scatterlist: sg_set_buf() argument must be in linear mapping
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / rtc / rtc-twl.c
1 /*
2 * rtc-twl.c -- TWL Real Time Clock interface
3 *
4 * Copyright (C) 2007 MontaVista Software, Inc
5 * Author: Alexandre Rusev <source@mvista.com>
6 *
7 * Based on original TI driver twl4030-rtc.c
8 * Copyright (C) 2006 Texas Instruments, Inc.
9 *
10 * Based on rtc-omap.c
11 * Copyright (C) 2003 MontaVista Software, Inc.
12 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13 * Copyright (C) 2006 David Brownell
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 */
20
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/types.h>
26 #include <linux/rtc.h>
27 #include <linux/bcd.h>
28 #include <linux/platform_device.h>
29 #include <linux/interrupt.h>
30 #include <linux/of.h>
31
32 #include <linux/i2c/twl.h>
33
34
35 /*
36 * RTC block register offsets (use TWL_MODULE_RTC)
37 */
38 enum {
39 REG_SECONDS_REG = 0,
40 REG_MINUTES_REG,
41 REG_HOURS_REG,
42 REG_DAYS_REG,
43 REG_MONTHS_REG,
44 REG_YEARS_REG,
45 REG_WEEKS_REG,
46
47 REG_ALARM_SECONDS_REG,
48 REG_ALARM_MINUTES_REG,
49 REG_ALARM_HOURS_REG,
50 REG_ALARM_DAYS_REG,
51 REG_ALARM_MONTHS_REG,
52 REG_ALARM_YEARS_REG,
53
54 REG_RTC_CTRL_REG,
55 REG_RTC_STATUS_REG,
56 REG_RTC_INTERRUPTS_REG,
57
58 REG_RTC_COMP_LSB_REG,
59 REG_RTC_COMP_MSB_REG,
60 };
61 static const u8 twl4030_rtc_reg_map[] = {
62 [REG_SECONDS_REG] = 0x00,
63 [REG_MINUTES_REG] = 0x01,
64 [REG_HOURS_REG] = 0x02,
65 [REG_DAYS_REG] = 0x03,
66 [REG_MONTHS_REG] = 0x04,
67 [REG_YEARS_REG] = 0x05,
68 [REG_WEEKS_REG] = 0x06,
69
70 [REG_ALARM_SECONDS_REG] = 0x07,
71 [REG_ALARM_MINUTES_REG] = 0x08,
72 [REG_ALARM_HOURS_REG] = 0x09,
73 [REG_ALARM_DAYS_REG] = 0x0A,
74 [REG_ALARM_MONTHS_REG] = 0x0B,
75 [REG_ALARM_YEARS_REG] = 0x0C,
76
77 [REG_RTC_CTRL_REG] = 0x0D,
78 [REG_RTC_STATUS_REG] = 0x0E,
79 [REG_RTC_INTERRUPTS_REG] = 0x0F,
80
81 [REG_RTC_COMP_LSB_REG] = 0x10,
82 [REG_RTC_COMP_MSB_REG] = 0x11,
83 };
84 static const u8 twl6030_rtc_reg_map[] = {
85 [REG_SECONDS_REG] = 0x00,
86 [REG_MINUTES_REG] = 0x01,
87 [REG_HOURS_REG] = 0x02,
88 [REG_DAYS_REG] = 0x03,
89 [REG_MONTHS_REG] = 0x04,
90 [REG_YEARS_REG] = 0x05,
91 [REG_WEEKS_REG] = 0x06,
92
93 [REG_ALARM_SECONDS_REG] = 0x08,
94 [REG_ALARM_MINUTES_REG] = 0x09,
95 [REG_ALARM_HOURS_REG] = 0x0A,
96 [REG_ALARM_DAYS_REG] = 0x0B,
97 [REG_ALARM_MONTHS_REG] = 0x0C,
98 [REG_ALARM_YEARS_REG] = 0x0D,
99
100 [REG_RTC_CTRL_REG] = 0x10,
101 [REG_RTC_STATUS_REG] = 0x11,
102 [REG_RTC_INTERRUPTS_REG] = 0x12,
103
104 [REG_RTC_COMP_LSB_REG] = 0x13,
105 [REG_RTC_COMP_MSB_REG] = 0x14,
106 };
107
108 /* RTC_CTRL_REG bitfields */
109 #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
110 #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
111 #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
112 #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
113 #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
114 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
115 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
116 #define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80
117
118 /* RTC_STATUS_REG bitfields */
119 #define BIT_RTC_STATUS_REG_RUN_M 0x02
120 #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
121 #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
122 #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
123 #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
124 #define BIT_RTC_STATUS_REG_ALARM_M 0x40
125 #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
126
127 /* RTC_INTERRUPTS_REG bitfields */
128 #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
129 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
130 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
131
132
133 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
134 #define ALL_TIME_REGS 6
135
136 /*----------------------------------------------------------------------*/
137 static u8 *rtc_reg_map;
138
139 /*
140 * Supports 1 byte read from TWL RTC register.
