drivers/input/keyboard/mpr121_touchkey.c

   1 /*
   2  * Touchkey driver for Freescale MPR121 Controllor
   3  *
   4  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   5  * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
   6  *
   7  * Based on mcs_touchkey.c
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #include <linux/module.h>
  16 #include <linux/init.h>
  17 #include <linux/input.h>
  18 #include <linux/i2c.h>
  19 #include <linux/slab.h>
  20 #include <linux/delay.h>
  21 #include <linux/bitops.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/i2c/mpr121_touchkey.h>
  24
  25 /* Register definitions */
  26 #define ELE_TOUCH_STATUS_0_ADDR 0x0
  27 #define ELE_TOUCH_STATUS_1_ADDR 0X1
  28 #define MHD_RISING_ADDR         0x2b
  29 #define NHD_RISING_ADDR         0x2c
  30 #define NCL_RISING_ADDR         0x2d
  31 #define FDL_RISING_ADDR         0x2e
  32 #define MHD_FALLING_ADDR        0x2f
  33 #define NHD_FALLING_ADDR        0x30
  34 #define NCL_FALLING_ADDR        0x31
  35 #define FDL_FALLING_ADDR        0x32
  36 #define ELE0_TOUCH_THRESHOLD_ADDR       0x41
  37 #define ELE0_RELEASE_THRESHOLD_ADDR     0x42
  38 #define AFE_CONF_ADDR                   0x5c
  39 #define FILTER_CONF_ADDR                0x5d
  40
  41 /*
  42  * ELECTRODE_CONF_ADDR: This register configures the number of
  43  * enabled capacitance sensing inputs and its run/suspend mode.
  44  */
  45 #define ELECTRODE_CONF_ADDR             0x5e
  46 #define ELECTRODE_CONF_QUICK_CHARGE     0x80
  47 #define AUTO_CONFIG_CTRL_ADDR           0x7b
  48 #define AUTO_CONFIG_USL_ADDR            0x7d
  49 #define AUTO_CONFIG_LSL_ADDR            0x7e
  50 #define AUTO_CONFIG_TL_ADDR             0x7f
  51
  52 /* Threshold of touch/release trigger */
  53 #define TOUCH_THRESHOLD                 0x08
  54 #define RELEASE_THRESHOLD               0x05
  55 /* Masks for touch and release triggers */
  56 #define TOUCH_STATUS_MASK               0xfff
  57 /* MPR121 has 12 keys */
  58 #define MPR121_MAX_KEY_COUNT            12
  59
  60 struct mpr121_touchkey {
  61         struct i2c_client       *client;
  62         struct input_dev        *input_dev;
  63         unsigned int            key_val;
  64         unsigned int            statusbits;
  65         unsigned int            keycount;
  66         u16                     keycodes[MPR121_MAX_KEY_COUNT];
  67 };
  68
  69 struct mpr121_init_register {
  70         int addr;
  71         u8 val;
  72 };
  73
  74 static const struct mpr121_init_register init_reg_table[] = {
  75         { MHD_RISING_ADDR,      0x1 },
  76         { NHD_RISING_ADDR,      0x1 },
  77         { MHD_FALLING_ADDR,     0x1 },
  78         { NHD_FALLING_ADDR,     0x1 },
  79         { NCL_FALLING_ADDR,     0xff },
  80         { FDL_FALLING_ADDR,     0x02 },
  81         { FILTER_CONF_ADDR,     0x04 },
  82         { AFE_CONF_ADDR,        0x0b },
  83         { AUTO_CONFIG_CTRL_ADDR, 0x0b },
  84 };
  85
  86 static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
  87 {
  88         struct mpr121_touchkey *mpr121 = dev_id;
  89         struct i2c_client *client = mpr121->client;
  90         struct input_dev *input = mpr121->input_dev;
  91         unsigned int key_num, key_val, pressed;
  92         int reg;
  93
  94         reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
  95         if (reg < 0) {
  96                 dev_err(&client->dev, "i2c read error [%d]\n", reg);
  97                 goto out;
  98         }
  99
 100         reg <<= 8;
 101         reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
 102         if (reg < 0) {
 103                 dev_err(&client->dev, "i2c read error [%d]\n", reg);
 104                 goto out;
 105         }
 106
 107         reg &= TOUCH_STATUS_MASK;
 108         /* use old press bit to figure out which bit changed */
 109         key_num = ffs(reg ^ mpr121->statusbits) - 1;
 110         pressed = reg & (1 << key_num);
 111         mpr121->statusbits = reg;
 112
 113         key_val = mpr121->keycodes[key_num];
 114
 115         input_event(input, EV_MSC, MSC_SCAN, key_num);
