drivers/net/wireless/wavelan_cs.h

   1 /*
   2  *      Wavelan Pcmcia driver
   3  *
   4  *              Jean II - HPLB '96
   5  *
   6  * Reorganization and extension of the driver.
   7  * Original copyright follow. See wavelan_cs.h for details.
   8  *
   9  * This file contain the declarations of the Wavelan hardware. Note that
  10  * the Pcmcia Wavelan include a i82593 controller (see definitions in
  11  * file i82593.h).
  12  *
  13  * The main difference between the pcmcia hardware and the ISA one is
  14  * the Ethernet Controller (i82593 instead of i82586). The i82593 allow
  15  * only one send buffer. The PSA (Parameter Storage Area : EEprom for
  16  * permanent storage of various info) is memory mapped, but not the
  17  * MMI (Modem Management Interface).
  18  */
  19
  20 /*
  21  * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card:
  22  *   An Ethernet-like radio transceiver controlled by an Intel 82593
  23  *   coprocessor.
  24  *
  25  *
  26  ****************************************************************************
  27  *   Copyright 1995
  28  *   Anthony D. Joseph
  29  *   Massachusetts Institute of Technology
  30  *
  31  *   Permission to use, copy, modify, and distribute this program
  32  *   for any purpose and without fee is hereby granted, provided
  33  *   that this copyright and permission notice appear on all copies
  34  *   and supporting documentation, the name of M.I.T. not be used
  35  *   in advertising or publicity pertaining to distribution of the
  36  *   program without specific prior permission, and notice be given
  37  *   in supporting documentation that copying and distribution is
  38  *   by permission of M.I.T.  M.I.T. makes no representations about
  39  *   the suitability of this software for any purpose.  It is pro-
  40  *   vided "as is" without express or implied warranty.
  41  ****************************************************************************
  42  *
  43  *
  44  * Credits:
  45  *     Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for
  46  *       providing extremely useful information about WaveLAN PCMCIA hardware
  47  *
  48  *     This driver is based upon several other drivers, in particular:
  49  *       David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
  50  *       Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
  51  *       Anders Klemets' PCMCIA WaveLAN adapter driver
  52  *       Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
  53  */
  54
  55 #ifndef _WAVELAN_CS_H
  56 #define _WAVELAN_CS_H
  57
  58 /************************** MAGIC NUMBERS ***************************/
  59
  60 /* The detection of the wavelan card is made by reading the MAC address
  61  * from the card and checking it. If you have a non AT&T product (OEM,
  62  * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this
  63  * part to accommodate your hardware...
  64  */
  65 const unsigned char     MAC_ADDRESSES[][3] =
  66 {
  67   { 0x08, 0x00, 0x0E },         /* AT&T Wavelan (standard) & DEC RoamAbout */
  68   { 0x08, 0x00, 0x6A },         /* AT&T Wavelan (alternate) */
  69   { 0x00, 0x00, 0xE1 },         /* Hitachi Wavelan */
  70   { 0x00, 0x60, 0x1D }          /* Lucent Wavelan (another one) */
  71   /* Add your card here and send me the patch ! */
  72 };
  73
  74 /*
  75  * Constants used to convert channels to frequencies
  76  */
  77
  78 /* Frequency available in the 2.0 modem, in units of 250 kHz
  79  * (as read in the offset register of the dac area).
  80  * Used to map channel numbers used by `wfreqsel' to frequencies
  81  */
  82 const short     channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
  83                                     0xD0, 0xF0, 0xF8, 0x150 };
  84
  85 /* Frequencies of the 1.0 modem (fixed frequencies).
