drivers/mtd/nand/bf5xx_nand.c

   1 /* linux/drivers/mtd/nand/bf5xx_nand.c
   2  *
   3  * Copyright 2006-2008 Analog Devices Inc.
   4  *      http://blackfin.uclinux.org/
   5  *      Bryan Wu <bryan.wu@analog.com>
   6  *
   7  * Blackfin BF5xx on-chip NAND flash controller driver
   8  *
   9  * Derived from drivers/mtd/nand/s3c2410.c
  10  * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
  11  *
  12  * Derived from drivers/mtd/nand/cafe.c
  13  * Copyright © 2006 Red Hat, Inc.
  14  * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
  15  *
  16  * Changelog:
  17  *      12-Jun-2007  Bryan Wu:  Initial version
  18  *      18-Jul-2007  Bryan Wu:
  19  *              - ECC_HW and ECC_SW supported
  20  *              - DMA supported in ECC_HW
  21  *              - YAFFS tested as rootfs in both ECC_HW and ECC_SW
  22  *
  23  * This program is free software; you can redistribute it and/or modify
  24  * it under the terms of the GNU General Public License as published by
  25  * the Free Software Foundation; either version 2 of the License, or
  26  * (at your option) any later version.
  27  *
  28  * This program is distributed in the hope that it will be useful,
  29  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  30  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  31  * GNU General Public License for more details.
  32  *
  33  * You should have received a copy of the GNU General Public License
  34  * along with this program; if not, write to the Free Software
  35  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  36 */
  37
  38 #include <linux/module.h>
  39 #include <linux/types.h>
  40 #include <linux/init.h>
  41 #include <linux/kernel.h>
  42 #include <linux/string.h>
  43 #include <linux/ioport.h>
  44 #include <linux/platform_device.h>
  45 #include <linux/delay.h>
  46 #include <linux/dma-mapping.h>
  47 #include <linux/err.h>
  48 #include <linux/slab.h>
  49 #include <linux/io.h>
  50 #include <linux/bitops.h>
  51
  52 #include <linux/mtd/mtd.h>
  53 #include <linux/mtd/nand.h>
  54 #include <linux/mtd/nand_ecc.h>
  55 #include <linux/mtd/partitions.h>
  56
  57 #include <asm/blackfin.h>
  58 #include <asm/dma.h>
  59 #include <asm/cacheflush.h>
  60 #include <asm/nand.h>
  61 #include <asm/portmux.h>
  62
  63 #define DRV_NAME        "bf5xx-nand"
  64 #define DRV_VERSION     "1.2"
  65 #define DRV_AUTHOR      "Bryan Wu <bryan.wu@analog.com>"
  66 #define DRV_DESC        "BF5xx on-chip NAND FLash Controller Driver"
  67
  68 /* NFC_STAT Masks */
  69 #define NBUSY       0x01  /* Not Busy */
  70 #define WB_FULL     0x02  /* Write Buffer Full */
  71 #define PG_WR_STAT  0x04  /* Page Write Pending */
  72 #define PG_RD_STAT  0x08  /* Page Read Pending */
  73 #define WB_EMPTY    0x10  /* Write Buffer Empty */
  74
  75 /* NFC_IRQSTAT Masks */
  76 #define NBUSYIRQ    0x01  /* Not Busy IRQ */
  77 #define WB_OVF      0x02  /* Write Buffer Overflow */
  78 #define WB_EDGE     0x04  /* Write Buffer Edge Detect */
  79 #define RD_RDY      0x08  /* Read Data Ready */
  80 #define WR_DONE     0x10  /* Page Write Done */
  81
  82 /* NFC_RST Masks */
  83 #define ECC_RST     0x01  /* ECC (and NFC counters) Reset */
  84
  85 /* NFC_PGCTL Masks */
  86 #define PG_RD_START 0x01  /* Page Read Start */
  87 #define PG_WR_START 0x02  /* Page Write Start */
  88
  89 #ifdef CONFIG_MTD_NAND_BF5XX_HWECC
  90 static int hardware_ecc = 1;
  91 #else
  92 static int hardware_ecc;
  93 #endif
  94
  95 static const unsigned short bfin_nfc_pin_req[] =
  96         {P_NAND_CE,
  97          P_NAND_RB,
  98          P_NAND_D0,
  99          P_NAND_D1,
 100          P_NAND_D2,
 101          P_NAND_D3,
 102          P_NAND_D4,
 103          P_NAND_D5,
 104          P_NAND_D6,
 105          P_NAND_D7,
 106          P_NAND_WE,
 107          P_NAND_RE,
 108          P_NAND_CLE,
 109          P_NAND_ALE,
 110          0};
 111
 112 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
 113 static struct nand_ecclayout bootrom_ecclayout = {
 114         .eccbytes = 24,
 115         .eccpos = {
 116                 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
 117                 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
 118                 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
 119                 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
 120                 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
 121                 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
 122                 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
