drivers/scsi/pmcraid.h

   1 /*
   2  * pmcraid.h -- PMC Sierra MaxRAID controller driver header file
   3  *
   4  * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
   5  *             PMC-Sierra Inc
   6  *
   7  * Copyright (C) 2008, 2009 PMC Sierra Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  */
  23
  24 #ifndef _PMCRAID_H
  25 #define _PMCRAID_H
  26
  27 #include <linux/types.h>
  28 #include <linux/completion.h>
  29 #include <linux/list.h>
  30 #include <scsi/scsi.h>
  31 #include <scsi/scsi_cmnd.h>
  32 #include <linux/cdev.h>
  33 #include <net/netlink.h>
  34 #include <net/genetlink.h>
  35 #include <linux/connector.h>
  36 /*
  37  * Driver name   : string representing the driver name
  38  * Device file   : /dev file to be used for management interfaces
  39  * Driver version: version string in major_version.minor_version.patch format
  40  * Driver date   : date information in "Mon dd yyyy" format
  41  */
  42 #define PMCRAID_DRIVER_NAME             "PMC MaxRAID"
  43 #define PMCRAID_DEVFILE                 "pmcsas"
  44 #define PMCRAID_DRIVER_VERSION          "1.0.3"
  45
  46 #define PMCRAID_FW_VERSION_1            0x002
  47
  48 /* Maximum number of adapters supported by current version of the driver */
  49 #define PMCRAID_MAX_ADAPTERS            1024
  50
  51 /* Bit definitions as per firmware, bit position [0][1][2].....[31] */
  52 #define PMC_BIT8(n)          (1 << (7-n))
  53 #define PMC_BIT16(n)         (1 << (15-n))
  54 #define PMC_BIT32(n)         (1 << (31-n))
  55
  56 /* PMC PCI vendor ID and device ID values */
  57 #define PCI_VENDOR_ID_PMC                       0x11F8
  58 #define PCI_DEVICE_ID_PMC_MAXRAID               0x5220
  59
  60 /*
  61  * MAX_CMD          : maximum commands that can be outstanding with IOA
  62  * MAX_IO_CMD       : command blocks available for IO commands
  63  * MAX_HCAM_CMD     : command blocks avaibale for HCAMS
  64  * MAX_INTERNAL_CMD : command blocks avaible for internal commands like reset
  65  */
  66 #define PMCRAID_MAX_CMD                         1024
  67 #define PMCRAID_MAX_IO_CMD                      1020
  68 #define PMCRAID_MAX_HCAM_CMD                    2
  69 #define PMCRAID_MAX_INTERNAL_CMD                2
  70
  71 /* MAX_IOADLS       : max number of scatter-gather lists supported by IOA
  72  * IOADLS_INTERNAL  : number of ioadls included as part of IOARCB.
  73  * IOADLS_EXTERNAL  : number of ioadls allocated external to IOARCB
  74  */
  75 #define PMCRAID_IOADLS_INTERNAL                  27
  76 #define PMCRAID_IOADLS_EXTERNAL                  37
  77 #define PMCRAID_MAX_IOADLS                       PMCRAID_IOADLS_INTERNAL
  78
  79 /* HRRQ_ENTRY_SIZE  : size of hrrq buffer
  80  * IOARCB_ALIGNMENT : alignment required for IOARCB
  81  * IOADL_ALIGNMENT  : alignment requirement for IOADLs
  82  * MSIX_VECTORS     : number of MSIX vectors supported
  83  */
  84 #define HRRQ_ENTRY_SIZE                          sizeof(__le32)
  85 #define PMCRAID_IOARCB_ALIGNMENT                 32
  86 #define PMCRAID_IOADL_ALIGNMENT                  16
  87 #define PMCRAID_IOASA_ALIGNMENT                  4
  88 #define PMCRAID_NUM_MSIX_VECTORS                 16
  89
  90 /* various other limits */
  91 #define PMCRAID_VENDOR_ID_LEN                   8
  92 #define PMCRAID_PRODUCT_ID_LEN                  16
  93 #define PMCRAID_SERIAL_NUM_LEN                  8
  94 #define PMCRAID_LUN_LEN                         8
  95 #define PMCRAID_MAX_CDB_LEN                     16
  96 #define PMCRAID_DEVICE_ID_LEN                   8
  97 #define PMCRAID_SENSE_DATA_LEN                  256
  98 #define PMCRAID_ADD_CMD_PARAM_LEN               48
  99
 100 #define PMCRAID_MAX_BUS_TO_SCAN                  1
 101 #define PMCRAID_MAX_NUM_TARGETS_PER_BUS          256
 102 #define PMCRAID_MAX_NUM_LUNS_PER_TARGET          8
 103
 104 /* IOA bus/target/lun number of IOA resources */
 105 #define PMCRAID_IOA_BUS_ID                       0xfe
 106 #define PMCRAID_IOA_TARGET_ID                    0xff
 107 #define PMCRAID_IOA_LUN_ID                       0xff
 108 #define PMCRAID_VSET_BUS_ID                      0x1
 109 #define PMCRAID_VSET_LUN_ID                      0x0
 110 #define PMCRAID_PHYS_BUS_ID                      0x0
 111 #define PMCRAID_VIRTUAL_ENCL_BUS_ID              0x8
 112 #define PMCRAID_MAX_VSET_TARGETS                 0x7F
 113 #define PMCRAID_MAX_VSET_LUNS_PER_TARGET         8
 114
 115 #define PMCRAID_IOA_MAX_SECTORS                  32767
 116 #define PMCRAID_VSET_MAX_SECTORS                 512
 117 #define PMCRAID_MAX_CMD_PER_LUN                  254
 118
 119 /* Number of configuration table entries (resources), includes 1 FP,
 120  * 1 Enclosure device
 121  */
 122 #define PMCRAID_MAX_RESOURCES                    256
 123
 124 /* Adapter Commands used by driver */
 125 #define PMCRAID_QUERY_RESOURCE_STATE             0xC2
 126 #define PMCRAID_RESET_DEVICE                     0xC3
 127 /* options to select reset target */
 128 #define ENABLE_RESET_MODIFIER                    0x80
 129 #define RESET_DEVICE_LUN                         0x40
 130 #define RESET_DEVICE_TARGET                      0x20
 131 #define RESET_DEVICE_BUS                         0x10
 132
 133 #define PMCRAID_IDENTIFY_HRRQ                    0xC4
 134 #define PMCRAID_QUERY_IOA_CONFIG                 0xC5
 135 #define PMCRAID_QUERY_CMD_STATUS                 0xCB
 136 #define PMCRAID_ABORT_CMD                        0xC7
 137
 138 /* CANCEL ALL command, provides option for setting SYNC_COMPLETE
 139  * on the target resources for which commands got cancelled
 140  */
 141 #define PMCRAID_CANCEL_ALL_REQUESTS              0xCE
