projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / staging / comedi / drivers / dt9812.c
1 /*
2 * comedi/drivers/dt9812.c
3 * COMEDI driver for DataTranslation DT9812 USB module
4 *
5 * Copyright (C) 2005 Anders Blomdell <anders.blomdell@control.lth.se>
6 *
7 * COMEDI - Linux Control and Measurement Device Interface
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 */
24
25 /*
26 Driver: dt9812
27 Description: Data Translation DT9812 USB module
28 Author: anders.blomdell@control.lth.se (Anders Blomdell)
29 Status: in development
30 Devices: [Data Translation] DT9812 (dt9812)
31 Updated: Sun Nov 20 20:18:34 EST 2005
32
33 This driver works, but bulk transfers not implemented. Might be a starting point
34 for someone else. I found out too late that USB has too high latencies (>1 ms)
35 for my needs.
36 */
37
38 /*
39 * Nota Bene:
40 * 1. All writes to command pipe has to be 32 bytes (ISP1181B SHRTP=0 ?)
41 * 2. The DDK source (as of sep 2005) is in error regarding the
42 * input MUX bits (example code says P4, but firmware schematics
43 * says P1).
44 */
45
46 #include <linux/kernel.h>
47 #include <linux/errno.h>
48 #include <linux/init.h>
49 #include <linux/slab.h>
50 #include <linux/module.h>
51 #include <linux/kref.h>
52 #include <linux/uaccess.h>
53 #include <linux/usb.h>
54
55 #include "../comedidev.h"
56
57 #define DT9812_DIAGS_BOARD_INFO_ADDR 0xFBFF
58 #define DT9812_MAX_WRITE_CMD_PIPE_SIZE 32
59 #define DT9812_MAX_READ_CMD_PIPE_SIZE 32
60
61 /*
62 * See Silican Laboratories C8051F020/1/2/3 manual
63 */
64 #define F020_SFR_P4 0x84
65 #define F020_SFR_P1 0x90
66 #define F020_SFR_P2 0xa0
67 #define F020_SFR_P3 0xb0
68 #define F020_SFR_AMX0CF 0xba
69 #define F020_SFR_AMX0SL 0xbb
70 #define F020_SFR_ADC0CF 0xbc
71 #define F020_SFR_ADC0L 0xbe
72 #define F020_SFR_ADC0H 0xbf
73 #define F020_SFR_DAC0L 0xd2
74 #define F020_SFR_DAC0H 0xd3
75 #define F020_SFR_DAC0CN 0xd4
76 #define F020_SFR_DAC1L 0xd5
77 #define F020_SFR_DAC1H 0xd6
78 #define F020_SFR_DAC1CN 0xd7
79 #define F020_SFR_ADC0CN 0xe8
80
81 #define F020_MASK_ADC0CF_AMP0GN0 0x01
82 #define F020_MASK_ADC0CF_AMP0GN1 0x02
83 #define F020_MASK_ADC0CF_AMP0GN2 0x04
84
85 #define F020_MASK_ADC0CN_AD0EN 0x80
86 #define F020_MASK_ADC0CN_AD0INT 0x20
87 #define F020_MASK_ADC0CN_AD0BUSY 0x10
88
89 #define F020_MASK_DACxCN_DACxEN 0x80
90
91 enum {
92 /* A/D D/A DI DO CT */
93 DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */
94 DT9812_DEVID_DT9812_2PT5, /* 8 2 8 8 1 0-2.44V */
95 #if 0
96 DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */
97 DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */
98 #endif
99 };
100
101 enum dt9812_gain {
102 DT9812_GAIN_0PT25 = 1,
103 DT9812_GAIN_0PT5 = 2,
104 DT9812_GAIN_1 = 4,
105 DT9812_GAIN_2 = 8,
106 DT9812_GAIN_4 = 16,
107 DT9812_GAIN_8 = 32,
108 DT9812_GAIN_16 = 64,
109 };
110
111 enum {
112 DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0,
113 /* Write Flash memory */
114 DT9812_W_FLASH_DATA = 0,
115 /* Read Flash memory misc config info */
116 DT9812_R_FLASH_DATA = 1,
117
118 /*
119 * Register read/write commands for processor
120 */
121
122 /* Read a single byte of USB memory */
123 DT9812_R_SINGLE_BYTE_REG = 2,
124 /* Write a single byte of USB memory */
125 DT9812_W_SINGLE_BYTE_REG = 3,
126 /* Multiple Reads of USB memory */
127 DT9812_R_MULTI_BYTE_REG = 4,
128 /* Multiple Writes of USB memory */
129 DT9812_W_MULTI_BYTE_REG = 5,
130 /* Read, (AND) with mask, OR value, then write (single) */
131 DT9812_RMW_SINGLE_BYTE_REG = 6,
132 /* Read, (AND) with mask, OR value, then write (multiple) */
133 DT9812_RMW_MULTI_BYTE_REG = 7,
134
135 /*
136 * Register read/write commands for SMBus
137 */
138
139 /* Read a single byte of SMBus */
140 DT9812_R_SINGLE_BYTE_SMBUS = 8,
141 /* Write a single byte of SMBus */
142 DT9812_W_SINGLE_BYTE_SMBUS = 9,
143 /* Multiple Reads of SMBus */
144 DT9812_R_MULTI_BYTE_SMBUS = 10,
145 /* Multiple Writes of SMBus */
146 DT9812_W_MULTI_BYTE_SMBUS = 11,
147
148 /*
