drivers/usb/phy/phy-mv-u3d-usb.c

   1 /*
   2  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  */
   8
   9 #include <linux/module.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/clk.h>
  12 #include <linux/delay.h>
  13 #include <linux/err.h>
  14 #include <linux/io.h>
  15 #include <linux/usb/otg.h>
  16 #include <linux/platform_data/mv_usb.h>
  17
  18 #include "phy-mv-u3d-usb.h"
  19
  20 /*
  21  * struct mv_u3d_phy - transceiver driver state
  22  * @phy: transceiver structure
  23  * @dev: The parent device supplied to the probe function
  24  * @clk: usb phy clock
  25  * @base: usb phy register memory base
  26  */
  27 struct mv_u3d_phy {
  28         struct usb_phy  phy;
  29         struct mv_usb_platform_data *plat;
  30         struct device   *dev;
  31         struct clk      *clk;
  32         void __iomem    *base;
  33 };
  34
  35 static u32 mv_u3d_phy_read(void __iomem *base, u32 reg)
  36 {
  37         void __iomem *addr, *data;
  38
  39         addr = base;
  40         data = base + 0x4;
  41
  42         writel_relaxed(reg, addr);
  43         return readl_relaxed(data);
  44 }
  45
  46 static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value)
  47 {
  48         void __iomem *addr, *data;
  49         u32 tmp;
  50
  51         addr = base;
  52         data = base + 0x4;
  53
  54         writel_relaxed(reg, addr);
  55         tmp = readl_relaxed(data);
  56         tmp |= value;
  57         writel_relaxed(tmp, data);
  58 }
  59
  60 static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value)
  61 {
  62         void __iomem *addr, *data;
  63         u32 tmp;
  64
  65         addr = base;
  66         data = base + 0x4;
  67
  68         writel_relaxed(reg, addr);
  69         tmp = readl_relaxed(data);
  70         tmp &= ~value;
  71         writel_relaxed(tmp, data);
  72 }
  73
  74 static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value)
  75 {
  76         void __iomem *addr, *data;
  77
  78         addr = base;
  79         data = base + 0x4;
  80
  81         writel_relaxed(reg, addr);
  82         writel_relaxed(value, data);
  83 }
  84
  85 void mv_u3d_phy_shutdown(struct usb_phy *phy)
  86 {
  87         struct mv_u3d_phy *mv_u3d_phy;
  88         void __iomem *base;
  89         u32 val;
  90
  91         mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
  92         base = mv_u3d_phy->base;
  93
  94         /* Power down Reference Analog current, bit 15
  95          * Power down PLL, bit 14
  96          * Power down Receiver, bit 13
  97          * Power down Transmitter, bit 12
  98          * of USB3_POWER_PLL_CONTROL register
  99          */
 100         val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
 101         val &= ~(USB3_POWER_PLL_CONTROL_PU);
 102         mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
 103
 104         if (mv_u3d_phy->clk)
 105                 clk_disable(mv_u3d_phy->clk);
 106 }
 107
 108 static int mv_u3d_phy_init(struct usb_phy *phy)
 109 {
 110         struct mv_u3d_phy *mv_u3d_phy;
 111         void __iomem *base;
 112         u32 val, count;
 113
 114         /* enable usb3 phy */
 115         mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
 116
 117         if (mv_u3d_phy->clk)
 118                 clk_enable(mv_u3d_phy->clk);
 119
 120         base = mv_u3d_phy->base;
 121
 122         val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
 123         val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK);
 124         val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT;
 125         mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
 126         udelay(100);
 127
 128         mv_u3d_phy_write(base, USB3_RESET_CONTROL,
 129                         USB3_RESET_CONTROL_RESET_PIPE);
 130         udelay(100);
 131
 132         mv_u3d_phy_write(base, USB3_RESET_CONTROL,
 133                         USB3_RESET_CONTROL_RESET_PIPE
 134                         | USB3_RESET_CONTROL_RESET_PHY);
 135         udelay(100);
 136
 137         val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
 138         val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK
 139                 | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK);
 140         val |=  (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT)
 141                 | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT);
 142         mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
 143         udelay(100);
 144
 145         mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL,
 146                 USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK);
 147         udelay(100);
 148
 149         val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE);
 150         val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK
 151                 | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK
 152                 | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK);
 153         val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT)
 154                 | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT)
 155                 | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT));
 156         mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val);
 157         udelay(100);
 158
 159         val = mv_u3d_phy_read(base, USB3_GEN1_SET0);
 160         val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK;
 161         val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT;
 162         mv_u3d_phy_write(base, USB3_GEN1_SET0, val);
 163         udelay(100);
 164
 165         val = mv_u3d_phy_read(base, USB3_GEN2_SET0);
 166         val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK
 167                 | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK
 168                 | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK);
 169         val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT)
 170                 | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT)
 171                 | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT)
 172                 | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT));
 173         mv_u3d_phy_write(base, USB3_GEN2_SET0, val);
 174         udelay(100);
 175
 176         mv_u3d_phy_read(base, USB3_TX_EMPPH);
 177         val &= ~(USB3_TX_EMPPH_AMP_MASK
 178                 | USB3_TX_EMPPH_EN_MASK
 179                 | USB3_TX_EMPPH_AMP_FORCE_MASK
 180                 | USB3_TX_EMPPH_PAR1_MASK
 181                 | USB3_TX_EMPPH_PAR2_MASK);
 182         val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT)
