drivers/video/Kconfig

   1 #
   2 # Video configuration
   3 #
   4
   5 menu "Graphics support"
   6
   7 config FB
   8         tristate "Support for frame buffer devices"
   9         ---help---
  10           The frame buffer device provides an abstraction for the graphics
  11           hardware. It represents the frame buffer of some video hardware and
  12           allows application software to access the graphics hardware through
  13           a well-defined interface, so the software doesn't need to know
  14           anything about the low-level (hardware register) stuff.
  15
  16           Frame buffer devices work identically across the different
  17           architectures supported by Linux and make the implementation of
  18           application programs easier and more portable; at this point, an X
  19           server exists which uses the frame buffer device exclusively.
  20           On several non-X86 architectures, the frame buffer device is the
  21           only way to use the graphics hardware.
  22
  23           The device is accessed through special device nodes, usually located
  24           in the /dev directory, i.e. /dev/fb*.
  25
  26           You need an utility program called fbset to make full use of frame
  27           buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
  28           and the Framebuffer-HOWTO at
  29           <http://www.tahallah.demon.co.uk/programming/prog.html> for more
  30           information.
  31
  32           Say Y here and to the driver for your graphics board below if you
  33           are compiling a kernel for a non-x86 architecture.
  34
  35           If you are compiling for the x86 architecture, you can say Y if you
  36           want to play with it, but it is not essential. Please note that
  37           running graphical applications that directly touch the hardware
  38           (e.g. an accelerated X server) and that are not frame buffer
  39           device-aware may cause unexpected results. If unsure, say N.
  40
  41 config FB_CFB_FILLRECT
  42         tristate
  43         depends on FB
  44         default n
  45         ---help---
  46           Include the cfb_fillrect function for generic software rectangle
  47           filling. This is used by drivers that don't provide their own
  48           (accelerated) version.
  49
  50 config FB_CFB_COPYAREA
  51         tristate
  52         depends on FB
  53         default n
  54         ---help---
  55           Include the cfb_copyarea function for generic software area copying.
  56           This is used by drivers that don't provide their own (accelerated)
  57           version.
  58
  59 config FB_CFB_IMAGEBLIT
  60         tristate
  61         depends on FB
  62         default n
  63         ---help---
  64           Include the cfb_imageblit function for generic software image
  65           blitting. This is used by drivers that don't provide their own
  66           (accelerated) version.
  67
  68 config FB_SOFT_CURSOR
  69         tristate
  70         depends on FB
  71         default n
  72         ---help---
  73           Include the soft_cursor function for generic software cursor support.
  74           This is used by drivers that don't provide their own (accelerated)
  75           version.
  76
  77 config FB_MACMODES
  78        tristate
  79        depends on FB
  80        default n
  81
  82 config FB_MODE_HELPERS
  83         bool "Enable Video Mode Handling Helpers"
  84         depends on FB
  85         default n
  86         ---help---
  87           This enables functions for handling video modes using the
  88           Generalized Timing Formula and the EDID parser. A few drivers rely
  89           on this feature such as the radeonfb, rivafb, and the i810fb. If
  90           your driver does not take advantage of this feature, choosing Y will
  91           just increase the kernel size by about 5K.
  92
  93 config FB_TILEBLITTING
  94        bool "Enable Tile Blitting Support"
  95        depends on FB
  96        default n
  97        ---help---
  98          This enables tile blitting.  Tile blitting is a drawing technique
  99          where the screen is divided into rectangular sections (tiles), whereas
 100          the standard blitting divides the screen into pixels. Because the
 101          default drawing element is a tile, drawing functions will be passed
 102          parameters in terms of number of tiles instead of number of pixels.
 103          For example, to draw a single character, instead of using bitmaps,
 104          an index to an array of bitmaps will be used.  To clear or move a
 105          rectangular section of a screen, the rectangle will be described in
 106          terms of number of tiles in the x- and y-axis.
 107
 108          This is particularly important to one driver, matroxfb.  If
 109          unsure, say N.
 110
 111 config FB_CIRRUS
 112         tristate "Cirrus Logic support"
 113         depends on FB && (ZORRO || PCI)
 114         select FB_CFB_FILLRECT
 115         select FB_CFB_COPYAREA
 116         select FB_CFB_IMAGEBLIT
 117         select FB_SOFT_CURSOR
 118         ---help---
 119           This enables support for Cirrus Logic GD542x/543x based boards on
 120           Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
 121
 122           If you have a PCI-based system, this enables support for these
 123           chips: GD-543x, GD-544x, GD-5480.
 124
 125           Please read the file <file:Documentation/fb/cirrusfb.txt>.
 126
 127           Say N unless you have such a graphics board or plan to get one
 128           before you next recompile the kernel.
 129
 130 config FB_PM2
 131         tristate "Permedia2 support"
 132         depends on FB && ((AMIGA && BROKEN) || PCI)
 133         select FB_CFB_FILLRECT
 134         select FB_CFB_COPYAREA
 135         select FB_CFB_IMAGEBLIT
 136         select FB_SOFT_CURSOR
 137         help
 138           This is the frame buffer device driver for the Permedia2 AGP frame
 139           buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
 140           product page at
 141           <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
 142
 143 config FB_PM2_FIFO_DISCONNECT
 144         bool "enable FIFO disconnect feature"
 145         depends on FB_PM2 && PCI
 146         help
 147           Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
 148
 149 config FB_ARMCLCD
 150         tristate "ARM PrimeCell PL110 support"
 151         depends on FB && ARM && ARM_AMBA
 152         select FB_CFB_FILLRECT
 153         select FB_CFB_COPYAREA
 154         select FB_CFB_IMAGEBLIT
 155         select FB_SOFT_CURSOR
 156         help
 157           This framebuffer device driver is for the ARM PrimeCell PL110
 158           Colour LCD controller.  ARM PrimeCells provide the building
 159           blocks for System on a Chip devices.
 160
 161           If you want to compile this as a module (=code which can be
 162           inserted into and removed from the running kernel), say M
 163           here and read <file:Documentation/modules.txt>.  The module
 164           will be called amba-clcd.
 165
 166 config FB_ACORN
 167         bool "Acorn VIDC support"
 168         depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
 169         select FB_CFB_FILLRECT
 170         select FB_CFB_COPYAREA
 171         select FB_CFB_IMAGEBLIT
 172         select FB_SOFT_CURSOR
 173         help
 174           This is the frame buffer device driver for the Acorn VIDC graphics
 175           hardware found in Acorn RISC PCs and other ARM-based machines.  If
 176           unsure, say N.
 177
 178 config FB_CLPS711X
 179         bool "CLPS711X LCD support"
 180         depends on (FB = y) && ARM && ARCH_CLPS711X
 181         select FB_CFB_FILLRECT
 182         select FB_CFB_COPYAREA
 183         select FB_CFB_IMAGEBLIT
 184         select FB_SOFT_CURSOR
 185
 186 config FB_SA1100
 187         bool "SA-1100 LCD support"
 188         depends on (FB = y) && ARM && ARCH_SA1100
 189         select FB_CFB_FILLRECT
 190         select FB_CFB_COPYAREA
 191         select FB_CFB_IMAGEBLIT
 192         select FB_SOFT_CURSOR
 193         help
 194           This is a framebuffer device for the SA-1100 LCD Controller.
 195           See <http://www.linux-fbdev.org/> for information on framebuffer
 196           devices.
