3 * Copyright (C) 1992 Krishna Balasubramanian
4 * Copyright (C) 1995 Eric Schenk, Bruno Haible
6 * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
8 * SMP-threaded, sysctl's added
9 * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
10 * Enforced range limit on SEM_UNDO
11 * (c) 2001 Red Hat Inc
13 * (c) 2003 Manfred Spraul <manfred@colorfullife.com>
14 * Further wakeup optimizations, documentation
15 * (c) 2010 Manfred Spraul <manfred@colorfullife.com>
17 * support for audit of ipc object properties and permission changes
18 * Dustin Kirkland <dustin.kirkland@us.ibm.com>
22 * Pavel Emelianov <xemul@openvz.org>
24 * Implementation notes: (May 2010)
25 * This file implements System V semaphores.
27 * User space visible behavior:
28 * - FIFO ordering for semop() operations (just FIFO, not starvation
30 * - multiple semaphore operations that alter the same semaphore in
31 * one semop() are handled.
32 * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
34 * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
35 * - undo adjustments at process exit are limited to 0..SEMVMX.
36 * - namespace are supported.
37 * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
38 * to /proc/sys/kernel/sem.
39 * - statistics about the usage are reported in /proc/sysvipc/sem.
43 * - all global variables are read-mostly.
44 * - semop() calls and semctl(RMID) are synchronized by RCU.
45 * - most operations do write operations (actually: spin_lock calls) to
46 * the per-semaphore array structure.
47 * Thus: Perfect SMP scaling between independent semaphore arrays.
48 * If multiple semaphores in one array are used, then cache line
49 * trashing on the semaphore array spinlock will limit the scaling.
50 * - semncnt and semzcnt are calculated on demand in count_semncnt() and
52 * - the task that performs a successful semop() scans the list of all
53 * sleeping tasks and completes any pending operations that can be fulfilled.
54 * Semaphores are actively given to waiting tasks (necessary for FIFO).
55 * (see update_queue())
56 * - To improve the scalability, the actual wake-up calls are performed after
57 * dropping all locks. (see wake_up_sem_queue_prepare(),
58 * wake_up_sem_queue_do())
59 * - All work is done by the waker, the woken up task does not have to do
60 * anything - not even acquiring a lock or dropping a refcount.
61 * - A woken up task may not even touch the semaphore array anymore, it may
62 * have been destroyed already by a semctl(RMID).
63 * - The synchronizations between wake-ups due to a timeout/signal and a
64 * wake-up due to a completed semaphore operation is achieved by using an
65 * intermediate state (IN_WAKEUP).
66 * - UNDO values are stored in an array (one per process and per
67 * semaphore array, lazily allocated). For backwards compatibility, multiple
68 * modes for the UNDO variables are supported (per process, per thread)
69 * (see copy_semundo, CLONE_SYSVSEM)
70 * - There are two lists of the pending operations: a per-array list
71 * and per-semaphore list (stored in the array). This allows to achieve FIFO
72 * ordering without always scanning all pending operations.
73 * The worst-case behavior is nevertheless O(N^2) for N wakeups.
76 #include <linux/slab.h>
77 #include <linux/spinlock.h>
78 #include <linux/init.h>
79 #include <linux/proc_fs.h>
80 #include <linux/time.h>
81 #include <linux/security.h>
82 #include <linux/syscalls.h>
83 #include <linux/audit.h>
84 #include <linux/capability.h>
85 #include <linux/seq_file.h>
86 #include <linux/rwsem.h>
87 #include <linux/nsproxy.h>
88 #include <linux/ipc_namespace.h>
90 #include <asm/uaccess.h>
93 /* One semaphore structure for each semaphore in the system. */
95 int semval
; /* current value */
96 int sempid
; /* pid of last operation */
97 spinlock_t lock
; /* spinlock for fine-grained semtimedop */
98 struct list_head pending_alter
; /* pending single-sop operations */
99 /* that alter the semaphore */
100 struct list_head pending_const
; /* pending single-sop operations */
101 /* that do not alter the semaphore*/
102 } ____cacheline_aligned_in_smp
;
104 /* One queue for each sleeping process in the system. */
106 struct list_head list
; /* queue of pending operations */
107 struct task_struct
*sleeper
; /* this process */
108 struct sem_undo
*undo
; /* undo structure */
109 int pid
; /* process id of requesting process */
110 int status
; /* completion status of operation */
111 struct sembuf
*sops
; /* array of pending operations */
112 int nsops
; /* number of operations */
113 int alter
; /* does *sops alter the array? */
116 /* Each task has a list of undo requests. They are executed automatically
117 * when the process exits.
120 struct list_head list_proc
; /* per-process list: *
121 * all undos from one process
123 struct rcu_head rcu
; /* rcu struct for sem_undo */
124 struct sem_undo_list
*ulp
; /* back ptr to sem_undo_list */
125 struct list_head list_id
; /* per semaphore array list:
126 * all undos for one array */
127 int semid
; /* semaphore set identifier */
128 short *semadj
; /* array of adjustments */
129 /* one per semaphore */
132 /* sem_undo_list controls shared access to the list of sem_undo structures
133 * that may be shared among all a CLONE_SYSVSEM task group.
135 struct sem_undo_list
{
138 struct list_head list_proc
;
142 #define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
144 #define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)
146 static int newary(struct ipc_namespace
*, struct ipc_params
*);
147 static void freeary(struct ipc_namespace
*, struct kern_ipc_perm
*);
148 #ifdef CONFIG_PROC_FS
149 static int sysvipc_sem_proc_show(struct seq_file
*s
, void *it
);
152 #define SEMMSL_FAST 256 /* 512 bytes on stack */
153 #define SEMOPM_FAST 64 /* ~ 372 bytes on stack */
156 * linked list protection:
158 * sem_array.pending{_alter,_cont},
159 * sem_array.sem_undo: sem_lock() for read/write
160 * sem_undo.proc_next: only "current" is allowed to read/write that field.
164 #define sc_semmsl sem_ctls[0]
165 #define sc_semmns sem_ctls[1]
166 #define sc_semopm sem_ctls[2]
167 #define sc_semmni sem_ctls[3]
169 void sem_init_ns(struct ipc_namespace
*ns
)
171 ns
->sc_semmsl
= SEMMSL
;
172 ns
->sc_semmns
= SEMMNS
;
173 ns
->sc_semopm
= SEMOPM
;
174 ns
->sc_semmni
= SEMMNI
;
176 ipc_init_ids(&ns
->ids
[IPC_SEM_IDS
]);
180 void sem_exit_ns(struct ipc_namespace
*ns
)
182 free_ipcs(ns
, &sem_ids(ns
), freeary
);
183 idr_destroy(&ns
->ids
[IPC_SEM_IDS
].ipcs_idr
);
187 void __init
sem_init (void)
189 sem_init_ns(&init_ipc_ns
);
190 ipc_init_proc_interface("sysvipc/sem",
191 " key semid perms nsems uid gid cuid cgid otime ctime\n",
192 IPC_SEM_IDS
, sysvipc_sem_proc_show
);
196 * unmerge_queues - unmerge queues, if possible.
197 * @sma: semaphore array
199 * The function unmerges the wait queues if complex_count is 0.
200 * It must be called prior to dropping the global semaphore array lock.
