projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
md/bitmap: disable bitmap_resize for file-backed bitmaps.
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / gpio / gpio-omap.c
1 /*
2 * Support functions for OMAP GPIO
3 *
4 * Copyright (C) 2003-2005 Nokia Corporation
5 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
6 *
7 * Copyright (C) 2009 Texas Instruments
8 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/interrupt.h>
18 #include <linux/syscore_ops.h>
19 #include <linux/err.h>
20 #include <linux/clk.h>
21 #include <linux/io.h>
22 #include <linux/device.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/pm.h>
25 #include <linux/of.h>
26 #include <linux/of_device.h>
27 #include <linux/irqdomain.h>
28 #include <linux/irqchip/chained_irq.h>
29 #include <linux/gpio.h>
30 #include <linux/platform_data/gpio-omap.h>
31
32 #define OFF_MODE 1
33
34 static LIST_HEAD(omap_gpio_list);
35
36 struct gpio_regs {
37 u32 irqenable1;
38 u32 irqenable2;
39 u32 wake_en;
40 u32 ctrl;
41 u32 oe;
42 u32 leveldetect0;
43 u32 leveldetect1;
44 u32 risingdetect;
45 u32 fallingdetect;
46 u32 dataout;
47 u32 debounce;
48 u32 debounce_en;
49 };
50
51 struct gpio_bank {
52 struct list_head node;
53 void __iomem *base;
54 u16 irq;
55 struct irq_domain *domain;
56 u32 non_wakeup_gpios;
57 u32 enabled_non_wakeup_gpios;
58 struct gpio_regs context;
59 u32 saved_datain;
60 u32 level_mask;
61 u32 toggle_mask;
62 spinlock_t lock;
63 struct gpio_chip chip;
64 struct clk *dbck;
65 u32 mod_usage;
66 u32 irq_usage;
67 u32 dbck_enable_mask;
68 bool dbck_enabled;
69 struct device *dev;
70 bool is_mpuio;
71 bool dbck_flag;
72 bool loses_context;
73 bool context_valid;
74 int stride;
75 u32 width;
76 int context_loss_count;
77 int power_mode;
78 bool workaround_enabled;
79
80 void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
81 int (*get_context_loss_count)(struct device *dev);
82
83 struct omap_gpio_reg_offs *regs;
84 };
85
86 #define GPIO_INDEX(bank, gpio) (gpio % bank->width)
87 #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
88 #define GPIO_MOD_CTRL_BIT BIT(0)
89
90 #define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
91 #define LINE_USED(line, offset) (line & (1 << offset))
92
93 static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
94 {
95 return bank->chip.base + gpio_irq;
96 }
97
98 static int omap_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
99 {
100 struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
101
102 return irq_find_mapping(bank->domain, offset);
103 }
104
105 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
106 {
107 void __iomem *reg = bank->base;
108 u32 l;
109
110 reg += bank->regs->direction;
111 l = __raw_readl(reg);
112 if (is_input)
113 l |= 1 << gpio;
114 else
115 l &= ~(1 << gpio);
116 __raw_writel(l, reg);
117 bank->context.oe = l;
118 }
119
120
121 /* set data out value using dedicate set/clear register */
122 static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
123 {
124 void __iomem *reg = bank->base;
125 u32 l = GPIO_BIT(bank, gpio);
126
127 if (enable) {
128 reg += bank->regs->set_dataout;
129 bank->context.dataout |= l;
130 } else {
131 reg += bank->regs->clr_dataout;
132 bank->context.dataout &= ~l;
133 }
134
135 __raw_writel(l, reg);
136 }
137
138 /* set data out value using mask register */
139 static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
140 {
141 void __iomem *reg = bank->base + bank->regs->dataout;
142 u32 gpio_bit = GPIO_BIT(bank, gpio);
143 u32 l;
144
145 l = __raw_readl(reg);
146 if (enable)
147 l |= gpio_bit;
148 else
149 l &= ~gpio_bit;
150 __raw_writel(l, reg);
151 bank->context.dataout = l;
152 }
153
154 static int _get_gpio_datain(struct gpio_bank *bank, int offset)
155 {
156 void __iomem *reg = bank->base + bank->regs->datain;
157
158 return (__raw_readl(reg) & (1 << offset)) != 0;
159 }
160
161 static int _get_gpio_dataout(struct gpio_bank *bank, int offset)
162 {
163 void __iomem *reg = bank->base + bank->regs->dataout;
164
165 return (__raw_readl(reg) & (1 << offset)) != 0;
166 }
167
168 static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
169 {
170 int l = __raw_readl(base + reg);
171
172 if (set)
173 l |= mask;
174 else
175 l &= ~mask;
176
177 __raw_writel(l, base + reg);
178 }
179
180 static inline void _gpio_dbck_enable(struct gpio_bank *bank)
181 {
182 if (bank->dbck_enable_mask && !bank->dbck_enabled) {
183 clk_enable(bank->dbck);
184 bank->dbck_enabled = true;
185
186 __raw_writel(bank->dbck_enable_mask,
187 bank->base + bank->regs->debounce_en);
188 }
189 }
190
191 static inline void _gpio_dbck_disable(struct gpio_bank *bank)
192 {
193 if (bank->dbck_enable_mask && bank->dbck_enabled) {
194 /*
195 * Disable debounce before cutting it's clock. If debounce is
196 * enabled but the clock is not, GPIO module seems to be unable
197 * to detect events and generate interrupts at least on OMAP3.
198 */
199 __raw_writel(0, bank->base + bank->regs->debounce_en);
200
201 clk_disable(bank->dbck);
202 bank->dbck_enabled = false;
203 }
204 }
205
206 /**
207 * _set_gpio_debounce - low level gpio debounce time
208 * @bank: the gpio bank we're acting upon
209 * @gpio: the gpio number on this @gpio
210 * @debounce: debounce time to use
211 *
212 * OMAP's debounce time is in 31us steps so we need
213 * to convert and round up to the closest unit.
214 */
215 static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
216 unsigned debounce)
217 {
218 void __iomem *reg;
219 u32 val;
220 u32 l;
221
222 if (!bank->dbck_flag)
223 return;
224
225 if (debounce < 32)
226 debounce = 0x01;
227 else if (debounce > 7936)
228 debounce = 0xff;
229 else
230 debounce = (debounce / 0x1f) - 1;
231
232 l = GPIO_BIT(bank, gpio);
233
234 clk_enable(bank->dbck);
235 reg = bank->base + bank->regs->debounce;
236 __raw_writel(debounce, reg);
237
238 reg = bank->base + bank->regs->debounce_en;
239 val = __raw_readl(reg);
240
241 if (debounce)
242 val |= l;
243 else
244 val &= ~l;
245 bank->dbck_enable_mask = val;
246
247 __raw_writel(val, reg);
248 clk_disable(bank->dbck);
249 /*
250 * Enable debounce clock per module.
