drivers/media/rc/Kconfig

   1 config RC_CORE
   2         tristate
   3         depends on MEDIA_RC_SUPPORT
   4         depends on INPUT
   5         default y
   6
   7 source "drivers/media/rc/keymaps/Kconfig"
   8
   9 menuconfig RC_DECODERS
  10         bool "Remote controller decoders"
  11         depends on RC_CORE
  12         default y
  13
  14 if RC_DECODERS
  15 config LIRC
  16         tristate "LIRC interface driver"
  17         depends on RC_CORE
  18
  19         ---help---
  20            Enable this option to build the Linux Infrared Remote
  21            Control (LIRC) core device interface driver. The LIRC
  22            interface passes raw IR to and from userspace, where the
  23            LIRC daemon handles protocol decoding for IR reception and
  24            encoding for IR transmitting (aka "blasting").
  25
  26 config IR_LIRC_CODEC
  27         tristate "Enable IR to LIRC bridge"
  28         depends on RC_CORE
  29         depends on LIRC
  30         default y
  31
  32         ---help---
  33            Enable this option to pass raw IR to and from userspace via
  34            the LIRC interface.
  35
  36
  37 config IR_NEC_DECODER
  38         tristate "Enable IR raw decoder for the NEC protocol"
  39         depends on RC_CORE
  40         select BITREVERSE
  41         default y
  42
  43         ---help---
  44            Enable this option if you have IR with NEC protocol, and
  45            if the IR is decoded in software
  46
  47 config IR_RC5_DECODER
  48         tristate "Enable IR raw decoder for the RC-5 protocol"
  49         depends on RC_CORE
  50         select BITREVERSE
  51         default y
  52
  53         ---help---
  54            Enable this option if you have IR with RC-5 protocol, and
  55            if the IR is decoded in software
  56
  57 config IR_RC6_DECODER
  58         tristate "Enable IR raw decoder for the RC6 protocol"
  59         depends on RC_CORE
  60         select BITREVERSE
  61         default y
  62
  63         ---help---
  64            Enable this option if you have an infrared remote control which
  65            uses the RC6 protocol, and you need software decoding support.
  66
  67 config IR_JVC_DECODER
  68         tristate "Enable IR raw decoder for the JVC protocol"
  69         depends on RC_CORE
  70         select BITREVERSE
  71         default y
  72
  73         ---help---
  74            Enable this option if you have an infrared remote control which
  75            uses the JVC protocol, and you need software decoding support.
  76
  77 config IR_SONY_DECODER
  78         tristate "Enable IR raw decoder for the Sony protocol"
  79         depends on RC_CORE
  80         select BITREVERSE
  81         default y
  82
  83         ---help---
  84            Enable this option if you have an infrared remote control which
  85            uses the Sony protocol, and you need software decoding support.
  86
  87 config IR_RC5_SZ_DECODER
  88         tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
  89         depends on RC_CORE
  90         select BITREVERSE
  91         default y
  92
  93         ---help---
  94            Enable this option if you have IR with RC-5 (streamzap) protocol,
  95            and if the IR is decoded in software. (The Streamzap PC Remote
  96            uses an IR protocol that is almost standard RC-5, but not quite,
  97            as it uses an additional bit).
  98
  99 config IR_SANYO_DECODER
 100         tristate "Enable IR raw decoder for the Sanyo protocol"
 101         depends on RC_CORE
 102         default y
 103
 104         ---help---
 105            Enable this option if you have an infrared remote control which
 106            uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
 107            and you need software decoding support.
 108
 109 config IR_MCE_KBD_DECODER
 110         tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
 111         depends on RC_CORE
 112         select BITREVERSE
 113         default y
 114
 115         ---help---
 116            Enable this option if you have a Microsoft Remote Keyboard for
 117            Windows Media Center Edition, which you would like to use with
 118            a raw IR receiver in your system.
 119 endif #RC_DECODERS
 120
 121 menuconfig RC_DEVICES
 122         bool "Remote Controller devices"
 123         depends on RC_CORE
 124
 125 if RC_DEVICES
 126
 127 config RC_ATI_REMOTE
 128         tristate "ATI / X10 based USB RF remote controls"
 129         depends on USB_ARCH_HAS_HCD
 130         depends on RC_CORE
 131         select USB
 132         help
 133            Say Y here if you want to use an X10 based USB remote control.
 134            These are RF remotes with USB receivers.
 135
 136            Such devices include the ATI remote that comes with many of ATI's
 137            All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
 138            Medion RF remote, and SnapStream FireFly remote.
 139
 140            This driver provides mouse pointer, left and right mouse buttons,
 141            and maps all the other remote buttons to keypress events.
 142
 143            To compile this driver as a module, choose M here: the module will be
 144            called ati_remote.
 145
 146 config IR_ENE
 147         tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 148         depends on PNP
 149         depends on RC_CORE
 150         ---help---
 151            Say Y here to enable support for integrated infrared receiver
 152            /transceiver made by ENE.
 153
 154            You can see if you have it by looking at lspnp output.
 155            Output should include ENE0100 ENE0200 or something similar.
 156
 157            To compile this driver as a module, choose M here: the
 158            module will be called ene_ir.
 159
 160 config IR_IMON
 161         tristate "SoundGraph iMON Receiver and Display"
 162         depends on USB_ARCH_HAS_HCD
 163         depends on RC_CORE
 164         select USB
 165         ---help---
 166            Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
 167            IR Receiver and/or LCD/VFD/VGA display.
 168
 169            To compile this driver as a module, choose M here: the
 170            module will be called imon.