  86  * Use to map the PSA `subband' to a frequency
  87  * Note : all frequencies apart from the first one need to be multiplied by 10
  88  */
  89 const int       fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
  90
  91
  92 /*************************** PC INTERFACE ****************************/
  93
  94 /* WaveLAN host interface definitions */
  95
  96 #define LCCR(base)      (base)          /* LAN Controller Command Register */
  97 #define LCSR(base)      (base)          /* LAN Controller Status Register */
  98 #define HACR(base)      (base+0x1)      /* Host Adapter Command Register */
  99 #define HASR(base)      (base+0x1)      /* Host Adapter Status Register */
 100 #define PIORL(base)     (base+0x2)      /* Program I/O Register Low */
 101 #define RPLL(base)      (base+0x2)      /* Receive Pointer Latched Low */
 102 #define PIORH(base)     (base+0x3)      /* Program I/O Register High */
 103 #define RPLH(base)      (base+0x3)      /* Receive Pointer Latched High */
 104 #define PIOP(base)      (base+0x4)      /* Program I/O Port */
 105 #define MMR(base)       (base+0x6)      /* MMI Address Register */
 106 #define MMD(base)       (base+0x7)      /* MMI Data Register */
 107
 108 /* Host Adaptor Command Register bit definitions */
 109
 110 #define HACR_LOF          (1 << 3)      /* Lock Out Flag, toggle every 250ms */
 111 #define HACR_PWR_STAT     (1 << 4)      /* Power State, 1=active, 0=sleep */
 112 #define HACR_TX_DMA_RESET (1 << 5)      /* Reset transmit DMA ptr on high */
 113 #define HACR_RX_DMA_RESET (1 << 6)      /* Reset receive DMA ptr on high */
 114 #define HACR_ROM_WEN      (1 << 7)      /* EEPROM write enabled when true */
 115
 116 #define HACR_RESET              (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET)
 117 #define HACR_DEFAULT            (HACR_PWR_STAT)
 118
 119 /* Host Adapter Status Register bit definitions */
 120
 121 #define HASR_MMI_BUSY   (1 << 2)        /* MMI is busy when true */
 122 #define HASR_LOF        (1 << 3)        /* Lock out flag status */
 123 #define HASR_NO_CLK     (1 << 4)        /* active when modem not connected */
 124
 125 /* Miscellaneous bit definitions */
 126
 127 #define PIORH_SEL_TX    (1 << 5)        /* PIOR points to 0=rx/1=tx buffer */
 128 #define MMR_MMI_WR      (1 << 0)        /* Next MMI cycle is 0=read, 1=write */
 129 #define PIORH_MASK      0x1f            /* only low 5 bits are significant */
 130 #define RPLH_MASK       0x1f            /* only low 5 bits are significant */
 131 #define MMI_ADDR_MASK   0x7e            /* Bits 1-6 of MMR are significant */
 132
 133 /* Attribute Memory map */
 134
 135 #define CIS_ADDR        0x0000          /* Card Information Status Register */
 136 #define PSA_ADDR        0x0e00          /* Parameter Storage Area address */
 137 #define EEPROM_ADDR     0x1000          /* EEPROM address (unused ?) */
 138 #define COR_ADDR        0x4000          /* Configuration Option Register */
 139
 140 /* Configuration Option Register bit definitions */
 141
 142 #define COR_CONFIG      (1 << 0)        /* Config Index, 0 when unconfigured */
 143 #define COR_SW_RESET    (1 << 7)        /* Software Reset on true */
 144 #define COR_LEVEL_IRQ   (1 << 6)        /* Level IRQ */
 145
 146 /* Local Memory map */
 147
 148 #define RX_BASE         0x0000          /* Receive memory, 8 kB */
 149 #define TX_BASE         0x2000          /* Transmit memory, 2 kB */
 150 #define UNUSED_BASE     0x2800          /* Unused, 22 kB */
 151 #define RX_SIZE         (TX_BASE-RX_BASE)       /* Size of receive area */
 152 #define RX_SIZE_SHIFT   6               /* Bits to shift in stop register */
 153
 154 #define TRUE  1
 155 #define FALSE 0
 156
 157 #define MOD_ENAL 1
 158 #define MOD_PROM 2
 159
 160 /* Size of a MAC address */
 161 #define WAVELAN_ADDR_SIZE       6
 162
 163 /* Maximum size of Wavelan packet */
 164 #define WAVELAN_MTU     1500
 165
 166 #define MAXDATAZ                (6 + 6 + 2 + WAVELAN_MTU)
 167
 168 /********************** PARAMETER STORAGE AREA **********************/
 169
 170 /*
 171  * Parameter Storage Area (PSA).
