usb: hub: Clear Port Reset Change during init/resume

commit e92aee330837e4911553761490a8fb843f2053a6 upstream.

This patch adds the Port Reset Change flag to the set of bits that are
preemptively cleared on init/resume of a hub. In theory this bit should
never be set unexpectedly... in practice it can still happen if BIOS,
SMM or ACPI code plays around with USB devices without cleaning up
correctly. This is especially dangerous for XHCI root hubs, which don't
generate any more Port Status Change Events until all change bits are
cleared, so this is a good precaution to have (similar to how it's
already done for the Warm Port Reset Change flag).

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c8b9fa0e92751ee9cb7d9a59c6711b64febb11df..1424a8988849587d7d12416286ca47a49d5f12fc 100644 (file)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1129,6 +1129,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
                        usb_clear_port_feature(hub->hdev, port1,
                                        USB_PORT_FEAT_C_ENABLE);
                }
+               if (portchange & USB_PORT_STAT_C_RESET) {
+                       need_debounce_delay = true;
+                       usb_clear_port_feature(hub->hdev, port1,
+                                       USB_PORT_FEAT_C_RESET);
+               }
                if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
                                hub_is_superspeed(hub->hdev)) {
                        need_debounce_delay = true;