 123                 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
 124         },
 125         .oobfree = {
 126                 { 0x8 * 0 + 3, 5 },
 127                 { 0x8 * 1 + 3, 5 },
 128                 { 0x8 * 2 + 3, 5 },
 129                 { 0x8 * 3 + 3, 5 },
 130                 { 0x8 * 4 + 3, 5 },
 131                 { 0x8 * 5 + 3, 5 },
 132                 { 0x8 * 6 + 3, 5 },
 133                 { 0x8 * 7 + 3, 5 },
 134         }
 135 };
 136 #endif
 137
 138 /*
 139  * Data structures for bf5xx nand flash controller driver
 140  */
 141
 142 /* bf5xx nand info */
 143 struct bf5xx_nand_info {
 144         /* mtd info */
 145         struct nand_hw_control          controller;
 146         struct mtd_info                 mtd;
 147         struct nand_chip                chip;
 148
 149         /* platform info */
 150         struct bf5xx_nand_platform      *platform;
 151
 152         /* device info */
 153         struct device                   *device;
 154
 155         /* DMA stuff */
 156         struct completion               dma_completion;
 157 };
 158
 159 /*
 160  * Conversion functions
 161  */
 162 static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd)
 163 {
 164         return container_of(mtd, struct bf5xx_nand_info, mtd);
 165 }
 166
 167 static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev)
 168 {
 169         return platform_get_drvdata(pdev);
 170 }
 171
 172 static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev)
 173 {
 174         return pdev->dev.platform_data;
 175 }
 176
 177 /*
 178  * struct nand_chip interface function pointers
 179  */
 180
 181 /*
 182  * bf5xx_nand_hwcontrol
 183  *
 184  * Issue command and address cycles to the chip
 185  */
 186 static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
 187                                    unsigned int ctrl)
 188 {
 189         if (cmd == NAND_CMD_NONE)
 190                 return;
 191
 192         while (bfin_read_NFC_STAT() & WB_FULL)
 193                 cpu_relax();
 194
 195         if (ctrl & NAND_CLE)
 196                 bfin_write_NFC_CMD(cmd);
 197         else if (ctrl & NAND_ALE)
 198                 bfin_write_NFC_ADDR(cmd);
 199         SSYNC();
 200 }
 201
 202 /*
 203  * bf5xx_nand_devready()
 204  *
 205  * returns 0 if the nand is busy, 1 if it is ready
 206  */
 207 static int bf5xx_nand_devready(struct mtd_info *mtd)
 208 {
 209         unsigned short val = bfin_read_NFC_STAT();
 210
 211         if ((val & NBUSY) == NBUSY)
 212                 return 1;
 213         else
 214                 return 0;
 215 }
 216
 217 /*
 218  * ECC functions
 219  * These allow the bf5xx to use the controller's ECC
 220  * generator block to ECC the data as it passes through
 221  */
 222
 223 /*
 224  * ECC error correction function
 225  */
 226 static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
 227                                         u_char *read_ecc, u_char *calc_ecc)
 228 {
 229         struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
 230         u32 syndrome[5];
 231         u32 calced, stored;
 232         int i;
 233         unsigned short failing_bit, failing_byte;
 234         u_char data;
 235
 236         calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16);
 237         stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16);
 238
 239         syndrome[0] = (calced ^ stored);
 240
 241         /*
 242          * syndrome 0: all zero
 243          * No error in data
 244          * No action
 245          */
 246         if (!syndrome[0] || !calced || !stored)
 247                 return 0;
 248
 249         /*
 250          * sysdrome 0: only one bit is one
 251          * ECC data was incorrect
 252          * No action
 253          */
 254         if (hweight32(syndrome[0]) == 1) {
 255                 dev_err(info->device, "ECC data was incorrect!\n");
 256                 return 1;
 257         }
 258
 259         syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
 260         syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF);
 261         syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF);
 262         syndrome[4] = syndrome[2] ^ syndrome[3];
 263
 264         for (i = 0; i < 5; i++)
 265                 dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]);
 266
 267         dev_info(info->device,
 268                 "calced[0x%08x], stored[0x%08x]\n",
 269                 calced, stored);
 270
 271         /*
 272          * sysdrome 0: exactly 11 bits are one, each parity
 273          * and parity' pair is 1 & 0 or 0 & 1.