 172  */
 173 typedef struct psa_t    psa_t;
 174 struct psa_t
 175 {
 176   /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */
 177   unsigned char psa_io_base_addr_1;     /* [0x00] Base address 1 ??? */
 178   unsigned char psa_io_base_addr_2;     /* [0x01] Base address 2 */
 179   unsigned char psa_io_base_addr_3;     /* [0x02] Base address 3 */
 180   unsigned char psa_io_base_addr_4;     /* [0x03] Base address 4 */
 181   unsigned char psa_rem_boot_addr_1;    /* [0x04] Remote Boot Address 1 */
 182   unsigned char psa_rem_boot_addr_2;    /* [0x05] Remote Boot Address 2 */
 183   unsigned char psa_rem_boot_addr_3;    /* [0x06] Remote Boot Address 3 */
 184   unsigned char psa_holi_params;        /* [0x07] HOst Lan Interface (HOLI) Parameters */
 185   unsigned char psa_int_req_no;         /* [0x08] Interrupt Request Line */
 186   unsigned char psa_unused0[7];         /* [0x09-0x0F] unused */
 187
 188   unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE];   /* [0x10-0x15] Universal (factory) MAC Address */
 189   unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE];  /* [0x16-1B] Local MAC Address */
 190   unsigned char psa_univ_local_sel;     /* [0x1C] Universal Local Selection */
 191 #define         PSA_UNIVERSAL   0               /* Universal (factory) */
 192 #define         PSA_LOCAL       1               /* Local */
 193   unsigned char psa_comp_number;        /* [0x1D] Compatability Number: */
 194 #define         PSA_COMP_PC_AT_915      0       /* PC-AT 915 MHz        */
 195 #define         PSA_COMP_PC_MC_915      1       /* PC-MC 915 MHz        */
 196 #define         PSA_COMP_PC_AT_2400     2       /* PC-AT 2.4 GHz        */
 197 #define         PSA_COMP_PC_MC_2400     3       /* PC-MC 2.4 GHz        */
 198 #define         PSA_COMP_PCMCIA_915     4       /* PCMCIA 915 MHz or 2.0 */
 199   unsigned char psa_thr_pre_set;        /* [0x1E] Modem Threshold Preset */
 200   unsigned char psa_feature_select;     /* [0x1F] Call code required (1=on) */
 201 #define         PSA_FEATURE_CALL_CODE   0x01    /* Call code required (Japan) */
 202   unsigned char psa_subband;            /* [0x20] Subband       */
 203 #define         PSA_SUBBAND_915         0       /* 915 MHz or 2.0 */
 204 #define         PSA_SUBBAND_2425        1       /* 2425 MHz     */
 205 #define         PSA_SUBBAND_2460        2       /* 2460 MHz     */
 206 #define         PSA_SUBBAND_2484        3       /* 2484 MHz     */
 207 #define         PSA_SUBBAND_2430_5      4       /* 2430.5 MHz   */
 208   unsigned char psa_quality_thr;        /* [0x21] Modem Quality Threshold */
 209   unsigned char psa_mod_delay;          /* [0x22] Modem Delay ??? (reserved) */
 210   unsigned char psa_nwid[2];            /* [0x23-0x24] Network ID */
 211   unsigned char psa_nwid_select;        /* [0x25] Network ID Select On Off */
 212   unsigned char psa_encryption_select;  /* [0x26] Encryption On Off */
 213   unsigned char psa_encryption_key[8];  /* [0x27-0x2E] Encryption Key */
 214   unsigned char psa_databus_width;      /* [0x2F] AT bus width select 8/16 */
 215   unsigned char psa_call_code[8];       /* [0x30-0x37] (Japan) Call Code */
 216   unsigned char psa_nwid_prefix[2];     /* [0x38-0x39] Roaming domain */
 217   unsigned char psa_reserved[2];        /* [0x3A-0x3B] Reserved - fixed 00 */
 218   unsigned char psa_conf_status;        /* [0x3C] Conf Status, bit 0=1:config*/
 219   unsigned char psa_crc[2];             /* [0x3D] CRC-16 over PSA */
 220   unsigned char psa_crc_status;         /* [0x3F] CRC Valid Flag */
 221 };
 222
 223 /* Size for structure checking (if padding is correct) */
 224 #define PSA_SIZE        64
 225
 226 /* Calculate offset of a field in the above structure
 227  * Warning : only even addresses are used */
 228 #define psaoff(p,f)     ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
 229
 230 /******************** MODEM MANAGEMENT INTERFACE ********************/
 231
 232 /*
 233  * Modem Management Controller (MMC) write structure.