 171
 172 config IR_MCEUSB
 173         tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 174         depends on USB_ARCH_HAS_HCD
 175         depends on RC_CORE
 176         select USB
 177         ---help---
 178            Say Y here if you want to use a Windows Media Center Edition
 179            eHome Infrared Transceiver.
 180
 181            To compile this driver as a module, choose M here: the
 182            module will be called mceusb.
 183
 184 config IR_ITE_CIR
 185         tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
 186         depends on PNP
 187         depends on RC_CORE
 188         ---help---
 189            Say Y here to enable support for integrated infrared receivers
 190            /transceivers made by ITE Tech Inc. These are found in
 191            several ASUS devices, like the ASUS Digimatrix or the ASUS
 192            EEEBox 1501U.
 193
 194            To compile this driver as a module, choose M here: the
 195            module will be called ite-cir.
 196
 197 config IR_FINTEK
 198         tristate "Fintek Consumer Infrared Transceiver"
 199         depends on PNP
 200         depends on RC_CORE
 201         ---help---
 202            Say Y here to enable support for integrated infrared receiver
 203            /transciever made by Fintek. This chip is found on assorted
 204            Jetway motherboards (and of course, possibly others).
 205
 206            To compile this driver as a module, choose M here: the
 207            module will be called fintek-cir.
 208
 209 config IR_NUVOTON
 210         tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 211         depends on PNP
 212         depends on RC_CORE
 213         ---help---
 214            Say Y here to enable support for integrated infrared receiver
 215            /transciever made by Nuvoton (formerly Winbond). This chip is
 216            found in the ASRock ION 330HT, as well as assorted Intel
 217            DP55-series motherboards (and of course, possibly others).
 218
 219            To compile this driver as a module, choose M here: the
 220            module will be called nuvoton-cir.
 221
 222 config IR_REDRAT3
 223         tristate "RedRat3 IR Transceiver"
 224         depends on USB_ARCH_HAS_HCD
 225         depends on RC_CORE
 226         select USB
 227         ---help---
 228            Say Y here if you want to use a RedRat3 Infrared Transceiver.
 229
 230            To compile this driver as a module, choose M here: the
 231            module will be called redrat3.
 232
 233 config IR_STREAMZAP
 234         tristate "Streamzap PC Remote IR Receiver"
 235         depends on USB_ARCH_HAS_HCD
 236         depends on RC_CORE
 237         select USB
 238         ---help---
 239            Say Y here if you want to use a Streamzap PC Remote
 240            Infrared Receiver.
 241
 242            To compile this driver as a module, choose M here: the
 243            module will be called streamzap.
 244
 245 config IR_WINBOND_CIR
 246         tristate "Winbond IR remote control"
 247         depends on X86 && PNP
 248         depends on RC_CORE
 249         select NEW_LEDS
 250         select LEDS_CLASS
 251         select LEDS_TRIGGERS
 252         select BITREVERSE
 253         ---help---
 254            Say Y here if you want to use the IR remote functionality found
 255            in some Winbond SuperI/O chips. Currently only the WPCD376I
 256            chip is supported (included in some Intel Media series
 257            motherboards).
 258
 259            To compile this driver as a module, choose M here: the module will
 260            be called winbond_cir.
 261
 262 config IR_IGUANA
 263         tristate "IguanaWorks USB IR Transceiver"
 264         depends on USB_ARCH_HAS_HCD
 265         depends on RC_CORE
 266         select USB
 267         ---help---
 268            Say Y here if you want to use the IguanaWorks USB IR Transceiver.
 269            Both infrared receive and send are supported. If you want to
 270            change the ID or the pin config, use the user space driver from
 271            IguanaWorks.
 272
 273            Only firmware 0x0205 and later is supported.
 274
 275            To compile this driver as a module, choose M here: the module will
 276            be called iguanair.
 277
 278 config IR_TTUSBIR
 279         tristate "TechnoTrend USB IR Receiver"
 280         depends on USB_ARCH_HAS_HCD
 281         depends on RC_CORE
 282         select USB
 283         select NEW_LEDS
 284         select LEDS_CLASS
 285         ---help---
 286            Say Y here if you want to use the TechnoTrend USB IR Receiver. The
 287            driver can control the led.
 288
 289            To compile this driver as a module, choose M here: the module will
 290            be called ttusbir.
 291
 292 config IR_RX51
 293         tristate "Nokia N900 IR transmitter diode"
 294         depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
 295         ---help---
 296            Say Y or M here if you want to enable support for the IR
 297            transmitter diode built in the Nokia N900 (RX51) device.
 298
 299            The driver uses omap DM timers for generating the carrier
 300            wave and pulses.
 301
 302 config RC_LOOPBACK
 303         tristate "Remote Control Loopback Driver"
 304         depends on RC_CORE
 305         ---help---
 306            Say Y here if you want support for the remote control loopback
 307            driver which allows TX data to be sent back as RX data.
 308            This is mostly useful for debugging purposes.
 309
 310            If you're not sure, select N here.
 311
 312            To compile this driver as a module, choose M here: the module will
 313            be called rc_loopback.
 314
 315 config IR_GPIO_CIR
 316         tristate "GPIO IR remote control"
 317         depends on RC_CORE
 318         ---help---
 319            Say Y if you want to use GPIO based IR Receiver.
 320
 321            To compile this driver as a module, choose M here: the module will
 322            be called gpio-ir-recv.
 323
 324 endif #RC_DEVICES