dev/null
-/*
- * Precise Delay Loops for x86-64
- *
- * Copyright (C) 1993 Linus Torvalds
- * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- * The __delay function must _NOT_ be inlined as its execution time
- * depends wildly on alignment on many x86 processors.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <asm/delay.h>
-#include <asm/msr.h>
-
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-int read_current_timer(unsigned long *timer_value)
-{
- rdtscll(*timer_value);
- return 0;
-}
-
-void __delay(unsigned long loops)
-{
- unsigned bclock, now;
-
- rdtscl(bclock);
- do
- {
- rep_nop();
- rdtscl(now);
- }
- while((now-bclock) < loops);
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
- __delay(((xloops * HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy) >> 32) + 1);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
+++ /dev/null
-/*
- * __get_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- * (C) Copyright 2005 Andi Kleen
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __get_user_X
- *
- * Inputs: %rcx contains the address.
- * The register is modified, but all changes are undone
- * before returning because the C code doesn't know about it.
- *
- * Outputs: %rax is error code (0 or -EFAULT)
- * %rdx contains zero-extended value
- *
- * %r8 is destroyed.
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/page.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
- .text
-ENTRY(__get_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae bad_get_user
-1: movzb (%rcx),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_1)
-
-ENTRY(__get_user_2)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movzwl (%rcx),%edx
- xorl %eax,%eax
- ret
-20: decq %rcx
- jmp bad_get_user
- CFI_ENDPROC
-ENDPROC(__get_user_2)
-
-ENTRY(__get_user_4)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl (%rcx),%edx
- xorl %eax,%eax
- ret
-30: subq $3,%rcx
- jmp bad_get_user
- CFI_ENDPROC
-ENDPROC(__get_user_4)
-
-ENTRY(__get_user_8)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq (%rcx),%rdx
- xorl %eax,%eax
- ret
-40: subq $7,%rcx
- jmp bad_get_user
- CFI_ENDPROC
-ENDPROC(__get_user_8)
-
-bad_get_user:
- CFI_STARTPROC
- xorl %edx,%edx
- movq $(-EFAULT),%rax
- ret
- CFI_ENDPROC
-END(bad_get_user)
-
-.section __ex_table,"a"
- .quad 1b,bad_get_user
- .quad 2b,bad_get_user
- .quad 3b,bad_get_user
- .quad 4b,bad_get_user
-.previous
+++ /dev/null
-#include <linux/string.h>
-#include <asm/io.h>
-#include <linux/module.h>
-
-void __memcpy_toio(unsigned long dst,const void*src,unsigned len)
-{
- __inline_memcpy((void *) dst,src,len);
-}
-EXPORT_SYMBOL(__memcpy_toio);
-
-void __memcpy_fromio(void *dst,unsigned long src,unsigned len)
-{
- __inline_memcpy(dst,(const void *) src,len);
-}
-EXPORT_SYMBOL(__memcpy_fromio);
-
-void memset_io(volatile void __iomem *a, int b, size_t c)
-{
- /* XXX: memset can mangle the IO patterns quite a bit.
- perhaps it would be better to use a dumb one */
- memset((void *)a,b,c);
-}
-EXPORT_SYMBOL(memset_io);
+++ /dev/null
-/*
- * Copyright 2006 PathScale, Inc. All Rights Reserved.
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-/*
- * override generic version in lib/iomap_copy.c
- */
-ENTRY(__iowrite32_copy)
- CFI_STARTPROC
- movl %edx,%ecx
- rep movsd
- ret
- CFI_ENDPROC
-ENDPROC(__iowrite32_copy)
+++ /dev/null
-/* Copyright 2002 Andi Kleen */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/cpufeature.h>
-
-/*
- * memcpy - Copy a memory block.