251 * This call is mandatory because in omap_gpio_request() when
252 * *_runtime_get_sync() is called, _gpio_dbck_enable() within
253 * runtime callbck fails to turn on dbck because dbck_enable_mask
254 * used within _gpio_dbck_enable() is still not initialized at
255 * that point. Therefore we have to enable dbck here.
256 */
257 _gpio_dbck_enable(bank);
258 if (bank->dbck_enable_mask) {
259 bank->context.debounce = debounce;
260 bank->context.debounce_en = val;
261 }
262 }
263
264 /**
265 * _clear_gpio_debounce - clear debounce settings for a gpio
266 * @bank: the gpio bank we're acting upon
267 * @gpio: the gpio number on this @gpio
268 *
269 * If a gpio is using debounce, then clear the debounce enable bit and if
270 * this is the only gpio in this bank using debounce, then clear the debounce
271 * time too. The debounce clock will also be disabled when calling this function
272 * if this is the only gpio in the bank using debounce.
273 */
274 static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
275 {
276 u32 gpio_bit = GPIO_BIT(bank, gpio);
277
278 if (!bank->dbck_flag)
279 return;
280
281 if (!(bank->dbck_enable_mask & gpio_bit))
282 return;
283
284 bank->dbck_enable_mask &= ~gpio_bit;
285 bank->context.debounce_en &= ~gpio_bit;
286 __raw_writel(bank->context.debounce_en,
287 bank->base + bank->regs->debounce_en);
288
289 if (!bank->dbck_enable_mask) {
290 bank->context.debounce = 0;
291 __raw_writel(bank->context.debounce, bank->base +
292 bank->regs->debounce);
293 clk_disable(bank->dbck);
294 bank->dbck_enabled = false;
295 }
296 }
297
298 static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
299 unsigned trigger)
300 {
301 void __iomem *base = bank->base;
302 u32 gpio_bit = 1 << gpio;
303
304 _gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
305 trigger & IRQ_TYPE_LEVEL_LOW);
306 _gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
307 trigger & IRQ_TYPE_LEVEL_HIGH);
308 _gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
309 trigger & IRQ_TYPE_EDGE_RISING);
310 _gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
311 trigger & IRQ_TYPE_EDGE_FALLING);
312
313 bank->context.leveldetect0 =
314 __raw_readl(bank->base + bank->regs->leveldetect0);
315 bank->context.leveldetect1 =
316 __raw_readl(bank->base + bank->regs->leveldetect1);
317 bank->context.risingdetect =
318 __raw_readl(bank->base + bank->regs->risingdetect);
319 bank->context.fallingdetect =
320 __raw_readl(bank->base + bank->regs->fallingdetect);
321
322 if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
323 _gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
324 bank->context.wake_en =
325 __raw_readl(bank->base + bank->regs->wkup_en);
326 }
327
328 /* This part needs to be executed always for OMAP{34xx, 44xx} */
329 if (!bank->regs->irqctrl) {
330 /* On omap24xx proceed only when valid GPIO bit is set */
331 if (bank->non_wakeup_gpios) {
332 if (!(bank->non_wakeup_gpios & gpio_bit))
333 goto exit;
334 }
335
336 /*
337 * Log the edge gpio and manually trigger the IRQ
338 * after resume if the input level changes
339 * to avoid irq lost during PER RET/OFF mode
340 * Applies for omap2 non-wakeup gpio and all omap3 gpios
341 */
342 if (trigger & IRQ_TYPE_EDGE_BOTH)
343 bank->enabled_non_wakeup_gpios |= gpio_bit;
344 else
345 bank->enabled_non_wakeup_gpios &= ~gpio_bit;
346 }
347
348 exit:
349 bank->level_mask =
350 __raw_readl(bank->base + bank->regs->leveldetect0) |
351 __raw_readl(bank->base + bank->regs->leveldetect1);
352 }
353
354 #ifdef CONFIG_ARCH_OMAP1
355 /*
356 * This only applies to chips that can't do both rising and falling edge
357 * detection at once. For all other chips, this function is a noop.
358 */
359 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
360 {
361 void __iomem *reg = bank->base;
362 u32 l = 0;
363
364 if (!bank->regs->irqctrl)
365 return;
366
367 reg += bank->regs->irqctrl;
368
369 l = __raw_readl(reg);
370 if ((l >> gpio) & 1)
371 l &= ~(1 << gpio);
372 else
373 l |= 1 << gpio;
374
375 __raw_writel(l, reg);
376 }
377 #else
378 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
379 #endif
380
381 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
382 unsigned trigger)
383 {
384 void __iomem *reg = bank->base;
385 void __iomem *base = bank->base;
386 u32 l = 0;
387
388 if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
389 set_gpio_trigger(bank, gpio, trigger);
390 } else if (bank->regs->irqctrl) {
391 reg += bank->regs->irqctrl;
392
393 l = __raw_readl(reg);
394 if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
395 bank->toggle_mask |= 1 << gpio;
396 if (trigger & IRQ_TYPE_EDGE_RISING)
397 l |= 1 << gpio;
398 else if (trigger & IRQ_TYPE_EDGE_FALLING)
399 l &= ~(1 << gpio);
400 else
401 return -EINVAL;
402
403 __raw_writel(l, reg);
404 } else if (bank->regs->edgectrl1) {
405 if (gpio & 0x08)
406 reg += bank->regs->edgectrl2;
407 else
408 reg += bank->regs->edgectrl1;
409
410 gpio &= 0x07;
411 l = __raw_readl(reg);
412 l &= ~(3 << (gpio << 1));
413 if (trigger & IRQ_TYPE_EDGE_RISING)
414 l |= 2 << (gpio << 1);
415 if (trigger & IRQ_TYPE_EDGE_FALLING)
416 l |= 1 << (gpio << 1);
417
418 /* Enable wake-up during idle for dynamic tick */
419 _gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
420 bank->context.wake_en =
421 __raw_readl(bank->base + bank->regs->wkup_en);
422 __raw_writel(l, reg);
423 }
424 return 0;
425 }
426
427 static void _enable_gpio_module(struct gpio_bank *bank, unsigned offset)
428 {
429 if (bank->regs->pinctrl) {
430 void __iomem *reg = bank->base + bank->regs->pinctrl;
431
432 /* Claim the pin for MPU */
433 __raw_writel(__raw_readl(reg) | (1 << offset), reg);
434 }
435
436 if (bank->regs->ctrl && !BANK_USED(bank)) {
437 void __iomem *reg = bank->base + bank->regs->ctrl;
438 u32 ctrl;
439
440 ctrl = __raw_readl(reg);
441 /* Module is enabled, clocks are not gated */
442 ctrl &= ~GPIO_MOD_CTRL_BIT;
443 __raw_writel(ctrl, reg);
444 bank->context.ctrl = ctrl;
445 }
446 }
447
448 static void _disable_gpio_module(struct gpio_bank *bank, unsigned offset)
449 {
450 void __iomem *base = bank->base;
451
452 if (bank->regs->wkup_en &&
453 !LINE_USED(bank->mod_usage, offset) &&
454 !LINE_USED(bank->irq_usage, offset)) {
455 /* Disable wake-up during idle for dynamic tick */
