379fa22c5b6c9748cfca06a3bf1cca37c0d20c92
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / sound / soc / codecs / wm8993.c
1 /*
2 * wm8993.c -- WM8993 ALSA SoC audio driver
3 *
4 * Copyright 2009, 2010 Wolfson Microelectronics plc
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 #include <linux/module.h>
14 #include <linux/moduleparam.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/pm.h>
18 #include <linux/i2c.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/spi/spi.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/tlv.h>
26 #include <sound/soc.h>
27 #include <sound/initval.h>
28 #include <sound/wm8993.h>
29
30 #include "wm8993.h"
31 #include "wm_hubs.h"
32
33 #define WM8993_NUM_SUPPLIES 6
34 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
35 "DCVDD",
36 "DBVDD",
37 "AVDD1",
38 "AVDD2",
39 "CPVDD",
40 "SPKVDD",
41 };
42
43 static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
44 0x8993, /* R0 - Software Reset */
45 0x0000, /* R1 - Power Management (1) */
46 0x6000, /* R2 - Power Management (2) */
47 0x0000, /* R3 - Power Management (3) */
48 0x4050, /* R4 - Audio Interface (1) */
49 0x4000, /* R5 - Audio Interface (2) */
50 0x01C8, /* R6 - Clocking 1 */
51 0x0000, /* R7 - Clocking 2 */
52 0x0000, /* R8 - Audio Interface (3) */
53 0x0040, /* R9 - Audio Interface (4) */
54 0x0004, /* R10 - DAC CTRL */
55 0x00C0, /* R11 - Left DAC Digital Volume */
56 0x00C0, /* R12 - Right DAC Digital Volume */
57 0x0000, /* R13 - Digital Side Tone */
58 0x0300, /* R14 - ADC CTRL */
59 0x00C0, /* R15 - Left ADC Digital Volume */
60 0x00C0, /* R16 - Right ADC Digital Volume */
61 0x0000, /* R17 */
62 0x0000, /* R18 - GPIO CTRL 1 */
63 0x0010, /* R19 - GPIO1 */
64 0x0000, /* R20 - IRQ_DEBOUNCE */
65 0x0000, /* R21 */
66 0x8000, /* R22 - GPIOCTRL 2 */
67 0x0800, /* R23 - GPIO_POL */
68 0x008B, /* R24 - Left Line Input 1&2 Volume */
69 0x008B, /* R25 - Left Line Input 3&4 Volume */
70 0x008B, /* R26 - Right Line Input 1&2 Volume */
71 0x008B, /* R27 - Right Line Input 3&4 Volume */
72 0x006D, /* R28 - Left Output Volume */
73 0x006D, /* R29 - Right Output Volume */
74 0x0066, /* R30 - Line Outputs Volume */
75 0x0020, /* R31 - HPOUT2 Volume */
76 0x0079, /* R32 - Left OPGA Volume */
77 0x0079, /* R33 - Right OPGA Volume */
78 0x0003, /* R34 - SPKMIXL Attenuation */
79 0x0003, /* R35 - SPKMIXR Attenuation */
80 0x0011, /* R36 - SPKOUT Mixers */
81 0x0100, /* R37 - SPKOUT Boost */
82 0x0079, /* R38 - Speaker Volume Left */
83 0x0079, /* R39 - Speaker Volume Right */
84 0x0000, /* R40 - Input Mixer2 */
85 0x0000, /* R41 - Input Mixer3 */
86 0x0000, /* R42 - Input Mixer4 */
87 0x0000, /* R43 - Input Mixer5 */
88 0x0000, /* R44 - Input Mixer6 */
89 0x0000, /* R45 - Output Mixer1 */
90 0x0000, /* R46 - Output Mixer2 */
91 0x0000, /* R47 - Output Mixer3 */
92 0x0000, /* R48 - Output Mixer4 */
93 0x0000, /* R49 - Output Mixer5 */
94 0x0000, /* R50 - Output Mixer6 */
95 0x0000, /* R51 - HPOUT2 Mixer */
96 0x0000, /* R52 - Line Mixer1 */
97 0x0000, /* R53 - Line Mixer2 */
98 0x0000, /* R54 - Speaker Mixer */
99 0x0000, /* R55 - Additional Control */
100 0x0000, /* R56 - AntiPOP1 */
101 0x0000, /* R57 - AntiPOP2 */
102 0x0000, /* R58 - MICBIAS */
103 0x0000, /* R59 */
104 0x0000, /* R60 - FLL Control 1 */
105 0x0000, /* R61 - FLL Control 2 */
106 0x0000, /* R62 - FLL Control 3 */
107 0x2EE0, /* R63 - FLL Control 4 */
108 0x0002, /* R64 - FLL Control 5 */
109 0x2287, /* R65 - Clocking 3 */
110 0x025F, /* R66 - Clocking 4 */
111 0x0000, /* R67 - MW Slave Control */
112 0x0000, /* R68 */
113 0x0002, /* R69 - Bus Control 1 */
114 0x0000, /* R70 - Write Sequencer 0 */
115 0x0000, /* R71 - Write Sequencer 1 */
116 0x0000, /* R72 - Write Sequencer 2 */
117 0x0000, /* R73 - Write Sequencer 3 */
118 0x0000, /* R74 - Write Sequencer 4 */
119 0x0000, /* R75 - Write Sequencer 5 */
120 0x1F25, /* R76 - Charge Pump 1 */
121 0x0000, /* R77 */
122 0x0000, /* R78 */
123 0x0000, /* R79 */
124 0x0000, /* R80 */
125 0x0000, /* R81 - Class W 0 */
126 0x0000, /* R82 */
127 0x0000, /* R83 */
128 0x0000, /* R84 - DC Servo 0 */
129 0x054A, /* R85 - DC Servo 1 */
130 0x0000, /* R86 */
131 0x0000, /* R87 - DC Servo 3 */
132 0x0000, /* R88 - DC Servo Readback 0 */
133 0x0000, /* R89 - DC Servo Readback 1 */
134 0x0000, /* R90 - DC Servo Readback 2 */
135 0x0000, /* R91 */
136 0x0000, /* R92 */
137 0x0000, /* R93 */
138 0x0000, /* R94 */
139 0x0000, /* R95 */
140 0x0100, /* R96 - Analogue HP 0 */
141 0x0000, /* R97 */
142 0x0000, /* R98 - EQ1 */
143 0x000C, /* R99 - EQ2 */
144 0x000C, /* R100 - EQ3 */
145 0x000C, /* R101 - EQ4 */
146 0x000C, /* R102 - EQ5 */
147 0x000C, /* R103 - EQ6 */
148 0x0FCA, /* R104 - EQ7 */
149 0x0400, /* R105 - EQ8 */
150 0x00D8, /* R106 - EQ9 */
151 0x1EB5, /* R107 - EQ10 */
152 0xF145, /* R108 - EQ11 */
153 0x0B75, /* R109 - EQ12 */
154 0x01C5, /* R110 - EQ13 */
155 0x1C58, /* R111 - EQ14 */
156 0xF373, /* R112 - EQ15 */
157 0x0A54, /* R113 - EQ16 */
158 0x0558, /* R114 - EQ17 */
159 0x168E, /* R115 - EQ18 */
160 0xF829, /* R116 - EQ19 */
161 0x07AD, /* R117 - EQ20 */
162 0x1103, /* R118 - EQ21 */
163 0x0564, /* R119 - EQ22 */
164 0x0559, /* R120 - EQ23 */
165 0x4000, /* R121 - EQ24 */
166 0x0000, /* R122 - Digital Pulls */
167 0x0F08, /* R123 - DRC Control 1 */
168 0x0000, /* R124 - DRC Control 2 */
169 0x0080, /* R125 - DRC Control 3 */
170 0x0000, /* R126 - DRC Control 4 */
171 };
172
173 static struct {
174 int ratio;
175 int clk_sys_rate;
176 } clk_sys_rates[] = {
177 { 64, 0 },
178 { 128, 1 },
179 { 192, 2 },
180 { 256, 3 },
181 { 384, 4 },
182 { 512, 5 },
183 { 768, 6 },
184 { 1024, 7 },
185 { 1408, 8 },
186 { 1536, 9 },
187 };
188
189 static struct {
190 int rate;
191 int sample_rate;
192 } sample_rates[] = {
193 { 8000, 0 },
194 { 11025, 1 },
195 { 12000, 1 },
196 { 16000, 2 },
197 { 22050, 3 },
198 { 24000, 3 },
199 { 32000, 4 },
200 { 44100, 5 },
201 { 48000, 5 },
202 };
203
204 static struct {
205 int div; /* *10 due to .5s */
206 int bclk_div;
207 } bclk_divs[] = {
208 { 10, 0 },
209 { 15, 1 },
210 { 20, 2 },
211 { 30, 3 },