 142 #define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL       PMC_BIT8(0)
 143
 144 /* HCAM command and types of HCAM supported by IOA */
 145 #define PMCRAID_HOST_CONTROLLED_ASYNC            0xCF
 146 #define PMCRAID_HCAM_CODE_CONFIG_CHANGE          0x01
 147 #define PMCRAID_HCAM_CODE_LOG_DATA               0x02
 148
 149 /* IOA shutdown command and various shutdown types */
 150 #define PMCRAID_IOA_SHUTDOWN                     0xF7
 151 #define PMCRAID_SHUTDOWN_NORMAL                  0x00
 152 #define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL      0x40
 153 #define PMCRAID_SHUTDOWN_NONE                    0x100
 154 #define PMCRAID_SHUTDOWN_ABBREV                  0x80
 155
 156 /* SET SUPPORTED DEVICES command and the option to select all the
 157  * devices to be supported
 158  */
 159 #define PMCRAID_SET_SUPPORTED_DEVICES            0xFB
 160 #define ALL_DEVICES_SUPPORTED                    PMC_BIT8(0)
 161
 162 /* This option is used with SCSI WRITE_BUFFER command */
 163 #define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE         0x05
 164
 165 /* IOASC Codes used by driver */
 166 #define PMCRAID_IOASC_SENSE_MASK                 0xFFFFFF00
 167 #define PMCRAID_IOASC_SENSE_KEY(ioasc)           ((ioasc) >> 24)
 168 #define PMCRAID_IOASC_SENSE_CODE(ioasc)          (((ioasc) & 0x00ff0000) >> 16)
 169 #define PMCRAID_IOASC_SENSE_QUAL(ioasc)          (((ioasc) & 0x0000ff00) >> 8)
 170 #define PMCRAID_IOASC_SENSE_STATUS(ioasc)        ((ioasc) & 0x000000ff)
 171
 172 #define PMCRAID_IOASC_GOOD_COMPLETION                   0x00000000
 173 #define PMCRAID_IOASC_GC_IOARCB_NOTFOUND                0x005A0000
 174 #define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED              0x02040200
 175 #define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED             0x02048000
 176 #define PMCRAID_IOASC_NR_SYNC_REQUIRED                  0x023F0000
 177 #define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC          0x03110C00
 178 #define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE             0x04050000
 179 #define PMCRAID_IOASC_HW_DEVICE_TIMEOUT                 0x04080100
 180 #define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR        0x04448500
 181 #define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED             0x04448600
 182 #define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE        0x05250000
 183 #define PMCRAID_IOASC_AC_TERMINATED_BY_HOST             0x0B5A0000
 184 #define PMCRAID_IOASC_UA_BUS_WAS_RESET                  0x06290000
 185 #define PMCRAID_IOASC_TIME_STAMP_OUT_OF_SYNC            0x06908B00
 186 #define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER         0x06298000
 187
 188 /* Driver defined IOASCs */
 189 #define PMCRAID_IOASC_IOA_WAS_RESET                     0x10000001
 190 #define PMCRAID_IOASC_PCI_ACCESS_ERROR                  0x10000002
 191
 192 /* Various timeout values (in milliseconds) used. If any of these are chip
 193  * specific, move them to pmcraid_chip_details structure.
 194  */
 195 #define PMCRAID_PCI_DEASSERT_TIMEOUT            2000
 196 #define PMCRAID_BIST_TIMEOUT                    2000
 197 #define PMCRAID_AENWAIT_TIMEOUT                 5000
 198 #define PMCRAID_TRANSOP_TIMEOUT                 60000
 199
 200 #define PMCRAID_RESET_TIMEOUT                   (2 * HZ)
 201 #define PMCRAID_CHECK_FOR_RESET_TIMEOUT         ((HZ / 10))
 202 #define PMCRAID_VSET_IO_TIMEOUT                 (60 * HZ)
 203 #define PMCRAID_INTERNAL_TIMEOUT                (60 * HZ)
 204 #define PMCRAID_SHUTDOWN_TIMEOUT                (150 * HZ)
 205 #define PMCRAID_RESET_BUS_TIMEOUT               (60 * HZ)
 206 #define PMCRAID_RESET_HOST_TIMEOUT              (150 * HZ)
 207 #define PMCRAID_REQUEST_SENSE_TIMEOUT           (30 * HZ)
 208 #define PMCRAID_SET_SUP_DEV_TIMEOUT             (2 * 60 * HZ)
 209
 210 /* structure to represent a scatter-gather element (IOADL descriptor) */
 211 struct pmcraid_ioadl_desc {
 212         __le64 address;
 213         __le32 data_len;
 214         __u8  reserved[3];
 215         __u8  flags;
 216 } __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT)));
 217
 218 /* pmcraid_ioadl_desc.flags values */
 219 #define IOADL_FLAGS_CHAINED      PMC_BIT8(0)
 220 #define IOADL_FLAGS_LAST_DESC    PMC_BIT8(1)
 221 #define IOADL_FLAGS_READ_LAST    PMC_BIT8(1)
 222 #define IOADL_FLAGS_WRITE_LAST   PMC_BIT8(1)
 223
 224
 225 /* additional IOARCB data which can be CDB or additional request parameters
 226  * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
 227  * number of IOADLs are limted to 27. In case they are more than 27, they will
 228  * be used in chained form
 229  */
 230 struct pmcraid_ioarcb_add_data {
 231         union {
 232                 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL];
 233                 __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN];
 234         } u;
 235 };
 236
 237 /*
 238  * IOA Request Control Block
 239  */
 240 struct pmcraid_ioarcb {
 241         __le64 ioarcb_bus_addr;
 242         __le32 resource_handle;
 243         __le32 response_handle;
 244         __le64 ioadl_bus_addr;
 245         __le32 ioadl_length;
 246         __le32 data_transfer_length;
 247         __le64 ioasa_bus_addr;
 248         __le16 ioasa_len;
 249         __le16 cmd_timeout;
 250         __le16 add_cmd_param_offset;
 251         __le16 add_cmd_param_length;
 252         __le32 reserved1[2];
 253         __le32 reserved2;
 254         __u8  request_type;
 255         __u8  request_flags0;
 256         __u8  request_flags1;
 257         __u8  hrrq_id;