456 _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
457 bank->context.wake_en =
458 __raw_readl(bank->base + bank->regs->wkup_en);
459 }
460
461 if (bank->regs->ctrl && !BANK_USED(bank)) {
462 void __iomem *reg = bank->base + bank->regs->ctrl;
463 u32 ctrl;
464
465 ctrl = __raw_readl(reg);
466 /* Module is disabled, clocks are gated */
467 ctrl |= GPIO_MOD_CTRL_BIT;
468 __raw_writel(ctrl, reg);
469 bank->context.ctrl = ctrl;
470 }
471 }
472
473 static int gpio_is_input(struct gpio_bank *bank, int mask)
474 {
475 void __iomem *reg = bank->base + bank->regs->direction;
476
477 return __raw_readl(reg) & mask;
478 }
479
480 static int gpio_irq_type(struct irq_data *d, unsigned type)
481 {
482 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
483 unsigned gpio = 0;
484 int retval;
485 unsigned long flags;
486 unsigned offset;
487
488 if (!BANK_USED(bank))
489 pm_runtime_get_sync(bank->dev);
490
491 #ifdef CONFIG_ARCH_OMAP1
492 if (d->irq > IH_MPUIO_BASE)
493 gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
494 #endif
495
496 if (!gpio)
497 gpio = irq_to_gpio(bank, d->hwirq);
498
499 if (type & ~IRQ_TYPE_SENSE_MASK)
500 return -EINVAL;
501
502 if (!bank->regs->leveldetect0 &&
503 (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
504 return -EINVAL;
505
506 spin_lock_irqsave(&bank->lock, flags);
507 offset = GPIO_INDEX(bank, gpio);
508 retval = _set_gpio_triggering(bank, offset, type);
509 if (!LINE_USED(bank->mod_usage, offset)) {
510 _enable_gpio_module(bank, offset);
511 _set_gpio_direction(bank, offset, 1);
512 } else if (!gpio_is_input(bank, 1 << offset)) {
513 spin_unlock_irqrestore(&bank->lock, flags);
514 return -EINVAL;
515 }
516
517 bank->irq_usage |= 1 << GPIO_INDEX(bank, gpio);
518 spin_unlock_irqrestore(&bank->lock, flags);
519
520 if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
521 __irq_set_handler_locked(d->irq, handle_level_irq);
522 else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
523 __irq_set_handler_locked(d->irq, handle_edge_irq);
524
525 return retval;
526 }
527
528 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
529 {
530 void __iomem *reg = bank->base;
531
532 reg += bank->regs->irqstatus;
533 __raw_writel(gpio_mask, reg);
534
535 /* Workaround for clearing DSP GPIO interrupts to allow retention */
536 if (bank->regs->irqstatus2) {
537 reg = bank->base + bank->regs->irqstatus2;
538 __raw_writel(gpio_mask, reg);
539 }
540
541 /* Flush posted write for the irq status to avoid spurious interrupts */
542 __raw_readl(reg);
543 }
544
545 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
546 {
547 _clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
548 }
549
550 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
551 {
552 void __iomem *reg = bank->base;
553 u32 l;
554 u32 mask = (1 << bank->width) - 1;
555
556 reg += bank->regs->irqenable;
557 l = __raw_readl(reg);
558 if (bank->regs->irqenable_inv)
559 l = ~l;
560 l &= mask;
561 return l;
562 }
563
564 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
565 {
566 void __iomem *reg = bank->base;
567 u32 l;
568
569 if (bank->regs->set_irqenable) {
570 reg += bank->regs->set_irqenable;
571 l = gpio_mask;
572 bank->context.irqenable1 |= gpio_mask;
573 } else {
574 reg += bank->regs->irqenable;
575 l = __raw_readl(reg);
576 if (bank->regs->irqenable_inv)
577 l &= ~gpio_mask;
578 else
579 l |= gpio_mask;
580 bank->context.irqenable1 = l;
581 }
582
583 __raw_writel(l, reg);
584 }
585
586 static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
587 {
588 void __iomem *reg = bank->base;
589 u32 l;
590
591 if (bank->regs->clr_irqenable) {
592 reg += bank->regs->clr_irqenable;
593 l = gpio_mask;
594 bank->context.irqenable1 &= ~gpio_mask;
595 } else {
596 reg += bank->regs->irqenable;
597 l = __raw_readl(reg);
598 if (bank->regs->irqenable_inv)
599 l |= gpio_mask;
600 else
601 l &= ~gpio_mask;
602 bank->context.irqenable1 = l;
603 }
604
605 __raw_writel(l, reg);
606 }
607
608 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
609 {
610 if (enable)
611 _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
612 else
613 _disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
614 }
615
616 /*
617 * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
618 * 1510 does not seem to have a wake-up register. If JTAG is connected
619 * to the target, system will wake up always on GPIO events. While
620 * system is running all registered GPIO interrupts need to have wake-up
621 * enabled. When system is suspended, only selected GPIO interrupts need
622 * to have wake-up enabled.
623 */
624 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
625 {
626 u32 gpio_bit = GPIO_BIT(bank, gpio);
627 unsigned long flags;
628
629 if (bank->non_wakeup_gpios & gpio_bit) {
630 dev_err(bank->dev,
631 "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
632 return -EINVAL;
633 }
634
635 spin_lock_irqsave(&bank->lock, flags);
636 if (enable)
637 bank->context.wake_en |= gpio_bit;
638 else
639 bank->context.wake_en &= ~gpio_bit;
640
641 __raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
642 spin_unlock_irqrestore(&bank->lock, flags);
643
644 return 0;
645 }
646
647 static void _reset_gpio(struct gpio_bank *bank, int gpio)
648 {
649 _set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
650 _set_gpio_irqenable(bank, gpio, 0);
651 _clear_gpio_irqstatus(bank, gpio);
652 _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
653 _clear_gpio_debounce(bank, gpio);
654 }
655
656 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
657 static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
658 {
659 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
660 unsigned int gpio = irq_to_gpio(bank, d->hwirq);
661
662 return _set_gpio_wakeup(bank, gpio, enable);
663 }
664
665 static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
666 {
667 struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
668 unsigned long flags;
669
670 /*
671 * If this is the first gpio_request for the bank,
672 * enable the bank module.
673 */
674 if (!BANK_USED(bank))
675 pm_runtime_get_sync(bank->dev);
676
677 spin_lock_irqsave(&bank->lock, flags);
678 /* Set trigger to none. You need to enable the desired trigger with
679 * request_irq() or set_irq_type(). Only do this if the IRQ line has
680 * not already been requested.