212 { 40, 4 },
213 { 55, 5 },
214 { 60, 6 },
215 { 80, 7 },
216 { 110, 8 },
217 { 120, 9 },
218 { 160, 10 },
219 { 220, 11 },
220 { 240, 12 },
221 { 320, 13 },
222 { 440, 14 },
223 { 480, 15 },
224 };
225
226 struct wm8993_priv {
227 struct wm_hubs_data hubs_data;
228 struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
229 struct wm8993_platform_data pdata;
230 enum snd_soc_control_type control_type;
231 int master;
232 int sysclk_source;
233 int tdm_slots;
234 int tdm_width;
235 unsigned int mclk_rate;
236 unsigned int sysclk_rate;
237 unsigned int fs;
238 unsigned int bclk;
239 int class_w_users;
240 unsigned int fll_fref;
241 unsigned int fll_fout;
242 int fll_src;
243 };
244
245 static int wm8993_volatile(struct snd_soc_codec *codec, unsigned int reg)
246 {
247 switch (reg) {
248 case WM8993_SOFTWARE_RESET:
249 case WM8993_DC_SERVO_0:
250 case WM8993_DC_SERVO_READBACK_0:
251 case WM8993_DC_SERVO_READBACK_1:
252 case WM8993_DC_SERVO_READBACK_2:
253 return 1;
254 default:
255 return 0;
256 }
257 }
258
259 struct _fll_div {
260 u16 fll_fratio;
261 u16 fll_outdiv;
262 u16 fll_clk_ref_div;
263 u16 n;
264 u16 k;
265 };
266
267 /* The size in bits of the FLL divide multiplied by 10
268 * to allow rounding later */
269 #define FIXED_FLL_SIZE ((1 << 16) * 10)
270
271 static struct {
272 unsigned int min;
273 unsigned int max;
274 u16 fll_fratio;
275 int ratio;
276 } fll_fratios[] = {
277 { 0, 64000, 4, 16 },
278 { 64000, 128000, 3, 8 },
279 { 128000, 256000, 2, 4 },
280 { 256000, 1000000, 1, 2 },
281 { 1000000, 13500000, 0, 1 },
282 };
283
284 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
285 unsigned int Fout)
286 {
287 u64 Kpart;
288 unsigned int K, Ndiv, Nmod, target;
289 unsigned int div;
290 int i;
291
292 /* Fref must be <=13.5MHz */
293 div = 1;
294 fll_div->fll_clk_ref_div = 0;
295 while ((Fref / div) > 13500000) {
296 div *= 2;
297 fll_div->fll_clk_ref_div++;
298
299 if (div > 8) {
300 pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
301 Fref);
302 return -EINVAL;
303 }
304 }
305
306 pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
307
308 /* Apply the division for our remaining calculations */
309 Fref /= div;
310
311 /* Fvco should be 90-100MHz; don't check the upper bound */
312 div = 0;
313 target = Fout * 2;
314 while (target < 90000000) {
315 div++;
316 target *= 2;
317 if (div > 7) {
318 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
319 Fout);
320 return -EINVAL;
321 }
322 }
323 fll_div->fll_outdiv = div;
324
325 pr_debug("Fvco=%dHz\n", target);
326
327 /* Find an appropraite FLL_FRATIO and factor it out of the target */
328 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
329 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
330 fll_div->fll_fratio = fll_fratios[i].fll_fratio;
331 target /= fll_fratios[i].ratio;
332 break;
333 }
334 }
335 if (i == ARRAY_SIZE(fll_fratios)) {
336 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
337 return -EINVAL;
338 }
339
340 /* Now, calculate N.K */
341 Ndiv = target / Fref;
342
343 fll_div->n = Ndiv;
344 Nmod = target % Fref;
345 pr_debug("Nmod=%d\n", Nmod);
346
347 /* Calculate fractional part - scale up so we can round. */
348 Kpart = FIXED_FLL_SIZE * (long long)Nmod;
349
350 do_div(Kpart, Fref);
351
352 K = Kpart & 0xFFFFFFFF;
353
354 if ((K % 10) >= 5)
355 K += 5;
356
357 /* Move down to proper range now rounding is done */
358 fll_div->k = K / 10;
359
360 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
361 fll_div->n, fll_div->k,
362 fll_div->fll_fratio, fll_div->fll_outdiv,
363 fll_div->fll_clk_ref_div);
364
365 return 0;
366 }
367
368 static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
369 unsigned int Fref, unsigned int Fout)
370 {
371 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
372 u16 reg1, reg4, reg5;
373 struct _fll_div fll_div;
374 int ret;
375
376 /* Any change? */
377 if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
378 return 0;
379
380 /* Disable the FLL */
381 if (Fout == 0) {
382 dev_dbg(codec->dev, "FLL disabled\n");
383 wm8993->fll_fref = 0;
384 wm8993->fll_fout = 0;
385
386 reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
387 reg1 &= ~WM8993_FLL_ENA;
388 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
389
390 return 0;
391 }
392
393 ret = fll_factors(&fll_div, Fref, Fout);
394 if (ret != 0)
395 return ret;
396
397 reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
398 reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
399
400 switch (fll_id) {
401 case WM8993_FLL_MCLK:
402 break;
403
404 case WM8993_FLL_LRCLK:
405 reg5 |= 1;
406 break;
407
408 case WM8993_FLL_BCLK:
409 reg5 |= 2;
410 break;
411
412 default:
413 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
414 return -EINVAL;
415 }
416
417 /* Any FLL configuration change requires that the FLL be
418 * disabled first. */
419 reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
420 reg1 &= ~WM8993_FLL_ENA;
421 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
422
423 /* Apply the configuration */
424 if (fll_div.k)
425 reg1 |= WM8993_FLL_FRAC_MASK;
426 else
427 reg1 &= ~WM8993_FLL_FRAC_MASK;
428 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
429
430 snd_soc_write(codec, WM8993_FLL_CONTROL_2,
431 (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
432 (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
433 snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
434
435 reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
436 reg4 &= ~WM8993_FLL_N_MASK;
437 reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
438 snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
439
440 reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
441 reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
442 snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
443
444 /* Enable the FLL */
445 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
446
447 dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
448
449 wm8993->fll_fref = Fref;
450 wm8993->fll_fout = Fout;
451 wm8993->fll_src = source;
452
