drivers/net/wireless/Kconfig

   1 #
   2 # Wireless LAN device configuration
   3 #
   4
   5 menu "Wireless LAN"
   6         depends on !S390
   7
   8 config WLAN_PRE80211
   9         bool "Wireless LAN (pre-802.11)"
  10         depends on NETDEVICES
  11         ---help---
  12           Say Y if you have any pre-802.11 wireless LAN hardware.
  13
  14           This option does not affect the kernel build, it only
  15           lets you choose drivers.
  16
  17 config STRIP
  18         tristate "STRIP (Metricom starmode radio IP)"
  19         depends on INET && WLAN_PRE80211
  20         select WIRELESS_EXT
  21         ---help---
  22           Say Y if you have a Metricom radio and intend to use Starmode Radio
  23           IP. STRIP is a radio protocol developed for the MosquitoNet project
  24           (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
  25           traffic using Metricom radios.  Metricom radios are small, battery
  26           powered, 100kbit/sec packet radio transceivers, about the size and
  27           weight of a cellular telephone. (You may also have heard them called
  28           "Metricom modems" but we avoid the term "modem" because it misleads
  29           many people into thinking that you can plug a Metricom modem into a
  30           phone line and use it as a modem.)
  31
  32           You can use STRIP on any Linux machine with a serial port, although
  33           it is obviously most useful for people with laptop computers. If you
  34           think you might get a Metricom radio in the future, there is no harm
  35           in saying Y to STRIP now, except that it makes the kernel a bit
  36           bigger.
  37
  38           To compile this as a module, choose M here: the module will be
  39           called strip.
  40
  41 config ARLAN
  42         tristate "Aironet Arlan 655 & IC2200 DS support"
  43         depends on ISA && !64BIT && WLAN_PRE80211
  44         select WIRELESS_EXT
  45         ---help---
  46           Aironet makes Arlan, a class of wireless LAN adapters. These use the
  47           www.Telxon.com chip, which is also used on several similar cards.
  48           This driver is tested on the 655 and IC2200 series cards. Look at
  49           <http://www.ylenurme.ee/~elmer/655/> for the latest information.
  50
  51           The driver is built as two modules, arlan and arlan-proc. The latter
  52           is the /proc interface and is not needed most of time.
  53
  54           On some computers the card ends up in non-valid state after some
  55           time. Use a ping-reset script to clear it.
  56
  57 config WAVELAN
  58         tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
  59         depends on ISA && WLAN_PRE80211
  60         select WIRELESS_EXT
  61         ---help---
  62           The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
  63           a Radio LAN (wireless Ethernet-like Local Area Network) using the
  64           radio frequencies 900 MHz and 2.4 GHz.
  65
  66           This driver support the ISA version of the WaveLAN card.  A separate
  67           driver for the PCMCIA (PC-card) hardware is available in David
  68           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  69           for location).
  70
  71           If you want to use an ISA WaveLAN card under Linux, say Y and read
  72           the Ethernet-HOWTO, available from
  73           <http://www.tldp.org/docs.html#howto>. Some more specific
  74           information is contained in
  75           <file:Documentation/networking/wavelan.txt> and in the source code
  76           <file:drivers/net/wavelan.p.h>.
  77
  78           You will also need the wireless tools package available from
  79           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
  80           Please read the man pages contained therein.
  81
  82           To compile this driver as a module, choose M here: the module will be
  83           called wavelan.
  84
  85 config PCMCIA_WAVELAN
  86         tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
  87         depends on PCMCIA && WLAN_PRE80211
  88         select WIRELESS_EXT
  89         help
  90           Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
  91           (PC-card) wireless Ethernet networking card to your computer.  This
  92           driver is for the non-IEEE-802.11 Wavelan cards.
  93
  94           To compile this driver as a module, choose M here: the module will be
  95           called wavelan_cs.  If unsure, say N.
  96
  97 config PCMCIA_NETWAVE
  98         tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
  99         depends on PCMCIA && WLAN_PRE80211
 100         select WIRELESS_EXT
 101         help
 102           Say Y here if you intend to attach this type of PCMCIA (PC-card)
 103           wireless Ethernet networking card to your computer.
 104
 105           To compile this driver as a module, choose M here: the module will be
 106           called netwave_cs.  If unsure, say N.
