projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
drivers: power: report battery voltage in AOSP compatible format
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / tuners / xc5000.c
1 /*
2 * Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
3 *
4 * Copyright (c) 2007 Xceive Corporation
5 * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
6 * Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 *
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24 #include <linux/module.h>
25 #include <linux/moduleparam.h>
26 #include <linux/videodev2.h>
27 #include <linux/delay.h>
28 #include <linux/dvb/frontend.h>
29 #include <linux/i2c.h>
30
31 #include "dvb_frontend.h"
32
33 #include "xc5000.h"
34 #include "tuner-i2c.h"
35
36 static int debug;
37 module_param(debug, int, 0644);
38 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
39
40 static int no_poweroff;
41 module_param(no_poweroff, int, 0644);
42 MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
43 "\t\t1 keep device energized and with tuner ready all the times.\n"
44 "\t\tFaster, but consumes more power and keeps the device hotter");
45
46 static DEFINE_MUTEX(xc5000_list_mutex);
47 static LIST_HEAD(hybrid_tuner_instance_list);
48
49 #define dprintk(level, fmt, arg...) if (debug >= level) \
50 printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
51
52 struct xc5000_priv {
53 struct tuner_i2c_props i2c_props;
54 struct list_head hybrid_tuner_instance_list;
55
56 u32 if_khz;
57 u16 xtal_khz;
58 u32 freq_hz, freq_offset;
59 u32 bandwidth;
60 u8 video_standard;
61 u8 rf_mode;
62 u8 radio_input;
63
64 int chip_id;
65 u16 pll_register_no;
66 u8 init_status_supported;
67 u8 fw_checksum_supported;
68 };
69
70 /* Misc Defines */
71 #define MAX_TV_STANDARD 24
72 #define XC_MAX_I2C_WRITE_LENGTH 64
73
74 /* Signal Types */
75 #define XC_RF_MODE_AIR 0
76 #define XC_RF_MODE_CABLE 1
77
78 /* Result codes */
79 #define XC_RESULT_SUCCESS 0
80 #define XC_RESULT_RESET_FAILURE 1
81 #define XC_RESULT_I2C_WRITE_FAILURE 2
82 #define XC_RESULT_I2C_READ_FAILURE 3
83 #define XC_RESULT_OUT_OF_RANGE 5
84
85 /* Product id */
86 #define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000
87 #define XC_PRODUCT_ID_FW_LOADED 0x1388
88
89 /* Registers */
90 #define XREG_INIT 0x00
91 #define XREG_VIDEO_MODE 0x01
92 #define XREG_AUDIO_MODE 0x02
93 #define XREG_RF_FREQ 0x03
94 #define XREG_D_CODE 0x04
95 #define XREG_IF_OUT 0x05
96 #define XREG_SEEK_MODE 0x07
97 #define XREG_POWER_DOWN 0x0A /* Obsolete */
98 /* Set the output amplitude - SIF for analog, DTVP/DTVN for digital */
99 #define XREG_OUTPUT_AMP 0x0B
100 #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
101 #define XREG_SMOOTHEDCVBS 0x0E
102 #define XREG_XTALFREQ 0x0F
103 #define XREG_FINERFREQ 0x10
104 #define XREG_DDIMODE 0x11
105
106 #define XREG_ADC_ENV 0x00
107 #define XREG_QUALITY 0x01
108 #define XREG_FRAME_LINES 0x02
109 #define XREG_HSYNC_FREQ 0x03
110 #define XREG_LOCK 0x04
111 #define XREG_FREQ_ERROR 0x05
112 #define XREG_SNR 0x06
113 #define XREG_VERSION 0x07
114 #define XREG_PRODUCT_ID 0x08
115 #define XREG_BUSY 0x09
116 #define XREG_BUILD 0x0D
117 #define XREG_TOTALGAIN 0x0F
118 #define XREG_FW_CHECKSUM 0x12
119 #define XREG_INIT_STATUS 0x13
120
121 /*
122 Basic firmware description. This will remain with
123 the driver for documentation purposes.
124
125 This represents an I2C firmware file encoded as a
126 string of unsigned char. Format is as follows:
127
128 char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB
129 char[1 ]=len0_LSB -> length of first write transaction
130 char[2 ]=data0 -> first byte to be sent
131 char[3 ]=data1
132 char[4 ]=data2
133 char[ ]=...
134 char[M ]=dataN -> last byte to be sent
135 char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB
136 char[M+2]=len1_LSB -> length of second write transaction
137 char[M+3]=data0
138 char[M+4]=data1
139 ...
140 etc.
141
142 The [len] value should be interpreted as follows:
143
144 len= len_MSB _ len_LSB
145 len=1111_1111_1111_1111 : End of I2C_SEQUENCE
146 len=0000_0000_0000_0000 : Reset command: Do hardware reset
147 len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767)
148 len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms
149
150 For the RESET and WAIT commands, the two following bytes will contain
151 immediately the length of the following transaction.
