2 * xHCI host controller driver
4 * Copyright (C) 2008 Intel Corp.
7 * Some code borrowed from the Linux EHCI driver.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 * Ring initialization rules:
25 * 1. Each segment is initialized to zero, except for link TRBs.
26 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
27 * Consumer Cycle State (CCS), depending on ring function.
28 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
30 * Ring behavior rules:
31 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
32 * least one free TRB in the ring. This is useful if you want to turn that
33 * into a link TRB and expand the ring.
34 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
35 * link TRB, then load the pointer with the address in the link TRB. If the
36 * link TRB had its toggle bit set, you may need to update the ring cycle
37 * state (see cycle bit rules). You may have to do this multiple times
38 * until you reach a non-link TRB.
39 * 3. A ring is full if enqueue++ (for the definition of increment above)
40 * equals the dequeue pointer.
43 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
44 * in a link TRB, it must toggle the ring cycle state.
45 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
46 * in a link TRB, it must toggle the ring cycle state.
49 * 1. Check if ring is full before you enqueue.
50 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
51 * Update enqueue pointer between each write (which may update the ring
53 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
54 * and endpoint rings. If HC is the producer for the event ring,
55 * and it generates an interrupt according to interrupt modulation rules.
58 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
59 * the TRB is owned by the consumer.
60 * 2. Update dequeue pointer (which may update the ring cycle state) and
61 * continue processing TRBs until you reach a TRB which is not owned by you.
62 * 3. Notify the producer. SW is the consumer for the event ring, and it
63 * updates event ring dequeue pointer. HC is the consumer for the command and
64 * endpoint rings; it generates events on the event ring for these.
67 #include <linux/scatterlist.h>
68 #include <linux/slab.h>
71 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd
*xhci
,
72 struct xhci_virt_device
*virt_dev
,
73 struct xhci_event_cmd
*event
);
76 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
79 dma_addr_t
xhci_trb_virt_to_dma(struct xhci_segment
*seg
,
82 unsigned long segment_offset
;
84 if (!seg
|| !trb
|| trb
< seg
->trbs
)
87 segment_offset
= trb
- seg
->trbs
;
88 if (segment_offset
> TRBS_PER_SEGMENT
)
90 return seg
->dma
+ (segment_offset
* sizeof(*trb
));
93 /* Does this link TRB point to the first segment in a ring,
94 * or was the previous TRB the last TRB on the last segment in the ERST?
96 static bool last_trb_on_last_seg(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
97 struct xhci_segment
*seg
, union xhci_trb
*trb
)
99 if (ring
== xhci
->event_ring
)
100 return (trb
== &seg
->trbs
[TRBS_PER_SEGMENT
]) &&
101 (seg
->next
== xhci
->event_ring
->first_seg
);
103 return le32_to_cpu(trb
->link
.control
) & LINK_TOGGLE
;
106 /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
107 * segment? I.e. would the updated event TRB pointer step off the end of the
110 static int last_trb(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
111 struct xhci_segment
*seg
, union xhci_trb
*trb
)
113 if (ring
== xhci
->event_ring
)
114 return trb
== &seg
->trbs
[TRBS_PER_SEGMENT
];
116 return TRB_TYPE_LINK_LE32(trb
->link
.control
);
119 static int enqueue_is_link_trb(struct xhci_ring
*ring
)
121 struct xhci_link_trb
*link
= &ring
->enqueue
->link
;
122 return TRB_TYPE_LINK_LE32(link
->control
);
125 union xhci_trb
*xhci_find_next_enqueue(struct xhci_ring
*ring
)
127 /* Enqueue pointer can be left pointing to the link TRB,
128 * we must handle that
130 if (TRB_TYPE_LINK_LE32(ring
->enqueue
->link
.control
))
131 return ring
->enq_seg
->next
->trbs
;
132 return ring
->enqueue
;
135 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
136 * TRB is in a new segment. This does not skip over link TRBs, and it does not
137 * effect the ring dequeue or enqueue pointers.
139 static void next_trb(struct xhci_hcd
*xhci
,
140 struct xhci_ring
*ring
,
141 struct xhci_segment
**seg
,
142 union xhci_trb
**trb
)
144 if (last_trb(xhci
, ring
, *seg
, *trb
)) {
146 *trb
= ((*seg
)->trbs
);
153 * See Cycle bit rules. SW is the consumer for the event ring only.
154 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
156 static void inc_deq(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
)
158 unsigned long long addr
;
163 * If this is not event ring, and the dequeue pointer
164 * is not on a link TRB, there is one more usable TRB
166 if (ring
->type
!= TYPE_EVENT
&&
167 !last_trb(xhci
, ring
, ring
->deq_seg
, ring
->dequeue
))
168 ring
->num_trbs_free
++;
172 * Update the dequeue pointer further if that was a link TRB or
173 * we're at the end of an event ring segment (which doesn't have
176 if (last_trb(xhci
, ring
, ring
->deq_seg
, ring
->dequeue
)) {
177 if (ring
->type
== TYPE_EVENT
&&
178 last_trb_on_last_seg(xhci
, ring
,
179 ring
->deq_seg
, ring
->dequeue
)) {
180 ring
->cycle_state
= (ring
->cycle_state
? 0 : 1);
182 ring
->deq_seg
= ring
->deq_seg
->next
;
183 ring
->dequeue
= ring
->deq_seg
->trbs
;
187 } while (last_trb(xhci
, ring
, ring
->deq_seg
, ring
->dequeue
));
189 addr
= (unsigned long long) xhci_trb_virt_to_dma(ring
->deq_seg
, ring
->dequeue
);
193 * See Cycle bit rules. SW is the consumer for the event ring only.
194 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
196 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
197 * chain bit is set), then set the chain bit in all the following link TRBs.
198 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
199 * have their chain bit cleared (so that each Link TRB is a separate TD).
201 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
202 * set, but other sections talk about dealing with the chain bit set. This was
203 * fixed in the 0.96 specification errata, but we have to assume that all 0.95
204 * xHCI hardware can't handle the chain bit being cleared on a link TRB.
206 * @more_trbs_coming: Will you enqueue more TRBs before calling
207 * prepare_transfer()?
209 static void inc_enq(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
210 bool more_trbs_coming
)
213 union xhci_trb
*next
;
214 unsigned long long addr
;
216 chain
= le32_to_cpu(ring
->enqueue
->generic
.field
[3]) & TRB_CHAIN
;
217 /* If this is not event ring, there is one less usable TRB */
218 if (ring
->type
!= TYPE_EVENT
&&
219 !last_trb(xhci
, ring
, ring
->enq_seg
, ring
->enqueue
))
220 ring
->num_trbs_free
--;
221 next
= ++(ring
->enqueue
);
224 /* Update the dequeue pointer further if that was a link TRB or we're at
225 * the end of an event ring segment (which doesn't have link TRBS)
227 while (last_trb(xhci
, ring
, ring
->enq_seg
, next
)) {
228 if (ring
->type
!= TYPE_EVENT
) {
230 * If the caller doesn't plan on enqueueing more
231 * TDs before ringing the doorbell, then we
232 * don't want to give the link TRB to the
233 * hardware just yet. We'll give the link TRB
234 * back in prepare_ring() just before we enqueue
235 * the TD at the top of the ring.
237 if (!chain
&& !more_trbs_coming
)
240 /* If we're not dealing with 0.95 hardware or
241 * isoc rings on AMD 0.96 host,
242 * carry over the chain bit of the previous TRB
243 * (which may mean the chain bit is cleared).
245 #ifdef CONFIG_MTK_XHCI
246 if (!xhci_link_trb_quirk(xhci
)) {
248 if (!(ring
->type
== TYPE_ISOC
&&
249 (xhci
->quirks
& XHCI_AMD_0x96_HOST
))
250 && !xhci_link_trb_quirk(xhci
)) {
252 next
->link
.control
&=
253 cpu_to_le32(~TRB_CHAIN
);
254 next
->link
.control
|=
257 /* Give this link TRB to the hardware */
259 next
->link
.control
^= cpu_to_le32(TRB_CYCLE
);
261 /* Toggle the cycle bit after the last ring segment. */
262 if (last_trb_on_last_seg(xhci
, ring
, ring
->enq_seg
, next
)) {
263 ring
->cycle_state
= (ring
->cycle_state
? 0 : 1);
266 ring
->enq_seg
= ring
->enq_seg
->next
;
267 ring
->enqueue
= ring
->enq_seg
->trbs
;
268 next
= ring
->enqueue
;
270 addr
= (unsigned long long) xhci_trb_virt_to_dma(ring
->enq_seg
, ring
->enqueue
);
274 * Check to see if there's room to enqueue num_trbs on the ring and make sure
275 * enqueue pointer will not advance into dequeue segment. See rules above.
277 static inline int room_on_ring(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
278 unsigned int num_trbs
)
280 #ifndef CONFIG_MTK_XHCI
281 int num_trbs_in_deq_seg
;
284 if (ring
->num_trbs_free
< num_trbs
)
287 #ifndef CONFIG_MTK_XHCI
288 if (ring
->type
!= TYPE_COMMAND
&& ring
->type
!= TYPE_EVENT
) {
289 num_trbs_in_deq_seg
= ring
->dequeue
- ring
->deq_seg
->trbs
;
290 if (ring
->num_trbs_free
< num_trbs
+ num_trbs_in_deq_seg
)
298 /* Ring the host controller doorbell after placing a command on the ring */
299 void xhci_ring_cmd_db(struct xhci_hcd
*xhci
)
301 if (!(xhci
->cmd_ring_state
& CMD_RING_STATE_RUNNING
))
304 xhci_dbg(xhci
, "// Ding dong!\n");
305 xhci_writel(xhci
, DB_VALUE_HOST
, &xhci
->dba
->doorbell
[0]);
306 /* Flush PCI posted writes */
307 xhci_readl(xhci
, &xhci
->dba
->doorbell
[0]);
310 static int xhci_abort_cmd_ring(struct xhci_hcd
*xhci
)
315 xhci_dbg(xhci
, "Abort command ring\n");
317 if (!(xhci
->cmd_ring_state
& CMD_RING_STATE_RUNNING
)) {
318 xhci_dbg(xhci
, "The command ring isn't running, "
319 "Have the command ring been stopped?\n");
323 temp_64
= xhci_read_64(xhci
, &xhci
->op_regs
->cmd_ring
);
324 if (!(temp_64
& CMD_RING_RUNNING
)) {
325 xhci_dbg(xhci
, "Command ring had been stopped\n");
328 xhci
->cmd_ring_state
= CMD_RING_STATE_ABORTED
;
329 xhci_write_64(xhci
, temp_64
| CMD_RING_ABORT
,
330 &xhci
->op_regs
->cmd_ring
);
332 /* Section 4.6.1.2 of xHCI 1.0 spec says software should
333 * time the completion od all xHCI commands, including
334 * the Command Abort operation. If software doesn't see
335 * CRR negated in a timely manner (e.g. longer than 5
336 * seconds), then it should assume that the there are
337 * larger problems with the xHC and assert HCRST.
339 ret
= xhci_handshake(xhci
, &xhci
->op_regs
->cmd_ring
,
340 CMD_RING_RUNNING
, 0, 5 * 1000 * 1000);
342 xhci_err(xhci
, "Stopped the command ring failed, "
343 "maybe the host is dead\n");
344 xhci
->xhc_state
|= XHCI_STATE_DYING
;
353 static int xhci_queue_cd(struct xhci_hcd
*xhci
,
354 struct xhci_command
*command
,
355 union xhci_trb
*cmd_trb
)
358 cd
= kzalloc(sizeof(struct xhci_cd
), GFP_ATOMIC
);
361 INIT_LIST_HEAD(&cd
->cancel_cmd_list
);
363 cd
->command
= command
;
364 cd
->cmd_trb
= cmd_trb
;
365 list_add_tail(&cd
->cancel_cmd_list
, &xhci
->cancel_cmd_list
);
371 * Cancel the command which has issue.
373 * Some commands may hang due to waiting for acknowledgement from
374 * usb device. It is outside of the xHC's ability to control and
375 * will cause the command ring is blocked. When it occurs software
376 * should intervene to recover the command ring.
377 * See Section 4.6.1.1 and 4.6.1.2
379 int xhci_cancel_cmd(struct xhci_hcd
*xhci
, struct xhci_command
*command
,
380 union xhci_trb
*cmd_trb
)
385 spin_lock_irqsave(&xhci
->lock
, flags
);
387 if (xhci
->xhc_state
& XHCI_STATE_DYING
) {
388 xhci_warn(xhci
, "Abort the command ring,"
389 " but the xHCI is dead.\n");
394 /* queue the cmd desriptor to cancel_cmd_list */
395 retval
= xhci_queue_cd(xhci
, command
, cmd_trb
);
397 xhci_warn(xhci
, "Queuing command descriptor failed.\n");
401 /* abort command ring */
402 retval
= xhci_abort_cmd_ring(xhci
);
404 xhci_err(xhci
, "Abort command ring failed\n");
405 if (unlikely(retval
== -ESHUTDOWN
)) {
406 spin_unlock_irqrestore(&xhci
->lock
, flags
);
407 usb_hc_died(xhci_to_hcd(xhci
)->primary_hcd
);
408 xhci_dbg(xhci
, "xHCI host controller is dead.\n");
414 spin_unlock_irqrestore(&xhci
->lock
, flags
);
418 void xhci_ring_ep_doorbell(struct xhci_hcd
*xhci
,
419 unsigned int slot_id
,
420 unsigned int ep_index
,
421 unsigned int stream_id
)
423 __le32 __iomem
*db_addr
= &xhci
->dba
->doorbell
[slot_id
];
424 struct xhci_virt_ep
*ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
425 unsigned int ep_state
= ep
->ep_state
;
427 /* Don't ring the doorbell for this endpoint if there are pending
428 * cancellations because we don't want to interrupt processing.
429 * We don't want to restart any stream rings if there's a set dequeue
430 * pointer command pending because the device can choose to start any
431 * stream once the endpoint is on the HW schedule.
432 * FIXME - check all the stream rings for pending cancellations.
434 if ((ep_state
& EP_HALT_PENDING
) || (ep_state
& SET_DEQ_PENDING
) ||
435 (ep_state
& EP_HALTED
))
437 xhci_writel(xhci
, DB_VALUE(ep_index
, stream_id
), db_addr
);
438 /* The CPU has better things to do at this point than wait for a
439 * write-posting flush. It'll get there soon enough.
443 /* Ring the doorbell for any rings with pending URBs */
444 static void ring_doorbell_for_active_rings(struct xhci_hcd
*xhci
,
445 unsigned int slot_id
,
446 unsigned int ep_index
)
448 unsigned int stream_id
;
449 struct xhci_virt_ep
*ep
;
451 ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
453 /* A ring has pending URBs if its TD list is not empty */
454 if (!(ep
->ep_state
& EP_HAS_STREAMS
)) {
455 if (ep
->ring
&& !(list_empty(&ep
->ring
->td_list
)))
456 xhci_ring_ep_doorbell(xhci
, slot_id
, ep_index
, 0);
460 for (stream_id
= 1; stream_id
< ep
->stream_info
->num_streams
;
462 struct xhci_stream_info
*stream_info
= ep
->stream_info
;
463 if (!list_empty(&stream_info
->stream_rings
[stream_id
]->td_list
))
464 xhci_ring_ep_doorbell(xhci
, slot_id
, ep_index
,
470 * Find the segment that trb is in. Start searching in start_seg.
471 * If we must move past a segment that has a link TRB with a toggle cycle state
472 * bit set, then we will toggle the value pointed at by cycle_state.
474 static struct xhci_segment
*find_trb_seg(
475 struct xhci_segment
*start_seg
,
476 union xhci_trb
*trb
, int *cycle_state
)
478 struct xhci_segment
*cur_seg
= start_seg
;
479 struct xhci_generic_trb
*generic_trb
;
481 while (cur_seg
->trbs
> trb
||
482 &cur_seg
->trbs
[TRBS_PER_SEGMENT
- 1] < trb
) {
483 generic_trb
= &cur_seg
->trbs
[TRBS_PER_SEGMENT
- 1].generic
;
484 if (generic_trb
->field
[3] & cpu_to_le32(LINK_TOGGLE
))
486 cur_seg
= cur_seg
->next
;
487 if (cur_seg
== start_seg
)
488 /* Looped over the entire list. Oops! */
495 static struct xhci_ring
*xhci_triad_to_transfer_ring(struct xhci_hcd
*xhci
,
496 unsigned int slot_id
, unsigned int ep_index
,
497 unsigned int stream_id
)
499 struct xhci_virt_ep
*ep
;
501 ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
502 /* Common case: no streams */
503 if (!(ep
->ep_state
& EP_HAS_STREAMS
))
506 if (stream_id
== 0) {
508 "WARN: Slot ID %u, ep index %u has streams, "
509 "but URB has no stream ID.\n",
514 if (stream_id
< ep
->stream_info
->num_streams
)
515 return ep
->stream_info
->stream_rings
[stream_id
];
518 "WARN: Slot ID %u, ep index %u has "
519 "stream IDs 1 to %u allocated, "
520 "but stream ID %u is requested.\n",
522 ep
->stream_info
->num_streams
- 1,
527 /* Get the right ring for the given URB.
528 * If the endpoint supports streams, boundary check the URB's stream ID.
529 * If the endpoint doesn't support streams, return the singular endpoint ring.
531 static struct xhci_ring
*xhci_urb_to_transfer_ring(struct xhci_hcd
*xhci
,
534 return xhci_triad_to_transfer_ring(xhci
, urb
->dev
->slot_id
,
535 xhci_get_endpoint_index(&urb
->ep
->desc
), urb
->stream_id
);
539 * Move the xHC's endpoint ring dequeue pointer past cur_td.
540 * Record the new state of the xHC's endpoint ring dequeue segment,
541 * dequeue pointer, and new consumer cycle state in state.
542 * Update our internal representation of the ring's dequeue pointer.
544 * We do this in three jumps:
545 * - First we update our new ring state to be the same as when the xHC stopped.
546 * - Then we traverse the ring to find the segment that contains
547 * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
548 * any link TRBs with the toggle cycle bit set.
549 * - Finally we move the dequeue state one TRB further, toggling the cycle bit
550 * if we've moved it past a link TRB with the toggle cycle bit set.