202 static void unmerge_queues(struct sem_array
*sma
)
204 struct sem_queue
*q
, *tq
;
206 /* complex operations still around? */
207 if (sma
->complex_count
)
210 * We will switch back to simple mode.
211 * Move all pending operation back into the per-semaphore
214 list_for_each_entry_safe(q
, tq
, &sma
->pending_alter
, list
) {
216 curr
= &sma
->sem_base
[q
->sops
[0].sem_num
];
218 list_add_tail(&q
->list
, &curr
->pending_alter
);
220 INIT_LIST_HEAD(&sma
->pending_alter
);
224 * merge_queues - Merge single semop queues into global queue
225 * @sma: semaphore array
227 * This function merges all per-semaphore queues into the global queue.
228 * It is necessary to achieve FIFO ordering for the pending single-sop
229 * operations when a multi-semop operation must sleep.
230 * Only the alter operations must be moved, the const operations can stay.
232 static void merge_queues(struct sem_array
*sma
)
235 for (i
= 0; i
< sma
->sem_nsems
; i
++) {
236 struct sem
*sem
= sma
->sem_base
+ i
;
238 list_splice_init(&sem
->pending_alter
, &sma
->pending_alter
);
243 * If the request contains only one semaphore operation, and there are
244 * no complex transactions pending, lock only the semaphore involved.
245 * Otherwise, lock the entire semaphore array, since we either have
246 * multiple semaphores in our own semops, or we need to look at
247 * semaphores from other pending complex operations.
249 * Carefully guard against sma->complex_count changing between zero
250 * and non-zero while we are spinning for the lock. The value of
251 * sma->complex_count cannot change while we are holding the lock,
252 * so sem_unlock should be fine.
254 * The global lock path checks that all the local locks have been released,
255 * checking each local lock once. This means that the local lock paths
256 * cannot start their critical sections while the global lock is held.
258 static inline int sem_lock(struct sem_array
*sma
, struct sembuf
*sops
,
263 if (nsops
== 1 && !sma
->complex_count
) {
264 struct sem
*sem
= sma
->sem_base
+ sops
->sem_num
;
266 /* Lock just the semaphore we are interested in. */
267 spin_lock(&sem
->lock
);
270 * If sma->complex_count was set while we were spinning,
271 * we may need to look at things we did not lock here.
273 if (unlikely(sma
->complex_count
)) {
274 spin_unlock(&sem
->lock
);
279 * Another process is holding the global lock on the
280 * sem_array; we cannot enter our critical section,
281 * but have to wait for the global lock to be released.
283 if (unlikely(spin_is_locked(&sma
->sem_perm
.lock
))) {
284 spin_unlock(&sem
->lock
);
285 spin_unlock_wait(&sma
->sem_perm
.lock
);
289 locknum
= sops
->sem_num
;
293 * Lock the semaphore array, and wait for all of the
294 * individual semaphore locks to go away. The code
295 * above ensures no new single-lock holders will enter
296 * their critical section while the array lock is held.
299 ipc_lock_object(&sma
->sem_perm
);
300 for (i
= 0; i
< sma
->sem_nsems
; i
++) {
301 struct sem
*sem
= sma
->sem_base
+ i
;
302 spin_unlock_wait(&sem
->lock
);
309 static inline void sem_unlock(struct sem_array
*sma
, int locknum
)
313 ipc_unlock_object(&sma
->sem_perm
);
315 struct sem
*sem
= sma
->sem_base
+ locknum
;
316 spin_unlock(&sem
->lock
);
321 * sem_lock_(check_) routines are called in the paths where the rw_mutex
324 * The caller holds the RCU read lock.
326 static inline struct sem_array
*sem_obtain_lock(struct ipc_namespace
*ns
,
327 int id
, struct sembuf
*sops
, int nsops
, int *locknum
)
329 struct kern_ipc_perm
*ipcp
;
330 struct sem_array
*sma
;
332 ipcp
= ipc_obtain_object(&sem_ids(ns
), id
);
334 return ERR_CAST(ipcp
);
336 sma
= container_of(ipcp
, struct sem_array
, sem_perm
);
337 *locknum
= sem_lock(sma
, sops
, nsops
);
339 /* ipc_rmid() may have already freed the ID while sem_lock
340 * was spinning: verify that the structure is still valid
343 return container_of(ipcp
, struct sem_array
, sem_perm
);
345 sem_unlock(sma
, *locknum
);
346 return ERR_PTR(-EINVAL
);
349 static inline struct sem_array
*sem_obtain_object(struct ipc_namespace
*ns
, int id
)
351 struct kern_ipc_perm
*ipcp
= ipc_obtain_object(&sem_ids(ns
), id
);
354 return ERR_CAST(ipcp
);
356 return container_of(ipcp
, struct sem_array
, sem_perm
);
359 static inline struct sem_array
*sem_obtain_object_check(struct ipc_namespace
*ns
,
362 struct kern_ipc_perm
*ipcp
= ipc_obtain_object_check(&sem_ids(ns
), id
);
365 return ERR_CAST(ipcp
);
367 return container_of(ipcp
, struct sem_array
, sem_perm
);
370 static inline void sem_lock_and_putref(struct sem_array
*sma
)
372 sem_lock(sma
, NULL
, -1);
376 static inline void sem_putref(struct sem_array
*sma
)
381 static inline void sem_rmid(struct ipc_namespace
*ns
, struct sem_array
*s
)
383 ipc_rmid(&sem_ids(ns
), &s
->sem_perm
);
387 * Lockless wakeup algorithm:
388 * Without the check/retry algorithm a lockless wakeup is possible:
389 * - queue.status is initialized to -EINTR before blocking.
390 * - wakeup is performed by
391 * * unlinking the queue entry from the pending list
392 * * setting queue.status to IN_WAKEUP
393 * This is the notification for the blocked thread that a
394 * result value is imminent.
395 * * call wake_up_process
396 * * set queue.status to the final value.
397 * - the previously blocked thread checks queue.status:
398 * * if it's IN_WAKEUP, then it must wait until the value changes
399 * * if it's not -EINTR, then the operation was completed by
400 * update_queue. semtimedop can return queue.status without
401 * performing any operation on the sem array.
402 * * otherwise it must acquire the spinlock and check what's up.
404 * The two-stage algorithm is necessary to protect against the following
406 * - if queue.status is set after wake_up_process, then the woken up idle
407 * thread could race forward and try (and fail) to acquire sma->lock
408 * before update_queue had a chance to set queue.status
409 * - if queue.status is written before wake_up_process and if the
410 * blocked process is woken up by a signal between writing
411 * queue.status and the wake_up_process, then the woken up
412 * process could return from semtimedop and die by calling
413 * sys_exit before wake_up_process is called. Then wake_up_process
414 * will oops, because the task structure is already invalid.
415 * (yes, this happened on s390 with sysv msg).