681 */
682 if (!LINE_USED(bank->irq_usage, offset)) {
683 _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
684 _enable_gpio_module(bank, offset);
685 }
686 bank->mod_usage |= 1 << offset;
687 spin_unlock_irqrestore(&bank->lock, flags);
688
689 return 0;
690 }
691
692 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
693 {
694 struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
695 unsigned long flags;
696
697 spin_lock_irqsave(&bank->lock, flags);
698 bank->mod_usage &= ~(1 << offset);
699 _disable_gpio_module(bank, offset);
700 _reset_gpio(bank, bank->chip.base + offset);
701 spin_unlock_irqrestore(&bank->lock, flags);
702
703 /*
704 * If this is the last gpio to be freed in the bank,
705 * disable the bank module.
706 */
707 if (!BANK_USED(bank))
708 pm_runtime_put(bank->dev);
709 }
710
711 /*
712 * We need to unmask the GPIO bank interrupt as soon as possible to
713 * avoid missing GPIO interrupts for other lines in the bank.
714 * Then we need to mask-read-clear-unmask the triggered GPIO lines
715 * in the bank to avoid missing nested interrupts for a GPIO line.
716 * If we wait to unmask individual GPIO lines in the bank after the
717 * line's interrupt handler has been run, we may miss some nested
718 * interrupts.
719 */
720 static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
721 {
722 void __iomem *isr_reg = NULL;
723 u32 isr;
724 unsigned int bit;
725 struct gpio_bank *bank;
726 int unmasked = 0;
727 struct irq_chip *chip = irq_desc_get_chip(desc);
728
729 chained_irq_enter(chip, desc);
730
731 bank = irq_get_handler_data(irq);
732 isr_reg = bank->base + bank->regs->irqstatus;
733 pm_runtime_get_sync(bank->dev);
734
735 if (WARN_ON(!isr_reg))
736 goto exit;
737
738 while (1) {
739 u32 isr_saved, level_mask = 0;
740 u32 enabled;
741
742 enabled = _get_gpio_irqbank_mask(bank);
743 isr_saved = isr = __raw_readl(isr_reg) & enabled;
744
745 if (bank->level_mask)
746 level_mask = bank->level_mask & enabled;
747
748 /* clear edge sensitive interrupts before handler(s) are
749 called so that we don't miss any interrupt occurred while
750 executing them */
751 _disable_gpio_irqbank(bank, isr_saved & ~level_mask);
752 _clear_gpio_irqbank(bank, isr_saved & ~level_mask);
753 _enable_gpio_irqbank(bank, isr_saved & ~level_mask);
754
755 /* if there is only edge sensitive GPIO pin interrupts
756 configured, we could unmask GPIO bank interrupt immediately */
757 if (!level_mask && !unmasked) {
758 unmasked = 1;
759 chained_irq_exit(chip, desc);
760 }
761
762 if (!isr)
763 break;
764
765 while (isr) {
766 bit = __ffs(isr);
767 isr &= ~(1 << bit);
768
769 /*
770 * Some chips can't respond to both rising and falling
771 * at the same time. If this irq was requested with
772 * both flags, we need to flip the ICR data for the IRQ
773 * to respond to the IRQ for the opposite direction.
774 * This will be indicated in the bank toggle_mask.
775 */
776 if (bank->toggle_mask & (1 << bit))
777 _toggle_gpio_edge_triggering(bank, bit);
778
779 generic_handle_irq(irq_find_mapping(bank->domain, bit));
780 }
781 }
782 /* if bank has any level sensitive GPIO pin interrupt
783 configured, we must unmask the bank interrupt only after
784 handler(s) are executed in order to avoid spurious bank
785 interrupt */
786 exit:
787 if (!unmasked)
788 chained_irq_exit(chip, desc);
789 pm_runtime_put(bank->dev);
790 }
791
792 static void gpio_irq_shutdown(struct irq_data *d)
793 {
794 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
795 unsigned int gpio = irq_to_gpio(bank, d->hwirq);
796 unsigned long flags;
797 unsigned offset = GPIO_INDEX(bank, gpio);
798
799 spin_lock_irqsave(&bank->lock, flags);
800 bank->irq_usage &= ~(1 << offset);
801 _disable_gpio_module(bank, offset);
802 _reset_gpio(bank, gpio);
803 spin_unlock_irqrestore(&bank->lock, flags);
804
805 /*
806 * If this is the last IRQ to be freed in the bank,
807 * disable the bank module.
808 */
809 if (!BANK_USED(bank))
810 pm_runtime_put(bank->dev);
811 }
812
813 static void gpio_ack_irq(struct irq_data *d)
814 {
815 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
816 unsigned int gpio = irq_to_gpio(bank, d->hwirq);
817
818 _clear_gpio_irqstatus(bank, gpio);
819 }
820
821 static void gpio_mask_irq(struct irq_data *d)
822 {
823 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
824 unsigned int gpio = irq_to_gpio(bank, d->hwirq);
825 unsigned long flags;
826
827 spin_lock_irqsave(&bank->lock, flags);
828 _set_gpio_irqenable(bank, gpio, 0);
829 _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
830 spin_unlock_irqrestore(&bank->lock, flags);
831 }
832
833 static void gpio_unmask_irq(struct irq_data *d)
834 {
835 struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
836 unsigned int gpio = irq_to_gpio(bank, d->hwirq);
837 unsigned int irq_mask = GPIO_BIT(bank, gpio);
838 u32 trigger = irqd_get_trigger_type(d);
839 unsigned long flags;
840
841 spin_lock_irqsave(&bank->lock, flags);
842 if (trigger)
843 _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
844
845 /* For level-triggered GPIOs, the clearing must be done after
846 * the HW source is cleared, thus after the handler has run */
847 if (bank->level_mask & irq_mask) {
848 _set_gpio_irqenable(bank, gpio, 0);
849 _clear_gpio_irqstatus(bank, gpio);
850 }
851
852 _set_gpio_irqenable(bank, gpio, 1);
853 spin_unlock_irqrestore(&bank->lock, flags);
854 }
855
856 static struct irq_chip gpio_irq_chip = {
857 .name = "GPIO",
858 .irq_shutdown = gpio_irq_shutdown,
859 .irq_ack = gpio_ack_irq,
860 .irq_mask = gpio_mask_irq,
861 .irq_unmask = gpio_unmask_irq,
862 .irq_set_type = gpio_irq_type,
863 .irq_set_wake = gpio_wake_enable,
864 };
865
866 /*---------------------------------------------------------------------*/
867
868 static int omap_mpuio_suspend_noirq(struct device *dev)
869 {
870 struct platform_device *pdev = to_platform_device(dev);
871 struct gpio_bank *bank = platform_get_drvdata(pdev);