 183                 | (1 << USB3_TX_EMPPH_EN_SHIFT)
 184                 | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT)
 185                 | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT)
 186                 | (1 << USB3_TX_EMPPH_PAR2_SHIFT));
 187
 188         mv_u3d_phy_write(base, USB3_TX_EMPPH, val);
 189         udelay(100);
 190
 191         val = mv_u3d_phy_read(base, USB3_GEN2_SET1);
 192         val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK
 193                 | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK
 194                 | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK
 195                 | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK);
 196         val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT)
 197                 | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT)
 198                 | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT)
 199                 | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT));
 200         mv_u3d_phy_write(base, USB3_GEN2_SET1, val);
 201         udelay(100);
 202
 203         val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN);
 204         val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK;
 205         val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT;
 206         mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val);
 207         udelay(100);
 208
 209         val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC);
 210         val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK;
 211         val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT;
 212         mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val);
 213         udelay(100);
 214
 215         val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL);
 216         val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK;
 217         val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT;
 218         mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val);
 219         udelay(100);
 220
 221         val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE);
 222         val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK
 223                 | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK
 224                 | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK);
 225         val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT)
 226                 | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT));
 227         mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val);
 228         udelay(100);
 229
 230         val = mv_u3d_phy_read(base, USB3_TXDETRX);
 231         val &= ~(USB3_TXDETRX_VTHSEL_MASK);
 232         val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT;
 233         mv_u3d_phy_write(base, USB3_TXDETRX, val);
 234         udelay(100);
 235
 236         dev_dbg(mv_u3d_phy->dev, "start calibration\n");
 237
 238 calstart:
 239         /* Perform Manual Calibration */
 240         mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL,
 241                 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT);
 242
 243         mdelay(1);
 244
 245         count = 0;
 246         while (1) {
 247                 val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL);
 248                 if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT))
 249                         break;
 250                 else if (count > 50) {
 251                         dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n");
 252                         goto calstart;
 253                 }
 254                 count++;
 255                 mdelay(1);
 256         }
 257
 258         /* active PIPE interface */
 259         mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL,
 260                 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE);
 261
 262         return 0;
 263 }
 264
 265 static int mv_u3d_phy_probe(struct platform_device *pdev)
 266 {
 267         struct mv_u3d_phy *mv_u3d_phy;
 268         struct mv_usb_platform_data *pdata;
 269         struct device *dev = &pdev->dev;
 270         struct resource *res;
 271         void __iomem    *phy_base;
 272         int     ret;
 273
 274         pdata = pdev->dev.platform_data;
 275         if (!pdata) {
 276                 dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
 277                 return -EINVAL;
 278         }
 279
 280         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 281         phy_base = devm_ioremap_resource(dev, res);
 282         if (IS_ERR(phy_base))
 283                 return PTR_ERR(phy_base);
 284
 285         mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL);
 286         if (!mv_u3d_phy)
 287                 return -ENOMEM;
 288
 289         mv_u3d_phy->dev                 = &pdev->dev;
 290         mv_u3d_phy->plat                = pdata;
 291         mv_u3d_phy->base                = phy_base;
 292         mv_u3d_phy->phy.dev             = mv_u3d_phy->dev;
 293         mv_u3d_phy->phy.label           = "mv-u3d-phy";
 294         mv_u3d_phy->phy.init            = mv_u3d_phy_init;
 295         mv_u3d_phy->phy.shutdown        = mv_u3d_phy_shutdown;
 296
 297         ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3);
 298         if (ret)
 299                 goto err;
 300
 301         if (!mv_u3d_phy->clk)
 302                 mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy");
 303
 304         platform_set_drvdata(pdev, mv_u3d_phy);
 305
 306         dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n");
 307 err:
 308         return ret;
 309 }
 310
 311 static int mv_u3d_phy_remove(struct platform_device *pdev)
 312 {
 313         struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev);
 314
 315         usb_remove_phy(&mv_u3d_phy->phy);
 316
 317         if (mv_u3d_phy->clk) {
 318                 clk_put(mv_u3d_phy->clk);
 319                 mv_u3d_phy->clk = NULL;
 320         }
 321
 322         return 0;
 323 }
 324
 325 static struct platform_driver mv_u3d_phy_driver = {
 326         .probe          = mv_u3d_phy_probe,
 327         .remove         = mv_u3d_phy_remove,
 328         .driver         = {
 329                 .name   = "mv-u3d-phy",
 330                 .owner  = THIS_MODULE,
 331         },
 332 };
 333
 334 module_platform_driver(mv_u3d_phy_driver);
 335 MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller");
 336 MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
 337 MODULE_LICENSE("GPL");
 338 MODULE_ALIAS("platform:mv-u3d-phy");