 116         input_report_key(input, key_val, pressed);
 117         input_sync(input);
 118
 119         dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
 120                 pressed ? "pressed" : "released");
 121
 122 out:
 123         return IRQ_HANDLED;
 124 }
 125
 126 static int mpr121_phys_init(const struct mpr121_platform_data *pdata,
 127                                       struct mpr121_touchkey *mpr121,
 128                                       struct i2c_client *client)
 129 {
 130         const struct mpr121_init_register *reg;
 131         unsigned char usl, lsl, tl, eleconf;
 132         int i, t, vdd, ret;
 133
 134         /* Set up touch/release threshold for ele0-ele11 */
 135         for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
 136                 t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
 137                 ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
 138                 if (ret < 0)
 139                         goto err_i2c_write;
 140                 ret = i2c_smbus_write_byte_data(client, t + 1,
 141                                                 RELEASE_THRESHOLD);
 142                 if (ret < 0)
 143                         goto err_i2c_write;
 144         }
 145
 146         /* Set up init register */
 147         for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
 148                 reg = &init_reg_table[i];
 149                 ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
 150                 if (ret < 0)
 151                         goto err_i2c_write;
 152         }
 153
 154
 155         /*
 156          * Capacitance on sensing input varies and needs to be compensated.
 157          * The internal MPR121-auto-configuration can do this if it's
 158          * registers are set properly (based on pdata->vdd_uv).
 159          */
 160         vdd = pdata->vdd_uv / 1000;
 161         usl = ((vdd - 700) * 256) / vdd;
 162         lsl = (usl * 65) / 100;
 163         tl = (usl * 90) / 100;
 164         ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
 165         ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
 166         ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
 167
 168         /*
 169          * Quick charge bit will let the capacitive charge to ready
 170          * state quickly, or the buttons may not function after system
 171          * boot.
 172          */
 173         eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
 174         ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
 175                                          eleconf);
 176         if (ret != 0)
 177                 goto err_i2c_write;
 178
 179         dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount);
 180
 181         return 0;
 182
 183 err_i2c_write:
 184         dev_err(&client->dev, "i2c write error: %d\n", ret);
 185         return ret;
 186 }
 187
 188 static int mpr_touchkey_probe(struct i2c_client *client,
 189                               const struct i2c_device_id *id)
 190 {
 191         const struct mpr121_platform_data *pdata = client->dev.platform_data;
 192         struct mpr121_touchkey *mpr121;
 193         struct input_dev *input_dev;
 194         int error;
 195         int i;
 196
 197         if (!pdata) {
 198                 dev_err(&client->dev, "no platform data defined\n");
 199                 return -EINVAL;
 200         }
 201
 202         if (!pdata->keymap || !pdata->keymap_size) {
 203                 dev_err(&client->dev, "missing keymap data\n");
 204                 return -EINVAL;
 205         }
 206
 207         if (pdata->keymap_size > MPR121_MAX_KEY_COUNT) {
 208                 dev_err(&client->dev, "too many keys defined\n");
 209                 return -EINVAL;
 210         }
 211
 212         if (!client->irq) {
 213                 dev_err(&client->dev, "irq number should not be zero\n");
 214                 return -EINVAL;
 215         }
 216
 217         mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
 218         input_dev = input_allocate_device();