552 * Some of the uses of xhci_generic_trb are grotty, but if they're done
553 * with correct __le32 accesses they should work fine. Only users of this are
556 void xhci_find_new_dequeue_state(struct xhci_hcd
*xhci
,
557 unsigned int slot_id
, unsigned int ep_index
,
558 unsigned int stream_id
, struct xhci_td
*cur_td
,
559 struct xhci_dequeue_state
*state
)
561 struct xhci_virt_device
*dev
= xhci
->devs
[slot_id
];
562 struct xhci_ring
*ep_ring
;
563 struct xhci_generic_trb
*trb
;
564 struct xhci_ep_ctx
*ep_ctx
;
567 ep_ring
= xhci_triad_to_transfer_ring(xhci
, slot_id
,
568 ep_index
, stream_id
);
570 xhci_warn(xhci
, "WARN can't find new dequeue state "
571 "for invalid stream ID %u.\n",
575 state
->new_cycle_state
= 0;
576 xhci_dbg(xhci
, "Finding segment containing stopped TRB.\n");
577 state
->new_deq_seg
= find_trb_seg(cur_td
->start_seg
,
578 dev
->eps
[ep_index
].stopped_trb
,
579 &state
->new_cycle_state
);
580 if (!state
->new_deq_seg
) {
585 /* Dig out the cycle state saved by the xHC during the stop ep cmd */
586 xhci_dbg(xhci
, "Finding endpoint context\n");
587 ep_ctx
= xhci_get_ep_ctx(xhci
, dev
->out_ctx
, ep_index
);
588 state
->new_cycle_state
= 0x1 & le64_to_cpu(ep_ctx
->deq
);
590 state
->new_deq_ptr
= cur_td
->last_trb
;
591 xhci_dbg(xhci
, "Finding segment containing last TRB in TD.\n");
592 state
->new_deq_seg
= find_trb_seg(state
->new_deq_seg
,
594 &state
->new_cycle_state
);
595 if (!state
->new_deq_seg
) {
600 trb
= &state
->new_deq_ptr
->generic
;
601 if (TRB_TYPE_LINK_LE32(trb
->field
[3]) &&
602 (trb
->field
[3] & cpu_to_le32(LINK_TOGGLE
)))
603 state
->new_cycle_state
^= 0x1;
604 next_trb(xhci
, ep_ring
, &state
->new_deq_seg
, &state
->new_deq_ptr
);
607 * If there is only one segment in a ring, find_trb_seg()'s while loop
608 * will not run, and it will return before it has a chance to see if it
609 * needs to toggle the cycle bit. It can't tell if the stalled transfer
610 * ended just before the link TRB on a one-segment ring, or if the TD
611 * wrapped around the top of the ring, because it doesn't have the TD in
612 * question. Look for the one-segment case where stalled TRB's address
613 * is greater than the new dequeue pointer address.
615 if (ep_ring
->first_seg
== ep_ring
->first_seg
->next
&&
616 state
->new_deq_ptr
< dev
->eps
[ep_index
].stopped_trb
)
617 state
->new_cycle_state
^= 0x1;
618 xhci_dbg(xhci
, "Cycle state = 0x%x\n", state
->new_cycle_state
);
620 /* Don't update the ring cycle state for the producer (us). */
621 xhci_dbg(xhci
, "New dequeue segment = %p (virtual)\n",
623 addr
= xhci_trb_virt_to_dma(state
->new_deq_seg
, state
->new_deq_ptr
);
624 xhci_dbg(xhci
, "New dequeue pointer = 0x%llx (DMA)\n",
625 (unsigned long long) addr
);
628 /* flip_cycle means flip the cycle bit of all but the first and last TRB.
629 * (The last TRB actually points to the ring enqueue pointer, which is not part
630 * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
632 static void td_to_noop(struct xhci_hcd
*xhci
, struct xhci_ring
*ep_ring
,
633 struct xhci_td
*cur_td
, bool flip_cycle
)
635 struct xhci_segment
*cur_seg
;
636 union xhci_trb
*cur_trb
;
638 for (cur_seg
= cur_td
->start_seg
, cur_trb
= cur_td
->first_trb
;
640 next_trb(xhci
, ep_ring
, &cur_seg
, &cur_trb
)) {
641 if (TRB_TYPE_LINK_LE32(cur_trb
->generic
.field
[3])) {
642 /* Unchain any chained Link TRBs, but
643 * leave the pointers intact.
645 cur_trb
->generic
.field
[3] &= cpu_to_le32(~TRB_CHAIN
);
646 /* Flip the cycle bit (link TRBs can't be the first
650 cur_trb
->generic
.field
[3] ^=
651 cpu_to_le32(TRB_CYCLE
);
652 xhci_dbg(xhci
, "Cancel (unchain) link TRB\n");
653 xhci_dbg(xhci
, "Address = %p (0x%llx dma); "
654 "in seg %p (0x%llx dma)\n",
656 (unsigned long long)xhci_trb_virt_to_dma(cur_seg
, cur_trb
),
658 (unsigned long long)cur_seg
->dma
);
660 cur_trb
->generic
.field
[0] = 0;
661 cur_trb
->generic
.field
[1] = 0;
662 cur_trb
->generic
.field
[2] = 0;
663 /* Preserve only the cycle bit of this TRB */
664 cur_trb
->generic
.field
[3] &= cpu_to_le32(TRB_CYCLE
);
665 /* Flip the cycle bit except on the first or last TRB */
666 if (flip_cycle
&& cur_trb
!= cur_td
->first_trb
&&
667 cur_trb
!= cur_td
->last_trb
)
668 cur_trb
->generic
.field
[3] ^=
669 cpu_to_le32(TRB_CYCLE
);
670 cur_trb
->generic
.field
[3] |= cpu_to_le32(
671 TRB_TYPE(TRB_TR_NOOP
));
672 xhci_dbg(xhci
, "TRB to noop at offset 0x%llx\n",
674 xhci_trb_virt_to_dma(cur_seg
, cur_trb
));
676 if (cur_trb
== cur_td
->last_trb
)
681 static int queue_set_tr_deq(struct xhci_hcd
*xhci
, int slot_id
,
682 unsigned int ep_index
, unsigned int stream_id
,
683 struct xhci_segment
*deq_seg
,
684 union xhci_trb
*deq_ptr
, u32 cycle_state
);
686 void xhci_queue_new_dequeue_state(struct xhci_hcd
*xhci
,
687 unsigned int slot_id
, unsigned int ep_index
,
688 unsigned int stream_id
,
689 struct xhci_dequeue_state
*deq_state
)
691 struct xhci_virt_ep
*ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
693 xhci_dbg(xhci
, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
694 "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
695 deq_state
->new_deq_seg
,
696 (unsigned long long)deq_state
->new_deq_seg
->dma
,
697 deq_state
->new_deq_ptr
,
698 (unsigned long long)xhci_trb_virt_to_dma(deq_state
->new_deq_seg
, deq_state
->new_deq_ptr
),
699 deq_state
->new_cycle_state
);
700 queue_set_tr_deq(xhci
, slot_id
, ep_index
, stream_id
,
701 deq_state
->new_deq_seg
,
702 deq_state
->new_deq_ptr
,
703 (u32
) deq_state
->new_cycle_state
);
704 /* Stop the TD queueing code from ringing the doorbell until
705 * this command completes. The HC won't set the dequeue pointer
706 * if the ring is running, and ringing the doorbell starts the
709 ep
->ep_state
|= SET_DEQ_PENDING
;
712 static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd
*xhci
,
713 struct xhci_virt_ep
*ep
)
715 ep
->ep_state
&= ~EP_HALT_PENDING
;
716 /* Can't del_timer_sync in interrupt, so we attempt to cancel. If the
717 * timer is running on another CPU, we don't decrement stop_cmds_pending
718 * (since we didn't successfully stop the watchdog timer).
720 if (del_timer(&ep
->stop_cmd_timer
))
721 ep
->stop_cmds_pending
--;
724 /* Must be called with xhci->lock held in interrupt context */
725 static void xhci_giveback_urb_in_irq(struct xhci_hcd
*xhci
,
726 struct xhci_td
*cur_td
, int status
, char *adjective
)
730 struct urb_priv
*urb_priv
;
733 urb_priv
= urb
->hcpriv
;
735 hcd
= bus_to_hcd(urb
->dev
->bus
);
737 /* Only giveback urb when this is the last td in urb */
738 if (urb_priv
->td_cnt
== urb_priv
->length
) {
739 if (usb_pipetype(urb
->pipe
) == PIPE_ISOCHRONOUS
) {
740 xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
--;
741 #ifndef CONFIG_MTK_XHCI
742 if (xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
== 0) {
743 if (xhci
->quirks
& XHCI_AMD_PLL_FIX
)
744 usb_amd_quirk_pll_enable();
748 usb_hcd_unlink_urb_from_ep(hcd
, urb
);
750 spin_unlock(&xhci
->lock
);
751 usb_hcd_giveback_urb(hcd
, urb
, status
);
752 xhci_urb_free_priv(xhci
, urb_priv
);
753 spin_lock(&xhci
->lock
);
758 * When we get a command completion for a Stop Endpoint Command, we need to
759 * unlink any cancelled TDs from the ring. There are two ways to do that:
761 * 1. If the HW was in the middle of processing the TD that needs to be
762 * cancelled, then we must move the ring's dequeue pointer past the last TRB
763 * in the TD with a Set Dequeue Pointer Command.
764 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
765 * bit cleared) so that the HW will skip over them.
767 static void handle_stopped_endpoint(struct xhci_hcd
*xhci
,
768 union xhci_trb
*trb
, struct xhci_event_cmd
*event
)
770 unsigned int slot_id
;
771 unsigned int ep_index
;
772 struct xhci_virt_device
*virt_dev
;
773 struct xhci_ring
*ep_ring
;
774 struct xhci_virt_ep
*ep
;
775 struct list_head
*entry
;
776 struct xhci_td
*cur_td
= NULL
;
777 struct xhci_td
*last_unlinked_td
;
779 struct xhci_dequeue_state deq_state
;
781 if (unlikely(TRB_TO_SUSPEND_PORT(
782 le32_to_cpu(xhci
->cmd_ring
->dequeue
->generic
.field
[3])))) {
783 slot_id
= TRB_TO_SLOT_ID(
784 le32_to_cpu(xhci
->cmd_ring
->dequeue
->generic
.field
[3]));
785 virt_dev
= xhci
->devs
[slot_id
];
787 handle_cmd_in_cmd_wait_list(xhci
, virt_dev
,
790 xhci_warn(xhci
, "Stop endpoint command "
791 "completion for disabled slot %u\n",
796 memset(&deq_state
, 0, sizeof(deq_state
));
797 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(trb
->generic
.field
[3]));
798 ep_index
= TRB_TO_EP_INDEX(le32_to_cpu(trb
->generic
.field
[3]));
799 ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
801 if (list_empty(&ep
->cancelled_td_list
)) {
802 xhci_stop_watchdog_timer_in_irq(xhci
, ep
);
803 ep
->stopped_td
= NULL
;
804 ep
->stopped_trb
= NULL
;
805 ring_doorbell_for_active_rings(xhci
, slot_id
, ep_index
);
809 /* Fix up the ep ring first, so HW stops executing cancelled TDs.
810 * We have the xHCI lock, so nothing can modify this list until we drop
811 * it. We're also in the event handler, so we can't get re-interrupted
812 * if another Stop Endpoint command completes
814 list_for_each(entry
, &ep
->cancelled_td_list
) {
815 cur_td
= list_entry(entry
, struct xhci_td
, cancelled_td_list
);
816 xhci_dbg(xhci
, "Removing canceled TD starting at 0x%llx (dma).\n",
817 (unsigned long long)xhci_trb_virt_to_dma(
818 cur_td
->start_seg
, cur_td
->first_trb
));
819 ep_ring
= xhci_urb_to_transfer_ring(xhci
, cur_td
->urb
);
821 /* This shouldn't happen unless a driver is mucking
822 * with the stream ID after submission. This will
823 * leave the TD on the hardware ring, and the hardware
824 * will try to execute it, and may access a buffer
825 * that has already been freed. In the best case, the
826 * hardware will execute it, and the event handler will
827 * ignore the completion event for that TD, since it was
828 * removed from the td_list for that endpoint. In
829 * short, don't muck with the stream ID after
832 xhci_warn(xhci
, "WARN Cancelled URB %p "
833 "has invalid stream ID %u.\n",
835 cur_td
->urb
->stream_id
);
836 goto remove_finished_td
;
839 * If we stopped on the TD we need to cancel, then we have to
840 * move the xHC endpoint ring dequeue pointer past this TD.
842 if (cur_td
== ep
->stopped_td
)
843 xhci_find_new_dequeue_state(xhci
, slot_id
, ep_index
,
844 cur_td
->urb
->stream_id
,
847 td_to_noop(xhci
, ep_ring
, cur_td
, false);
850 * The event handler won't see a completion for this TD anymore,
851 * so remove it from the endpoint ring's TD list. Keep it in
852 * the cancelled TD list for URB completion later.
854 list_del_init(&cur_td
->td_list
);
856 last_unlinked_td
= cur_td
;
857 xhci_stop_watchdog_timer_in_irq(xhci
, ep
);
859 /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
860 if (deq_state
.new_deq_ptr
&& deq_state
.new_deq_seg
) {
861 xhci_queue_new_dequeue_state(xhci
,
863 ep
->stopped_td
->urb
->stream_id
,
865 xhci_ring_cmd_db(xhci
);
867 /* Otherwise ring the doorbell(s) to restart queued transfers */
868 ring_doorbell_for_active_rings(xhci
, slot_id
, ep_index
);
871 /* Clear stopped_td and stopped_trb if endpoint is not halted */
872 if (!(ep
->ep_state
& EP_HALTED
)) {
873 ep
->stopped_td
= NULL
;
874 ep
->stopped_trb
= NULL
;
878 * Drop the lock and complete the URBs in the cancelled TD list.
879 * New TDs to be cancelled might be added to the end of the list before
880 * we can complete all the URBs for the TDs we already unlinked.
881 * So stop when we've completed the URB for the last TD we unlinked.
884 cur_td
= list_entry(ep
->cancelled_td_list
.next
,
885 struct xhci_td
, cancelled_td_list
);
886 list_del_init(&cur_td
->cancelled_td_list
);
888 /* Clean up the cancelled URB */
889 /* Doesn't matter what we pass for status, since the core will
890 * just overwrite it (because the URB has been unlinked).
892 xhci_giveback_urb_in_irq(xhci
, cur_td
, 0, "cancelled");
894 /* Stop processing the cancelled list if the watchdog timer is
897 if (xhci
->xhc_state
& XHCI_STATE_DYING
)
899 } while (cur_td
!= last_unlinked_td
);
901 /* Return to the event handler with xhci->lock re-acquired */
904 /* Watchdog timer function for when a stop endpoint command fails to complete.
905 * In this case, we assume the host controller is broken or dying or dead. The
906 * host may still be completing some other events, so we have to be careful to
907 * let the event ring handler and the URB dequeueing/enqueueing functions know
908 * through xhci->state.
910 * The timer may also fire if the host takes a very long time to respond to the
911 * command, and the stop endpoint command completion handler cannot delete the
912 * timer before the timer function is called. Another endpoint cancellation may
913 * sneak in before the timer function can grab the lock, and that may queue
914 * another stop endpoint command and add the timer back. So we cannot use a
915 * simple flag to say whether there is a pending stop endpoint command for a
916 * particular endpoint.
918 * Instead we use a combination of that flag and a counter for the number of
919 * pending stop endpoint commands. If the timer is the tail end of the last
920 * stop endpoint command, and the endpoint's command is still pending, we assume
923 void xhci_stop_endpoint_command_watchdog(unsigned long arg
)
925 struct xhci_hcd
*xhci
;
926 struct xhci_virt_ep
*ep
;
927 struct xhci_virt_ep
*temp_ep
;
928 struct xhci_ring
*ring
;
929 struct xhci_td
*cur_td
;
933 ep
= (struct xhci_virt_ep
*) arg
;
936 spin_lock_irqsave(&xhci
->lock
, flags
);
938 ep
->stop_cmds_pending
--;
939 if (xhci
->xhc_state
& XHCI_STATE_DYING
) {
940 xhci_dbg(xhci
, "Stop EP timer ran, but another timer marked "
941 "xHCI as DYING, exiting.\n");
942 spin_unlock_irqrestore(&xhci
->lock
, flags
);
945 if (!(ep
->stop_cmds_pending
== 0 && (ep
->ep_state
& EP_HALT_PENDING
))) {
946 xhci_dbg(xhci
, "Stop EP timer ran, but no command pending, "
948 spin_unlock_irqrestore(&xhci
->lock
, flags
);
952 xhci_warn(xhci
, "xHCI host not responding to stop endpoint command.\n");
953 xhci_warn(xhci
, "Assuming host is dying, halting host.\n");
954 /* Oops, HC is dead or dying or at least not responding to the stop
957 xhci
->xhc_state
|= XHCI_STATE_DYING
;
958 /* Disable interrupts from the host controller and start halting it */
960 spin_unlock_irqrestore(&xhci
->lock
, flags
);
962 ret
= xhci_halt(xhci
);
964 spin_lock_irqsave(&xhci
->lock
, flags
);
966 /* This is bad; the host is not responding to commands and it's
967 * not allowing itself to be halted. At least interrupts are
968 * disabled. If we call usb_hc_died(), it will attempt to
969 * disconnect all device drivers under this host. Those
970 * disconnect() methods will wait for all URBs to be unlinked,
971 * so we must complete them.
973 xhci_warn(xhci
, "Non-responsive xHCI host is not halting.\n");
974 xhci_warn(xhci
, "Completing active URBs anyway.\n");
975 /* We could turn all TDs on the rings to no-ops. This won't
976 * help if the host has cached part of the ring, and is slow if
977 * we want to preserve the cycle bit. Skip it and hope the host
978 * doesn't touch the memory.
981 for (i
= 0; i
< MAX_HC_SLOTS
; i
++) {
984 for (j
= 0; j
< 31; j
++) {
985 temp_ep
= &xhci
->devs
[i
]->eps
[j
];
986 ring
= temp_ep
->ring
;
989 xhci_dbg(xhci
, "Killing URBs for slot ID %u, "
990 "ep index %u\n", i
, j
);
991 while (!list_empty(&ring
->td_list
)) {
992 cur_td
= list_first_entry(&ring
->td_list
,
995 list_del_init(&cur_td
->td_list
);
996 if (!list_empty(&cur_td
->cancelled_td_list
))
997 list_del_init(&cur_td
->cancelled_td_list
);
998 xhci_giveback_urb_in_irq(xhci
, cur_td
,
999 -ESHUTDOWN
, "killed");
1001 while (!list_empty(&temp_ep
->cancelled_td_list
)) {
1002 cur_td
= list_first_entry(
1003 &temp_ep
->cancelled_td_list
,
1006 list_del_init(&cur_td
->cancelled_td_list
);
1007 xhci_giveback_urb_in_irq(xhci
, cur_td
,
1008 -ESHUTDOWN
, "killed");
1012 spin_unlock_irqrestore(&xhci
->lock
, flags
);
1013 xhci_dbg(xhci
, "Calling usb_hc_died()\n");
1014 usb_hc_died(xhci_to_hcd(xhci
)->primary_hcd
);
1015 xhci_dbg(xhci
, "xHCI host controller is dead.\n");
1019 static void update_ring_for_set_deq_completion(struct xhci_hcd
*xhci
,
1020 struct xhci_virt_device
*dev
,
1021 struct xhci_ring
*ep_ring
,
1022 unsigned int ep_index
)
1024 union xhci_trb
*dequeue_temp
;
1025 int num_trbs_free_temp
;
1026 bool revert
= false;
1028 num_trbs_free_temp
= ep_ring
->num_trbs_free
;
1029 dequeue_temp
= ep_ring
->dequeue
;
1031 /* If we get two back-to-back stalls, and the first stalled transfer
1032 * ends just before a link TRB, the dequeue pointer will be left on
1033 * the link TRB by the code in the while loop. So we have to update
1034 * the dequeue pointer one segment further, or we'll jump off
1035 * the segment into la-la-land.