 258         __u8  cdb[PMCRAID_MAX_CDB_LEN];
 259         struct pmcraid_ioarcb_add_data add_data;
 260 } __attribute__((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
 261
 262 /* well known resource handle values */
 263 #define PMCRAID_IOA_RES_HANDLE        0xffffffff
 264 #define PMCRAID_INVALID_RES_HANDLE    0
 265
 266 /* pmcraid_ioarcb.request_type values */
 267 #define REQ_TYPE_SCSI                 0x00
 268 #define REQ_TYPE_IOACMD               0x01
 269 #define REQ_TYPE_HCAM                 0x02
 270
 271 /* pmcraid_ioarcb.flags0 values */
 272 #define TRANSFER_DIR_WRITE            PMC_BIT8(0)
 273 #define INHIBIT_UL_CHECK              PMC_BIT8(2)
 274 #define SYNC_OVERRIDE                 PMC_BIT8(3)
 275 #define SYNC_COMPLETE                 PMC_BIT8(4)
 276 #define NO_LINK_DESCS                 PMC_BIT8(5)
 277
 278 /* pmcraid_ioarcb.flags1 values */
 279 #define DELAY_AFTER_RESET             PMC_BIT8(0)
 280 #define TASK_TAG_SIMPLE               0x10
 281 #define TASK_TAG_ORDERED              0x20
 282 #define TASK_TAG_QUEUE_HEAD           0x30
 283
 284 /* toggle bit offset in response handle */
 285 #define HRRQ_TOGGLE_BIT               0x01
 286 #define HRRQ_RESPONSE_BIT             0x02
 287
 288 /* IOA Status Area */
 289 struct pmcraid_ioasa_vset {
 290         __le32 failing_lba_hi;
 291         __le32 failing_lba_lo;
 292         __le32 reserved;
 293 } __attribute__((packed, aligned(4)));
 294
 295 struct pmcraid_ioasa {
 296         __le32 ioasc;
 297         __le16 returned_status_length;
 298         __le16 available_status_length;
 299         __le32 residual_data_length;
 300         __le32 ilid;
 301         __le32 fd_ioasc;
 302         __le32 fd_res_address;
 303         __le32 fd_res_handle;
 304         __le32 reserved;
 305
 306         /* resource specific sense information */
 307         union {
 308                 struct pmcraid_ioasa_vset vset;
 309         } u;
 310
 311         /* IOA autosense data */
 312         __le16 auto_sense_length;
 313         __le16 error_data_length;
 314         __u8  sense_data[PMCRAID_SENSE_DATA_LEN];
 315 } __attribute__((packed, aligned(4)));
 316
 317 #define PMCRAID_DRIVER_ILID           0xffffffff
 318
 319 /* Config Table Entry per Resource */
 320 struct pmcraid_config_table_entry {
 321         __u8  resource_type;
 322         __u8  bus_protocol;
 323         __le16 array_id;
 324         __u8  common_flags0;
 325         __u8  common_flags1;
 326         __u8  unique_flags0;
 327         __u8  unique_flags1;    /*also used as vset target_id */
 328         __le32 resource_handle;
 329         __le32 resource_address;
 330         __u8  device_id[PMCRAID_DEVICE_ID_LEN];
 331         __u8  lun[PMCRAID_LUN_LEN];
 332 } __attribute__((packed, aligned(4)));
 333
 334 /* extended configuration table sizes are also of 32 bytes in size */
 335 struct pmcraid_config_table_entry_ext {
 336         struct pmcraid_config_table_entry cfgte;
 337 };
 338
 339 /* resource types (config_table_entry.resource_type values) */
 340 #define RES_TYPE_AF_DASD     0x00
 341 #define RES_TYPE_GSCSI       0x01
 342 #define RES_TYPE_VSET        0x02
 343 #define RES_TYPE_IOA_FP      0xFF
 344
 345 #define RES_IS_IOA(res)      ((res).resource_type == RES_TYPE_IOA_FP)
 346 #define RES_IS_GSCSI(res)    ((res).resource_type == RES_TYPE_GSCSI)
 347 #define RES_IS_VSET(res)     ((res).resource_type == RES_TYPE_VSET)
 348 #define RES_IS_AFDASD(res)   ((res).resource_type == RES_TYPE_AF_DASD)
 349
 350 /* bus_protocol values used by driver */
 351 #define RES_TYPE_VENCLOSURE  0x8
 352
 353 /* config_table_entry.common_flags0 */
 354 #define MULTIPATH_RESOURCE   PMC_BIT32(0)
 355
 356 /* unique_flags1 */
 357 #define IMPORT_MODE_MANUAL   PMC_BIT8(0)
 358
 359 /* well known resource handle values */
 360 #define RES_HANDLE_IOA       0xFFFFFFFF
 361 #define RES_HANDLE_NONE      0x00000000
 362
 363 /* well known resource address values */
 364 #define RES_ADDRESS_IOAFP    0xFEFFFFFF
 365 #define RES_ADDRESS_INVALID  0xFFFFFFFF
 366
 367 /* BUS/TARGET/LUN values from resource_addrr */
 368 #define RES_BUS(res_addr)    (le32_to_cpu(res_addr) & 0xFF)
 369 #define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF)
 370 #define RES_LUN(res_addr)    0x0
 371
 372 /* configuration table structure */
 373 struct pmcraid_config_table {
 374         __le16 num_entries;
 375         __u8  table_format;
 376         __u8  reserved1;
 377         __u8  flags;
 378         __u8  reserved2[11];
 379         union {
 380                 struct pmcraid_config_table_entry
 381                                 entries[PMCRAID_MAX_RESOURCES];
 382                 struct pmcraid_config_table_entry_ext
 383                                 entries_ext[PMCRAID_MAX_RESOURCES];
 384         };
 385 } __attribute__((packed, aligned(4)));
 386
 387 /* config_table.flags value */
 388 #define MICROCODE_UPDATE_REQUIRED               PMC_BIT32(0)
 389
 390 /*
 391  * HCAM format
 392  */
 393 #define PMCRAID_HOSTRCB_LDNSIZE                 4056
 394
 395 /* Error log notification format */
 396 struct pmcraid_hostrcb_error {
 397         __le32 fd_ioasc;
 398         __le32 fd_ra;
 399         __le32 fd_rh;
 400         __le32 prc;
 401         union {
 402                 __u8 data[PMCRAID_HOSTRCB_LDNSIZE];
 403         } u;
 404 } __attribute__ ((packed, aligned(4)));
 405
 406 struct pmcraid_hcam_hdr {
 407         __u8  op_code;
 408         __u8  notification_type;
 409         __u8  notification_lost;
 410         __u8  flags;
 411         __u8  overlay_id;
 412         __u8  reserved1[3];
 413         __le32 ilid;
 414         __le32 timestamp1;
 415         __le32 timestamp2;
