drivers/cpufreq/speedstep-centrino.c

   1 /*
   2  * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
   3  * M (part of the Centrino chipset).
   4  *
   5  * Since the original Pentium M, most new Intel CPUs support Enhanced
   6  * SpeedStep.
   7  *
   8  * Despite the "SpeedStep" in the name, this is almost entirely unlike
   9  * traditional SpeedStep.
  10  *
  11  * Modelled on speedstep.c
  12  *
  13  * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/init.h>
  19 #include <linux/cpufreq.h>
  20 #include <linux/sched.h>        /* current */
  21 #include <linux/delay.h>
  22 #include <linux/compiler.h>
  23 #include <linux/gfp.h>
  24
  25 #include <asm/msr.h>
  26 #include <asm/processor.h>
  27 #include <asm/cpufeature.h>
  28 #include <asm/cpu_device_id.h>
  29
  30 #define PFX             "speedstep-centrino: "
  31 #define MAINTAINER      "cpufreq@vger.kernel.org"
  32
  33 #define INTEL_MSR_RANGE (0xffff)
  34
  35 struct cpu_id
  36 {
  37         __u8    x86;            /* CPU family */
  38         __u8    x86_model;      /* model */
  39         __u8    x86_mask;       /* stepping */
  40 };
  41
  42 enum {
  43         CPU_BANIAS,
  44         CPU_DOTHAN_A1,
  45         CPU_DOTHAN_A2,
  46         CPU_DOTHAN_B0,
  47         CPU_MP4HT_D0,
  48         CPU_MP4HT_E0,
  49 };
  50
  51 static const struct cpu_id cpu_ids[] = {
  52         [CPU_BANIAS]    = { 6,  9, 5 },
  53         [CPU_DOTHAN_A1] = { 6, 13, 1 },
  54         [CPU_DOTHAN_A2] = { 6, 13, 2 },
  55         [CPU_DOTHAN_B0] = { 6, 13, 6 },
  56         [CPU_MP4HT_D0]  = {15,  3, 4 },
  57         [CPU_MP4HT_E0]  = {15,  4, 1 },
  58 };
  59 #define N_IDS   ARRAY_SIZE(cpu_ids)
  60
  61 struct cpu_model
  62 {
  63         const struct cpu_id *cpu_id;
  64         const char      *model_name;
  65         unsigned        max_freq; /* max clock in kHz */
  66
  67         struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
  68 };
  69 static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
  70                                   const struct cpu_id *x);
  71
  72 /* Operating points for current CPU */
  73 static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
  74 static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
  75
  76 static struct cpufreq_driver centrino_driver;
  77
  78 #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
  79
  80 /* Computes the correct form for IA32_PERF_CTL MSR for a particular
  81    frequency/voltage operating point; frequency in MHz, volts in mV.
  82    This is stored as "index" in the structure. */
  83 #define OP(mhz, mv)                                                     \
  84         {                                                               \
  85                 .frequency = (mhz) * 1000,                              \
  86                 .index = (((mhz)/100) << 8) | ((mv - 700) / 16)         \
  87         }
  88
  89 /*
  90  * These voltage tables were derived from the Intel Pentium M
  91  * datasheet, document 25261202.pdf, Table 5.  I have verified they
  92  * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
  93  * M.
  94  */
  95
  96 /* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
  97 static struct cpufreq_frequency_table banias_900[] =
  98 {
  99         OP(600,  844),
 100         OP(800,  988),
 101         OP(900, 1004),
 102         { .frequency = CPUFREQ_TABLE_END }
 103 };
 104
 105 /* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
 106 static struct cpufreq_frequency_table banias_1000[] =
 107 {
 108         OP(600,   844),
 109         OP(800,   972),
 110         OP(900,   988),
 111         OP(1000, 1004),
 112         { .frequency = CPUFREQ_TABLE_END }
 113 };
 114
 115 /* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
 116 static struct cpufreq_frequency_table banias_1100[] =
 117 {
 118         OP( 600,  956),
 119         OP( 800, 1020),
 120         OP( 900, 1100),
 121         OP(1000, 1164),
 122         OP(1100, 1180),
 123         { .frequency = CPUFREQ_TABLE_END }
 124 };
 125
 126
 127 /* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
 128 static struct cpufreq_frequency_table banias_1200[] =
 129 {
 130         OP( 600,  956),
 131         OP( 800, 1004),
 132         OP( 900, 1020),
 133         OP(1000, 1100),
 134         OP(1100, 1164),
 135         OP(1200, 1180),
 136         { .frequency = CPUFREQ_TABLE_END }
 137 };
 138
 139 /* Intel Pentium M processor 1.30GHz (Banias) */
 140 static struct cpufreq_frequency_table banias_1300[] =
 141 {
 142         OP( 600,  956),
 143         OP( 800, 1260),
 144         OP(1000, 1292),
 145         OP(1200, 1356),
 146         OP(1300, 1388),
 147         { .frequency = CPUFREQ_TABLE_END }
 148 };
 149
 150 /* Intel Pentium M processor 1.40GHz (Banias) */