 197
 198           If you plan to use the LCD display with your SA-1100 system, say
 199           Y here.
 200
 201 config FB_IMX
 202         tristate "Motorola i.MX LCD support"
 203         depends on FB && ARM && ARCH_IMX
 204         select FB_CFB_FILLRECT
 205         select FB_CFB_COPYAREA
 206         select FB_CFB_IMAGEBLIT
 207         select FB_SOFT_CURSOR
 208
 209 config FB_CYBER2000
 210         tristate "CyberPro 2000/2010/5000 support"
 211         depends on FB && PCI && (BROKEN || !SPARC64)
 212         select FB_CFB_FILLRECT
 213         select FB_CFB_COPYAREA
 214         select FB_CFB_IMAGEBLIT
 215         select FB_SOFT_CURSOR
 216         help
 217           This enables support for the Integraphics CyberPro 20x0 and 5000
 218           VGA chips used in the Rebel.com Netwinder and other machines.
 219           Say Y if you have a NetWinder or a graphics card containing this
 220           device, otherwise say N.
 221
 222 config FB_APOLLO
 223         bool
 224         depends on (FB = y) && APOLLO
 225         default y
 226         select FB_CFB_FILLRECT
 227         select FB_CFB_IMAGEBLIT
 228         select FB_SOFT_CURSOR
 229
 230 config FB_Q40
 231         bool
 232         depends on (FB = y) && Q40
 233         default y
 234         select FB_CFB_FILLRECT
 235         select FB_CFB_COPYAREA
 236         select FB_CFB_IMAGEBLIT
 237         select FB_SOFT_CURSOR
 238
 239 config FB_AMIGA
 240         tristate "Amiga native chipset support"
 241         depends on FB && AMIGA
 242         select FB_SOFT_CURSOR
 243         help
 244           This is the frame buffer device driver for the builtin graphics
 245           chipset found in Amigas.
 246
 247           To compile this driver as a module, choose M here: the
 248           module will be called amifb.
 249
 250 config FB_AMIGA_OCS
 251         bool "Amiga OCS chipset support"
 252         depends on FB_AMIGA
 253         help
 254           This enables support for the original Agnus and Denise video chips,
 255           found in the Amiga 1000 and most A500's and A2000's. If you intend
 256           to run Linux on any of these systems, say Y; otherwise say N.
 257
 258 config FB_AMIGA_ECS
 259         bool "Amiga ECS chipset support"
 260         depends on FB_AMIGA
 261         help
 262           This enables support for the Enhanced Chip Set, found in later
 263           A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
 264           you intend to run Linux on any of these systems, say Y; otherwise
 265           say N.
 266
 267 config FB_AMIGA_AGA
 268         bool "Amiga AGA chipset support"
 269         depends on FB_AMIGA
 270         help
 271           This enables support for the Advanced Graphics Architecture (also
 272           known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
 273           and CD32. If you intend to run Linux on any of these systems, say Y;
 274           otherwise say N.
 275
 276 config FB_CYBER
 277         tristate "Amiga CyberVision 64 support"
 278         depends on FB && ZORRO && BROKEN
 279         select FB_CFB_FILLRECT
 280         select FB_CFB_COPYAREA
 281         select FB_CFB_IMAGEBLIT
 282         select FB_SOFT_CURSOR
 283         help
 284           This enables support for the Cybervision 64 graphics card from
 285           Phase5. Please note that its use is not all that intuitive (i.e. if
 286           you have any questions, be sure to ask!). Say N unless you have a
 287           Cybervision 64 or plan to get one before you next recompile the
 288           kernel. Please note that this driver DOES NOT support the
 289           Cybervision 64/3D card, as they use incompatible video chips.
 290
 291 config FB_VIRGE
 292         bool "Amiga CyberVision 64/3D support "
 293         depends on (FB = y) && ZORRO && BROKEN
 294         select FB_CFB_FILLRECT
 295         select FB_CFB_COPYAREA
 296         select FB_CFB_IMAGEBLIT
 297         select FB_SOFT_CURSOR
 298         help
 299           This enables support for the Cybervision 64/3D graphics card from
 300           Phase5. Please note that its use is not all that intuitive (i.e. if
 301           you have any questions, be sure to ask!). Say N unless you have a
 302           Cybervision 64/3D or plan to get one before you next recompile the
 303           kernel. Please note that this driver DOES NOT support the older
 304           Cybervision 64 card, as they use incompatible video chips.
 305
 306 config FB_RETINAZ3
 307         tristate "Amiga Retina Z3 support"
 308         depends on (FB = y) && ZORRO && BROKEN
 309         help
 310           This enables support for the Retina Z3 graphics card. Say N unless
 311           you have a Retina Z3 or plan to get one before you next recompile
 312           the kernel.
 313
 314 config FB_FM2
 315         bool "Amiga FrameMaster II/Rainbow II support"
 316         depends on (FB = y) && ZORRO
 317         select FB_CFB_FILLRECT
 318         select FB_CFB_COPYAREA
 319         select FB_CFB_IMAGEBLIT
 320         select FB_SOFT_CURSOR
 321         help
 322           This is the frame buffer device driver for the Amiga FrameMaster
 323           card from BSC (exhibited 1992 but not shipped as a CBM product).
 324
 325 config FB_ATARI
 326         bool "Atari native chipset support"
 327         depends on (FB = y) && ATARI && BROKEN
 328         help
 329           This is the frame buffer device driver for the builtin graphics
 330           chipset found in Ataris.
 331
 332 config FB_OF
 333         bool "Open Firmware frame buffer device support"
 334         depends on (FB = y) && (PPC64 || PPC_OF)
 335         select FB_CFB_FILLRECT
 336         select FB_CFB_COPYAREA
 337         select FB_CFB_IMAGEBLIT
 338         select FB_SOFT_CURSOR
 339         select FB_MACMODES
 340         help
 341           Say Y if you want support with Open Firmware for your graphics
 342           board.
 343
 344 config FB_CONTROL
 345         bool "Apple \"control\" display support"
 346         depends on (FB = y) && PPC_PMAC
 347         select FB_CFB_FILLRECT
 348         select FB_CFB_COPYAREA
 349         select FB_CFB_IMAGEBLIT
 350         select FB_SOFT_CURSOR
 351         select FB_MACMODES
 352         help
 353           This driver supports a frame buffer for the graphics adapter in the
 354           Power Macintosh 7300 and others.
 355
 356 config FB_PLATINUM
 357         bool "Apple \"platinum\" display support"
 358         depends on (FB = y) && PPC_PMAC
 359         select FB_CFB_FILLRECT
 360         select FB_CFB_COPYAREA
 361         select FB_CFB_IMAGEBLIT
 362         select FB_SOFT_CURSOR
 363         select FB_MACMODES
 364         help
 365           This driver supports a frame buffer for the "platinum" graphics
 366           adapter in some Power Macintoshes.
 367
 368 config FB_VALKYRIE
 369         bool "Apple \"valkyrie\" display support"
 370         depends on (FB = y) && (MAC || PPC_PMAC)
 371         select FB_CFB_FILLRECT
 372         select FB_CFB_COPYAREA
 373         select FB_CFB_IMAGEBLIT
 374         select FB_SOFT_CURSOR
 375         select FB_MACMODES
 376         help
 377           This driver supports a frame buffer for the "valkyrie" graphics
 378           adapter in some Power Macintoshes.
 379
 380 config FB_CT65550
 381         bool "Chips 65550 display support"
 382         depends on (FB = y) && PPC
 383         select FB_CFB_FILLRECT
 384         select FB_CFB_COPYAREA
 385         select FB_CFB_IMAGEBLIT
 386         select FB_SOFT_CURSOR
 387         help
 388           This is the frame buffer device driver for the Chips & Technologies
 389           65550 graphics chip in PowerBooks.
 390
 391 config FB_ASILIANT
 392         bool "Chips 69000 display support"
 393         depends on (FB = y) && PCI
 394         select FB_CFB_FILLRECT
 395         select FB_CFB_COPYAREA
 396         select FB_CFB_IMAGEBLIT
 397         select FB_SOFT_CURSOR
 398
 399 config FB_IMSTT
 400         bool "IMS Twin Turbo display support"
 401         depends on (FB = y) && PCI
 402         select FB_CFB_IMAGEBLIT
 403         select FB_SOFT_CURSOR
 404         select FB_MACMODES if PPC
 405         help
 406           The IMS Twin Turbo is a PCI-based frame buffer card bundled with
 407           many Macintosh and compatible computers.
 408
 409 config FB_S3TRIO
 410         bool "S3 Trio display support"
 411         depends on (FB = y) && PPC && BROKEN
 412         help
 413           If you have a S3 Trio say Y. Say N for S3 Virge.
 414
 415 config FB_VGA16
 416         tristate "VGA 16-color graphics support"
 417         depends on FB && (X86 || PPC)
 418         select FB_CFB_FILLRECT
 419         select FB_CFB_COPYAREA
 420         select FB_CFB_IMAGEBLIT
 421         select FB_SOFT_CURSOR
 422         help
 423           This is the frame buffer device driver for VGA 16 color graphic
 424           cards. Say Y if you have such a card.
 425
 426           To compile this driver as a module, choose M here: the
 427           module will be called vga16fb.
 428
 429 config FB_STI
 430         tristate "HP STI frame buffer device support"
 431         depends on FB && PARISC
 432         select FB_CFB_FILLRECT
 433         select FB_CFB_COPYAREA
 434         select FB_CFB_IMAGEBLIT
 435         select FB_SOFT_CURSOR
 436         default y
 437         ---help---
 438           STI refers to the HP "Standard Text Interface" which is a set of
 439           BIOS routines contained in a ROM chip in HP PA-RISC based machines.
 440           Enabling this option will implement the linux framebuffer device
 441           using calls to the STI BIOS routines for initialisation.
 442
 443           If you enable this option, you will get a planar framebuffer device
 444           /dev/fb which will work on the most common HP graphic cards of the
 445           NGLE family, including the artist chips (in the 7xx and Bxxx series),
 446           HCRX, HCRX24, CRX, CRX24 and VisEG series.
 447
 448           It is safe to enable this option, so you should probably say "Y".
 449
 450 config FB_MAC
 451         bool "Generic Macintosh display support"
 452         depends on (FB = y) && MAC
 453         select FB_CFB_FILLRECT
 454         select FB_CFB_COPYAREA
 455         select FB_CFB_IMAGEBLIT
 456         select FB_SOFT_CURSOR
 457         select FB_MACMODES
 458
 459 #      bool '  Apple DAFB display support' CONFIG_FB_DAFB
 460 config FB_HP300
 461         bool
 462         depends on (FB = y) && HP300
 463         select FB_CFB_FILLRECT
 464         select FB_CFB_IMAGEBLIT
 465         select FB_SOFT_CURSOR
 466         default y
 467
 468 config FB_TGA
 469         tristate "TGA framebuffer support"
 470         depends on FB && ALPHA
 471         select FB_CFB_FILLRECT
 472         select FB_CFB_COPYAREA
 473         select FB_CFB_IMAGEBLIT
 474         select FB_SOFT_CURSOR
 475         help
 476           This is the frame buffer device driver for generic TGA graphic
 477           cards. Say Y if you have one of those.
 478
 479 config FB_VESA
 480         bool "VESA VGA graphics support"
 481         depends on (FB = y) && (X86 || X86_64)
 482         select FB_CFB_FILLRECT
 483         select FB_CFB_COPYAREA
 484         select FB_CFB_IMAGEBLIT
 485         select FB_SOFT_CURSOR
 486         help
 487           This is the frame buffer device driver for generic VESA 2.0
 488           compliant graphic cards. The older VESA 1.2 cards are not supported.
 489           You will get a boot time penguin logo at no additional cost. Please
 490           read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
 491
 492 config VIDEO_SELECT
 493         bool
 494         depends on FB_VESA
 495         default y
 496
 497 config FB_HGA
 498         tristate "Hercules mono graphics support"
 499         depends on FB && X86
 500         select FB_CFB_FILLRECT
 501         select FB_CFB_COPYAREA
 502         select FB_CFB_IMAGEBLIT
 503         select FB_SOFT_CURSOR
 504         help
 505           Say Y here if you have a Hercules mono graphics card.
 506
 507           To compile this driver as a module, choose M here: the
 508           module will be called hgafb.
 509
 510           As this card technology is 15 years old, most people will answer N
 511           here.
 512
 513 config FB_HGA_ACCEL
 514         bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
 515         depends on FB_HGA && EXPERIMENTAL
 516         ---help---
 517         This will compile the Hercules mono graphics with
 518         acceleration functions.
 519
 520
 521 config VIDEO_SELECT
 522         bool
 523         depends on (FB = y) && X86
 524         default y
 525
 526 config FB_SGIVW
 527         tristate "SGI Visual Workstation framebuffer support"
 528         depends on FB && X86_VISWS
 529         select FB_CFB_FILLRECT
 530         select FB_CFB_COPYAREA
 531         select FB_CFB_IMAGEBLIT
 532         select FB_SOFT_CURSOR
 533         help
 534           SGI Visual Workstation support for framebuffer graphics.
 535
 536 config FB_GBE
 537         bool "SGI Graphics Backend frame buffer support"
 538         depends on (FB = y) && (SGI_IP32 || X86_VISWS)
 539         select FB_CFB_FILLRECT
 540         select FB_CFB_COPYAREA
 541         select FB_CFB_IMAGEBLIT
 542         select FB_SOFT_CURSOR
 543         help
 544           This is the frame buffer device driver for SGI Graphics Backend.
 545           This chip is used in SGI O2 and Visual Workstation 320/540.
 546
 547 config FB_GBE_MEM
 548         int "Video memory size in MB"
 549         depends on FB_GBE
 550         default 8
 551         help
 552           This is the amount of memory reserved for the framebuffer,
 553           which can be any value between 1MB and 8MB.
 554
 555 config BUS_I2C
 556         bool
 557         depends on (FB = y) && VISWS
 558         default y
 559
 560 config FB_SUN3
 561         bool "Sun3 framebuffer support"
 562         depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
 563
 564 config FB_BW2
 565         bool "BWtwo support"
 566         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 567         select FB_CFB_FILLRECT
 568         select FB_CFB_COPYAREA
 569         select FB_CFB_IMAGEBLIT
 570         select FB_SOFT_CURSOR
 571         help
 572           This is the frame buffer device driver for the BWtwo frame buffer.
 573
 574 config FB_CG3
 575         bool "CGthree support"
 576         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 577         select FB_CFB_COPYAREA
 578         select FB_CFB_IMAGEBLIT
 579         select FB_SOFT_CURSOR
 580         help
 581           This is the frame buffer device driver for the CGthree frame buffer.
 582
 583 config FB_CG6
 584         bool "CGsix (GX,TurboGX) support"
 585         depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 586         select FB_CFB_COPYAREA
 587         select FB_CFB_IMAGEBLIT
 588         select FB_SOFT_CURSOR
 589         help
 590           This is the frame buffer device driver for the CGsix (GX, TurboGX)
 591           frame buffer.
 592
 593 config FB_PVR2
 594         tristate "NEC PowerVR 2 display support"
 595         depends on FB && SH_DREAMCAST
 596         select FB_CFB_FILLRECT
 597         select FB_CFB_COPYAREA
 598         select FB_CFB_IMAGEBLIT
 599         select FB_SOFT_CURSOR
 600         ---help---
 601           Say Y here if you have a PowerVR 2 card in your box.  If you plan to
 602           run linux on your Dreamcast, you will have to say Y here.
 603           This driver may or may not work on other PowerVR 2 cards, but is
 604           totally untested.  Use at your own risk.  If unsure, say N.
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called pvr2fb.
 608
 609           You can pass several parameters to the driver at boot time or at
 610           module load time.  The parameters look like "video=pvr2:XXX", where
 611           the meaning of XXX can be found at the end of the main source file
 612           (<file:drivers/video/pvr2fb.c>). Please see the file
 613           <file:Documentation/fb/pvr2fb.txt>.
 614
 615 config FB_EPSON1355
 616         bool "Epson 1355 framebuffer support"
 617         depends on (FB = y) && (SUPERH || ARCH_CEIVA)
 618         select FB_CFB_FILLRECT
 619         select FB_CFB_COPYAREA
 620         select FB_CFB_IMAGEBLIT
 621         select FB_SOFT_CURSOR
 622         help
 623           Build in support for the SED1355 Epson Research Embedded RAMDAC
 624           LCD/CRT Controller (since redesignated as the S1D13505) as a
 625           framebuffer.  Product specs at
 626           <http://www.erd.epson.com/vdc/html/products.htm>.
 627
 628 config FB_NVIDIA
 629         tristate "nVidia Framebuffer Support"
 630         depends on FB && PCI
 631         select I2C_ALGOBIT if FB_NVIDIA_I2C
 632         select I2C if FB_NVIDIA_I2C
 633         select FB_MODE_HELPERS
 634         select FB_CFB_FILLRECT
 635         select FB_CFB_COPYAREA
 636         select FB_CFB_IMAGEBLIT
 637         select FB_SOFT_CURSOR
 638         help
 639           This driver supports graphics boards with the nVidia chips, TNT
 640           and newer. For very old chipsets, such as the RIVA128, then use
 641           the rivafb.
 642           Say Y if you have such a graphics board.
 643
 644           To compile this driver as a module, choose M here: the
 645           module will be called nvidiafb.
 646
 647 config FB_NVIDIA_I2C
 648        bool "Enable DDC Support"
 649        depends on FB_NVIDIA && !PPC_OF
 650        help
 651           This enables I2C support for nVidia Chipsets.  This is used
 652           only for getting EDID information from the attached display
 653           allowing for robust video mode handling and switching.
 654
 655           Because fbdev-2.6 requires that drivers must be able to
 656           independently validate video mode parameters, you should say Y
 657           here.
 658
 659 config FB_RIVA
 660         tristate "nVidia Riva support"
 661         depends on FB && PCI
 662         select I2C_ALGOBIT if FB_RIVA_I2C
 663         select I2C if FB_RIVA_I2C
 664         select FB_MODE_HELPERS
 665         select FB_CFB_FILLRECT
 666         select FB_CFB_COPYAREA
 667         select FB_CFB_IMAGEBLIT
 668         select FB_SOFT_CURSOR
 669         help
 670           This driver supports graphics boards with the nVidia Riva/Geforce
 671           chips.
 672           Say Y if you have such a graphics board.
 673
 674           To compile this driver as a module, choose M here: the
 675           module will be called rivafb.
 676
 677 config FB_RIVA_I2C
 678        bool "Enable DDC Support"
 679        depends on FB_RIVA
 680        help
 681           This enables I2C support for nVidia Chipsets.  This is used
 682           only for getting EDID information from the attached display
 683           allowing for robust video mode handling and switching.
 684
 685           Because fbdev-2.6 requires that drivers must be able to
 686           independently validate video mode parameters, you should say Y
 687           here.
 688
 689 config FB_RIVA_DEBUG
 690         bool "Lots of debug output from Riva(nVidia) driver"
 691         depends on FB_RIVA
 692         default n
 693         help
 694           Say Y here if you want the Riva driver to output all sorts
 695           of debugging informations to provide to the maintainer when
 696           something goes wrong.
 697
 698 config FB_I810
 699         tristate "Intel 810/815 support (EXPERIMENTAL)"
 700         depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
 701         select AGP
 702         select AGP_INTEL
 703         select FB_MODE_HELPERS
 704         select FB_CFB_FILLRECT
 705         select FB_CFB_COPYAREA
 706         select FB_CFB_IMAGEBLIT
 707         select FB_SOFT_CURSOR
 708         help
 709           This driver supports the on-board graphics built in to the Intel 810
 710           and 815 chipsets.  Say Y if you have and plan to use such a board.
 711
 712           To compile this driver as a module, choose M here: the
 713           module will be called i810fb.
 714
 715           For more information, please read
 716           <file:Documentation/fb/intel810.txt>
 717
 718 config FB_I810_GTF
 719         bool "use VESA Generalized Timing Formula"
 720         depends on FB_I810
 721         help
 722           If you say Y, then the VESA standard, Generalized Timing Formula
 723           or GTF, will be used to calculate the required video timing values
 724           per video mode.  Since the GTF allows nondiscrete timings
 725           (nondiscrete being a range of values as opposed to discrete being a
 726           set of values), you'll be able to use any combination of horizontal
 727           and vertical resolutions, and vertical refresh rates without having
 728           to specify your own timing parameters.  This is especially useful
 729           to maximize the performance of an aging display, or if you just
 730           have a display with nonstandard dimensions. A VESA compliant
 731           monitor is recommended, but can still work with non-compliant ones.
 732           If you need or want this, then select this option. The timings may
 733           not be compliant with Intel's recommended values. Use at your own
 734           risk.
 735
 736           If you say N, the driver will revert to discrete video timings
 737           using a set recommended by Intel in their documentation.
 738
 739           If unsure, say N.
 740
 741 config FB_INTEL
 742         tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
 743         depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
 744         select AGP
 745         select AGP_INTEL
 746         select FB_MODE_HELPERS
 747         select FB_CFB_FILLRECT
 748         select FB_CFB_COPYAREA
 749         select FB_CFB_IMAGEBLIT
 750         select FB_SOFT_CURSOR
 751         help
 752           This driver supports the on-board graphics built in to the Intel
 753           830M/845G/852GM/855GM/865G chipsets.
 754           Say Y if you have and plan to use such a board.
 755
 756           To compile this driver as a module, choose M here: the
 757           module will be called intelfb.
 758
 759 config FB_INTEL_DEBUG
 760         bool "Intel driver Debug Messages"
 761         depends on FB_INTEL
 762         ---help---
 763           Say Y here if you want the Intel driver to output all sorts
 764           of debugging informations to provide to the maintainer when
 765           something goes wrong.
 766
 767 config FB_MATROX
 768         tristate "Matrox acceleration"
 769         depends on FB && PCI
 770         select FB_CFB_FILLRECT
 771         select FB_CFB_COPYAREA
 772         select FB_CFB_IMAGEBLIT
 773         select FB_SOFT_CURSOR
 774         select FB_TILEBLITTING
 775         select FB_MACMODES if PPC_PMAC
 776         ---help---
 777           Say Y here if you have a Matrox Millennium, Matrox Millennium II,
 778           Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
 779           Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
 780           Matrox G400, G450 or G550 card in your box.
 781
 782           To compile this driver as a module, choose M here: the
 783           module will be called matroxfb.
 784
 785           You can pass several parameters to the driver at boot time or at
 786           module load time. The parameters look like "video=matrox:XXX", and
 787           are described in <file:Documentation/fb/matroxfb.txt>.
 788
 789 config FB_MATROX_MILLENIUM
 790         bool "Millennium I/II support"
 791         depends on FB_MATROX
 792         help
 793           Say Y here if you have a Matrox Millennium or Matrox Millennium II
 794           video card. If you select "Advanced lowlevel driver options" below,
 795           you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
 796           packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
 797           also use font widths different from 8.
 798
 799 config FB_MATROX_MYSTIQUE
 800         bool "Mystique support"
 801         depends on FB_MATROX
 802         help
 803           Say Y here if you have a Matrox Mystique or Matrox Mystique 220
 804           video card. If you select "Advanced lowlevel driver options" below,
 805           you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
 806           packed pixel and 32 bpp packed pixel. You can also use font widths
 807           different from 8.
 808
 809 config FB_MATROX_G
 810         bool "G100/G200/G400/G450/G550 support"
 811         depends on FB_MATROX
 812         ---help---
 813           Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
 814           video card. If you select "Advanced lowlevel driver options", you
 815           should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
 816           pixel and 32 bpp packed pixel. You can also use font widths
 817           different from 8.
 818
 819           If you need support for G400 secondary head, you must first say Y to
 820           "I2C support" in the character devices section, and then to
 821           "Matrox I2C support" and "G400 second head support" here in the
 822           framebuffer section. G450/G550 secondary head and digital output
 823           are supported without additional modules.
 824
 825           The driver starts in monitor mode. You must use the matroxset tool
 826           (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
 827           swap primary and secondary head outputs, or to change output mode.
 828           Secondary head driver always start in 640x480 resolution and you
 829           must use fbset to change it.
 830
 831           Do not forget that second head supports only 16 and 32 bpp
 832           packed pixels, so it is a good idea to compile them into the kernel
 833           too. You can use only some font widths, as the driver uses generic
 834           painting procedures (the secondary head does not use acceleration
 835           engine).
 836
 837           G450/G550 hardware can display TV picture only from secondary CRTC,
 838           and it performs no scaling, so picture must have 525 or 625 lines.
 839
 840 config FB_MATROX_I2C
 841         tristate "Matrox I2C support"
 842         depends on FB_MATROX && I2C
 843         select I2C_ALGOBIT
 844         ---help---
 845           This drivers creates I2C buses which are needed for accessing the
 846           DDC (I2C) bus present on all Matroxes, an I2C bus which
 847           interconnects Matrox optional devices, like MGA-TVO on G200 and
 848           G400, and the secondary head DDC bus, present on G400 only.
 849
 850           You can say Y or M here if you want to experiment with monitor
 851           detection code. You must say Y or M here if you want to use either
 852           second head of G400 or MGA-TVO on G200 or G400.
 853
 854           If you compile it as module, it will create a module named
 855           i2c-matroxfb.
 856
 857 config FB_MATROX_MAVEN
 858         tristate "G400 second head support"
 859         depends on FB_MATROX_G && FB_MATROX_I2C
 860         ---help---
 861           WARNING !!! This support does not work with G450 !!!
 862
 863           Say Y or M here if you want to use a secondary head (meaning two
 864           monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
 865           head is not compatible with accelerated XFree 3.3.x SVGA servers -
 866           secondary head output is blanked while you are in X. With XFree
 867           3.9.17 preview you can use both heads if you use SVGA over fbdev or
 868           the fbdev driver on first head and the fbdev driver on second head.
 869
 870           If you compile it as module, two modules are created,
 871           matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
 872           both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
 873           also load i2c-matroxfb to get it to run.
 874
 875           The driver starts in monitor mode and you must use the matroxset
 876           tool (available at
 877           <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
 878           PAL or NTSC or to swap primary and secondary head outputs.
 879           Secondary head driver also always start in 640x480 resolution, you
 880           must use fbset to change it.
 881
 882           Also do not forget that second head supports only 16 and 32 bpp
 883           packed pixels, so it is a good idea to compile them into the kernel
 884           too.  You can use only some font widths, as the driver uses generic
 885           painting procedures (the secondary head does not use acceleration
 886           engine).
 887
 888 config FB_MATROX_MULTIHEAD
 889         bool "Multihead support"
 890         depends on FB_MATROX
 891         ---help---
 892           Say Y here if you have more than one (supported) Matrox device in
 893           your computer and you want to use all of them for different monitors
 894           ("multihead"). If you have only one device, you should say N because
 895           the driver compiled with Y is larger and a bit slower, especially on
 896           ia32 (ix86).
 897
 898           If you said M to "Matrox unified accelerated driver" and N here, you
 899           will still be able to use several Matrox devices simultaneously:
 900           insert several instances of the module matroxfb into the kernel
 901           with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
 902           for the different Matrox devices. This method is slightly faster but
 903           uses 40 KB of kernel memory per Matrox card.
 904
 905           There is no need for enabling 'Matrox multihead support' if you have
 906           only one Matrox card in the box.
 907
 908 config FB_RADEON_OLD
 909         tristate "ATI Radeon display support (Old driver)"
 910         depends on FB && PCI
 911         select FB_CFB_FILLRECT
 912         select FB_CFB_COPYAREA
 913         select FB_CFB_IMAGEBLIT
 914         select FB_SOFT_CURSOR
 915         select FB_MACMODES if PPC
 916         help
 917           Choose this option if you want to use an ATI Radeon graphics card as
 918           a framebuffer device.  There are both PCI and AGP versions.  You
 919           don't need to choose this to run the Radeon in plain VGA mode.
 920           There is a product page at
 921           <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
 922
 923 config FB_RADEON
 924         tristate "ATI Radeon display support"
 925         depends on FB && PCI
 926         select I2C_ALGOBIT if FB_RADEON_I2C
 927         select I2C if FB_RADEON_I2C
 928         select FB_MODE_HELPERS
 929         select FB_CFB_FILLRECT
 930         select FB_CFB_COPYAREA
 931         select FB_CFB_IMAGEBLIT
 932         select FB_SOFT_CURSOR
 933         select FB_MACMODES if PPC_OF
 934         help
 935           Choose this option if you want to use an ATI Radeon graphics card as
 936           a framebuffer device.  There are both PCI and AGP versions.  You
 937           don't need to choose this to run the Radeon in plain VGA mode.
 938
 939           If you say Y here and want DDC/I2C support you must first say Y to
 940           "I2C support" and "I2C bit-banging support" in the character devices
 941           section.
 942
 943           If you say M here then "I2C support" and "I2C bit-banging support"
 944           can be build either as modules or built-in.
 945
 946           There is a product page at
 947           <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
 948
 949 config FB_RADEON_I2C
 950         bool "DDC/I2C for ATI Radeon support"
 951         depends on FB_RADEON
 952         default y
 953         help
 954           Say Y here if you want DDC/I2C support for your Radeon board.
 955
 956 config FB_RADEON_DEBUG
 957         bool "Lots of debug output from Radeon driver"
 958         depends on FB_RADEON
 959         default n
 960         help
 961           Say Y here if you want the Radeon driver to output all sorts
 962           of debugging informations to provide to the maintainer when
 963           something goes wrong.
 964
 965 config FB_ATY128
 966         tristate "ATI Rage128 display support"
 967         depends on FB && PCI
 968         select FB_CFB_FILLRECT
 969         select FB_CFB_COPYAREA
 970         select FB_CFB_IMAGEBLIT
 971         select FB_SOFT_CURSOR
 972         select FB_MACMODES if PPC_PMAC
 973         help
 974           This driver supports graphics boards with the ATI Rage128 chips.
 975           Say Y if you have such a graphics board and read
 976           <file:Documentation/fb/aty128fb.txt>.
 977
 978           To compile this driver as a module, choose M here: the
 979           module will be called aty128fb.
 980
 981 config FB_ATY
 982         tristate "ATI Mach64 display support" if PCI || ATARI
 983         depends on FB
 984         select FB_CFB_FILLRECT
 985         select FB_CFB_COPYAREA
 986         select FB_CFB_IMAGEBLIT
 987         select FB_SOFT_CURSOR
 988         select FB_MACMODES if PPC
 989         help
 990           This driver supports graphics boards with the ATI Mach64 chips.
 991           Say Y if you have such a graphics board.
 992
 993           To compile this driver as a module, choose M here: the
 994           module will be called atyfb.
 995
 996 config FB_ATY_CT
 997         bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
 998         depends on PCI && FB_ATY
 999         default y if SPARC64 && FB_PCI
1000         help
1001           Say Y here to support use of ATI's 64-bit Rage boards (or other
1002           boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1003           framebuffer device.  The ATI product support page for these boards
1004           is at <http://support.ati.com/products/pc/mach64/>.
1005
1006 config FB_ATY_GENERIC_LCD
1007         bool "Mach64 generic LCD support (EXPERIMENTAL)"
1008         depends on FB_ATY_CT
1009         help
1010           Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1011           Rage XC, or Rage XL chipset.
1012
1013 config FB_ATY_XL_INIT
1014         bool "Rage XL No-BIOS Init support"
1015         depends on FB_ATY_CT
1016         help
1017           Say Y here to support booting a Rage XL without BIOS support.
1018
1019 config FB_ATY_GX
1020         bool "Mach64 GX support" if PCI
1021         depends on FB_ATY
1022         default y if ATARI
1023         help
1024           Say Y here to support use of the ATI Mach64 Graphics Expression
1025           board (or other boards based on the Mach64 GX chipset) as a
1026           framebuffer device.  The ATI product support page for these boards
1027           is at
1028           <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1029
1030 config FB_SAVAGE
1031         tristate "S3 Savage support"
1032         depends on FB && PCI && EXPERIMENTAL
1033         select I2C_ALGOBIT if FB_SAVAGE_I2C
1034         select I2C if FB_SAVAGE_I2C
1035         select FB_MODE_HELPERS
1036         select FB_CFB_FILLRECT
1037         select FB_CFB_COPYAREA
1038         select FB_CFB_IMAGEBLIT
1039         select FB_SOFT_CURSOR
1040         help
1041           This driver supports notebooks and computers with S3 Savage PCI/AGP
1042           chips.
1043
1044           Say Y if you have such a graphics card.
1045
1046           To compile this driver as a module, choose M here; the module
1047           will be called savagefb.
1048
1049 config FB_SAVAGE_I2C
1050        bool "Enable DDC2 Support"
1051        depends on FB_SAVAGE
1052        help
1053           This enables I2C support for S3 Savage Chipsets.  This is used
1054           only for getting EDID information from the attached display
1055           allowing for robust video mode handling and switching.
1056
1057           Because fbdev-2.6 requires that drivers must be able to
1058           independently validate video mode parameters, you should say Y
1059           here.
1060
1061 config FB_SAVAGE_ACCEL
1062        bool "Enable Console Acceleration"
1063        depends on FB_SAVAGE
1064        default n
1065        help
1066           This option will compile in console acceleration support. If
1067           the resulting framebuffer console has bothersome glitches, then
1068           choose N here.
1069
1070 config FB_SIS
1071         tristate "SiS acceleration"
1072         depends on FB && PCI
1073         select FB_CFB_FILLRECT
1074         select FB_CFB_COPYAREA
1075         select FB_CFB_IMAGEBLIT
1076         select FB_SOFT_CURSOR
1077         help
1078           This is the frame buffer device driver for the SiS 300, 315 and
1079           330 series VGA chipsets. Specs available at <http://www.sis.com>
1080
1081           To compile this driver as a module, choose M here; the module
1082           will be called sisfb.
1083
1084 config FB_SIS_300
1085         bool "SiS 300 series support"
1086         depends on FB_SIS
1087         help
1088           Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1089
1090 config FB_SIS_315
1091         bool "SiS 315/330 series support"
1092         depends on FB_SIS
1093         help
1094           Say Y here to support use of the SiS 315 and 330 series
1095           (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760).
1096
1097 config FB_NEOMAGIC
1098         tristate "NeoMagic display support"
1099         depends on FB && PCI
1100         select FB_MODE_HELPERS
1101         select FB_CFB_FILLRECT
1102         select FB_CFB_COPYAREA
1103         select FB_CFB_IMAGEBLIT
1104         select FB_SOFT_CURSOR
1105         help
1106           This driver supports notebooks with NeoMagic PCI chips.
1107           Say Y if you have such a graphics card.
1108
1109           To compile this driver as a module, choose M here: the
1110           module will be called neofb.
1111
1112 config FB_KYRO
1113         tristate "IMG Kyro support"
1114         depends on FB && PCI
1115         select FB_CFB_FILLRECT
1116         select FB_CFB_COPYAREA
1117         select FB_CFB_IMAGEBLIT
1118         select FB_SOFT_CURSOR
1119         help
1120           Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1121           graphics board.
1122
1123           To compile this driver as a module, choose M here: the
1124           module will be called kyrofb.
1125
1126 config FB_3DFX
1127         tristate "3Dfx Banshee/Voodoo3 display support"
1128         depends on FB && PCI
1129         select FB_CFB_IMAGEBLIT
1130         select FB_CFB_FILLRECT
1131         select FB_CFB_COPYAREA
1132         select FB_SOFT_CURSOR
1133         help
1134           This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1135           chips. Say Y if you have such a graphics board.
1136
1137           To compile this driver as a module, choose M here: the
1138           module will be called tdfxfb.
1139
1140 config FB_3DFX_ACCEL
1141         bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1142         depends on FB_3DFX && EXPERIMENTAL
1143         ---help---
1144         This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1145         with acceleration functions.
1146
1147
1148 config FB_VOODOO1
1149         tristate "3Dfx Voodoo Graphics (sst1) support"
1150         depends on FB && PCI
1151         select FB_CFB_FILLRECT
1152         select FB_CFB_COPYAREA
1153         select FB_CFB_IMAGEBLIT
1154         select FB_SOFT_CURSOR
1155         ---help---
1156           Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1157           Voodoo2 (cvg) based graphics card.
1158
1159           To compile this driver as a module, choose M here: the
1160           module will be called sstfb.
1161
1162           WARNING: Do not use any application that uses the 3D engine
1163           (namely glide) while using this driver.
1164           Please read the <file:Documentation/fb/README-sstfb.txt> for supported
1165           options and other important info  support.
1166
1167 config FB_TRIDENT
1168         tristate "Trident support"
1169         depends on FB && PCI
1170         select FB_CFB_FILLRECT
1171         select FB_CFB_COPYAREA
1172         select FB_CFB_IMAGEBLIT
1173         select FB_SOFT_CURSOR
1174         ---help---
1175           This driver is supposed to support graphics boards with the
1176           Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1177           but also on some motherboards. For more information, read
1178           <file:Documentation/fb/tridentfb.txt>
1179
1180           Say Y if you have such a graphics board.
1181
1182           To compile this driver as a module, choose M here: the
1183           module will be called tridentfb.
1184
1185 config FB_TRIDENT_ACCEL
1186         bool "Trident Acceleration functions (EXPERIMENTAL)"
1187         depends on FB_TRIDENT && EXPERIMENTAL
1188         ---help---
1189         This will compile the Trident frame buffer device with
1190         acceleration functions.
1191
1192
1193 config FB_PM3
1194         tristate "Permedia3 support"
1195         depends on FB && PCI && BROKEN
1196         help
1197           This is the frame buffer device driver for the 3DLabs Permedia3
1198           chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1199           similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1200           and maybe other boards.
1201
1202 config FB_E1356
1203         tristate "Epson SED1356 framebuffer support"
1204         depends on FB && EXPERIMENTAL && PCI && MIPS
1205
1206 config PB1000_CRT
1207         bool "Use CRT on Pb1000 (J65)"
1208         depends on MIPS_PB1000=y && FB_E1356
1209
1210 config PB1000_NTSC
1211         bool "Use Compsite NTSC on Pb1000 (J63)"
1212         depends on MIPS_PB1000=y && FB_E1356
1213
1214 config PB1000_TFT
1215         bool "Use TFT Panel on Pb1000 (J64)"
1216         depends on MIPS_PB1000=y && FB_E1356
1217
1218 config PB1500_CRT
1219         bool "Use CRT on Pb1500 " if MIPS_PB1500=y
1220         depends on FB_E1356
1221
1222 config PB1500_CRT
1223         prompt "Use CRT on Pb1100 "
1224         depends on FB_E1356 && MIPS_PB1100=y
1225
1226 config PB1500_TFT
1227         bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
1228         depends on FB_E1356
1229
1230 config PB1500_TFT
1231         prompt "Use TFT Panel on Pb1100 "
1232         depends on FB_E1356 && MIPS_PB1100=y
1233
1234 config FB_AU1100
1235         bool "Au1100 LCD Driver"
1236         depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
1237
1238 source "drivers/video/geode/Kconfig"
1239
1240 config FB_SBUS
1241         bool "SBUS and UPA framebuffers"
1242         depends on (FB = y) && (SPARC32 || SPARC64)
1243         help
1244           Say Y if you want support for SBUS or UPA based frame buffer device.
1245
1246 config FB_FFB
1247         bool "Creator/Creator3D/Elite3D support"
1248         depends on FB_SBUS && SPARC64
1249         select FB_CFB_COPYAREA
1250         select FB_CFB_IMAGEBLIT
1251         select FB_SOFT_CURSOR
1252         help
1253           This is the frame buffer device driver for the Creator, Creator3D,
1254           and Elite3D graphics boards.
1255
1256 config FB_TCX
1257         bool "TCX (SS4/SS5 only) support"
1258         depends on FB_SBUS
1259         select FB_CFB_FILLRECT
1260         select FB_CFB_COPYAREA
1261         select FB_CFB_IMAGEBLIT
1262         select FB_SOFT_CURSOR
1263         help
1264           This is the frame buffer device driver for the TCX 24/8bit frame
1265           buffer.
1266
1267 config FB_CG14
1268         bool "CGfourteen (SX) support"
1269         depends on FB_SBUS
1270         select FB_CFB_FILLRECT
1271         select FB_CFB_COPYAREA
1272         select FB_CFB_IMAGEBLIT
1273         select FB_SOFT_CURSOR
1274         help
1275           This is the frame buffer device driver for the CGfourteen frame
1276           buffer on Desktop SPARCsystems with the SX graphics option.
1277
1278 config FB_P9100
1279         bool "P9100 (Sparcbook 3 only) support"
1280         depends on FB_SBUS
1281         select FB_CFB_FILLRECT
1282         select FB_CFB_COPYAREA
1283         select FB_CFB_IMAGEBLIT
1284         select FB_SOFT_CURSOR
1285         help
1286           This is the frame buffer device driver for the P9100 card
1287           supported on Sparcbook 3 machines.
1288
1289 config FB_LEO
1290         bool "Leo (ZX) support"
1291         depends on FB_SBUS
1292         select FB_CFB_FILLRECT
1293         select FB_CFB_COPYAREA
1294         select FB_CFB_IMAGEBLIT
1295         select FB_SOFT_CURSOR
1296         help
1297           This is the frame buffer device driver for the SBUS-based Sun ZX
1298           (leo) frame buffer cards.
1299
1300 config FB_PCI
1301         bool "PCI framebuffers"
1302         depends on (FB = y) && PCI && (SPARC64 || SPARC32)
1303
1304 config FB_IGA
1305         bool "IGA 168x display support"
1306         depends on SPARC32 && FB_PCI
1307         select FB_CFB_FILLRECT
1308         select FB_CFB_COPYAREA
1309         select FB_CFB_IMAGEBLIT
1310         select FB_SOFT_CURSOR
1311         help
1312           This is the framebuffer device for the INTERGRAPHICS 1680 and
1313           successor frame buffer cards.
1314
1315 config FB_HIT
1316         tristate "HD64461 Frame Buffer support"
1317         depends on FB && HD64461
1318         select FB_CFB_FILLRECT
1319         select FB_CFB_COPYAREA
1320         select FB_CFB_IMAGEBLIT
1321         select FB_SOFT_CURSOR
1322         help
1323           This is the frame buffer device driver for the Hitachi HD64461 LCD
1324           frame buffer card.
1325
1326 config FB_PMAG_AA
1327         bool "PMAG-AA TURBOchannel framebuffer support"
1328         depends on (FB = y) && MACH_DECSTATION && TC
1329         select FB_CFB_FILLRECT
1330         select FB_CFB_COPYAREA
1331         select FB_CFB_IMAGEBLIT
1332         select FB_SOFT_CURSOR
1333         help
1334           Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1335           used mainly in the MIPS-based DECstation series.
1336
1337 config FB_PMAG_BA
1338         bool "PMAG-BA TURBOchannel framebuffer support"
1339         depends on (FB = y) && MACH_DECSTATION && TC
1340         select FB_CFB_FILLRECT
1341         select FB_CFB_COPYAREA
1342         select FB_CFB_IMAGEBLIT
1343         select FB_SOFT_CURSOR
1344         help
1345           Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1346           used mainly in the MIPS-based DECstation series.
1347
1348 config FB_PMAGB_B
1349         bool "PMAGB-B TURBOchannel framebuffer support"
1350         depends on (FB = y) && MACH_DECSTATION && TC
1351         select FB_CFB_FILLRECT
1352         select FB_CFB_COPYAREA
1353         select FB_CFB_IMAGEBLIT
1354         select FB_SOFT_CURSOR
1355         help
1356           Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1357           in the MIPS-based DECstation series. The card is currently only
1358           supported in 1280x1024x8 mode.
1359
1360 config FB_MAXINE
1361         bool "Maxine (Personal DECstation) onboard framebuffer support"
1362         depends on (FB = y) && MACH_DECSTATION && TC
1363         select FB_CFB_FILLRECT
1364         select FB_CFB_COPYAREA
1365         select FB_CFB_IMAGEBLIT
1366         select FB_SOFT_CURSOR
1367         help
1368           Support for the onboard framebuffer (1024x768x8) in the Personal
1369           DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1370           Codename "Maxine").
1371
1372 config FB_TX3912
1373         bool "TMPTX3912/PR31700 frame buffer support"
1374         depends on (FB = y) && NINO
1375         select FB_CFB_FILLRECT
1376         select FB_CFB_COPYAREA
1377         select FB_CFB_IMAGEBLIT
1378         select FB_SOFT_CURSOR
1379         help
1380           The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
1381           see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
1382
1383           Say Y here to enable kernel support for the on-board framebuffer.
1384
1385 config FB_G364
1386         bool
1387         depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
1388         select FB_CFB_FILLRECT
1389         select FB_CFB_COPYAREA
1390         select FB_CFB_IMAGEBLIT
1391         select FB_SOFT_CURSOR
1392         help
1393           The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1394           Olivetti M700-10 systems.
1395
1396 config FB_68328
1397         bool "Motorola 68328 native frame buffer support"
1398         depends on FB && (M68328 || M68EZ328 || M68VZ328)
1399         select FB_CFB_FILLRECT
1400         select FB_CFB_COPYAREA
1401         select FB_CFB_IMAGEBLIT
1402         select FB_SOFT_CURSOR
1403         help
1404           Say Y here if you want to support the built-in frame buffer of
1405           the Motorola 68328 CPU family.
1406
1407 config FB_PXA
1408         tristate "PXA LCD framebuffer support"
1409         depends on FB && ARCH_PXA
1410         select FB_CFB_FILLRECT
1411         select FB_CFB_COPYAREA
1412         select FB_CFB_IMAGEBLIT
1413         select FB_SOFT_CURSOR
1414         ---help---
1415           Frame buffer driver for the built-in LCD controller in the Intel
1416           PXA2x0 processor.
1417
1418           This driver is also available as a module ( = code which can be
1419           inserted and removed from the running kernel whenever you want). The
1420           module will be called vfb. If you want to compile it as a module,
1421           say M here and read <file:Documentation/modules.txt>.
1422
1423           If unsure, say N.
1424
1425 config FB_W100
1426         tristate "W100 frame buffer support"
1427         depends on FB && PXA_SHARPSL
1428         select FB_CFB_FILLRECT
1429         select FB_CFB_COPYAREA
1430         select FB_CFB_IMAGEBLIT
1431         select FB_SOFT_CURSOR
1432         ---help---
1433           Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1434
1435           This driver is also available as a module ( = code which can be
1436           inserted and removed from the running kernel whenever you want). The
1437           module will be called vfb. If you want to compile it as a module,
1438           say M here and read <file:Documentation/modules.txt>.
1439
1440           If unsure, say N.
1441
1442 config FB_PXA_PARAMETERS
1443         bool "PXA LCD command line parameters"
1444         default n
1445         depends on FB_PXA
1446         ---help---
1447           Enable the use of kernel command line or module parameters
1448           to configure the physical properties of the LCD panel when
1449           using the PXA LCD driver.
1450
1451           This option allows you to override the panel parameters
1452           supplied by the platform in order to support multiple
1453           different models of flatpanel. If you will only be using a
1454           single model of flatpanel then you can safely leave this
1455           option disabled.
1456
1457           <file:Documentation/fb/pxafb.txt> describes the available parameters.
1458
1459 config FB_S1D13XXX
1460         tristate "Epson S1D13XXX framebuffer support"
1461         depends on FB
1462         select FB_CFB_FILLRECT
1463         select FB_CFB_COPYAREA
1464         select FB_CFB_IMAGEBLIT
1465         select FB_SOFT_CURSOR
1466         help
1467           Support for S1D13XXX framebuffer device family (currently only
1468           working with S1D13806). Product specs at
1469           <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
1470
1471 config FB_VIRTUAL
1472         tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1473         depends on FB
1474         select FB_CFB_FILLRECT
1475         select FB_CFB_COPYAREA
1476         select FB_CFB_IMAGEBLIT
1477         select FB_SOFT_CURSOR
1478         ---help---
1479           This is a `virtual' frame buffer device. It operates on a chunk of
1480           unswappable kernel memory instead of on the memory of a graphics
1481           board. This means you cannot see any output sent to this frame
1482           buffer device, while it does consume precious memory. The main use
1483           of this frame buffer device is testing and debugging the frame
1484           buffer subsystem. Do NOT enable it for normal systems! To protect
1485           the innocent, it has to be enabled explicitly at boot time using the
1486           kernel option `video=vfb:'.
1487
1488           To compile this driver as a module, choose M here: the
1489           module will be called vfb.
1490
1491           If unsure, say N.
1492 if VT
1493         source "drivers/video/console/Kconfig"
1494 endif
1495
1496 if FB || SGI_NEWPORT_CONSOLE
1497         source "drivers/video/logo/Kconfig"
1498 endif
1499
1500 if FB && SYSFS
1501         source "drivers/video/backlight/Kconfig"
1502 endif
1503
1504 endmenu
1505