453 return 0;
454 }
455
456 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
457 unsigned int Fref, unsigned int Fout)
458 {
459 return _wm8993_set_fll(dai->codec, fll_id, source, Fref, Fout);
460 }
461
462 static int configure_clock(struct snd_soc_codec *codec)
463 {
464 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
465 unsigned int reg;
466
467 /* This should be done on init() for bypass paths */
468 switch (wm8993->sysclk_source) {
469 case WM8993_SYSCLK_MCLK:
470 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
471
472 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
473 reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
474 if (wm8993->mclk_rate > 13500000) {
475 reg |= WM8993_MCLK_DIV;
476 wm8993->sysclk_rate = wm8993->mclk_rate / 2;
477 } else {
478 reg &= ~WM8993_MCLK_DIV;
479 wm8993->sysclk_rate = wm8993->mclk_rate;
480 }
481 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
482 break;
483
484 case WM8993_SYSCLK_FLL:
485 dev_dbg(codec->dev, "Using %dHz FLL clock\n",
486 wm8993->fll_fout);
487
488 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
489 reg |= WM8993_SYSCLK_SRC;
490 if (wm8993->fll_fout > 13500000) {
491 reg |= WM8993_MCLK_DIV;
492 wm8993->sysclk_rate = wm8993->fll_fout / 2;
493 } else {
494 reg &= ~WM8993_MCLK_DIV;
495 wm8993->sysclk_rate = wm8993->fll_fout;
496 }
497 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
498 break;
499
500 default:
501 dev_err(codec->dev, "System clock not configured\n");
502 return -EINVAL;
503 }
504
505 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
506
507 return 0;
508 }
509
510 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
511 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
512 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
513 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
514 static const unsigned int drc_max_tlv[] = {
515 TLV_DB_RANGE_HEAD(4),
516 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
517 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
518 };
519 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
520 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
521 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
522 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
523 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
524
525 static const char *dac_deemph_text[] = {
526 "None",
527 "32kHz",
528 "44.1kHz",
529 "48kHz",
530 };
531
532 static const struct soc_enum dac_deemph =
533 SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
534
535 static const char *adc_hpf_text[] = {
536 "Hi-Fi",
537 "Voice 1",
538 "Voice 2",
539 "Voice 3",
540 };
541
542 static const struct soc_enum adc_hpf =
543 SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
544
545 static const char *drc_path_text[] = {
546 "ADC",
547 "DAC"
548 };
549
550 static const struct soc_enum drc_path =
551 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
552
553 static const char *drc_r0_text[] = {
554 "1",
555 "1/2",
556 "1/4",
557 "1/8",
558 "1/16",
559 "0",
560 };
561
562 static const struct soc_enum drc_r0 =
563 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
564
565 static const char *drc_r1_text[] = {
566 "1",
567 "1/2",
568 "1/4",
569 "1/8",
570 "0",
571 };
572
573 static const struct soc_enum drc_r1 =
574 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
575
576 static const char *drc_attack_text[] = {
577 "Reserved",
578 "181us",
579 "363us",
580 "726us",
581 "1.45ms",
582 "2.9ms",
583 "5.8ms",
584 "11.6ms",
585 "23.2ms",
586 "46.4ms",
587 "92.8ms",
588 "185.6ms",
589 };
590
591 static const struct soc_enum drc_attack =
592 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
593
594 static const char *drc_decay_text[] = {
595 "186ms",
596 "372ms",
597 "743ms",
598 "1.49s",
599 "2.97ms",
600 "5.94ms",
601 "11.89ms",
602 "23.78ms",
603 "47.56ms",
604 };
605
606 static const struct soc_enum drc_decay =
607 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
608
609 static const char *drc_ff_text[] = {
610 "5 samples",
611 "9 samples",
612 };
613
614 static const struct soc_enum drc_ff =
615 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
616
617 static const char *drc_qr_rate_text[] = {
618 "0.725ms",
619 "1.45ms",
620 "5.8ms",
621 };
622
623 static const struct soc_enum drc_qr_rate =
624 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
625
626 static const char *drc_smooth_text[] = {
627 "Low",
628 "Medium",
629 "High",
630 };
631
632 static const struct soc_enum drc_smooth =
633 SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
634
635 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
636 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
637 5, 9, 12, 0, sidetone_tlv),
638
639 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
640 SOC_ENUM("DRC Path", drc_path),
641 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
642 2, 60, 1, drc_comp_threash),
643 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
644 11, 30, 1, drc_comp_amp),
645 SOC_ENUM("DRC R0", drc_r0),
646 SOC_ENUM("DRC R1", drc_r1),
647 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
648 drc_min_tlv),
649 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
650 drc_max_tlv),
651 SOC_ENUM("DRC Attack Rate", drc_attack),
652 SOC_ENUM("DRC Decay Rate", drc_decay),
653 SOC_ENUM("DRC FF Delay", drc_ff),
654 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
655 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
656 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
657 drc_qr_tlv),
658 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
659 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
660 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
661 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
662 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
663 drc_startup_tlv),
664
665 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
666
667 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
668 WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