872 void __iomem *mask_reg = bank->base +
873 OMAP_MPUIO_GPIO_MASKIT / bank->stride;
874 unsigned long flags;
875
876 spin_lock_irqsave(&bank->lock, flags);
877 __raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
878 spin_unlock_irqrestore(&bank->lock, flags);
879
880 return 0;
881 }
882
883 static int omap_mpuio_resume_noirq(struct device *dev)
884 {
885 struct platform_device *pdev = to_platform_device(dev);
886 struct gpio_bank *bank = platform_get_drvdata(pdev);
887 void __iomem *mask_reg = bank->base +
888 OMAP_MPUIO_GPIO_MASKIT / bank->stride;
889 unsigned long flags;
890
891 spin_lock_irqsave(&bank->lock, flags);
892 __raw_writel(bank->context.wake_en, mask_reg);
893 spin_unlock_irqrestore(&bank->lock, flags);
894
895 return 0;
896 }
897
898 static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
899 .suspend_noirq = omap_mpuio_suspend_noirq,
900 .resume_noirq = omap_mpuio_resume_noirq,
901 };
902
903 /* use platform_driver for this. */
904 static struct platform_driver omap_mpuio_driver = {
905 .driver = {
906 .name = "mpuio",
907 .pm = &omap_mpuio_dev_pm_ops,
908 },
909 };
910
911 static struct platform_device omap_mpuio_device = {
912 .name = "mpuio",
913 .id = -1,
914 .dev = {
915 .driver = &omap_mpuio_driver.driver,
916 }
917 /* could list the /proc/iomem resources */
918 };
919
920 static inline void mpuio_init(struct gpio_bank *bank)
921 {
922 platform_set_drvdata(&omap_mpuio_device, bank);
923
924 if (platform_driver_register(&omap_mpuio_driver) == 0)
925 (void) platform_device_register(&omap_mpuio_device);
926 }
927
928 /*---------------------------------------------------------------------*/
929
930 static int gpio_input(struct gpio_chip *chip, unsigned offset)
931 {
932 struct gpio_bank *bank;
933 unsigned long flags;
934
935 bank = container_of(chip, struct gpio_bank, chip);
936 spin_lock_irqsave(&bank->lock, flags);
937 _set_gpio_direction(bank, offset, 1);
938 spin_unlock_irqrestore(&bank->lock, flags);
939 return 0;
940 }
941
942 static int gpio_get(struct gpio_chip *chip, unsigned offset)
943 {
944 struct gpio_bank *bank;
945 u32 mask;
946
947 bank = container_of(chip, struct gpio_bank, chip);
948 mask = (1 << offset);
949
950 if (gpio_is_input(bank, mask))
951 return _get_gpio_datain(bank, offset);
952 else
953 return _get_gpio_dataout(bank, offset);
954 }
955
956 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
957 {
958 struct gpio_bank *bank;
959 unsigned long flags;
960 int retval = 0;
961
962 bank = container_of(chip, struct gpio_bank, chip);
963 spin_lock_irqsave(&bank->lock, flags);
964
965 if (LINE_USED(bank->irq_usage, offset)) {
966 retval = -EINVAL;
967 goto exit;
968 }
969
970 bank->set_dataout(bank, offset, value);
971 _set_gpio_direction(bank, offset, 0);
972
973 exit:
974 spin_unlock_irqrestore(&bank->lock, flags);
975 return retval;
976 }
977
978 static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
979 unsigned debounce)
980 {
981 struct gpio_bank *bank;
982 unsigned long flags;
983
984 bank = container_of(chip, struct gpio_bank, chip);
985
986 spin_lock_irqsave(&bank->lock, flags);
987 _set_gpio_debounce(bank, offset, debounce);
988 spin_unlock_irqrestore(&bank->lock, flags);
989
990 return 0;
991 }
992
993 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
994 {
995 struct gpio_bank *bank;
996 unsigned long flags;
997
998 bank = container_of(chip, struct gpio_bank, chip);
999 spin_lock_irqsave(&bank->lock, flags);
1000 bank->set_dataout(bank, offset, value);
1001 spin_unlock_irqrestore(&bank->lock, flags);
1002 }
1003
1004 /*---------------------------------------------------------------------*/
1005
1006 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
1007 {
1008 static bool called;
1009 u32 rev;
1010
1011 if (called || bank->regs->revision == USHRT_MAX)
1012 return;
1013
1014 rev = __raw_readw(bank->base + bank->regs->revision);
1015 pr_info("OMAP GPIO hardware version %d.%d\n",
1016 (rev >> 4) & 0x0f, rev & 0x0f);
1017
1018 called = true;
1019 }
1020
1021 /* This lock class tells lockdep that GPIO irqs are in a different
1022 * category than their parents, so it won't report false recursion.
1023 */
1024 static struct lock_class_key gpio_lock_class;
1025
1026 static void omap_gpio_mod_init(struct gpio_bank *bank)
1027 {
1028 void __iomem *base = bank->base;
1029 u32 l = 0xffffffff;
1030
1031 if (bank->width == 16)
1032 l = 0xffff;
1033
1034 if (bank->is_mpuio) {
1035 __raw_writel(l, bank->base + bank->regs->irqenable);
1036 return;
1037 }
1038
1039 _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
1040 _gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv);
1041 if (bank->regs->debounce_en)
1042 __raw_writel(0, base + bank->regs->debounce_en);
1043
1044 /* Save OE default value (0xffffffff) in the context */
1045 bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
1046 /* Initialize interface clk ungated, module enabled */
1047 if (bank->regs->ctrl)
1048 __raw_writel(0, base + bank->regs->ctrl);
1049
1050 bank->dbck = clk_get(bank->dev, "dbclk");
1051 if (IS_ERR(bank->dbck))
1052 dev_err(bank->dev, "Could not get gpio dbck\n");
1053 }
1054
1055 static void
1056 omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
1057 unsigned int num)
1058 {
1059 struct irq_chip_generic *gc;
1060 struct irq_chip_type *ct;
1061
1062 gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
1063 handle_simple_irq);
1064 if (!gc) {
1065 dev_err(bank->dev, "Memory alloc failed for gc\n");
1066 return;
1067 }
1068
1069 ct = gc->chip_types;
1070
1071 /* NOTE: No ack required, reading IRQ status clears it. */
1072 ct->chip.irq_mask = irq_gc_mask_set_bit;
1073 ct->chip.irq_unmask = irq_gc_mask_clr_bit;
1074 ct->chip.irq_set_type = gpio_irq_type;
1075
1076 if (bank->regs->wkup_en)
1077 ct->chip.irq_set_wake = gpio_wake_enable,
1078
1079 ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
1080 irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
1081 IRQ_NOREQUEST | IRQ_NOPROBE, 0);