 274          * 1-bit correctable error
 275          * Correct the error
 276          */
 277         if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) {
 278                 dev_info(info->device,
 279                         "1-bit correctable error, correct it.\n");
 280                 dev_info(info->device,
 281                         "syndrome[1] 0x%08x\n", syndrome[1]);
 282
 283                 failing_bit = syndrome[1] & 0x7;
 284                 failing_byte = syndrome[1] >> 0x3;
 285                 data = *(dat + failing_byte);
 286                 data = data ^ (0x1 << failing_bit);
 287                 *(dat + failing_byte) = data;
 288
 289                 return 0;
 290         }
 291
 292         /*
 293          * sysdrome 0: random data
 294          * More than 1-bit error, non-correctable error
 295          * Discard data, mark bad block
 296          */
 297         dev_err(info->device,
 298                 "More than 1-bit error, non-correctable error.\n");
 299         dev_err(info->device,
 300                 "Please discard data, mark bad block\n");
 301
 302         return 1;
 303 }
 304
 305 static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 306                                         u_char *read_ecc, u_char *calc_ecc)
 307 {
 308         struct nand_chip *chip = mtd->priv;
 309         int ret;
 310
 311         ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 312
 313         /* If ecc size is 512, correct second 256 bytes */
 314         if (chip->ecc.size == 512) {
 315                 dat += 256;
 316                 read_ecc += 3;
 317                 calc_ecc += 3;
 318                 ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 319         }
 320
 321         return ret;
 322 }
 323
 324 static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 325 {
 326         return;
 327 }
 328
 329 static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 330                 const u_char *dat, u_char *ecc_code)
 331 {
 332         struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
 333         struct nand_chip *chip = mtd->priv;
 334         u16 ecc0, ecc1;
 335         u32 code[2];
 336         u8 *p;
 337
 338         /* first 3 bytes ECC code for 256 page size */
 339         ecc0 = bfin_read_NFC_ECC0();
 340         ecc1 = bfin_read_NFC_ECC1();
 341
 342         code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 343
 344         dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 345
 346         p = (u8 *) code;
 347         memcpy(ecc_code, p, 3);
 348
 349         /* second 3 bytes ECC code for 512 ecc size */
 350         if (chip->ecc.size == 512) {
 351                 ecc0 = bfin_read_NFC_ECC2();
 352                 ecc1 = bfin_read_NFC_ECC3();
 353                 code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 354
 355                 /* second 3 bytes in ecc_code for second 256
 356                  * bytes of 512 page size
 357                  */
 358                 p = (u8 *) (code + 1);
 359                 memcpy((ecc_code + 3), p, 3);
 360                 dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
 361         }
 362
 363         return 0;
 364 }
 365
 366 /*
 367  * PIO mode for buffer writing and reading
 368  */
 369 static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 370 {
 371         int i;
 372         unsigned short val;
 373
 374         /*
 375          * Data reads are requested by first writing to NFC_DATA_RD
 376          * and then reading back from NFC_READ.