 416         __le32 data_len;
 417 } __attribute__((packed, aligned(4)));
 418
 419 #define PMCRAID_AEN_GROUP       0x3
 420
 421 struct pmcraid_hcam_ccn {
 422         struct pmcraid_hcam_hdr header;
 423         struct pmcraid_config_table_entry cfg_entry;
 424         struct pmcraid_config_table_entry cfg_entry_old;
 425 } __attribute__((packed, aligned(4)));
 426
 427 #define PMCRAID_CCN_EXT_SIZE    3944
 428 struct pmcraid_hcam_ccn_ext {
 429         struct pmcraid_hcam_hdr header;
 430         struct pmcraid_config_table_entry_ext cfg_entry;
 431         struct pmcraid_config_table_entry_ext cfg_entry_old;
 432         __u8   reserved[PMCRAID_CCN_EXT_SIZE];
 433 } __attribute__((packed, aligned(4)));
 434
 435 struct pmcraid_hcam_ldn {
 436         struct pmcraid_hcam_hdr header;
 437         struct pmcraid_hostrcb_error error_log;
 438 } __attribute__((packed, aligned(4)));
 439
 440 /* pmcraid_hcam.op_code values */
 441 #define HOSTRCB_TYPE_CCN                        0xE1
 442 #define HOSTRCB_TYPE_LDN                        0xE2
 443
 444 /* pmcraid_hcam.notification_type values */
 445 #define NOTIFICATION_TYPE_ENTRY_CHANGED         0x0
 446 #define NOTIFICATION_TYPE_ENTRY_NEW             0x1
 447 #define NOTIFICATION_TYPE_ENTRY_DELETED         0x2
 448 #define NOTIFICATION_TYPE_STATE_CHANGE          0x3
 449 #define NOTIFICATION_TYPE_ENTRY_STATECHANGED    0x4
 450 #define NOTIFICATION_TYPE_ERROR_LOG             0x10
 451 #define NOTIFICATION_TYPE_INFORMATION_LOG       0x11
 452
 453 #define HOSTRCB_NOTIFICATIONS_LOST              PMC_BIT8(0)
 454
 455 /* pmcraid_hcam.flags values */
 456 #define HOSTRCB_INTERNAL_OP_ERROR               PMC_BIT8(0)
 457 #define HOSTRCB_ERROR_RESPONSE_SENT             PMC_BIT8(1)
 458
 459 /* pmcraid_hcam.overlay_id values */
 460 #define HOSTRCB_OVERLAY_ID_08                   0x08
 461 #define HOSTRCB_OVERLAY_ID_09                   0x09
 462 #define HOSTRCB_OVERLAY_ID_11                   0x11
 463 #define HOSTRCB_OVERLAY_ID_12                   0x12
 464 #define HOSTRCB_OVERLAY_ID_13                   0x13
 465 #define HOSTRCB_OVERLAY_ID_14                   0x14
 466 #define HOSTRCB_OVERLAY_ID_16                   0x16
 467 #define HOSTRCB_OVERLAY_ID_17                   0x17
 468 #define HOSTRCB_OVERLAY_ID_20                   0x20
 469 #define HOSTRCB_OVERLAY_ID_FF                   0xFF
 470
 471 /* Implementation specific card details */
 472 struct pmcraid_chip_details {
 473         /* hardware register offsets */
 474         unsigned long  ioastatus;
 475         unsigned long  ioarrin;
 476         unsigned long  mailbox;
 477         unsigned long  global_intr_mask;
 478         unsigned long  ioa_host_intr;
 479         unsigned long  ioa_host_msix_intr;
 480         unsigned long  ioa_host_intr_clr;
 481         unsigned long  ioa_host_mask;
 482         unsigned long  ioa_host_mask_clr;
 483         unsigned long  host_ioa_intr;
 484         unsigned long  host_ioa_intr_clr;
 485
 486         /* timeout used during transitional to operational state */
 487         unsigned long transop_timeout;
 488 };
 489
 490 /* IOA to HOST doorbells (interrupts) */
 491 #define INTRS_TRANSITION_TO_OPERATIONAL         PMC_BIT32(0)
 492 #define INTRS_IOARCB_TRANSFER_FAILED            PMC_BIT32(3)
 493 #define INTRS_IOA_UNIT_CHECK                    PMC_BIT32(4)
 494 #define INTRS_NO_HRRQ_FOR_CMD_RESPONSE          PMC_BIT32(5)
 495 #define INTRS_CRITICAL_OP_IN_PROGRESS           PMC_BIT32(6)
 496 #define INTRS_IO_DEBUG_ACK                      PMC_BIT32(7)
 497 #define INTRS_IOARRIN_LOST                      PMC_BIT32(27)
 498 #define INTRS_SYSTEM_BUS_MMIO_ERROR             PMC_BIT32(28)
 499 #define INTRS_IOA_PROCESSOR_ERROR               PMC_BIT32(29)
 500 #define INTRS_HRRQ_VALID                        PMC_BIT32(30)
 501 #define INTRS_OPERATIONAL_STATUS                PMC_BIT32(0)
 502 #define INTRS_ALLOW_MSIX_VECTOR0                PMC_BIT32(31)
 503
 504 /* Host to IOA Doorbells */
 505 #define DOORBELL_RUNTIME_RESET                  PMC_BIT32(1)
 506 #define DOORBELL_IOA_RESET_ALERT                PMC_BIT32(7)
 507 #define DOORBELL_IOA_DEBUG_ALERT                PMC_BIT32(9)
 508 #define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS       PMC_BIT32(8)
 509 #define DOORBELL_IOA_START_BIST                 PMC_BIT32(23)
 510 #define DOORBELL_INTR_MODE_MSIX                 PMC_BIT32(25)
 511 #define DOORBELL_INTR_MSIX_CLR                  PMC_BIT32(26)
 512 #define DOORBELL_RESET_IOA                      PMC_BIT32(31)
 513
 514 /* Global interrupt mask register value */
 515 #define GLOBAL_INTERRUPT_MASK                   0x5ULL
 516
 517 #define PMCRAID_ERROR_INTERRUPTS        (INTRS_IOARCB_TRANSFER_FAILED | \
 518                                          INTRS_IOA_UNIT_CHECK | \
 519                                          INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \
 520                                          INTRS_IOARRIN_LOST | \
 521                                          INTRS_SYSTEM_BUS_MMIO_ERROR | \
 522                                          INTRS_IOA_PROCESSOR_ERROR)
 523
 524 #define PMCRAID_PCI_INTERRUPTS          (PMCRAID_ERROR_INTERRUPTS | \
 525                                          INTRS_HRRQ_VALID | \
 526                                          INTRS_TRANSITION_TO_OPERATIONAL |\
 527                                          INTRS_ALLOW_MSIX_VECTOR0)
 528
 529 /* control_block, associated with each of the commands contains IOARCB, IOADLs
 530  * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
 531  * additional request parameters (of max size 48) any command.