421 * newary - Create a new semaphore set
423 * @params: ptr to the structure that contains key, semflg and nsems
425 * Called with sem_ids.rw_mutex held (as a writer)
428 static int newary(struct ipc_namespace
*ns
, struct ipc_params
*params
)
432 struct sem_array
*sma
;
434 key_t key
= params
->key
;
435 int nsems
= params
->u
.nsems
;
436 int semflg
= params
->flg
;
441 if (ns
->used_sems
+ nsems
> ns
->sc_semmns
)
444 size
= sizeof (*sma
) + nsems
* sizeof (struct sem
);
445 sma
= ipc_rcu_alloc(size
);
449 memset (sma
, 0, size
);
451 sma
->sem_perm
.mode
= (semflg
& S_IRWXUGO
);
452 sma
->sem_perm
.key
= key
;
454 sma
->sem_perm
.security
= NULL
;
455 retval
= security_sem_alloc(sma
);
461 id
= ipc_addid(&sem_ids(ns
), &sma
->sem_perm
, ns
->sc_semmni
);
463 security_sem_free(sma
);
467 ns
->used_sems
+= nsems
;
469 sma
->sem_base
= (struct sem
*) &sma
[1];
471 for (i
= 0; i
< nsems
; i
++) {
472 INIT_LIST_HEAD(&sma
->sem_base
[i
].pending_alter
);
473 INIT_LIST_HEAD(&sma
->sem_base
[i
].pending_const
);
474 spin_lock_init(&sma
->sem_base
[i
].lock
);
477 sma
->complex_count
= 0;
478 INIT_LIST_HEAD(&sma
->pending_alter
);
479 INIT_LIST_HEAD(&sma
->pending_const
);
480 INIT_LIST_HEAD(&sma
->list_id
);
481 sma
->sem_nsems
= nsems
;
482 sma
->sem_ctime
= get_seconds();
486 return sma
->sem_perm
.id
;
491 * Called with sem_ids.rw_mutex and ipcp locked.
493 static inline int sem_security(struct kern_ipc_perm
*ipcp
, int semflg
)
495 struct sem_array
*sma
;
497 sma
= container_of(ipcp
, struct sem_array
, sem_perm
);
498 return security_sem_associate(sma
, semflg
);
502 * Called with sem_ids.rw_mutex and ipcp locked.
504 static inline int sem_more_checks(struct kern_ipc_perm
*ipcp
,
505 struct ipc_params
*params
)
507 struct sem_array
*sma
;
509 sma
= container_of(ipcp
, struct sem_array
, sem_perm
);
510 if (params
->u
.nsems
> sma
->sem_nsems
)
516 SYSCALL_DEFINE3(semget
, key_t
, key
, int, nsems
, int, semflg
)
518 struct ipc_namespace
*ns
;
519 struct ipc_ops sem_ops
;
520 struct ipc_params sem_params
;
522 ns
= current
->nsproxy
->ipc_ns
;
524 if (nsems
< 0 || nsems
> ns
->sc_semmsl
)
527 sem_ops
.getnew
= newary
;
528 sem_ops
.associate
= sem_security
;
529 sem_ops
.more_checks
= sem_more_checks
;
531 sem_params
.key
= key
;
532 sem_params
.flg
= semflg
;
533 sem_params
.u
.nsems
= nsems
;
535 return ipcget(ns
, &sem_ids(ns
), &sem_ops
, &sem_params
);
539 * Determine whether a sequence of semaphore operations would succeed
540 * all at once. Return 0 if yes, 1 if need to sleep, else return error code.
543 static int try_atomic_semop (struct sem_array
* sma
, struct sembuf
* sops
,
544 int nsops
, struct sem_undo
*un
, int pid
)
550 for (sop
= sops
; sop
< sops
+ nsops
; sop
++) {
551 curr
= sma
->sem_base
+ sop
->sem_num
;
552 sem_op
= sop
->sem_op
;
553 result
= curr
->semval
;
555 if (!sem_op
&& result
)
563 if (sop
->sem_flg
& SEM_UNDO
) {
564 int undo
= un
->semadj
[sop
->sem_num
] - sem_op
;
566 * Exceeding the undo range is an error.
568 if (undo
< (-SEMAEM
- 1) || undo
> SEMAEM
)
571 curr
->semval
= result
;
575 while (sop
>= sops
) {
576 sma
->sem_base
[sop
->sem_num
].sempid
= pid
;
577 if (sop
->sem_flg
& SEM_UNDO
)
578 un
->semadj
[sop
->sem_num
] -= sop
->sem_op
;
589 if (sop
->sem_flg
& IPC_NOWAIT
)
596 while (sop
>= sops
) {
597 sma
->sem_base
[sop
->sem_num
].semval
-= sop
->sem_op
;
604 /** wake_up_sem_queue_prepare(q, error): Prepare wake-up
605 * @q: queue entry that must be signaled
606 * @error: Error value for the signal
608 * Prepare the wake-up of the queue entry q.
610 static void wake_up_sem_queue_prepare(struct list_head
*pt
,
611 struct sem_queue
*q
, int error
)
613 if (list_empty(pt
)) {
615 * Hold preempt off so that we don't get preempted and have the
616 * wakee busy-wait until we're scheduled back on.
620 q
->status
= IN_WAKEUP
;
623 list_add_tail(&q
->list
, pt
);
627 * wake_up_sem_queue_do(pt) - do the actual wake-up
628 * @pt: list of tasks to be woken up
630 * Do the actual wake-up.
631 * The function is called without any locks held, thus the semaphore array
632 * could be destroyed already and the tasks can disappear as soon as the
633 * status is set to the actual return code.
635 static void wake_up_sem_queue_do(struct list_head
*pt
)
637 struct sem_queue
*q
, *t
;
640 did_something
= !list_empty(pt
);
641 list_for_each_entry_safe(q
, t
, pt
, list
) {
642 wake_up_process(q
->sleeper
);
643 /* q can disappear immediately after writing q->status. */
651 static void unlink_queue(struct sem_array
*sma
, struct sem_queue
*q
)
655 sma
->complex_count
--;
658 /** check_restart(sma, q)
659 * @sma: semaphore array
660 * @q: the operation that just completed
662 * update_queue is O(N^2) when it restarts scanning the whole queue of
663 * waiting operations. Therefore this function checks if the restart is
664 * really necessary. It is called after a previously waiting operation
665 * modified the array.
666 * Note that wait-for-zero operations are handled without restart.
668 static int check_restart(struct sem_array
*sma
, struct sem_queue
*q
)
670 /* pending complex alter operations are too difficult to analyse */
671 if (!list_empty(&sma
->pending_alter
))
674 /* we were a sleeping complex operation. Too difficult */
678 /* It is impossible that someone waits for the new value:
679 * - complex operations always restart.
680 * - wait-for-zero are handled seperately.
681 * - q is a previously sleeping simple operation that
682 * altered the array. It must be a decrement, because
683 * simple increments never sleep.
684 * - If there are older (higher priority) decrements
685 * in the queue, then they have observed the original
686 * semval value and couldn't proceed. The operation
687 * decremented to value - thus they won't proceed either.
693 * wake_const_ops(sma, semnum, pt) - Wake up non-alter tasks
694 * @sma: semaphore array.
695 * @semnum: semaphore that was modified.
696 * @pt: list head for the tasks that must be woken up.
698 * wake_const_ops must be called after a semaphore in a semaphore array
699 * was set to 0. If complex const operations are pending, wake_const_ops must
700 * be called with semnum = -1, as well as with the number of each modified
702 * The tasks that must be woken up are added to @pt. The return code
703 * is stored in q->pid.