 151 static struct cpufreq_frequency_table banias_1400[] =
 152 {
 153         OP( 600,  956),
 154         OP( 800, 1180),
 155         OP(1000, 1308),
 156         OP(1200, 1436),
 157         OP(1400, 1484),
 158         { .frequency = CPUFREQ_TABLE_END }
 159 };
 160
 161 /* Intel Pentium M processor 1.50GHz (Banias) */
 162 static struct cpufreq_frequency_table banias_1500[] =
 163 {
 164         OP( 600,  956),
 165         OP( 800, 1116),
 166         OP(1000, 1228),
 167         OP(1200, 1356),
 168         OP(1400, 1452),
 169         OP(1500, 1484),
 170         { .frequency = CPUFREQ_TABLE_END }
 171 };
 172
 173 /* Intel Pentium M processor 1.60GHz (Banias) */
 174 static struct cpufreq_frequency_table banias_1600[] =
 175 {
 176         OP( 600,  956),
 177         OP( 800, 1036),
 178         OP(1000, 1164),
 179         OP(1200, 1276),
 180         OP(1400, 1420),
 181         OP(1600, 1484),
 182         { .frequency = CPUFREQ_TABLE_END }
 183 };
 184
 185 /* Intel Pentium M processor 1.70GHz (Banias) */
 186 static struct cpufreq_frequency_table banias_1700[] =
 187 {
 188         OP( 600,  956),
 189         OP( 800, 1004),
 190         OP(1000, 1116),
 191         OP(1200, 1228),
 192         OP(1400, 1308),
 193         OP(1700, 1484),
 194         { .frequency = CPUFREQ_TABLE_END }
 195 };
 196 #undef OP
 197
 198 #define _BANIAS(cpuid, max, name)       \
 199 {       .cpu_id         = cpuid,        \
 200         .model_name     = "Intel(R) Pentium(R) M processor " name "MHz", \
 201         .max_freq       = (max)*1000,   \
 202         .op_points      = banias_##max, \
 203 }
 204 #define BANIAS(max)     _BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
 205
 206 /* CPU models, their operating frequency range, and freq/voltage
 207    operating points */
 208 static struct cpu_model models[] =
 209 {
 210         _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
 211         BANIAS(1000),
 212         BANIAS(1100),
 213         BANIAS(1200),
 214         BANIAS(1300),
 215         BANIAS(1400),
 216         BANIAS(1500),
 217         BANIAS(1600),
 218         BANIAS(1700),
 219
 220         /* NULL model_name is a wildcard */
 221         { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
 222         { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
 223         { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
 224         { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
 225         { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
 226
 227         { NULL, }
 228 };
 229 #undef _BANIAS
 230 #undef BANIAS
 231
 232 static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 233 {
 234         struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
 235         struct cpu_model *model;
 236
 237         for(model = models; model->cpu_id != NULL; model++)
 238                 if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
 239                     (model->model_name == NULL ||
 240                      strcmp(cpu->x86_model_id, model->model_name) == 0))
 241                         break;
 242
 243         if (model->cpu_id == NULL) {
 244                 /* No match at all */
 245                 pr_debug("no support for CPU model \"%s\": "
 246                        "send /proc/cpuinfo to " MAINTAINER "\n",
 247                        cpu->x86_model_id);
 248                 return -ENOENT;
 249         }
 250
 251         if (model->op_points == NULL) {
 252                 /* Matched a non-match */
 253                 pr_debug("no table support for CPU model \"%s\"\n",
 254                        cpu->x86_model_id);
 255                 pr_debug("try using the acpi-cpufreq driver\n");
 256                 return -ENOENT;
 257         }
 258
 259         per_cpu(centrino_model, policy->cpu) = model;
 260
 261         pr_debug("found \"%s\": max frequency: %dkHz\n",
 262                model->model_name, model->max_freq);
 263
 264         return 0;
 265 }
 266
 267 #else
 268 static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
 269 {
 270         return -ENODEV;
 271 }
 272 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 273
 274 static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
 275                                   const struct cpu_id *x)
 276 {
 277         if ((c->x86 == x->x86) &&
 278             (c->x86_model == x->x86_model) &&
 279             (c->x86_mask == x->x86_mask))
 280                 return 1;
 281         return 0;
 282 }
 283
 284 /* To be called only after centrino_model is initialized */
 285 static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 286 {
 287         int i;
 288
 289         /*
 290          * Extract clock in kHz from PERF_CTL value
 291          * for centrino, as some DSDTs are buggy.