1037 if (last_trb(xhci
, ep_ring
, ep_ring
->deq_seg
, ep_ring
->dequeue
)) {
1038 ep_ring
->deq_seg
= ep_ring
->deq_seg
->next
;
1039 ep_ring
->dequeue
= ep_ring
->deq_seg
->trbs
;
1042 while (ep_ring
->dequeue
!= dev
->eps
[ep_index
].queued_deq_ptr
) {
1043 /* We have more usable TRBs */
1044 ep_ring
->num_trbs_free
++;
1046 if (last_trb(xhci
, ep_ring
, ep_ring
->deq_seg
,
1047 ep_ring
->dequeue
)) {
1048 if (ep_ring
->dequeue
==
1049 dev
->eps
[ep_index
].queued_deq_ptr
)
1051 ep_ring
->deq_seg
= ep_ring
->deq_seg
->next
;
1052 ep_ring
->dequeue
= ep_ring
->deq_seg
->trbs
;
1054 if (ep_ring
->dequeue
== dequeue_temp
) {
1061 xhci_dbg(xhci
, "Unable to find new dequeue pointer\n");
1062 ep_ring
->num_trbs_free
= num_trbs_free_temp
;
1067 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
1068 * we need to clear the set deq pending flag in the endpoint ring state, so that
1069 * the TD queueing code can ring the doorbell again. We also need to ring the
1070 * endpoint doorbell to restart the ring, but only if there aren't more
1071 * cancellations pending.
1073 static void handle_set_deq_completion(struct xhci_hcd
*xhci
,
1074 struct xhci_event_cmd
*event
,
1075 union xhci_trb
*trb
)
1077 unsigned int slot_id
;
1078 unsigned int ep_index
;
1079 unsigned int stream_id
;
1080 struct xhci_ring
*ep_ring
;
1081 struct xhci_virt_device
*dev
;
1082 struct xhci_ep_ctx
*ep_ctx
;
1083 struct xhci_slot_ctx
*slot_ctx
;
1085 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(trb
->generic
.field
[3]));
1086 ep_index
= TRB_TO_EP_INDEX(le32_to_cpu(trb
->generic
.field
[3]));
1087 stream_id
= TRB_TO_STREAM_ID(le32_to_cpu(trb
->generic
.field
[2]));
1088 dev
= xhci
->devs
[slot_id
];
1090 ep_ring
= xhci_stream_id_to_ring(dev
, ep_index
, stream_id
);
1092 xhci_warn(xhci
, "WARN Set TR deq ptr command for "
1093 "freed stream ID %u\n",
1095 /* XXX: Harmless??? */
1096 dev
->eps
[ep_index
].ep_state
&= ~SET_DEQ_PENDING
;
1100 ep_ctx
= xhci_get_ep_ctx(xhci
, dev
->out_ctx
, ep_index
);
1101 slot_ctx
= xhci_get_slot_ctx(xhci
, dev
->out_ctx
);
1103 if (GET_COMP_CODE(le32_to_cpu(event
->status
)) != COMP_SUCCESS
) {
1104 unsigned int ep_state
;
1105 unsigned int slot_state
;
1107 switch (GET_COMP_CODE(le32_to_cpu(event
->status
))) {
1109 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd invalid because "
1110 "of stream ID configuration\n");
1112 case COMP_CTX_STATE
:
1113 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd failed due "
1114 "to incorrect slot or ep state.\n");
1115 ep_state
= le32_to_cpu(ep_ctx
->ep_info
);
1116 ep_state
&= EP_STATE_MASK
;
1117 slot_state
= le32_to_cpu(slot_ctx
->dev_state
);
1118 slot_state
= GET_SLOT_STATE(slot_state
);
1119 xhci_dbg(xhci
, "Slot state = %u, EP state = %u\n",
1120 slot_state
, ep_state
);
1123 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd failed because "
1124 "slot %u was not enabled.\n", slot_id
);
1127 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd with unknown "
1128 "completion code of %u.\n",
1129 GET_COMP_CODE(le32_to_cpu(event
->status
)));
1132 /* OK what do we do now? The endpoint state is hosed, and we
1133 * should never get to this point if the synchronization between
1134 * queueing, and endpoint state are correct. This might happen
1135 * if the device gets disconnected after we've finished
1136 * cancelling URBs, which might not be an error...
1139 xhci_dbg(xhci
, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
1140 le64_to_cpu(ep_ctx
->deq
));
1141 if (xhci_trb_virt_to_dma(dev
->eps
[ep_index
].queued_deq_seg
,
1142 dev
->eps
[ep_index
].queued_deq_ptr
) ==
1143 (le64_to_cpu(ep_ctx
->deq
) & ~(EP_CTX_CYCLE_MASK
))) {
1144 /* Update the ring's dequeue segment and dequeue pointer
1145 * to reflect the new position.
1147 update_ring_for_set_deq_completion(xhci
, dev
,
1150 xhci_warn(xhci
, "Mismatch between completed Set TR Deq "
1151 "Ptr command & xHCI internal state.\n");
1152 xhci_warn(xhci
, "ep deq seg = %p, deq ptr = %p\n",
1153 dev
->eps
[ep_index
].queued_deq_seg
,
1154 dev
->eps
[ep_index
].queued_deq_ptr
);
1158 dev
->eps
[ep_index
].ep_state
&= ~SET_DEQ_PENDING
;
1159 dev
->eps
[ep_index
].queued_deq_seg
= NULL
;
1160 dev
->eps
[ep_index
].queued_deq_ptr
= NULL
;
1161 /* Restart any rings with pending URBs */
1162 ring_doorbell_for_active_rings(xhci
, slot_id
, ep_index
);
1165 static void handle_reset_ep_completion(struct xhci_hcd
*xhci
,
1166 struct xhci_event_cmd
*event
,
1167 union xhci_trb
*trb
)
1170 unsigned int ep_index
;
1172 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(trb
->generic
.field
[3]));
1173 ep_index
= TRB_TO_EP_INDEX(le32_to_cpu(trb
->generic
.field
[3]));
1174 /* This command will only fail if the endpoint wasn't halted,
1175 * but we don't care.
1177 xhci_dbg(xhci
, "Ignoring reset ep completion code of %u\n",
1178 GET_COMP_CODE(le32_to_cpu(event
->status
)));
1180 /* HW with the reset endpoint quirk needs to have a configure endpoint
1181 * command complete before the endpoint can be used. Queue that here
1182 * because the HW can't handle two commands being queued in a row.
1184 if (xhci
->quirks
& XHCI_RESET_EP_QUIRK
) {
1185 xhci_dbg(xhci
, "Queueing configure endpoint command\n");
1186 xhci_queue_configure_endpoint(xhci
,
1187 xhci
->devs
[slot_id
]->in_ctx
->dma
, slot_id
,
1189 xhci_ring_cmd_db(xhci
);
1191 /* Clear our internal halted state */
1192 xhci
->devs
[slot_id
]->eps
[ep_index
].ep_state
&= ~EP_HALTED
;
1196 /* Complete the command and detele it from the devcie's command queue.
1198 static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd
*xhci
,
1199 struct xhci_command
*command
, u32 status
)
1201 command
->status
= status
;
1202 list_del(&command
->cmd_list
);
1203 if (command
->completion
)
1204 complete(command
->completion
);
1206 xhci_free_command(xhci
, command
);
1210 /* Check to see if a command in the device's command queue matches this one.
1211 * Signal the completion or free the command, and return 1. Return 0 if the
1212 * completed command isn't at the head of the command list.
1214 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd
*xhci
,
1215 struct xhci_virt_device
*virt_dev
,
1216 struct xhci_event_cmd
*event
)
1218 struct xhci_command
*command
;
1220 if (list_empty(&virt_dev
->cmd_list
))
1223 command
= list_entry(virt_dev
->cmd_list
.next
,
1224 struct xhci_command
, cmd_list
);
1225 if (xhci
->cmd_ring
->dequeue
!= command
->command_trb
)
1228 xhci_complete_cmd_in_cmd_wait_list(xhci
, command
,
1229 GET_COMP_CODE(le32_to_cpu(event
->status
)));
1234 * Finding the command trb need to be cancelled and modifying it to
1235 * NO OP command. And if the command is in device's command wait
1236 * list, finishing and freeing it.
1238 * If we can't find the command trb, we think it had already been
1241 static void xhci_cmd_to_noop(struct xhci_hcd
*xhci
, struct xhci_cd
*cur_cd
)
1243 struct xhci_segment
*cur_seg
;
1244 union xhci_trb
*cmd_trb
;
1247 if (xhci
->cmd_ring
->dequeue
== xhci
->cmd_ring
->enqueue
)
1250 /* find the current segment of command ring */
1251 cur_seg
= find_trb_seg(xhci
->cmd_ring
->first_seg
,
1252 xhci
->cmd_ring
->dequeue
, &cycle_state
);
1255 xhci_warn(xhci
, "Command ring mismatch, dequeue = %p %llx (dma)\n",
1256 xhci
->cmd_ring
->dequeue
,
1257 (unsigned long long)
1258 xhci_trb_virt_to_dma(xhci
->cmd_ring
->deq_seg
,
1259 xhci
->cmd_ring
->dequeue
));
1260 xhci_debug_ring(xhci
, xhci
->cmd_ring
);
1261 xhci_dbg_ring_ptrs(xhci
, xhci
->cmd_ring
);
1265 /* find the command trb matched by cd from command ring */
1266 for (cmd_trb
= xhci
->cmd_ring
->dequeue
;
1267 cmd_trb
!= xhci
->cmd_ring
->enqueue
;
1268 next_trb(xhci
, xhci
->cmd_ring
, &cur_seg
, &cmd_trb
)) {
1269 /* If the trb is link trb, continue */
1270 if (TRB_TYPE_LINK_LE32(cmd_trb
->generic
.field
[3]))
1273 if (cur_cd
->cmd_trb
== cmd_trb
) {
1275 /* If the command in device's command list, we should
1276 * finish it and free the command structure.
1278 if (cur_cd
->command
)
1279 xhci_complete_cmd_in_cmd_wait_list(xhci
,
1280 cur_cd
->command
, COMP_CMD_STOP
);
1282 /* get cycle state from the origin command trb */
1283 cycle_state
= le32_to_cpu(cmd_trb
->generic
.field
[3])
1286 /* modify the command trb to NO OP command */
1287 cmd_trb
->generic
.field
[0] = 0;
1288 cmd_trb
->generic
.field
[1] = 0;
1289 cmd_trb
->generic
.field
[2] = 0;
1290 cmd_trb
->generic
.field
[3] = cpu_to_le32(
1291 TRB_TYPE(TRB_CMD_NOOP
) | cycle_state
);
1297 static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd
*xhci
)
1299 struct xhci_cd
*cur_cd
, *next_cd
;
1301 if (list_empty(&xhci
->cancel_cmd_list
))
1304 list_for_each_entry_safe(cur_cd
, next_cd
,
1305 &xhci
->cancel_cmd_list
, cancel_cmd_list
) {
1306 xhci_cmd_to_noop(xhci
, cur_cd
);
1307 list_del(&cur_cd
->cancel_cmd_list
);
1313 * traversing the cancel_cmd_list. If the command descriptor according
1314 * to cmd_trb is found, the function free it and return 1, otherwise
1317 static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd
*xhci
,
1318 union xhci_trb
*cmd_trb
)
1320 struct xhci_cd
*cur_cd
, *next_cd
;
1322 if (list_empty(&xhci
->cancel_cmd_list
))
1325 list_for_each_entry_safe(cur_cd
, next_cd
,
1326 &xhci
->cancel_cmd_list
, cancel_cmd_list
) {
1327 if (cur_cd
->cmd_trb
== cmd_trb
) {
1328 if (cur_cd
->command
)
1329 xhci_complete_cmd_in_cmd_wait_list(xhci
,
1330 cur_cd
->command
, COMP_CMD_STOP
);
1331 list_del(&cur_cd
->cancel_cmd_list
);
1341 * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
1342 * trb pointed by the command ring dequeue pointer is the trb we want to
1343 * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
1344 * traverse the cancel_cmd_list to trun the all of the commands according
1345 * to command descriptor to NO-OP trb.
1347 static int handle_stopped_cmd_ring(struct xhci_hcd
*xhci
,
1348 int cmd_trb_comp_code
)
1350 int cur_trb_is_good
= 0;
1352 /* Searching the cmd trb pointed by the command ring dequeue
1353 * pointer in command descriptor list. If it is found, free it.
1355 cur_trb_is_good
= xhci_search_cmd_trb_in_cd_list(xhci
,
1356 xhci
->cmd_ring
->dequeue
);
1358 if (cmd_trb_comp_code
== COMP_CMD_ABORT
)
1359 xhci
->cmd_ring_state
= CMD_RING_STATE_STOPPED
;
1360 else if (cmd_trb_comp_code
== COMP_CMD_STOP
) {
1361 /* traversing the cancel_cmd_list and canceling
1362 * the command according to command descriptor
1364 xhci_cancel_cmd_in_cd_list(xhci
);
1366 xhci
->cmd_ring_state
= CMD_RING_STATE_RUNNING
;
1368 * ring command ring doorbell again to restart the
1371 if (xhci
->cmd_ring
->dequeue
!= xhci
->cmd_ring
->enqueue
)
1372 xhci_ring_cmd_db(xhci
);
1374 return cur_trb_is_good
;
1377 static void handle_cmd_completion(struct xhci_hcd
*xhci
,
1378 struct xhci_event_cmd
*event
)
1380 int slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
));
1382 dma_addr_t cmd_dequeue_dma
;
1383 struct xhci_input_control_ctx
*ctrl_ctx
;
1384 struct xhci_virt_device
*virt_dev
;
1385 unsigned int ep_index
;
1386 struct xhci_ring
*ep_ring
;
1387 unsigned int ep_state
;
1389 cmd_dma
= le64_to_cpu(event
->cmd_trb
);
1390 cmd_dequeue_dma
= xhci_trb_virt_to_dma(xhci
->cmd_ring
->deq_seg
,
1391 xhci
->cmd_ring
->dequeue
);
1392 /* Is the command ring deq ptr out of sync with the deq seg ptr? */
1393 if (cmd_dequeue_dma
== 0) {
1394 xhci
->error_bitmask
|= 1 << 4;
1397 /* Does the DMA address match our internal dequeue pointer address? */
1398 if (cmd_dma
!= (u64
) cmd_dequeue_dma
) {
1399 xhci
->error_bitmask
|= 1 << 5;
1403 if ((GET_COMP_CODE(le32_to_cpu(event
->status
)) == COMP_CMD_ABORT
) ||
1404 (GET_COMP_CODE(le32_to_cpu(event
->status
)) == COMP_CMD_STOP
)) {
1405 /* If the return value is 0, we think the trb pointed by
1406 * command ring dequeue pointer is a good trb. The good
1407 * trb means we don't want to cancel the trb, but it have
1408 * been stopped by host. So we should handle it normally.
1409 * Otherwise, driver should invoke inc_deq() and return.
1411 if (handle_stopped_cmd_ring(xhci
,
1412 GET_COMP_CODE(le32_to_cpu(event
->status
)))) {
1413 inc_deq(xhci
, xhci
->cmd_ring
);
1416 /* There is no command to handle if we get a stop event when the
1417 * command ring is empty, event->cmd_trb points to the next
1420 if (xhci
->cmd_ring
->dequeue
== xhci
->cmd_ring
->enqueue
)
1424 switch (le32_to_cpu(xhci
->cmd_ring
->dequeue
->generic
.field
[3])
1425 & TRB_TYPE_BITMASK
) {
1426 case TRB_TYPE(TRB_ENABLE_SLOT
):
1427 if (GET_COMP_CODE(le32_to_cpu(event
->status
)) == COMP_SUCCESS
)
1428 xhci
->slot_id
= slot_id
;
1431 complete(&xhci
->addr_dev
);
1433 case TRB_TYPE(TRB_DISABLE_SLOT
):
1434 if (xhci
->devs
[slot_id
]) {
1435 if (xhci
->quirks
& XHCI_EP_LIMIT_QUIRK
)
1436 /* Delete default control endpoint resources */
1437 xhci_free_device_endpoint_resources(xhci
,
1438 xhci
->devs
[slot_id
], true);
1439 xhci_free_virt_device(xhci
, slot_id
);
1442 case TRB_TYPE(TRB_CONFIG_EP
):
1443 virt_dev
= xhci
->devs
[slot_id
];
1444 if (handle_cmd_in_cmd_wait_list(xhci
, virt_dev
, event
))
1447 * Configure endpoint commands can come from the USB core
1448 * configuration or alt setting changes, or because the HW
1449 * needed an extra configure endpoint command after a reset
1450 * endpoint command or streams were being configured.
1451 * If the command was for a halted endpoint, the xHCI driver
1452 * is not waiting on the configure endpoint command.
1454 ctrl_ctx
= xhci_get_input_control_ctx(xhci
,
1456 /* Input ctx add_flags are the endpoint index plus one */
1457 ep_index
= xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx
->add_flags
)) - 1;
1458 /* A usb_set_interface() call directly after clearing a halted
1459 * condition may race on this quirky hardware. Not worth
1460 * worrying about, since this is prototype hardware. Not sure
1461 * if this will work for streams, but streams support was
1462 * untested on this prototype.