149 * Register read/write commands for a device
150 */
151
152 /* Read a single byte of a device */
153 DT9812_R_SINGLE_BYTE_DEV = 12,
154 /* Write a single byte of a device */
155 DT9812_W_SINGLE_BYTE_DEV = 13,
156 /* Multiple Reads of a device */
157 DT9812_R_MULTI_BYTE_DEV = 14,
158 /* Multiple Writes of a device */
159 DT9812_W_MULTI_BYTE_DEV = 15,
160
161 /* Not sure if we'll need this */
162 DT9812_W_DAC_THRESHOLD = 16,
163
164 /* Set interrupt on change mask */
165 DT9812_W_INT_ON_CHANGE_MASK = 17,
166
167 /* Write (or Clear) the CGL for the ADC */
168 DT9812_W_CGL = 18,
169 /* Multiple Reads of USB memory */
170 DT9812_R_MULTI_BYTE_USBMEM = 19,
171 /* Multiple Writes to USB memory */
172 DT9812_W_MULTI_BYTE_USBMEM = 20,
173
174 /* Issue a start command to a given subsystem */
175 DT9812_START_SUBSYSTEM = 21,
176 /* Issue a stop command to a given subsystem */
177 DT9812_STOP_SUBSYSTEM = 22,
178
179 /* calibrate the board using CAL_POT_CMD */
180 DT9812_CALIBRATE_POT = 23,
181 /* set the DAC FIFO size */
182 DT9812_W_DAC_FIFO_SIZE = 24,
183 /* Write or Clear the CGL for the DAC */
184 DT9812_W_CGL_DAC = 25,
185 /* Read a single value from a subsystem */
186 DT9812_R_SINGLE_VALUE_CMD = 26,
187 /* Write a single value to a subsystem */
188 DT9812_W_SINGLE_VALUE_CMD = 27,
189 /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */
190 DT9812_MAX_USB_FIRMWARE_CMD_CODE,
191 };
192
193 struct dt9812_flash_data {
194 u16 numbytes;
195 u16 address;
196 };
197
198 #define DT9812_MAX_NUM_MULTI_BYTE_RDS \
199 ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
200
201 struct dt9812_read_multi {
202 u8 count;
203 u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS];
204 };
205
206 struct dt9812_write_byte {
207 u8 address;
208 u8 value;
209 };
210
211 #define DT9812_MAX_NUM_MULTI_BYTE_WRTS \
212 ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
213 sizeof(struct dt9812_write_byte))
214
215 struct dt9812_write_multi {
216 u8 count;
217 struct dt9812_write_byte write[DT9812_MAX_NUM_MULTI_BYTE_WRTS];
218 };
219
220 struct dt9812_rmw_byte {
221 u8 address;
222 u8 and_mask;
223 u8 or_value;
224 };
225
226 #define DT9812_MAX_NUM_MULTI_BYTE_RMWS \
227 ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(struct dt9812_rmw_byte))
228
229 struct dt9812_rmw_multi {
230 u8 count;
231 struct dt9812_rmw_byte rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS];
232 };
233
234 struct dt9812_usb_cmd {
235 u32 cmd;
236 union {
237 struct dt9812_flash_data flash_data_info;
238 struct dt9812_read_multi read_multi_info;
239 struct dt9812_write_multi write_multi_info;
240 struct dt9812_rmw_multi rmw_multi_info;
241 } u;
242 #if 0
243 WRITE_BYTE_INFO WriteByteInfo;
244 READ_BYTE_INFO ReadByteInfo;
245 WRITE_MULTI_INFO WriteMultiInfo;
246 READ_MULTI_INFO ReadMultiInfo;
247 RMW_BYTE_INFO RMWByteInfo;
248 RMW_MULTI_INFO RMWMultiInfo;
249 DAC_THRESHOLD_INFO DacThresholdInfo;
250 INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo;
251 CGL_INFO CglInfo;
252 SUBSYSTEM_INFO SubsystemInfo;
253 CAL_POT_CMD CalPotCmd;
254 WRITE_DEV_BYTE_INFO WriteDevByteInfo;
255 READ_DEV_BYTE_INFO ReadDevByteInfo;
256 WRITE_DEV_MULTI_INFO WriteDevMultiInfo;
257 READ_DEV_MULTI_INFO ReadDevMultiInfo;
258 READ_SINGLE_VALUE_INFO ReadSingleValueInfo;
259 WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo;
260 #endif
261 };
262
263 #define DT9812_NUM_SLOTS 16
264
265 static DEFINE_SEMAPHORE(dt9812_mutex);
266
267 static const struct usb_device_id dt9812_table[] = {
268 {USB_DEVICE(0x0867, 0x9812)},
269 {} /* Terminating entry */
270 };
271
272 MODULE_DEVICE_TABLE(usb, dt9812_table);
273
274 struct usb_dt9812 {
275 struct slot_dt9812 *slot;
276 struct usb_device *udev;
277 struct usb_interface *interface;
278 u16 vendor;
279 u16 product;
280 u16 device;
281 u32 serial;
282 struct {
283 __u8 addr;
284 size_t size;
285 } message_pipe, command_write, command_read, write_stream, read_stream;
286 struct kref kref;
287 u16 analog_out_shadow[2];