669 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
670 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
671
672 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
673 WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
674 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
675 dac_boost_tlv),
676 SOC_ENUM("DAC Deemphasis", dac_deemph),
677
678 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
679 2, 1, 1, wm_hubs_spkmix_tlv),
680
681 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
682 2, 1, 1, wm_hubs_spkmix_tlv),
683 };
684
685 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
686 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
687 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
688 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
689 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
690 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
691 };
692
693 static int clk_sys_event(struct snd_soc_dapm_widget *w,
694 struct snd_kcontrol *kcontrol, int event)
695 {
696 struct snd_soc_codec *codec = w->codec;
697
698 switch (event) {
699 case SND_SOC_DAPM_PRE_PMU:
700 return configure_clock(codec);
701
702 case SND_SOC_DAPM_POST_PMD:
703 break;
704 }
705
706 return 0;
707 }
708
709 /*
710 * When used with DAC outputs only the WM8993 charge pump supports
711 * operation in class W mode, providing very low power consumption
712 * when used with digital sources. Enable and disable this mode
713 * automatically depending on the mixer configuration.
714 *
715 * Currently the only supported paths are the direct DAC->headphone
716 * paths (which provide minimum power consumption anyway).
717 */
718 static int class_w_put(struct snd_kcontrol *kcontrol,
719 struct snd_ctl_elem_value *ucontrol)
720 {
721 struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
722 struct snd_soc_codec *codec = widget->codec;
723 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
724 int ret;
725
726 /* Turn it off if we're using the main output mixer */
727 if (ucontrol->value.integer.value[0] == 0) {
728 if (wm8993->class_w_users == 0) {
729 dev_dbg(codec->dev, "Disabling Class W\n");
730 snd_soc_update_bits(codec, WM8993_CLASS_W_0,
731 WM8993_CP_DYN_FREQ |
732 WM8993_CP_DYN_V,
733 0);
734 }
735 wm8993->class_w_users++;
736 wm8993->hubs_data.class_w = true;
737 }
738
739 /* Implement the change */
740 ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
741
742 /* Enable it if we're using the direct DAC path */
743 if (ucontrol->value.integer.value[0] == 1) {
744 if (wm8993->class_w_users == 1) {
745 dev_dbg(codec->dev, "Enabling Class W\n");
746 snd_soc_update_bits(codec, WM8993_CLASS_W_0,
747 WM8993_CP_DYN_FREQ |
748 WM8993_CP_DYN_V,
749 WM8993_CP_DYN_FREQ |
750 WM8993_CP_DYN_V);
751 }
752 wm8993->class_w_users--;
753 wm8993->hubs_data.class_w = false;
754 }
755
756 dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
757 wm8993->class_w_users);
758
759 return ret;
760 }
761
762 #define SOC_DAPM_ENUM_W(xname, xenum) \
763 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
764 .info = snd_soc_info_enum_double, \
765 .get = snd_soc_dapm_get_enum_double, \
766 .put = class_w_put, \
767 .private_value = (unsigned long)&xenum }
768
769 static const char *hp_mux_text[] = {
770 "Mixer",
771 "DAC",
772 };
773
774 static const struct soc_enum hpl_enum =
775 SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
776
777 static const struct snd_kcontrol_new hpl_mux =
778 SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
779
780 static const struct soc_enum hpr_enum =
781 SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
782
783 static const struct snd_kcontrol_new hpr_mux =
784 SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
785
786 static const struct snd_kcontrol_new left_speaker_mixer[] = {
787 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
788 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
789 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
790 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
791 };
792
793 static const struct snd_kcontrol_new right_speaker_mixer[] = {
794 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
795 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
796 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
797 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
798 };
799
800 static const char *aif_text[] = {
801 "Left", "Right"
802 };
803
804 static const struct soc_enum aifoutl_enum =
805 SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
806
807 static const struct snd_kcontrol_new aifoutl_mux =
808 SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
809
810 static const struct soc_enum aifoutr_enum =
811 SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
812
813 static const struct snd_kcontrol_new aifoutr_mux =
814 SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
815
816 static const struct soc_enum aifinl_enum =
817 SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
818
819 static const struct snd_kcontrol_new aifinl_mux =
820 SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
821
822 static const struct soc_enum aifinr_enum =
823 SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
824
825 static const struct snd_kcontrol_new aifinr_mux =
826 SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
827
828 static const char *sidetone_text[] = {
829 "None", "Left", "Right"
830 };
831
832 static const struct soc_enum sidetonel_enum =
833 SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
834
835 static const struct snd_kcontrol_new sidetonel_mux =
836 SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
837
838 static const struct soc_enum sidetoner_enum =
839 SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
840
841 static const struct snd_kcontrol_new sidetoner_mux =
842 SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
843
844 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
845 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
846 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