152
153 */
154 struct XC_TV_STANDARD {
155 char *Name;
156 u16 AudioMode;
157 u16 VideoMode;
158 };
159
160 /* Tuner standards */
161 #define MN_NTSC_PAL_BTSC 0
162 #define MN_NTSC_PAL_A2 1
163 #define MN_NTSC_PAL_EIAJ 2
164 #define MN_NTSC_PAL_Mono 3
165 #define BG_PAL_A2 4
166 #define BG_PAL_NICAM 5
167 #define BG_PAL_MONO 6
168 #define I_PAL_NICAM 7
169 #define I_PAL_NICAM_MONO 8
170 #define DK_PAL_A2 9
171 #define DK_PAL_NICAM 10
172 #define DK_PAL_MONO 11
173 #define DK_SECAM_A2DK1 12
174 #define DK_SECAM_A2LDK3 13
175 #define DK_SECAM_A2MONO 14
176 #define L_SECAM_NICAM 15
177 #define LC_SECAM_NICAM 16
178 #define DTV6 17
179 #define DTV8 18
180 #define DTV7_8 19
181 #define DTV7 20
182 #define FM_Radio_INPUT2 21
183 #define FM_Radio_INPUT1 22
184 #define FM_Radio_INPUT1_MONO 23
185
186 static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
187 {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
188 {"M/N-NTSC/PAL-A2", 0x0600, 0x8020},
189 {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
190 {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
191 {"B/G-PAL-A2", 0x0A00, 0x8049},
192 {"B/G-PAL-NICAM", 0x0C04, 0x8049},
193 {"B/G-PAL-MONO", 0x0878, 0x8059},
194 {"I-PAL-NICAM", 0x1080, 0x8009},
195 {"I-PAL-NICAM-MONO", 0x0E78, 0x8009},
196 {"D/K-PAL-A2", 0x1600, 0x8009},
197 {"D/K-PAL-NICAM", 0x0E80, 0x8009},
198 {"D/K-PAL-MONO", 0x1478, 0x8009},
199 {"D/K-SECAM-A2 DK1", 0x1200, 0x8009},
200 {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
201 {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
202 {"L-SECAM-NICAM", 0x8E82, 0x0009},
203 {"L'-SECAM-NICAM", 0x8E82, 0x4009},
204 {"DTV6", 0x00C0, 0x8002},
205 {"DTV8", 0x00C0, 0x800B},
206 {"DTV7/8", 0x00C0, 0x801B},
207 {"DTV7", 0x00C0, 0x8007},
208 {"FM Radio-INPUT2", 0x9802, 0x9002},
209 {"FM Radio-INPUT1", 0x0208, 0x9002},
210 {"FM Radio-INPUT1_MONO", 0x0278, 0x9002}
211 };
212
213
214 struct xc5000_fw_cfg {
215 char *name;
216 u16 size;
217 u16 pll_reg;
218 u8 init_status_supported;
219 u8 fw_checksum_supported;
220 };
221
222 #define XC5000A_FIRMWARE "dvb-fe-xc5000-1.6.114.fw"
223 static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
224 .name = XC5000A_FIRMWARE,
225 .size = 12401,
226 .pll_reg = 0x806c,
227 };
228
229 #define XC5000C_FIRMWARE "dvb-fe-xc5000c-4.1.30.7.fw"
230 static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
231 .name = XC5000C_FIRMWARE,
232 .size = 16497,
233 .pll_reg = 0x13,
234 .init_status_supported = 1,
235 .fw_checksum_supported = 1,
236 };
237
238 static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
239 {
240 switch (chip_id) {
241 default:
242 case XC5000A:
243 return &xc5000a_1_6_114;
244 case XC5000C:
245 return &xc5000c_41_024_5;
246 }
247 }
248
249 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force);
250 static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
251 static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val);
252 static int xc5000_TunerReset(struct dvb_frontend *fe);
253
254 static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
255 {
256 struct i2c_msg msg = { .addr = priv->i2c_props.addr,
257 .flags = 0, .buf = buf, .len = len };
258
259 if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
260 printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
261 return XC_RESULT_I2C_WRITE_FAILURE;
262 }
263 return XC_RESULT_SUCCESS;
264 }
265
266 #if 0
267 /* This routine is never used because the only time we read data from the
268 i2c bus is when we read registers, and we want that to be an atomic i2c
269 transaction in case we are on a multi-master bus */
270 static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
271 {
272 struct i2c_msg msg = { .addr = priv->i2c_props.addr,
273 .flags = I2C_M_RD, .buf = buf, .len = len };
274
275 if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
276 printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
277 return -EREMOTEIO;
278 }
279 return 0;
280 }
281 #endif
282
283 static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
284 {
285 u8 buf[2] = { reg >> 8, reg & 0xff };
286 u8 bval[2] = { 0, 0 };
287 struct i2c_msg msg[2] = {
288 { .addr = priv->i2c_props.addr,
289 .flags = 0, .buf = &buf[0], .len = 2 },
290 { .addr = priv->i2c_props.addr,
291 .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
292 };
293
294 if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
295 printk(KERN_WARNING "xc5000: I2C read failed\n");
296 return -EREMOTEIO;
297 }
298
299 *val = (bval[0] << 8) | bval[1];
300 return XC_RESULT_SUCCESS;
301 }
302
303 static void xc_wait(int wait_ms)
304 {
305 msleep(wait_ms);
306 }
307
308 static int xc5000_TunerReset(struct dvb_frontend *fe)
309 {
310 struct xc5000_priv *priv = fe->tuner_priv;
311 int ret;
312
313 dprintk(1, "%s()\n", __func__);
314
315 if (fe->callback) {
316 ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
317 fe->dvb->priv :
318 priv->i2c_props.adap->algo_data,
319 DVB_FRONTEND_COMPONENT_TUNER,
320 XC5000_TUNER_RESET, 0);
321 if (ret) {