288 u8 digital_out_shadow;
289 };
290
291 struct comedi_dt9812 {
292 struct slot_dt9812 *slot;
293 u32 serial;
294 };
295
296 struct slot_dt9812 {
297 struct semaphore mutex;
298 u32 serial;
299 struct usb_dt9812 *usb;
300 struct comedi_dt9812 *comedi;
301 };
302
303 static const struct comedi_lrange dt9812_10_ain_range = { 1, {
304 BIP_RANGE(10),
305 }
306 };
307
308 static const struct comedi_lrange dt9812_2pt5_ain_range = { 1, {
309 UNI_RANGE(2.5),
310 }
311 };
312
313 static const struct comedi_lrange dt9812_10_aout_range = { 1, {
314 BIP_RANGE(10),
315 }
316 };
317
318 static const struct comedi_lrange dt9812_2pt5_aout_range = { 1, {
319 UNI_RANGE(2.5),
320 }
321 };
322
323 static struct slot_dt9812 dt9812[DT9812_NUM_SLOTS];
324
325 /* Useful shorthand access to private data */
326 #define devpriv ((struct comedi_dt9812 *)dev->private)
327
328 static inline struct usb_dt9812 *to_dt9812_dev(struct kref *d)
329 {
330 return container_of(d, struct usb_dt9812, kref);
331 }
332
333 static void dt9812_delete(struct kref *kref)
334 {
335 struct usb_dt9812 *dev = to_dt9812_dev(kref);
336
337 usb_put_dev(dev->udev);
338 kfree(dev);
339 }
340
341 static int dt9812_read_info(struct usb_dt9812 *dev, int offset, void *buf,
342 size_t buf_size)
343 {
344 struct dt9812_usb_cmd cmd;
345 int count, retval;
346
347 cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
348 cmd.u.flash_data_info.address =
349 cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset);
350 cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size);
351
352 /* DT9812 only responds to 32 byte writes!! */
353 count = 32;
354 retval = usb_bulk_msg(dev->udev,
355 usb_sndbulkpipe(dev->udev,
356 dev->command_write.addr),
357 &cmd, 32, &count, HZ * 1);
358 if (retval)
359 return retval;
360 retval = usb_bulk_msg(dev->udev,
361 usb_rcvbulkpipe(dev->udev,
362 dev->command_read.addr),
363 buf, buf_size, &count, HZ * 1);
364 return retval;
365 }
366
367 static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
368 u8 * address, u8 * value)
369 {
370 struct dt9812_usb_cmd cmd;
371 int i, count, retval;
372
373 cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
374 cmd.u.read_multi_info.count = reg_count;
375 for (i = 0; i < reg_count; i++)
376 cmd.u.read_multi_info.address[i] = address[i];
377
378 /* DT9812 only responds to 32 byte writes!! */
379 count = 32;
380 retval = usb_bulk_msg(dev->udev,
381 usb_sndbulkpipe(dev->udev,
382 dev->command_write.addr),
383 &cmd, 32, &count, HZ * 1);
384 if (retval)
385 return retval;
386 retval = usb_bulk_msg(dev->udev,
387 usb_rcvbulkpipe(dev->udev,
388 dev->command_read.addr),
389 value, reg_count, &count, HZ * 1);
390 return retval;
391 }
392
393 static int dt9812_write_multiple_registers(struct usb_dt9812 *dev,
394 int reg_count, u8 * address,
395 u8 * value)
396 {
397 struct dt9812_usb_cmd cmd;
398 int i, count, retval;
399
400 cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
401 cmd.u.read_multi_info.count = reg_count;
402 for (i = 0; i < reg_count; i++) {
403 cmd.u.write_multi_info.write[i].address = address[i];
404 cmd.u.write_multi_info.write[i].value = value[i];
405 }
406 /* DT9812 only responds to 32 byte writes!! */
407 retval = usb_bulk_msg(dev->udev,
408 usb_sndbulkpipe(dev->udev,
409 dev->command_write.addr),
410 &cmd, 32, &count, HZ * 1);
411 return retval;
412 }
413
414 static int dt9812_rmw_multiple_registers(struct usb_dt9812 *dev, int reg_count,
415 struct dt9812_rmw_byte *rmw)
416 {
417 struct dt9812_usb_cmd cmd;
418 int i, count, retval;
419
420 cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
421 cmd.u.rmw_multi_info.count = reg_count;
422 for (i = 0; i < reg_count; i++)
423 cmd.u.rmw_multi_info.rmw[i] = rmw[i];
424
425 /* DT9812 only responds to 32 byte writes!! */
426 retval = usb_bulk_msg(dev->udev,
427 usb_sndbulkpipe(dev->udev,
428 dev->command_write.addr),
429 &cmd, 32, &count, HZ * 1);
430 return retval;
431 }
432
433 static int dt9812_digital_in(struct slot_dt9812 *slot, u8 * bits)