- *
- * Input:
- * rdi destination
- * rsi source
- * rdx count
- *
- * Output:
- * rax original destination
- */
-
- ALIGN
-memcpy_c:
- CFI_STARTPROC
- movq %rdi,%rax
- movl %edx,%ecx
- shrl $3,%ecx
- andl $7,%edx
- rep movsq
- movl %edx,%ecx
- rep movsb
- ret
- CFI_ENDPROC
-ENDPROC(memcpy_c)
-
-ENTRY(__memcpy)
-ENTRY(memcpy)
- CFI_STARTPROC
- pushq %rbx
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rbx, 0
- movq %rdi,%rax
-
- movl %edx,%ecx
- shrl $6,%ecx
- jz .Lhandle_tail
-
- .p2align 4
-.Lloop_64:
- decl %ecx
-
- movq (%rsi),%r11
- movq 8(%rsi),%r8
-
- movq %r11,(%rdi)
- movq %r8,1*8(%rdi)
-
- movq 2*8(%rsi),%r9
- movq 3*8(%rsi),%r10
-
- movq %r9,2*8(%rdi)
- movq %r10,3*8(%rdi)
-
- movq 4*8(%rsi),%r11
- movq 5*8(%rsi),%r8
-
- movq %r11,4*8(%rdi)
- movq %r8,5*8(%rdi)
-
- movq 6*8(%rsi),%r9
- movq 7*8(%rsi),%r10
-
- movq %r9,6*8(%rdi)
- movq %r10,7*8(%rdi)
-
- leaq 64(%rsi),%rsi
- leaq 64(%rdi),%rdi
- jnz .Lloop_64
-
-.Lhandle_tail:
- movl %edx,%ecx
- andl $63,%ecx
- shrl $3,%ecx
- jz .Lhandle_7
- .p2align 4
-.Lloop_8:
- decl %ecx
- movq (%rsi),%r8
- movq %r8,(%rdi)
- leaq 8(%rdi),%rdi
- leaq 8(%rsi),%rsi
- jnz .Lloop_8
-
-.Lhandle_7:
- movl %edx,%ecx
- andl $7,%ecx
- jz .Lende
- .p2align 4
-.Lloop_1:
- movb (%rsi),%r8b
- movb %r8b,(%rdi)
- incq %rdi
- incq %rsi
- decl %ecx
- jnz .Lloop_1
-
-.Lende:
- popq %rbx
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE rbx
- ret
-.Lfinal:
- CFI_ENDPROC
-ENDPROC(memcpy)
-ENDPROC(__memcpy)
-
- /* Some CPUs run faster using the string copy instructions.
- It is also a lot simpler. Use this when possible */
-
- .section .altinstr_replacement,"ax"
-1: .byte 0xeb /* jmp <disp8> */
- .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */
-2:
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad memcpy
- .quad 1b
- .byte X86_FEATURE_REP_GOOD
- /* Replace only beginning, memcpy is used to apply alternatives, so it
- * is silly to overwrite itself with nops - reboot is only outcome... */
- .byte 2b - 1b
- .byte 2b - 1b
- .previous
+++ /dev/null
-/* Normally compiler builtins are used, but sometimes the compiler calls out
- of line code. Based on asm-i386/string.h.
- */
-#define _STRING_C
-#include <linux/string.h>
-#include <linux/module.h>
-
-#undef memmove
-void *memmove(void * dest,const void *src,size_t count)
-{
- if (dest < src) {
- return memcpy(dest,src,count);
- } else {
- char *p = (char *) dest + count;
- char *s = (char *) src + count;
- while (count--)
- *--p = *--s;
- }
- return dest;
-}
-EXPORT_SYMBOL(memmove);
+++ /dev/null
-/* Copyright 2002 Andi Kleen, SuSE Labs */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-
-/*
- * ISO C memset - set a memory block to a byte value.
- *
- * rdi destination
- * rsi value (char)
- * rdx count (bytes)
- *
- * rax original destination
- */
- ALIGN
-memset_c:
- CFI_STARTPROC
- movq %rdi,%r9
- movl %edx,%r8d
- andl $7,%r8d
- movl %edx,%ecx
- shrl $3,%ecx
- /* expand byte value */
- movzbl %sil,%esi
- movabs $0x0101010101010101,%rax
- mulq %rsi /* with rax, clobbers rdx */
- rep stosq
- movl %r8d,%ecx
- rep stosb
- movq %r9,%rax
- ret
- CFI_ENDPROC
-ENDPROC(memset_c)
-
-ENTRY(memset)
-ENTRY(__memset)
- CFI_STARTPROC
- movq %rdi,%r10
- movq %rdx,%r11
-
- /* expand byte value */
- movzbl %sil,%ecx
- movabs $0x0101010101010101,%rax
- mul %rcx /* with rax, clobbers rdx */
-
- /* align dst */
- movl %edi,%r9d
- andl $7,%r9d
- jnz .Lbad_alignment
- CFI_REMEMBER_STATE
-.Lafter_bad_alignment:
-
- movl %r11d,%ecx
- shrl $6,%ecx
- jz .Lhandle_tail
-
- .p2align 4
-.Lloop_64:
- decl %ecx
- movq %rax,(%rdi)
- movq %rax,8(%rdi)
- movq %rax,16(%rdi)
- movq %rax,24(%rdi)
- movq %rax,32(%rdi)
- movq %rax,40(%rdi)
- movq %rax,48(%rdi)
- movq %rax,56(%rdi)
- leaq 64(%rdi),%rdi
- jnz .Lloop_64
-
- /* Handle tail in loops. The loops should be faster than hard
- to predict jump tables. */
- .p2align 4
-.Lhandle_tail:
- movl %r11d,%ecx
- andl $63&(~7),%ecx
- jz .Lhandle_7
- shrl $3,%ecx
- .p2align 4
-.Lloop_8:
- decl %ecx
- movq %rax,(%rdi)
- leaq 8(%rdi),%rdi
- jnz .Lloop_8
-
-.Lhandle_7:
- movl %r11d,%ecx
- andl $7,%ecx
- jz .Lende
- .p2align 4
-.Lloop_1:
- decl %ecx
- movb %al,(%rdi)
- leaq 1(%rdi),%rdi
- jnz .Lloop_1
-
-.Lende:
- movq %r10,%rax
- ret
-
- CFI_RESTORE_STATE
-.Lbad_alignment:
- cmpq $7,%r11
- jbe .Lhandle_7
- movq %rax,(%rdi) /* unaligned store */
- movq $8,%r8
- subq %r9,%r8
- addq %r8,%rdi
- subq %r8,%r11
- jmp .Lafter_bad_alignment
-.Lfinal:
- CFI_ENDPROC
-ENDPROC(memset)
-ENDPROC(__memset)
-
- /* Some CPUs run faster using the string instructions.