322 printk(KERN_ERR "xc5000: reset failed\n");
323 return XC_RESULT_RESET_FAILURE;
324 }
325 } else {
326 printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
327 return XC_RESULT_RESET_FAILURE;
328 }
329 return XC_RESULT_SUCCESS;
330 }
331
332 static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
333 {
334 u8 buf[4];
335 int WatchDogTimer = 100;
336 int result;
337
338 buf[0] = (regAddr >> 8) & 0xFF;
339 buf[1] = regAddr & 0xFF;
340 buf[2] = (i2cData >> 8) & 0xFF;
341 buf[3] = i2cData & 0xFF;
342 result = xc_send_i2c_data(priv, buf, 4);
343 if (result == XC_RESULT_SUCCESS) {
344 /* wait for busy flag to clear */
345 while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
346 result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
347 if (result == XC_RESULT_SUCCESS) {
348 if ((buf[0] == 0) && (buf[1] == 0)) {
349 /* busy flag cleared */
350 break;
351 } else {
352 xc_wait(5); /* wait 5 ms */
353 WatchDogTimer--;
354 }
355 }
356 }
357 }
358 if (WatchDogTimer <= 0)
359 result = XC_RESULT_I2C_WRITE_FAILURE;
360
361 return result;
362 }
363
364 static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
365 {
366 struct xc5000_priv *priv = fe->tuner_priv;
367
368 int i, nbytes_to_send, result;
369 unsigned int len, pos, index;
370 u8 buf[XC_MAX_I2C_WRITE_LENGTH];
371
372 index = 0;
373 while ((i2c_sequence[index] != 0xFF) ||
374 (i2c_sequence[index + 1] != 0xFF)) {
375 len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
376 if (len == 0x0000) {
377 /* RESET command */
378 result = xc5000_TunerReset(fe);
379 index += 2;
380 if (result != XC_RESULT_SUCCESS)
381 return result;
382 } else if (len & 0x8000) {
383 /* WAIT command */
384 xc_wait(len & 0x7FFF);
385 index += 2;
386 } else {
387 /* Send i2c data whilst ensuring individual transactions
388 * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
389 */
390 index += 2;
391 buf[0] = i2c_sequence[index];
392 buf[1] = i2c_sequence[index + 1];
393 pos = 2;
394 while (pos < len) {
395 if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
396 nbytes_to_send =
397 XC_MAX_I2C_WRITE_LENGTH;
398 else
399 nbytes_to_send = (len - pos + 2);
400 for (i = 2; i < nbytes_to_send; i++) {
401 buf[i] = i2c_sequence[index + pos +
402 i - 2];
403 }
404 result = xc_send_i2c_data(priv, buf,
405 nbytes_to_send);
406
407 if (result != XC_RESULT_SUCCESS)
408 return result;
409
410 pos += nbytes_to_send - 2;
411 }
412 index += len;
413 }
414 }
415 return XC_RESULT_SUCCESS;
416 }
417
418 static int xc_initialize(struct xc5000_priv *priv)
419 {
420 dprintk(1, "%s()\n", __func__);
421 return xc_write_reg(priv, XREG_INIT, 0);
422 }
423
424 static int xc_SetTVStandard(struct xc5000_priv *priv,
425 u16 VideoMode, u16 AudioMode, u8 RadioMode)
426 {
427 int ret;
428 dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
429 if (RadioMode) {
430 dprintk(1, "%s() Standard = %s\n",
431 __func__,
432 XC5000_Standard[RadioMode].Name);
433 } else {
434 dprintk(1, "%s() Standard = %s\n",
435 __func__,
436 XC5000_Standard[priv->video_standard].Name);
437 }
438
439 ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
440 if (ret == XC_RESULT_SUCCESS)
441 ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
442
443 return ret;
444 }
445
446 static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
447 {
448 dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
449 rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
450
451 if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
452 rf_mode = XC_RF_MODE_CABLE;
453 printk(KERN_ERR
454 "%s(), Invalid mode, defaulting to CABLE",
455 __func__);
456 }
457 return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
458 }
459
460 static const struct dvb_tuner_ops xc5000_tuner_ops;
461
462 static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
463 {
464 u16 freq_code;
465
466 dprintk(1, "%s(%u)\n", __func__, freq_hz);
467
468 if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
469 (freq_hz < xc5000_tuner_ops.info.frequency_min))
470 return XC_RESULT_OUT_OF_RANGE;
471
472 freq_code = (u16)(freq_hz / 15625);
473
474 /* Starting in firmware version 1.1.44, Xceive recommends using the
475 FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
476 only be used for fast scanning for channel lock) */
477 return xc_write_reg(priv, XREG_FINERFREQ, freq_code);
478 }
479
480
481 static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
482 {
483 u32 freq_code = (freq_khz * 1024)/1000;
484 dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
485 __func__, freq_khz, freq_code);
486
487 return xc_write_reg(priv, XREG_IF_OUT, freq_code);
488 }
489
490
491 static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
492 {
493 return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope);
494 }
495
496 static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
497 {
498 int result;
499 u16 regData;
500 u32 tmp;
501
502 result = xc5000_readreg(priv, XREG_FREQ_ERROR, &regData);
503 if (result != XC_RESULT_SUCCESS)
504 return result;