 292          * Ideally, this can be done using the acpi_data structure.
 293          */
 294         if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
 295             (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
 296             (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
 297                 msr = (msr >> 8) & 0xff;
 298                 return msr * 100000;
 299         }
 300
 301         if ((!per_cpu(centrino_model, cpu)) ||
 302             (!per_cpu(centrino_model, cpu)->op_points))
 303                 return 0;
 304
 305         msr &= 0xffff;
 306         for (i = 0;
 307                 per_cpu(centrino_model, cpu)->op_points[i].frequency
 308                                                         != CPUFREQ_TABLE_END;
 309              i++) {
 310                 if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
 311                         return per_cpu(centrino_model, cpu)->
 312                                                         op_points[i].frequency;
 313         }
 314         if (failsafe)
 315                 return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
 316         else
 317                 return 0;
 318 }
 319
 320 /* Return the current CPU frequency in kHz */
 321 static unsigned int get_cur_freq(unsigned int cpu)
 322 {
 323         unsigned l, h;
 324         unsigned clock_freq;
 325
 326         rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
 327         clock_freq = extract_clock(l, cpu, 0);
 328
 329         if (unlikely(clock_freq == 0)) {
 330                 /*
 331                  * On some CPUs, we can see transient MSR values (which are
 332                  * not present in _PSS), while CPU is doing some automatic
 333                  * P-state transition (like TM2). Get the last freq set
 334                  * in PERF_CTL.
 335                  */
 336                 rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
 337                 clock_freq = extract_clock(l, cpu, 1);
 338         }
 339         return clock_freq;
 340 }
 341
 342
 343 static int centrino_cpu_init(struct cpufreq_policy *policy)
 344 {
 345         struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
 346         unsigned freq;
 347         unsigned l, h;
 348         int ret;
 349         int i;
 350
 351         /* Only Intel makes Enhanced Speedstep-capable CPUs */
 352         if (cpu->x86_vendor != X86_VENDOR_INTEL ||
 353             !cpu_has(cpu, X86_FEATURE_EST))
 354                 return -ENODEV;
 355
 356         if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
 357                 centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
 358
 359         if (policy->cpu != 0)
 360                 return -ENODEV;
 361
 362         for (i = 0; i < N_IDS; i++)
 363                 if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
 364                         break;
 365
 366         if (i != N_IDS)
 367                 per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 368
 369         if (!per_cpu(centrino_cpu, policy->cpu)) {
 370                 pr_debug("found unsupported CPU with "
 371                 "Enhanced SpeedStep: send /proc/cpuinfo to "
 372                 MAINTAINER "\n");
 373                 return -ENODEV;
 374         }
 375
 376         if (centrino_cpu_init_table(policy)) {
 377                 return -ENODEV;
 378         }
 379
 380         /* Check to see if Enhanced SpeedStep is enabled, and try to
 381            enable it if not. */
 382         rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 383
 384         if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
 385                 l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
 386                 pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
 387                 wrmsr(MSR_IA32_MISC_ENABLE, l, h);
 388
 389                 /* check to see if it stuck */
 390                 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 391                 if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
 392                         printk(KERN_INFO PFX
 393                                 "couldn't enable Enhanced SpeedStep\n");
 394                         return -ENODEV;
 395                 }
 396         }
 397
 398         freq = get_cur_freq(policy->cpu);
 399         policy->cpuinfo.transition_latency = 10000;
 400                                                 /* 10uS transition latency */
 401         policy->cur = freq;
 402
 403         pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 404
 405         ret = cpufreq_frequency_table_cpuinfo(policy,
 406                 per_cpu(centrino_model, policy->cpu)->op_points);
 407         if (ret)
 408                 return (ret);
 409
 410         cpufreq_frequency_table_get_attr(
 411                 per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 412
 413         return 0;
 414 }
 415
 416 static int centrino_cpu_exit(struct cpufreq_policy *policy)
 417 {
 418         unsigned int cpu = policy->cpu;
 419
 420         if (!per_cpu(centrino_model, cpu))
 421                 return -ENODEV;
 422
 423         cpufreq_frequency_table_put_attr(cpu);
 424
 425         per_cpu(centrino_model, cpu) = NULL;
 426
 427         return 0;
 428 }
 429
 430 /**
 431  * centrino_verify - verifies a new CPUFreq policy
 432  * @policy: new policy
 433  *
 434  * Limit must be within this model's frequency range at least one
 435  * border included.
