drivers/scsi/bfa/include/defs/bfa_defs_status.h

   1 /*
   2  * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
   3  * All rights reserved
   4  * www.brocade.com
   5  *
   6  * Linux driver for Brocade Fibre Channel Host Bus Adapter.
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of the GNU General Public License (GPL) Version 2 as
  10  * published by the Free Software Foundation
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  */
  17 #ifndef __BFA_DEFS_STATUS_H__
  18 #define __BFA_DEFS_STATUS_H__
  19
  20 /**
  21  * API status return values
  22  *
  23  * NOTE: The error msgs are auto generated from the comments. Only singe line
  24  * comments are supported
  25  */
  26 enum bfa_status {
  27         BFA_STATUS_OK           = 0,    /*  Success */
  28         BFA_STATUS_FAILED       = 1,    /*  Operation failed */
  29         BFA_STATUS_EINVAL       = 2,    /*  Invalid params Check input
  30                                          * parameters */
  31         BFA_STATUS_ENOMEM       = 3,    /*  Out of resources */
  32         BFA_STATUS_ENOSYS       = 4,    /*  Function not implemented */
  33         BFA_STATUS_ETIMER       = 5,    /*  Timer expired - Retry, if
  34                                          * persists, contact support */
  35         BFA_STATUS_EPROTOCOL    = 6,    /*  Protocol error */
  36         BFA_STATUS_ENOFCPORTS   = 7,    /*  No FC ports resources */
  37         BFA_STATUS_NOFLASH      = 8,    /*  Flash not present */
  38         BFA_STATUS_BADFLASH     = 9,    /*  Flash is corrupted or bad */
  39         BFA_STATUS_SFP_UNSUPP   = 10,   /*  Unsupported SFP - Replace SFP */
  40         BFA_STATUS_UNKNOWN_VFID = 11,   /*  VF_ID not found */
  41         BFA_STATUS_DATACORRUPTED = 12,  /*  Diag returned data corrupted
  42                                          * contact support */
  43         BFA_STATUS_DEVBUSY      = 13,   /*  Device busy - Retry operation */
  44         BFA_STATUS_ABORTED      = 14,   /*  Operation aborted */
  45         BFA_STATUS_NODEV        = 15,   /*  Dev is not present */
  46         BFA_STATUS_HDMA_FAILED  = 16,   /*  Host dma failed contact support */
  47         BFA_STATUS_FLASH_BAD_LEN = 17,  /*  Flash bad length */
  48         BFA_STATUS_UNKNOWN_LWWN = 18,   /*  LPORT PWWN not found */
  49         BFA_STATUS_UNKNOWN_RWWN = 19,   /*  RPORT PWWN not found */
  50         BFA_STATUS_FCPT_LS_RJT  = 20,   /*  Got LS_RJT for FC Pass
  51                                          * through Req */
  52         BFA_STATUS_VPORT_EXISTS = 21,   /*  VPORT already exists */
  53         BFA_STATUS_VPORT_MAX    = 22,   /*  Reached max VPORT supported
  54                                          * limit */
  55         BFA_STATUS_UNSUPP_SPEED = 23,   /*  Invalid Speed Check speed
  56                                          * setting */
  57         BFA_STATUS_INVLD_DFSZ   = 24,   /*  Invalid Max data field size */
  58         BFA_STATUS_CNFG_FAILED  = 25,   /*  Setting can not be persisted */
  59         BFA_STATUS_CMD_NOTSUPP  = 26,   /*  Command/API not supported */
  60         BFA_STATUS_NO_ADAPTER   = 27,   /*  No Brocade Adapter Found */
  61         BFA_STATUS_LINKDOWN     = 28,   /*  Link is down - Check or replace
  62                                          * SFP/cable */
  63         BFA_STATUS_FABRIC_RJT   = 29,   /*  Reject from attached fabric */
  64         BFA_STATUS_UNKNOWN_VWWN = 30,   /*  VPORT PWWN not found */
  65         BFA_STATUS_NSLOGIN_FAILED = 31, /*  Nameserver login failed */
  66         BFA_STATUS_NO_RPORTS    = 32,   /*  No remote ports found */
  67         BFA_STATUS_NSQUERY_FAILED = 33, /*  Nameserver query failed */
  68         BFA_STATUS_PORT_OFFLINE = 34,   /*  Port is not online */
  69         BFA_STATUS_RPORT_OFFLINE = 35,  /*  RPORT is not online */
  70         BFA_STATUS_TGTOPEN_FAILED = 36, /*  Remote SCSI target open failed */
  71         BFA_STATUS_BAD_LUNS     = 37,   /*  No valid LUNs found */
  72         BFA_STATUS_IO_FAILURE   = 38,   /*  SCSI target IO failure */
  73         BFA_STATUS_NO_FABRIC    = 39,   /*  No switched fabric present */
  74         BFA_STATUS_EBADF        = 40,   /*  Bad file descriptor */
  75         BFA_STATUS_EINTR        = 41,   /*  A signal was caught during ioctl */