704 * The function returns 1 if at least one operation was completed successfully.
706 static int wake_const_ops(struct sem_array
*sma
, int semnum
,
707 struct list_head
*pt
)
710 struct list_head
*walk
;
711 struct list_head
*pending_list
;
712 int semop_completed
= 0;
715 pending_list
= &sma
->pending_const
;
717 pending_list
= &sma
->sem_base
[semnum
].pending_const
;
719 walk
= pending_list
->next
;
720 while (walk
!= pending_list
) {
723 q
= container_of(walk
, struct sem_queue
, list
);
726 error
= try_atomic_semop(sma
, q
->sops
, q
->nsops
,
730 /* operation completed, remove from queue & wakeup */
732 unlink_queue(sma
, q
);
734 wake_up_sem_queue_prepare(pt
, q
, error
);
739 return semop_completed
;
743 * do_smart_wakeup_zero(sma, sops, nsops, pt) - wakeup all wait for zero tasks
744 * @sma: semaphore array
745 * @sops: operations that were performed
746 * @nsops: number of operations
747 * @pt: list head of the tasks that must be woken up.
749 * do_smart_wakeup_zero() checks all required queue for wait-for-zero
750 * operations, based on the actual changes that were performed on the
752 * The function returns 1 if at least one operation was completed successfully.
754 static int do_smart_wakeup_zero(struct sem_array
*sma
, struct sembuf
*sops
,
755 int nsops
, struct list_head
*pt
)
758 int semop_completed
= 0;
761 /* first: the per-semaphore queues, if known */
763 for (i
= 0; i
< nsops
; i
++) {
764 int num
= sops
[i
].sem_num
;
766 if (sma
->sem_base
[num
].semval
== 0) {
768 semop_completed
|= wake_const_ops(sma
, num
, pt
);
773 * No sops means modified semaphores not known.
774 * Assume all were changed.
776 for (i
= 0; i
< sma
->sem_nsems
; i
++) {
777 if (sma
->sem_base
[i
].semval
== 0) {
779 semop_completed
|= wake_const_ops(sma
, i
, pt
);
784 * If one of the modified semaphores got 0,
785 * then check the global queue, too.
788 semop_completed
|= wake_const_ops(sma
, -1, pt
);
790 return semop_completed
;
795 * update_queue(sma, semnum): Look for tasks that can be completed.
796 * @sma: semaphore array.
797 * @semnum: semaphore that was modified.
798 * @pt: list head for the tasks that must be woken up.
800 * update_queue must be called after a semaphore in a semaphore array
801 * was modified. If multiple semaphores were modified, update_queue must
802 * be called with semnum = -1, as well as with the number of each modified
804 * The tasks that must be woken up are added to @pt. The return code
805 * is stored in q->pid.
806 * The function internally checks if const operations can now succeed.
808 * The function return 1 if at least one semop was completed successfully.
810 static int update_queue(struct sem_array
*sma
, int semnum
, struct list_head
*pt
)
813 struct list_head
*walk
;
814 struct list_head
*pending_list
;
815 int semop_completed
= 0;
818 pending_list
= &sma
->pending_alter
;
820 pending_list
= &sma
->sem_base
[semnum
].pending_alter
;
823 walk
= pending_list
->next
;
824 while (walk
!= pending_list
) {
827 q
= container_of(walk
, struct sem_queue
, list
);
830 /* If we are scanning the single sop, per-semaphore list of
831 * one semaphore and that semaphore is 0, then it is not
832 * necessary to scan further: simple increments
833 * that affect only one entry succeed immediately and cannot
834 * be in the per semaphore pending queue, and decrements
835 * cannot be successful if the value is already 0.
837 if (semnum
!= -1 && sma
->sem_base
[semnum
].semval
== 0)
840 error
= try_atomic_semop(sma
, q
->sops
, q
->nsops
,
843 /* Does q->sleeper still need to sleep? */
847 unlink_queue(sma
, q
);
853 do_smart_wakeup_zero(sma
, q
->sops
, q
->nsops
, pt
);
854 restart
= check_restart(sma
, q
);
857 wake_up_sem_queue_prepare(pt
, q
, error
);
861 return semop_completed
;
865 * do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue
866 * @sma: semaphore array
867 * @sops: operations that were performed
868 * @nsops: number of operations
869 * @otime: force setting otime
870 * @pt: list head of the tasks that must be woken up.
872 * do_smart_update() does the required calls to update_queue and wakeup_zero,
873 * based on the actual changes that were performed on the semaphore array.
874 * Note that the function does not do the actual wake-up: the caller is
875 * responsible for calling wake_up_sem_queue_do(@pt).
876 * It is safe to perform this call after dropping all locks.
878 static void do_smart_update(struct sem_array
*sma
, struct sembuf
*sops
, int nsops
,
879 int otime
, struct list_head
*pt
)
883 otime
|= do_smart_wakeup_zero(sma
, sops
, nsops
, pt
);
885 if (!list_empty(&sma
->pending_alter
)) {
886 /* semaphore array uses the global queue - just process it. */
887 otime
|= update_queue(sma
, -1, pt
);
891 * No sops, thus the modified semaphores are not
894 for (i
= 0; i
< sma
->sem_nsems
; i
++)
895 otime
|= update_queue(sma
, i
, pt
);
898 * Check the semaphores that were increased:
899 * - No complex ops, thus all sleeping ops are
901 * - if we decreased the value, then any sleeping
902 * semaphore ops wont be able to run: If the
903 * previous value was too small, then the new
904 * value will be too small, too.
906 for (i
= 0; i
< nsops
; i
++) {
907 if (sops
[i
].sem_op
> 0) {
908 otime
|= update_queue(sma
,
909 sops
[i
].sem_num
, pt
);
915 sma
->sem_otime
= get_seconds();
919 /* The following counts are associated to each semaphore:
920 * semncnt number of tasks waiting on semval being nonzero
921 * semzcnt number of tasks waiting on semval being zero
922 * This model assumes that a task waits on exactly one semaphore.
923 * Since semaphore operations are to be performed atomically, tasks actually
924 * wait on a whole sequence of semaphores simultaneously.
925 * The counts we return here are a rough approximation, but still
926 * warrant that semncnt+semzcnt>0 if the task is on the pending queue.
928 static int count_semncnt (struct sem_array
* sma
, ushort semnum
)
931 struct sem_queue
* q
;
934 list_for_each_entry(q
, &sma
->sem_base
[semnum
].pending_alter
, list
) {
935 struct sembuf
* sops
= q
->sops
;
936 BUG_ON(sops
->sem_num
!= semnum
);
937 if ((sops
->sem_op
< 0) && !(sops
->sem_flg
& IPC_NOWAIT
))
941 list_for_each_entry(q
, &sma
->pending_alter
, list
) {
942 struct sembuf
* sops
= q
->sops
;
943 int nsops
= q
->nsops
;
945 for (i
= 0; i
< nsops
; i
++)
946 if (sops
[i
].sem_num
== semnum
947 && (sops
[i
].sem_op
< 0)
948 && !(sops
[i
].sem_flg
& IPC_NOWAIT
))
954 static int count_semzcnt (struct sem_array
* sma
, ushort semnum
)
957 struct sem_queue
* q
;
960 list_for_each_entry(q
, &sma
->sem_base
[semnum
].pending_const
, list
) {
961 struct sembuf
* sops
= q
->sops
;
962 BUG_ON(sops
->sem_num
!= semnum
);
963 if ((sops
->sem_op
== 0) && !(sops
->sem_flg
& IPC_NOWAIT
))
967 list_for_each_entry(q
, &sma
->pending_const
, list
) {
968 struct sembuf
* sops
= q
->sops
;
969 int nsops
= q
->nsops
;
971 for (i
= 0; i
< nsops
; i
++)
972 if (sops
[i
].sem_num
== semnum
973 && (sops
[i
].sem_op
== 0)
974 && !(sops
[i
].sem_flg
& IPC_NOWAIT
))
980 /* Free a semaphore set. freeary() is called with sem_ids.rw_mutex locked
981 * as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex
982 * remains locked on exit.