 107
 108
 109 config WLAN_80211
 110         bool "Wireless LAN (IEEE 802.11)"
 111         depends on NETDEVICES
 112         ---help---
 113           Say Y if you have any 802.11 wireless LAN hardware.
 114
 115           This option does not affect the kernel build, it only
 116           lets you choose drivers.
 117
 118 config PCMCIA_RAYCS
 119         tristate "Aviator/Raytheon 2.4MHz wireless support"
 120         depends on PCMCIA && WLAN_80211
 121         select WIRELESS_EXT
 122         ---help---
 123           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 124           (PC-card) wireless Ethernet networking card to your computer.
 125           Please read the file <file:Documentation/networking/ray_cs.txt> for
 126           details.
 127
 128           To compile this driver as a module, choose M here: the module will be
 129           called ray_cs.  If unsure, say N.
 130
 131 config IPW2100
 132         tristate "Intel PRO/Wireless 2100 Network Connection"
 133         depends on PCI && WLAN_80211
 134         select WIRELESS_EXT
 135         select FW_LOADER
 136         select IEEE80211
 137         ---help---
 138           A driver for the Intel PRO/Wireless 2100 Network
 139           Connection 802.11b wireless network adapter.
 140
 141           See <file:Documentation/networking/README.ipw2100> for information on
 142           the capabilities currently enabled in this driver and for tips
 143           for debugging issues and problems.
 144
 145           In order to use this driver, you will need a firmware image for it.
 146           You can obtain the firmware from
 147           <http://ipw2100.sf.net/>.  Once you have the firmware image, you
 148           will need to place it in /lib/firmware.
 149
 150           You will also very likely need the Wireless Tools in order to
 151           configure your card:
 152
 153           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 154
 155           If you want to compile the driver as a module ( = code which can be
 156           inserted in and removed from the running kernel whenever you want),
 157           say M here and read <file:Documentation/kbuild/modules.txt>.
 158           The module will be called ipw2100.ko.
 159
 160 config IPW2100_MONITOR
 161         bool "Enable promiscuous mode"
 162         depends on IPW2100
 163         ---help---
 164           Enables promiscuous/monitor mode support for the ipw2100 driver.
 165           With this feature compiled into the driver, you can switch to
 166           promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 167           mode, no packets can be sent.
 168
 169 config IPW2100_DEBUG
 170         bool "Enable full debugging output in IPW2100 module."
 171         depends on IPW2100
 172         ---help---
 173           This option will enable debug tracing output for the IPW2100.
 174
 175           This will result in the kernel module being ~60k larger.  You can
 176           control which debug output is sent to the kernel log by setting the
 177           value in
 178
 179           /sys/bus/pci/drivers/ipw2100/debug_level
 180
 181           This entry will only exist if this option is enabled.
 182
 183           If you are not trying to debug or develop the IPW2100 driver, you
 184           most likely want to say N here.
 185
 186 config IPW2200
 187         tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
 188         depends on PCI && WLAN_80211
 189         select WIRELESS_EXT
 190         select FW_LOADER
 191         select IEEE80211
 192         ---help---
 193           A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
 194           Connection adapters.
 195
 196           See <file:Documentation/networking/README.ipw2200> for
 197           information on the capabilities currently enabled in this
 198           driver and for tips for debugging issues and problems.
 199
 200           In order to use this driver, you will need a firmware image for it.
 201           You can obtain the firmware from
 202           <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200
 203           for information on where to install the firmware images.
 204
 205           You will also very likely need the Wireless Tools in order to
 206           configure your card:
 207
 208           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 209
 210           If you want to compile the driver as a module ( = code which can be
 211           inserted in and removed from the running kernel whenever you want),
 212           say M here and read <file:Documentation/kbuild/modules.txt>.
 213           The module will be called ipw2200.ko.
 214
 215 config IPW2200_MONITOR
 216         bool "Enable promiscuous mode"
 217         depends on IPW2200
 218         ---help---
 219           Enables promiscuous/monitor mode support for the ipw2200 driver.
 220           With this feature compiled into the driver, you can switch to
 221           promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 222           mode, no packets can be sent.