1082 }
1083
1084 static void omap_gpio_chip_init(struct gpio_bank *bank)
1085 {
1086 int j;
1087 static int gpio;
1088
1089 /*
1090 * REVISIT eventually switch from OMAP-specific gpio structs
1091 * over to the generic ones
1092 */
1093 bank->chip.request = omap_gpio_request;
1094 bank->chip.free = omap_gpio_free;
1095 bank->chip.direction_input = gpio_input;
1096 bank->chip.get = gpio_get;
1097 bank->chip.direction_output = gpio_output;
1098 bank->chip.set_debounce = gpio_debounce;
1099 bank->chip.set = gpio_set;
1100 bank->chip.to_irq = omap_gpio_to_irq;
1101 if (bank->is_mpuio) {
1102 bank->chip.label = "mpuio";
1103 if (bank->regs->wkup_en)
1104 bank->chip.dev = &omap_mpuio_device.dev;
1105 bank->chip.base = OMAP_MPUIO(0);
1106 } else {
1107 bank->chip.label = "gpio";
1108 bank->chip.base = gpio;
1109 gpio += bank->width;
1110 }
1111 bank->chip.ngpio = bank->width;
1112
1113 gpiochip_add(&bank->chip);
1114
1115 for (j = 0; j < bank->width; j++) {
1116 int irq = irq_create_mapping(bank->domain, j);
1117 irq_set_lockdep_class(irq, &gpio_lock_class);
1118 irq_set_chip_data(irq, bank);
1119 if (bank->is_mpuio) {
1120 omap_mpuio_alloc_gc(bank, irq, bank->width);
1121 } else {
1122 irq_set_chip_and_handler(irq, &gpio_irq_chip,
1123 handle_simple_irq);
1124 set_irq_flags(irq, IRQF_VALID);
1125 }
1126 }
1127 irq_set_chained_handler(bank->irq, gpio_irq_handler);
1128 irq_set_handler_data(bank->irq, bank);
1129 }
1130
1131 static const struct of_device_id omap_gpio_match[];
1132
1133 static int omap_gpio_probe(struct platform_device *pdev)
1134 {
1135 struct device *dev = &pdev->dev;
1136 struct device_node *node = dev->of_node;
1137 const struct of_device_id *match;
1138 const struct omap_gpio_platform_data *pdata;
1139 struct resource *res;
1140 struct gpio_bank *bank;
1141 #ifdef CONFIG_ARCH_OMAP1
1142 int irq_base;
1143 #endif
1144
1145 match = of_match_device(of_match_ptr(omap_gpio_match), dev);
1146
1147 pdata = match ? match->data : dev->platform_data;
1148 if (!pdata)
1149 return -EINVAL;
1150
1151 bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
1152 if (!bank) {
1153 dev_err(dev, "Memory alloc failed\n");
1154 return -ENOMEM;
1155 }
1156
1157 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1158 if (unlikely(!res)) {
1159 dev_err(dev, "Invalid IRQ resource\n");
1160 return -ENODEV;
1161 }
1162
1163 bank->irq = res->start;
1164 bank->dev = dev;
1165 bank->dbck_flag = pdata->dbck_flag;
1166 bank->stride = pdata->bank_stride;
1167 bank->width = pdata->bank_width;
1168 bank->is_mpuio = pdata->is_mpuio;
1169 bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
1170 bank->regs = pdata->regs;
1171 #ifdef CONFIG_OF_GPIO
1172 bank->chip.of_node = of_node_get(node);
1173 #endif
1174 if (node) {
1175 if (!of_property_read_bool(node, "ti,gpio-always-on"))
1176 bank->loses_context = true;
1177 } else {
1178 bank->loses_context = pdata->loses_context;
1179
1180 if (bank->loses_context)
1181 bank->get_context_loss_count =
1182 pdata->get_context_loss_count;
1183 }
1184
1185 #ifdef CONFIG_ARCH_OMAP1
1186 /*
1187 * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
1188 * irq_alloc_descs() and irq_domain_add_legacy() and just use a
1189 * linear IRQ domain mapping for all OMAP platforms.
1190 */
1191 irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
1192 if (irq_base < 0) {
1193 dev_err(dev, "Couldn't allocate IRQ numbers\n");
1194 return -ENODEV;
1195 }
1196
1197 bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
1198 0, &irq_domain_simple_ops, NULL);
1199 #else
1200 bank->domain = irq_domain_add_linear(node, bank->width,
1201 &irq_domain_simple_ops, NULL);
1202 #endif
1203 if (!bank->domain) {
1204 dev_err(dev, "Couldn't register an IRQ domain\n");
1205 return -ENODEV;
1206 }
1207
1208 if (bank->regs->set_dataout && bank->regs->clr_dataout)
1209 bank->set_dataout = _set_gpio_dataout_reg;
1210 else
1211 bank->set_dataout = _set_gpio_dataout_mask;
1212
1213 spin_lock_init(&bank->lock);
1214
1215 /* Static mapping, never released */
1216 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1217 if (unlikely(!res)) {
1218 dev_err(dev, "Invalid mem resource\n");
1219 irq_domain_remove(bank->domain);
1220 return -ENODEV;
1221 }
1222
1223 if (!devm_request_mem_region(dev, res->start, resource_size(res),
1224 pdev->name)) {
1225 dev_err(dev, "Region already claimed\n");
1226 irq_domain_remove(bank->domain);
1227 return -EBUSY;
1228 }
1229
1230 bank->base = devm_ioremap(dev, res->start, resource_size(res));
1231 if (!bank->base) {
1232 dev_err(dev, "Could not ioremap\n");
1233 irq_domain_remove(bank->domain);
1234 return -ENOMEM;
1235 }
1236
1237 platform_set_drvdata(pdev, bank);
1238
1239 pm_runtime_enable(bank->dev);
1240 pm_runtime_irq_safe(bank->dev);
1241 pm_runtime_get_sync(bank->dev);
1242
1243 if (bank->is_mpuio)
1244 mpuio_init(bank);
1245
1246 omap_gpio_mod_init(bank);
1247 omap_gpio_chip_init(bank);
1248 omap_gpio_show_rev(bank);
1249
1250 pm_runtime_put(bank->dev);
1251
1252 list_add_tail(&bank->node, &omap_gpio_list);
1253
1254 return 0;
1255 }
1256
1257 #ifdef CONFIG_ARCH_OMAP2PLUS
1258
1259 #if defined(CONFIG_PM_RUNTIME)
1260 static void omap_gpio_restore_context(struct gpio_bank *bank);
1261
1262 static int omap_gpio_runtime_suspend(struct device *dev)
1263 {
1264 struct platform_device *pdev = to_platform_device(dev);
1265 struct gpio_bank *bank = platform_get_drvdata(pdev);
1266 u32 l1 = 0, l2 = 0;
1267 unsigned long flags;
1268 u32 wake_low, wake_hi;
1269
1270 spin_lock_irqsave(&bank->lock, flags);
1271
1272 /*
1273 * Only edges can generate a wakeup event to the PRCM.
1274 *
1275 * Therefore, ensure any wake-up capable GPIOs have
1276 * edge-detection enabled before going idle to ensure a wakeup
1277 * to the PRCM is generated on a GPIO transition. (c.f. 34xx
1278 * NDA TRM 25.5.3.1)
1279 *
1280 * The normal values will be restored upon ->runtime_resume()
1281 * by writing back the values saved in bank->context.