984 static void freeary(struct ipc_namespace
*ns
, struct kern_ipc_perm
*ipcp
)
986 struct sem_undo
*un
, *tu
;
987 struct sem_queue
*q
, *tq
;
988 struct sem_array
*sma
= container_of(ipcp
, struct sem_array
, sem_perm
);
989 struct list_head tasks
;
992 /* Free the existing undo structures for this semaphore set. */
993 ipc_assert_locked_object(&sma
->sem_perm
);
994 list_for_each_entry_safe(un
, tu
, &sma
->list_id
, list_id
) {
995 list_del(&un
->list_id
);
996 spin_lock(&un
->ulp
->lock
);
998 list_del_rcu(&un
->list_proc
);
999 spin_unlock(&un
->ulp
->lock
);
1003 /* Wake up all pending processes and let them fail with EIDRM. */
1004 INIT_LIST_HEAD(&tasks
);
1005 list_for_each_entry_safe(q
, tq
, &sma
->pending_const
, list
) {
1006 unlink_queue(sma
, q
);
1007 wake_up_sem_queue_prepare(&tasks
, q
, -EIDRM
);
1010 list_for_each_entry_safe(q
, tq
, &sma
->pending_alter
, list
) {
1011 unlink_queue(sma
, q
);
1012 wake_up_sem_queue_prepare(&tasks
, q
, -EIDRM
);
1014 for (i
= 0; i
< sma
->sem_nsems
; i
++) {
1015 struct sem
*sem
= sma
->sem_base
+ i
;
1016 list_for_each_entry_safe(q
, tq
, &sem
->pending_const
, list
) {
1017 unlink_queue(sma
, q
);
1018 wake_up_sem_queue_prepare(&tasks
, q
, -EIDRM
);
1020 list_for_each_entry_safe(q
, tq
, &sem
->pending_alter
, list
) {
1021 unlink_queue(sma
, q
);
1022 wake_up_sem_queue_prepare(&tasks
, q
, -EIDRM
);
1026 /* Remove the semaphore set from the IDR */
1028 sem_unlock(sma
, -1);
1031 wake_up_sem_queue_do(&tasks
);
1032 ns
->used_sems
-= sma
->sem_nsems
;
1033 security_sem_free(sma
);
1034 ipc_rcu_putref(sma
);
1037 static unsigned long copy_semid_to_user(void __user
*buf
, struct semid64_ds
*in
, int version
)
1041 return copy_to_user(buf
, in
, sizeof(*in
));
1044 struct semid_ds out
;
1046 memset(&out
, 0, sizeof(out
));
1048 ipc64_perm_to_ipc_perm(&in
->sem_perm
, &out
.sem_perm
);
1050 out
.sem_otime
= in
->sem_otime
;
1051 out
.sem_ctime
= in
->sem_ctime
;
1052 out
.sem_nsems
= in
->sem_nsems
;
1054 return copy_to_user(buf
, &out
, sizeof(out
));
1061 static int semctl_nolock(struct ipc_namespace
*ns
, int semid
,
1062 int cmd
, int version
, void __user
*p
)
1065 struct sem_array
*sma
;
1071 struct seminfo seminfo
;
1074 err
= security_sem_semctl(NULL
, cmd
);
1078 memset(&seminfo
,0,sizeof(seminfo
));
1079 seminfo
.semmni
= ns
->sc_semmni
;
1080 seminfo
.semmns
= ns
->sc_semmns
;
1081 seminfo
.semmsl
= ns
->sc_semmsl
;
1082 seminfo
.semopm
= ns
->sc_semopm
;
1083 seminfo
.semvmx
= SEMVMX
;
1084 seminfo
.semmnu
= SEMMNU
;
1085 seminfo
.semmap
= SEMMAP
;
1086 seminfo
.semume
= SEMUME
;
1087 down_read(&sem_ids(ns
).rw_mutex
);
1088 if (cmd
== SEM_INFO
) {
1089 seminfo
.semusz
= sem_ids(ns
).in_use
;
1090 seminfo
.semaem
= ns
->used_sems
;
1092 seminfo
.semusz
= SEMUSZ
;
1093 seminfo
.semaem
= SEMAEM
;
1095 max_id
= ipc_get_maxid(&sem_ids(ns
));
1096 up_read(&sem_ids(ns
).rw_mutex
);
1097 if (copy_to_user(p
, &seminfo
, sizeof(struct seminfo
)))
1099 return (max_id
< 0) ? 0: max_id
;
1104 struct semid64_ds tbuf
;
1107 memset(&tbuf
, 0, sizeof(tbuf
));
1110 if (cmd
== SEM_STAT
) {
1111 sma
= sem_obtain_object(ns
, semid
);
1116 id
= sma
->sem_perm
.id
;
1118 sma
= sem_obtain_object_check(ns
, semid
);
1126 if (ipcperms(ns
, &sma
->sem_perm
, S_IRUGO
))
1129 err
= security_sem_semctl(sma
, cmd
);
1133 kernel_to_ipc64_perm(&sma
->sem_perm
, &tbuf
.sem_perm
);
1134 tbuf
.sem_otime
= sma
->sem_otime
;
1135 tbuf
.sem_ctime
= sma
->sem_ctime
;
1136 tbuf
.sem_nsems
= sma
->sem_nsems
;
1138 if (copy_semid_to_user(p
, &tbuf
, version
))
1150 static int semctl_setval(struct ipc_namespace
*ns
, int semid
, int semnum
,
1153 struct sem_undo
*un
;
1154 struct sem_array
*sma
;
1157 struct list_head tasks
;
1159 #if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
1160 /* big-endian 64bit */
1163 /* 32bit or little-endian 64bit */
1167 if (val
> SEMVMX
|| val
< 0)
1170 INIT_LIST_HEAD(&tasks
);
1173 sma
= sem_obtain_object_check(ns
, semid
);
1176 return PTR_ERR(sma
);
1179 if (semnum
< 0 || semnum
>= sma
->sem_nsems
) {
1185 if (ipcperms(ns
, &sma
->sem_perm
, S_IWUGO
)) {
1190 err
= security_sem_semctl(sma
, SETVAL
);
1196 sem_lock(sma
, NULL
, -1);
1198 curr
= &sma
->sem_base
[semnum
];
1200 ipc_assert_locked_object(&sma
->sem_perm
);
1201 list_for_each_entry(un
, &sma
->list_id
, list_id
)
1202 un
->semadj
[semnum
] = 0;
1205 curr
->sempid
= task_tgid_vnr(current
);
1206 sma
->sem_ctime
= get_seconds();
1207 /* maybe some queued-up processes were waiting for this */
1208 do_smart_update(sma
, NULL
, 0, 0, &tasks
);
1209 sem_unlock(sma
, -1);
1211 wake_up_sem_queue_do(&tasks
);
1215 static int semctl_main(struct ipc_namespace