505
506 tmp = (u32)regData;
507 (*freq_error_hz) = (tmp * 15625) / 1000;
508 return result;
509 }
510
511 static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
512 {
513 return xc5000_readreg(priv, XREG_LOCK, lock_status);
514 }
515
516 static int xc_get_version(struct xc5000_priv *priv,
517 u8 *hw_majorversion, u8 *hw_minorversion,
518 u8 *fw_majorversion, u8 *fw_minorversion)
519 {
520 u16 data;
521 int result;
522
523 result = xc5000_readreg(priv, XREG_VERSION, &data);
524 if (result != XC_RESULT_SUCCESS)
525 return result;
526
527 (*hw_majorversion) = (data >> 12) & 0x0F;
528 (*hw_minorversion) = (data >> 8) & 0x0F;
529 (*fw_majorversion) = (data >> 4) & 0x0F;
530 (*fw_minorversion) = data & 0x0F;
531
532 return 0;
533 }
534
535 static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev)
536 {
537 return xc5000_readreg(priv, XREG_BUILD, buildrev);
538 }
539
540 static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
541 {
542 u16 regData;
543 int result;
544
545 result = xc5000_readreg(priv, XREG_HSYNC_FREQ, &regData);
546 if (result != XC_RESULT_SUCCESS)
547 return result;
548
549 (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
550 return result;
551 }
552
553 static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
554 {
555 return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines);
556 }
557
558 static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
559 {
560 return xc5000_readreg(priv, XREG_QUALITY, quality);
561 }
562
563 static int xc_get_analogsnr(struct xc5000_priv *priv, u16 *snr)
564 {
565 return xc5000_readreg(priv, XREG_SNR, snr);
566 }
567
568 static int xc_get_totalgain(struct xc5000_priv *priv, u16 *totalgain)
569 {
570 return xc5000_readreg(priv, XREG_TOTALGAIN, totalgain);
571 }
572
573 static u16 WaitForLock(struct xc5000_priv *priv)
574 {
575 u16 lockState = 0;
576 int watchDogCount = 40;
577
578 while ((lockState == 0) && (watchDogCount > 0)) {
579 xc_get_lock_status(priv, &lockState);
580 if (lockState != 1) {
581 xc_wait(5);
582 watchDogCount--;
583 }
584 }
585 return lockState;
586 }
587
588 #define XC_TUNE_ANALOG 0
589 #define XC_TUNE_DIGITAL 1
590 static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
591 {
592 int found = 0;
593
594 dprintk(1, "%s(%u)\n", __func__, freq_hz);
595
596 if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
597 return 0;
598
599 if (mode == XC_TUNE_ANALOG) {
600 if (WaitForLock(priv) == 1)
601 found = 1;
602 }
603
604 return found;
605 }
606
607 static int xc_set_xtal(struct dvb_frontend *fe)
608 {
609 struct xc5000_priv *priv = fe->tuner_priv;
610 int ret = XC_RESULT_SUCCESS;
611
612 switch (priv->chip_id) {
613 default:
614 case XC5000A:
615 /* 32.000 MHz xtal is default */
616 break;
617 case XC5000C:
618 switch (priv->xtal_khz) {
619 default:
620 case 32000:
621 /* 32.000 MHz xtal is default */
622 break;
623 case 31875:
624 /* 31.875 MHz xtal configuration */
625 ret = xc_write_reg(priv, 0x000f, 0x8081);
626 break;
627 }
628 break;
629 }
630 return ret;
631 }
632
633 static int xc5000_fwupload(struct dvb_frontend *fe)
634 {
635 struct xc5000_priv *priv = fe->tuner_priv;
636 const struct firmware *fw;
637 int ret;
638 const struct xc5000_fw_cfg *desired_fw =
639 xc5000_assign_firmware(priv->chip_id);
640 priv->pll_register_no = desired_fw->pll_reg;
641 priv->init_status_supported = desired_fw->init_status_supported;
642 priv->fw_checksum_supported = desired_fw->fw_checksum_supported;
643
644 /* request the firmware, this will block and timeout */
645 printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
646 desired_fw->name);
647
648 ret = request_firmware(&fw, desired_fw->name,
649 priv->i2c_props.adap->dev.parent);
650 if (ret) {
651 printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
652 ret = XC_RESULT_RESET_FAILURE;
653 goto out;
654 } else {
655 printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n",
656 fw->size);
657 ret = XC_RESULT_SUCCESS;
658 }
659
660 if (fw->size != desired_fw->size) {
661 printk(KERN_ERR "xc5000: firmware incorrect size\n");
662 ret = XC_RESULT_RESET_FAILURE;
663 } else {
664 printk(KERN_INFO "xc5000: firmware uploading...\n");
665 ret = xc_load_i2c_sequence(fe, fw->data);
666 if (XC_RESULT_SUCCESS == ret)
667 ret = xc_set_xtal(fe);
668 if (XC_RESULT_SUCCESS == ret)
669 printk(KERN_INFO "xc5000: firmware upload complete...\n");
670 else
671 printk(KERN_ERR "xc5000: firmware upload failed...\n");
672 }
673
674 out:
675 release_firmware(fw);
676 return ret;
677 }
678
679 static void xc_debug_dump(struct xc5000_priv *priv)
680 {
681 u16 adc_envelope;
682 u32 freq_error_hz = 0;
683 u16 lock_status;
684 u32 hsync_freq_hz = 0;
685 u16 frame_lines;
686 u16 quality;
687 u16 snr;
688 u16 totalgain;
689 u8 hw_majorversion = 0, hw_minorversion = 0;
690 u8 fw_majorversion = 0, fw_minorversion = 0;
691 u16 fw_buildversion = 0;
692 u16 regval;
693
694 /* Wait for stats to stabilize.
695 * Frame Lines needs two frame times after initial lock
696 * before it is valid.