 377          */
 378         for (i = 0; i < len; i++) {
 379                 while (bfin_read_NFC_STAT() & WB_FULL)
 380                         cpu_relax();
 381
 382                 /* Contents do not matter */
 383                 bfin_write_NFC_DATA_RD(0x0000);
 384                 SSYNC();
 385
 386                 while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY)
 387                         cpu_relax();
 388
 389                 buf[i] = bfin_read_NFC_READ();
 390
 391                 val = bfin_read_NFC_IRQSTAT();
 392                 val |= RD_RDY;
 393                 bfin_write_NFC_IRQSTAT(val);
 394                 SSYNC();
 395         }
 396 }
 397
 398 static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd)
 399 {
 400         uint8_t val;
 401
 402         bf5xx_nand_read_buf(mtd, &val, 1);
 403
 404         return val;
 405 }
 406
 407 static void bf5xx_nand_write_buf(struct mtd_info *mtd,
 408                                 const uint8_t *buf, int len)
 409 {
 410         int i;
 411
 412         for (i = 0; i < len; i++) {
 413                 while (bfin_read_NFC_STAT() & WB_FULL)
 414                         cpu_relax();
 415
 416                 bfin_write_NFC_DATA_WR(buf[i]);
 417                 SSYNC();
 418         }
 419 }
 420
 421 static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
 422 {
 423         int i;
 424         u16 *p = (u16 *) buf;
 425         len >>= 1;
 426
 427         /*
 428          * Data reads are requested by first writing to NFC_DATA_RD
 429          * and then reading back from NFC_READ.
 430          */
 431         bfin_write_NFC_DATA_RD(0x5555);
 432
 433         SSYNC();
 434
 435         for (i = 0; i < len; i++)
 436                 p[i] = bfin_read_NFC_READ();
 437 }
 438
 439 static void bf5xx_nand_write_buf16(struct mtd_info *mtd,
 440                                 const uint8_t *buf, int len)
 441 {
 442         int i;
 443         u16 *p = (u16 *) buf;
 444         len >>= 1;
 445
 446         for (i = 0; i < len; i++)
 447                 bfin_write_NFC_DATA_WR(p[i]);
 448
 449         SSYNC();
 450 }
 451
 452 /*
 453  * DMA functions for buffer writing and reading
 454  */
 455 static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
 456 {
 457         struct bf5xx_nand_info *info = dev_id;
 458
 459         clear_dma_irqstat(CH_NFC);
 460         disable_dma(CH_NFC);
 461         complete(&info->dma_completion);
 462
 463         return IRQ_HANDLED;
 464 }
 465
 466 static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 467                                 uint8_t *buf, int is_read)
 468 {
 469         struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
 470         struct nand_chip *chip = mtd->priv;
 471         unsigned short val;
 472
 473         dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
 474                         mtd, buf, is_read);
 475
 476         /*
 477          * Before starting a dma transfer, be sure to invalidate/flush
 478          * the cache over the address range of your DMA buffer to
 479          * prevent cache coherency problems. Otherwise very subtle bugs
 480          * can be introduced to your driver.
 481          */
 482         if (is_read)
 483                 invalidate_dcache_range((unsigned int)buf,
 484                                 (unsigned int)(buf + chip->ecc.size));
 485         else
 486                 flush_dcache_range((unsigned int)buf,
 487                                 (unsigned int)(buf + chip->ecc.size));
 488
 489         /*
 490          * This register must be written before each page is
 491          * transferred to generate the correct ECC register
 492          * values.