1464 if (xhci
->quirks
& XHCI_RESET_EP_QUIRK
&&
1465 ep_index
!= (unsigned int) -1 &&
1466 le32_to_cpu(ctrl_ctx
->add_flags
) - SLOT_FLAG
==
1467 le32_to_cpu(ctrl_ctx
->drop_flags
)) {
1468 ep_ring
= xhci
->devs
[slot_id
]->eps
[ep_index
].ring
;
1469 ep_state
= xhci
->devs
[slot_id
]->eps
[ep_index
].ep_state
;
1470 if (!(ep_state
& EP_HALTED
))
1471 goto bandwidth_change
;
1472 xhci_dbg(xhci
, "Completed config ep cmd - "
1473 "last ep index = %d, state = %d\n",
1474 ep_index
, ep_state
);
1475 /* Clear internal halted state and restart ring(s) */
1476 xhci
->devs
[slot_id
]->eps
[ep_index
].ep_state
&=
1478 ring_doorbell_for_active_rings(xhci
, slot_id
, ep_index
);
1482 xhci_dbg(xhci
, "Completed config ep cmd\n");
1483 xhci
->devs
[slot_id
]->cmd_status
=
1484 GET_COMP_CODE(le32_to_cpu(event
->status
));
1485 complete(&xhci
->devs
[slot_id
]->cmd_completion
);
1487 case TRB_TYPE(TRB_EVAL_CONTEXT
):
1488 virt_dev
= xhci
->devs
[slot_id
];
1489 if (handle_cmd_in_cmd_wait_list(xhci
, virt_dev
, event
))
1491 xhci
->devs
[slot_id
]->cmd_status
= GET_COMP_CODE(le32_to_cpu(event
->status
));
1492 complete(&xhci
->devs
[slot_id
]->cmd_completion
);
1494 case TRB_TYPE(TRB_ADDR_DEV
):
1495 xhci
->devs
[slot_id
]->cmd_status
= GET_COMP_CODE(le32_to_cpu(event
->status
));
1496 complete(&xhci
->addr_dev
);
1498 case TRB_TYPE(TRB_STOP_RING
):
1499 handle_stopped_endpoint(xhci
, xhci
->cmd_ring
->dequeue
, event
);
1501 case TRB_TYPE(TRB_SET_DEQ
):
1502 handle_set_deq_completion(xhci
, event
, xhci
->cmd_ring
->dequeue
);
1504 case TRB_TYPE(TRB_CMD_NOOP
):
1506 case TRB_TYPE(TRB_RESET_EP
):
1507 handle_reset_ep_completion(xhci
, event
, xhci
->cmd_ring
->dequeue
);
1509 case TRB_TYPE(TRB_RESET_DEV
):
1510 xhci_dbg(xhci
, "Completed reset device command.\n");
1511 slot_id
= TRB_TO_SLOT_ID(
1512 le32_to_cpu(xhci
->cmd_ring
->dequeue
->generic
.field
[3]));
1513 virt_dev
= xhci
->devs
[slot_id
];
1515 handle_cmd_in_cmd_wait_list(xhci
, virt_dev
, event
);
1517 xhci_warn(xhci
, "Reset device command completion "
1518 "for disabled slot %u\n", slot_id
);
1520 case TRB_TYPE(TRB_NEC_GET_FW
):
1521 if (!(xhci
->quirks
& XHCI_NEC_HOST
)) {
1522 xhci
->error_bitmask
|= 1 << 6;
1525 xhci_dbg(xhci
, "NEC firmware version %2x.%02x\n",
1526 NEC_FW_MAJOR(le32_to_cpu(event
->status
)),
1527 NEC_FW_MINOR(le32_to_cpu(event
->status
)));
1530 /* Skip over unknown commands on the event ring */
1531 xhci
->error_bitmask
|= 1 << 6;
1534 inc_deq(xhci
, xhci
->cmd_ring
);
1537 static void handle_vendor_event(struct xhci_hcd
*xhci
,
1538 union xhci_trb
*event
)
1542 trb_type
= TRB_FIELD_TO_TYPE(le32_to_cpu(event
->generic
.field
[3]));
1543 xhci_dbg(xhci
, "Vendor specific event TRB type = %u\n", trb_type
);
1544 if (trb_type
== TRB_NEC_CMD_COMP
&& (xhci
->quirks
& XHCI_NEC_HOST
))
1545 handle_cmd_completion(xhci
, &event
->event_cmd
);
1548 /* @port_id: the one-based port ID from the hardware (indexed from array of all
1549 * port registers -- USB 3.0 and USB 2.0).
1551 * Returns a zero-based port number, which is suitable for indexing into each of
1552 * the split roothubs' port arrays and bus state arrays.
1553 * Add one to it in order to call xhci_find_slot_id_by_port.
1555 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd
*hcd
,
1556 struct xhci_hcd
*xhci
, u32 port_id
)
1559 unsigned int num_similar_speed_ports
= 0;
1561 /* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
1562 * and usb2_ports are 0-based indexes. Count the number of similar
1563 * speed ports, up to 1 port before this port.
1565 for (i
= 0; i
< (port_id
- 1); i
++) {
1566 u8 port_speed
= xhci
->port_array
[i
];
1569 * Skip ports that don't have known speeds, or have duplicate
1570 * Extended Capabilities port speed entries.
1572 if (port_speed
== 0 || port_speed
== DUPLICATE_ENTRY
)
1576 * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
1577 * 1.1 ports are under the USB 2.0 hub. If the port speed
1578 * matches the device speed, it's a similar speed port.
1580 if ((port_speed
== 0x03) == (hcd
->speed
== HCD_USB3
))
1581 num_similar_speed_ports
++;
1583 return num_similar_speed_ports
;
1586 static void handle_device_notification(struct xhci_hcd
*xhci
,
1587 union xhci_trb
*event
)
1590 struct usb_device
*udev
;
1592 slot_id
= TRB_TO_SLOT_ID(event
->generic
.field
[3]);
1593 if (!xhci
->devs
[slot_id
]) {
1594 xhci_warn(xhci
, "Device Notification event for "
1595 "unused slot %u\n", slot_id
);
1599 xhci_dbg(xhci
, "Device Wake Notification event for slot ID %u\n",
1601 udev
= xhci
->devs
[slot_id
]->udev
;
1602 if (udev
&& udev
->parent
)
1603 usb_wakeup_notification(udev
->parent
, udev
->portnum
);
1606 static void handle_port_status(struct xhci_hcd
*xhci
,
1607 union xhci_trb
*event
)
1609 struct usb_hcd
*hcd
;
1614 unsigned int faked_port_index
;
1616 struct xhci_bus_state
*bus_state
;
1617 __le32 __iomem
**port_array
;
1618 bool bogus_port_status
= false;
1620 /* Port status change events always have a successful completion code */
1621 if (GET_COMP_CODE(le32_to_cpu(event
->generic
.field
[2])) != COMP_SUCCESS
) {
1622 xhci_warn(xhci
, "WARN: xHC returned failed port status event\n");
1623 xhci
->error_bitmask
|= 1 << 8;
1625 port_id
= GET_PORT_ID(le32_to_cpu(event
->generic
.field
[0]));
1626 xhci_dbg(xhci
, "Port Status Change Event for port %d\n", port_id
);
1628 max_ports
= HCS_MAX_PORTS(xhci
->hcs_params1
);
1629 if ((port_id
<= 0) || (port_id
> max_ports
)) {
1630 xhci_warn(xhci
, "Invalid port id %d\n", port_id
);
1631 inc_deq(xhci
, xhci
->event_ring
);
1635 /* Figure out which usb_hcd this port is attached to:
1636 * is it a USB 3.0 port or a USB 2.0/1.1 port?
1638 major_revision
= xhci
->port_array
[port_id
- 1];
1640 /* Find the right roothub. */
1641 hcd
= xhci_to_hcd(xhci
);
1642 if ((major_revision
== 0x03) != (hcd
->speed
== HCD_USB3
))
1643 hcd
= xhci
->shared_hcd
;
1645 if (major_revision
== 0) {
1646 xhci_warn(xhci
, "Event for port %u not in "
1647 "Extended Capabilities, ignoring.\n",
1649 bogus_port_status
= true;
1652 if (major_revision
== DUPLICATE_ENTRY
) {
1653 xhci_warn(xhci
, "Event for port %u duplicated in"
1654 "Extended Capabilities, ignoring.\n",
1656 bogus_port_status
= true;
1661 * Hardware port IDs reported by a Port Status Change Event include USB
1662 * 3.0 and USB 2.0 ports. We want to check if the port has reported a
1663 * resume event, but we first need to translate the hardware port ID
1664 * into the index into the ports on the correct split roothub, and the
1665 * correct bus_state structure.
1667 bus_state
= &xhci
->bus_state
[hcd_index(hcd
)];
1668 if (hcd
->speed
== HCD_USB3
)
1669 port_array
= xhci
->usb3_ports
;
1671 port_array
= xhci
->usb2_ports
;
1672 /* Find the faked port hub number */
1673 faked_port_index
= find_faked_portnum_from_hw_portnum(hcd
, xhci
,
1676 temp
= xhci_readl(xhci
, port_array
[faked_port_index
]);
1677 if (hcd
->state
== HC_STATE_SUSPENDED
) {
1678 xhci_dbg(xhci
, "resume root hub\n");
1679 usb_hcd_resume_root_hub(hcd
);
1682 if ((temp
& PORT_PLC
) && (temp
& PORT_PLS_MASK
) == XDEV_RESUME
) {
1683 xhci_dbg(xhci
, "port resume event for port %d\n", port_id
);
1685 temp1
= xhci_readl(xhci
, &xhci
->op_regs
->command
);
1686 if (!(temp1
& CMD_RUN
)) {
1687 xhci_warn(xhci
, "xHC is not running.\n");
1691 if (DEV_SUPERSPEED(temp
)) {
1692 xhci_dbg(xhci
, "remote wake SS port %d\n", port_id
);
1693 /* Set a flag to say the port signaled remote wakeup,
1694 * so we can tell the difference between the end of
1695 * device and host initiated resume.
1697 bus_state
->port_remote_wakeup
|= 1 << faked_port_index
;
1698 xhci_test_and_clear_bit(xhci
, port_array
,
1699 faked_port_index
, PORT_PLC
);
1700 xhci_set_link_state(xhci
, port_array
, faked_port_index
,
1702 /* Need to wait until the next link state change
1703 * indicates the device is actually in U0.
1705 bogus_port_status
= true;
1708 xhci_dbg(xhci
, "resume HS port %d\n", port_id
);
1709 bus_state
->resume_done
[faked_port_index
] = jiffies
+
1710 msecs_to_jiffies(20);
1711 set_bit(faked_port_index
, &bus_state
->resuming_ports
);
1712 mod_timer(&hcd
->rh_timer
,
1713 bus_state
->resume_done
[faked_port_index
]);
1714 /* Do the rest in GetPortStatus */
1718 if ((temp
& PORT_PLC
) && (temp
& PORT_PLS_MASK
) == XDEV_U0
&&
1719 DEV_SUPERSPEED(temp
)) {
1720 xhci_dbg(xhci
, "resume SS port %d finished\n", port_id
);
1721 /* We've just brought the device into U0 through either the
1722 * Resume state after a device remote wakeup, or through the
1723 * U3Exit state after a host-initiated resume. If it's a device
1724 * initiated remote wake, don't pass up the link state change,
1725 * so the roothub behavior is consistent with external
1726 * USB 3.0 hub behavior.
1728 slot_id
= xhci_find_slot_id_by_port(hcd
, xhci
,
1729 faked_port_index
+ 1);
1730 if (slot_id
&& xhci
->devs
[slot_id
])
1731 xhci_ring_device(xhci
, slot_id
);
1732 if (bus_state
->port_remote_wakeup
& (1 << faked_port_index
)) {
1733 bus_state
->port_remote_wakeup
&=
1734 ~(1 << faked_port_index
);
1735 xhci_test_and_clear_bit(xhci
, port_array
,
1736 faked_port_index
, PORT_PLC
);
1737 usb_wakeup_notification(hcd
->self
.root_hub
,
1738 faked_port_index
+ 1);
1739 bogus_port_status
= true;
1744 if (hcd
->speed
!= HCD_USB3
)
1745 xhci_test_and_clear_bit(xhci
, port_array
, faked_port_index
,
1749 /* Update event ring dequeue pointer before dropping the lock */
1750 inc_deq(xhci
, xhci
->event_ring
);
1752 /* Don't make the USB core poll the roothub if we got a bad port status
1753 * change event. Besides, at that point we can't tell which roothub
1754 * (USB 2.0 or USB 3.0) to kick.
1756 if (bogus_port_status
)
1760 * xHCI port-status-change events occur when the "or" of all the
1761 * status-change bits in the portsc register changes from 0 to 1.
1762 * New status changes won't cause an event if any other change
1763 * bits are still set. When an event occurs, switch over to
1764 * polling to avoid losing status changes.
1766 xhci_dbg(xhci
, "%s: starting port polling.\n", __func__
);
1767 set_bit(HCD_FLAG_POLL_RH
, &hcd
->flags
);
1768 spin_unlock(&xhci
->lock
);
1769 /* Pass this up to the core */
1770 usb_hcd_poll_rh_status(hcd
);
1771 spin_lock(&xhci
->lock
);
1775 * This TD is defined by the TRBs starting at start_trb in start_seg and ending
1776 * at end_trb, which may be in another segment. If the suspect DMA address is a
1777 * TRB in this TD, this function returns that TRB's segment. Otherwise it
1780 struct xhci_segment
*trb_in_td(struct xhci_segment
*start_seg
,
1781 union xhci_trb
*start_trb
,
1782 union xhci_trb
*end_trb
,
1783 dma_addr_t suspect_dma
)
1785 dma_addr_t start_dma
;
1786 dma_addr_t end_seg_dma
;
1787 dma_addr_t end_trb_dma
;
1788 struct xhci_segment
*cur_seg
;
1790 start_dma
= xhci_trb_virt_to_dma(start_seg
, start_trb
);
1791 cur_seg
= start_seg
;
1796 /* We may get an event for a Link TRB in the middle of a TD */
1797 end_seg_dma
= xhci_trb_virt_to_dma(cur_seg
,
1798 &cur_seg
->trbs
[TRBS_PER_SEGMENT
- 1]);
1799 /* If the end TRB isn't in this segment, this is set to 0 */
1800 end_trb_dma
= xhci_trb_virt_to_dma(cur_seg
, end_trb
);
1802 if (end_trb_dma
> 0) {
1803 /* The end TRB is in this segment, so suspect should be here */
1804 if (start_dma
<= end_trb_dma
) {
1805 if (suspect_dma
>= start_dma
&& suspect_dma
<= end_trb_dma
)
1808 /* Case for one segment with
1809 * a TD wrapped around to the top
1811 if ((suspect_dma
>= start_dma
&&
1812 suspect_dma
<= end_seg_dma
) ||
1813 (suspect_dma
>= cur_seg
->dma
&&
1814 suspect_dma
<= end_trb_dma
))
1819 /* Might still be somewhere in this segment */
1820 if (suspect_dma
>= start_dma
&& suspect_dma
<= end_seg_dma
)
1823 cur_seg
= cur_seg
->next
;
1824 start_dma
= xhci_trb_virt_to_dma(cur_seg
, &cur_seg
->trbs
[0]);
1825 } while (cur_seg
!= start_seg
);
1830 static void xhci_cleanup_halted_endpoint(struct xhci_hcd
*xhci
,
1831 unsigned int slot_id
, unsigned int ep_index
,
1832 unsigned int stream_id
,
1833 struct xhci_td
*td
, union xhci_trb
*event_trb
)
1835 struct xhci_virt_ep
*ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
1836 ep
->ep_state
|= EP_HALTED
;
1837 ep
->stopped_td
= td
;
1838 ep
->stopped_trb
= event_trb
;
1839 ep
->stopped_stream
= stream_id
;
1841 xhci_queue_reset_ep(xhci
, slot_id
, ep_index
);
1842 xhci_cleanup_stalled_ring(xhci
, td
->urb
->dev
, ep_index
);
1844 ep
->stopped_td
= NULL
;
1845 ep
->stopped_trb
= NULL
;
1846 ep
->stopped_stream
= 0;
1848 xhci_ring_cmd_db(xhci
);
1851 /* Check if an error has halted the endpoint ring. The class driver will
1852 * cleanup the halt for a non-default control endpoint if we indicate a stall.
1853 * However, a babble and other errors also halt the endpoint ring, and the class
1854 * driver won't clear the halt in that case, so we need to issue a Set Transfer
1855 * Ring Dequeue Pointer command manually.
1857 static int xhci_requires_manual_halt_cleanup(struct xhci_hcd
*xhci
,
1858 struct xhci_ep_ctx
*ep_ctx
,
1859 unsigned int trb_comp_code
)
1861 /* TRB completion codes that may require a manual halt cleanup */
1862 if (trb_comp_code
== COMP_TX_ERR
||
1863 trb_comp_code
== COMP_BABBLE
||
1864 trb_comp_code
== COMP_SPLIT_ERR
)
1865 /* The 0.96 spec says a babbling control endpoint
1866 * is not halted. The 0.96 spec says it is. Some HW
1867 * claims to be 0.95 compliant, but it halts the control
1868 * endpoint anyway. Check if a babble halted the
1871 if ((ep_ctx
->ep_info
& cpu_to_le32(EP_STATE_MASK
)) ==
1872 cpu_to_le32(EP_STATE_HALTED
))
1878 int xhci_is_vendor_info_code(struct xhci_hcd
*xhci
, unsigned int trb_comp_code
)
1880 if (trb_comp_code
>= 224 && trb_comp_code
<= 255) {
1881 /* Vendor defined "informational" completion code,
1882 * treat as not-an-error.
1884 xhci_dbg(xhci
, "Vendor defined info completion code %u\n",
1886 xhci_dbg(xhci
, "Treating code as success.\n");
1893 * Finish the td processing, remove the td from td list;
1894 * Return 1 if the urb can be given back.
1896 static int finish_td(struct xhci_hcd
*xhci
, struct xhci_td
*td
,
1897 union xhci_trb
*event_trb
, struct xhci_transfer_event
*event
,
1898 struct xhci_virt_ep
*ep
, int *status
, bool skip
)
1900 struct xhci_virt_device
*xdev
;
1901 struct xhci_ring
*ep_ring
;
1902 unsigned int slot_id
;
1904 struct urb
*urb
= NULL
;
1905 struct xhci_ep_ctx
*ep_ctx
;
1907 struct urb_priv
*urb_priv
;
1910 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
));
1911 xdev
= xhci
->devs
[slot_id
];
1912 ep_index
= TRB_TO_EP_ID(le32_to_cpu(event
->flags
)) - 1;
1913 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
1914 ep_ctx
= xhci_get_ep_ctx(xhci
, xdev
->out_ctx
, ep_index
);
1915 trb_comp_code
= GET_COMP_CODE(le32_to_cpu(event
->transfer_len
));
1920 if (trb_comp_code
== COMP_STOP_INVAL
||
1921 trb_comp_code
== COMP_STOP
) {
1922 /* The Endpoint Stop Command completion will take care of any
1923 * stopped TDs. A stopped TD may be restarted, so don't update
1924 * the ring dequeue pointer or take this TD off any lists yet.
1926 ep
->stopped_td
= td
;
1927 ep
->stopped_trb
= event_trb
;
1930 if (trb_comp_code
== COMP_STALL
) {
1931 /* The transfer is completed from the driver's
1932 * perspective, but we need to issue a set dequeue
1933 * command for this stalled endpoint to move the dequeue
1934 * pointer past the TD. We can't do that here because
1935 * the halt condition must be cleared first. Let the
1936 * USB class driver clear the stall later.
1938 ep
->stopped_td
= td
;
1939 ep
->stopped_trb
= event_trb
;
1940 ep
->stopped_stream
= ep_ring
->stream_id
;
1941 } else if (xhci_requires_manual_halt_cleanup(xhci
,
1942 ep_ctx
, trb_comp_code
)) {
1943 /* Other types of errors halt the endpoint, but the
1944 * class driver doesn't call usb_reset_endpoint() unless
1945 * the error is -EPIPE. Clear the halted status in the
1946 * xHCI hardware manually.
1948 xhci_cleanup_halted_endpoint(xhci
,
1949 slot_id
, ep_index
, ep_ring
->stream_id
,
1952 /* Update ring dequeue pointer */
1953 while (ep_ring
->dequeue
!= td
->last_trb
)
1954 inc_deq(xhci
, ep_ring
);
1955 inc_deq(xhci
, ep_ring
);
1959 /* Clean up the endpoint's TD list */
1961 urb_priv
= urb
->hcpriv
;
1963 /* Do one last check of the actual transfer length.