697 */
698 xc_wait(100);
699
700 xc_get_ADC_Envelope(priv, &adc_envelope);
701 dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
702
703 xc_get_frequency_error(priv, &freq_error_hz);
704 dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
705
706 xc_get_lock_status(priv, &lock_status);
707 dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
708 lock_status);
709
710 xc_get_version(priv, &hw_majorversion, &hw_minorversion,
711 &fw_majorversion, &fw_minorversion);
712 xc_get_buildversion(priv, &fw_buildversion);
713 dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n",
714 hw_majorversion, hw_minorversion,
715 fw_majorversion, fw_minorversion, fw_buildversion);
716
717 xc_get_hsync_freq(priv, &hsync_freq_hz);
718 dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
719
720 xc_get_frame_lines(priv, &frame_lines);
721 dprintk(1, "*** Frame lines = %d\n", frame_lines);
722
723 xc_get_quality(priv, &quality);
724 dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07);
725
726 xc_get_analogsnr(priv, &snr);
727 dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f);
728
729 xc_get_totalgain(priv, &totalgain);
730 dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256,
731 (totalgain % 256) * 100 / 256);
732
733 if (priv->pll_register_no) {
734 xc5000_readreg(priv, priv->pll_register_no, &regval);
735 dprintk(1, "*** PLL lock status = 0x%04x\n", regval);
736 }
737 }
738
739 static int xc5000_set_params(struct dvb_frontend *fe)
740 {
741 int ret, b;
742 struct xc5000_priv *priv = fe->tuner_priv;
743 u32 bw = fe->dtv_property_cache.bandwidth_hz;
744 u32 freq = fe->dtv_property_cache.frequency;
745 u32 delsys = fe->dtv_property_cache.delivery_system;
746
747 if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
748 dprintk(1, "Unable to load firmware and init tuner\n");
749 return -EINVAL;
750 }
751
752 dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq);
753
754 switch (delsys) {
755 case SYS_ATSC:
756 dprintk(1, "%s() VSB modulation\n", __func__);
757 priv->rf_mode = XC_RF_MODE_AIR;
758 priv->freq_offset = 1750000;
759 priv->video_standard = DTV6;
760 break;
761 case SYS_DVBC_ANNEX_B:
762 dprintk(1, "%s() QAM modulation\n", __func__);
763 priv->rf_mode = XC_RF_MODE_CABLE;
764 priv->freq_offset = 1750000;
765 priv->video_standard = DTV6;
766 break;
767 case SYS_ISDBT:
768 /* All ISDB-T are currently for 6 MHz bw */
769 if (!bw)
770 bw = 6000000;
771 /* fall to OFDM handling */
772 case SYS_DMBTH:
773 case SYS_DVBT:
774 case SYS_DVBT2:
775 dprintk(1, "%s() OFDM\n", __func__);
776 switch (bw) {
777 case 6000000:
778 priv->video_standard = DTV6;
779 priv->freq_offset = 1750000;
780 break;
781 case 7000000:
782 priv->video_standard = DTV7;
783 priv->freq_offset = 2250000;
784 break;
785 case 8000000:
786 priv->video_standard = DTV8;
787 priv->freq_offset = 2750000;
788 break;
789 default:
790 printk(KERN_ERR "xc5000 bandwidth not set!\n");
791 return -EINVAL;
792 }
793 priv->rf_mode = XC_RF_MODE_AIR;
794 break;
795 case SYS_DVBC_ANNEX_A:
796 case SYS_DVBC_ANNEX_C:
797 dprintk(1, "%s() QAM modulation\n", __func__);
798 priv->rf_mode = XC_RF_MODE_CABLE;
799 if (bw <= 6000000) {
800 priv->video_standard = DTV6;
801 priv->freq_offset = 1750000;
802 b = 6;
803 } else if (bw <= 7000000) {
804 priv->video_standard = DTV7;
805 priv->freq_offset = 2250000;
806 b = 7;
807 } else {
808 priv->video_standard = DTV7_8;
809 priv->freq_offset = 2750000;
810 b = 8;
811 }
812 dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,
813 b, bw);
814 break;
815 default:
816 printk(KERN_ERR "xc5000: delivery system is not supported!\n");
817 return -EINVAL;
818 }
819
820 priv->freq_hz = freq - priv->freq_offset;
821
822 dprintk(1, "%s() frequency=%d (compensated to %d)\n",
823 __func__, freq, priv->freq_hz);
824
825 ret = xc_SetSignalSource(priv, priv->rf_mode);
826 if (ret != XC_RESULT_SUCCESS) {
827 printk(KERN_ERR
828 "xc5000: xc_SetSignalSource(%d) failed\n",
829 priv->rf_mode);
830 return -EREMOTEIO;
831 }
832
833 ret = xc_SetTVStandard(priv,
834 XC5000_Standard[priv->video_standard].VideoMode,
835 XC5000_Standard[priv->video_standard].AudioMode, 0);
836 if (ret != XC_RESULT_SUCCESS) {
837 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
838 return -EREMOTEIO;
839 }
840
841 ret = xc_set_IF_frequency(priv, priv->if_khz);
842 if (ret != XC_RESULT_SUCCESS) {
843 printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
844 priv->if_khz);
845 return -EIO;
846 }
847
848 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x8a);
849
850 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
851
852 if (debug)
853 xc_debug_dump(priv);
854
855 priv->bandwidth = bw;
856
857 return 0;
858 }
859
860 static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
861 {
862 struct xc5000_priv *priv = fe->tuner_priv;
863 int ret;
864 u16 id;
865
866 ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
867 if (ret == XC_RESULT_SUCCESS) {
868 if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
869 ret = XC_RESULT_RESET_FAILURE;
870 else
871 ret = XC_RESULT_SUCCESS;
872 }
873
874 dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
875 ret == XC_RESULT_SUCCESS ? "True" : "False", id);
876 return ret;
877 }
878
879 static int xc5000_set_tv_freq(struct dvb_frontend *fe,
880 struct analog_parameters *params)
881 {
882 struct xc5000_priv *priv = fe->tuner_priv;
883 u16 pll_lock_status;
884 int ret;
885
886 dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
887 __func__, params->frequency);
888
889 /* Fix me: it could be air. */
890 priv->rf_mode = params->mode;
891 if (params->mode > XC_RF_MODE_CABLE)
892 priv->rf_mode = XC_RF_MODE_CABLE;
893
894 /* params->frequency is in units of 62.5khz */
895 priv->freq_hz = params->frequency * 62500;
896
897 /* FIX ME: Some video standards may have several possible audio
898 standards. We simply default to one of them here.