 234  */
 235 typedef struct mmw_t    mmw_t;
 236 struct mmw_t
 237 {
 238   unsigned char mmw_encr_key[8];        /* encryption key */
 239   unsigned char mmw_encr_enable;        /* enable/disable encryption */
 240 #define MMW_ENCR_ENABLE_MODE    0x02    /* Mode of security option */
 241 #define MMW_ENCR_ENABLE_EN      0x01    /* Enable security option */
 242   unsigned char mmw_unused0[1];         /* unused */
 243   unsigned char mmw_des_io_invert;      /* Encryption option */
 244 #define MMW_DES_IO_INVERT_RES   0x0F    /* Reserved */
 245 #define MMW_DES_IO_INVERT_CTRL  0xF0    /* Control ??? (set to 0) */
 246   unsigned char mmw_unused1[5];         /* unused */
 247   unsigned char mmw_loopt_sel;          /* looptest selection */
 248 #define MMW_LOOPT_SEL_DIS_NWID  0x40    /* disable NWID filtering */
 249 #define MMW_LOOPT_SEL_INT       0x20    /* activate Attention Request */
 250 #define MMW_LOOPT_SEL_LS        0x10    /* looptest w/o collision avoidance */
 251 #define MMW_LOOPT_SEL_LT3A      0x08    /* looptest 3a */
 252 #define MMW_LOOPT_SEL_LT3B      0x04    /* looptest 3b */
 253 #define MMW_LOOPT_SEL_LT3C      0x02    /* looptest 3c */
 254 #define MMW_LOOPT_SEL_LT3D      0x01    /* looptest 3d */
 255   unsigned char mmw_jabber_enable;      /* jabber timer enable */
 256   /* Abort transmissions > 200 ms */
 257   unsigned char mmw_freeze;             /* freeze / unfreeeze signal level */
 258   /* 0 : signal level & qual updated for every new message, 1 : frozen */
 259   unsigned char mmw_anten_sel;          /* antenna selection */
 260 #define MMW_ANTEN_SEL_SEL       0x01    /* direct antenna selection */
 261 #define MMW_ANTEN_SEL_ALG_EN    0x02    /* antenna selection algo. enable */
 262   unsigned char mmw_ifs;                /* inter frame spacing */
 263   /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
 264   unsigned char mmw_mod_delay;          /* modem delay (synchro) */
 265   unsigned char mmw_jam_time;           /* jamming time (after collision) */
 266   unsigned char mmw_unused2[1];         /* unused */
 267   unsigned char mmw_thr_pre_set;        /* level threshold preset */
 268   /* Discard all packet with signal < this value (4) */
 269   unsigned char mmw_decay_prm;          /* decay parameters */
 270   unsigned char mmw_decay_updat_prm;    /* decay update parameterz */
 271   unsigned char mmw_quality_thr;        /* quality (z-quotient) threshold */
 272   /* Discard all packet with quality < this value (3) */
 273   unsigned char mmw_netw_id_l;          /* NWID low order byte */
 274   unsigned char mmw_netw_id_h;          /* NWID high order byte */
 275   /* Network ID or Domain : create virtual net on the air */
 276