141 */
142 static int twl_rtc_read_u8(u8 *data, u8 reg)
143 {
144 int ret;
145
146 ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
147 if (ret < 0)
148 pr_err("twl_rtc: Could not read TWL"
149 "register %X - error %d\n", reg, ret);
150 return ret;
151 }
152
153 /*
154 * Supports 1 byte write to TWL RTC registers.
155 */
156 static int twl_rtc_write_u8(u8 data, u8 reg)
157 {
158 int ret;
159
160 ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
161 if (ret < 0)
162 pr_err("twl_rtc: Could not write TWL"
163 "register %X - error %d\n", reg, ret);
164 return ret;
165 }
166
167 /*
168 * Cache the value for timer/alarm interrupts register; this is
169 * only changed by callers holding rtc ops lock (or resume).
170 */
171 static unsigned char rtc_irq_bits;
172
173 /*
174 * Enable 1/second update and/or alarm interrupts.
175 */
176 static int set_rtc_irq_bit(unsigned char bit)
177 {
178 unsigned char val;
179 int ret;
180
181 /* if the bit is set, return from here */
182 if (rtc_irq_bits & bit)
183 return 0;
184
185 val = rtc_irq_bits | bit;
186 val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
187 ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
188 if (ret == 0)
189 rtc_irq_bits = val;
190
191 return ret;
192 }
193
194 /*
195 * Disable update and/or alarm interrupts.
196 */
197 static int mask_rtc_irq_bit(unsigned char bit)
198 {
199 unsigned char val;
200 int ret;
201
202 /* if the bit is clear, return from here */
203 if (!(rtc_irq_bits & bit))
204 return 0;
205
206 val = rtc_irq_bits & ~bit;
207 ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
208 if (ret == 0)
209 rtc_irq_bits = val;
210
211 return ret;
212 }
213
214 static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
215 {
216 int ret;
217
218 if (enabled)
219 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
220 else
221 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
222
223 return ret;
224 }
225
226 /*
227 * Gets current TWL RTC time and date parameters.
228 *
229 * The RTC's time/alarm representation is not what gmtime(3) requires
230 * Linux to use:
231 *
232 * - Months are 1..12 vs Linux 0-11
233 * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
234 */
235 static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
236 {
237 unsigned char rtc_data[ALL_TIME_REGS];
238 int ret;
239 u8 save_control;
240 u8 rtc_control;
241
242 ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
243 if (ret < 0) {
244 dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret);
245 return ret;
246 }
247 /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */
248 if (twl_class_is_6030()) {
249 if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) {
250 save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M;
251 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
252 if (ret < 0) {
253 dev_err(dev, "%s clr GET_TIME, error %d\n",
254 __func__, ret);
255 return ret;
256 }
257 }
258 }
259
260 /* Copy RTC counting registers to static registers or latches */
261 rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M;
262
263 /* for twl6030/32 enable read access to static shadowed registers */
264 if (twl_class_is_6030())
265 rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT;
266
267 ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG);
268 if (ret < 0) {
269 dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret);
270 return ret;
271 }
272
273 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
274 (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
275
276 if (ret < 0) {
277 dev_err(dev, "%s: reading data, error %d\n", __func__, ret);
278 return ret;
279 }
280
281 /* for twl6030 restore original state of rtc control register */
282 if (twl_class_is_6030()) {
283 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
284 if (ret < 0) {
285 dev_err(dev, "%s: restore CTRL_REG, error %d\n",
286 __func__, ret);
287 return ret;
288 }
289 }
290
291 tm->tm_sec = bcd2bin(rtc_data[0]);
292 tm->tm_min = bcd2bin(rtc_data[1]);
293 tm->tm_hour = bcd2bin(rtc_data[2]);
294 tm->tm_mday = bcd2bin(rtc_data[3]);
295 tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
296 tm->tm_year = bcd2bin(rtc_data[5]) + 100;
297
298 return ret;
299 }
300
301 static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
302 {
303 unsigned char save_control;
304 unsigned char rtc_data[ALL_TIME_REGS];
305 int ret;
306
307 rtc_data[0] = bin2bcd(tm->tm_sec);
308 rtc_data[1] = bin2bcd(tm->tm_min);
309 rtc_data[2] = bin2bcd(tm->tm_hour);
310 rtc_data[3] = bin2bcd(tm->tm_mday);
311 rtc_data[4] = bin2bcd(tm->tm_mon + 1);
312 rtc_data[5] = bin2bcd(tm->tm_year - 100);
313
314 /* Stop RTC while updating the TC registers */
315 ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
316 if (ret < 0)
317 goto out;
318
319 save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
320 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
321 if (ret < 0)
322 goto out;
323
324 /* update all the time registers in one shot */
325 ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
326 (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
327 if (ret < 0) {
328 dev_err(dev, "rtc_set_time error %d\n", ret);
329 goto out;
330 }
331
332 /* Start back RTC */
333 save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
334 ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
335
336 out:
337 return ret;
338 }
339
340 /*
341 * Gets current TWL RTC alarm time.