 223
 224 config IPW2200_RADIOTAP
 225         bool "Enable radiotap format 802.11 raw packet support"
 226         depends on IPW2200_MONITOR
 227
 228 config IPW2200_PROMISCUOUS
 229         bool "Enable creation of a RF radiotap promiscuous interface"
 230         depends on IPW2200_MONITOR
 231         select IPW2200_RADIOTAP
 232         ---help---
 233           Enables the creation of a second interface prefixed 'rtap'.
 234           This second interface will provide every received in radiotap
 235           format.
 236
 237           This is useful for performing wireless network analysis while
 238           maintaining an active association.
 239
 240           Example usage:
 241
 242             % modprobe ipw2200 rtap_iface=1
 243             % ifconfig rtap0 up
 244             % tethereal -i rtap0
 245
 246           If you do not specify 'rtap_iface=1' as a module parameter then
 247           the rtap interface will not be created and you will need to turn
 248           it on via sysfs:
 249
 250             % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 251
 252 config IPW2200_QOS
 253         bool "Enable QoS support"
 254         depends on IPW2200 && EXPERIMENTAL
 255
 256 config IPW2200_DEBUG
 257         bool "Enable full debugging output in IPW2200 module."
 258         depends on IPW2200
 259         ---help---
 260           This option will enable low level debug tracing output for IPW2200.
 261
 262           Note, normal debug code is already compiled in. This low level
 263           debug option enables debug on hot paths (e.g Tx, Rx, ISR) and
 264           will result in the kernel module being ~70 larger.  Most users
 265           will typically not need this high verbosity debug information.
 266
 267           If you are not sure, say N here.
 268
 269 config LIBERTAS
 270         tristate "Marvell 8xxx Libertas WLAN driver support"
 271         depends on WLAN_80211
 272         select IEEE80211
 273         select FW_LOADER
 274         ---help---
 275           A library for Marvell Libertas 8xxx devices.
 276
 277 config LIBERTAS_USB
 278         tristate "Marvell Libertas 8388 USB 802.11b/g cards"
 279         depends on LIBERTAS && USB
 280         ---help---
 281           A driver for Marvell Libertas 8388 USB devices.
 282
 283 config LIBERTAS_DEBUG
 284         bool "Enable full debugging output in the Libertas module."
 285         depends on LIBERTAS
 286         ---help---
 287           Debugging support.
 288
 289 config AIRO
 290         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
 291         depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
 292         select WIRELESS_EXT
 293         select CRYPTO
 294         ---help---
 295           This is the standard Linux driver to support Cisco/Aironet ISA and
 296           PCI 802.11 wireless cards.
 297           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 298           - with or without encryption) as well as card before the Cisco
 299           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
 300
 301           This driver support both the standard Linux Wireless Extensions
 302           and Cisco proprietary API, so both the Linux Wireless Tools and the
 303           Cisco Linux utilities can be used to configure the card.
 304
 305           The driver can be compiled as a module and will be named "airo".
 306
 307 config HERMES
 308         tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 309         depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
 310         select WIRELESS_EXT
 311         ---help---
 312           A driver for 802.11b wireless cards based on the "Hermes" or
 313           Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
 314           majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
 315           - except for the Cisco/Aironet cards.  Cards supported include the
 316           Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
 317           Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
 318           IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
 319           MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
 320           PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
 321
 322           This option includes the guts of the driver, but in order to
 323           actually use a card you will also need to enable support for PCMCIA
 324           Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
 325
 326           You will also very likely also need the Wireless Tools in order to
 327           configure your card and that /etc/pcmcia/wireless.opts works :
 328           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 329
 330 config APPLE_AIRPORT
 331         tristate "Apple Airport support (built-in)"
 332         depends on PPC_PMAC && HERMES
 333         help
 334           Say Y here to support the Airport 802.11b wireless Ethernet hardware
 335           built into the Macintosh iBook and other recent PowerPC-based
 336           Macintosh machines. This is essentially a Lucent Orinoco card with
 337           a non-standard interface.
 338
 339           This driver does not support the Airport Extreme (802.11b/g). Use
 340           the BCM43xx driver for Airport Extreme cards.