  76         BFA_STATUS_EIO          = 42,   /*  I/O error */
  77         BFA_STATUS_ENOTTY       = 43,   /*  Inappropriate I/O control
  78                                          * operation */
  79         BFA_STATUS_ENXIO        = 44,   /*  No such device or address */
  80         BFA_STATUS_EFOPEN       = 45,   /*  Failed to open file */
  81         BFA_STATUS_VPORT_WWN_BP = 46,   /*  WWN is same as base port's WWN */
  82         BFA_STATUS_PORT_NOT_DISABLED = 47, /*  Port not disabled disable port
  83                                             * first */
  84         BFA_STATUS_BADFRMHDR    = 48,   /*  Bad frame header */
  85         BFA_STATUS_BADFRMSZ     = 49,   /*  Bad frame size check and replace
  86                                          * SFP/cable */
  87         BFA_STATUS_MISSINGFRM   = 50,   /*  Missing frame check and replace
  88                                          * SFP/cable */
  89         BFA_STATUS_LINKTIMEOUT  = 51,   /*  Link timeout check and replace
  90                                          * SFP/cable */
  91         BFA_STATUS_NO_FCPIM_NEXUS = 52, /*  No FCP Nexus exists with the
  92                                          * rport */
  93         BFA_STATUS_CHECKSUM_FAIL = 53,  /*  checksum failure */
  94         BFA_STATUS_GZME_FAILED  = 54,   /*  Get zone member query failed */
  95         BFA_STATUS_SCSISTART_REQD = 55, /*  SCSI disk require START command */
  96         BFA_STATUS_IOC_FAILURE  = 56,   /*  IOC failure - Retry, if persists
  97                                          * contact support */
  98         BFA_STATUS_INVALID_WWN  = 57,   /*  Invalid WWN */
  99         BFA_STATUS_MISMATCH     = 58,   /*  Version mismatch */
 100         BFA_STATUS_IOC_ENABLED  = 59,   /*  IOC is already enabled */
 101         BFA_STATUS_ADAPTER_ENABLED = 60, /*  Adapter is not disabled disable
 102                                           * adapter first */
 103         BFA_STATUS_IOC_NON_OP   = 61,   /*  IOC is not operational. Enable IOC
 104                                          * and if it still fails,
 105                                          * contact support */
 106         BFA_STATUS_ADDR_MAP_FAILURE = 62, /*  PCI base address not mapped
 107                                            * in OS */
 108         BFA_STATUS_SAME_NAME    = 63,   /*  Name exists! use a different
 109                                          * name */
 110         BFA_STATUS_PENDING      = 64,   /*  API completes asynchronously */
 111         BFA_STATUS_8G_SPD       = 65,   /*  Speed setting not valid for
 112                                          * 8G HBA */
 113         BFA_STATUS_4G_SPD       = 66,   /*  Speed setting not valid for
 114                                          * 4G HBA */
 115         BFA_STATUS_AD_IS_ENABLE = 67,   /*  Adapter is already enabled */
 116         BFA_STATUS_EINVAL_TOV   = 68,   /*  Invalid path failover TOV */
 117         BFA_STATUS_EINVAL_QDEPTH = 69,  /*  Invalid queue depth value */
 118         BFA_STATUS_VERSION_FAIL = 70,   /*  Application/Driver version
 119                                          * mismatch */
 120         BFA_STATUS_DIAG_BUSY    = 71,   /*  diag busy */
 121         BFA_STATUS_BEACON_ON    = 72,   /*  Port Beacon already on */
 122         BFA_STATUS_BEACON_OFF   = 73,   /*  Port Beacon already off */
 123         BFA_STATUS_LBEACON_ON   = 74,   /*  Link End-to-End Beacon already
 124                                          * on */
 125         BFA_STATUS_LBEACON_OFF  = 75,   /*  Link End-to-End Beacon already
 126                                          * off */
 127         BFA_STATUS_PORT_NOT_INITED = 76, /*  Port not initialized */
 128         BFA_STATUS_RPSC_ENABLED = 77, /*  Target has a valid speed */
 129         BFA_STATUS_ENOFSAVE = 78,       /*  No saved firmware trace */
 130         BFA_STATUS_BAD_FILE = 79,       /*  Not a valid Brocade Boot Code
 131                                          * file */
 132         BFA_STATUS_RLIM_EN = 80,        /*  Target rate limiting is already
 133                                          * enabled */
 134         BFA_STATUS_RLIM_DIS = 81,  /*  Target rate limiting is already
 135                                     * disabled */
 136         BFA_STATUS_IOC_DISABLED = 82,   /*  IOC is already disabled */