 532  */
 533 struct pmcraid_control_block {
 534         struct pmcraid_ioarcb ioarcb;
 535         struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3];
 536         struct pmcraid_ioasa ioasa;
 537 } __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
 538
 539 /* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls
 540  */
 541 struct pmcraid_sglist {
 542         u32 order;
 543         u32 num_sg;
 544         u32 num_dma_sg;
 545         u32 buffer_len;
 546         struct scatterlist scatterlist[1];
 547 };
 548
 549 /* page D0 inquiry data of focal point resource */
 550 struct pmcraid_inquiry_data {
 551         __u8    ph_dev_type;
 552         __u8    page_code;
 553         __u8    reserved1;
 554         __u8    add_page_len;
 555         __u8    length;
 556         __u8    reserved2;
 557         __le16  fw_version;
 558         __u8    reserved3[16];
 559 };
 560
 561 #define PMCRAID_TIMESTAMP_LEN           12
 562 #define PMCRAID_REQ_TM_STR_LEN          6
 563 #define PMCRAID_SCSI_SET_TIMESTAMP      0xA4
 564 #define PMCRAID_SCSI_SERVICE_ACTION     0x0F
 565
 566 struct pmcraid_timestamp_data {
 567         __u8 reserved1[4];
 568         __u8 timestamp[PMCRAID_REQ_TM_STR_LEN];         /* current time value */
 569         __u8 reserved2[2];
 570 };
 571
 572 /* pmcraid_cmd - LLD representation of SCSI command */
 573 struct pmcraid_cmd {
 574
 575         /* Ptr and bus address of DMA.able control block for this command */
 576         struct pmcraid_control_block *ioa_cb;
 577         dma_addr_t ioa_cb_bus_addr;
 578         dma_addr_t dma_handle;
 579
 580         /* pointer to mid layer structure of SCSI commands */
 581         struct scsi_cmnd *scsi_cmd;
 582
 583         struct list_head free_list;
 584         struct completion wait_for_completion;
 585         struct timer_list timer;        /* needed for internal commands */
 586         u32 timeout;                    /* current timeout value */
 587         u32 index;                      /* index into the command list */
 588         u8 completion_req;              /* for handling internal commands */
 589         u8 release;                     /* for handling completions */
 590
 591         void (*cmd_done) (struct pmcraid_cmd *);
 592         struct pmcraid_instance *drv_inst;
 593
 594         struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
 595
 596         /* scratch used */
 597         union {
 598                 /* during reset sequence */
 599                 unsigned long time_left;
 600                 struct pmcraid_resource_entry *res;
 601                 int hrrq_index;
 602
 603                 /* used during IO command error handling. Sense buffer
 604                  * for REQUEST SENSE command if firmware is not sending
 605                  * auto sense data
 606                  */
 607                 struct  {
 608                         u8 *sense_buffer;
 609                         dma_addr_t sense_buffer_dma;
 610                 };
 611         };
 612 };
 613
 614 /*
 615  * Interrupt registers of IOA
 616  */
 617 struct pmcraid_interrupts {
 618         void __iomem *ioa_host_interrupt_reg;
 619         void __iomem *ioa_host_msix_interrupt_reg;
 620         void __iomem *ioa_host_interrupt_clr_reg;
 621         void __iomem *ioa_host_interrupt_mask_reg;
 622         void __iomem *ioa_host_interrupt_mask_clr_reg;
 623         void __iomem *global_interrupt_mask_reg;
 624         void __iomem *host_ioa_interrupt_reg;
 625         void __iomem *host_ioa_interrupt_clr_reg;
 626 };
 627
 628 /* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
 629 struct pmcraid_isr_param {
 630         struct pmcraid_instance *drv_inst;
 631         u16 vector;                     /* allocated msi-x vector */
 632         u8 hrrq_id;                     /* hrrq entry index */
 633 };
 634
 635
 636 /* AEN message header sent as part of event data to applications */
 637 struct pmcraid_aen_msg {
 638         u32 hostno;
 639         u32 length;
 640         u8  reserved[8];
 641         u8  data[0];
 642 };
 643
 644 /* Controller state event message type */
 645 struct pmcraid_state_msg {
 646         struct pmcraid_aen_msg msg;
 647         u32 ioa_state;
 648 };
 649
 650 #define PMC_DEVICE_EVENT_RESET_START            0x11000000
 651 #define PMC_DEVICE_EVENT_RESET_SUCCESS          0x11000001
 652 #define PMC_DEVICE_EVENT_RESET_FAILED           0x11000002
 653 #define PMC_DEVICE_EVENT_SHUTDOWN_START         0x11000003
 654 #define PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS       0x11000004
 655 #define PMC_DEVICE_EVENT_SHUTDOWN_FAILED        0x11000005
 656
 657 struct pmcraid_hostrcb {
 658         struct pmcraid_instance *drv_inst;
 659         struct pmcraid_aen_msg *msg;
 660         struct pmcraid_hcam_hdr *hcam;  /* pointer to hcam buffer */
 661         struct pmcraid_cmd  *cmd;       /* pointer to command block used */
 662         dma_addr_t baddr;               /* system address of hcam buffer */
 663         atomic_t ignore;                /* process HCAM response ? */
 664 };
 665
 666 #define PMCRAID_AEN_HDR_SIZE    sizeof(struct pmcraid_aen_msg)
 667
 668
 669
 670 /*
 671  * Per adapter structure maintained by LLD
 672  */
 673 struct pmcraid_instance {
 674         /* Array of allowed-to-be-exposed resources, initialized from
 675          * Configutation Table, later updated with CCNs
 676          */
 677         struct pmcraid_resource_entry *res_entries;
 678
 679         struct list_head free_res_q;    /* res_entries lists for easy lookup */
 680         struct list_head used_res_q;    /* List of to be exposed resources */
 681         spinlock_t resource_lock;       /* spinlock to protect resource list */
 682
 683         void __iomem *mapped_dma_addr;
 684         void __iomem *ioa_status;       /* Iomapped IOA status register */
 685         void __iomem *mailbox;          /* Iomapped mailbox register */
 686         void __iomem *ioarrin;          /* IOmapped IOARR IN register */
 687
 688         struct pmcraid_interrupts int_regs;
 689         struct pmcraid_chip_details *chip_cfg;
 690
 691         /* HostRCBs needed for HCAM */
 692         struct pmcraid_hostrcb ldn;
 693         struct pmcraid_hostrcb ccn;
 694         struct pmcraid_state_msg scn;   /* controller state change msg */
 695
 696
 697         /* Bus address of start of HRRQ */
 698         dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS];
 699
 700         /* Pointer to 1st entry of HRRQ */
 701         __be32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS];
 702
 703         /* Pointer to last entry of HRRQ */