*ns
, int semid
, int semnum
,
1216 int cmd
, void __user
*p
)
1218 struct sem_array
*sma
;
1221 ushort fast_sem_io
[SEMMSL_FAST
];
1222 ushort
* sem_io
= fast_sem_io
;
1223 struct list_head tasks
;
1225 INIT_LIST_HEAD(&tasks
);
1228 sma
= sem_obtain_object_check(ns
, semid
);
1231 return PTR_ERR(sma
);
1234 nsems
= sma
->sem_nsems
;
1237 if (ipcperms(ns
, &sma
->sem_perm
, cmd
== SETALL
? S_IWUGO
: S_IRUGO
))
1238 goto out_rcu_wakeup
;
1240 err
= security_sem_semctl(sma
, cmd
);
1242 goto out_rcu_wakeup
;
1248 ushort __user
*array
= p
;
1251 sem_lock(sma
, NULL
, -1);
1252 if(nsems
> SEMMSL_FAST
) {
1253 if (!ipc_rcu_getref(sma
)) {
1254 sem_unlock(sma
, -1);
1259 sem_unlock(sma
, -1);
1261 sem_io
= ipc_alloc(sizeof(ushort
)*nsems
);
1262 if(sem_io
== NULL
) {
1268 sem_lock_and_putref(sma
);
1269 if (sma
->sem_perm
.deleted
) {
1270 sem_unlock(sma
, -1);
1276 for (i
= 0; i
< sma
->sem_nsems
; i
++)
1277 sem_io
[i
] = sma
->sem_base
[i
].semval
;
1278 sem_unlock(sma
, -1);
1281 if(copy_to_user(array
, sem_io
, nsems
*sizeof(ushort
)))
1288 struct sem_undo
*un
;
1290 if (!ipc_rcu_getref(sma
)) {
1296 if(nsems
> SEMMSL_FAST
) {
1297 sem_io
= ipc_alloc(sizeof(ushort
)*nsems
);
1298 if(sem_io
== NULL
) {
1304 if (copy_from_user (sem_io
, p
, nsems
*sizeof(ushort
))) {
1310 for (i
= 0; i
< nsems
; i
++) {
1311 if (sem_io
[i
] > SEMVMX
) {
1318 sem_lock_and_putref(sma
);
1319 if (sma
->sem_perm
.deleted
) {
1320 sem_unlock(sma
, -1);
1326 for (i
= 0; i
< nsems
; i
++)
1327 sma
->sem_base
[i
].semval
= sem_io
[i
];
1329 ipc_assert_locked_object(&sma
->sem_perm
);
1330 list_for_each_entry(un
, &sma
->list_id
, list_id
) {
1331 for (i
= 0; i
< nsems
; i
++)
1334 sma
->sem_ctime
= get_seconds();
1335 /* maybe some queued-up processes were waiting for this */
1336 do_smart_update(sma
, NULL
, 0, 0, &tasks
);
1340 /* GETVAL, GETPID, GETNCTN, GETZCNT: fall-through */
1343 if (semnum
< 0 || semnum
>= nsems
)
1344 goto out_rcu_wakeup
;
1346 sem_lock(sma
, NULL
, -1);
1347 curr
= &sma
->sem_base
[semnum
];
1357 err
= count_semncnt(sma
,semnum
);
1360 err
= count_semzcnt(sma
,semnum
);
1365 sem_unlock(sma
, -1);
1368 wake_up_sem_queue_do(&tasks
);
1370 if(sem_io
!= fast_sem_io
)
1371 ipc_free(sem_io
, sizeof(ushort
)*nsems
);
1375 static inline unsigned long
1376 copy_semid_from_user(struct semid64_ds
*out
, void __user
*buf
, int version
)
1380 if (copy_from_user(out
, buf
, sizeof(*out
)))
1385 struct semid_ds tbuf_old
;
1387 if(copy_from_user(&tbuf_old
, buf
, sizeof(tbuf_old
)))
1390 out
->sem_perm
.uid
= tbuf_old
.sem_perm
.uid
;
1391 out
->sem_perm
.gid
= tbuf_old
.sem_perm
.gid
;
1392 out
->sem_perm
.mode
= tbuf_old
.sem_perm
.mode
;
1402 * This function handles some semctl commands which require the rw_mutex
1403 * to be held in write mode.
1404 * NOTE: no locks must be held, the rw_mutex is taken inside this function.
1406 static int semctl_down(struct ipc_namespace
*ns
, int semid
,
1407 int cmd
, int version
, void __user
*p
)
1409 struct sem_array
*sma
;
1411 struct semid64_ds semid64
;
1412 struct kern_ipc_perm
*ipcp
;
1414 if(cmd
== IPC_SET
) {
1415 if (copy_semid_from_user(&semid64
, p
, version
))
1419 down_write(&sem_ids(ns
).rw_mutex
);
1422 ipcp
= ipcctl_pre_down_nolock(ns
, &sem_ids(ns
), semid
, cmd
,
1423 &semid64
.sem_perm
, 0);
1425 err
= PTR_ERR(ipcp
);
1429 sma
= container_of(ipcp
, struct sem_array
, sem_perm
);
1431 err
= security_sem_semctl(sma
, cmd
);
1437 sem_lock(sma
, NULL
, -1);
1438 /* freeary unlocks the ipc object and rcu */
1442 sem_lock(sma
, NULL
, -1);
1443 err
= ipc_update_perm(&semid64
.sem_perm
, ipcp
);
1446 sma
->sem_ctime
= get_seconds();
1454 sem_unlock(sma
, -1);
1458 up_write(&sem_ids(ns
).rw_mutex
);
1462 SYSCALL_DEFINE4(semctl
, int, semid
, int, semnum
, int, cmd
, unsigned long, arg
)
1465 struct ipc_namespace
*ns
;
1466 void __user
*p
= (void __user
*)arg
;
1471 version
= ipc_parse_version(&cmd
);
1472 ns
= current
->nsproxy
->ipc_ns
;
1479 return semctl_nolock(ns
, semid
, cmd
, version
, p
);
1486 return semctl_main(ns
, semid
, semnum
, cmd
, p
);
1488 return semctl_setval(ns
, semid
, semnum
, arg
);
1491 return semctl_down(ns
, semid
, cmd
, version
, p
);
1497 /* If the task doesn't already have a undo_list, then allocate one
1498 * here. We guarantee there is only one thread using this undo list,
1499 * and current is THE ONE
1501 * If this allocation and assignment succeeds, but later
1502 * portions of this code fail, there is no need to free the sem_undo_list.
1503 * Just let it stay associated with the task, and it'll be freed later
1506 * This can block, so callers must hold no locks.