1964 * If the host controller said we transferred more data than
1965 * the buffer length, urb->actual_length will be a very big
1966 * number (since it's unsigned). Play it safe and say we didn't
1967 * transfer anything.
1969 if (urb
->actual_length
> urb
->transfer_buffer_length
) {
1970 xhci_warn(xhci
, "URB transfer length is wrong, "
1971 "xHC issue? req. len = %u, "
1973 urb
->transfer_buffer_length
,
1974 urb
->actual_length
);
1975 urb
->actual_length
= 0;
1976 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
1977 *status
= -EREMOTEIO
;
1981 list_del_init(&td
->td_list
);
1982 /* Was this TD slated to be cancelled but completed anyway? */
1983 if (!list_empty(&td
->cancelled_td_list
))
1984 list_del_init(&td
->cancelled_td_list
);
1987 /* Giveback the urb when all the tds are completed */
1988 if (urb_priv
->td_cnt
== urb_priv
->length
) {
1990 if (usb_pipetype(urb
->pipe
) == PIPE_ISOCHRONOUS
) {
1991 xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
--;
1992 #ifndef CONFIG_MTK_XHCI
1993 if (xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
1995 if (xhci
->quirks
& XHCI_AMD_PLL_FIX
)
1996 usb_amd_quirk_pll_enable();
2007 * Process control tds, update urb status and actual_length.
2009 static int process_ctrl_td(struct xhci_hcd
*xhci
, struct xhci_td
*td
,
2010 union xhci_trb
*event_trb
, struct xhci_transfer_event
*event
,
2011 struct xhci_virt_ep
*ep
, int *status
)
2013 struct xhci_virt_device
*xdev
;
2014 struct xhci_ring
*ep_ring
;
2015 unsigned int slot_id
;
2017 struct xhci_ep_ctx
*ep_ctx
;
2020 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
));
2021 xdev
= xhci
->devs
[slot_id
];
2022 ep_index
= TRB_TO_EP_ID(le32_to_cpu(event
->flags
)) - 1;
2023 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
2024 ep_ctx
= xhci_get_ep_ctx(xhci
, xdev
->out_ctx
, ep_index
);
2025 trb_comp_code
= GET_COMP_CODE(le32_to_cpu(event
->transfer_len
));
2027 switch (trb_comp_code
) {
2029 if (event_trb
== ep_ring
->dequeue
) {
2030 xhci_warn(xhci
, "WARN: Success on ctrl setup TRB "
2031 "without IOC set??\n");
2032 *status
= -ESHUTDOWN
;
2033 } else if (event_trb
!= td
->last_trb
) {
2034 xhci_warn(xhci
, "WARN: Success on ctrl data TRB "
2035 "without IOC set??\n");
2036 *status
= -ESHUTDOWN
;
2042 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
2043 *status
= -EREMOTEIO
;
2047 case COMP_STOP_INVAL
:
2049 return finish_td(xhci
, td
, event_trb
, event
, ep
, status
, false);
2051 if (!xhci_requires_manual_halt_cleanup(xhci
,
2052 ep_ctx
, trb_comp_code
))
2054 xhci_dbg(xhci
, "TRB error code %u, "
2055 "halted endpoint index = %u\n",
2056 trb_comp_code
, ep_index
);
2057 /* else fall through */
2059 /* Did we transfer part of the data (middle) phase? */
2060 if (event_trb
!= ep_ring
->dequeue
&&
2061 event_trb
!= td
->last_trb
)
2062 td
->urb
->actual_length
=
2063 td
->urb
->transfer_buffer_length
-
2064 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
));
2066 td
->urb
->actual_length
= 0;
2068 xhci_cleanup_halted_endpoint(xhci
,
2069 slot_id
, ep_index
, 0, td
, event_trb
);
2070 return finish_td(xhci
, td
, event_trb
, event
, ep
, status
, true);
2073 * Did we transfer any data, despite the errors that might have
2074 * happened? I.e. did we get past the setup stage?
2076 if (event_trb
!= ep_ring
->dequeue
) {
2077 /* The event was for the status stage */
2078 if (event_trb
== td
->last_trb
) {
2079 if (td
->urb
->actual_length
!= 0) {
2080 /* Don't overwrite a previously set error code
2082 if ((*status
== -EINPROGRESS
|| *status
== 0) &&
2083 (td
->urb
->transfer_flags
2084 & URB_SHORT_NOT_OK
))
2085 /* Did we already see a short data
2087 *status
= -EREMOTEIO
;
2089 td
->urb
->actual_length
=
2090 td
->urb
->transfer_buffer_length
;
2093 /* Maybe the event was for the data stage? */
2094 td
->urb
->actual_length
=
2095 td
->urb
->transfer_buffer_length
-
2096 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
));
2097 xhci_dbg(xhci
, "Waiting for status "
2103 return finish_td(xhci
, td
, event_trb
, event
, ep
, status
, false);
2107 * Process isochronous tds, update urb packet status and actual_length.
2109 static int process_isoc_td(struct xhci_hcd
*xhci
, struct xhci_td
*td
,
2110 union xhci_trb
*event_trb
, struct xhci_transfer_event
*event
,
2111 struct xhci_virt_ep
*ep
, int *status
)
2113 struct xhci_ring
*ep_ring
;
2114 struct urb_priv
*urb_priv
;
2117 union xhci_trb
*cur_trb
;
2118 struct xhci_segment
*cur_seg
;
2119 struct usb_iso_packet_descriptor
*frame
;
2121 bool skip_td
= false;
2123 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
2124 trb_comp_code
= GET_COMP_CODE(le32_to_cpu(event
->transfer_len
));
2125 urb_priv
= td
->urb
->hcpriv
;
2126 idx
= urb_priv
->td_cnt
;
2127 frame
= &td
->urb
->iso_frame_desc
[idx
];
2129 /* handle completion code */
2130 switch (trb_comp_code
) {
2132 if (EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)) == 0) {
2136 if ((xhci
->quirks
& XHCI_TRUST_TX_LENGTH
))
2137 trb_comp_code
= COMP_SHORT_TX
;
2139 frame
->status
= td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
?
2143 frame
->status
= -ECOMM
;
2146 case COMP_BUFF_OVER
:
2148 frame
->status
= -EOVERFLOW
;
2154 frame
->status
= -EPROTO
;
2158 case COMP_STOP_INVAL
:
2165 if (trb_comp_code
== COMP_SUCCESS
|| skip_td
) {
2166 frame
->actual_length
= frame
->length
;
2167 td
->urb
->actual_length
+= frame
->length
;
2169 for (cur_trb
= ep_ring
->dequeue
,
2170 cur_seg
= ep_ring
->deq_seg
; cur_trb
!= event_trb
;
2171 next_trb(xhci
, ep_ring
, &cur_seg
, &cur_trb
)) {
2172 if (!TRB_TYPE_NOOP_LE32(cur_trb
->generic
.field
[3]) &&
2173 !TRB_TYPE_LINK_LE32(cur_trb
->generic
.field
[3]))
2174 len
+= TRB_LEN(le32_to_cpu(cur_trb
->generic
.field
[2]));
2176 len
+= TRB_LEN(le32_to_cpu(cur_trb
->generic
.field
[2])) -
2177 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
));
2179 if (trb_comp_code
!= COMP_STOP_INVAL
) {
2180 frame
->actual_length
= len
;
2181 td
->urb
->actual_length
+= len
;
2185 return finish_td(xhci
, td
, event_trb
, event
, ep
, status
, false);
2188 static int skip_isoc_td(struct xhci_hcd
*xhci
, struct xhci_td
*td
,
2189 struct xhci_transfer_event
*event
,
2190 struct xhci_virt_ep
*ep
, int *status
)
2192 struct xhci_ring
*ep_ring
;
2193 struct urb_priv
*urb_priv
;
2194 struct usb_iso_packet_descriptor
*frame
;
2197 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
2198 urb_priv
= td
->urb
->hcpriv
;
2199 idx
= urb_priv
->td_cnt
;
2200 frame
= &td
->urb
->iso_frame_desc
[idx
];
2202 /* The transfer is partly done. */
2203 frame
->status
= -EXDEV
;
2205 /* calc actual length */
2206 frame
->actual_length
= 0;
2208 /* Update ring dequeue pointer */
2209 while (ep_ring
->dequeue
!= td
->last_trb
)
2210 inc_deq(xhci
, ep_ring
);
2211 inc_deq(xhci
, ep_ring
);
2213 return finish_td(xhci
, td
, NULL
, event
, ep
, status
, true);
2217 * Process bulk and interrupt tds, update urb status and actual_length.
2219 static int process_bulk_intr_td(struct xhci_hcd
*xhci
, struct xhci_td
*td
,
2220 union xhci_trb
*event_trb
, struct xhci_transfer_event
*event
,
2221 struct xhci_virt_ep
*ep
, int *status
)
2223 struct xhci_ring
*ep_ring
;
2224 union xhci_trb
*cur_trb
;
2225 struct xhci_segment
*cur_seg
;
2228 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
2229 trb_comp_code
= GET_COMP_CODE(le32_to_cpu(event
->transfer_len
));
2231 switch (trb_comp_code
) {
2233 /* Double check that the HW transferred everything. */
2234 if (event_trb
!= td
->last_trb
||
2235 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)) != 0) {
2236 xhci_warn(xhci
, "WARN Successful completion "
2238 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
2239 *status
= -EREMOTEIO
;
2242 if ((xhci
->quirks
& XHCI_TRUST_TX_LENGTH
))
2243 trb_comp_code
= COMP_SHORT_TX
;
2249 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
2250 *status
= -EREMOTEIO
;
2255 /* Others already handled above */
2258 if (trb_comp_code
== COMP_SHORT_TX
)
2259 xhci_dbg(xhci
, "ep %#x - asked for %d bytes, "
2260 "%d bytes untransferred\n",
2261 td
->urb
->ep
->desc
.bEndpointAddress
,
2262 td
->urb
->transfer_buffer_length
,
2263 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)));
2264 /* Fast path - was this the last TRB in the TD for this URB? */
2265 if (event_trb
== td
->last_trb
) {
2266 if (EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)) != 0) {
2267 td
->urb
->actual_length
=
2268 td
->urb
->transfer_buffer_length
-
2269 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
));
2270 if (td
->urb
->transfer_buffer_length
<
2271 td
->urb
->actual_length
) {
2272 xhci_warn(xhci
, "HC gave bad length "
2273 "of %d bytes left\n",
2274 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)));
2275 td
->urb
->actual_length
= 0;
2276 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
2277 *status
= -EREMOTEIO
;
2281 /* Don't overwrite a previously set error code */
2282 if (*status
== -EINPROGRESS
) {
2283 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
2284 *status
= -EREMOTEIO
;
2289 td
->urb
->actual_length
=
2290 td
->urb
->transfer_buffer_length
;
2291 /* Ignore a short packet completion if the
2292 * untransferred length was zero.
2294 if (*status
== -EREMOTEIO
)
2298 /* Slow path - walk the list, starting from the dequeue
2299 * pointer, to get the actual length transferred.
2301 td
->urb
->actual_length
= 0;
2302 for (cur_trb
= ep_ring
->dequeue
, cur_seg
= ep_ring
->deq_seg
;
2303 cur_trb
!= event_trb
;
2304 next_trb(xhci
, ep_ring
, &cur_seg
, &cur_trb
)) {
2305 if (!TRB_TYPE_NOOP_LE32(cur_trb
->generic
.field
[3]) &&
2306 !TRB_TYPE_LINK_LE32(cur_trb
->generic
.field
[3]))
2307 td
->urb
->actual_length
+=
2308 TRB_LEN(le32_to_cpu(cur_trb
->generic
.field
[2]));
2310 /* If the ring didn't stop on a Link or No-op TRB, add
2311 * in the actual bytes transferred from the Normal TRB
2313 if (trb_comp_code
!= COMP_STOP_INVAL
)
2314 td
->urb
->actual_length
+=
2315 TRB_LEN(le32_to_cpu(cur_trb
->generic
.field
[2])) -
2316 EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
));
2319 return finish_td(xhci
, td
, event_trb
, event
, ep
, status
, false);
2323 * If this function returns an error condition, it means it got a Transfer
2324 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
2325 * At this point, the host controller is probably hosed and should be reset.
2327 static int handle_tx_event(struct xhci_hcd
*xhci
,
2328 struct xhci_transfer_event
*event
)
2329 __releases(&xhci
->lock
)
2330 __acquires(&xhci
->lock
)
2332 struct xhci_virt_device
*xdev
;
2333 struct xhci_virt_ep
*ep
;
2334 struct xhci_ring
*ep_ring
;
2335 unsigned int slot_id
;
2337 struct xhci_td
*td
= NULL
;
2338 dma_addr_t event_dma
;
2339 struct xhci_segment
*event_seg
;
2340 union xhci_trb
*event_trb
;
2341 struct urb
*urb
= NULL
;
2342 int status
= -EINPROGRESS
;
2343 struct urb_priv
*urb_priv
;
2344 struct xhci_ep_ctx
*ep_ctx
;
2345 struct list_head
*tmp
;
2350 slot_id
= TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
));
2351 xdev
= xhci
->devs
[slot_id
];
2353 xhci_err(xhci
, "ERROR Transfer event pointed to bad slot\n");
2354 xhci_err(xhci
, "@%016llx %08x %08x %08x %08x\n",
2355 (unsigned long long) xhci_trb_virt_to_dma(
2356 xhci
->event_ring
->deq_seg
,
2357 xhci
->event_ring
->dequeue
),
2358 lower_32_bits(le64_to_cpu(event
->buffer
)),
2359 upper_32_bits(le64_to_cpu(event
->buffer
)),
2360 le32_to_cpu(event
->transfer_len
),
2361 le32_to_cpu(event
->flags
));
2362 xhci_dbg(xhci
, "Event ring:\n");
2363 xhci_debug_segment(xhci
, xhci
->event_ring
->deq_seg
);
2367 /* Endpoint ID is 1 based, our index is zero based */
2368 ep_index
= TRB_TO_EP_ID(le32_to_cpu(event
->flags
)) - 1;
2369 ep
= &xdev
->eps
[ep_index
];
2370 ep_ring
= xhci_dma_to_transfer_ring(ep
, le64_to_cpu(event
->buffer
));
2371 ep_ctx
= xhci_get_ep_ctx(xhci
, xdev
->out_ctx
, ep_index
);
2373 (le32_to_cpu(ep_ctx
->ep_info
) & EP_STATE_MASK
) ==
2374 EP_STATE_DISABLED
) {
2375 xhci_err(xhci
, "ERROR Transfer event for disabled endpoint "
2376 "or incorrect stream ring\n");
2377 xhci_err(xhci
, "@%016llx %08x %08x %08x %08x\n",
2378 (unsigned long long) xhci_trb_virt_to_dma(
2379 xhci
->event_ring
->deq_seg
,
2380 xhci
->event_ring
->dequeue
),
2381 lower_32_bits(le64_to_cpu(event
->buffer
)),
2382 upper_32_bits(le64_to_cpu(event
->buffer
)),
2383 le32_to_cpu(event
->transfer_len
),
2384 le32_to_cpu(event
->flags
));
2385 xhci_dbg(xhci
, "Event ring:\n");
2386 xhci_debug_segment(xhci
, xhci
->event_ring
->deq_seg
);
2390 /* Count current td numbers if ep->skip is set */
2392 list_for_each(tmp
, &ep_ring
->td_list
)
2396 event_dma
= le64_to_cpu(event
->buffer
);
2397 trb_comp_code
= GET_COMP_CODE(le32_to_cpu(event
->transfer_len
));
2398 /* Look for common error cases */
2399 switch (trb_comp_code
) {
2400 /* Skip codes that require special handling depending on
2404 if (EVENT_TRB_LEN(le32_to_cpu(event
->transfer_len
)) == 0)
2406 if (xhci
->quirks
& XHCI_TRUST_TX_LENGTH
)
2407 trb_comp_code
= COMP_SHORT_TX
;
2409 xhci_warn_ratelimited(xhci
,
2410 "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n");
2414 xhci_dbg(xhci
, "Stopped on Transfer TRB\n");
2416 case COMP_STOP_INVAL
:
2417 xhci_dbg(xhci
, "Stopped on No-op or Link TRB\n");
2420 xhci_dbg(xhci
, "Stalled endpoint\n");
2421 ep
->ep_state
|= EP_HALTED
;
2425 xhci_warn(xhci
, "WARN: TRB error on endpoint\n");
2428 case COMP_SPLIT_ERR
:
2430 xhci_dbg(xhci
, "Transfer error on endpoint\n");
2434 xhci_dbg(xhci
, "Babble error on endpoint\n");
2435 status
= -EOVERFLOW
;
2438 xhci_warn(xhci
, "WARN: HC couldn't access mem fast enough\n");
2442 xhci_warn(xhci
, "WARN: bandwidth overrun event on endpoint\n");
2444 case COMP_BUFF_OVER
:
2445 xhci_warn(xhci
, "WARN: buffer overrun event on endpoint\n");
2449 * When the Isoch ring is empty, the xHC will generate
2450 * a Ring Overrun Event for IN Isoch endpoint or Ring
2451 * Underrun Event for OUT Isoch endpoint.
2453 xhci_dbg(xhci
, "underrun event on endpoint\n");
2454 if (!list_empty(&ep_ring
->td_list
))
2455 xhci_dbg(xhci
, "Underrun Event for slot %d ep %d "
2456 "still with TDs queued?\n",
2457 TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
)),
2461 xhci_dbg(xhci
, "overrun event on endpoint\n");
2462 if (!list_empty(&ep_ring
->td_list
))
2463 xhci_dbg(xhci
, "Overrun Event for slot %d ep %d "
2464 "still with TDs queued?\n",
2465 TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
)),
2469 xhci_warn(xhci
, "WARN: detect an incompatible device");
2472 case COMP_MISSED_INT
:
2474 * When encounter missed service error, one or more isoc tds
2475 * may be missed by xHC.
2476 * Set skip flag of the ep_ring; Complete the missed tds as
2477 * short transfer when process the ep_ring next time.