434 {
435 int result = -ENODEV;
436
437 down(&slot->mutex);
438 if (slot->usb) {
439 u8 reg[2] = { F020_SFR_P3, F020_SFR_P1 };
440 u8 value[2];
441
442 result = dt9812_read_multiple_registers(slot->usb, 2, reg,
443 value);
444 if (result == 0) {
445 /*
446 * bits 0-6 in F020_SFR_P3 are bits 0-6 in the digital
447 * input port bit 3 in F020_SFR_P1 is bit 7 in the
448 * digital input port
449 */
450 *bits = (value[0] & 0x7f) | ((value[1] & 0x08) << 4);
451 /* printk("%2.2x, %2.2x -> %2.2x\n",
452 value[0], value[1], *bits); */
453 }
454 }
455 up(&slot->mutex);
456
457 return result;
458 }
459
460 static int dt9812_digital_out(struct slot_dt9812 *slot, u8 bits)
461 {
462 int result = -ENODEV;
463
464 down(&slot->mutex);
465 if (slot->usb) {
466 u8 reg[1];
467 u8 value[1];
468
469 reg[0] = F020_SFR_P2;
470 value[0] = bits;
471 result = dt9812_write_multiple_registers(slot->usb, 1, reg,
472 value);
473 slot->usb->digital_out_shadow = bits;
474 }
475 up(&slot->mutex);
476 return result;
477 }
478
479 static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 * bits)
480 {
481 int result = -ENODEV;
482
483 down(&slot->mutex);
484 if (slot->usb) {
485 *bits = slot->usb->digital_out_shadow;
486 result = 0;
487 }
488 up(&slot->mutex);
489 return result;
490 }
491
492 static void dt9812_configure_mux(struct usb_dt9812 *dev,
493 struct dt9812_rmw_byte *rmw, int channel)
494 {
495 if (dev->device == DT9812_DEVID_DT9812_10) {
496 /* In the DT9812/10V MUX is selected by P1.5-7 */
497 rmw->address = F020_SFR_P1;
498 rmw->and_mask = 0xe0;
499 rmw->or_value = channel << 5;
500 } else {
501 /* In the DT9812/2.5V, internal mux is selected by bits 0:2 */
502 rmw->address = F020_SFR_AMX0SL;
503 rmw->and_mask = 0xff;
504 rmw->or_value = channel & 0x07;
505 }
506 }
507
508 static void dt9812_configure_gain(struct usb_dt9812 *dev,
509 struct dt9812_rmw_byte *rmw,
510 enum dt9812_gain gain)
511 {
512 if (dev->device == DT9812_DEVID_DT9812_10) {
513 /* In the DT9812/10V, there is an external gain of 0.5 */
514 gain <<= 1;
515 }
516
517 rmw->address = F020_SFR_ADC0CF;
518 rmw->and_mask = F020_MASK_ADC0CF_AMP0GN2 |
519 F020_MASK_ADC0CF_AMP0GN1 | F020_MASK_ADC0CF_AMP0GN0;
520 switch (gain) {
521 /*
522 * 000 -> Gain = 1
523 * 001 -> Gain = 2
524 * 010 -> Gain = 4
525 * 011 -> Gain = 8
526 * 10x -> Gain = 16
527 * 11x -> Gain = 0.5
528 */
529 case DT9812_GAIN_0PT5:
530 rmw->or_value = F020_MASK_ADC0CF_AMP0GN2 ||
531 F020_MASK_ADC0CF_AMP0GN1;
532 break;
533 case DT9812_GAIN_1:
534 rmw->or_value = 0x00;
535 break;
536 case DT9812_GAIN_2:
537 rmw->or_value = F020_MASK_ADC0CF_AMP0GN0;
538 break;
539 case DT9812_GAIN_4:
540 rmw->or_value = F020_MASK_ADC0CF_AMP0GN1;
541 break;
542 case DT9812_GAIN_8:
543 rmw->or_value = F020_MASK_ADC0CF_AMP0GN1 ||
544 F020_MASK_ADC0CF_AMP0GN0;
545 break;
546 case DT9812_GAIN_16:
547 rmw->or_value = F020_MASK_ADC0CF_AMP0GN2;
548 break;
549 default:
550 err("Illegal gain %d\n", gain);
551
552 }
553 }
554
555 static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 * value,
556 enum dt9812_gain gain)
557 {
558 struct dt9812_rmw_byte rmw[3];
559 u8 reg[3] = {
560 F020_SFR_ADC0CN,
561 F020_SFR_ADC0H,
562 F020_SFR_ADC0L
563 };
564 u8 val[3];
565 int result = -ENODEV;
566
567 down(&slot->mutex);
568 if (!slot->usb)
569 goto exit;
570
571 /* 1 select the gain */
572 dt9812_configure_gain(slot->usb, &rmw[0], gain);
573
574 /* 2 set the MUX to select the channel */
575 dt9812_configure_mux(slot->usb, &rmw[1], channel);
576
577 /* 3 start conversion */
578 rmw[2].address = F020_SFR_ADC0CN;
579 rmw[2].and_mask = 0xff;
580 rmw[2].or_value = F020_MASK_ADC0CN_AD0EN | F020_MASK_ADC0CN_AD0BUSY;
581
582 result = dt9812_rmw_multiple_registers(slot->usb, 3, rmw);
583 if (result)
584 goto exit;
585
586 /* read the status and ADC */
587 result = dt9812_read_multiple_registers(slot->usb, 3, reg, val);
588 if (result)
589 goto exit;
590 /*
591 * An ADC conversion takes 16 SAR clocks cycles, i.e. about 9us.