- It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
- .section .altinstr_replacement,"ax"
-1: .byte 0xeb /* jmp <disp8> */
- .byte (memset_c - memset) - (2f - 1b) /* offset */
-2:
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad memset
- .quad 1b
- .byte X86_FEATURE_REP_GOOD
- .byte .Lfinal - memset
- .byte 2b - 1b
- .previous
+++ /dev/null
-#include "../../x86/lib/msr-on-cpu.c"
+++ /dev/null
-/*
- * __put_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- * (C) Copyright 2005 Andi Kleen
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __put_user_X
- *
- * Inputs: %rcx contains the address
- * %rdx contains new value
- *
- * Outputs: %rax is error code (0 or -EFAULT)
- *
- * %r8 is destroyed.
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/page.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
- .text
-ENTRY(__put_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae bad_put_user
-1: movb %dl,(%rcx)
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__put_user_1)
-
-ENTRY(__put_user_2)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movw %dx,(%rcx)
- xorl %eax,%eax
- ret
-20: decq %rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_2)
-
-ENTRY(__put_user_4)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl %edx,(%rcx)
- xorl %eax,%eax
- ret
-30: subq $3,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_4)
-
-ENTRY(__put_user_8)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq %rdx,(%rcx)
- xorl %eax,%eax
- ret
-40: subq $7,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_8)
-
-bad_put_user:
- CFI_STARTPROC
- movq $(-EFAULT),%rax
- ret
- CFI_ENDPROC
-END(bad_put_user)
-
-.section __ex_table,"a"
- .quad 1b,bad_put_user
- .quad 2b,bad_put_user
- .quad 3b,bad_put_user
- .quad 4b,bad_put_user
-.previous
+++ /dev/null
-/* Slow paths of read/write spinlocks. */
-
-#include <linux/linkage.h>
-#include <asm/rwlock.h>
-#include <asm/alternative-asm.i>
-#include <asm/dwarf2.h>
-
-/* rdi: pointer to rwlock_t */
-ENTRY(__write_lock_failed)
- CFI_STARTPROC
- LOCK_PREFIX
- addl $RW_LOCK_BIAS,(%rdi)
-1: rep
- nop
- cmpl $RW_LOCK_BIAS,(%rdi)
- jne 1b
- LOCK_PREFIX
- subl $RW_LOCK_BIAS,(%rdi)
- jnz __write_lock_failed
- ret
- CFI_ENDPROC
-END(__write_lock_failed)
-
-/* rdi: pointer to rwlock_t */
-ENTRY(__read_lock_failed)
- CFI_STARTPROC
- LOCK_PREFIX
- incl (%rdi)
-1: rep
- nop
- cmpl $1,(%rdi)
- js 1b
- LOCK_PREFIX
- decl (%rdi)
- js __read_lock_failed
- ret
- CFI_ENDPROC
-END(__read_lock_failed)
+++ /dev/null
-/*
- * Save registers before calling assembly functions. This avoids
- * disturbance of register allocation in some inline assembly constructs.
- * Copyright 2001,2002 by Andi Kleen, SuSE Labs.
- * Subject to the GNU public license, v.2. No warranty of any kind.
