blackfin architecture
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / asm-blackfin / mach-bf561 / bfin_serial_5xx.h
1 #include <linux/serial.h>
2 #include <asm/dma.h>
3
4 #define NR_PORTS 1
5
6 #define OFFSET_THR 0x00 /* Transmit Holding register */
7 #define OFFSET_RBR 0x00 /* Receive Buffer register */
8 #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
9 #define OFFSET_IER 0x04 /* Interrupt Enable Register */
10 #define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
11 #define OFFSET_IIR 0x08 /* Interrupt Identification Register */
12 #define OFFSET_LCR 0x0C /* Line Control Register */
13 #define OFFSET_MCR 0x10 /* Modem Control Register */
14 #define OFFSET_LSR 0x14 /* Line Status Register */
15 #define OFFSET_MSR 0x18 /* Modem Status Register */
16 #define OFFSET_SCR 0x1C /* SCR Scratch Register */
17 #define OFFSET_GCTL 0x24 /* Global Control Register */
18
19 #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
20 #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
21 #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
22 #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
23 #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
24 #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
25 #define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
26 #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
27
28 #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
29 #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
30 #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
31 #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
32 #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
33 #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
34
35 #ifdef CONFIG_BFIN_UART0_CTSRTS
36 # define CONFIG_SERIAL_BFIN_CTSRTS
37 # ifndef CONFIG_UART0_CTS_PIN
38 # define CONFIG_UART0_CTS_PIN -1
39 # endif
40 # ifndef CONFIG_UART0_RTS_PIN
41 # define CONFIG_UART0_RTS_PIN -1
42 # endif
43 #endif
44
45 struct bfin_serial_port {
46 struct uart_port port;
47 unsigned int old_status;
48 #ifdef CONFIG_SERIAL_BFIN_DMA
49 int tx_done;
50 int tx_count;
51 struct circ_buf rx_dma_buf;
52 struct timer_list rx_dma_timer;
53 int rx_dma_nrows;
54 unsigned int tx_dma_channel;
55 unsigned int rx_dma_channel;
56 struct work_struct tx_dma_workqueue;
57 #else
58 struct work_struct cts_workqueue;
59 #endif
60 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
61 int cts_pin;
62 int rts_pin;
63 #endif
64 };
65
66 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
67 struct bfin_serial_res {
68 unsigned long uart_base_addr;
69 int uart_irq;
70 #ifdef CONFIG_SERIAL_BFIN_DMA
71 unsigned int uart_tx_dma_channel;
72 unsigned int uart_rx_dma_channel;
73 #endif
74 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
75 int uart_cts_pin;
76 int uart_rts_pin;
77 #endif
78 };
79
80 struct bfin_serial_res bfin_serial_resource[] = {
81 0xFFC00400,
82 IRQ_UART_RX,
83 #ifdef CONFIG_SERIAL_BFIN_DMA
84 CH_UART_TX,
85 CH_UART_RX,
86 #endif
87 #ifdef CONFIG_BFIN_UART0_CTSRTS
88 CONFIG_UART0_CTS_PIN,
89 CONFIG_UART0_RTS_PIN,
90 #endif
91 };
92
93
94 int nr_ports = NR_PORTS;
95 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
96 {
97
98 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
99 if (uart->cts_pin >= 0) {
100 gpio_request(uart->cts_pin, NULL);
101 gpio_direction_input(uart->cts_pin);
102 }
103 if (uart->rts_pin >= 0) {
104 gpio_request(uart->rts_pin, NULL);
105 gpio_direction_input(uart->rts_pin);
106 }
107 #endif
108 }