592 * Therefore, between the instant that AD0BUSY was set via
593 * dt9812_rmw_multiple_registers and the read of AD0BUSY via
594 * dt9812_read_multiple_registers, the conversion should be complete
595 * since these two operations require two USB transactions each taking
596 * at least a millisecond to complete. However, lets make sure that
597 * conversion is finished.
598 */
599 if ((val[0] & (F020_MASK_ADC0CN_AD0INT | F020_MASK_ADC0CN_AD0BUSY)) ==
600 F020_MASK_ADC0CN_AD0INT) {
601 switch (slot->usb->device) {
602 case DT9812_DEVID_DT9812_10:
603 /*
604 * For DT9812-10V the personality module set the
605 * encoding to 2's complement. Hence, convert it before
606 * returning it
607 */
608 *value = ((val[1] << 8) | val[2]) + 0x800;
609 break;
610 case DT9812_DEVID_DT9812_2PT5:
611 *value = (val[1] << 8) | val[2];
612 break;
613 }
614 }
615
616 exit:
617 up(&slot->mutex);
618 return result;
619 }
620
621 static int dt9812_analog_out_shadow(struct slot_dt9812 *slot, int channel,
622 u16 * value)
623 {
624 int result = -ENODEV;
625
626 down(&slot->mutex);
627 if (slot->usb) {
628 *value = slot->usb->analog_out_shadow[channel];
629 result = 0;
630 }
631 up(&slot->mutex);
632
633 return result;
634 }
635
636 static int dt9812_analog_out(struct slot_dt9812 *slot, int channel, u16 value)
637 {
638 int result = -ENODEV;
639
640 down(&slot->mutex);
641 if (slot->usb) {
642 struct dt9812_rmw_byte rmw[3];
643
644 switch (channel) {
645 case 0:
646 /* 1. Set DAC mode */
647 rmw[0].address = F020_SFR_DAC0CN;
648 rmw[0].and_mask = 0xff;
649 rmw[0].or_value = F020_MASK_DACxCN_DACxEN;
650
651 /* 2 load low byte of DAC value first */
652 rmw[1].address = F020_SFR_DAC0L;
653 rmw[1].and_mask = 0xff;
654 rmw[1].or_value = value & 0xff;
655
656 /* 3 load high byte of DAC value next to latch the
657 12-bit value */
658 rmw[2].address = F020_SFR_DAC0H;
659 rmw[2].and_mask = 0xff;
660 rmw[2].or_value = (value >> 8) & 0xf;
661 break;
662
663 case 1:
664 /* 1. Set DAC mode */
665 rmw[0].address = F020_SFR_DAC1CN;
666 rmw[0].and_mask = 0xff;
667 rmw[0].or_value = F020_MASK_DACxCN_DACxEN;
668
669 /* 2 load low byte of DAC value first */
670 rmw[1].address = F020_SFR_DAC1L;
671 rmw[1].and_mask = 0xff;
672 rmw[1].or_value = value & 0xff;
673
674 /* 3 load high byte of DAC value next to latch the
675 12-bit value */
676 rmw[2].address = F020_SFR_DAC1H;
677 rmw[2].and_mask = 0xff;
678 rmw[2].or_value = (value >> 8) & 0xf;
679 break;
680 }
681 result = dt9812_rmw_multiple_registers(slot->usb, 3, rmw);
682 slot->usb->analog_out_shadow[channel] = value;
683 }
684 up(&slot->mutex);
685
686 return result;
687 }
688
689 /*
690 * USB framework functions
691 */
692
693 static int dt9812_probe(struct usb_interface *interface,
694 const struct usb_device_id *id)
695 {
696 int retval = -ENOMEM;
697 struct usb_dt9812 *dev = NULL;
698 struct usb_host_interface *iface_desc;
699 struct usb_endpoint_descriptor *endpoint;
700 int i;
701 u8 fw;
702
703 /* allocate memory for our device state and initialize it */
704 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
705 if (dev == NULL) {
706 dev_err(&interface->dev, "Out of memory\n");
707 goto error;
708 }
709 kref_init(&dev->kref);
710
711 dev->udev = usb_get_dev(interface_to_usbdev(interface));
712 dev->interface = interface;
713
714 /* Check endpoints */
715 iface_desc = interface->cur_altsetting;
716
717 if (iface_desc->desc.bNumEndpoints != 5) {
718 err("Wrong number of endpints.");
719 retval = -ENODEV;
720 goto error;
721 }
722
723 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
724 int direction = -1;
725 endpoint = &iface_desc->endpoint[i].desc;
726 switch (i) {
727 case 0:
728 direction = USB_DIR_IN;
729 dev->message_pipe.addr = endpoint->bEndpointAddress;
