drivers/uio/Kconfig

   1 menuconfig UIO
   2         tristate "Userspace I/O drivers"
   3         help
   4           Enable this to allow the userspace driver core code to be
   5           built.  This code allows userspace programs easy access to
   6           kernel interrupts and memory locations, allowing some drivers
   7           to be written in userspace.  Note that a small kernel driver
   8           is also required for interrupt handling to work properly.
   9
  10           If you don't know what to do here, say N.
  11
  12 if UIO
  13
  14 config UIO_CIF
  15         tristate "generic Hilscher CIF Card driver"
  16         depends on PCI
  17         help
  18           Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  19           driver requires a userspace component called cif that handles
  20           all of the heavy lifting and can be found at:
  21                 <http://www.osadl.org/projects/downloads/UIO/user/>
  22
  23           To compile this driver as a module, choose M here: the module
  24           will be called uio_cif.
  25
  26 config UIO_PDRV
  27         tristate "Userspace I/O platform driver"
  28         help
  29           Generic platform driver for Userspace I/O devices.
  30
  31           If you don't know what to do here, say N.
  32
  33 config UIO_PDRV_GENIRQ
  34         tristate "Userspace I/O platform driver with generic IRQ handling"
  35         help
  36           Platform driver for Userspace I/O devices, including generic
  37           interrupt handling code. Shared interrupts are not supported.
  38
  39           This kernel driver requires that the matching userspace driver
  40           handles interrupts in a special way. Userspace is responsible
  41           for acknowledging the hardware device if needed, and re-enabling
  42           interrupts in the interrupt controller using the write() syscall.
  43
  44           If you don't know what to do here, say N.
  45
  46 config UIO_DMEM_GENIRQ
  47         tristate "Userspace platform driver with generic irq and dynamic memory"
  48         depends on HAS_DMA
  49         help
  50           Platform driver for Userspace I/O devices, including generic
  51           interrupt handling code. Shared interrupts are not supported.
  52
  53           Memory regions can be specified with the same platform device
  54           resources as the UIO_PDRV drivers, but dynamic regions can also
  55           be specified.
  56           The number and size of these regions is static,
  57           but the memory allocation is not performed until
  58           the associated device file is opened. The
  59           memory is freed once the uio device is closed.
  60
  61           If you don't know what to do here, say N.
  62
  63 config UIO_AEC
  64         tristate "AEC video timestamp device"
  65         depends on PCI
  66         help
  67
  68           UIO driver for the Adrienne Electronics Corporation PCI time
  69           code device.
  70
  71           This device differs from other UIO devices since it uses I/O
  72           ports instead of memory mapped I/O. In order to make it
  73           possible for UIO to work with this device a utility, uioport,
  74           can be used to read and write the ports:
  75
  76             git clone git://ifup.org/philips/uioport.git
  77
  78           If you compile this as a module, it will be called uio_aec.
  79
  80 config UIO_SERCOS3
  81         tristate "Automata Sercos III PCI card driver"
  82         depends on PCI
  83         help
  84           Userspace I/O interface for the Sercos III PCI card from
  85           Automata GmbH. The userspace part of this driver will be
  86           available for download from the Automata GmbH web site.
  87
  88           Automata GmbH:        http://www.automataweb.com
  89           Sercos III interface: http://www.sercos.com
  90
  91           If you compile this as a module, it will be called uio_sercos3.
  92
  93 config UIO_PCI_GENERIC
  94         tristate "Generic driver for PCI 2.3 and PCI Express cards"
  95         depends on PCI
  96         help
  97           Generic driver that you can bind, dynamically, to any
  98           PCI 2.3 compliant and PCI Express card. It is useful,
  99           primarily, for virtualization scenarios.
 100           If you compile this as a module, it will be called uio_pci_generic.
 101
 102 config UIO_NETX
 103         tristate "Hilscher NetX Card driver"
 104         depends on PCI
 105         help
 106           Driver for Hilscher NetX based fieldbus cards (cifX, comX).
 107           This driver requires a userspace component that comes with the card
 108           or is available from Hilscher (http://www.hilscher.com).
 109
 110           To compile this driver as a module, choose M here; the module
 111           will be called uio_netx.
 112
 113 config UIO_PRUSS
 114         tristate "Texas Instruments PRUSS driver"
 115         depends on ARCH_DAVINCI_DA850
 116         select GENERIC_ALLOCATOR
 117         help
 118           PRUSS driver for OMAPL138/DA850/AM18XX devices
 119           PRUSS driver requires user space components, examples and user space
 120           driver is available from below SVN repo - you may use anonymous login
 121
 122           https://gforge.ti.com/gf/project/pru_sw/
 123
 124           More info on API is available at below wiki
 125
 126           http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 127
 128           To compile this driver as a module, choose M here: the module
 129           will be called uio_pruss.
 130
 131 endif