847 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
848 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
849
850 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
851 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
852
853 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
854 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
855
856 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
857 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
858
859 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
860 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
861
862 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
863 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
864
865 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
866 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
867
868 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
869 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
870
871 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
872 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
873
874 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
875 left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
876 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
877 right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
878
879 };
880
881 static const struct snd_soc_dapm_route routes[] = {
882 { "ADCL", NULL, "CLK_SYS" },
883 { "ADCL", NULL, "CLK_DSP" },
884 { "ADCR", NULL, "CLK_SYS" },
885 { "ADCR", NULL, "CLK_DSP" },
886
887 { "AIFOUTL Mux", "Left", "ADCL" },
888 { "AIFOUTL Mux", "Right", "ADCR" },
889 { "AIFOUTR Mux", "Left", "ADCL" },
890 { "AIFOUTR Mux", "Right", "ADCR" },
891
892 { "AIFOUTL", NULL, "AIFOUTL Mux" },
893 { "AIFOUTR", NULL, "AIFOUTR Mux" },
894
895 { "DACL Mux", "Left", "AIFINL" },
896 { "DACL Mux", "Right", "AIFINR" },
897 { "DACR Mux", "Left", "AIFINL" },
898 { "DACR Mux", "Right", "AIFINR" },
899
900 { "DACL Sidetone", "Left", "ADCL" },
901 { "DACL Sidetone", "Right", "ADCR" },
902 { "DACR Sidetone", "Left", "ADCL" },
903 { "DACR Sidetone", "Right", "ADCR" },
904
905 { "DACL", NULL, "CLK_SYS" },
906 { "DACL", NULL, "CLK_DSP" },
907 { "DACL", NULL, "DACL Mux" },
908 { "DACL", NULL, "DACL Sidetone" },
909 { "DACR", NULL, "CLK_SYS" },
910 { "DACR", NULL, "CLK_DSP" },
911 { "DACR", NULL, "DACR Mux" },
912 { "DACR", NULL, "DACR Sidetone" },
913
914 { "Left Output Mixer", "DAC Switch", "DACL" },
915
916 { "Right Output Mixer", "DAC Switch", "DACR" },
917
918 { "Left Output PGA", NULL, "CLK_SYS" },
919
920 { "Right Output PGA", NULL, "CLK_SYS" },
921
922 { "SPKL", "DAC Switch", "DACL" },
923 { "SPKL", NULL, "CLK_SYS" },
924
925 { "SPKR", "DAC Switch", "DACR" },
926 { "SPKR", NULL, "CLK_SYS" },
927
928 { "Left Headphone Mux", "DAC", "DACL" },
929 { "Right Headphone Mux", "DAC", "DACR" },
930 };
931
932 static void wm8993_cache_restore(struct snd_soc_codec *codec)
933 {
934 u16 *cache = codec->reg_cache;
935 int i;
936
937 if (!codec->cache_sync)
938 return;
939
940 /* Reenable hardware writes */
941 codec->cache_only = 0;
942
943 /* Restore the register settings */
944 for (i = 1; i < WM8993_MAX_REGISTER; i++) {
945 if (cache[i] == wm8993_reg_defaults[i])
946 continue;
947 snd_soc_write(codec, i, cache[i]);
948 }
949
950 /* We're in sync again */
951 codec->cache_sync = 0;
952 }
953
954 static int wm8993_set_bias_level(struct snd_soc_codec *codec,
955 enum snd_soc_bias_level level)
956 {
957 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
958 int ret;
959
960 switch (level) {
961 case SND_SOC_BIAS_ON:
962 case SND_SOC_BIAS_PREPARE:
963 /* VMID=2*40k */
964 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
965 WM8993_VMID_SEL_MASK, 0x2);
966 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
967 WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
968 break;
969
970 case SND_SOC_BIAS_STANDBY:
971 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
972 ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
973 wm8993->supplies);
974 if (ret != 0)
975 return ret;
976
977 wm8993_cache_restore(codec);
978
979 /* Tune DC servo configuration */
980 snd_soc_write(codec, 0x44, 3);
981 snd_soc_write(codec, 0x56, 3);
982 snd_soc_write(codec, 0x44, 0);
983
984 /* Bring up VMID with fast soft start */
985 snd_soc_update_bits(codec, WM8993_ANTIPOP2,
986 WM8993_STARTUP_BIAS_ENA |
987 WM8993_VMID_BUF_ENA |
988 WM8993_VMID_RAMP_MASK |
989 WM8993_BIAS_SRC,
990 WM8993_STARTUP_BIAS_ENA |
991 WM8993_VMID_BUF_ENA |
992 WM8993_VMID_RAMP_MASK |
993 WM8993_BIAS_SRC);
994
995 /* If either line output is single ended we
996 * need the VMID buffer */
997 if (!wm8993->pdata.lineout1_diff ||
998 !wm8993->pdata.lineout2_diff)
999 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1000 WM8993_LINEOUT_VMID_BUF_ENA,
1001 WM8993_LINEOUT_VMID_BUF_ENA);
1002
1003 /* VMID=2*40k */
1004 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1005 WM8993_VMID_SEL_MASK |
1006 WM8993_BIAS_ENA,
1007 WM8993_BIAS_ENA | 0x2);
1008 msleep(32);
1009
1010 /* Switch to normal bias */
1011 snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1012 WM8993_BIAS_SRC |
1013 WM8993_STARTUP_BIAS_ENA, 0);
1014 }
1015
1016 /* VMID=2*240k */
1017 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1018 WM8993_VMID_SEL_MASK, 0x4);
1019
1020 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1021 WM8993_TSHUT_ENA, 0);
1022 break;
1023
1024 case SND_SOC_BIAS_OFF:
1025 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1026 WM8993_LINEOUT_VMID_BUF_ENA, 0);
1027
1028 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1029 WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1030 0);
1031
1032 snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1033 WM8993_STARTUP_BIAS_ENA |
1034 WM8993_VMID_BUF_ENA |
1035 WM8993_VMID_RAMP_MASK |
1036 WM8993_BIAS_SRC, 0);
1037
1038 #ifdef CONFIG_REGULATOR
1039 /* Post 2.6.34 we will be able to get a callback when
1040 * the regulators are disabled which we can use but
1041 * for now just assume that the power will be cut if
1042 * the regulator API is in use.