899 */
900 if (params->std & V4L2_STD_MN) {
901 /* default to BTSC audio standard */
902 priv->video_standard = MN_NTSC_PAL_BTSC;
903 goto tune_channel;
904 }
905
906 if (params->std & V4L2_STD_PAL_BG) {
907 /* default to NICAM audio standard */
908 priv->video_standard = BG_PAL_NICAM;
909 goto tune_channel;
910 }
911
912 if (params->std & V4L2_STD_PAL_I) {
913 /* default to NICAM audio standard */
914 priv->video_standard = I_PAL_NICAM;
915 goto tune_channel;
916 }
917
918 if (params->std & V4L2_STD_PAL_DK) {
919 /* default to NICAM audio standard */
920 priv->video_standard = DK_PAL_NICAM;
921 goto tune_channel;
922 }
923
924 if (params->std & V4L2_STD_SECAM_DK) {
925 /* default to A2 DK1 audio standard */
926 priv->video_standard = DK_SECAM_A2DK1;
927 goto tune_channel;
928 }
929
930 if (params->std & V4L2_STD_SECAM_L) {
931 priv->video_standard = L_SECAM_NICAM;
932 goto tune_channel;
933 }
934
935 if (params->std & V4L2_STD_SECAM_LC) {
936 priv->video_standard = LC_SECAM_NICAM;
937 goto tune_channel;
938 }
939
940 tune_channel:
941 ret = xc_SetSignalSource(priv, priv->rf_mode);
942 if (ret != XC_RESULT_SUCCESS) {
943 printk(KERN_ERR
944 "xc5000: xc_SetSignalSource(%d) failed\n",
945 priv->rf_mode);
946 return -EREMOTEIO;
947 }
948
949 ret = xc_SetTVStandard(priv,
950 XC5000_Standard[priv->video_standard].VideoMode,
951 XC5000_Standard[priv->video_standard].AudioMode, 0);
952 if (ret != XC_RESULT_SUCCESS) {
953 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
954 return -EREMOTEIO;
955 }
956
957 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
958
959 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
960
961 if (debug)
962 xc_debug_dump(priv);
963
964 if (priv->pll_register_no != 0) {
965 msleep(20);
966 xc5000_readreg(priv, priv->pll_register_no, &pll_lock_status);
967 if (pll_lock_status > 63) {
968 /* PLL is unlocked, force reload of the firmware */
969 dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n",
970 pll_lock_status);
971 if (xc_load_fw_and_init_tuner(fe, 1) != XC_RESULT_SUCCESS) {
972 printk(KERN_ERR "xc5000: Unable to reload fw\n");
973 return -EREMOTEIO;
974 }
975 goto tune_channel;
976 }
977 }
978
979 return 0;
980 }
981
982 static int xc5000_set_radio_freq(struct dvb_frontend *fe,
983 struct analog_parameters *params)
984 {
985 struct xc5000_priv *priv = fe->tuner_priv;
986 int ret = -EINVAL;
987 u8 radio_input;
988
989 dprintk(1, "%s() frequency=%d (in units of khz)\n",
990 __func__, params->frequency);
991
992 if (priv->radio_input == XC5000_RADIO_NOT_CONFIGURED) {
993 dprintk(1, "%s() radio input not configured\n", __func__);
994 return -EINVAL;
995 }
996
997 if (priv->radio_input == XC5000_RADIO_FM1)
998 radio_input = FM_Radio_INPUT1;
999 else if (priv->radio_input == XC5000_RADIO_FM2)
1000 radio_input = FM_Radio_INPUT2;
1001 else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
1002 radio_input = FM_Radio_INPUT1_MONO;
1003 else {
1004 dprintk(1, "%s() unknown radio input %d\n", __func__,
1005 priv->radio_input);
1006 return -EINVAL;
1007 }
1008
1009 priv->freq_hz = params->frequency * 125 / 2;
1010
1011 priv->rf_mode = XC_RF_MODE_AIR;
1012
1013 ret = xc_SetTVStandard(priv, XC5000_Standard[radio_input].VideoMode,
1014 XC5000_Standard[radio_input].AudioMode, radio_input);
1015
1016 if (ret != XC_RESULT_SUCCESS) {
1017 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
1018 return -EREMOTEIO;
1019 }
1020
1021 ret = xc_SetSignalSource(priv, priv->rf_mode);
1022 if (ret != XC_RESULT_SUCCESS) {
1023 printk(KERN_ERR
1024 "xc5000: xc_SetSignalSource(%d) failed\n",
1025 priv->rf_mode);
1026 return -EREMOTEIO;
1027 }
1028
1029 if ((priv->radio_input == XC5000_RADIO_FM1) ||
1030 (priv->radio_input == XC5000_RADIO_FM2))
1031 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
1032 else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
1033 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x06);
1034
1035 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
1036
1037 return 0;
1038 }
1039
1040 static int xc5000_set_analog_params(struct dvb_frontend *fe,
1041 struct analog_parameters *params)
1042 {
1043 struct xc5000_priv *priv = fe->tuner_priv;
1044 int ret = -EINVAL;
1045
1046 if (priv->i2c_props.adap == NULL)
1047 return -EINVAL;
1048
1049 if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