 341
 342 config PLX_HERMES
 343         tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
 344         depends on PCI && HERMES
 345         help
 346           Enable support for PCMCIA cards supported by the "Hermes" (aka
 347           orinoco) driver when used in PLX9052 based PCI adaptors.  These
 348           adaptors are not a full PCMCIA controller but act as a more limited
 349           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 350           802.11b PCMCIA cards can be used in desktop machines.  The Netgear
 351           MA301 is such an adaptor.
 352
 353 config TMD_HERMES
 354         tristate "Hermes in TMD7160 based PCI adaptor support"
 355         depends on PCI && HERMES
 356         help
 357           Enable support for PCMCIA cards supported by the "Hermes" (aka
 358           orinoco) driver when used in TMD7160 based PCI adaptors.  These
 359           adaptors are not a full PCMCIA controller but act as a more limited
 360           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 361           802.11b PCMCIA cards can be used in desktop machines.
 362
 363 config NORTEL_HERMES
 364         tristate "Nortel emobility PCI adaptor support"
 365         depends on PCI && HERMES
 366         help
 367           Enable support for PCMCIA cards supported by the "Hermes" (aka
 368           orinoco) driver when used in Nortel emobility PCI adaptors.  These
 369           adaptors are not full PCMCIA controllers, but act as a more limited
 370           PCI <-> PCMCIA bridge.
 371
 372 config PCI_HERMES
 373         tristate "Prism 2.5 PCI 802.11b adaptor support"
 374         depends on PCI && HERMES
 375         help
 376           Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 377           the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
 378           PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
 379           common.  Some of the built-in wireless adaptors in laptops are of
 380           this variety.
 381
 382 config ATMEL
 383       tristate "Atmel at76c50x chipset  802.11b support"
 384       depends on (PCI || PCMCIA) && WLAN_80211
 385       select WIRELESS_EXT
 386       select FW_LOADER
 387       select CRC32
 388        ---help---
 389         A driver 802.11b wireless cards based on the Atmel fast-vnet
 390         chips. This driver supports standard Linux wireless extensions.
 391
 392         Many  cards based on this chipset do not have flash memory
 393         and need their firmware loaded at start-up. If yours is
 394         one of these, you will need to provide a firmware image
 395         to be loaded into the card by the driver. The Atmel
 396         firmware package can be downloaded from
 397         <http://www.thekelleys.org.uk/atmel>
 398
 399 config PCI_ATMEL
 400       tristate "Atmel at76c506 PCI cards"
 401       depends on ATMEL && PCI
 402        ---help---
 403         Enable support for PCI and mini-PCI cards containing the
 404         Atmel at76c506 chip.
 405
 406 config PCMCIA_HERMES
 407         tristate "Hermes PCMCIA card support"
 408         depends on PCMCIA && HERMES
 409         ---help---
 410           A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
 411           as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
 412           EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
 413           others).  It should also be usable on various Prism II based cards
 414           such as the Linksys, D-Link and Farallon Skyline.  It should also
 415           work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
 416
 417           To use your PC-cards, you will need supporting software from David
 418           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 419           for location).  You also want to check out the PCMCIA-HOWTO,
 420           available from <http://www.tldp.org/docs.html#howto>.
 421
 422           You will also very likely also need the Wireless Tools in order to
 423           configure your card and that /etc/pcmcia/wireless.opts works:
 424           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 425
 426 config PCMCIA_SPECTRUM
 427         tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
 428         depends on PCMCIA && HERMES
 429         select FW_LOADER
 430         ---help---
 431
 432           This is a driver for 802.11b cards using RAM-loadable Symbol
 433           firmware, such as Symbol Wireless Networker LA4100, CompactFlash
 434           cards by Socket Communications and Intel PRO/Wireless 2011B.
 435
 436           This driver requires firmware download on startup.  Utilities
 437           for downloading Symbol firmware are available at
 438           <http://sourceforge.net/projects/orinoco/>
 439
 440 config AIRO_CS
 441         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 442         depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
 443         select WIRELESS_EXT
 444         select CRYPTO
 445         select CRYPTO_AES
 446         ---help---
 447           This is the standard Linux driver to support Cisco/Aironet PCMCIA
 448           802.11 wireless cards.  This driver is the same as the Aironet
 449           driver part of the Linux Pcmcia package.
 450           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 451           - with or without encryption) as well as card before the Cisco
 452           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
 453           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 454           802.11b cards.