1043 */
1044 codec->cache_sync = 1;
1045 #endif
1046
1047 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1048 wm8993->supplies);
1049 break;
1050 }
1051
1052 codec->dapm.bias_level = level;
1053
1054 return 0;
1055 }
1056
1057 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1058 int clk_id, unsigned int freq, int dir)
1059 {
1060 struct snd_soc_codec *codec = codec_dai->codec;
1061 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1062
1063 switch (clk_id) {
1064 case WM8993_SYSCLK_MCLK:
1065 wm8993->mclk_rate = freq;
1066 case WM8993_SYSCLK_FLL:
1067 wm8993->sysclk_source = clk_id;
1068 break;
1069
1070 default:
1071 return -EINVAL;
1072 }
1073
1074 return 0;
1075 }
1076
1077 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1078 unsigned int fmt)
1079 {
1080 struct snd_soc_codec *codec = dai->codec;
1081 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1082 unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1083 unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1084
1085 aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1086 WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1087 aif4 &= ~WM8993_LRCLK_DIR;
1088
1089 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1090 case SND_SOC_DAIFMT_CBS_CFS:
1091 wm8993->master = 0;
1092 break;
1093 case SND_SOC_DAIFMT_CBS_CFM:
1094 aif4 |= WM8993_LRCLK_DIR;
1095 wm8993->master = 1;
1096 break;
1097 case SND_SOC_DAIFMT_CBM_CFS:
1098 aif1 |= WM8993_BCLK_DIR;
1099 wm8993->master = 1;
1100 break;
1101 case SND_SOC_DAIFMT_CBM_CFM:
1102 aif1 |= WM8993_BCLK_DIR;
1103 aif4 |= WM8993_LRCLK_DIR;
1104 wm8993->master = 1;
1105 break;
1106 default:
1107 return -EINVAL;
1108 }
1109
1110 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1111 case SND_SOC_DAIFMT_DSP_B:
1112 aif1 |= WM8993_AIF_LRCLK_INV;
1113 case SND_SOC_DAIFMT_DSP_A:
1114 aif1 |= 0x18;
1115 break;
1116 case SND_SOC_DAIFMT_I2S:
1117 aif1 |= 0x10;
1118 break;
1119 case SND_SOC_DAIFMT_RIGHT_J:
1120 break;
1121 case SND_SOC_DAIFMT_LEFT_J:
1122 aif1 |= 0x8;
1123 break;
1124 default:
1125 return -EINVAL;
1126 }
1127
1128 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1129 case SND_SOC_DAIFMT_DSP_A:
1130 case SND_SOC_DAIFMT_DSP_B:
1131 /* frame inversion not valid for DSP modes */
1132 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1133 case SND_SOC_DAIFMT_NB_NF:
1134 break;
1135 case SND_SOC_DAIFMT_IB_NF:
1136 aif1 |= WM8993_AIF_BCLK_INV;
1137 break;
1138 default:
1139 return -EINVAL;
1140 }
1141 break;
1142
1143 case SND_SOC_DAIFMT_I2S:
1144 case SND_SOC_DAIFMT_RIGHT_J:
1145 case SND_SOC_DAIFMT_LEFT_J:
1146 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1147 case SND_SOC_DAIFMT_NB_NF:
1148 break;
1149 case SND_SOC_DAIFMT_IB_IF:
1150 aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1151 break;
1152 case SND_SOC_DAIFMT_IB_NF:
1153 aif1 |= WM8993_AIF_BCLK_INV;
1154 break;
1155 case SND_SOC_DAIFMT_NB_IF:
1156 aif1 |= WM8993_AIF_LRCLK_INV;
1157 break;
1158 default:
1159 return -EINVAL;
1160 }
1161 break;
1162 default:
1163 return -EINVAL;
1164 }
1165
1166 snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1167 snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1168
1169 return 0;
1170 }
1171
1172 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1173 struct snd_pcm_hw_params *params,
1174 struct snd_soc_dai *dai)
1175 {
1176 struct snd_soc_codec *codec = dai->codec;
1177 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1178 int ret, i, best, best_val, cur_val;
1179 unsigned int clocking1, clocking3, aif1, aif4;
1180
1181 clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1182 clocking1 &= ~WM8993_BCLK_DIV_MASK;
1183
1184 clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1185 clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1186
1187 aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1188 aif1 &= ~WM8993_AIF_WL_MASK;
1189
1190 aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1191 aif4 &= ~WM8993_LRCLK_RATE_MASK;
1192
1193 /* What BCLK do we need? */
1194 wm8993->fs = params_rate(params);
1195 wm8993->bclk = 2 * wm8993->fs;
1196 if (wm8993->tdm_slots) {
1197 dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1198 wm8993->tdm_slots, wm8993->tdm_width);
1199 wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1200 } else {
1201 switch (params_format(params)) {
1202 case SNDRV_PCM_FORMAT_S16_LE:
1203 wm8993->bclk *= 16;
1204 break;
1205 case SNDRV_PCM_FORMAT_S20_3LE:
1206 wm8993->bclk *= 20;
1207 aif1 |= 0x8;
1208 break;
1209 case SNDRV_PCM_FORMAT_S24_LE:
1210 wm8993->bclk *= 24;
1211 aif1 |= 0x10;
1212 break;
1213 case SNDRV_PCM_FORMAT_S32_LE:
1214 wm8993->bclk *= 32;
1215 aif1 |= 0x18;
1216 break;
1217 default:
1218 return -EINVAL;
1219 }
1220 }
1221
1222 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1223
1224 ret = configure_clock(codec);
1225 if (ret != 0)
1226 return ret;
1227
1228 /* Select nearest CLK_SYS_RATE */
1229 best = 0;
1230 best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1231 - wm8993->fs);
1232 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1233 cur_val = abs((wm8993->sysclk_rate /
1234 clk_sys_rates[i].ratio) - wm8993->fs);
1235 if (cur_val < best_val) {
1236 best = i;
1237 best_val = cur_val;
1238 }
1239 }
1240 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1241 clk_sys_rates[best].ratio);
1242 clocking3 |= (clk_sys_rates[best].clk_sys_rate
1243 << WM8993_CLK_SYS_RATE_SHIFT);
1244
1245 /* SAMPLE_RATE */
1246 best = 0;
1247 best_val = abs(wm8993->fs - sample_rates[0].rate);
1248 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1249 /* Closest match */
1250 cur_val = abs(wm8993->fs - sample_rates[i].rate);
1251 if (cur_val < best_val) {
1252 best = i;
1253 best_val = cur_val;
1254 }
1255 }
1256 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1257 sample_rates[best].rate);
1258 clocking3 |= (sample_rates[best].sample_rate