 137         BFA_STATUS_ADAPTER_DISABLED = 83,   /*  Adapter is already disabled */
 138         BFA_STATUS_BIOS_DISABLED = 84,   /*  Bios is already disabled */
 139         BFA_STATUS_AUTH_ENABLED = 85,   /*  Authentication is already
 140                                          * enabled */
 141         BFA_STATUS_AUTH_DISABLED = 86,   /*  Authentication is already
 142                                          * disabled */
 143         BFA_STATUS_ERROR_TRL_ENABLED = 87,   /*  Target rate limiting is
 144                                               * enabled */
 145         BFA_STATUS_ERROR_QOS_ENABLED = 88,   /*  QoS is enabled */
 146         BFA_STATUS_NO_SFP_DEV = 89, /*  No SFP device check or replace SFP */
 147         BFA_STATUS_MEMTEST_FAILED = 90, /*  Memory test failed contact
 148                                          * support */
 149         BFA_STATUS_INVALID_DEVID = 91,  /*  Invalid device id provided */
 150         BFA_STATUS_QOS_ENABLED = 92, /*  QOS is already enabled */
 151         BFA_STATUS_QOS_DISABLED = 93, /*  QOS is already disabled */
 152         BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /*  Check configuration
 153                                                * key/value pair */
 154         BFA_STATUS_REG_FAIL = 95, /*  Can't read windows registry */
 155         BFA_STATUS_IM_INV_CODE = 96, /*  Invalid IOCTL code */
 156         BFA_STATUS_IM_INV_VLAN = 97, /*  Invalid VLAN ID */
 157         BFA_STATUS_IM_INV_ADAPT_NAME = 98, /*  Invalid adapter name */
 158         BFA_STATUS_IM_LOW_RESOURCES = 99, /*  Memory allocation failure in
 159                                            * driver */
 160         BFA_STATUS_IM_VLANID_IS_PVID = 100, /*  Given VLAN id same as PVID */
 161         BFA_STATUS_IM_VLANID_EXISTS = 101, /*  Given VLAN id already exists */
 162         BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /*  Updating firmware with new
 163                                              * VLAN ID failed */
 164         BFA_STATUS_PORTLOG_ENABLED = 103, /*  Port Log is already enabled */
 165         BFA_STATUS_PORTLOG_DISABLED = 104, /*  Port Log is already disabled */
 166         BFA_STATUS_FILE_NOT_FOUND = 105, /*  Specified file could not be
 167                                           * found */
 168         BFA_STATUS_QOS_FC_ONLY = 106, /*  QOS can be enabled for FC mode
 169                                        * only */
 170         BFA_STATUS_RLIM_FC_ONLY = 107, /*  RATELIM can be enabled for FC mode
 171                                         * only */
 172         BFA_STATUS_CT_SPD = 108, /*  Invalid speed selection for Catapult. */
 173         BFA_STATUS_LEDTEST_OP = 109, /*  LED test is operating */
 174         BFA_STATUS_CEE_NOT_DN = 110, /*  eth port is not at down state, please
 175                                       * bring down first */
 176         BFA_STATUS_10G_SPD = 111, /*  Speed setting not valid for 10G HBA */
 177         BFA_STATUS_IM_INV_TEAM_NAME = 112, /*  Invalid team name */
 178         BFA_STATUS_IM_DUP_TEAM_NAME = 113, /*  Given team name already
 179                                             * exists */
 180         BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /*  Given adapter is part
 181                                                     * of another team */
 182         BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /*  Adapter has VLANs configured.
 183                                               * Delete all VLANs before
 184                                               * creating team */
 185         BFA_STATUS_IM_PVID_MISMATCH = 116, /*  Mismatching PVIDs configured
 186                                             * for adapters */
 187         BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /*  Mismatching link speeds
 188                                                   * configured for adapters */
 189         BFA_STATUS_IM_MTU_MISMATCH = 118, /*  Mismatching MTUs configured for
 190                                            * adapters */
 191         BFA_STATUS_IM_RSS_MISMATCH = 119, /*  Mismatching RSS parameters
 192                                            * configured for adapters */
 193         BFA_STATUS_IM_HDS_MISMATCH = 120, /*  Mismatching HDS parameters
