drivers/macintosh/Kconfig

   1
   2 menuconfig MACINTOSH_DRIVERS
   3         bool "Macintosh device drivers"
   4         depends on PPC || MAC || X86
   5         default y if (PPC_PMAC || MAC)
   6         ---help---
   7           Say Y here to get to see options for devices used with Macintosh
   8           computers. This option alone does not add any kernel code.
   9
  10           If you say N, all options in this submenu will be skipped and disabled.
  11
  12 if MACINTOSH_DRIVERS
  13
  14 config ADB
  15         bool "Apple Desktop Bus (ADB) support"
  16         depends on MAC || (PPC_PMAC && PPC32)
  17         help
  18           Apple Desktop Bus (ADB) support is for support of devices which
  19           are connected to an ADB port.  ADB devices tend to have 4 pins.
  20           If you have an Apple Macintosh prior to the iMac, an iBook or
  21           PowerBook, or a "Blue and White G3", you probably want to say Y
  22           here.  Otherwise say N.
  23
  24 config ADB_MACII
  25         bool "Include Mac II ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  30           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  31           Centris 650.
  32
  33 config ADB_MACIISI
  34         bool "Include Mac IIsi ADB driver"
  35         depends on ADB && MAC
  36         help
  37           Say Y here if want your kernel to support Macintosh systems that use
  38           the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
  39           II, LC, LC II, LC III, Performa 460, and the Performa 600.
  40
  41 config ADB_IOP
  42         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  43         depends on ADB && MAC
  44         help
  45           The I/O Processor (IOP) is an Apple custom IC designed to provide
  46           intelligent support for I/O controllers.  It is described at
  47           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  48           support for it, say 'Y' here.
  49
  50 config ADB_PMU68K
  51         bool "Include PMU (Powerbook) ADB driver"
  52         depends on ADB && MAC
  53         help
  54           Say Y here if want your kernel to support the m68k based Powerbooks.
  55           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  56           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  57           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  58           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  59           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  60
  61 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  62 config ADB_CUDA
  63         bool "Support for CUDA based Macs and PowerMacs"
  64         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  65         help
  66           This provides support for CUDA based Macintosh and Power Macintosh
  67           systems.  This includes many m68k based Macs (Color Classic, Mac TV,
  68           Performa 475, Performa 520, Performa 550, Performa 575,
  69           Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
  70           Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
  71           the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
  72           models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
  73           even if your machine doesn't have a CUDA.
  74
  75           If unsure say Y.
  76
  77 config ADB_PMU
  78         bool "Support for PMU  based PowerMacs"
  79         depends on PPC_PMAC
  80         help
  81           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  82           PMU is an embedded microprocessor whose primary function is to
  83           control system power, and battery charging on the portable models.
  84           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  85           the keyboard and mouse on some machines, as well as the non-volatile
  86           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  87           this device; you should do so if your machine is one of those
  88           mentioned above.
  89
  90 config ADB_PMU_LED
  91         bool "Support for the Power/iBook front LED"
  92         depends on ADB_PMU
  93         select NEW_LEDS
  94         select LEDS_CLASS
  95         help
  96           Support the front LED on Power/iBooks as a generic LED that can
  97           be triggered by any of the supported triggers. To get the
  98           behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
  99           and the ide-disk LED trigger and configure appropriately through
 100           sysfs.
 101
 102 config ADB_PMU_LED_IDE
 103         bool "Use front LED as IDE LED by default"
 104         depends on ADB_PMU_LED
 105         depends on LEDS_CLASS
 106         select LEDS_TRIGGERS
 107         select LEDS_TRIGGER_IDE_DISK
 108         help
 109           This option makes the front LED default to the IDE trigger
 110           so that it blinks on IDE activity.
 111
 112 config PMAC_SMU
 113         bool "Support for SMU  based PowerMacs"
 114         depends on PPC_PMAC64
 115         help
 116           This option adds support for the newer G5 iMacs and PowerMacs based
 117           on the "SMU" system control chip which replaces the old PMU.
 118           If you don't know, say Y.
 119
 120 config PMAC_APM_EMU
 121         tristate "APM emulation"
 122         select APM_EMULATION
 123         depends on ADB_PMU && PM && PPC32
 124
 125 config PMAC_MEDIABAY
 126         bool "Support PowerBook hotswap media bay"
 127         depends on PPC_PMAC && PPC32 && BLOCK
 128         help
 129           This option adds support for older PowerBook's hotswap media bay
 130           that can contains batteries, floppy drives, or IDE devices. PCI
 131           devices are not fully supported in the bay as I never had one to
 132           try with
 133
 134 config PMAC_BACKLIGHT
 135         bool "Backlight control for LCD screens"
 136         depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
 137         select FB_BACKLIGHT
 138         help
 139           Say Y here to enable Macintosh specific extensions of the generic
 140           backlight code. With this enabled, the brightness keys on older
 141           PowerBooks will be enabled so you can change the screen brightness.
 142           Newer models should use a userspace daemon like pbbuttonsd.
 143
 144 config PMAC_BACKLIGHT_LEGACY
 145         bool "Provide legacy ioctl's on /dev/pmu for the backlight"
 146         depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
 147         help
 148           Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
 149           programs which use this old interface. New and updated programs
 150           should use the backlight classes in sysfs.