1259 << WM8993_SAMPLE_RATE_SHIFT);
1260
1261 /* BCLK_DIV */
1262 best = 0;
1263 best_val = INT_MAX;
1264 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1265 cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1266 - wm8993->bclk;
1267 if (cur_val < 0) /* Table is sorted */
1268 break;
1269 if (cur_val < best_val) {
1270 best = i;
1271 best_val = cur_val;
1272 }
1273 }
1274 wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1275 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1276 bclk_divs[best].div, wm8993->bclk);
1277 clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1278
1279 /* LRCLK is a simple fraction of BCLK */
1280 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1281 aif4 |= wm8993->bclk / wm8993->fs;
1282
1283 snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1284 snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1285 snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1286 snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1287
1288 /* ReTune Mobile? */
1289 if (wm8993->pdata.num_retune_configs) {
1290 u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1291 struct wm8993_retune_mobile_setting *s;
1292
1293 best = 0;
1294 best_val = abs(wm8993->pdata.retune_configs[0].rate
1295 - wm8993->fs);
1296 for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1297 cur_val = abs(wm8993->pdata.retune_configs[i].rate
1298 - wm8993->fs);
1299 if (cur_val < best_val) {
1300 best_val = cur_val;
1301 best = i;
1302 }
1303 }
1304 s = &wm8993->pdata.retune_configs[best];
1305
1306 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1307 s->name, s->rate);
1308
1309 /* Disable EQ while we reconfigure */
1310 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1311
1312 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1313 snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1314
1315 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1316 }
1317
1318 return 0;
1319 }
1320
1321 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1322 {
1323 struct snd_soc_codec *codec = codec_dai->codec;
1324 unsigned int reg;
1325
1326 reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1327
1328 if (mute)
1329 reg |= WM8993_DAC_MUTE;
1330 else
1331 reg &= ~WM8993_DAC_MUTE;
1332
1333 snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1334
1335 return 0;
1336 }
1337
1338 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1339 unsigned int rx_mask, int slots, int slot_width)
1340 {
1341 struct snd_soc_codec *codec = dai->codec;
1342 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1343 int aif1 = 0;
1344 int aif2 = 0;
1345
1346 /* Don't need to validate anything if we're turning off TDM */
1347 if (slots == 0) {
1348 wm8993->tdm_slots = 0;
1349 goto out;
1350 }
1351
1352 /* Note that we allow configurations we can't handle ourselves -
1353 * for example, we can generate clocks for slots 2 and up even if
1354 * we can't use those slots ourselves.
1355 */
1356 aif1 |= WM8993_AIFADC_TDM;
1357 aif2 |= WM8993_AIFDAC_TDM;
1358
1359 switch (rx_mask) {
1360 case 3:
1361 break;
1362 case 0xc:
1363 aif1 |= WM8993_AIFADC_TDM_CHAN;
1364 break;
1365 default:
1366 return -EINVAL;
1367 }
1368
1369
1370 switch (tx_mask) {
1371 case 3:
1372 break;
1373 case 0xc:
1374 aif2 |= WM8993_AIFDAC_TDM_CHAN;
1375 break;
1376 default:
1377 return -EINVAL;
1378 }
1379
1380 out:
1381 wm8993->tdm_width = slot_width;
1382 wm8993->tdm_slots = slots / 2;
1383
1384 snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1385 WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1386 snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1387 WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1388
1389 return 0;
1390 }
1391
1392 static struct snd_soc_dai_ops wm8993_ops = {
1393 .set_sysclk = wm8993_set_sysclk,
1394 .set_fmt = wm8993_set_dai_fmt,
1395 .hw_params = wm8993_hw_params,
1396 .digital_mute = wm8993_digital_mute,
1397 .set_pll = wm8993_set_fll,
1398 .set_tdm_slot = wm8993_set_tdm_slot,
1399 };
1400
1401 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1402
1403 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1404 SNDRV_PCM_FMTBIT_S20_3LE |\
1405 SNDRV_PCM_FMTBIT_S24_LE |\
1406 SNDRV_PCM_FMTBIT_S32_LE)
1407
1408 static struct snd_soc_dai_driver wm8993_dai = {
1409 .name = "wm8993-hifi",
1410 .playback = {
1411 .stream_name = "Playback",
1412 .channels_min = 1,
1413 .channels_max = 2,
1414 .rates = WM8993_RATES,
1415 .formats = WM8993_FORMATS,
1416 },
1417 .capture = {
1418 .stream_name = "Capture",
1419 .channels_min = 1,
1420 .channels_max = 2,
1421 .rates = WM8993_RATES,
1422 .formats = WM8993_FORMATS,
1423 },
1424 .ops = &wm8993_ops,
1425 .symmetric_rates = 1,
1426 };
1427
1428 static int wm8993_probe(struct snd_soc_codec *codec)
1429 {
1430 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1431 struct snd_soc_dapm_context *dapm = &codec->dapm;
1432 int ret, i, val;
1433
1434 wm8993->hubs_data.hp_startup_mode = 1;
1435 wm8993->hubs_data.dcs_codes = -2;
1436
1437 ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
1438 if (ret != 0) {
1439 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1440 return ret;
1441 }
1442
1443 for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1444 wm8993->supplies[i].supply = wm8993_supply_names[i];
1445
1446 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
1447 wm8993->supplies);
1448 if (ret != 0) {
1449 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1450 return ret;
1451 }
1452
1453 ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1454 wm8993->supplies);
1455 if (ret != 0) {
1456 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
1457 goto err_get;
1458 }
1459
1460 val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
1461 if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
1462 dev_err(codec->dev, "Invalid ID register value %x\n", val);
1463 ret = -EINVAL;
1464 goto err_enable;
1465 }