 219         if (!mpr121 || !input_dev) {
 220                 dev_err(&client->dev, "Failed to allocate memory\n");
 221                 error = -ENOMEM;
 222                 goto err_free_mem;
 223         }
 224
 225         mpr121->client = client;
 226         mpr121->input_dev = input_dev;
 227         mpr121->keycount = pdata->keymap_size;
 228
 229         input_dev->name = "Freescale MPR121 Touchkey";
 230         input_dev->id.bustype = BUS_I2C;
 231         input_dev->dev.parent = &client->dev;
 232         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 233
 234         input_dev->keycode = mpr121->keycodes;
 235         input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
 236         input_dev->keycodemax = mpr121->keycount;
 237
 238         for (i = 0; i < pdata->keymap_size; i++) {
 239                 input_set_capability(input_dev, EV_KEY, pdata->keymap[i]);
 240                 mpr121->keycodes[i] = pdata->keymap[i];
 241         }
 242
 243         error = mpr121_phys_init(pdata, mpr121, client);
 244         if (error) {
 245                 dev_err(&client->dev, "Failed to init register\n");
 246                 goto err_free_mem;
 247         }
 248
 249         error = request_threaded_irq(client->irq, NULL,
 250                                      mpr_touchkey_interrupt,
 251                                      IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 252                                      client->dev.driver->name, mpr121);
 253         if (error) {
 254                 dev_err(&client->dev, "Failed to register interrupt\n");
 255                 goto err_free_mem;
 256         }
 257
 258         error = input_register_device(input_dev);
 259         if (error)
 260                 goto err_free_irq;
 261
 262         i2c_set_clientdata(client, mpr121);
 263         device_init_wakeup(&client->dev, pdata->wakeup);
 264
 265         return 0;
 266
 267 err_free_irq:
 268         free_irq(client->irq, mpr121);
 269 err_free_mem:
 270         input_free_device(input_dev);
 271         kfree(mpr121);
 272         return error;
 273 }
 274
 275 static int mpr_touchkey_remove(struct i2c_client *client)
 276 {
 277         struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
 278
 279         free_irq(client->irq, mpr121);
 280         input_unregister_device(mpr121->input_dev);
 281         kfree(mpr121);
 282
 283         return 0;
 284 }
 285
 286 #ifdef CONFIG_PM_SLEEP
 287 static int mpr_suspend(struct device *dev)
 288 {
 289         struct i2c_client *client = to_i2c_client(dev);
 290
 291         if (device_may_wakeup(&client->dev))
 292                 enable_irq_wake(client->irq);
 293
 294         i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
 295
 296         return 0;
 297 }
 298
 299 static int mpr_resume(struct device *dev)
 300 {
 301         struct i2c_client *client = to_i2c_client(dev);
 302         struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
 303
 304         if (device_may_wakeup(&client->dev))
 305                 disable_irq_wake(client->irq);
 306
 307         i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
 308                                   mpr121->keycount);
 309
 310         return 0;
 311 }
 312 #endif
 313
 314 static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
 315
 316 static const struct i2c_device_id mpr121_id[] = {
 317         { "mpr121_touchkey", 0 },
 318         { }
 319 };
 320 MODULE_DEVICE_TABLE(i2c, mpr121_id);
 321
 322 static struct i2c_driver mpr_touchkey_driver = {
 323         .driver = {
 324                 .name   = "mpr121",
 325                 .owner  = THIS_MODULE,
 326                 .pm     = &mpr121_touchkey_pm_ops,
 327         },
 328         .id_table       = mpr121_id,
 329         .probe          = mpr_touchkey_probe,
 330         .remove         = mpr_touchkey_remove,
 331 };
 332
 333 module_i2c_driver(mpr_touchkey_driver);
 334
 335 MODULE_LICENSE("GPL");
 336 MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
 337 MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");