 455
 456           This driver support both the standard Linux Wireless Extensions
 457           and Cisco proprietary API, so both the Linux Wireless Tools and the
 458           Cisco Linux utilities can be used to configure the card.
 459
 460           To use your PC-cards, you will need supporting software from David
 461           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 462           for location).  You also want to check out the PCMCIA-HOWTO,
 463           available from <http://www.tldp.org/docs.html#howto>.
 464
 465 config PCMCIA_ATMEL
 466         tristate "Atmel at76c502/at76c504 PCMCIA cards"
 467         depends on ATMEL && PCMCIA
 468         select WIRELESS_EXT
 469         select FW_LOADER
 470         select CRC32
 471         ---help---
 472           Enable support for PCMCIA cards containing the
 473           Atmel at76c502 and at76c504 chips.
 474
 475 config PCMCIA_WL3501
 476       tristate "Planet WL3501 PCMCIA cards"
 477       depends on EXPERIMENTAL && PCMCIA && WLAN_80211
 478       select WIRELESS_EXT
 479        ---help---
 480          A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
 481          It has basic support for Linux wireless extensions and initial
 482          micro support for ethtool.
 483
 484 config PRISM54
 485         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
 486         depends on PCI && EXPERIMENTAL && WLAN_80211
 487         select WIRELESS_EXT
 488         select FW_LOADER
 489         ---help---
 490           Enable PCI and Cardbus support for the following chipset based cards:
 491
 492           ISL3880 - Prism GT            802.11 b/g
 493           ISL3877 - Prism Indigo        802.11 a
 494           ISL3890 - Prism Duette        802.11 a/b/g
 495
 496           For a complete list of supported cards visit <http://prism54.org>.
 497           Here is the latest confirmed list of supported cards:
 498
 499           3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
 500           Allnet ALL0271 PCI Card
 501           Compex WL54G Cardbus Card
 502           Corega CG-WLCB54GT Cardbus Card
 503           D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
 504           I-O Data WN-G54/CB Cardbus Card
 505           Kobishi XG-300 aka Z-Com Cardbus Card
 506           Netgear WG511 Cardbus Card
 507           Ovislink WL-5400PCI PCI Card
 508           Peabird WLG-PCI PCI Card
 509           Sitecom WL-100i Cardbus Card
 510           Sitecom WL-110i PCI Card
 511           SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
 512           SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 513           SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 514           Z-Com XG-900 PCI Card
 515           Zyxel G-100 Cardbus Card
 516
 517           If you enable this you will need a firmware file as well.
 518           You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
 519           You can get this non-GPL'd firmware file from the Prism54 project page:
 520           <http://prism54.org>
 521           You will also need the /etc/hotplug/firmware.agent script from
 522           a current hotplug package.
 523
 524           Note: You need a motherboard with DMA support to use any of these cards
 525
 526           If you want to compile the driver as a module ( = code which can be
 527           inserted in and removed from the running kernel whenever you want),
 528           say M here and read <file:Documentation/kbuild/modules.txt>.
 529           The module will be called prism54.ko.
 530
 531 config USB_ZD1201
 532         tristate "USB ZD1201 based Wireless device support"
 533         depends on USB && WLAN_80211
 534         select WIRELESS_EXT
 535         select FW_LOADER
 536         ---help---
 537           Say Y if you want to use wireless LAN adapters based on the ZyDAS
 538           ZD1201 chip.
 539
 540           This driver makes the adapter appear as a normal Ethernet interface,
 541           typically on wlan0.
 542
 543           The zd1201 device requires external firmware to be loaded.
 544           This can be found at http://linux-lc100020.sourceforge.net/
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called zd1201.
 548
 549 config RTL8187
 550         tristate "Realtek 8187 USB support"
 551         depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
 552         select EEPROM_93CX6
 553         ---help---
 554           This is a driver for RTL8187 based cards.
 555           These are USB based chips found in cards such as:
 556
 557           Netgear WG111v2
 558
 559           Thanks to Realtek for their support!
 560
 561 source "drivers/net/wireless/hostap/Kconfig"
 562 source "drivers/net/wireless/bcm43xx/Kconfig"
 563 source "drivers/net/wireless/zd1211rw/Kconfig"
 564
 565 endmenu