1466
1467 ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
1468 if (ret != 0)
1469 goto err_enable;
1470
1471 codec->cache_only = 1;
1472
1473 /* By default we're using the output mixers */
1474 wm8993->class_w_users = 2;
1475
1476 /* Latch volume update bits and default ZC on */
1477 snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1478 WM8993_DAC_VU, WM8993_DAC_VU);
1479 snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1480 WM8993_ADC_VU, WM8993_ADC_VU);
1481
1482 /* Manualy manage the HPOUT sequencing for independent stereo
1483 * control. */
1484 snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1485 WM8993_HPOUT1_AUTO_PU, 0);
1486
1487 /* Use automatic clock configuration */
1488 snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1489
1490 wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1491 wm8993->pdata.lineout2_diff,
1492 wm8993->pdata.lineout1fb,
1493 wm8993->pdata.lineout2fb,
1494 wm8993->pdata.jd_scthr,
1495 wm8993->pdata.jd_thr,
1496 wm8993->pdata.micbias1_lvl,
1497 wm8993->pdata.micbias2_lvl);
1498
1499 ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1500 if (ret != 0)
1501 goto err_enable;
1502
1503 snd_soc_add_controls(codec, wm8993_snd_controls,
1504 ARRAY_SIZE(wm8993_snd_controls));
1505 if (wm8993->pdata.num_retune_configs != 0) {
1506 dev_dbg(codec->dev, "Using ReTune Mobile\n");
1507 } else {
1508 dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1509 snd_soc_add_controls(codec, wm8993_eq_controls,
1510 ARRAY_SIZE(wm8993_eq_controls));
1511 }
1512
1513 snd_soc_dapm_new_controls(dapm, wm8993_dapm_widgets,
1514 ARRAY_SIZE(wm8993_dapm_widgets));
1515 wm_hubs_add_analogue_controls(codec);
1516
1517 snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes));
1518 wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1519 wm8993->pdata.lineout2_diff);
1520
1521 return 0;
1522
1523 err_enable:
1524 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1525 err_get:
1526 regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1527 return ret;
1528 }
1529
1530 static int wm8993_remove(struct snd_soc_codec *codec)
1531 {
1532 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1533
1534 wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1535 regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1536 return 0;
1537 }
1538
1539 #ifdef CONFIG_PM
1540 static int wm8993_suspend(struct snd_soc_codec *codec, pm_message_t state)
1541 {
1542 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1543 int fll_fout = wm8993->fll_fout;
1544 int fll_fref = wm8993->fll_fref;
1545 int ret;
1546
1547 /* Stop the FLL in an orderly fashion */
1548 ret = _wm8993_set_fll(codec, 0, 0, 0, 0);
1549 if (ret != 0) {
1550 dev_err(codec->dev, "Failed to stop FLL\n");
1551 return ret;
1552 }
1553
1554 wm8993->fll_fout = fll_fout;
1555 wm8993->fll_fref = fll_fref;
1556
1557 wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1558
1559 return 0;
1560 }
1561
1562 static int wm8993_resume(struct snd_soc_codec *codec)
1563 {
1564 struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1565 int ret;
1566
1567 wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1568
1569 /* Restart the FLL? */
1570 if (wm8993->fll_fout) {
1571 int fll_fout = wm8993->fll_fout;
1572 int fll_fref = wm8993->fll_fref;
1573
1574 wm8993->fll_fref = 0;
1575 wm8993->fll_fout = 0;
1576
1577 ret = _wm8993_set_fll(codec, 0, wm8993->fll_src,
1578 fll_fref, fll_fout);
1579 if (ret != 0)
1580 dev_err(codec->dev, "Failed to restart FLL\n");
1581 }
1582
1583 return 0;
1584 }
1585 #else
1586 #define wm8993_suspend NULL
1587 #define wm8993_resume NULL
1588 #endif
1589
1590 static struct snd_soc_codec_driver soc_codec_dev_wm8993 = {
1591 .probe = wm8993_probe,
1592 .remove = wm8993_remove,
1593 .suspend = wm8993_suspend,
1594 .resume = wm8993_resume,
1595 .set_bias_level = wm8993_set_bias_level,
1596 .reg_cache_size = ARRAY_SIZE(wm8993_reg_defaults),
1597 .reg_word_size = sizeof(u16),
1598 .reg_cache_default = wm8993_reg_defaults,
1599 .volatile_register = wm8993_volatile,
1600 };
1601
1602 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1603 static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
1604 const struct i2c_device_id *id)
1605 {
1606 struct wm8993_priv *wm8993;
1607 int ret;
1608
1609 wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
1610 if (wm8993 == NULL)
1611 return -ENOMEM;
1612
1613 i2c_set_clientdata(i2c, wm8993);
1614
1615 ret = snd_soc_register_codec(&i2c->dev,
1616 &soc_codec_dev_wm8993, &wm8993_dai, 1);
1617 if (ret < 0)
1618 kfree(wm8993);
1619 return ret;
1620 }
1621
1622 static __devexit int wm8993_i2c_remove(struct i2c_client *client)
1623 {
1624 snd_soc_unregister_codec(&client->dev);
1625 kfree(i2c_get_clientdata(client));
1626 return 0;
1627 }
1628
1629 static const struct i2c_device_id wm8993_i2c_id[] = {
1630 { "wm8993", 0 },
1631 { }
1632 };
1633 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1634
1635 static struct i2c_driver wm8993_i2c_driver = {
1636 .driver = {
1637 .name = "wm8993-codec",
1638 .owner = THIS_MODULE,
1639 },
1640 .probe = wm8993_i2c_probe,
1641 .remove = __devexit_p(wm8993_i2c_remove),
1642 .id_table = wm8993_i2c_id,
1643 };
1644 #endif
1645
1646 static int __init wm8993_modinit(void)
1647 {
1648 int ret = 0;
1649 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1650 ret = i2c_add_driver(&wm8993_i2c_driver);
1651 if (ret != 0) {
1652 pr_err("WM8993: Unable to register I2C driver: %d\n",
1653 ret);
1654 }
1655 #endif
1656 return ret;
1657 }
1658 module_init(wm8993_modinit);
1659
1660 static void __exit wm8993_exit(void)
1661 {
1662 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1663 i2c_del_driver(&wm8993_i2c_driver);
1664 #endif
1665 }
1666 module_exit(wm8993_exit);
1667
1668
1669 MODULE_DESCRIPTION("ASoC WM8993 driver");
1670 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1671 MODULE_LICENSE("GPL");