730 dev->message_pipe.size =
731 le16_to_cpu(endpoint->wMaxPacketSize);
732
733 break;
734 case 1:
735 direction = USB_DIR_OUT;
736 dev->command_write.addr = endpoint->bEndpointAddress;
737 dev->command_write.size =
738 le16_to_cpu(endpoint->wMaxPacketSize);
739 break;
740 case 2:
741 direction = USB_DIR_IN;
742 dev->command_read.addr = endpoint->bEndpointAddress;
743 dev->command_read.size =
744 le16_to_cpu(endpoint->wMaxPacketSize);
745 break;
746 case 3:
747 direction = USB_DIR_OUT;
748 dev->write_stream.addr = endpoint->bEndpointAddress;
749 dev->write_stream.size =
750 le16_to_cpu(endpoint->wMaxPacketSize);
751 break;
752 case 4:
753 direction = USB_DIR_IN;
754 dev->read_stream.addr = endpoint->bEndpointAddress;
755 dev->read_stream.size =
756 le16_to_cpu(endpoint->wMaxPacketSize);
757 break;
758 }
759 if ((endpoint->bEndpointAddress & USB_DIR_IN) != direction) {
760 dev_err(&interface->dev,
761 "Endpoint has wrong direction.\n");
762 retval = -ENODEV;
763 goto error;
764 }
765 }
766 if (dt9812_read_info(dev, 0, &fw, sizeof(fw)) != 0) {
767 /*
768 * Seems like a configuration reset is necessary if driver is
769 * reloaded while device is attached
770 */
771 usb_reset_configuration(dev->udev);
772 for (i = 0; i < 10; i++) {
773 retval = dt9812_read_info(dev, 1, &fw, sizeof(fw));
774 if (retval == 0) {
775 dev_info(&interface->dev,
776 "usb_reset_configuration succeded "
777 "after %d iterations\n", i);
778 break;
779 }
780 }
781 }
782
783 if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) {
784 err("Failed to read vendor.");
785 retval = -ENODEV;
786 goto error;
787 }
788 if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) {
789 err("Failed to read product.");
790 retval = -ENODEV;
791 goto error;
792 }
793 if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) {
794 err("Failed to read device.");
795 retval = -ENODEV;
796 goto error;
797 }
798 if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) {
799 err("Failed to read serial.");
800 retval = -ENODEV;
801 goto error;
802 }
803
804 dev->vendor = le16_to_cpu(dev->vendor);
805 dev->product = le16_to_cpu(dev->product);
806 dev->device = le16_to_cpu(dev->device);
807 dev->serial = le32_to_cpu(dev->serial);
808 switch (dev->device) {
809 case DT9812_DEVID_DT9812_10:
810 dev->analog_out_shadow[0] = 0x0800;
811 dev->analog_out_shadow[1] = 0x800;
812 break;
813 case DT9812_DEVID_DT9812_2PT5:
814 dev->analog_out_shadow[0] = 0x0000;
815 dev->analog_out_shadow[1] = 0x0000;
816 break;
817 }
818 dev->digital_out_shadow = 0;
819
820 /* save our data pointer in this interface device */
821 usb_set_intfdata(interface, dev);
822
823 /* let the user know what node this device is now attached to */
824 dev_info(&interface->dev, "USB DT9812 (%4.4x.%4.4x.%4.4x) #0x%8.8x\n",
825 dev->vendor, dev->product, dev->device, dev->serial);
826
827 down(&dt9812_mutex);
828 {
829 /* Find a slot for the USB device */
830 struct slot_dt9812 *first = NULL;
831 struct slot_dt9812 *best = NULL;
832
833 for (i = 0; i < DT9812_NUM_SLOTS; i++) {
834 if (!first && !dt9812[i].usb && dt9812[i].serial == 0)
835 first = &dt9812[i];
836 if (!best && dt9812[i].serial == dev->serial)
837 best = &dt9812[i];
838 }
839
840 if (!best)
841 best = first;
842
843 if (best) {
844 down(&best->mutex);
845 best->usb = dev;
846 dev->slot = best;
847 up(&best->mutex);
848 }
849 }
850 up(&dt9812_mutex);
851
852 return 0;
853
854 error:
855 if (dev)
856 kref_put(&dev->kref, dt9812_delete);
857 return retval;
858 }
859
860 static void dt9812_disconnect(struct usb_interface *interface)
861 {
862 struct usb_dt9812 *dev;
863 int minor = interface->minor;
864
865 down(&dt9812_mutex);
866 dev = usb_get_intfdata(interface);
867 if (dev->slot) {
868 down(&dev->slot->mutex);