1508 static inline int get_undo_list(struct sem_undo_list
**undo_listp
)
1510 struct sem_undo_list
*undo_list
;
1512 undo_list
= current
->sysvsem
.undo_list
;
1514 undo_list
= kzalloc(sizeof(*undo_list
), GFP_KERNEL
);
1515 if (undo_list
== NULL
)
1517 spin_lock_init(&undo_list
->lock
);
1518 atomic_set(&undo_list
->refcnt
, 1);
1519 INIT_LIST_HEAD(&undo_list
->list_proc
);
1521 current
->sysvsem
.undo_list
= undo_list
;
1523 *undo_listp
= undo_list
;
1527 static struct sem_undo
*__lookup_undo(struct sem_undo_list
*ulp
, int semid
)
1529 struct sem_undo
*un
;
1531 list_for_each_entry_rcu(un
, &ulp
->list_proc
, list_proc
) {
1532 if (un
->semid
== semid
)
1538 static struct sem_undo
*lookup_undo(struct sem_undo_list
*ulp
, int semid
)
1540 struct sem_undo
*un
;
1542 assert_spin_locked(&ulp
->lock
);
1544 un
= __lookup_undo(ulp
, semid
);
1546 list_del_rcu(&un
->list_proc
);
1547 list_add_rcu(&un
->list_proc
, &ulp
->list_proc
);
1553 * find_alloc_undo - Lookup (and if not present create) undo array
1555 * @semid: semaphore array id
1557 * The function looks up (and if not present creates) the undo structure.
1558 * The size of the undo structure depends on the size of the semaphore
1559 * array, thus the alloc path is not that straightforward.
1560 * Lifetime-rules: sem_undo is rcu-protected, on success, the function
1561 * performs a rcu_read_lock().
1563 static struct sem_undo
*find_alloc_undo(struct ipc_namespace
*ns
, int semid
)
1565 struct sem_array
*sma
;
1566 struct sem_undo_list
*ulp
;
1567 struct sem_undo
*un
, *new;
1570 error
= get_undo_list(&ulp
);
1572 return ERR_PTR(error
);
1575 spin_lock(&ulp
->lock
);
1576 un
= lookup_undo(ulp
, semid
);
1577 spin_unlock(&ulp
->lock
);
1578 if (likely(un
!=NULL
))
1581 /* no undo structure around - allocate one. */
1582 /* step 1: figure out the size of the semaphore array */
1583 sma
= sem_obtain_object_check(ns
, semid
);
1586 return ERR_CAST(sma
);
1589 nsems
= sma
->sem_nsems
;
1590 if (!ipc_rcu_getref(sma
)) {
1592 un
= ERR_PTR(-EIDRM
);
1597 /* step 2: allocate new undo structure */
1598 new = kzalloc(sizeof(struct sem_undo
) + sizeof(short)*nsems
, GFP_KERNEL
);
1601 return ERR_PTR(-ENOMEM
);
1604 /* step 3: Acquire the lock on semaphore array */
1606 sem_lock_and_putref(sma
);
1607 if (sma
->sem_perm
.deleted
) {
1608 sem_unlock(sma
, -1);
1611 un
= ERR_PTR(-EIDRM
);
1614 spin_lock(&ulp
->lock
);
1617 * step 4: check for races: did someone else allocate the undo struct?
1619 un
= lookup_undo(ulp
, semid
);
1624 /* step 5: initialize & link new undo structure */
1625 new->semadj
= (short *) &new[1];
1628 assert_spin_locked(&ulp
->lock
);
1629 list_add_rcu(&new->list_proc
, &ulp
->list_proc
);
1630 ipc_assert_locked_object(&sma
->sem_perm
);
1631 list_add(&new->list_id
, &sma
->list_id
);
1635 spin_unlock(&ulp
->lock
);
1636 sem_unlock(sma
, -1);
1643 * get_queue_result - Retrieve the result code from sem_queue
1644 * @q: Pointer to queue structure
1646 * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
1647 * q->status, then we must loop until the value is replaced with the final
1648 * value: This may happen if a task is woken up by an unrelated event (e.g.
1649 * signal) and in parallel the task is woken up by another task because it got
1650 * the requested semaphores.
1652 * The function can be called with or without holding the semaphore spinlock.
1654 static int get_queue_result(struct sem_queue
*q
)
1659 while (unlikely(error
== IN_WAKEUP
)) {
1668 SYSCALL_DEFINE4(semtimedop
, int, semid
, struct sembuf __user
*, tsops
,
1669 unsigned, nsops
, const struct timespec __user
*, timeout
)
1671 int error
= -EINVAL
;
1672 struct sem_array
*sma
;
1673 struct sembuf fast_sops
[SEMOPM_FAST
];
1674 struct sembuf
* sops
= fast_sops
, *sop
;
1675 struct sem_undo
*un
;
1676 int undos
= 0, alter
= 0, max
, locknum
;
1677 struct sem_queue queue
;
1678 unsigned long jiffies_left
= 0;
1679 struct ipc_namespace
*ns
;
1680 struct list_head tasks
;
1682 ns
= current
->nsproxy
->ipc_ns
;
1684 if (nsops
< 1 || semid
< 0)
1686 if (nsops
> ns
->sc_semopm
)
1688 if(nsops
> SEMOPM_FAST
) {
1689 sops
= kmalloc(sizeof(*sops
)*nsops
,GFP_KERNEL
);
1693 if (copy_from_user (sops
, tsops
, nsops
* sizeof(*tsops
))) {
1698 struct timespec _timeout
;
1699 if (copy_from_user(&_timeout
, timeout
, sizeof(*timeout
))) {
1703 if (_timeout
.tv_sec
< 0 || _timeout
.tv_nsec
< 0 ||
1704 _timeout
.tv_nsec
>= 1000000000L) {
1708 jiffies_left
= timespec_to_jiffies(&_timeout
);
1711 for (sop
= sops
; sop
< sops
+ nsops
; sop
++) {
1712 if (sop
->sem_num
>= max
)
1714 if (sop
->sem_flg
& SEM_UNDO
)
1716 if (sop
->sem_op
!= 0)
1720 INIT_LIST_HEAD(&tasks
);
1723 /* On success, find_alloc_undo takes the rcu_read_lock */
1724 un
= find_alloc_undo(ns
, semid
);
1726 error
= PTR_ERR(un
);
1734 sma
= sem_obtain_object_check(ns
, semid
);
1737 error
= PTR_ERR(sma
);
1742 if (max
>= sma
->sem_nsems
)
1743 goto out_rcu_wakeup
;
1746 if (ipcperms(ns
, &sma
->sem_perm
, alter
? S_IWUGO
: S_IRUGO
))
1747 goto out_rcu_wakeup
;
1749 error
= security_sem_semop(sma
, sops
, nsops
, alter
);
1751 goto out_rcu_wakeup
;
1754 * semid identifiers are not unique - find_alloc_undo may have
1755 * allocated an undo structure, it was invalidated by an RMID
1756 * and now a new array with received the same id. Check and fail.
1757 * This case can be detected checking un->semid. The existence of
1758 * "un" itself is guaranteed by rcu.