1282 */
1283 wake_low = bank->context.leveldetect0 & bank->context.wake_en;
1284 if (wake_low)
1285 __raw_writel(wake_low | bank->context.fallingdetect,
1286 bank->base + bank->regs->fallingdetect);
1287 wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
1288 if (wake_hi)
1289 __raw_writel(wake_hi | bank->context.risingdetect,
1290 bank->base + bank->regs->risingdetect);
1291
1292 if (!bank->enabled_non_wakeup_gpios)
1293 goto update_gpio_context_count;
1294
1295 if (bank->power_mode != OFF_MODE) {
1296 bank->power_mode = 0;
1297 goto update_gpio_context_count;
1298 }
1299 /*
1300 * If going to OFF, remove triggering for all
1301 * non-wakeup GPIOs. Otherwise spurious IRQs will be
1302 * generated. See OMAP2420 Errata item 1.101.
1303 */
1304 bank->saved_datain = __raw_readl(bank->base +
1305 bank->regs->datain);
1306 l1 = bank->context.fallingdetect;
1307 l2 = bank->context.risingdetect;
1308
1309 l1 &= ~bank->enabled_non_wakeup_gpios;
1310 l2 &= ~bank->enabled_non_wakeup_gpios;
1311
1312 __raw_writel(l1, bank->base + bank->regs->fallingdetect);
1313 __raw_writel(l2, bank->base + bank->regs->risingdetect);
1314
1315 bank->workaround_enabled = true;
1316
1317 update_gpio_context_count:
1318 if (bank->get_context_loss_count)
1319 bank->context_loss_count =
1320 bank->get_context_loss_count(bank->dev);
1321
1322 _gpio_dbck_disable(bank);
1323 spin_unlock_irqrestore(&bank->lock, flags);
1324
1325 return 0;
1326 }
1327
1328 static void omap_gpio_init_context(struct gpio_bank *p);
1329
1330 static int omap_gpio_runtime_resume(struct device *dev)
1331 {
1332 struct platform_device *pdev = to_platform_device(dev);
1333 struct gpio_bank *bank = platform_get_drvdata(pdev);
1334 u32 l = 0, gen, gen0, gen1;
1335 unsigned long flags;
1336 int c;
1337
1338 spin_lock_irqsave(&bank->lock, flags);
1339
1340 /*
1341 * On the first resume during the probe, the context has not
1342 * been initialised and so initialise it now. Also initialise
1343 * the context loss count.
1344 */
1345 if (bank->loses_context && !bank->context_valid) {
1346 omap_gpio_init_context(bank);
1347
1348 if (bank->get_context_loss_count)
1349 bank->context_loss_count =
1350 bank->get_context_loss_count(bank->dev);
1351 }
1352
1353 _gpio_dbck_enable(bank);
1354
1355 /*
1356 * In ->runtime_suspend(), level-triggered, wakeup-enabled
1357 * GPIOs were set to edge trigger also in order to be able to
1358 * generate a PRCM wakeup. Here we restore the
1359 * pre-runtime_suspend() values for edge triggering.
1360 */
1361 __raw_writel(bank->context.fallingdetect,
1362 bank->base + bank->regs->fallingdetect);
1363 __raw_writel(bank->context.risingdetect,
1364 bank->base + bank->regs->risingdetect);
1365
1366 if (bank->loses_context) {
1367 if (!bank->get_context_loss_count) {
1368 omap_gpio_restore_context(bank);
1369 } else {
1370 c = bank->get_context_loss_count(bank->dev);
1371 if (c != bank->context_loss_count) {
1372 omap_gpio_restore_context(bank);
1373 } else {
1374 spin_unlock_irqrestore(&bank->lock, flags);
1375 return 0;
1376 }
1377 }
1378 }
1379
1380 if (!bank->workaround_enabled) {
1381 spin_unlock_irqrestore(&bank->lock, flags);
1382 return 0;
1383 }
1384
1385 l = __raw_readl(bank->base + bank->regs->datain);
1386
1387 /*
1388 * Check if any of the non-wakeup interrupt GPIOs have changed
1389 * state. If so, generate an IRQ by software. This is
1390 * horribly racy, but it's the best we can do to work around
1391 * this silicon bug.
1392 */
1393 l ^= bank->saved_datain;
1394 l &= bank->enabled_non_wakeup_gpios;
1395
1396 /*
1397 * No need to generate IRQs for the rising edge for gpio IRQs
1398 * configured with falling edge only; and vice versa.
1399 */
1400 gen0 = l & bank->context.fallingdetect;
1401 gen0 &= bank->saved_datain;
1402
1403 gen1 = l & bank->context.risingdetect;
1404 gen1 &= ~(bank->saved_datain);
1405
1406 /* FIXME: Consider GPIO IRQs with level detections properly! */
1407 gen = l & (~(bank->context.fallingdetect) &
1408 ~(bank->context.risingdetect));
1409 /* Consider all GPIO IRQs needed to be updated */
1410 gen |= gen0 | gen1;
1411
1412 if (gen) {
1413 u32 old0, old1;
1414
1415 old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
1416 old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
1417
1418 if (!bank->regs->irqstatus_raw0) {
1419 __raw_writel(old0 | gen, bank->base +
1420 bank->regs->leveldetect0);
1421 __raw_writel(old1 | gen, bank->base +
1422 bank->regs->leveldetect1);
1423 }
1424
1425 if (bank->regs->irqstatus_raw0) {
1426 __raw_writel(old0 | l, bank->base +
1427 bank->regs->leveldetect0);
1428 __raw_writel(old1 | l, bank->base +
1429 bank->regs->leveldetect1);
1430 }
1431 __raw_writel(old0, bank->base + bank->regs->leveldetect0);
1432 __raw_writel(old1, bank->base + bank->regs->leveldetect1);
1433 }
1434
1435 bank->workaround_enabled = false;
1436 spin_unlock_irqrestore(&bank->lock, flags);
1437
1438 return 0;
1439 }
1440 #endif /* CONFIG_PM_RUNTIME */
1441
1442 void omap2_gpio_prepare_for_idle(int pwr_mode)
1443 {
1444 struct gpio_bank *bank;
1445
1446 list_for_each_entry(bank, &omap_gpio_list, node) {
1447 if (!BANK_USED(bank) || !bank->loses_context)
1448 continue;
1449
1450 bank->power_mode = pwr_mode;
1451
1452 pm_runtime_put_sync_suspend(bank->dev);
1453 }
1454 }
1455
1456 void omap2_gpio_resume_after_idle(void)
1457 {
1458 struct gpio_bank *bank;
1459
1460 list_for_each_entry(bank, &omap_gpio_list, node) {
1461 if (!BANK_USED(bank) || !bank->loses_context)
1462 continue;
1463
1464 pm_runtime_get_sync(bank->dev);
1465 }
1466 }
1467
1468 #if defined(CONFIG_PM_RUNTIME)
1469 static void omap_gpio_init_context(struct gpio_bank *p)
1470 {
1471 struct omap_gpio_reg_offs *regs = p->regs;
1472 void __iomem *base = p->base;
1473
1474 p->context.ctrl = __raw_readl(base + regs->ctrl);
1475 p->context.oe = __raw_readl(base + regs->direction);
1476 p->context.wake_en = __raw_readl(base + regs->wkup_en);