 151
 152 config ADB_MACIO
 153         bool "Include MacIO (CHRP) ADB driver"
 154         depends on ADB && PPC_CHRP && !PPC_PMAC64
 155         help
 156           Say Y here to include direct support for the ADB controller in the
 157           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 158           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 159           OpenPIC controller and two RS422/Geoports.)
 160
 161 config INPUT_ADBHID
 162         bool "Support for ADB input devices (keyboard, mice, ...)"
 163         depends on ADB && INPUT=y
 164         help
 165           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 166           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 167           handled by the input layer.  If you say Y here, make sure to say Y to
 168           the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
 169           "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
 170           support" (CONFIG_INPUT_EVDEV) as well.
 171
 172           If unsure, say Y.
 173
 174 config MAC_EMUMOUSEBTN
 175         tristate "Support for mouse button 2+3 emulation"
 176         depends on SYSCTL && INPUT
 177         help
 178           This provides generic support for emulating the 2nd and 3rd mouse
 179           button with keypresses.  If you say Y here, the emulation is still
 180           disabled by default.  The emulation is controlled by these sysctl
 181           entries:
 182           /proc/sys/dev/mac_hid/mouse_button_emulation
 183           /proc/sys/dev/mac_hid/mouse_button2_keycode
 184           /proc/sys/dev/mac_hid/mouse_button3_keycode
 185
 186           If you have an Apple machine with a 1-button mouse, say Y here.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called mac_hid.
 190
 191 config THERM_WINDTUNNEL
 192         tristate "Support for thermal management on Windtunnel G4s"
 193         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 194         help
 195           This driver provides some thermostat and fan control for the desktop
 196           G4 "Windtunnel"
 197
 198 config THERM_ADT746X
 199         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 200         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 201         help
 202           This driver provides some thermostat and fan control for the
 203           iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
 204           better fan behaviour by default, and some manual control.
 205
 206 config THERM_PM72
 207         tristate "Support for thermal management on PowerMac G5 (AGP)"
 208         depends on I2C && I2C_POWERMAC && PPC_PMAC64
 209         default n
 210         help
 211           This driver provides thermostat and fan control for the desktop
 212           G5 machines.
 213
 214           This is deprecated, use windfarm instead.
 215
 216 config WINDFARM
 217         tristate "New PowerMac thermal control infrastructure"
 218         depends on PPC
 219
 220 config WINDFARM_PM81
 221         tristate "Support for thermal management on iMac G5"
 222         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 223         select I2C_POWERMAC
 224         help
 225           This driver provides thermal control for the iMacG5
 226
 227 config WINDFARM_PM72
 228         tristate "Support for thermal management on PowerMac G5 (AGP)"
 229         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 230         select I2C_POWERMAC
 231         help
 232           This driver provides thermal control for the PowerMac G5
 233           "AGP" variants (PowerMac 7,2 and 7,3)
 234
 235 config WINDFARM_RM31
 236         tristate "Support for thermal management on Xserve G5"
 237         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 238         select I2C_POWERMAC
 239         help
 240           This driver provides thermal control for the Xserve G5
 241           (RackMac3,1)
 242
 243 config WINDFARM_PM91
 244         tristate "Support for thermal management on PowerMac9,1"
 245         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 246         select I2C_POWERMAC
 247         help
 248           This driver provides thermal control for the PowerMac9,1
 249           which is the recent (SMU based) single CPU desktop G5
 250
 251 config WINDFARM_PM112
 252         tristate "Support for thermal management on PowerMac11,2"
 253         depends on WINDFARM && I2C && PMAC_SMU
 254         select I2C_POWERMAC
 255         help
 256           This driver provides thermal control for the PowerMac11,2
 257           which are the recent dual and quad G5 machines using the
 258           970MP dual-core processor.
 259
 260 config WINDFARM_PM121
 261         tristate "Support for thermal management on PowerMac12,1"
 262         depends on WINDFARM && I2C && PMAC_SMU
 263         select I2C_POWERMAC
 264         help
 265           This driver provides thermal control for the PowerMac12,1
 266           which is the iMac G5 (iSight).
 267
 268 config ANSLCD
 269         tristate "Support for ANS LCD display"
 270         depends on ADB_CUDA && PPC_PMAC
 271
 272 config PMAC_RACKMETER
 273         tristate "Support for Apple XServe front panel LEDs"
 274         depends on PPC_PMAC
 275         help
 276           This driver provides some support to control the front panel
 277           blue LEDs "vu-meter" of the XServer macs.
 278
 279 config SENSORS_AMS
 280         tristate "Apple Motion Sensor driver"
 281         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
 282         select INPUT_POLLDEV
 283         help
 284           Support for the motion sensor included in PowerBooks. Includes
 285           implementations for PMU and I2C.
 286
 287           This driver can also be built as a module. If so, the module
 288           will be called ams.
 289
 290 config SENSORS_AMS_PMU
 291         bool "PMU variant"
 292         depends on SENSORS_AMS && ADB_PMU
 293         default y
 294         help
 295           PMU variant of motion sensor, found in late 2005 PowerBooks.
 296
 297 config SENSORS_AMS_I2C
 298         bool "I2C variant"
 299         depends on SENSORS_AMS && I2C
 300         default y
 301         help
 302           I2C variant of motion sensor, found in early 2005 PowerBooks and
 303           iBooks.
 304
 305 endif # MACINTOSH_DRIVERS