869 dev->slot->usb = NULL;
870 up(&dev->slot->mutex);
871 dev->slot = NULL;
872 }
873 usb_set_intfdata(interface, NULL);
874 up(&dt9812_mutex);
875
876 /* queue final destruction */
877 kref_put(&dev->kref, dt9812_delete);
878
879 dev_info(&interface->dev, "USB Dt9812 #%d now disconnected\n", minor);
880 }
881
882 static struct usb_driver dt9812_usb_driver = {
883 .name = "dt9812",
884 .probe = dt9812_probe,
885 .disconnect = dt9812_disconnect,
886 .id_table = dt9812_table,
887 };
888
889 /*
890 * Comedi functions
891 */
892
893 static int dt9812_comedi_open(struct comedi_device *dev)
894 {
895 int result = -ENODEV;
896
897 down(&devpriv->slot->mutex);
898 if (devpriv->slot->usb) {
899 /* We have an attached device, fill in current range info */
900 struct comedi_subdevice *s;
901
902 s = &dev->subdevices[0];
903 s->n_chan = 8;
904 s->maxdata = 1;
905
906 s = &dev->subdevices[1];
907 s->n_chan = 8;
908 s->maxdata = 1;
909
910 s = &dev->subdevices[2];
911 s->n_chan = 8;
912 switch (devpriv->slot->usb->device) {
913 case 0:{
914 s->maxdata = 4095;
915 s->range_table = &dt9812_10_ain_range;
916 }
917 break;
918 case 1:{
919 s->maxdata = 4095;
920 s->range_table = &dt9812_2pt5_ain_range;
921 }
922 break;
923 }
924
925 s = &dev->subdevices[3];
926 s->n_chan = 2;
927 switch (devpriv->slot->usb->device) {
928 case 0:{
929 s->maxdata = 4095;
930 s->range_table = &dt9812_10_aout_range;
931 }
932 break;
933 case 1:{
934 s->maxdata = 4095;
935 s->range_table = &dt9812_2pt5_aout_range;
936 }
937 break;
938 }
939 result = 0;
940 }
941 up(&devpriv->slot->mutex);
942 return result;
943 }
944
945 static int dt9812_di_rinsn(struct comedi_device *dev,
946 struct comedi_subdevice *s, struct comedi_insn *insn,
947 unsigned int *data)
948 {
949 int n;
950 u8 bits = 0;
951
952 dt9812_digital_in(devpriv->slot, &bits);
953 for (n = 0; n < insn->n; n++)
954 data[n] = ((1 << insn->chanspec) & bits) != 0;
955 return n;
956 }
957
958 static int dt9812_do_winsn(struct comedi_device *dev,
959 struct comedi_subdevice *s, struct comedi_insn *insn,
960 unsigned int *data)
961 {
962 int n;
963 u8 bits = 0;
964
965 dt9812_digital_out_shadow(devpriv->slot, &bits);
966 for (n = 0; n < insn->n; n++) {
967 u8 mask = 1 << insn->chanspec;
968
969 bits &= ~mask;
970 if (data[n])
971 bits |= mask;
972 }
973 dt9812_digital_out(devpriv->slot, bits);
974 return n;
975 }
976
977 static int dt9812_ai_rinsn(struct comedi_device *dev,
978 struct comedi_subdevice *s, struct comedi_insn *insn,
979 unsigned int *data)
980 {
981 int n;
982
983 for (n = 0; n < insn->n; n++) {
984 u16 value = 0;
985
986 dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
987 DT9812_GAIN_1);
988 data[n] = value;
989 }
990 return n;
991 }
992
993 static int dt9812_ao_rinsn(struct comedi_device *dev,
994 struct comedi_subdevice *s, struct comedi_insn *insn,
995 unsigned int *data)
996 {
997 int n;
998 u16 value;
999
1000 for (n = 0; n < insn->n; n++) {
1001 value = 0;
1002 dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
1003 data[n] = value;
1004 }
1005 return n;
1006 }
1007
1008 static int dt9812_ao_winsn(struct comedi_device *dev,
1009 struct comedi_subdevice *s, struct comedi_insn *insn,
1010 unsigned int *data)
1011 {
1012 int n;
1013
1014 for (n = 0; n < insn->n; n++)
1015 dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
1016 return n;
1017 }
1018
1019 static int dt9812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
1020 {
1021 int i;
1022 struct comedi_subdevice *s;
1023
1024 dev->board_name = "dt9812";
1025
1026 if (alloc_private(dev, sizeof(struct comedi_dt9812)) < 0)
1027 return -ENOMEM;
1028
1029 /*
1030 * Special open routine, since USB unit may be unattached at
1031 * comedi_config time, hence range can not be determined