 194                                            * configured for adapters */
 195         BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /*  Mismatching offload
 196                                                * parameters configured for
 197                                                * adapters */
 198         BFA_STATUS_IM_PORT_PARAMS = 122, /*  Error setting port parameters */
 199         BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /*  Port is not part of team */
 200         BFA_STATUS_IM_CANNOT_REM_PRI = 124, /*  Primary adapter cannot be
 201                                              * removed. Change primary before
 202                                              * removing */
 203         BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /*  Exceeding maximum ports
 204                                                 * per team */
 205         BFA_STATUS_IM_LAST_PORT_DELETE = 126, /*  Last port in team being
 206                                                * deleted */
 207         BFA_STATUS_IM_NO_DRIVER = 127, /*  IM driver is not installed */
 208         BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /*  Exceeding maximum VLANs
 209                                                 * per port */
 210         BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
 211                                                   * allowed for CNA */
 212         BFA_STATUS_NO_MINPORT_DRIVER = 130, /*  Miniport driver is not
 213                                              * loaded */
 214         BFA_STATUS_CARD_TYPE_MISMATCH = 131, /*  Card type mismatch */
 215         BFA_STATUS_BAD_ASICBLK = 132, /*  Bad ASIC block */
 216         BFA_STATUS_NO_DRIVER = 133, /*  Storage/Ethernet driver not loaded */
 217         BFA_STATUS_INVALID_MAC = 134, /*  Invalid mac address */
 218         BFA_STATUS_IM_NO_VLAN = 135, /*  No VLANs configured on the adapter */
 219         BFA_STATUS_IM_ETH_LB_FAILED = 136, /*  Ethernet loopback test failed */
 220         BFA_STATUS_IM_PVID_REMOVE = 137, /*  Cannot remove port vlan (PVID) */
 221         BFA_STATUS_IM_PVID_EDIT = 138, /*  Cannot edit port vlan (PVID) */
 222         BFA_STATUS_CNA_NO_BOOT = 139, /*  Boot upload not allowed for CNA */
 223         BFA_STATUS_IM_PVID_NON_ZERO = 140, /*  Port VLAN ID (PVID) is Set to
 224                                             * Non-Zero Value */
 225         BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /*  Acquiring Network
 226                                                   * Subsytem Lock Failed.Please
 227                                                   * try after some time */
 228         BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /*  Acquiring Network Subsytem
 229                                                  * handle Failed. Please try
 230                                                  * after some time */
 231         BFA_STATUS_IM_NOT_BOUND = 143, /*  Brocade 10G Ethernet Service is not
 232                                         * Enabled on this port */
 233         BFA_STATUS_INSUFFICIENT_PERMS = 144, /*  User doesn't have sufficient
 234                                               * permissions to execute the BCU
 235                                               * application */
 236         BFA_STATUS_IM_INV_VLAN_NAME = 145, /*  Invalid/Reserved Vlan name
 237                                             * string. The name is not allowed
 238                                             * for the normal Vlans */
 239         BFA_STATUS_CMD_NOTSUPP_CNA = 146, /*  Command not supported for CNA */
 240         BFA_STATUS_IM_PASSTHRU_EDIT = 147, /*  Can not edit passthru vlan id */
 241         BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation
 242                                           * failed */
 243         BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
 244                                             * failed */
 245         BFA_STATUS_MAX_VAL              /*  Unknown error code */
 246 };
 247 #define bfa_status_t enum bfa_status
 248
 249 enum bfa_eproto_status {
 250         BFA_EPROTO_BAD_ACCEPT = 0,
 251         BFA_EPROTO_UNKNOWN_RSP = 1
 252 };
 253 #define bfa_eproto_status_t enum bfa_eproto_status
 254
 255 #endif /* __BFA_DEFS_STATUS_H__ */