2480 xhci_dbg(xhci
, "Miss service interval error, set skip flag\n");
2483 if (xhci_is_vendor_info_code(xhci
, trb_comp_code
)) {
2487 xhci_warn(xhci
, "ERROR Unknown event condition, HC probably "
2493 /* This TRB should be in the TD at the head of this ring's
2496 if (list_empty(&ep_ring
->td_list
)) {
2498 * A stopped endpoint may generate an extra completion
2499 * event if the device was suspended. Don't print
2502 if (!(trb_comp_code
== COMP_STOP
||
2503 trb_comp_code
== COMP_STOP_INVAL
)) {
2504 xhci_warn(xhci
, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
2505 TRB_TO_SLOT_ID(le32_to_cpu(event
->flags
)),
2507 xhci_dbg(xhci
, "Event TRB with TRB type ID %u\n",
2508 (le32_to_cpu(event
->flags
) &
2509 TRB_TYPE_BITMASK
)>>10);
2510 xhci_print_trb_offsets(xhci
, (union xhci_trb
*) event
);
2514 xhci_dbg(xhci
, "td_list is empty while skip "
2515 "flag set. Clear skip flag.\n");
2521 /* We've skipped all the TDs on the ep ring when ep->skip set */
2522 if (ep
->skip
&& td_num
== 0) {
2524 xhci_dbg(xhci
, "All tds on the ep_ring skipped. "
2525 "Clear skip flag.\n");
2530 td
= list_entry(ep_ring
->td_list
.next
, struct xhci_td
, td_list
);
2534 /* Is this a TRB in the currently executing TD? */
2535 event_seg
= trb_in_td(ep_ring
->deq_seg
, ep_ring
->dequeue
,
2536 td
->last_trb
, event_dma
);
2539 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
2540 * is not in the current TD pointed by ep_ring->dequeue because
2541 * that the hardware dequeue pointer still at the previous TRB
2542 * of the current TD. The previous TRB maybe a Link TD or the
2543 * last TRB of the previous TD. The command completion handle
2544 * will take care the rest.
2546 if (!event_seg
&& (trb_comp_code
== COMP_STOP
||
2547 trb_comp_code
== COMP_STOP_INVAL
)) {
2554 !usb_endpoint_xfer_isoc(&td
->urb
->ep
->desc
)) {
2555 /* Some host controllers give a spurious
2556 * successful event after a short transfer.
2559 if ((xhci
->quirks
& XHCI_SPURIOUS_SUCCESS
) &&
2560 ep_ring
->last_td_was_short
) {
2561 ep_ring
->last_td_was_short
= false;
2565 /* HC is busted, give up! */
2567 "ERROR Transfer event TRB DMA ptr not "
2568 "part of current TD\n");
2572 ret
= skip_isoc_td(xhci
, td
, event
, ep
, &status
);
2575 if (trb_comp_code
== COMP_SHORT_TX
)
2576 ep_ring
->last_td_was_short
= true;
2578 ep_ring
->last_td_was_short
= false;
2581 xhci_dbg(xhci
, "Found td. Clear skip flag.\n");
2585 event_trb
= &event_seg
->trbs
[(event_dma
- event_seg
->dma
) /
2586 sizeof(*event_trb
)];
2588 * No-op TRB should not trigger interrupts.
2589 * If event_trb is a no-op TRB, it means the
2590 * corresponding TD has been cancelled. Just ignore
2593 if (TRB_TYPE_NOOP_LE32(event_trb
->generic
.field
[3])) {
2595 "event_trb is a no-op TRB. Skip it\n");
2599 /* Now update the urb's actual_length and give back to
2602 if (usb_endpoint_xfer_control(&td
->urb
->ep
->desc
))
2603 ret
= process_ctrl_td(xhci
, td
, event_trb
, event
, ep
,
2605 else if (usb_endpoint_xfer_isoc(&td
->urb
->ep
->desc
))
2606 ret
= process_isoc_td(xhci
, td
, event_trb
, event
, ep
,
2609 ret
= process_bulk_intr_td(xhci
, td
, event_trb
, event
,
2614 * Do not update event ring dequeue pointer if ep->skip is set.
2615 * Will roll back to continue process missed tds.
2617 if (trb_comp_code
== COMP_MISSED_INT
|| !ep
->skip
) {
2618 inc_deq(xhci
, xhci
->event_ring
);
2623 urb_priv
= urb
->hcpriv
;
2624 /* Leave the TD around for the reset endpoint function
2625 * to use(but only if it's not a control endpoint,
2626 * since we already queued the Set TR dequeue pointer
2627 * command for stalled control endpoints).
2629 if (usb_endpoint_xfer_control(&urb
->ep
->desc
) ||
2630 (trb_comp_code
!= COMP_STALL
&&
2631 trb_comp_code
!= COMP_BABBLE
))
2632 xhci_urb_free_priv(xhci
, urb_priv
);
2636 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb
->dev
->bus
), urb
);
2637 if ((urb
->actual_length
!= urb
->transfer_buffer_length
&&
2638 (urb
->transfer_flags
&
2639 URB_SHORT_NOT_OK
)) ||
2641 !usb_endpoint_xfer_isoc(&urb
->ep
->desc
)))
2642 xhci_dbg(xhci
, "Giveback URB %p, len = %d, "
2643 "expected = %d, status = %d\n",
2644 urb
, urb
->actual_length
,
2645 urb
->transfer_buffer_length
,
2647 spin_unlock(&xhci
->lock
);
2648 /* EHCI, UHCI, and OHCI always unconditionally set the
2649 * urb->status of an isochronous endpoint to 0.
2651 if (usb_pipetype(urb
->pipe
) == PIPE_ISOCHRONOUS
)
2653 usb_hcd_giveback_urb(bus_to_hcd(urb
->dev
->bus
), urb
, status
);
2654 spin_lock(&xhci
->lock
);
2658 * If ep->skip is set, it means there are missed tds on the
2659 * endpoint ring need to take care of.
2660 * Process them as short transfer until reach the td pointed by
2663 } while (ep
->skip
&& trb_comp_code
!= COMP_MISSED_INT
);
2669 * This function handles all OS-owned events on the event ring. It may drop
2670 * xhci->lock between event processing (e.g. to pass up port status changes).
2671 * Returns >0 for "possibly more events to process" (caller should call again),
2672 * otherwise 0 if done. In future, <0 returns should indicate error code.
2674 static int xhci_handle_event(struct xhci_hcd
*xhci
)
2676 union xhci_trb
*event
;
2677 int update_ptrs
= 1;
2680 if (!xhci
->event_ring
|| !xhci
->event_ring
->dequeue
) {
2681 xhci
->error_bitmask
|= 1 << 1;
2685 event
= xhci
->event_ring
->dequeue
;
2686 /* Does the HC or OS own the TRB? */
2687 if ((le32_to_cpu(event
->event_cmd
.flags
) & TRB_CYCLE
) !=
2688 xhci
->event_ring
->cycle_state
) {
2689 xhci
->error_bitmask
|= 1 << 2;
2694 * Barrier between reading the TRB_CYCLE (valid) flag above and any
2695 * speculative reads of the event's flags/data below.
2698 /* FIXME: Handle more event types. */
2699 switch ((le32_to_cpu(event
->event_cmd
.flags
) & TRB_TYPE_BITMASK
)) {
2700 case TRB_TYPE(TRB_COMPLETION
):
2701 handle_cmd_completion(xhci
, &event
->event_cmd
);
2703 case TRB_TYPE(TRB_PORT_STATUS
):
2704 handle_port_status(xhci
, event
);
2707 case TRB_TYPE(TRB_TRANSFER
):
2708 ret
= handle_tx_event(xhci
, &event
->trans_event
);
2710 xhci
->error_bitmask
|= 1 << 9;
2714 case TRB_TYPE(TRB_DEV_NOTE
):
2715 handle_device_notification(xhci
, event
);
2718 if ((le32_to_cpu(event
->event_cmd
.flags
) & TRB_TYPE_BITMASK
) >=
2720 handle_vendor_event(xhci
, event
);
2722 xhci
->error_bitmask
|= 1 << 3;
2724 /* Any of the above functions may drop and re-acquire the lock, so check
2725 * to make sure a watchdog timer didn't mark the host as non-responsive.
2727 if (xhci
->xhc_state
& XHCI_STATE_DYING
) {
2728 xhci_dbg(xhci
, "xHCI host dying, returning from "
2729 "event handler.\n");
2734 /* Update SW event ring dequeue pointer */
2735 inc_deq(xhci
, xhci
->event_ring
);
2737 /* Are there more items on the event ring? Caller will call us again to
2744 * xHCI spec says we can get an interrupt, and if the HC has an error condition,
2745 * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
2746 * indicators of an event TRB error, but we check the status *first* to be safe.
2748 irqreturn_t
xhci_irq(struct usb_hcd
*hcd
)
2750 struct xhci_hcd
*xhci
= hcd_to_xhci(hcd
);
2753 union xhci_trb
*event_ring_deq
;
2756 spin_lock(&xhci
->lock
);
2757 /* Check if the xHC generated the interrupt, or the irq is shared */
2758 status
= xhci_readl(xhci
, &xhci
->op_regs
->status
);
2759 if (status
== 0xffffffff)
2762 if (!(status
& STS_EINT
)) {
2763 spin_unlock(&xhci
->lock
);
2766 if (status
& STS_FATAL
) {
2767 xhci_warn(xhci
, "WARNING: Host System Error\n");
2770 spin_unlock(&xhci
->lock
);
2775 * Clear the op reg interrupt status first,
2776 * so we can receive interrupts from other MSI-X interrupters.
2777 * Write 1 to clear the interrupt status.
2780 xhci_writel(xhci
, status
, &xhci
->op_regs
->status
);
2781 /* FIXME when MSI-X is supported and there are multiple vectors */
2782 /* Clear the MSI-X event interrupt status */
2786 /* Acknowledge the PCI interrupt */
2787 irq_pending
= xhci_readl(xhci
, &xhci
->ir_set
->irq_pending
);
2788 irq_pending
|= IMAN_IP
;
2789 xhci_writel(xhci
, irq_pending
, &xhci
->ir_set
->irq_pending
);
2792 if (xhci
->xhc_state
& XHCI_STATE_DYING
) {
2793 xhci_dbg(xhci
, "xHCI dying, ignoring interrupt. "
2794 "Shouldn't IRQs be disabled?\n");
2795 /* Clear the event handler busy flag (RW1C);
2796 * the event ring should be empty.
2798 temp_64
= xhci_read_64(xhci
, &xhci
->ir_set
->erst_dequeue
);
2799 xhci_write_64(xhci
, temp_64
| ERST_EHB
,
2800 &xhci
->ir_set
->erst_dequeue
);
2801 spin_unlock(&xhci
->lock
);
2806 event_ring_deq
= xhci
->event_ring
->dequeue
;
2807 /* FIXME this should be a delayed service routine
2808 * that clears the EHB.
2810 while (xhci_handle_event(xhci
) > 0) {}
2812 temp_64
= xhci_read_64(xhci
, &xhci
->ir_set
->erst_dequeue
);
2813 /* If necessary, update the HW's version of the event ring deq ptr. */
2814 if (event_ring_deq
!= xhci
->event_ring
->dequeue
) {
2815 deq
= xhci_trb_virt_to_dma(xhci
->event_ring
->deq_seg
,
2816 xhci
->event_ring
->dequeue
);
2818 xhci_warn(xhci
, "WARN something wrong with SW event "
2819 "ring dequeue ptr.\n");
2820 /* Update HC event ring dequeue pointer */
2821 temp_64
&= ERST_PTR_MASK
;
2822 temp_64
|= ((u64
) deq
& (u64
) ~ERST_PTR_MASK
);
2825 /* Clear the event handler busy flag (RW1C); event ring is empty. */
2826 temp_64
|= ERST_EHB
;
2827 xhci_write_64(xhci
, temp_64
, &xhci
->ir_set
->erst_dequeue
);
2829 spin_unlock(&xhci
->lock
);
2834 irqreturn_t
xhci_msi_irq(int irq
, struct usb_hcd
*hcd
)
2836 return xhci_irq(hcd
);
2839 /**** Endpoint Ring Operations ****/
2842 * Generic function for queueing a TRB on a ring.
2843 * The caller must have checked to make sure there's room on the ring.
2845 * @more_trbs_coming: Will you enqueue more TRBs before calling
2846 * prepare_transfer()?
2848 static void queue_trb(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
2849 bool more_trbs_coming
,
2850 u32 field1
, u32 field2
, u32 field3
, u32 field4
)
2852 struct xhci_generic_trb
*trb
;
2854 trb
= &ring
->enqueue
->generic
;
2855 trb
->field
[0] = cpu_to_le32(field1
);
2856 trb
->field
[1] = cpu_to_le32(field2
);
2857 trb
->field
[2] = cpu_to_le32(field3
);
2858 trb
->field
[3] = cpu_to_le32(field4
);
2859 inc_enq(xhci
, ring
, more_trbs_coming
);
2863 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
2864 * FIXME allocate segments if the ring is full.
2866 static int prepare_ring(struct xhci_hcd
*xhci
, struct xhci_ring
*ep_ring
,
2867 u32 ep_state
, unsigned int num_trbs
, gfp_t mem_flags
)
2869 unsigned int num_trbs_needed
;
2871 /* Make sure the endpoint has been added to xHC schedule */
2873 case EP_STATE_DISABLED
:
2875 * USB core changed config/interfaces without notifying us,
2876 * or hardware is reporting the wrong state.
2878 xhci_warn(xhci
, "WARN urb submitted to disabled ep\n");
2880 case EP_STATE_ERROR
:
2881 xhci_warn(xhci
, "WARN waiting for error on ep to be cleared\n");
2882 /* FIXME event handling code for error needs to clear it */
2883 /* XXX not sure if this should be -ENOENT or not */
2885 case EP_STATE_HALTED
:
2886 xhci_dbg(xhci
, "WARN halted endpoint, queueing URB anyway.\n");
2887 case EP_STATE_STOPPED
:
2888 case EP_STATE_RUNNING
:
2891 xhci_err(xhci
, "ERROR unknown endpoint state for ep\n");
2893 * FIXME issue Configure Endpoint command to try to get the HC
2894 * back into a known state.
2900 if (room_on_ring(xhci
, ep_ring
, num_trbs
))
2903 if (ep_ring
== xhci
->cmd_ring
) {
2904 xhci_err(xhci
, "Do not support expand command ring\n");
2908 xhci_dbg(xhci
, "ERROR no room on ep ring, "
2909 "try ring expansion\n");
2910 num_trbs_needed
= num_trbs
- ep_ring
->num_trbs_free
;
2911 if (xhci_ring_expansion(xhci
, ep_ring
, num_trbs_needed
,
2913 xhci_err(xhci
, "Ring expansion failed\n");
2918 if (enqueue_is_link_trb(ep_ring
)) {
2919 struct xhci_ring
*ring
= ep_ring
;
2920 union xhci_trb
*next
;
2922 next
= ring
->enqueue
;
2924 while (last_trb(xhci
, ring
, ring
->enq_seg
, next
)) {
2925 /* If we're not dealing with 0.95 hardware or isoc rings
2926 * on AMD 0.96 host, clear the chain bit.
2928 #ifndef CONFIG_MTK_XHCI
2929 if (!xhci_link_trb_quirk(xhci
) &&
2930 !(ring
->type
== TYPE_ISOC
&&
2931 (xhci
->quirks
& XHCI_AMD_0x96_HOST
)))
2932 next
->link
.control
&= cpu_to_le32(~TRB_CHAIN
);
2934 next
->link
.control
|= cpu_to_le32(TRB_CHAIN
);
2936 next
->link
.control
&= cpu_to_le32(~TRB_CHAIN
);
2939 next
->link
.control
^= cpu_to_le32(TRB_CYCLE
);
2941 /* Toggle the cycle bit after the last ring segment. */
2942 if (last_trb_on_last_seg(xhci
, ring
, ring
->enq_seg
, next
)) {
2943 ring
->cycle_state
= (ring
->cycle_state
? 0 : 1);
2945 ring
->enq_seg
= ring
->enq_seg
->next
;
2946 ring
->enqueue
= ring
->enq_seg
->trbs
;
2947 next
= ring
->enqueue
;
2954 static int prepare_transfer(struct xhci_hcd
*xhci
,
2955 struct xhci_virt_device
*xdev
,
2956 unsigned int ep_index
,
2957 unsigned int stream_id
,
2958 unsigned int num_trbs
,
2960 unsigned int td_index
,
2964 struct urb_priv
*urb_priv
;
2966 struct xhci_ring
*ep_ring
;
2967 struct xhci_ep_ctx
*ep_ctx
= xhci_get_ep_ctx(xhci
, xdev
->out_ctx
, ep_index
);
2969 ep_ring
= xhci_stream_id_to_ring(xdev
, ep_index
, stream_id
);
2971 xhci_dbg(xhci
, "Can't prepare ring for bad stream ID %u\n",
2976 ret
= prepare_ring(xhci
, ep_ring
,
2977 le32_to_cpu(ep_ctx
->ep_info
) & EP_STATE_MASK
,
2978 num_trbs
, mem_flags
);
2982 urb_priv
= urb
->hcpriv
;
2983 td
= urb_priv
->td
[td_index
];
2985 INIT_LIST_HEAD(&td
->td_list
);
2986 INIT_LIST_HEAD(&td
->cancelled_td_list
);
2988 if (td_index
== 0) {
2989 ret
= usb_hcd_link_urb_to_ep(bus_to_hcd(urb
->dev
->bus
), urb
);
2995 /* Add this TD to the tail of the endpoint ring's TD list */
2996 list_add_tail(&td
->td_list
, &ep_ring
->td_list
);
2997 td
->start_seg
= ep_ring
->enq_seg
;
2998 td
->first_trb
= ep_ring
->enqueue
;
3000 urb_priv
->td
[td_index
] = td
;
3005 static unsigned int count_sg_trbs_needed(struct xhci_hcd
*xhci
, struct urb
*urb
)
3007 int num_sgs
, num_trbs
, running_total
, temp
, i
;
3008 struct scatterlist
*sg
;
3011 num_sgs
= urb
->num_mapped_sgs
;
3012 temp
= urb
->transfer_buffer_length
;
3015 for_each_sg(urb
->sg
, sg
, num_sgs
, i
) {
3016 unsigned int len
= sg_dma_len(sg
);
3018 /* Scatter gather list entries may cross 64KB boundaries */
3019 running_total
= TRB_MAX_BUFF_SIZE
-
3020 (sg_dma_address(sg
) & (TRB_MAX_BUFF_SIZE
- 1));
3021 running_total
&= TRB_MAX_BUFF_SIZE
- 1;
3022 if (running_total
!= 0)
3025 /* How many more 64KB chunks to transfer, how many more TRBs? */
3026 while (running_total
< sg_dma_len(sg
) && running_total
< temp
) {
3028 running_total
+= TRB_MAX_BUFF_SIZE
;
3030 len
= min_t(int, len
, temp
);
3038 static void check_trb_math(struct urb
*urb
, int num_trbs
, int running_total
)
3041 dev_err(&urb
->dev
->dev
, "%s - ep %#x - Miscalculated number of "
3042 "TRBs, %d left\n", __func__
,
3043 urb
->ep
->desc
.bEndpointAddress
, num_trbs
);
3044 if (running_total
!= urb
->transfer_buffer_length
)
3045 dev_err(&urb
->dev
->dev
, "%s - ep %#x - Miscalculated tx length, "
3046 "queued %#x (%d), asked for %#x (%d)\n",
3048 urb
->ep
->desc
.bEndpointAddress
,
3049 running_total
, running_total
,
3050 urb
->transfer_buffer_length
,
3051 urb
->transfer_buffer_length
);
3054 static void giveback_first_trb(struct xhci_hcd
*xhci
, int slot_id
,
3055 unsigned int ep_index
, unsigned int stream_id
, int start_cycle
,
3056 struct xhci_generic_trb
*start_trb
)
3059 * Pass all the TRBs to the hardware at once and make sure this write
3064 start_trb
->field
[3] |= cpu_to_le32(start_cycle
);
3066 start_trb
->field
[3] &= cpu_to_le32(~TRB_CYCLE
);
3067 xhci_ring_ep_doorbell(xhci
, slot_id
, ep_index
, stream_id
);
3071 * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
3072 * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
3073 * (comprised of sg list entries) can take several service intervals to
3076 int xhci_queue_intr_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3077 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3079 struct xhci_ep_ctx
*ep_ctx
= xhci_get_ep_ctx(xhci
,
3080 xhci
->devs
[slot_id
]->out_ctx
, ep_index
);
3084 xhci_interval
= EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx
->ep_info
));
3085 ep_interval
= urb
->interval
;
3086 /* Convert to microframes */
3087 if (urb
->dev
->speed
== USB_SPEED_LOW
||
3088 urb
->dev
->speed
== USB_SPEED_FULL
)
3090 /* FIXME change this to a warning and a suggestion to use the new API
3091 * to set the polling interval (once the API is added).