 277   /* 2.0 Hardware extension - frequency selection support */
 278   unsigned char mmw_mode_select;        /* for analog tests (set to 0) */
 279   unsigned char mmw_unused3[1];         /* unused */
 280   unsigned char mmw_fee_ctrl;           /* frequency eeprom control */
 281 #define MMW_FEE_CTRL_PRE        0x10    /* Enable protected instructions */
 282 #define MMW_FEE_CTRL_DWLD       0x08    /* Download eeprom to mmc */
 283 #define MMW_FEE_CTRL_CMD        0x07    /* EEprom commands : */
 284 #define MMW_FEE_CTRL_READ       0x06    /* Read */
 285 #define MMW_FEE_CTRL_WREN       0x04    /* Write enable */
 286 #define MMW_FEE_CTRL_WRITE      0x05    /* Write data to address */
 287 #define MMW_FEE_CTRL_WRALL      0x04    /* Write data to all addresses */
 288 #define MMW_FEE_CTRL_WDS        0x04    /* Write disable */
 289 #define MMW_FEE_CTRL_PRREAD     0x16    /* Read addr from protect register */
 290 #define MMW_FEE_CTRL_PREN       0x14    /* Protect register enable */
 291 #define MMW_FEE_CTRL_PRCLEAR    0x17    /* Unprotect all registers */
 292 #define MMW_FEE_CTRL_PRWRITE    0x15    /* Write addr in protect register */
 293 #define MMW_FEE_CTRL_PRDS       0x14    /* Protect register disable */
 294   /* Never issue this command (PRDS) : it's irreversible !!! */
 295
 296   unsigned char mmw_fee_addr;           /* EEprom address */
 297 #define MMW_FEE_ADDR_CHANNEL    0xF0    /* Select the channel */
 298 #define MMW_FEE_ADDR_OFFSET     0x0F    /* Offset in channel data */
 299 #define MMW_FEE_ADDR_EN         0xC0    /* FEE_CTRL enable operations */
 300 #define MMW_FEE_ADDR_DS         0x00    /* FEE_CTRL disable operations */
 301 #define MMW_FEE_ADDR_ALL        0x40    /* FEE_CTRL all operations */
 302 #define MMW_FEE_ADDR_CLEAR      0xFF    /* FEE_CTRL clear operations */
 303
 304   unsigned char mmw_fee_data_l;         /* Write data to EEprom */
 305   unsigned char mmw_fee_data_h;         /* high octet */
 306   unsigned char mmw_ext_ant;            /* Setting for external antenna */
 307 #define MMW_EXT_ANT_EXTANT      0x01    /* Select external antenna */
 308 #define MMW_EXT_ANT_POL         0x02    /* Polarity of the antenna */
 309 #define MMW_EXT_ANT_INTERNAL    0x00    /* Internal antenna */
 310 #define MMW_EXT_ANT_EXTERNAL    0x03    /* External antenna */
 311 #define MMW_EXT_ANT_IQ_TEST     0x1C    /* IQ test pattern (set to 0) */
 312 };
 313
 314 /* Size for structure checking (if padding is correct) */
 315 #define MMW_SIZE        37
 316
 317 /* Calculate offset of a field in the above structure */
 318 #define mmwoff(p,f)     (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
 319
 320
 321 /*
 322  * Modem Management Controller (MMC) read structure.