1050 dprintk(1, "Unable to load firmware and init tuner\n");
1051 return -EINVAL;
1052 }
1053
1054 switch (params->mode) {
1055 case V4L2_TUNER_RADIO:
1056 ret = xc5000_set_radio_freq(fe, params);
1057 break;
1058 case V4L2_TUNER_ANALOG_TV:
1059 case V4L2_TUNER_DIGITAL_TV:
1060 ret = xc5000_set_tv_freq(fe, params);
1061 break;
1062 }
1063
1064 return ret;
1065 }
1066
1067
1068 static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
1069 {
1070 struct xc5000_priv *priv = fe->tuner_priv;
1071 dprintk(1, "%s()\n", __func__);
1072 *freq = priv->freq_hz + priv->freq_offset;
1073 return 0;
1074 }
1075
1076 static int xc5000_get_if_frequency(struct dvb_frontend *fe, u32 *freq)
1077 {
1078 struct xc5000_priv *priv = fe->tuner_priv;
1079 dprintk(1, "%s()\n", __func__);
1080 *freq = priv->if_khz * 1000;
1081 return 0;
1082 }
1083
1084 static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
1085 {
1086 struct xc5000_priv *priv = fe->tuner_priv;
1087 dprintk(1, "%s()\n", __func__);
1088
1089 *bw = priv->bandwidth;
1090 return 0;
1091 }
1092
1093 static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
1094 {
1095 struct xc5000_priv *priv = fe->tuner_priv;
1096 u16 lock_status = 0;
1097
1098 xc_get_lock_status(priv, &lock_status);
1099
1100 dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
1101
1102 *status = lock_status;
1103
1104 return 0;
1105 }
1106
1107 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force)
1108 {
1109 struct xc5000_priv *priv = fe->tuner_priv;
1110 int ret = XC_RESULT_SUCCESS;
1111 u16 pll_lock_status;
1112 u16 fw_ck;
1113
1114 if (force || xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
1115
1116 fw_retry:
1117
1118 ret = xc5000_fwupload(fe);
1119 if (ret != XC_RESULT_SUCCESS)
1120 return ret;
1121
1122 msleep(20);
1123
1124 if (priv->fw_checksum_supported) {
1125 if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck)
1126 != XC_RESULT_SUCCESS) {
1127 dprintk(1, "%s() FW checksum reading failed.\n",
1128 __func__);
1129 goto fw_retry;
1130 }
1131
1132 if (fw_ck == 0) {
1133 dprintk(1, "%s() FW checksum failed = 0x%04x\n",
1134 __func__, fw_ck);
1135 goto fw_retry;
1136 }
1137 }
1138
1139 /* Start the tuner self-calibration process */
1140 ret |= xc_initialize(priv);
1141
1142 if (ret != XC_RESULT_SUCCESS)
1143 goto fw_retry;
1144
1145 /* Wait for calibration to complete.
1146 * We could continue but XC5000 will clock stretch subsequent
1147 * I2C transactions until calibration is complete. This way we
1148 * don't have to rely on clock stretching working.
1149 */
1150 xc_wait(100);
1151
1152 if (priv->init_status_supported) {
1153 if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != XC_RESULT_SUCCESS) {
1154 dprintk(1, "%s() FW failed reading init status.\n",
1155 __func__);
1156 goto fw_retry;
1157 }
1158
1159 if (fw_ck == 0) {
1160 dprintk(1, "%s() FW init status failed = 0x%04x\n", __func__, fw_ck);
1161 goto fw_retry;
1162 }
1163 }
1164
1165 if (priv->pll_register_no) {
1166 xc5000_readreg(priv, priv->pll_register_no,
1167 &pll_lock_status);
1168 if (pll_lock_status > 63) {
1169 /* PLL is unlocked, force reload of the firmware */
1170 printk(KERN_ERR "xc5000: PLL not running after fwload.\n");
1171 goto fw_retry;
1172 }
1173 }
1174
1175 /* Default to "CABLE" mode */
1176 ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
1177 }
1178
1179 return ret;
1180 }
1181
1182 static int xc5000_sleep(struct dvb_frontend *fe)
1183 {
1184 int ret;
1185
1186 dprintk(1, "%s()\n", __func__);
1187
1188 /* Avoid firmware reload on slow devices */
1189 if (no_poweroff)
1190 return 0;
1191
1192 /* According to Xceive technical support, the "powerdown" register
1193 was removed in newer versions of the firmware. The "supported"
1194 way to sleep the tuner is to pull the reset pin low for 10ms */
1195 ret = xc5000_TunerReset(fe);
1196 if (ret != XC_RESULT_SUCCESS) {
1197 printk(KERN_ERR
1198 "xc5000: %s() unable to shutdown tuner\n",
1199 __func__);
1200 return -EREMOTEIO;
1201 } else
1202 return XC_RESULT_SUCCESS;
1203 }
1204
1205 static int xc5000_init(struct dvb_frontend *fe)
1206 {
1207 struct xc5000_priv *priv = fe->tuner_priv;
1208 dprintk(1, "%s()\n", __func__);
1209
1210 if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) {
1211 printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
1212 return -EREMOTEIO;
1213 }
1214
1215 if (debug)
1216 xc_debug_dump(priv);