342 */
343 static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
344 {
345 unsigned char rtc_data[ALL_TIME_REGS];
346 int ret;
347
348 ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
349 (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
350 if (ret < 0) {
351 dev_err(dev, "rtc_read_alarm error %d\n", ret);
352 return ret;
353 }
354
355 /* some of these fields may be wildcard/"match all" */
356 alm->time.tm_sec = bcd2bin(rtc_data[0]);
357 alm->time.tm_min = bcd2bin(rtc_data[1]);
358 alm->time.tm_hour = bcd2bin(rtc_data[2]);
359 alm->time.tm_mday = bcd2bin(rtc_data[3]);
360 alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
361 alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
362
363 /* report cached alarm enable state */
364 if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
365 alm->enabled = 1;
366
367 return ret;
368 }
369
370 static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
371 {
372 unsigned char alarm_data[ALL_TIME_REGS];
373 int ret;
374
375 ret = twl_rtc_alarm_irq_enable(dev, 0);
376 if (ret)
377 goto out;
378
379 alarm_data[0] = bin2bcd(alm->time.tm_sec);
380 alarm_data[1] = bin2bcd(alm->time.tm_min);
381 alarm_data[2] = bin2bcd(alm->time.tm_hour);
382 alarm_data[3] = bin2bcd(alm->time.tm_mday);
383 alarm_data[4] = bin2bcd(alm->time.tm_mon + 1);
384 alarm_data[5] = bin2bcd(alm->time.tm_year - 100);
385
386 /* update all the alarm registers in one shot */
387 ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
388 (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
389 if (ret) {
390 dev_err(dev, "rtc_set_alarm error %d\n", ret);
391 goto out;
392 }
393
394 if (alm->enabled)
395 ret = twl_rtc_alarm_irq_enable(dev, 1);
396 out:
397 return ret;
398 }
399
400 static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
401 {
402 unsigned long events;
403 int ret = IRQ_NONE;
404 int res;
405 u8 rd_reg;
406
407 res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
408 if (res)
409 goto out;
410 /*
411 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
412 * only one (ALARM or RTC) interrupt source may be enabled
413 * at time, we also could check our results
414 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
415 */
416 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
417 events = RTC_IRQF | RTC_AF;
418 else
419 events = RTC_IRQF | RTC_PF;
420
421 res = twl_rtc_write_u8(BIT_RTC_STATUS_REG_ALARM_M,
422 REG_RTC_STATUS_REG);
423 if (res)
424 goto out;
425
426 if (twl_class_is_4030()) {
427 /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
428 * needs 2 reads to clear the interrupt. One read is done in
429 * do_twl_pwrirq(). Doing the second read, to clear
430 * the bit.
431 *
432 * FIXME the reason PWR_ISR1 needs an extra read is that
433 * RTC_IF retriggered until we cleared REG_ALARM_M above.
434 * But re-reading like this is a bad hack; by doing so we
435 * risk wrongly clearing status for some other IRQ (losing
436 * the interrupt). Be smarter about handling RTC_UF ...