 704         __be32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS];
 705
 706         /* Pointer to current pointer of hrrq */
 707         __be32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS];
 708
 709         /* Lock for HRRQ access */
 710         spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
 711
 712         struct pmcraid_inquiry_data *inq_data;
 713         dma_addr_t  inq_data_baddr;
 714
 715         struct pmcraid_timestamp_data *timestamp_data;
 716         dma_addr_t  timestamp_data_baddr;
 717
 718         /* size of configuration table entry, varies based on the firmware */
 719         u32     config_table_entry_size;
 720
 721         /* Expected toggle bit at host */
 722         u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
 723
 724
 725         /* Wait Q for  threads to wait for Reset IOA completion */
 726         wait_queue_head_t reset_wait_q;
 727         struct pmcraid_cmd *reset_cmd;
 728
 729         /* structures for supporting SIGIO based AEN. */
 730         struct fasync_struct *aen_queue;
 731         struct mutex aen_queue_lock;    /* lock for aen subscribers list */
 732         struct cdev cdev;
 733
 734         struct Scsi_Host *host; /* mid layer interface structure handle */
 735         struct pci_dev *pdev;   /* PCI device structure handle */
 736
 737         /* No of Reset IOA retries . IOA marked dead if threshold exceeds */
 738         u8 ioa_reset_attempts;
 739 #define PMCRAID_RESET_ATTEMPTS 3
 740
 741         u8  current_log_level;  /* default level for logging IOASC errors */
 742
 743         u8  num_hrrq;           /* Number of interrupt vectors allocated */
 744         u8  interrupt_mode;     /* current interrupt mode legacy or msix */
 745         dev_t dev;              /* Major-Minor numbers for Char device */
 746
 747         /* Used as ISR handler argument */
 748         struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
 749
 750         /* Message id as filled in last fired IOARCB, used to identify HRRQ */
 751         atomic_t last_message_id;
 752
 753         /* configuration table */
 754         struct pmcraid_config_table *cfg_table;
 755         dma_addr_t cfg_table_bus_addr;
 756
 757         /* structures related to command blocks */
 758         struct kmem_cache *cmd_cachep;          /* cache for cmd blocks */
 759         struct pci_pool *control_pool;          /* pool for control blocks */
 760         char   cmd_pool_name[64];               /* name of cmd cache */
 761         char   ctl_pool_name[64];               /* name of control cache */
 762
 763         struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD];
 764
 765         struct list_head free_cmd_pool;
 766         struct list_head pending_cmd_pool;
 767         spinlock_t free_pool_lock;              /* free pool lock */
 768         spinlock_t pending_pool_lock;           /* pending pool lock */
 769
 770         /* Tasklet to handle deferred processing */
 771         struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
 772
 773         /* Work-queue (Shared) for deferred reset processing */
 774         struct work_struct worker_q;
 775
 776         /* No of IO commands pending with FW */
 777         atomic_t outstanding_cmds;
 778
 779         /* should add/delete resources to mid-layer now ?*/
 780         atomic_t expose_resources;
 781
 782
 783
 784         u32 ioa_state:4;        /* For IOA Reset sequence FSM */
 785 #define IOA_STATE_OPERATIONAL       0x0
 786 #define IOA_STATE_UNKNOWN           0x1
 787 #define IOA_STATE_DEAD              0x2
 788 #define IOA_STATE_IN_SOFT_RESET     0x3
 789 #define IOA_STATE_IN_HARD_RESET     0x4
 790 #define IOA_STATE_IN_RESET_ALERT    0x5
 791 #define IOA_STATE_IN_BRINGDOWN      0x6
 792 #define IOA_STATE_IN_BRINGUP        0x7
 793
 794         u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */
 795         u32 ioa_hard_reset:1;   /* TRUE if Hard Reset is needed */
 796         u32 ioa_unit_check:1;   /* Indicates Unit Check condition */
 797         u32 ioa_bringdown:1;    /* whether IOA needs to be brought down */
 798         u32 force_ioa_reset:1;  /* force adapter reset ? */
 799         u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */
 800         u32 ioa_shutdown_type:2;/* shutdown type used during reset */
 801 #define SHUTDOWN_NONE               0x0
 802 #define SHUTDOWN_NORMAL             0x1
 803 #define SHUTDOWN_ABBREV             0x2
 804         u32 timestamp_error:1; /* indicate set timestamp for out of sync */
 805
 806 };
 807
 808 /* LLD maintained resource entry structure */
 809 struct pmcraid_resource_entry {
 810         struct list_head queue; /* link to "to be exposed" resources */
 811         union {
 812                 struct pmcraid_config_table_entry cfg_entry;
 813                 struct pmcraid_config_table_entry_ext cfg_entry_ext;
 814         };
 815         struct scsi_device *scsi_dev;   /* Link scsi_device structure */
 816         atomic_t read_failures;         /* count of failed READ commands */
 817         atomic_t write_failures;        /* count of failed WRITE commands */
 818
 819         /* To indicate add/delete/modify during CCN */
 820         u8 change_detected;
 821 #define RES_CHANGE_ADD          0x1     /* add this to mid-layer */
 822 #define RES_CHANGE_DEL          0x2     /* remove this from mid-layer */
 823
 824         u8 reset_progress;      /* Device is resetting */
 825
 826         /*
 827          * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this
 828          * flag will be set, mid layer will be asked to retry. In the next
 829          * attempt, this flag will be checked in queuecommand() to set
 830          * SYNC_COMPLETE flag in IOARCB (flag_0).
 831          */
 832         u8 sync_reqd;
 833
 834         /* target indicates the mapped target_id assigned to this resource if
 835          * this is VSET resource. For non-VSET resources this will be un-used
 836          * or zero
 837          */
 838         u8 target;
 839 };
 840
 841 /* Data structures used in IOASC error code logging */
 842 struct pmcraid_ioasc_error {
 843         u32 ioasc_code;         /* IOASC code */
 844         u8 log_level;           /* default log level assignment. */
 845         char *error_string;
 846 };
 847
 848 /* Initial log_level assignments for various IOASCs */
 849 #define IOASC_LOG_LEVEL_NONE        0x0 /* no logging */
 850 #define IOASC_LOG_LEVEL_MUST        0x1 /* must log: all high-severity errors */
 851 #define IOASC_LOG_LEVEL_HARD        0x2 /* optional – low severity errors */
 852
 853 /* Error information maintained by LLD. LLD initializes the pmcraid_error_table
 854  * statically.