1761 locknum
= sem_lock(sma
, sops
, nsops
);
1762 if (un
&& un
->semid
== -1)
1763 goto out_unlock_free
;
1765 error
= try_atomic_semop (sma
, sops
, nsops
, un
, task_tgid_vnr(current
));
1767 if (alter
&& error
== 0)
1768 do_smart_update(sma
, sops
, nsops
, 1, &tasks
);
1770 goto out_unlock_free
;
1773 /* We need to sleep on this operation, so we put the current
1774 * task into the pending queue and go to sleep.
1778 queue
.nsops
= nsops
;
1780 queue
.pid
= task_tgid_vnr(current
);
1781 queue
.alter
= alter
;
1785 curr
= &sma
->sem_base
[sops
->sem_num
];
1788 if (sma
->complex_count
) {
1789 list_add_tail(&queue
.list
,
1790 &sma
->pending_alter
);
1793 list_add_tail(&queue
.list
,
1794 &curr
->pending_alter
);
1797 list_add_tail(&queue
.list
, &curr
->pending_const
);
1800 if (!sma
->complex_count
)
1804 list_add_tail(&queue
.list
, &sma
->pending_alter
);
1806 list_add_tail(&queue
.list
, &sma
->pending_const
);
1808 sma
->complex_count
++;
1811 queue
.status
= -EINTR
;
1812 queue
.sleeper
= current
;
1815 current
->state
= TASK_INTERRUPTIBLE
;
1816 sem_unlock(sma
, locknum
);
1820 jiffies_left
= schedule_timeout(jiffies_left
);
1824 error
= get_queue_result(&queue
);
1826 if (error
!= -EINTR
) {
1827 /* fast path: update_queue already obtained all requested
1829 * Perform a smp_mb(): User space could assume that semop()
1830 * is a memory barrier: Without the mb(), the cpu could
1831 * speculatively read in user space stale data that was
1832 * overwritten by the previous owner of the semaphore.
1840 sma
= sem_obtain_lock(ns
, semid
, sops
, nsops
, &locknum
);
1843 * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
1845 error
= get_queue_result(&queue
);
1848 * Array removed? If yes, leave without sem_unlock().
1857 * If queue.status != -EINTR we are woken up by another process.
1858 * Leave without unlink_queue(), but with sem_unlock().
1861 if (error
!= -EINTR
) {
1862 goto out_unlock_free
;
1866 * If an interrupt occurred we have to clean up the queue
1868 if (timeout
&& jiffies_left
== 0)
1872 * If the wakeup was spurious, just retry
1874 if (error
== -EINTR
&& !signal_pending(current
))
1877 unlink_queue(sma
, &queue
);
1880 sem_unlock(sma
, locknum
);
1883 wake_up_sem_queue_do(&tasks
);
1885 if(sops
!= fast_sops
)
1890 SYSCALL_DEFINE3(semop
, int, semid
, struct sembuf __user
*, tsops
,
1893 return sys_semtimedop(semid
, tsops
, nsops
, NULL
);
1896 /* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between
1897 * parent and child tasks.
1900 int copy_semundo(unsigned long clone_flags
, struct task_struct
*tsk
)
1902 struct sem_undo_list
*undo_list
;
1905 if (clone_flags
& CLONE_SYSVSEM
) {
1906 error
= get_undo_list(&undo_list
);
1909 atomic_inc(&undo_list
->refcnt
);
1910 tsk
->sysvsem
.undo_list
= undo_list
;
1912 tsk
->sysvsem
.undo_list
= NULL
;
1918 * add semadj values to semaphores, free undo structures.
1919 * undo structures are not freed when semaphore arrays are destroyed
1920 * so some of them may be out of date.
1921 * IMPLEMENTATION NOTE: There is some confusion over whether the
1922 * set of adjustments that needs to be done should be done in an atomic
1923 * manner or not. That is, if we are attempting to decrement the semval
1924 * should we queue up and wait until we can do so legally?
1925 * The original implementation attempted to do this (queue and wait).
1926 * The current implementation does not do so. The POSIX standard
1927 * and SVID should be consulted to determine what behavior is mandated.
1929 void exit_sem(struct task_struct
*tsk
)
1931 struct sem_undo_list
*ulp
;
1933 ulp
= tsk
->sysvsem
.undo_list
;
1936 tsk
->sysvsem
.undo_list
= NULL
;
1938 if (!atomic_dec_and_test(&ulp
->refcnt
))
1942 struct sem_array
*sma
;
1943 struct sem_undo
*un
;
1944 struct list_head tasks
;
1948 un
= list_entry_rcu(ulp
->list_proc
.next
,
1949 struct sem_undo
, list_proc
);
1950 if (&un
->list_proc
== &ulp
->list_proc
)
1960 sma
= sem_obtain_object_check(tsk
->nsproxy
->ipc_ns
, un
->semid
);
1961 /* exit_sem raced with IPC_RMID, nothing to do */
1967 sem_lock(sma
, NULL
, -1);
1968 un
= __lookup_undo(ulp
, semid
);
1970 /* exit_sem raced with IPC_RMID+semget() that created
1971 * exactly the same semid. Nothing to do.
1973 sem_unlock(sma
, -1);
1978 /* remove un from the linked lists */
1979 ipc_assert_locked_object(&sma
->sem_perm
);
1980 list_del(&un
->list_id
);
1982 spin_lock(&ulp
->lock
);
1983 list_del_rcu(&un
->list_proc
);
1984 spin_unlock(&ulp
->lock
);
1986 /* perform adjustments registered in un */
1987 for (i
= 0; i
< sma
->sem_nsems
; i
++) {
1988 struct sem
* semaphore
= &sma
->sem_base
[i
];
1989 if (un
->semadj
[i
]) {
1990 semaphore
->semval
+= un
->semadj
[i
];
1992 * Range checks of the new semaphore value,
1993 * not defined by sus:
1994 * - Some unices ignore the undo entirely
1995 * (e.g. HP UX 11i 11.22, Tru64 V5.1)
1996 * - some cap the value (e.g. FreeBSD caps
1997 * at 0, but doesn't enforce SEMVMX)
1999 * Linux caps the semaphore value, both at 0
2002 * Manfred <manfred@colorfullife.com>
2004 if (semaphore
->semval
< 0)
2005 semaphore
->semval
= 0;
2006 if (semaphore
->semval
> SEMVMX
)
2007 semaphore
->semval
= SEMVMX
;
2008 semaphore
->sempid
= task_tgid_vnr(current
);
2011 /* maybe some queued-up processes were waiting for this */
2012 INIT_LIST_HEAD(&tasks
);
2013 do_smart_update(sma
, NULL
, 0, 1, &tasks
);
2014 sem_unlock(sma
, -1);
2016 wake_up_sem_queue_do(&tasks
);
2023 #ifdef CONFIG_PROC_FS
2024 static int sysvipc_sem_proc_show(struct seq_file
*s
, void *it
)
2026 struct user_namespace
*user_ns
= seq_user_ns(s
);
2027 struct sem_array
*sma
= it
;
2029 return seq_printf(s
,
2030 "%10d %10d %4o %10u %5u %5u %5u %5u %10lu %10lu\n",
2035 from_kuid_munged(user_ns
, sma
->sem_perm
.uid
),
2036 from_kgid_munged(user_ns
, sma
->sem_perm
.gid
),
2037 from_kuid_munged(user_ns
, sma
->sem_perm
.cuid
),
2038 from_kgid_munged(user_ns
, sma
->sem_perm
.cgid
),