1217
1218 return 0;
1219 }
1220
1221 static int xc5000_release(struct dvb_frontend *fe)
1222 {
1223 struct xc5000_priv *priv = fe->tuner_priv;
1224
1225 dprintk(1, "%s()\n", __func__);
1226
1227 mutex_lock(&xc5000_list_mutex);
1228
1229 if (priv)
1230 hybrid_tuner_release_state(priv);
1231
1232 mutex_unlock(&xc5000_list_mutex);
1233
1234 fe->tuner_priv = NULL;
1235
1236 return 0;
1237 }
1238
1239 static int xc5000_set_config(struct dvb_frontend *fe, void *priv_cfg)
1240 {
1241 struct xc5000_priv *priv = fe->tuner_priv;
1242 struct xc5000_config *p = priv_cfg;
1243
1244 dprintk(1, "%s()\n", __func__);
1245
1246 if (p->if_khz)
1247 priv->if_khz = p->if_khz;
1248
1249 if (p->radio_input)
1250 priv->radio_input = p->radio_input;
1251
1252 return 0;
1253 }
1254
1255
1256 static const struct dvb_tuner_ops xc5000_tuner_ops = {
1257 .info = {
1258 .name = "Xceive XC5000",
1259 .frequency_min = 1000000,
1260 .frequency_max = 1023000000,
1261 .frequency_step = 50000,
1262 },
1263
1264 .release = xc5000_release,
1265 .init = xc5000_init,
1266 .sleep = xc5000_sleep,
1267
1268 .set_config = xc5000_set_config,
1269 .set_params = xc5000_set_params,
1270 .set_analog_params = xc5000_set_analog_params,
1271 .get_frequency = xc5000_get_frequency,
1272 .get_if_frequency = xc5000_get_if_frequency,
1273 .get_bandwidth = xc5000_get_bandwidth,
1274 .get_status = xc5000_get_status
1275 };
1276
1277 struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
1278 struct i2c_adapter *i2c,
1279 const struct xc5000_config *cfg)
1280 {
1281 struct xc5000_priv *priv = NULL;
1282 int instance;
1283 u16 id = 0;
1284
1285 dprintk(1, "%s(%d-%04x)\n", __func__,
1286 i2c ? i2c_adapter_id(i2c) : -1,
1287 cfg ? cfg->i2c_address : -1);
1288
1289 mutex_lock(&xc5000_list_mutex);
1290
1291 instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
1292 hybrid_tuner_instance_list,
1293 i2c, cfg->i2c_address, "xc5000");
1294 switch (instance) {
1295 case 0:
1296 goto fail;
1297 break;
1298 case 1:
1299 /* new tuner instance */
1300 priv->bandwidth = 6000000;
1301 fe->tuner_priv = priv;
1302 break;
1303 default:
1304 /* existing tuner instance */
1305 fe->tuner_priv = priv;
1306 break;
1307 }
1308
1309 if (priv->if_khz == 0) {
1310 /* If the IF hasn't been set yet, use the value provided by
1311 the caller (occurs in hybrid devices where the analog
1312 call to xc5000_attach occurs before the digital side) */
1313 priv->if_khz = cfg->if_khz;
1314 }
1315
1316 if (priv->xtal_khz == 0)
1317 priv->xtal_khz = cfg->xtal_khz;
1318
1319 if (priv->radio_input == 0)
1320 priv->radio_input = cfg->radio_input;
1321
1322 /* don't override chip id if it's already been set
1323 unless explicitly specified */
1324 if ((priv->chip_id == 0) || (cfg->chip_id))
1325 /* use default chip id if none specified, set to 0 so
1326 it can be overridden if this is a hybrid driver */
1327 priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0;
1328
1329 /* Check if firmware has been loaded. It is possible that another
1330 instance of the driver has loaded the firmware.
1331 */
1332 if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS)
1333 goto fail;
1334
1335 switch (id) {
1336 case XC_PRODUCT_ID_FW_LOADED:
1337 printk(KERN_INFO
1338 "xc5000: Successfully identified at address 0x%02x\n",
1339 cfg->i2c_address);
1340 printk(KERN_INFO
1341 "xc5000: Firmware has been loaded previously\n");
1342 break;
1343 case XC_PRODUCT_ID_FW_NOT_LOADED:
1344 printk(KERN_INFO
1345 "xc5000: Successfully identified at address 0x%02x\n",
1346 cfg->i2c_address);
1347 printk(KERN_INFO
1348 "xc5000: Firmware has not been loaded previously\n");
1349 break;
1350 default:
1351 printk(KERN_ERR
1352 "xc5000: Device not found at addr 0x%02x (0x%x)\n",
1353 cfg->i2c_address, id);
1354 goto fail;
1355 }
1356
1357 mutex_unlock(&xc5000_list_mutex);
1358
1359 memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
1360 sizeof(struct dvb_tuner_ops));
1361
1362 return fe;
1363 fail:
1364 mutex_unlock(&xc5000_list_mutex);
1365
1366 xc5000_release(fe);
1367 return NULL;
1368 }
1369 EXPORT_SYMBOL(xc5000_attach);
1370
1371 MODULE_AUTHOR("Steven Toth");
1372 MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
1373 MODULE_LICENSE("GPL");
1374 MODULE_FIRMWARE(XC5000A_FIRMWARE);
1375 MODULE_FIRMWARE(XC5000C_FIRMWARE);
kernel source for telekom puls (alcatel/mediatek)