3093 if (xhci_interval
!= ep_interval
) {
3094 if (printk_ratelimit())
3095 dev_dbg(&urb
->dev
->dev
, "Driver uses different interval"
3096 " (%d microframe%s) than xHCI "
3097 "(%d microframe%s)\n",
3099 ep_interval
== 1 ? "" : "s",
3101 xhci_interval
== 1 ? "" : "s");
3102 urb
->interval
= xhci_interval
;
3103 /* Convert back to frames for LS/FS devices */
3104 if (urb
->dev
->speed
== USB_SPEED_LOW
||
3105 urb
->dev
->speed
== USB_SPEED_FULL
)
3108 return xhci_queue_bulk_tx(xhci
, mem_flags
, urb
, slot_id
, ep_index
);
3112 * The TD size is the number of bytes remaining in the TD (including this TRB),
3113 * right shifted by 10.
3114 * It must fit in bits 21:17, so it can't be bigger than 31.
3116 #ifdef CONFIG_MTK_XHCI
3117 static u32
xhci_td_remainder(unsigned int td_transfer_size
, unsigned int td_running_total
3118 , unsigned int maxp
, unsigned trb_buffer_length
)
3121 int remainder
, td_packet_count
, packet_transferred
;
3123 //0 for the last TRB
3124 //FIXME: need to workaround if there is ZLP in this TD
3125 if (td_running_total
+ trb_buffer_length
== td_transfer_size
)
3128 //FIXME: need to take care of high-bandwidth (MAX_ESIT)
3129 packet_transferred
= (td_running_total
/*+ trb_buffer_length*/) / maxp
;
3130 td_packet_count
= DIV_ROUND_UP(td_transfer_size
, maxp
);
3131 remainder
= td_packet_count
- packet_transferred
;
3133 if (remainder
> max
)
3136 return remainder
<< 17;
3139 static u32
xhci_td_remainder(unsigned int remainder
)
3141 u32 max
= (1 << (21 - 17 + 1)) - 1;
3143 if ((remainder
>> 10) >= max
)
3146 return (remainder
>> 10) << 17;
3151 #ifndef CONFIG_MTK_XHCI
3153 * For xHCI 1.0 host controllers, TD size is the number of max packet sized
3154 * packets remaining in the TD (*not* including this TRB).
3156 * Total TD packet count = total_packet_count =
3157 * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
3159 * Packets transferred up to and including this TRB = packets_transferred =
3160 * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
3162 * TD size = total_packet_count - packets_transferred
3164 * It must fit in bits 21:17, so it can't be bigger than 31.
3165 * The last TRB in a TD must have the TD size set to zero.
3167 static u32
xhci_v1_0_td_remainder(int running_total
, int trb_buff_len
,
3168 unsigned int total_packet_count
, struct urb
*urb
,
3169 unsigned int num_trbs_left
)
3171 int packets_transferred
;
3173 /* One TRB with a zero-length data packet. */
3174 if (num_trbs_left
== 0 || (running_total
== 0 && trb_buff_len
== 0))
3177 /* All the TRB queueing functions don't count the current TRB in
3180 packets_transferred
= (running_total
+ trb_buff_len
) /
3181 GET_MAX_PACKET(usb_endpoint_maxp(&urb
->ep
->desc
));
3183 if ((total_packet_count
- packets_transferred
) > 31)
3185 return (total_packet_count
- packets_transferred
) << 17;
3189 static int queue_bulk_sg_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3190 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3192 struct xhci_ring
*ep_ring
;
3193 unsigned int num_trbs
;
3194 struct urb_priv
*urb_priv
;
3196 struct scatterlist
*sg
;
3198 int trb_buff_len
, this_sg_len
, running_total
;
3199 unsigned int total_packet_count
;
3202 bool more_trbs_coming
;
3204 struct xhci_generic_trb
*start_trb
;
3207 ep_ring
= xhci_urb_to_transfer_ring(xhci
, urb
);
3211 num_trbs
= count_sg_trbs_needed(xhci
, urb
);
3212 num_sgs
= urb
->num_mapped_sgs
;
3213 total_packet_count
= DIV_ROUND_UP(urb
->transfer_buffer_length
,
3214 usb_endpoint_maxp(&urb
->ep
->desc
));
3216 trb_buff_len
= prepare_transfer(xhci
, xhci
->devs
[slot_id
],
3217 ep_index
, urb
->stream_id
,
3218 num_trbs
, urb
, 0, mem_flags
);
3219 if (trb_buff_len
< 0)
3220 return trb_buff_len
;
3222 urb_priv
= urb
->hcpriv
;
3223 td
= urb_priv
->td
[0];
3226 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3227 * until we've finished creating all the other TRBs. The ring's cycle
3228 * state may change as we enqueue the other TRBs, so save it too.
3230 start_trb
= &ep_ring
->enqueue
->generic
;
3231 start_cycle
= ep_ring
->cycle_state
;
3235 * How much data is in the first TRB?
3237 * There are three forces at work for TRB buffer pointers and lengths:
3238 * 1. We don't want to walk off the end of this sg-list entry buffer.
3239 * 2. The transfer length that the driver requested may be smaller than
3240 * the amount of memory allocated for this scatter-gather list.
3241 * 3. TRBs buffers can't cross 64KB boundaries.
3244 addr
= (u64
) sg_dma_address(sg
);
3245 this_sg_len
= sg_dma_len(sg
);
3246 trb_buff_len
= TRB_MAX_BUFF_SIZE
- (addr
& (TRB_MAX_BUFF_SIZE
- 1));
3247 trb_buff_len
= min_t(int, trb_buff_len
, this_sg_len
);
3248 if (trb_buff_len
> urb
->transfer_buffer_length
)
3249 trb_buff_len
= urb
->transfer_buffer_length
;
3252 /* Queue the first TRB, even if it's zero-length */
3255 u32 length_field
= 0;
3258 /* Don't change the cycle bit of the first TRB until later */
3261 if (start_cycle
== 0)
3264 field
|= ep_ring
->cycle_state
;
3266 /* Chain all the TRBs together; clear the chain bit in the last
3267 * TRB to indicate it's the last TRB in the chain.
3272 /* FIXME - add check for ZERO_PACKET flag before this */
3273 td
->last_trb
= ep_ring
->enqueue
;
3277 /* Only set interrupt on short packet for IN endpoints */
3278 if (usb_urb_dir_in(urb
))
3281 if (TRB_MAX_BUFF_SIZE
-
3282 (addr
& (TRB_MAX_BUFF_SIZE
- 1)) < trb_buff_len
) {
3283 xhci_warn(xhci
, "WARN: sg dma xfer crosses 64KB boundaries!\n");
3284 xhci_dbg(xhci
, "Next boundary at %#x, end dma = %#x\n",
3285 (unsigned int) (addr
+ TRB_MAX_BUFF_SIZE
) & ~(TRB_MAX_BUFF_SIZE
- 1),
3286 (unsigned int) addr
+ trb_buff_len
);
3289 /* Set the TRB length, TD size, and interrupter fields. */
3290 #ifdef CONFIG_MTK_XHCI
3292 remainder
= xhci_td_remainder(urb
->transfer_buffer_length
,
3293 running_total
, urb
->ep
->desc
.wMaxPacketSize
, trb_buff_len
);
3296 /* Set the TRB length, TD size, and interrupter fields. */
3297 if (xhci
->hci_version
< 0x100) {
3298 remainder
= xhci_td_remainder(
3299 urb
->transfer_buffer_length
-
3302 remainder
= xhci_v1_0_td_remainder(running_total
,
3303 trb_buff_len
, total_packet_count
, urb
,
3308 length_field
= TRB_LEN(trb_buff_len
) |
3313 more_trbs_coming
= true;
3315 more_trbs_coming
= false;
3316 queue_trb(xhci
, ep_ring
, more_trbs_coming
,
3317 lower_32_bits(addr
),
3318 upper_32_bits(addr
),
3320 field
| TRB_TYPE(TRB_NORMAL
));
3322 running_total
+= trb_buff_len
;
3324 /* Calculate length for next transfer --
3325 * Are we done queueing all the TRBs for this sg entry?
3327 this_sg_len
-= trb_buff_len
;
3328 if (this_sg_len
== 0) {
3333 addr
= (u64
) sg_dma_address(sg
);
3334 this_sg_len
= sg_dma_len(sg
);
3336 addr
+= trb_buff_len
;
3339 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
3340 (addr
& (TRB_MAX_BUFF_SIZE
- 1));
3341 trb_buff_len
= min_t(int, trb_buff_len
, this_sg_len
);
3342 if (running_total
+ trb_buff_len
> urb
->transfer_buffer_length
)
3344 urb
->transfer_buffer_length
- running_total
;
3345 } while (running_total
< urb
->transfer_buffer_length
);
3347 check_trb_math(urb
, num_trbs
, running_total
);
3348 giveback_first_trb(xhci
, slot_id
, ep_index
, urb
->stream_id
,
3349 start_cycle
, start_trb
);
3353 /* This is very similar to what ehci-q.c qtd_fill() does */
3354 int xhci_queue_bulk_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3355 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3357 struct xhci_ring
*ep_ring
;
3358 struct urb_priv
*urb_priv
;
3361 struct xhci_generic_trb
*start_trb
;
3363 bool more_trbs_coming
;
3365 u32 field
, length_field
;
3366 #ifdef CONFIG_MTK_XHCI
3367 int max_packet
= USB_SPEED_HIGH
;
3369 int running_total
, trb_buff_len
, ret
;
3370 unsigned int total_packet_count
;
3374 return queue_bulk_sg_tx(xhci
, mem_flags
, urb
, slot_id
, ep_index
);
3376 ep_ring
= xhci_urb_to_transfer_ring(xhci
, urb
);
3381 /* How much data is (potentially) left before the 64KB boundary? */
3382 running_total
= TRB_MAX_BUFF_SIZE
-
3383 (urb
->transfer_dma
& (TRB_MAX_BUFF_SIZE
- 1));
3384 running_total
&= TRB_MAX_BUFF_SIZE
- 1;
3386 /* If there's some data on this 64KB chunk, or we have to send a
3387 * zero-length transfer, we need at least one TRB
3389 if (running_total
!= 0 || urb
->transfer_buffer_length
== 0)
3391 /* How many more 64KB chunks to transfer, how many more TRBs? */
3392 while (running_total
< urb
->transfer_buffer_length
) {
3394 running_total
+= TRB_MAX_BUFF_SIZE
;
3396 /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
3398 #ifdef CONFIG_MTK_XHCI
3399 switch(urb
->dev
->speed
){
3400 case USB_SPEED_SUPER
:
3401 max_packet
= urb
->ep
->desc
.wMaxPacketSize
;
3403 case USB_SPEED_HIGH
:
3404 case USB_SPEED_FULL
:
3407 max_packet
= urb
->ep
->desc
.wMaxPacketSize
& 0x7ff;
3410 if((urb
->transfer_flags
& URB_ZERO_PACKET
)
3411 && ((urb
->transfer_buffer_length
% max_packet
) == 0)){
3416 ret
= prepare_transfer(xhci
, xhci
->devs
[slot_id
],
3417 ep_index
, urb
->stream_id
,
3418 num_trbs
, urb
, 0, mem_flags
);
3422 urb_priv
= urb
->hcpriv
;
3423 td
= urb_priv
->td
[0];
3426 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3427 * until we've finished creating all the other TRBs. The ring's cycle
3428 * state may change as we enqueue the other TRBs, so save it too.
3430 start_trb
= &ep_ring
->enqueue
->generic
;
3431 start_cycle
= ep_ring
->cycle_state
;
3434 total_packet_count
= DIV_ROUND_UP(urb
->transfer_buffer_length
,
3435 usb_endpoint_maxp(&urb
->ep
->desc
));
3436 /* How much data is in the first TRB? */
3437 addr
= (u64
) urb
->transfer_dma
;
3438 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
3439 (urb
->transfer_dma
& (TRB_MAX_BUFF_SIZE
- 1));
3440 if (trb_buff_len
> urb
->transfer_buffer_length
)
3441 trb_buff_len
= urb
->transfer_buffer_length
;
3445 /* Queue the first TRB, even if it's zero-length */
3450 /* Don't change the cycle bit of the first TRB until later */
3453 if (start_cycle
== 0)
3456 field
|= ep_ring
->cycle_state
;
3458 /* Chain all the TRBs together; clear the chain bit in the last
3459 * TRB to indicate it's the last TRB in the chain.
3464 /* FIXME - add check for ZERO_PACKET flag before this */
3465 td
->last_trb
= ep_ring
->enqueue
;
3469 /* Only set interrupt on short packet for IN endpoints */
3470 if (usb_urb_dir_in(urb
))
3472 #ifdef CONFIG_MTK_XHCI
3473 remainder
= xhci_td_remainder(urb
->transfer_buffer_length
, running_total
, max_packet
, trb_buff_len
);
3475 /* Set the TRB length, TD size, and interrupter fields. */
3476 if (xhci
->hci_version
< 0x100) {
3477 remainder
= xhci_td_remainder(
3478 urb
->transfer_buffer_length
-
3481 remainder
= xhci_v1_0_td_remainder(running_total
,
3482 trb_buff_len
, total_packet_count
, urb
,
3486 length_field
= TRB_LEN(trb_buff_len
) |
3491 more_trbs_coming
= true;
3493 more_trbs_coming
= false;
3494 queue_trb(xhci
, ep_ring
, more_trbs_coming
,
3495 lower_32_bits(addr
),
3496 upper_32_bits(addr
),
3498 field
| TRB_TYPE(TRB_NORMAL
));
3500 running_total
+= trb_buff_len
;
3502 /* Calculate length for next transfer */
3503 addr
+= trb_buff_len
;
3504 trb_buff_len
= urb
->transfer_buffer_length
- running_total
;
3505 if (trb_buff_len
> TRB_MAX_BUFF_SIZE
)
3506 trb_buff_len
= TRB_MAX_BUFF_SIZE
;
3507 } while (running_total
< urb
->transfer_buffer_length
);
3509 check_trb_math(urb
, num_trbs
, running_total
);
3510 giveback_first_trb(xhci
, slot_id
, ep_index
, urb
->stream_id
,
3511 start_cycle
, start_trb
);
3515 /* Caller must have locked xhci->lock */
3516 int xhci_queue_ctrl_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3517 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3519 struct xhci_ring
*ep_ring
;
3522 struct usb_ctrlrequest
*setup
;
3523 struct xhci_generic_trb
*start_trb
;
3525 u32 field
, length_field
;
3526 struct urb_priv
*urb_priv
;
3529 ep_ring
= xhci_urb_to_transfer_ring(xhci
, urb
);
3534 * Need to copy setup packet into setup TRB, so we can't use the setup
3537 if (!urb
->setup_packet
)
3540 /* 1 TRB for setup, 1 for status */
3543 * Don't need to check if we need additional event data and normal TRBs,
3544 * since data in control transfers will never get bigger than 16MB
3545 * XXX: can we get a buffer that crosses 64KB boundaries?
3547 if (urb
->transfer_buffer_length
> 0)
3549 ret
= prepare_transfer(xhci
, xhci
->devs
[slot_id
],
3550 ep_index
, urb
->stream_id
,
3551 num_trbs
, urb
, 0, mem_flags
);
3555 urb_priv
= urb
->hcpriv
;
3556 td
= urb_priv
->td
[0];
3559 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3560 * until we've finished creating all the other TRBs. The ring's cycle
3561 * state may change as we enqueue the other TRBs, so save it too.
3563 start_trb
= &ep_ring
->enqueue
->generic
;
3564 start_cycle
= ep_ring
->cycle_state
;
3566 /* Queue setup TRB - see section 6.4.1.2.1 */
3567 /* FIXME better way to translate setup_packet into two u32 fields? */
3568 setup
= (struct usb_ctrlrequest
*) urb
->setup_packet
;
3570 field
|= TRB_IDT
| TRB_TYPE(TRB_SETUP
);
3571 if (start_cycle
== 0)
3574 /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
3575 #ifdef CONFIG_MTK_XHCI
3578 if (xhci
->hci_version
== 0x100) {
3580 if (urb
->transfer_buffer_length
> 0) {
3581 if (setup
->bRequestType
& USB_DIR_IN
)
3582 field
|= TRB_TX_TYPE(TRB_DATA_IN
);
3584 field
|= TRB_TX_TYPE(TRB_DATA_OUT
);
3588 queue_trb(xhci
, ep_ring
, true,
3589 setup
->bRequestType
| setup
->bRequest
<< 8 | le16_to_cpu(setup
->wValue
) << 16,
3590 le16_to_cpu(setup
->wIndex
) | le16_to_cpu(setup
->wLength
) << 16,
3591 TRB_LEN(8) | TRB_INTR_TARGET(0),
3592 /* Immediate data in pointer */
3595 /* If there's data, queue data TRBs */
3596 /* Only set interrupt on short packet for IN endpoints */
3597 if (usb_urb_dir_in(urb
))
3598 field
= TRB_ISP
| TRB_TYPE(TRB_DATA
);
3600 field
= TRB_TYPE(TRB_DATA
);
3602 length_field
= TRB_LEN(urb
->transfer_buffer_length
) |
3603 #ifdef CONFIG_MTK_XHCI
3604 //CC: MTK style, no scatter-gather for control transfer
3607 xhci_td_remainder(urb
->transfer_buffer_length
) |
3610 if (urb
->transfer_buffer_length
> 0) {
3611 if (setup
->bRequestType
& USB_DIR_IN
)
3612 field
|= TRB_DIR_IN
;
3613 queue_trb(xhci
, ep_ring
, true,
3614 lower_32_bits(urb
->transfer_dma
),
3615 upper_32_bits(urb
->transfer_dma
),
3617 field
| ep_ring
->cycle_state
);
3620 /* Save the DMA address of the last TRB in the TD */
3621 td
->last_trb
= ep_ring
->enqueue
;
3623 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3624 /* If the device sent data, the status stage is an OUT transfer */
3625 if (urb
->transfer_buffer_length
> 0 && setup
->bRequestType
& USB_DIR_IN
)
3629 queue_trb(xhci
, ep_ring
, false,
3633 /* Event on completion */
3634 field
| TRB_IOC
| TRB_TYPE(TRB_STATUS
) | ep_ring
->cycle_state
);
3636 giveback_first_trb(xhci
, slot_id
, ep_index
, 0,
3637 start_cycle
, start_trb
);
3641 static int count_isoc_trbs_needed(struct xhci_hcd
*xhci
,
3642 struct urb
*urb
, int i
)
3647 addr
= (u64
) (urb
->transfer_dma
+ urb
->iso_frame_desc
[i
].offset
);
3648 td_len
= urb
->iso_frame_desc
[i
].length
;
3650 num_trbs
= DIV_ROUND_UP(td_len
+ (addr
& (TRB_MAX_BUFF_SIZE
- 1)),
3659 * The transfer burst count field of the isochronous TRB defines the number of
3660 * bursts that are required to move all packets in this TD. Only SuperSpeed
3661 * devices can burst up to bMaxBurst number of packets per service interval.