- */
-
- #include <linux/linkage.h>
- #include <asm/dwarf2.h>
- #include <asm/calling.h>
- #include <asm/rwlock.h>
-
- /* rdi: arg1 ... normal C conventions. rax is saved/restored. */
- .macro thunk name,func
- .globl \name
-\name:
- CFI_STARTPROC
- SAVE_ARGS
- call \func
- jmp restore
- CFI_ENDPROC
- .endm
-
- /* rdi: arg1 ... normal C conventions. rax is passed from C. */
- .macro thunk_retrax name,func
- .globl \name
-\name:
- CFI_STARTPROC
- SAVE_ARGS
- call \func
- jmp restore_norax
- CFI_ENDPROC
- .endm
-
-
- .section .sched.text
-#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM
- thunk rwsem_down_read_failed_thunk,rwsem_down_read_failed
- thunk rwsem_down_write_failed_thunk,rwsem_down_write_failed
- thunk rwsem_wake_thunk,rwsem_wake
- thunk rwsem_downgrade_thunk,rwsem_downgrade_wake
-#endif
-
- thunk __down_failed,__down
- thunk_retrax __down_failed_interruptible,__down_interruptible
- thunk_retrax __down_failed_trylock,__down_trylock
- thunk __up_wakeup,__up
-
-#ifdef CONFIG_TRACE_IRQFLAGS
- thunk trace_hardirqs_on_thunk,trace_hardirqs_on
- thunk trace_hardirqs_off_thunk,trace_hardirqs_off
-#endif
-
- /* SAVE_ARGS below is used only for the .cfi directives it contains. */
- CFI_STARTPROC
- SAVE_ARGS
-restore:
- RESTORE_ARGS
- ret
- CFI_ENDPROC
-
- CFI_STARTPROC
- SAVE_ARGS
-restore_norax:
- RESTORE_ARGS 1
- ret
- CFI_ENDPROC
+++ /dev/null
-/*
- * User address space access functions.
- *
- * Copyright 1997 Andi Kleen <ak@muc.de>
- * Copyright 1997 Linus Torvalds
- * Copyright 2002 Andi Kleen <ak@suse.de>
- */
-#include <linux/module.h>
-#include <asm/uaccess.h>
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst,src,count,res) \
-do { \
- long __d0, __d1, __d2; \
- might_sleep(); \
- __asm__ __volatile__( \
- " testq %1,%1\n" \
- " jz 2f\n" \
- "0: lodsb\n" \
- " stosb\n" \
- " testb %%al,%%al\n" \
- " jz 1f\n" \
- " decq %1\n" \
- " jnz 0b\n" \
- "1: subq %1,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movq %5,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 8\n" \
- " .quad 0b,3b\n" \
- ".previous" \
- : "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \
- "=&D" (__d2) \
- : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
- : "memory"); \
-} while (0)
-
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- return __strncpy_from_user(dst, src, count);
- return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Zero Userspace
- */
-
-unsigned long __clear_user(void __user *addr, unsigned long size)
-{
- long __d0;
- might_sleep();
- /* no memory constraint because it doesn't change any memory gcc knows
- about */
- asm volatile(
- " testq %[size8],%[size8]\n"
- " jz 4f\n"
- "0: movq %[zero],(%[dst])\n"
- " addq %[eight],%[dst]\n"
- " decl %%ecx ; jnz 0b\n"
- "4: movq %[size1],%%rcx\n"
- " testl %%ecx,%%ecx\n"
- " jz 2f\n"
- "1: movb %b[zero],(%[dst])\n"
- " incq %[dst]\n"
- " decl %%ecx ; jnz 1b\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: lea 0(%[size1],%[size8],8),%[size8]\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 0b,3b\n"
- " .quad 1b,2b\n"
- ".previous"
- : [size8] "=c"(size), [dst] "=&D" (__d0)
- : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
- [zero] "r" (0UL), [eight] "r" (8UL));
- return size;
-}
-EXPORT_SYMBOL(__clear_user);
-
-unsigned long clear_user(void __user *to, unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- return __clear_user(to, n);
- return n;
-}
-EXPORT_SYMBOL(clear_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-
-long __strnlen_user(const char __user *s, long n)
-{
- long res = 0;
- char c;
-
- while (1) {
- if (res>n)
- return n+1;
- if (__get_user(c, s))
- return 0;
- if (!c)
- return res+1;
- res++;
- s++;
- }
-}
-EXPORT_SYMBOL(__strnlen_user);
-
-long strnlen_user(const char __user *s, long n)
-{
- if (!access_ok(VERIFY_READ, s, n))
- return 0;
- return __strnlen_user(s, n);
-}
-EXPORT_SYMBOL(strnlen_user);
-
-long strlen_user(const char __user *s)
-{
- long res = 0;
- char c;
-
- for (;;) {
- if (get_user(c, s))
- return 0;
- if (!c)
- return res+1;
- res++;
- s++;
- }
-}
-EXPORT_SYMBOL(strlen_user);
-
-unsigned long copy_in_user(void __user *to, const void __user *from, unsigned len)
-{
- if (access_ok(VERIFY_WRITE, to, len) && access_ok(VERIFY_READ, from, len)) {
- return copy_user_generic((__force void *)to, (__force void *)from, len);
- }
- return len;
-}
-EXPORT_SYMBOL(copy_in_user);
-
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff