drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menuconfig USB_SERIAL
   6         tristate "USB Serial Converter support"
   7         depends on TTY
   8         ---help---
   9           Say Y here if you have a USB device that provides normal serial
  10           ports, or acts like a serial device, and you want to connect it to
  11           your USB bus.
  12
  13           Please read <file:Documentation/usb/usb-serial.txt> for more
  14           information on the specifics of the different devices that are
  15           supported, and on how to use them.
  16
  17           To compile this driver as a module, choose M here: the
  18           module will be called usbserial.
  19
  20 if USB_SERIAL
  21
  22 config USB_SERIAL_CONSOLE
  23         bool "USB Serial Console device support"
  24         depends on USB_SERIAL=y
  25         ---help---
  26           If you say Y here, it will be possible to use a USB to serial
  27           converter port as the system console (the system console is the
  28           device which receives all kernel messages and warnings and which
  29           allows logins in single user mode). This could be useful if some
  30           terminal or printer is connected to that serial port.
  31
  32           Even if you say Y here, the currently visible virtual console
  33           (/dev/tty0) will still be used as the system console by default, but
  34           you can alter that using a kernel command line option such as
  35           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  36           your boot loader (lilo or loadlin) about how to pass options to the
  37           kernel at boot time.)
  38
  39           If you don't have a VGA card installed and you say Y here, the
  40           kernel will automatically use the first USB to serial converter
  41           port, /dev/ttyUSB0, as system console.
  42
  43           If unsure, say N.
  44
  45 config USB_SERIAL_GENERIC
  46         bool "USB Generic Serial Driver"
  47         help
  48           Say Y here if you want to use the generic USB serial driver.  Please
  49           read <file:Documentation/usb/usb-serial.txt> for more information on
  50           using this driver.  It is recommended that the "USB Serial converter
  51           support" be compiled as a module for this driver to be used
  52           properly.
  53
  54 config USB_SERIAL_AIRCABLE
  55         tristate "USB AIRcable Bluetooth Dongle Driver"
  56         help
  57             Say Y here if you want to use USB AIRcable Bluetooth Dongle.
  58
  59             To compile this driver as a module, choose M here: the module
  60             will be called aircable.
  61
  62 config USB_SERIAL_ARK3116
  63         tristate "USB ARK Micro 3116 USB Serial Driver"
  64         help
  65           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  66           device.
  67
  68           To compile this driver as a module, choose M here: the
  69           module will be called ark3116
  70
  71 config USB_SERIAL_BELKIN
  72         tristate "USB Belkin and Peracom Single Port Serial Driver"
  73         help
  74           Say Y here if you want to use a Belkin USB Serial single port
  75           adaptor (F5U103 is one of the model numbers) or the Peracom single
  76           port USB to serial adapter.
  77
  78           To compile this driver as a module, choose M here: the
  79           module will be called belkin_sa.
  80
  81 config USB_SERIAL_CH341
  82         tristate "USB Winchiphead CH341 Single Port Serial Driver"
  83         help
  84           Say Y here if you want to use a Winchiphead CH341 single port
  85           USB to serial adapter.
  86
  87           To compile this driver as a module, choose M here: the
  88           module will be called ch341.
  89
  90 config USB_SERIAL_WHITEHEAT
  91         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  92         select USB_EZUSB_FX2
  93         help
  94           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
  95           USB to serial converter device.
  96
  97           To compile this driver as a module, choose M here: the
  98           module will be called whiteheat.
  99
 100 config USB_SERIAL_DIGI_ACCELEPORT
 101         tristate "USB Digi International AccelePort USB Serial Driver"
 102         ---help---
 103           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 104           2 port (plus parallel port) and 4 port USB serial converters.  The
 105           parallel port on the USB 2 appears as a third serial port on Linux.
 106           The Digi Acceleport USB 8 is not yet supported by this driver.
 107
 108           This driver works under SMP with the usb-uhci driver.  It does not
 109           work under SMP with the uhci driver.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called digi_acceleport.
 113
 114 config USB_SERIAL_CP210X
 115         tristate "USB CP210x family of UART Bridge Controllers"
 116         help
 117           Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
 118           to RS232 converters.
 119
 120           To compile this driver as a module, choose M here: the
 121           module will be called cp210x.
 122
 123 config USB_SERIAL_CYPRESS_M8
 124         tristate "USB Cypress M8 USB Serial Driver"
 125         help
 126           Say Y here if you want to use a device that contains the Cypress
 127           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 128
 129                 Attempted SMP support... send bug reports!
 130
 131           Supported microcontrollers in the CY4601 family are:
 132                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 133
 134           To compile this driver as a module, choose M here: the
 135           module will be called cypress_m8.
 136
 137 config USB_SERIAL_EMPEG
 138         tristate "USB Empeg empeg-car Mark I/II Driver"
 139         help
 140           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 141           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 142           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 143           tidbits of information.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called empeg.
 147
 148 config USB_SERIAL_FTDI_SIO
 149         tristate "USB FTDI Single Port Serial Driver"
 150         ---help---
 151           Say Y here if you want to use a FTDI SIO single port USB to serial
 152           converter device. The implementation I have is called the USC-1000.
 153           This driver has also be tested with the 245 and 232 devices.
 154
 155           See <http://ftdi-usb-sio.sourceforge.net/> for more
 156           information on this driver and the device.
 157
 158           To compile this driver as a module, choose M here: the
 159           module will be called ftdi_sio.
 160
 161 config USB_SERIAL_FUNSOFT
 162         tristate "USB Fundamental Software Dongle Driver"
 163         ---help---
 164           Say Y here if you want to use the Fundamental Software dongle.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called funsoft.
 168
 169 config USB_SERIAL_VISOR
 170         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 171         help
 172           Say Y here if you want to connect to your HandSpring Visor, Palm
 173           m500 or m505 through its USB docking station. See
 174           <http://usbvisor.sourceforge.net/index.php3> for more information on using this
 175           driver.
 176
 177           To compile this driver as a module, choose M here: the
 178           module will be called visor.
 179
 180 config USB_SERIAL_IPAQ
 181         tristate "USB PocketPC PDA Driver"
 182         help
 183           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 184           or any other PDA running Windows CE 3.0 or PocketPC 2002
 185           using a USB cradle/cable. For information on using the driver,
 186           read <file:Documentation/usb/usb-serial.txt>.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called ipaq.
 190
 191 config USB_SERIAL_IR
 192         tristate "USB IR Dongle Serial Driver"
 193         help
 194           Say Y here if you want to enable simple serial support for USB IrDA
 195           devices.  This is useful if you do not want to use the full IrDA
 196           stack.
 197
 198           To compile this driver as a module, choose M here: the
 199           module will be called ir-usb.
 200
 201 config USB_SERIAL_EDGEPORT
 202         tristate "USB Inside Out Edgeport Serial Driver"
 203         ---help---
 204           Say Y here if you want to use any of the following devices from
 205           Inside Out Networks (Digi):
 206           Edgeport/4
 207           Rapidport/4
 208           Edgeport/4t
 209           Edgeport/2
 210           Edgeport/4i
 211           Edgeport/2i
 212           Edgeport/421
 213           Edgeport/21
 214           Edgeport/8
 215           Edgeport/8 Dual
 216           Edgeport/2D8
 217           Edgeport/4D8
 218           Edgeport/8i
 219           Edgeport/2 DIN
 220           Edgeport/4 DIN
 221           Edgeport/16 Dual
 222
 223           To compile this driver as a module, choose M here: the
 224           module will be called io_edgeport.
 225
 226 config USB_SERIAL_EDGEPORT_TI
 227         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 228         help
 229           Say Y here if you want to use any of the devices from Inside Out
 230           Networks (Digi) that are not supported by the io_edgeport driver.
 231           This includes the Edgeport/1 device.
 232
 233           To compile this driver as a module, choose M here: the
 234           module will be called io_ti.
 235
 236 config USB_SERIAL_F81232
 237         tristate "USB Fintek F81232 Single Port Serial Driver"
 238         help
 239           Say Y here if you want to use the Fintek F81232 single
 240           port usb to serial adapter.
 241
 242           To compile this driver as a module, choose M here: the
 243           module will be called f81232.
 244
 245 config USB_SERIAL_GARMIN
 246        tristate "USB Garmin GPS driver"
 247        help
 248          Say Y here if you want to connect to your Garmin GPS.
 249          Should work with most Garmin GPS devices which have a native USB port.
 250
 251          See <http://sourceforge.net/projects/garmin-gps> for the latest
 252          version of the driver.
 253
 254          To compile this driver as a module, choose M here: the
 255          module will be called garmin_gps.
 256
 257 config USB_SERIAL_IPW
 258         tristate "USB IPWireless (3G UMTS TDD) Driver"
 259         select USB_SERIAL_WWAN
 260         help
 261           Say Y here if you want to use a IPWireless USB modem such as
 262           the ones supplied by Axity3G/Sentech South Africa.
 263
 264           To compile this driver as a module, choose M here: the
 265           module will be called ipw.
 266
 267 config USB_SERIAL_IUU
 268         tristate "USB Infinity USB Unlimited Phoenix Driver"
 269         help
 270           Say Y here if you want to use a IUU in phoenix mode and get
 271           an extra ttyUSBx device. More information available on
 272           http://eczema.ecze.com/iuu_phoenix.html
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called iuu_phoenix.o
 276
 277 config USB_SERIAL_KEYSPAN_PDA
 278         tristate "USB Keyspan PDA Single Port Serial Driver"
 279         select USB_EZUSB_FX2
 280         help
 281           Say Y here if you want to use a Keyspan PDA single port USB to
 282           serial converter device.  This driver makes use of firmware
 283           developed from scratch by Brian Warner.
 284
 285           To compile this driver as a module, choose M here: the
 286           module will be called keyspan_pda.
 287
 288 config USB_SERIAL_KEYSPAN
 289         tristate "USB Keyspan USA-xxx Serial Driver"
 290         select USB_EZUSB_FX2
 291         ---help---
 292           Say Y here if you want to use Keyspan USB to serial converter
 293           devices.  This driver makes use of Keyspan's official firmware
 294           and was developed with their support.  You must also include
 295           firmware to support your particular device(s).
 296
 297           See <http://blemings.org/hugh/keyspan.html> for more information.
 298
 299           To compile this driver as a module, choose M here: the
 300           module will be called keyspan.
 301
 302 config USB_SERIAL_KEYSPAN_MPR
 303         bool "USB Keyspan MPR Firmware"
 304         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 305         help
 306           Say Y here to include firmware for the Keyspan MPR converter.
 307
 308 config USB_SERIAL_KEYSPAN_USA28
 309         bool "USB Keyspan USA-28 Firmware"
 310         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 311         help
 312           Say Y here to include firmware for the USA-28 converter.
 313
 314 config USB_SERIAL_KEYSPAN_USA28X
 315         bool "USB Keyspan USA-28X Firmware"
 316         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 317         help
 318           Say Y here to include firmware for the USA-28X converter.
 319           Be sure you have a USA-28X, there are also 28XA and 28XB
 320           models, the label underneath has the actual part number.
 321
 322 config USB_SERIAL_KEYSPAN_USA28XA
 323         bool "USB Keyspan USA-28XA Firmware"
 324         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 325         help
 326           Say Y here to include firmware for the USA-28XA converter.
 327           Be sure you have a USA-28XA, there are also 28X and 28XB
 328           models, the label underneath has the actual part number.
 329
 330 config USB_SERIAL_KEYSPAN_USA28XB
 331         bool "USB Keyspan USA-28XB Firmware"
 332         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 333         help
 334           Say Y here to include firmware for the USA-28XB converter.
 335           Be sure you have a USA-28XB, there are also 28X and 28XA
 336           models, the label underneath has the actual part number.
 337
 338 config USB_SERIAL_KEYSPAN_USA19
 339         bool "USB Keyspan USA-19 Firmware"
 340         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 341         help
 342           Say Y here to include firmware for the USA-19 converter.
 343
 344 config USB_SERIAL_KEYSPAN_USA18X
 345         bool "USB Keyspan USA-18X Firmware"
 346         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 347         help
 348           Say Y here to include firmware for the USA-18X converter.
 349
 350 config USB_SERIAL_KEYSPAN_USA19W
 351         bool "USB Keyspan USA-19W Firmware"
 352         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 353         help
 354           Say Y here to include firmware for the USA-19W converter.
 355
 356 config USB_SERIAL_KEYSPAN_USA19QW
 357         bool "USB Keyspan USA-19QW Firmware"
 358         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 359         help
 360           Say Y here to include firmware for the USA-19QW converter.
 361
 362 config USB_SERIAL_KEYSPAN_USA19QI
 363         bool "USB Keyspan USA-19QI Firmware"
 364         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 365         help
 366           Say Y here to include firmware for the USA-19QI converter.
 367
 368 config USB_SERIAL_KEYSPAN_USA49W
 369         bool "USB Keyspan USA-49W Firmware"
 370         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 371         help
 372           Say Y here to include firmware for the USA-49W converter.
 373
 374 config USB_SERIAL_KEYSPAN_USA49WLC
 375         bool "USB Keyspan USA-49WLC Firmware"
 376         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 377         help
 378           Say Y here to include firmware for the USA-49WLC converter.
 379
 380 config USB_SERIAL_KLSI
 381         tristate "USB KL5KUSB105 (Palmconnect) Driver"
 382         ---help---
 383           Say Y here if you want to use a KL5KUSB105 - based single port
 384           serial adapter. The most widely known -- and currently the only
 385           tested -- device in this category is the PalmConnect USB Serial
 386           adapter sold by Palm Inc. for use with their Palm III and Palm V
 387           series PDAs.
 388
 389           Please read <file:Documentation/usb/usb-serial.txt> for more
 390           information.
 391
 392           To compile this driver as a module, choose M here: the
 393           module will be called kl5kusb105.
 394
 395 config USB_SERIAL_KOBIL_SCT
 396         tristate "USB KOBIL chipcard reader"
 397         ---help---
 398           Say Y here if you want to use one of the following KOBIL USB chipcard
 399           readers:
 400
 401             - USB TWIN
 402             - KAAN Standard Plus
 403             - KAAN SIM
 404             - SecOVID Reader Plus
 405             - B1 Professional
 406             - KAAN Professional
 407
 408           Note that you need a current CT-API.
 409           To compile this driver as a module, choose M here: the
 410           module will be called kobil_sct.
 411
 412 config USB_SERIAL_MCT_U232
 413         tristate "USB MCT Single Port Serial Driver"
 414         ---help---
 415           Say Y here if you want to use a USB Serial single port adapter from
 416           Magic Control Technology Corp. (U232 is one of the model numbers).
 417
 418           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 419           BAY, Belkin F5U109, and Belkin F5U409 devices.
 420
 421           To compile this driver as a module, choose M here: the
 422           module will be called mct_u232.
 423
 424 config USB_SERIAL_METRO
 425         tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
 426         ---help---
 427           Say Y here if you want to use a USB POS Metrologic barcode scanner.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called metro-usb.
 431
 432 config USB_SERIAL_MOS7720
 433         tristate "USB Moschip 7720 Serial Driver"
 434         ---help---
 435           Say Y here if you want to use USB Serial single and double
 436           port adapters from Moschip Semiconductor Tech.
 437
 438           To compile this driver as a module, choose M here: the
 439           module will be called mos7720.
 440
 441 config USB_SERIAL_MOS7715_PARPORT
 442         bool "Support for parallel port on the Moschip 7715"
 443         depends on USB_SERIAL_MOS7720
 444         depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 445         select PARPORT_NOT_PC
 446         ---help---
 447         Say Y if you have a Moschip 7715 device and would like to use
 448         the parallel port it provides.  The port will register with
 449         the parport subsystem as a low-level driver.
 450
 451 config USB_SERIAL_MOS7840
 452         tristate "USB Moschip 7840/7820 USB Serial Driver"
 453         ---help---
 454           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 455           Dual-Serial port device from MosChip Semiconductor.
 456
 457           The MCS7840 and MCS7820 have been developed to connect a wide range
 458           of standard serial devices to a USB host.  The MCS7840 has a USB
 459           device controller connected to four (4) individual UARTs while the
 460           MCS7820 controller connects to two (2) individual UARTs.
 461
 462           To compile this driver as a module, choose M here: the
 463           module will be called mos7840.  If unsure, choose N.
 464
 465 config USB_SERIAL_MOTOROLA
 466         tristate "USB Motorola Phone modem driver"
 467         ---help---
 468           Say Y here if you want to use a Motorola phone with a USB
 469           connector as a modem link.
 470
 471           To compile this driver as a module, choose M here: the
 472           module will be called moto_modem.  If unsure, choose N.
 473
 474 config USB_SERIAL_NAVMAN
 475         tristate "USB Navman GPS device"
 476         help
 477           To compile this driver as a module, choose M here: the
 478           module will be called navman.
 479
 480 config USB_SERIAL_PL2303
 481         tristate "USB Prolific 2303 Single Port Serial Driver"
 482         help
 483           Say Y here if you want to use the PL2303 USB Serial single port
 484           adapter from Prolific.
 485
 486           To compile this driver as a module, choose M here: the
 487           module will be called pl2303.
 488
 489 config USB_SERIAL_OTI6858
 490         tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
 491         help
 492           Say Y here if you want to use the OTi-6858 single port USB to serial
 493           converter device.
 494
 495           To compile this driver as a module, choose M here: the
 496           module will be called oti6858.
 497
 498 config USB_SERIAL_QCAUX
 499         tristate "USB Qualcomm Auxiliary Serial Port Driver"
 500         help
 501           Say Y here if you want to use the auxiliary serial ports provided
 502           by many modems based on Qualcomm chipsets.  These ports often use
 503           a proprietary protocol called DM and cannot be used for AT- or
 504           PPP-based communication.
 505
 506           To compile this driver as a module, choose M here: the
 507           module will be called qcaux.  If unsure, choose N.
 508
 509 config USB_SERIAL_QUALCOMM
 510         tristate "USB Qualcomm Serial modem"
 511         select USB_SERIAL_WWAN
 512         help
 513           Say Y here if you have a Qualcomm USB modem device.  These are
 514           usually wireless cellular modems.
 515
 516           To compile this driver as a module, choose M here: the
 517           module will be called qcserial.
 518
 519 config USB_SERIAL_SPCP8X5
 520         tristate "USB SPCP8x5 USB To Serial Driver"
 521         help
 522           Say Y here if you want to use the spcp8x5 converter chip.  This is
 523           commonly found in some Z-Wave USB devices.
 524
 525           To compile this driver as a module, choose M here: the
 526           module will be called spcp8x5.
 527
 528 config USB_SERIAL_HP4X
 529         tristate "USB HP4x Calculators support"
 530         help
 531           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 532
 533           To compile this driver as a module, choose M here: the
 534           module will be called hp4x.
 535
 536 config USB_SERIAL_SAFE
 537         tristate "USB Safe Serial (Encapsulated) Driver"
 538
 539 config USB_SERIAL_SAFE_PADDED
 540         bool "USB Secure Encapsulated Driver - Padded"
 541         depends on USB_SERIAL_SAFE
 542
 543 config USB_SERIAL_SIEMENS_MPI
 544         tristate "USB Siemens MPI driver"
 545         help
 546           Say M here if you want to use a Siemens USB/MPI adapter.
 547
 548           To compile this driver as a module, choose M here: the
 549           module will be called siemens_mpi.
 550
 551 config USB_SERIAL_SIERRAWIRELESS
 552         tristate "USB Sierra Wireless Driver"
 553         help
 554           Say M here if you want to use Sierra Wireless devices.
 555
 556           Many devices have a feature known as TRU-Install. For those devices
 557           to work properly, the USB Storage Sierra feature must be enabled.
 558
 559           To compile this driver as a module, choose M here: the
 560           module will be called sierra.
 561
 562 config USB_SERIAL_SYMBOL
 563         tristate "USB Symbol Barcode driver (serial mode)"
 564         help
 565           Say Y here if you want to use a Symbol USB Barcode device
 566           in serial emulation mode.
 567
 568           To compile this driver as a module, choose M here: the
 569           module will be called symbolserial.
 570
 571 config USB_SERIAL_TI
 572         tristate "USB TI 3410/5052 Serial Driver"
 573         help
 574           Say Y here if you want to use the TI USB 3410 or 5052
 575           serial devices.
 576
 577           To compile this driver as a module, choose M here: the
 578           module will be called ti_usb_3410_5052.
 579
 580 config USB_SERIAL_CYBERJACK
 581         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
 582         ---help---
 583           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 584           reader. This is an interface to ISO 7816 compatible contact-based
 585           chipcards, e.g. GSM SIMs.
 586
 587           To compile this driver as a module, choose M here: the
 588           module will be called cyberjack.
 589
 590           If unsure, say N.
 591
 592 config USB_SERIAL_XIRCOM
 593         tristate "USB Xircom / Entregra Single Port Serial Driver"
 594         select USB_EZUSB_FX2
 595         help
 596           Say Y here if you want to use a Xircom or Entregra single port USB to
 597           serial converter device.  This driver makes use of firmware
 598           developed from scratch by Brian Warner.
 599
 600           To compile this driver as a module, choose M here: the
 601           module will be called keyspan_pda.
 602
 603 config USB_SERIAL_WWAN
 604         tristate
 605
 606 config USB_SERIAL_OPTION
 607         tristate "USB driver for GSM and CDMA modems"
 608         select USB_SERIAL_WWAN
 609         help
 610           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 611
 612           This driver also supports several PCMCIA cards which have a
 613           built-in OHCI-USB adapter and an internally-connected GSM modem.
 614           The USB bus on these cards is not accessible externally.
 615
 616           Supported devices include (some of?) those made by:
 617           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 618
 619           To compile this driver as a module, choose M here: the
 620           module will be called option.
 621
 622           If this driver doesn't recognize your device,
 623           it might be accessible via the FTDI_SIO driver.
 624
 625 config USB_SERIAL_OMNINET
 626         tristate "USB ZyXEL omni.net LCD Plus Driver"
 627         help
 628           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called omninet.
 632
 633 config USB_SERIAL_OPTICON
 634         tristate "USB Opticon Barcode driver (serial mode)"
 635         help
 636           Say Y here if you want to use a Opticon USB Barcode device
 637           in serial emulation mode.
 638
 639           To compile this driver as a module, choose M here: the
 640           module will be called opticon.
 641
 642 config USB_SERIAL_VIVOPAY_SERIAL
 643         tristate "USB ViVOpay serial interface driver"
 644         help
 645           Say Y here if you want to use a ViVOtech ViVOpay USB device.
 646
 647           To compile this driver as a module, choose M here: the
 648           module will be called vivopay-serial.
 649
 650 config USB_SERIAL_XSENS_MT
 651         tristate "Xsens motion tracker serial interface driver"
 652         help
 653           Say Y here if you want to use Xsens motion trackers.
 654
 655           This driver supports the new generation of motion trackers
 656           by Xsens. Older devices can be accessed using the FTDI_SIO
 657           driver.
 658
 659           To compile this driver as a module, choose M here: the
 660           module will be called xsens_mt.
 661
 662 config USB_SERIAL_ZIO
 663         tristate "ZIO Motherboard USB serial interface driver"
 664         help
 665           Say Y here if you want to use ZIO Motherboard.
 666
 667           To compile this driver as a module, choose M here: the
 668           module will be called zio.
 669
 670 config USB_SERIAL_WISHBONE
 671         tristate "USB-Wishbone adapter interface driver"
 672         help
 673           Say Y here if you want to use a USB attached Wishbone bus.
 674
 675           Wishbone is an open hardware SoC bus commonly used in FPGA
 676           designs. Bus access can be serialized using the Etherbone
 677           protocol <http://www.ohwr.org/projects/etherbone-core>.
 678
 679           This driver is intended to be used with devices which attach
 680           their internal Wishbone bus to a USB serial interface using
 681           the Etherbone protocol. A userspace library is required to
 682           speak the protocol made available by this driver as ttyUSBx.
 683
 684           To compile this driver as a module, choose M here: the
 685           module will be called wishbone-serial.
 686
 687 config USB_SERIAL_ZTE
 688         tristate "ZTE USB serial driver"
 689         help
 690           Say Y here if you want to use a ZTE USB to serial device.
 691
 692           To compile this driver as a module, choose M here: the
 693           module will be called zte.
 694
 695 config USB_SERIAL_SSU100
 696         tristate "USB Quatech SSU-100 Single Port Serial Driver"
 697         help
 698           Say Y here if you want to use the Quatech SSU-100 single
 699           port usb to serial adapter.
 700
 701           To compile this driver as a module, choose M here: the
 702           module will be called ssu100.
 703
 704 config USB_SERIAL_QT2
 705         tristate "USB Quatech Serial Driver for USB 2 devices"
 706         help
 707           Say Y here if you want to use the Quatech USB 2
 708           serial adapters.
 709
 710           To compile this driver as a module, choose M here: the
 711           module will be called quatech-serial.
 712
 713 config USB_SERIAL_DEBUG
 714         tristate "USB Debugging Device"
 715         help
 716           Say Y here if you have a USB debugging device used to receive
 717           debugging data from another machine.  The most common of these
 718           devices is the NetChip TurboCONNECT device.
 719
 720           To compile this driver as a module, choose M here: the
 721           module will be called usb-debug.
 722
 723 endif # USB_SERIAL