 855  */
 856 static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 857         {0x01180600, IOASC_LOG_LEVEL_HARD,
 858          "Recovered Error, soft media error, sector reassignment suggested"},
 859         {0x015D0000, IOASC_LOG_LEVEL_HARD,
 860          "Recovered Error, failure prediction threshold exceeded"},
 861         {0x015D9200, IOASC_LOG_LEVEL_HARD,
 862          "Recovered Error, soft Cache Card Battery error threshold"},
 863         {0x015D9200, IOASC_LOG_LEVEL_HARD,
 864          "Recovered Error, soft Cache Card Battery error threshold"},
 865         {0x02048000, IOASC_LOG_LEVEL_HARD,
 866          "Not Ready, IOA Reset Required"},
 867         {0x02408500, IOASC_LOG_LEVEL_HARD,
 868          "Not Ready, IOA microcode download required"},
 869         {0x03110B00, IOASC_LOG_LEVEL_HARD,
 870          "Medium Error, data unreadable, reassignment suggested"},
 871         {0x03110C00, IOASC_LOG_LEVEL_MUST,
 872          "Medium Error, data unreadable do not reassign"},
 873         {0x03310000, IOASC_LOG_LEVEL_HARD,
 874          "Medium Error, media corrupted"},
 875         {0x04050000, IOASC_LOG_LEVEL_HARD,
 876          "Hardware Error, IOA can't communicate with device"},
 877         {0x04080000, IOASC_LOG_LEVEL_MUST,
 878          "Hardware Error, device bus error"},
 879         {0x04088000, IOASC_LOG_LEVEL_MUST,
 880          "Hardware Error, device bus is not functioning"},
 881         {0x04118000, IOASC_LOG_LEVEL_HARD,
 882          "Hardware Error, IOA reserved area data check"},
 883         {0x04118100, IOASC_LOG_LEVEL_HARD,
 884          "Hardware Error, IOA reserved area invalid data pattern"},
 885         {0x04118200, IOASC_LOG_LEVEL_HARD,
 886          "Hardware Error, IOA reserved area LRC error"},
 887         {0x04320000, IOASC_LOG_LEVEL_HARD,
 888          "Hardware Error, reassignment space exhausted"},
 889         {0x04330000, IOASC_LOG_LEVEL_HARD,
 890          "Hardware Error, data transfer underlength error"},
 891         {0x04330000, IOASC_LOG_LEVEL_HARD,
 892          "Hardware Error, data transfer overlength error"},
 893         {0x04418000, IOASC_LOG_LEVEL_MUST,
 894          "Hardware Error, PCI bus error"},
 895         {0x04440000, IOASC_LOG_LEVEL_HARD,
 896          "Hardware Error, device error"},
 897         {0x04448200, IOASC_LOG_LEVEL_MUST,
 898          "Hardware Error, IOA error"},
 899         {0x04448300, IOASC_LOG_LEVEL_HARD,
 900          "Hardware Error, undefined device response"},
 901         {0x04448400, IOASC_LOG_LEVEL_HARD,
 902          "Hardware Error, IOA microcode error"},
 903         {0x04448600, IOASC_LOG_LEVEL_HARD,
 904          "Hardware Error, IOA reset required"},
 905         {0x04449200, IOASC_LOG_LEVEL_HARD,
 906          "Hardware Error, hard Cache Fearuee Card Battery error"},
 907         {0x0444A000, IOASC_LOG_LEVEL_HARD,
 908          "Hardware Error, failed device altered"},
 909         {0x0444A200, IOASC_LOG_LEVEL_HARD,
 910          "Hardware Error, data check after reassignment"},
 911         {0x0444A300, IOASC_LOG_LEVEL_HARD,
 912          "Hardware Error, LRC error after reassignment"},
 913         {0x044A0000, IOASC_LOG_LEVEL_HARD,
 914          "Hardware Error, device bus error (msg/cmd phase)"},
 915         {0x04670400, IOASC_LOG_LEVEL_HARD,
 916          "Hardware Error, new device can't be used"},
 917         {0x04678000, IOASC_LOG_LEVEL_HARD,
 918          "Hardware Error, invalid multiadapter configuration"},
 919         {0x04678100, IOASC_LOG_LEVEL_HARD,
 920          "Hardware Error, incorrect connection between enclosures"},
 921         {0x04678200, IOASC_LOG_LEVEL_HARD,
 922          "Hardware Error, connections exceed IOA design limits"},
 923         {0x04678300, IOASC_LOG_LEVEL_HARD,
 924          "Hardware Error, incorrect multipath connection"},
 925         {0x04679000, IOASC_LOG_LEVEL_HARD,
 926          "Hardware Error, command to LUN failed"},
 927         {0x064C8000, IOASC_LOG_LEVEL_HARD,
 928          "Unit Attention, cache exists for missing/failed device"},
 929         {0x06670100, IOASC_LOG_LEVEL_HARD,
 930          "Unit Attention, incompatible exposed mode device"},
 931         {0x06670600, IOASC_LOG_LEVEL_HARD,
 932          "Unit Attention, attachment of logical unit failed"},
 933         {0x06678000, IOASC_LOG_LEVEL_HARD,
 934          "Unit Attention, cables exceed connective design limit"},
 935         {0x06678300, IOASC_LOG_LEVEL_HARD,
 936          "Unit Attention, incomplete multipath connection between" \
 937          "IOA and enclosure"},
 938         {0x06678400, IOASC_LOG_LEVEL_HARD,
 939          "Unit Attention, incomplete multipath connection between" \
 940          "device and enclosure"},
 941         {0x06678500, IOASC_LOG_LEVEL_HARD,
 942          "Unit Attention, incomplete multipath connection between" \
 943          "IOA and remote IOA"},
 944         {0x06678600, IOASC_LOG_LEVEL_HARD,
 945          "Unit Attention, missing remote IOA"},
 946         {0x06679100, IOASC_LOG_LEVEL_HARD,
 947          "Unit Attention, enclosure doesn't support required multipath" \
 948          "function"},
 949         {0x06698200, IOASC_LOG_LEVEL_HARD,
 950          "Unit Attention, corrupt array parity detected on device"},
 951         {0x066B0200, IOASC_LOG_LEVEL_HARD,
 952          "Unit Attention, array exposed"},
 953         {0x066B8200, IOASC_LOG_LEVEL_HARD,
 954          "Unit Attention, exposed array is still protected"},
 955         {0x066B9200, IOASC_LOG_LEVEL_HARD,
 956          "Unit Attention, Multipath redundancy level got worse"},
 957         {0x07270000, IOASC_LOG_LEVEL_HARD,
 958          "Data Protect, device is read/write protected by IOA"},
 959         {0x07278000, IOASC_LOG_LEVEL_HARD,
 960          "Data Protect, IOA doesn't support device attribute"},
 961         {0x07278100, IOASC_LOG_LEVEL_HARD,
 962          "Data Protect, NVRAM mirroring prohibited"},
 963         {0x07278400, IOASC_LOG_LEVEL_HARD,