1477 p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0);
1478 p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1);
1479 p->context.risingdetect = __raw_readl(base + regs->risingdetect);
1480 p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
1481 p->context.irqenable1 = __raw_readl(base + regs->irqenable);
1482 p->context.irqenable2 = __raw_readl(base + regs->irqenable2);
1483
1484 if (regs->set_dataout && p->regs->clr_dataout)
1485 p->context.dataout = __raw_readl(base + regs->set_dataout);
1486 else
1487 p->context.dataout = __raw_readl(base + regs->dataout);
1488
1489 p->context_valid = true;
1490 }
1491
1492 static void omap_gpio_restore_context(struct gpio_bank *bank)
1493 {
1494 __raw_writel(bank->context.wake_en,
1495 bank->base + bank->regs->wkup_en);
1496 __raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
1497 __raw_writel(bank->context.leveldetect0,
1498 bank->base + bank->regs->leveldetect0);
1499 __raw_writel(bank->context.leveldetect1,
1500 bank->base + bank->regs->leveldetect1);
1501 __raw_writel(bank->context.risingdetect,
1502 bank->base + bank->regs->risingdetect);
1503 __raw_writel(bank->context.fallingdetect,
1504 bank->base + bank->regs->fallingdetect);
1505 if (bank->regs->set_dataout && bank->regs->clr_dataout)
1506 __raw_writel(bank->context.dataout,
1507 bank->base + bank->regs->set_dataout);
1508 else
1509 __raw_writel(bank->context.dataout,
1510 bank->base + bank->regs->dataout);
1511 __raw_writel(bank->context.oe, bank->base + bank->regs->direction);
1512
1513 if (bank->dbck_enable_mask) {
1514 __raw_writel(bank->context.debounce, bank->base +
1515 bank->regs->debounce);
1516 __raw_writel(bank->context.debounce_en,
1517 bank->base + bank->regs->debounce_en);
1518 }
1519
1520 __raw_writel(bank->context.irqenable1,
1521 bank->base + bank->regs->irqenable);
1522 __raw_writel(bank->context.irqenable2,
1523 bank->base + bank->regs->irqenable2);
1524 }
1525 #endif /* CONFIG_PM_RUNTIME */
1526 #else
1527 #define omap_gpio_runtime_suspend NULL
1528 #define omap_gpio_runtime_resume NULL
1529 static void omap_gpio_init_context(struct gpio_bank *p) {}
1530 #endif
1531
1532 static const struct dev_pm_ops gpio_pm_ops = {
1533 SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
1534 NULL)
1535 };
1536
1537 #if defined(CONFIG_OF)
1538 static struct omap_gpio_reg_offs omap2_gpio_regs = {
1539 .revision = OMAP24XX_GPIO_REVISION,
1540 .direction = OMAP24XX_GPIO_OE,
1541 .datain = OMAP24XX_GPIO_DATAIN,
1542 .dataout = OMAP24XX_GPIO_DATAOUT,
1543 .set_dataout = OMAP24XX_GPIO_SETDATAOUT,
1544 .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
1545 .irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
1546 .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
1547 .irqenable = OMAP24XX_GPIO_IRQENABLE1,
1548 .irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
1549 .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
1550 .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
1551 .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
1552 .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
1553 .ctrl = OMAP24XX_GPIO_CTRL,
1554 .wkup_en = OMAP24XX_GPIO_WAKE_EN,
1555 .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
1556 .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
1557 .risingdetect = OMAP24XX_GPIO_RISINGDETECT,
1558 .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
1559 };
1560
1561 static struct omap_gpio_reg_offs omap4_gpio_regs = {
1562 .revision = OMAP4_GPIO_REVISION,
1563 .direction = OMAP4_GPIO_OE,
1564 .datain = OMAP4_GPIO_DATAIN,
1565 .dataout = OMAP4_GPIO_DATAOUT,
1566 .set_dataout = OMAP4_GPIO_SETDATAOUT,
1567 .clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
1568 .irqstatus = OMAP4_GPIO_IRQSTATUS0,
1569 .irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
1570 .irqenable = OMAP4_GPIO_IRQSTATUSSET0,
1571 .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
1572 .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
1573 .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
1574 .debounce = OMAP4_GPIO_DEBOUNCINGTIME,
1575 .debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
1576 .ctrl = OMAP4_GPIO_CTRL,
1577 .wkup_en = OMAP4_GPIO_IRQWAKEN0,
1578 .leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
1579 .leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
1580 .risingdetect = OMAP4_GPIO_RISINGDETECT,
1581 .fallingdetect = OMAP4_GPIO_FALLINGDETECT,
1582 };
1583
1584 static const struct omap_gpio_platform_data omap2_pdata = {
1585 .regs = &omap2_gpio_regs,
1586 .bank_width = 32,
1587 .dbck_flag = false,
1588 };
1589
1590 static const struct omap_gpio_platform_data omap3_pdata = {
1591 .regs = &omap2_gpio_regs,
1592 .bank_width = 32,
1593 .dbck_flag = true,
1594 };
1595
1596 static const struct omap_gpio_platform_data omap4_pdata = {
1597 .regs = &omap4_gpio_regs,
1598 .bank_width = 32,
1599 .dbck_flag = true,
1600 };
1601
1602 static const struct of_device_id omap_gpio_match[] = {
1603 {
1604 .compatible = "ti,omap4-gpio",
1605 .data = &omap4_pdata,
1606 },
1607 {
1608 .compatible = "ti,omap3-gpio",
1609 .data = &omap3_pdata,
1610 },
1611 {
1612 .compatible = "ti,omap2-gpio",
1613 .data = &omap2_pdata,
1614 },
1615 { },
1616 };
1617 MODULE_DEVICE_TABLE(of, omap_gpio_match);
1618 #endif
1619
1620 static struct platform_driver omap_gpio_driver = {
1621 .probe = omap_gpio_probe,
1622 .driver = {
1623 .name = "omap_gpio",
1624 .pm = &gpio_pm_ops,
1625 .of_match_table = of_match_ptr(omap_gpio_match),
1626 },
1627 };
1628
1629 /*
1630 * gpio driver register needs to be done before
1631 * machine_init functions access gpio APIs.
1632 * Hence omap_gpio_drv_reg() is a postcore_initcall.
1633 */
1634 static int __init omap_gpio_drv_reg(void)
1635 {
1636 return platform_driver_register(&omap_gpio_driver);
1637 }
1638 postcore_initcall(omap_gpio_drv_reg);
kernel source for telekom puls (alcatel/mediatek)