 493          */
 494         bfin_write_NFC_RST(ECC_RST);
 495         SSYNC();
 496         while (bfin_read_NFC_RST() & ECC_RST)
 497                 cpu_relax();
 498
 499         disable_dma(CH_NFC);
 500         clear_dma_irqstat(CH_NFC);
 501
 502         /* setup DMA register with Blackfin DMA API */
 503         set_dma_config(CH_NFC, 0x0);
 504         set_dma_start_addr(CH_NFC, (unsigned long) buf);
 505
 506         /* The DMAs have different size on BF52x and BF54x */
 507 #ifdef CONFIG_BF52x
 508         set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
 509         set_dma_x_modify(CH_NFC, 2);
 510         val = DI_EN | WDSIZE_16;
 511 #endif
 512
 513 #ifdef CONFIG_BF54x
 514         set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
 515         set_dma_x_modify(CH_NFC, 4);
 516         val = DI_EN | WDSIZE_32;
 517 #endif
 518         /* setup write or read operation */
 519         if (is_read)
 520                 val |= WNR;
 521         set_dma_config(CH_NFC, val);
 522         enable_dma(CH_NFC);
 523
 524         /* Start PAGE read/write operation */
 525         if (is_read)
 526                 bfin_write_NFC_PGCTL(PG_RD_START);
 527         else
 528                 bfin_write_NFC_PGCTL(PG_WR_START);
 529         wait_for_completion(&info->dma_completion);
 530 }
 531
 532 static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
 533                                         uint8_t *buf, int len)
 534 {
 535         struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
 536         struct nand_chip *chip = mtd->priv;
 537
 538         dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
 539
 540         if (len == chip->ecc.size)
 541                 bf5xx_nand_dma_rw(mtd, buf, 1);
 542         else
 543                 bf5xx_nand_read_buf(mtd, buf, len);
 544 }
 545
 546 static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 547                                 const uint8_t *buf, int len)
 548 {
 549         struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
 550         struct nand_chip *chip = mtd->priv;
 551
 552         dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
 553
 554         if (len == chip->ecc.size)
 555                 bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
 556         else
 557                 bf5xx_nand_write_buf(mtd, buf, len);
 558 }
 559
 560 static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 561                 uint8_t *buf, int oob_required, int page)
 562 {
 563         bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
 564         bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 565
 566         return 0;
 567 }
 568
 569 static int bf5xx_nand_write_page_raw(struct mtd_info *mtd,
 570                 struct nand_chip *chip, const uint8_t *buf, int oob_required)
 571 {
 572         bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
 573         bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 574
 575         return 0;
 576 }
 577
 578 /*
 579  * System initialization functions
 580  */
 581 static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 582 {
 583         int ret;
 584
 585         /* Do not use dma */
 586         if (!hardware_ecc)
 587                 return 0;
 588
 589         init_completion(&info->dma_completion);
 590
 591         /* Request NFC DMA channel */
 592         ret = request_dma(CH_NFC, "BF5XX NFC driver");
 593         if (ret < 0) {
 594                 dev_err(info->device, " unable to get DMA channel\n");
 595                 return ret;
 596         }
 597
 598 #ifdef CONFIG_BF54x
 599         /* Setup DMAC1 channel mux for NFC which shared with SDH */
 600         bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() & ~1);
 601         SSYNC();
 602 #endif
 603
 604         set_dma_callback(CH_NFC, bf5xx_nand_dma_irq, info);
 605
 606         /* Turn off the DMA channel first */
 607         disable_dma(CH_NFC);
 608         return 0;
 609 }
 610
 611 static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
 612 {
 613         /* Free NFC DMA channel */
 614         if (hardware_ecc)
 615                 free_dma(CH_NFC);
 616 }
 617
 618 /*
 619  * BF5XX NFC hardware initialization
 620  *  - pin mux setup
 621  *  - clear interrupt status
 622  */
 623 static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
 624 {
 625         int err = 0;
 626         unsigned short val;
 627         struct bf5xx_nand_platform *plat = info->platform;
 628
 629         /* setup NFC_CTL register */
 630         dev_info(info->device,
 631                 "data_width=%d, wr_dly=%d, rd_dly=%d\n",
 632                 (plat->data_width ? 16 : 8),