437 */
438 res = twl_i2c_read_u8(TWL4030_MODULE_INT,
439 &rd_reg, TWL4030_INT_PWR_ISR1);
440 if (res)
441 goto out;
442 }
443
444 /* Notify RTC core on event */
445 rtc_update_irq(rtc, 1, events);
446
447 ret = IRQ_HANDLED;
448 out:
449 return ret;
450 }
451
452 static struct rtc_class_ops twl_rtc_ops = {
453 .read_time = twl_rtc_read_time,
454 .set_time = twl_rtc_set_time,
455 .read_alarm = twl_rtc_read_alarm,
456 .set_alarm = twl_rtc_set_alarm,
457 .alarm_irq_enable = twl_rtc_alarm_irq_enable,
458 };
459
460 /*----------------------------------------------------------------------*/
461
462 static int twl_rtc_probe(struct platform_device *pdev)
463 {
464 struct rtc_device *rtc;
465 int ret = -EINVAL;
466 int irq = platform_get_irq(pdev, 0);
467 u8 rd_reg;
468
469 if (irq <= 0)
470 goto out1;
471
472 ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
473 if (ret < 0)
474 goto out1;
475
476 if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
477 dev_warn(&pdev->dev, "Power up reset detected.\n");
478
479 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
480 dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
481
482 /* Clear RTC Power up reset and pending alarm interrupts */
483 ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
484 if (ret < 0)
485 goto out1;
486
487 if (twl_class_is_6030()) {
488 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
489 REG_INT_MSK_LINE_A);
490 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
491 REG_INT_MSK_STS_A);
492 }
493
494 dev_info(&pdev->dev, "Enabling TWL-RTC\n");
495 ret = twl_rtc_write_u8(BIT_RTC_CTRL_REG_STOP_RTC_M, REG_RTC_CTRL_REG);
496 if (ret < 0)
497 goto out1;
498
499 /* ensure interrupts are disabled, bootloaders can be strange */
500 ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
501 if (ret < 0)
502 dev_warn(&pdev->dev, "unable to disable interrupt\n");
503
504 /* init cached IRQ enable bits */
505 ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
506 if (ret < 0)
507 goto out1;
508
509 rtc = rtc_device_register(pdev->name,
510 &pdev->dev, &twl_rtc_ops, THIS_MODULE);
511 if (IS_ERR(rtc)) {
512 ret = PTR_ERR(rtc);
513 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
514 PTR_ERR(rtc));
515 goto out1;
516 }
517
518 ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
519 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
520 dev_name(&rtc->dev), rtc);
521 if (ret < 0) {
522 dev_err(&pdev->dev, "IRQ is not free.\n");
523 goto out2;
524 }
525
526 platform_set_drvdata(pdev, rtc);
527 return 0;
528
529 out2:
530 rtc_device_unregister(rtc);
531 out1:
532 return ret;
533 }
534
535 /*
536 * Disable all TWL RTC module interrupts.
537 * Sets status flag to free.
538 */
539 static int twl_rtc_remove(struct platform_device *pdev)
540 {
541 /* leave rtc running, but disable irqs */
542 struct rtc_device *rtc = platform_get_drvdata(pdev);
543 int irq = platform_get_irq(pdev, 0);
544
545 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
546 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
547 if (twl_class_is_6030()) {
548 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
549 REG_INT_MSK_LINE_A);
550 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
551 REG_INT_MSK_STS_A);
552 }
553
554
555 free_irq(irq, rtc);
556
557 rtc_device_unregister(rtc);
558 platform_set_drvdata(pdev, NULL);
559 return 0;
560 }
561
562 static void twl_rtc_shutdown(struct platform_device *pdev)
563 {
564 /* mask timer interrupts, but leave alarm interrupts on to enable
565 power-on when alarm is triggered */
566 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
567 }
568
569 #ifdef CONFIG_PM_SLEEP
570 static unsigned char irqstat;
571
572 static int twl_rtc_suspend(struct device *dev)
573 {
574 irqstat = rtc_irq_bits;
575
576 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
577 return 0;
578 }
579
580 static int twl_rtc_resume(struct device *dev)
581 {
582 set_rtc_irq_bit(irqstat);
583 return 0;
584 }
585 #endif
586
587 static SIMPLE_DEV_PM_OPS(twl_rtc_pm_ops, twl_rtc_suspend, twl_rtc_resume);
588
589 #ifdef CONFIG_OF
590 static const struct of_device_id twl_rtc_of_match[] = {
591 {.compatible = "ti,twl4030-rtc", },
592 { },
593 };
594 MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
595 #endif
596
597 MODULE_ALIAS("platform:twl_rtc");
598
599 static struct platform_driver twl4030rtc_driver = {
600 .probe = twl_rtc_probe,
601 .remove = twl_rtc_remove,
602 .shutdown = twl_rtc_shutdown,
603 .driver = {
604 .owner = THIS_MODULE,
605 .name = "twl_rtc",
606 .pm = &twl_rtc_pm_ops,
607 .of_match_table = of_match_ptr(twl_rtc_of_match),
608 },
609 };
610
611 static int __init twl_rtc_init(void)
612 {
613 if (twl_class_is_4030())
614 rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
615 else
616 rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
617
618 return platform_driver_register(&twl4030rtc_driver);
619 }
620 module_init(twl_rtc_init);
621
622 static void __exit twl_rtc_exit(void)
623 {
624 platform_driver_unregister(&twl4030rtc_driver);
625 }
626 module_exit(twl_rtc_exit);
627
628 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
629 MODULE_LICENSE("GPL");