 964          "Data Protect, array is short 2 or more devices"},
 965         {0x07278600, IOASC_LOG_LEVEL_HARD,
 966          "Data Protect, exposed array is short a required device"},
 967         {0x07278700, IOASC_LOG_LEVEL_HARD,
 968          "Data Protect, array members not at required addresses"},
 969         {0x07278800, IOASC_LOG_LEVEL_HARD,
 970          "Data Protect, exposed mode device resource address conflict"},
 971         {0x07278900, IOASC_LOG_LEVEL_HARD,
 972          "Data Protect, incorrect resource address of exposed mode device"},
 973         {0x07278A00, IOASC_LOG_LEVEL_HARD,
 974          "Data Protect, Array is missing a device and parity is out of sync"},
 975         {0x07278B00, IOASC_LOG_LEVEL_HARD,
 976          "Data Protect, maximum number of arrays already exist"},
 977         {0x07278C00, IOASC_LOG_LEVEL_HARD,
 978          "Data Protect, cannot locate cache data for device"},
 979         {0x07278D00, IOASC_LOG_LEVEL_HARD,
 980          "Data Protect, cache data exits for a changed device"},
 981         {0x07279100, IOASC_LOG_LEVEL_HARD,
 982          "Data Protect, detection of a device requiring format"},
 983         {0x07279200, IOASC_LOG_LEVEL_HARD,
 984          "Data Protect, IOA exceeds maximum number of devices"},
 985         {0x07279600, IOASC_LOG_LEVEL_HARD,
 986          "Data Protect, missing array, volume set is not functional"},
 987         {0x07279700, IOASC_LOG_LEVEL_HARD,
 988          "Data Protect, single device for a volume set"},
 989         {0x07279800, IOASC_LOG_LEVEL_HARD,
 990          "Data Protect, missing multiple devices for a volume set"},
 991         {0x07279900, IOASC_LOG_LEVEL_HARD,
 992          "Data Protect, maximum number of volument sets already exists"},
 993         {0x07279A00, IOASC_LOG_LEVEL_HARD,
 994          "Data Protect, other volume set problem"},
 995 };
 996
 997 /* macros to help in debugging */
 998 #define pmcraid_err(...)  \
 999         printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
1000
1001 #define pmcraid_info(...) \
1002         if (pmcraid_debug_log) \
1003                 printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
1004
1005 /* check if given command is a SCSI READ or SCSI WRITE command */
1006 #define SCSI_READ_CMD           0x1     /* any of SCSI READ commands */
1007 #define SCSI_WRITE_CMD          0x2     /* any of SCSI WRITE commands */
1008 #define SCSI_CMD_TYPE(opcode) \
1009 ({  u8 op = opcode; u8 __type = 0;\
1010         if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\
1011                 __type = SCSI_READ_CMD;\
1012         else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \
1013                  op == WRITE_16)\
1014                 __type = SCSI_WRITE_CMD;\
1015         __type;\
1016 })
1017
1018 #define IS_SCSI_READ_WRITE(opcode) \
1019 ({      u8 __type = SCSI_CMD_TYPE(opcode); \
1020         (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\
1021 })
1022
1023
1024 /*
1025  * pmcraid_ioctl_header - definition of header structure that precedes all the
1026  * buffers given as ioctl arguments.
1027  *
1028  * .signature           : always ASCII string, "PMCRAID"
1029  * .reserved            : not used
1030  * .buffer_length       : length of the buffer following the header
1031  */
1032 struct pmcraid_ioctl_header {
1033         u8  signature[8];
1034         u32 reserved;
1035         u32 buffer_length;
1036 };
1037
1038 #define PMCRAID_IOCTL_SIGNATURE      "PMCRAID"
1039
1040 /*
1041  * pmcraid_passthrough_ioctl_buffer - structure given as argument to
1042  * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires
1043  * 32-byte alignment so, it is necessary to pack this structure to avoid any
1044  * holes between ioctl_header and passthrough buffer
1045  *
1046  * .ioactl_header : ioctl header
1047  * .ioarcb        : filled-up ioarcb buffer, driver always reads this buffer
1048  * .ioasa         : buffer for ioasa, driver fills this with IOASA from firmware
1049  * .request_buffer: The I/O buffer (flat), driver reads/writes to this based on
1050  *                  the transfer directions passed in ioarcb.flags0. Contents
1051  *                  of this buffer are valid only when ioarcb.data_transfer_len
1052  *                  is not zero.
1053  */
1054 struct pmcraid_passthrough_ioctl_buffer {
1055         struct pmcraid_ioctl_header ioctl_header;
1056         struct pmcraid_ioarcb ioarcb;
1057         struct pmcraid_ioasa  ioasa;
1058         u8  request_buffer[1];
1059 } __attribute__ ((packed));
1060
1061 /*
1062  * keys to differentiate between driver handled IOCTLs and passthrough
1063  * IOCTLs passed to IOA. driver determines the ioctl type using macro
1064  * _IOC_TYPE
1065  */
1066 #define PMCRAID_DRIVER_IOCTL         'D'
1067 #define PMCRAID_PASSTHROUGH_IOCTL    'F'
1068
1069 #define DRV_IOCTL(n, size) \
1070         _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size))
1071
1072 #define FMW_IOCTL(n, size) \
1073         _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_PASSTHROUGH_IOCTL,  (n), (size))
1074
1075 /*
1076  * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd.
1077  * This is to facilitate applications avoiding un-necessary memory allocations.
1078  * For example, most of driver handled ioctls do not require ioarcb, ioasa.
1079  */
1080 #define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg))
1081
1082 /* Driver handled IOCTL command definitions */
1083
1084 #define PMCRAID_IOCTL_RESET_ADAPTER          \
1085         DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header))
1086
1087 /* passthrough/firmware handled commands */
1088 #define PMCRAID_IOCTL_PASSTHROUGH_COMMAND         \
1089         FMW_IOCTL(1, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1090
1091 #define PMCRAID_IOCTL_DOWNLOAD_MICROCODE     \
1092         FMW_IOCTL(2, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1093
1094
1095 #endif /* _PMCRAID_H */