3662 * This field is zero based, meaning a value of zero in the field means one
3663 * burst. Basically, for everything but SuperSpeed devices, this field will be
3664 * zero. Only xHCI 1.0 host controllers support this field.
3666 static unsigned int xhci_get_burst_count(struct xhci_hcd
*xhci
,
3667 struct usb_device
*udev
,
3668 struct urb
*urb
, unsigned int total_packet_count
)
3670 unsigned int max_burst
;
3672 if (xhci
->hci_version
< 0x100 || udev
->speed
!= USB_SPEED_SUPER
)
3675 max_burst
= urb
->ep
->ss_ep_comp
.bMaxBurst
;
3676 return DIV_ROUND_UP(total_packet_count
, max_burst
+ 1) - 1;
3680 * Returns the number of packets in the last "burst" of packets. This field is
3681 * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
3682 * the last burst packet count is equal to the total number of packets in the
3683 * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
3684 * must contain (bMaxBurst + 1) number of packets, but the last burst can
3685 * contain 1 to (bMaxBurst + 1) packets.
3687 static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd
*xhci
,
3688 struct usb_device
*udev
,
3689 struct urb
*urb
, unsigned int total_packet_count
)
3691 unsigned int max_burst
;
3692 unsigned int residue
;
3694 if (xhci
->hci_version
< 0x100)
3697 switch (udev
->speed
) {
3698 case USB_SPEED_SUPER
:
3699 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3700 max_burst
= urb
->ep
->ss_ep_comp
.bMaxBurst
;
3701 residue
= total_packet_count
% (max_burst
+ 1);
3702 /* If residue is zero, the last burst contains (max_burst + 1)
3703 * number of packets, but the TLBPC field is zero-based.
3709 if (total_packet_count
== 0)
3711 return total_packet_count
- 1;
3715 /* This is for isoc transfer */
3716 static int xhci_queue_isoc_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3717 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3719 struct xhci_ring
*ep_ring
;
3720 struct urb_priv
*urb_priv
;
3722 int num_tds
, trbs_per_td
;
3723 struct xhci_generic_trb
*start_trb
;
3726 u32 field
, length_field
;
3727 int running_total
, trb_buff_len
, td_len
, td_remain_len
, ret
;
3728 u64 start_addr
, addr
;
3730 bool more_trbs_coming
;
3731 #ifdef CONFIG_MTK_XHCI
3732 int max_packet
= USB_SPEED_HIGH
;
3735 ep_ring
= xhci
->devs
[slot_id
]->eps
[ep_index
].ring
;
3737 num_tds
= urb
->number_of_packets
;
3739 xhci_dbg(xhci
, "Isoc URB with zero packets?\n");
3743 start_addr
= (u64
) urb
->transfer_dma
;
3744 start_trb
= &ep_ring
->enqueue
->generic
;
3745 start_cycle
= ep_ring
->cycle_state
;
3747 #ifdef CONFIG_MTK_XHCI
3748 switch(urb
->dev
->speed
){
3749 case USB_SPEED_SUPER
:
3750 max_packet
= urb
->ep
->desc
.wMaxPacketSize
;
3752 case USB_SPEED_HIGH
:
3753 case USB_SPEED_FULL
:
3756 max_packet
= urb
->ep
->desc
.wMaxPacketSize
& 0x7ff;
3760 urb_priv
= urb
->hcpriv
;
3761 /* Queue the first TRB, even if it's zero-length */
3762 for (i
= 0; i
< num_tds
; i
++) {
3763 unsigned int total_packet_count
;
3764 unsigned int burst_count
;
3765 unsigned int residue
;
3769 addr
= start_addr
+ urb
->iso_frame_desc
[i
].offset
;
3770 td_len
= urb
->iso_frame_desc
[i
].length
;
3771 td_remain_len
= td_len
;
3772 total_packet_count
= DIV_ROUND_UP(td_len
,
3774 usb_endpoint_maxp(&urb
->ep
->desc
)));
3775 /* A zero-length transfer still involves at least one packet. */
3776 if (total_packet_count
== 0)
3777 total_packet_count
++;
3778 burst_count
= xhci_get_burst_count(xhci
, urb
->dev
, urb
,
3779 total_packet_count
);
3780 residue
= xhci_get_last_burst_packet_count(xhci
,
3781 urb
->dev
, urb
, total_packet_count
);
3783 trbs_per_td
= count_isoc_trbs_needed(xhci
, urb
, i
);
3785 ret
= prepare_transfer(xhci
, xhci
->devs
[slot_id
], ep_index
,
3786 urb
->stream_id
, trbs_per_td
, urb
, i
, mem_flags
);
3793 td
= urb_priv
->td
[i
];
3794 for (j
= 0; j
< trbs_per_td
; j
++) {
3799 field
= TRB_TBC(burst_count
) |
3801 /* Queue the isoc TRB */
3802 field
|= TRB_TYPE(TRB_ISOC
);
3803 /* Assume URB_ISO_ASAP is set */
3806 if (start_cycle
== 0)
3809 field
|= ep_ring
->cycle_state
;
3812 /* Queue other normal TRBs */
3813 field
|= TRB_TYPE(TRB_NORMAL
);
3814 field
|= ep_ring
->cycle_state
;
3817 /* Only set interrupt on short packet for IN EPs */
3818 if (usb_urb_dir_in(urb
))
3821 /* Chain all the TRBs together; clear the chain bit in
3822 * the last TRB to indicate it's the last TRB in the
3825 if (j
< trbs_per_td
- 1) {
3827 more_trbs_coming
= true;
3829 td
->last_trb
= ep_ring
->enqueue
;
3831 if (xhci
->hci_version
== 0x100 &&
3834 /* Set BEI bit except for the last td */
3835 if (i
< num_tds
- 1)
3838 more_trbs_coming
= false;
3841 /* Calculate TRB length */
3842 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
3843 (addr
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
3844 if (trb_buff_len
> td_remain_len
)
3845 trb_buff_len
= td_remain_len
;
3847 /* Set the TRB length, TD size, & interrupter fields. */
3848 #ifdef CONFIG_MTK_XHCI
3849 remainder
= xhci_td_remainder(urb
->transfer_buffer_length
, running_total
, max_packet
, trb_buff_len
);
3851 if (xhci
->hci_version
< 0x100) {
3852 remainder
= xhci_td_remainder(
3853 td_len
- running_total
);
3855 remainder
= xhci_v1_0_td_remainder(
3856 running_total
, trb_buff_len
,
3857 total_packet_count
, urb
,
3858 (trbs_per_td
- j
- 1));
3861 length_field
= TRB_LEN(trb_buff_len
) |
3865 queue_trb(xhci
, ep_ring
, more_trbs_coming
,
3866 lower_32_bits(addr
),
3867 upper_32_bits(addr
),
3870 running_total
+= trb_buff_len
;
3872 addr
+= trb_buff_len
;
3873 td_remain_len
-= trb_buff_len
;
3876 /* Check TD length */
3877 if (running_total
!= td_len
) {
3878 xhci_err(xhci
, "ISOC TD length unmatch\n");
3883 #ifndef CONFIG_MTK_XHCI
3884 if (xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
== 0) {
3885 if (xhci
->quirks
& XHCI_AMD_PLL_FIX
)
3886 usb_amd_quirk_pll_disable();
3889 xhci_to_hcd(xhci
)->self
.bandwidth_isoc_reqs
++;
3891 giveback_first_trb(xhci
, slot_id
, ep_index
, urb
->stream_id
,
3892 start_cycle
, start_trb
);
3895 /* Clean up a partially enqueued isoc transfer. */
3897 for (i
--; i
>= 0; i
--)
3898 list_del_init(&urb_priv
->td
[i
]->td_list
);
3900 /* Use the first TD as a temporary variable to turn the TDs we've queued
3901 * into No-ops with a software-owned cycle bit. That way the hardware
3902 * won't accidentally start executing bogus TDs when we partially
3903 * overwrite them. td->first_trb and td->start_seg are already set.
3905 urb_priv
->td
[0]->last_trb
= ep_ring
->enqueue
;
3906 /* Every TRB except the first & last will have its cycle bit flipped. */
3907 td_to_noop(xhci
, ep_ring
, urb_priv
->td
[0], true);
3909 /* Reset the ring enqueue back to the first TRB and its cycle bit. */
3910 ep_ring
->enqueue
= urb_priv
->td
[0]->first_trb
;
3911 ep_ring
->enq_seg
= urb_priv
->td
[0]->start_seg
;
3912 ep_ring
->cycle_state
= start_cycle
;
3913 ep_ring
->num_trbs_free
= ep_ring
->num_trbs_free_temp
;
3914 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb
->dev
->bus
), urb
);
3919 * Check transfer ring to guarantee there is enough room for the urb.
3920 * Update ISO URB start_frame and interval.
3921 * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
3922 * update the urb->start_frame by now.
3923 * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
3925 int xhci_queue_isoc_tx_prepare(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
3926 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
3928 struct xhci_virt_device
*xdev
;
3929 struct xhci_ring
*ep_ring
;
3930 struct xhci_ep_ctx
*ep_ctx
;
3934 int num_tds
, num_trbs
, i
;
3937 xdev
= xhci
->devs
[slot_id
];
3938 ep_ring
= xdev
->eps
[ep_index
].ring
;
3939 ep_ctx
= xhci_get_ep_ctx(xhci
, xdev
->out_ctx
, ep_index
);
3942 num_tds
= urb
->number_of_packets
;
3943 for (i
= 0; i
< num_tds
; i
++)
3944 num_trbs
+= count_isoc_trbs_needed(xhci
, urb
, i
);
3946 /* Check the ring to guarantee there is enough room for the whole urb.
3947 * Do not insert any td of the urb to the ring if the check failed.
3949 ret
= prepare_ring(xhci
, ep_ring
, le32_to_cpu(ep_ctx
->ep_info
) & EP_STATE_MASK
,
3950 num_trbs
, mem_flags
);
3954 start_frame
= xhci_readl(xhci
, &xhci
->run_regs
->microframe_index
);
3955 start_frame
&= 0x3fff;
3957 urb
->start_frame
= start_frame
;
3958 if (urb
->dev
->speed
== USB_SPEED_LOW
||
3959 urb
->dev
->speed
== USB_SPEED_FULL
)
3960 urb
->start_frame
>>= 3;
3962 xhci_interval
= EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx
->ep_info
));
3963 ep_interval
= urb
->interval
;
3964 /* Convert to microframes */
3965 if (urb
->dev
->speed
== USB_SPEED_LOW
||
3966 urb
->dev
->speed
== USB_SPEED_FULL
)
3968 /* FIXME change this to a warning and a suggestion to use the new API
3969 * to set the polling interval (once the API is added).
3971 if (xhci_interval
!= ep_interval
) {
3972 if (printk_ratelimit())
3973 dev_dbg(&urb
->dev
->dev
, "Driver uses different interval"
3974 " (%d microframe%s) than xHCI "
3975 "(%d microframe%s)\n",
3977 ep_interval
== 1 ? "" : "s",
3979 xhci_interval
== 1 ? "" : "s");
3980 urb
->interval
= xhci_interval
;
3981 /* Convert back to frames for LS/FS devices */
3982 if (urb
->dev
->speed
== USB_SPEED_LOW
||
3983 urb
->dev
->speed
== USB_SPEED_FULL
)
3986 ep_ring
->num_trbs_free_temp
= ep_ring
->num_trbs_free
;
3988 return xhci_queue_isoc_tx(xhci
, mem_flags
, urb
, slot_id
, ep_index
);
3991 /**** Command Ring Operations ****/
3993 /* Generic function for queueing a command TRB on the command ring.
3994 * Check to make sure there's room on the command ring for one command TRB.
3995 * Also check that there's room reserved for commands that must not fail.
3996 * If this is a command that must not fail, meaning command_must_succeed = TRUE,
3997 * then only check for the number of reserved spots.
3998 * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
3999 * because the command event handler may want to resubmit a failed command.
4001 static int queue_command(struct xhci_hcd
*xhci
, u32 field1
, u32 field2
,
4002 u32 field3
, u32 field4
, bool command_must_succeed
)
4004 int reserved_trbs
= xhci
->cmd_ring_reserved_trbs
;
4007 if (!command_must_succeed
)
4010 ret
= prepare_ring(xhci
, xhci
->cmd_ring
, EP_STATE_RUNNING
,
4011 reserved_trbs
, GFP_ATOMIC
);
4013 xhci_err(xhci
, "ERR: No room for command on command ring\n");
4014 if (command_must_succeed
)
4015 xhci_err(xhci
, "ERR: Reserved TRB counting for "
4016 "unfailable commands failed.\n");
4019 queue_trb(xhci
, xhci
->cmd_ring
, false, field1
, field2
, field3
,
4020 field4
| xhci
->cmd_ring
->cycle_state
);
4024 /* Queue a slot enable or disable request on the command ring */
4025 int xhci_queue_slot_control(struct xhci_hcd
*xhci
, u32 trb_type
, u32 slot_id
)
4027 return queue_command(xhci
, 0, 0, 0,
4028 TRB_TYPE(trb_type
) | SLOT_ID_FOR_TRB(slot_id
), false);
4031 /* Queue an address device command TRB */
4032 int xhci_queue_address_device(struct xhci_hcd
*xhci
, dma_addr_t in_ctx_ptr
,
4035 return queue_command(xhci
, lower_32_bits(in_ctx_ptr
),
4036 upper_32_bits(in_ctx_ptr
), 0,
4037 TRB_TYPE(TRB_ADDR_DEV
) | SLOT_ID_FOR_TRB(slot_id
),
4041 int xhci_queue_vendor_command(struct xhci_hcd
*xhci
,
4042 u32 field1
, u32 field2
, u32 field3
, u32 field4
)
4044 return queue_command(xhci
, field1
, field2
, field3
, field4
, false);
4047 /* Queue a reset device command TRB */
4048 int xhci_queue_reset_device(struct xhci_hcd
*xhci
, u32 slot_id
)
4050 return queue_command(xhci
, 0, 0, 0,
4051 TRB_TYPE(TRB_RESET_DEV
) | SLOT_ID_FOR_TRB(slot_id
),
4055 /* Queue a configure endpoint command TRB */
4056 int xhci_queue_configure_endpoint(struct xhci_hcd
*xhci
, dma_addr_t in_ctx_ptr
,
4057 u32 slot_id
, bool command_must_succeed
)
4059 return queue_command(xhci
, lower_32_bits(in_ctx_ptr
),
4060 upper_32_bits(in_ctx_ptr
), 0,
4061 TRB_TYPE(TRB_CONFIG_EP
) | SLOT_ID_FOR_TRB(slot_id
),
4062 command_must_succeed
);
4065 /* Queue an evaluate context command TRB */
4066 int xhci_queue_evaluate_context(struct xhci_hcd
*xhci
, dma_addr_t in_ctx_ptr
,
4067 u32 slot_id
, bool command_must_succeed
)
4069 return queue_command(xhci
, lower_32_bits(in_ctx_ptr
),
4070 upper_32_bits(in_ctx_ptr
), 0,
4071 TRB_TYPE(TRB_EVAL_CONTEXT
) | SLOT_ID_FOR_TRB(slot_id
),
4072 command_must_succeed
);
4076 * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
4077 * activity on an endpoint that is about to be suspended.
4079 int xhci_queue_stop_endpoint(struct xhci_hcd
*xhci
, int slot_id
,
4080 unsigned int ep_index
, int suspend
)
4082 u32 trb_slot_id
= SLOT_ID_FOR_TRB(slot_id
);
4083 u32 trb_ep_index
= EP_ID_FOR_TRB(ep_index
);
4084 u32 type
= TRB_TYPE(TRB_STOP_RING
);
4085 u32 trb_suspend
= SUSPEND_PORT_FOR_TRB(suspend
);
4087 return queue_command(xhci
, 0, 0, 0,
4088 trb_slot_id
| trb_ep_index
| type
| trb_suspend
, false);
4091 /* Set Transfer Ring Dequeue Pointer command.
4092 * This should not be used for endpoints that have streams enabled.
4094 static int queue_set_tr_deq(struct xhci_hcd
*xhci
, int slot_id
,
4095 unsigned int ep_index
, unsigned int stream_id
,
4096 struct xhci_segment
*deq_seg
,
4097 union xhci_trb
*deq_ptr
, u32 cycle_state
)
4100 u32 trb_slot_id
= SLOT_ID_FOR_TRB(slot_id
);
4101 u32 trb_ep_index
= EP_ID_FOR_TRB(ep_index
);
4102 u32 trb_stream_id
= STREAM_ID_FOR_TRB(stream_id
);
4103 u32 type
= TRB_TYPE(TRB_SET_DEQ
);
4104 struct xhci_virt_ep
*ep
;
4106 addr
= xhci_trb_virt_to_dma(deq_seg
, deq_ptr
);
4108 xhci_warn(xhci
, "WARN Cannot submit Set TR Deq Ptr\n");
4109 xhci_warn(xhci
, "WARN deq seg = %p, deq pt = %p\n",
4113 ep
= &xhci
->devs
[slot_id
]->eps
[ep_index
];
4114 if ((ep
->ep_state
& SET_DEQ_PENDING
)) {
4115 xhci_warn(xhci
, "WARN Cannot submit Set TR Deq Ptr\n");
4116 xhci_warn(xhci
, "A Set TR Deq Ptr command is pending.\n");
4119 ep
->queued_deq_seg
= deq_seg
;
4120 ep
->queued_deq_ptr
= deq_ptr
;
4121 return queue_command(xhci
, lower_32_bits(addr
) | cycle_state
,
4122 upper_32_bits(addr
), trb_stream_id
,
4123 trb_slot_id
| trb_ep_index
| type
, false);
4126 int xhci_queue_reset_ep(struct xhci_hcd
*xhci
, int slot_id
,
4127 unsigned int ep_index
)
4129 u32 trb_slot_id
= SLOT_ID_FOR_TRB(slot_id
);
4130 u32 trb_ep_index
= EP_ID_FOR_TRB(ep_index
);
4131 u32 type
= TRB_TYPE(TRB_RESET_EP
);
4133 return queue_command(xhci
, 0, 0, 0, trb_slot_id
| trb_ep_index
| type
,