 323  */
 324 typedef struct mmr_t    mmr_t;
 325 struct mmr_t
 326 {
 327   unsigned char mmr_unused0[8];         /* unused */
 328   unsigned char mmr_des_status;         /* encryption status */
 329   unsigned char mmr_des_avail;          /* encryption available (0x55 read) */
 330 #define MMR_DES_AVAIL_DES       0x55            /* DES available */
 331 #define MMR_DES_AVAIL_AES       0x33            /* AES (AT&T) available */
 332   unsigned char mmr_des_io_invert;      /* des I/O invert register */
 333   unsigned char mmr_unused1[5];         /* unused */
 334   unsigned char mmr_dce_status;         /* DCE status */
 335 #define MMR_DCE_STATUS_RX_BUSY          0x01    /* receiver busy */
 336 #define MMR_DCE_STATUS_LOOPT_IND        0x02    /* loop test indicated */
 337 #define MMR_DCE_STATUS_TX_BUSY          0x04    /* transmitter on */
 338 #define MMR_DCE_STATUS_JBR_EXPIRED      0x08    /* jabber timer expired */
 339 #define MMR_DCE_STATUS                  0x0F    /* mask to get the bits */
 340   unsigned char mmr_dsp_id;             /* DSP id (AA = Daedalus rev A) */
 341   unsigned char mmr_unused2[2];         /* unused */
 342   unsigned char mmr_correct_nwid_l;     /* # of correct NWID's rxd (low) */
 343   unsigned char mmr_correct_nwid_h;     /* # of correct NWID's rxd (high) */
 344   /* Warning : Read high order octet first !!! */
 345   unsigned char mmr_wrong_nwid_l;       /* # of wrong NWID's rxd (low) */
 346   unsigned char mmr_wrong_nwid_h;       /* # of wrong NWID's rxd (high) */
 347   unsigned char mmr_thr_pre_set;        /* level threshold preset */
 348 #define MMR_THR_PRE_SET         0x3F            /* level threshold preset */
 349 #define MMR_THR_PRE_SET_CUR     0x80            /* Current signal above it */
 350   unsigned char mmr_signal_lvl;         /* signal level */
 351 #define MMR_SIGNAL_LVL          0x3F            /* signal level */
 352 #define MMR_SIGNAL_LVL_VALID    0x80            /* Updated since last read */
 353   unsigned char mmr_silence_lvl;        /* silence level (noise) */
 354 #define MMR_SILENCE_LVL         0x3F            /* silence level */
 355 #define MMR_SILENCE_LVL_VALID   0x80            /* Updated since last read */
 356   unsigned char mmr_sgnl_qual;          /* signal quality */
 357 #define MMR_SGNL_QUAL           0x0F            /* signal quality */
 358 #define MMR_SGNL_QUAL_ANT       0x80            /* current antenna used */
 359   unsigned char mmr_netw_id_l;          /* NWID low order byte ??? */
 360   unsigned char mmr_unused3[3];         /* unused */
 361
 362   /* 2.0 Hardware extension - frequency selection support */
 363   unsigned char mmr_fee_status;         /* Status of frequency eeprom */
 364 #define MMR_FEE_STATUS_ID       0xF0            /* Modem revision id */
 365 #define MMR_FEE_STATUS_DWLD     0x08            /* Download in progress */
 366 #define MMR_FEE_STATUS_BUSY     0x04            /* EEprom busy */
 367   unsigned char mmr_unused4[1];         /* unused */
 368   unsigned char mmr_fee_data_l;         /* Read data from eeprom (low) */
 369   unsigned char mmr_fee_data_h;         /* Read data from eeprom (high) */
 370 };
 371
 372 /* Size for structure checking (if padding is correct) */
 373 #define MMR_SIZE        36
 374
 375 /* Calculate offset of a field in the above structure */
 376 #define mmroff(p,f)     (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
 377
 378
 379 /* Make the two above structures one */
 380 typedef union mm_t
 381 {
 382   struct mmw_t  w;      /* Write to the mmc */
 383   struct mmr_t  r;      /* Read from the mmc */
 384 } mm_t;
 385
 386 #endif /* _WAVELAN_CS_H */