drivers/parport/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/kconfig-language.txt.
   4 #
   5 # Parport configuration.
   6 #
   7
   8 menuconfig PARPORT
   9         tristate "Parallel port support"
  10         depends on HAS_IOMEM
  11         ---help---
  12           If you want to use devices connected to your machine's parallel port
  13           (the connector at the computer with 25 holes), e.g. printer, ZIP
  14           drive, PLIP link (Parallel Line Internet Protocol is mainly used to
  15           create a mini network by connecting the parallel ports of two local
  16           machines) etc., then you need to say Y here; please read
  17           <file:Documentation/parport.txt> and
  18           <file:drivers/parport/BUGS-parport>.
  19
  20           For extensive information about drivers for many devices attaching
  21           to the parallel port see <http://www.torque.net/linux-pp.html> on
  22           the WWW.
  23
  24           It is possible to share a single parallel port among several devices
  25           and it is safe to compile all the corresponding drivers into the
  26           kernel. To compile parallel port support as a module, choose M here:
  27           the module will be called parport.
  28           If you have more than one parallel port and want to specify which
  29           port and IRQ to be used by this driver at module load time, take a
  30           look at <file:Documentation/parport.txt>.
  31
  32           If unsure, say Y.
  33
  34 if PARPORT
  35
  36 config PARPORT_PC
  37         tristate "PC-style hardware"
  38         depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
  39                 (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && !XTENSA
  40         ---help---
  41           You should say Y here if you have a PC-style parallel port. All
  42           IBM PC compatible computers and some Alphas have PC-style
  43           parallel ports.  PA-RISC owners should only say Y here if they
  44           have a SuperIO parallel port.
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called parport_pc.
  48
  49           If unsure, say Y.
  50
  51 config PARPORT_SERIAL
  52         tristate "Multi-IO cards (parallel and serial)"
  53         depends on SERIAL_8250_PCI && PARPORT_PC && PCI
  54         help
  55           This adds support for multi-IO PCI cards that have parallel and
  56           serial ports.  You should say Y or M here.  If you say M, the module
  57           will be called parport_serial.
  58
  59 config PARPORT_PC_FIFO
  60         bool "Use FIFO/DMA if available"
  61         depends on PARPORT_PC
  62         help
  63           Many parallel port chipsets provide hardware that can speed up
  64           printing. Say Y here if you want to take advantage of that.
  65
  66           As well as actually having a FIFO, or DMA capability, the kernel
  67           will need to know which IRQ the parallel port has.  By default,
  68           parallel port interrupts will not be used, and so neither will the
  69           FIFO.  See <file:Documentation/parport.txt> to find out how to
  70           specify which IRQ/DMA to use.
  71
  72 config PARPORT_PC_SUPERIO
  73         bool "SuperIO chipset support"
  74         depends on PARPORT_PC && !PARISC
  75         help
  76           Saying Y here enables some probes for Super-IO chipsets in order to
  77           find out things like base addresses, IRQ lines and DMA channels.  It
  78           is safe to say N.
  79
  80 config PARPORT_PC_PCMCIA
  81         tristate "Support for PCMCIA management for PC-style ports"
  82         depends on PCMCIA && PARPORT_PC
  83         help
  84           Say Y here if you need PCMCIA support for your PC-style parallel
  85           ports. If unsure, say N.
  86
  87 config PARPORT_IP32
  88         tristate "SGI IP32 builtin port"
  89         depends on SGI_IP32
  90         select PARPORT_NOT_PC
  91         help
  92           Say Y here if you need support for the parallel port on
  93           SGI O2 machines. This code is also available as a module (say M),
  94           called parport_ip32.  If in doubt, saying N is the safe plan.
  95
  96 config PARPORT_AMIGA
  97         tristate "Amiga builtin port"
  98         depends on AMIGA
  99         select PARPORT_NOT_PC
 100         help
 101           Say Y here if you need support for the parallel port hardware on
 102           Amiga machines. This code is also available as a module (say M),
 103           called parport_amiga. If in doubt, saying N is the safe plan.
 104
 105 config PARPORT_MFC3
 106         tristate "Multiface III parallel port"
 107         depends on ZORRO
 108         select PARPORT_NOT_PC
 109         help
 110           Say Y here if you need parallel port support for the MFC3 card.
 111           This code is also available as a module (say M), called
 112           parport_mfc3. If in doubt, saying N is the safe plan.
 113
 114 config PARPORT_ATARI
 115         tristate "Atari hardware"
 116         depends on ATARI
 117         select PARPORT_NOT_PC
 118         help
 119           Say Y here if you need support for the parallel port hardware on
 120           Atari machines. This code is also available as a module (say M),
 121           called parport_atari. If in doubt, saying N is the safe plan.
 122
 123 config PARPORT_GSC
 124         tristate
 125         default GSC
 126         select PARPORT_NOT_PC
 127
 128 config PARPORT_SUNBPP
 129         tristate "Sparc hardware"
 130         depends on SBUS
 131         select PARPORT_NOT_PC
 132         help
 133           This driver provides support for the bidirectional parallel port
 134           found on many Sun machines. Note that many of the newer Ultras
 135           actually have pc style hardware instead.
 136
 137 config PARPORT_AX88796
 138         tristate "AX88796 Parallel Port"
 139         select PARPORT_NOT_PC
 140         help
 141           Say Y here if you need support for the parallel port hardware on
 142           the AX88796 network controller chip. This code is also available
 143           as a module (say M), called parport_ax88796.
 144
 145           The driver is not dependent on the AX88796 network driver, and
 146           should not interfere with the networking functions of the chip.
 147
 148 config PARPORT_1284
 149         bool "IEEE 1284 transfer modes"
 150         help
 151           If you have a printer that supports status readback or device ID, or
 152           want to use a device that uses enhanced parallel port transfer modes
 153           such as EPP and ECP, say Y here to enable advanced IEEE 1284
 154           transfer modes. Also say Y if you want device ID information to
 155           appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
 156
 157 config PARPORT_NOT_PC
 158         bool
 159
 160 endif # PARPORT