 633                 plat->wr_dly, plat->rd_dly);
 634
 635         val = (1 << NFC_PG_SIZE_OFFSET) |
 636                 (plat->data_width << NFC_NWIDTH_OFFSET) |
 637                 (plat->rd_dly << NFC_RDDLY_OFFSET) |
 638                 (plat->wr_dly << NFC_WRDLY_OFFSET);
 639         dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
 640
 641         bfin_write_NFC_CTL(val);
 642         SSYNC();
 643
 644         /* clear interrupt status */
 645         bfin_write_NFC_IRQMASK(0x0);
 646         SSYNC();
 647         val = bfin_read_NFC_IRQSTAT();
 648         bfin_write_NFC_IRQSTAT(val);
 649         SSYNC();
 650
 651         /* DMA initialization  */
 652         if (bf5xx_nand_dma_init(info))
 653                 err = -ENXIO;
 654
 655         return err;
 656 }
 657
 658 /*
 659  * Device management interface
 660  */
 661 static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 662 {
 663         struct mtd_info *mtd = &info->mtd;
 664         struct mtd_partition *parts = info->platform->partitions;
 665         int nr = info->platform->nr_partitions;
 666
 667         return mtd_device_register(mtd, parts, nr);
 668 }
 669
 670 static int bf5xx_nand_remove(struct platform_device *pdev)
 671 {
 672         struct bf5xx_nand_info *info = to_nand_info(pdev);
 673
 674         platform_set_drvdata(pdev, NULL);
 675
 676         /* first thing we need to do is release all our mtds
 677          * and their partitions, then go through freeing the
 678          * resources used
 679          */
 680         nand_release(&info->mtd);
 681
 682         peripheral_free_list(bfin_nfc_pin_req);
 683         bf5xx_nand_dma_remove(info);
 684
 685         /* free the common resources */
 686         kfree(info);
 687
 688         return 0;
 689 }
 690
 691 static int bf5xx_nand_scan(struct mtd_info *mtd)
 692 {
 693         struct nand_chip *chip = mtd->priv;
 694         int ret;
 695
 696         ret = nand_scan_ident(mtd, 1, NULL);
 697         if (ret)
 698                 return ret;
 699
 700         if (hardware_ecc) {
 701                 /*
 702                  * for nand with page size > 512B, think it as several sections with 512B
 703                  */
 704                 if (likely(mtd->writesize >= 512)) {
 705                         chip->ecc.size = 512;
 706                         chip->ecc.bytes = 6;
 707                         chip->ecc.strength = 2;
 708                 } else {
 709                         chip->ecc.size = 256;
 710                         chip->ecc.bytes = 3;
 711                         chip->ecc.strength = 1;
 712                         bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
 713                         SSYNC();
 714                 }
 715         }
 716
 717         return  nand_scan_tail(mtd);
 718 }
 719
 720 /*
 721  * bf5xx_nand_probe
 722  *
 723  * called by device layer when it finds a device matching
 724  * one our driver can handled. This code checks to see if
 725  * it can allocate all necessary resources then calls the
 726  * nand layer to look for devices
 727  */
 728 static int bf5xx_nand_probe(struct platform_device *pdev)
 729 {
 730         struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
 731         struct bf5xx_nand_info *info = NULL;
 732         struct nand_chip *chip = NULL;
 733         struct mtd_info *mtd = NULL;
 734         int err = 0;
 735
 736         dev_dbg(&pdev->dev, "(%p)\n", pdev);
 737
 738         if (!plat) {
 739                 dev_err(&pdev->dev, "no platform specific information\n");
 740                 return -EINVAL;
 741         }
 742
 743         if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
 744                 dev_err(&pdev->dev, "requesting Peripherals failed\n");
 745                 return -EFAULT;
 746         }
 747
 748         info = kzalloc(sizeof(*info), GFP_KERNEL);
 749         if (info == NULL) {
 750                 dev_err(&pdev->dev, "no memory for flash info\n");
 751                 err = -ENOMEM;
 752                 goto out_err_kzalloc;
 753         }
 754
 755         platform_set_drvdata(pdev, info);
 756
 757         spin_lock_init(&info->controller.lock);
 758         init_waitqueue_head(&info->controller.wq);
 759
 760         info->device     = &pdev->dev;
 761         info->platform   = plat;
 762
 763         /* initialise chip data struct */
 764         chip = &info->chip;
 765
 766         if (plat->data_width)
 767                 chip->options |= NAND_BUSWIDTH_16;
 768
 769         chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN;
 770
 771         chip->read_buf = (plat->data_width) ?