1032 */
1033 dev->open = dt9812_comedi_open;
1034
1035 devpriv->serial = it->options[0];
1036
1037 /* Allocate subdevices */
1038 if (alloc_subdevices(dev, 4) < 0)
1039 return -ENOMEM;
1040
1041 /* digital input subdevice */
1042 s = dev->subdevices + 0;
1043 s->type = COMEDI_SUBD_DI;
1044 s->subdev_flags = SDF_READABLE;
1045 s->n_chan = 0;
1046 s->maxdata = 1;
1047 s->range_table = &range_digital;
1048 s->insn_read = &dt9812_di_rinsn;
1049
1050 /* digital output subdevice */
1051 s = dev->subdevices + 1;
1052 s->type = COMEDI_SUBD_DO;
1053 s->subdev_flags = SDF_WRITEABLE;
1054 s->n_chan = 0;
1055 s->maxdata = 1;
1056 s->range_table = &range_digital;
1057 s->insn_write = &dt9812_do_winsn;
1058
1059 /* analog input subdevice */
1060 s = dev->subdevices + 2;
1061 s->type = COMEDI_SUBD_AI;
1062 s->subdev_flags = SDF_READABLE | SDF_GROUND;
1063 s->n_chan = 0;
1064 s->maxdata = 1;
1065 s->range_table = NULL;
1066 s->insn_read = &dt9812_ai_rinsn;
1067
1068 /* analog output subdevice */
1069 s = dev->subdevices + 3;
1070 s->type = COMEDI_SUBD_AO;
1071 s->subdev_flags = SDF_WRITEABLE;
1072 s->n_chan = 0;
1073 s->maxdata = 1;
1074 s->range_table = NULL;
1075 s->insn_write = &dt9812_ao_winsn;
1076 s->insn_read = &dt9812_ao_rinsn;
1077
1078 printk(KERN_INFO "comedi%d: successfully attached to dt9812.\n",
1079 dev->minor);
1080
1081 down(&dt9812_mutex);
1082 /* Find a slot for the comedi device */
1083 {
1084 struct slot_dt9812 *first = NULL;
1085 struct slot_dt9812 *best = NULL;
1086 for (i = 0; i < DT9812_NUM_SLOTS; i++) {
1087 if (!first && !dt9812[i].comedi) {
1088 /* First free slot from comedi side */
1089 first = &dt9812[i];
1090 }
1091 if (!best &&
1092 dt9812[i].usb &&
1093 dt9812[i].usb->serial == devpriv->serial) {
1094 /* We have an attaced device with matching ID */
1095 best = &dt9812[i];
1096 }
1097 }
1098 if (!best)
1099 best = first;
1100 if (best) {
1101 down(&best->mutex);
1102 best->comedi = devpriv;
1103 best->serial = devpriv->serial;
1104 devpriv->slot = best;
1105 up(&best->mutex);
1106 }
1107 }
1108 up(&dt9812_mutex);
1109
1110 return 0;
1111 }
1112
1113 static int dt9812_detach(struct comedi_device *dev)
1114 {
1115 return 0;
1116 }
1117
1118 static struct comedi_driver dt9812_comedi_driver = {
1119 .module = THIS_MODULE,
1120 .driver_name = "dt9812",
1121 .attach = dt9812_attach,
1122 .detach = dt9812_detach,
1123 };
1124
1125 static int __init usb_dt9812_init(void)
1126 {
1127 int result, i;
1128
1129 /* Initialize all driver slots */
1130 for (i = 0; i < DT9812_NUM_SLOTS; i++) {
1131 sema_init(&dt9812[i].mutex, 1);
1132 dt9812[i].serial = 0;
1133 dt9812[i].usb = NULL;
1134 dt9812[i].comedi = NULL;
1135 }
1136 dt9812[12].serial = 0x0;
1137
1138 /* register with the USB subsystem */
1139 result = usb_register(&dt9812_usb_driver);
1140 if (result) {
1141 printk(KERN_ERR KBUILD_MODNAME
1142 ": usb_register failed. Error number %d\n", result);
1143 return result;
1144 }
1145 /* register with comedi */
1146 result = comedi_driver_register(&dt9812_comedi_driver);
1147 if (result) {
1148 usb_deregister(&dt9812_usb_driver);
1149 err("comedi_driver_register failed. Error number %d", result);
1150 }
1151
1152 return result;
1153 }
1154
1155 static void __exit usb_dt9812_exit(void)
1156 {
1157 /* unregister with comedi */
1158 comedi_driver_unregister(&dt9812_comedi_driver);
1159
1160 /* deregister this driver with the USB subsystem */
1161 usb_deregister(&dt9812_usb_driver);
1162 }
1163
1164 module_init(usb_dt9812_init);
1165 module_exit(usb_dt9812_exit);
1166
1167 MODULE_AUTHOR("Anders Blomdell <anders.blomdell@control.lth.se>");
1168 MODULE_DESCRIPTION("Comedi DT9812 driver");
1169 MODULE_LICENSE("GPL");
kernel source for telekom puls (alcatel/mediatek)