 772                 bf5xx_nand_read_buf16 : bf5xx_nand_read_buf;
 773         chip->write_buf = (plat->data_width) ?
 774                 bf5xx_nand_write_buf16 : bf5xx_nand_write_buf;
 775
 776         chip->read_byte    = bf5xx_nand_read_byte;
 777
 778         chip->cmd_ctrl     = bf5xx_nand_hwcontrol;
 779         chip->dev_ready    = bf5xx_nand_devready;
 780
 781         chip->priv         = &info->mtd;
 782         chip->controller   = &info->controller;
 783
 784         chip->IO_ADDR_R    = (void __iomem *) NFC_READ;
 785         chip->IO_ADDR_W    = (void __iomem *) NFC_DATA_WR;
 786
 787         chip->chip_delay   = 0;
 788
 789         /* initialise mtd info data struct */
 790         mtd             = &info->mtd;
 791         mtd->priv       = chip;
 792         mtd->owner      = THIS_MODULE;
 793
 794         /* initialise the hardware */
 795         err = bf5xx_nand_hw_init(info);
 796         if (err)
 797                 goto out_err_hw_init;
 798
 799         /* setup hardware ECC data struct */
 800         if (hardware_ecc) {
 801 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
 802                 chip->ecc.layout = &bootrom_ecclayout;
 803 #endif
 804                 chip->read_buf      = bf5xx_nand_dma_read_buf;
 805                 chip->write_buf     = bf5xx_nand_dma_write_buf;
 806                 chip->ecc.calculate = bf5xx_nand_calculate_ecc;
 807                 chip->ecc.correct   = bf5xx_nand_correct_data;
 808                 chip->ecc.mode      = NAND_ECC_HW;
 809                 chip->ecc.hwctl     = bf5xx_nand_enable_hwecc;
 810                 chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
 811                 chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
 812         } else {
 813                 chip->ecc.mode      = NAND_ECC_SOFT;
 814         }
 815
 816         /* scan hardware nand chip and setup mtd info data struct */
 817         if (bf5xx_nand_scan(mtd)) {
 818                 err = -ENXIO;
 819                 goto out_err_nand_scan;
 820         }
 821
 822 #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
 823         chip->badblockpos = 63;
 824 #endif
 825
 826         /* add NAND partition */
 827         bf5xx_nand_add_partition(info);
 828
 829         dev_dbg(&pdev->dev, "initialised ok\n");
 830         return 0;
 831
 832 out_err_nand_scan:
 833         bf5xx_nand_dma_remove(info);
 834 out_err_hw_init:
 835         platform_set_drvdata(pdev, NULL);
 836         kfree(info);
 837 out_err_kzalloc:
 838         peripheral_free_list(bfin_nfc_pin_req);
 839
 840         return err;
 841 }
 842
 843 /* PM Support */
 844 #ifdef CONFIG_PM
 845
 846 static int bf5xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
 847 {
 848         struct bf5xx_nand_info *info = platform_get_drvdata(dev);
 849
 850         return 0;
 851 }
 852
 853 static int bf5xx_nand_resume(struct platform_device *dev)
 854 {
 855         struct bf5xx_nand_info *info = platform_get_drvdata(dev);
 856
 857         return 0;
 858 }
 859
 860 #else
 861 #define bf5xx_nand_suspend NULL
 862 #define bf5xx_nand_resume NULL
 863 #endif
 864
 865 /* driver device registration */
 866 static struct platform_driver bf5xx_nand_driver = {
 867         .probe          = bf5xx_nand_probe,
 868         .remove         = bf5xx_nand_remove,
 869         .suspend        = bf5xx_nand_suspend,
 870         .resume         = bf5xx_nand_resume,
 871         .driver         = {
 872                 .name   = DRV_NAME,
 873                 .owner  = THIS_MODULE,
 874         },
 875 };
 876
 877 module_platform_driver(bf5xx_nand_driver);
 878
 879 MODULE_LICENSE("GPL");
 880 MODULE_AUTHOR(DRV_AUTHOR);
 881 MODULE_DESCRIPTION(DRV_DESC);
 882 MODULE_ALIAS("platform:" DRV_NAME);