 436  */
 437 static int centrino_verify (struct cpufreq_policy *policy)
 438 {
 439         return cpufreq_frequency_table_verify(policy,
 440                         per_cpu(centrino_model, policy->cpu)->op_points);
 441 }
 442
 443 /**
 444  * centrino_setpolicy - set a new CPUFreq policy
 445  * @policy: new policy
 446  * @target_freq: the target frequency
 447  * @relation: how that frequency relates to achieved frequency
 448  *      (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
 449  *
 450  * Sets a new CPUFreq policy.
 451  */
 452 static int centrino_target (struct cpufreq_policy *policy,
 453                             unsigned int target_freq,
 454                             unsigned int relation)
 455 {
 456         unsigned int    newstate = 0;
 457         unsigned int    msr, oldmsr = 0, h = 0, cpu = policy->cpu;
 458         struct cpufreq_freqs    freqs;
 459         int                     retval = 0;
 460         unsigned int            j, first_cpu, tmp;
 461         cpumask_var_t covered_cpus;
 462
 463         if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
 464                 return -ENOMEM;
 465
 466         if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
 467                 retval = -ENODEV;
 468                 goto out;
 469         }
 470
 471         if (unlikely(cpufreq_frequency_table_target(policy,
 472                         per_cpu(centrino_model, cpu)->op_points,
 473                         target_freq,
 474                         relation,
 475                         &newstate))) {
 476                 retval = -EINVAL;
 477                 goto out;
 478         }
 479
 480         first_cpu = 1;
 481         for_each_cpu(j, policy->cpus) {
 482                 int good_cpu;
 483
 484                 /*
 485                  * Support for SMP systems.
 486                  * Make sure we are running on CPU that wants to change freq
 487                  */
 488                 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
 489                         good_cpu = cpumask_any_and(policy->cpus,
 490                                                    cpu_online_mask);
 491                 else
 492                         good_cpu = j;
 493
 494                 if (good_cpu >= nr_cpu_ids) {
 495                         pr_debug("couldn't limit to CPUs in this domain\n");
 496                         retval = -EAGAIN;
 497                         if (first_cpu) {
 498                                 /* We haven't started the transition yet. */
 499                                 goto out;
 500                         }
 501                         break;
 502                 }
 503
 504                 msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 505
 506                 if (first_cpu) {
 507                         rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
 508                         if (msr == (oldmsr & 0xffff)) {
 509                                 pr_debug("no change needed - msr was and needs "
 510                                         "to be %x\n", oldmsr);
 511                                 retval = 0;
 512                                 goto out;
 513                         }
 514
 515                         freqs.old = extract_clock(oldmsr, cpu, 0);
 516                         freqs.new = extract_clock(msr, cpu, 0);
 517
 518                         pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
 519                                 target_freq, freqs.old, freqs.new, msr);
 520
 521                         cpufreq_notify_transition(policy, &freqs,
 522                                         CPUFREQ_PRECHANGE);
 523
 524                         first_cpu = 0;
 525                         /* all but 16 LSB are reserved, treat them with care */
 526                         oldmsr &= ~0xffff;
 527                         msr &= 0xffff;
 528                         oldmsr |= msr;
 529                 }
 530
 531                 wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
 532                 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
 533                         break;
 534
 535                 cpumask_set_cpu(j, covered_cpus);
 536         }
 537
 538         cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 539
 540         if (unlikely(retval)) {
 541                 /*
 542                  * We have failed halfway through the frequency change.
 543                  * We have sent callbacks to policy->cpus and
 544                  * MSRs have already been written on coverd_cpus.
 545                  * Best effort undo..
 546                  */
 547
 548                 for_each_cpu(j, covered_cpus)
 549                         wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
 550
 551                 tmp = freqs.new;
 552                 freqs.new = freqs.old;
 553                 freqs.old = tmp;
 554                 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 555                 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 556         }
 557         retval = 0;
 558
 559 out:
 560         free_cpumask_var(covered_cpus);
 561         return retval;
 562 }
 563
 564 static struct freq_attr* centrino_attr[] = {
 565         &cpufreq_freq_attr_scaling_available_freqs,
 566         NULL,
 567 };
 568
 569 static struct cpufreq_driver centrino_driver = {
 570         .name           = "centrino", /* should be speedstep-centrino,
 571                                          but there's a 16 char limit */
 572         .init           = centrino_cpu_init,
 573         .exit           = centrino_cpu_exit,
 574         .verify         = centrino_verify,
 575         .target         = centrino_target,
 576         .get            = get_cur_freq,
 577         .attr           = centrino_attr,
 578         .owner          = THIS_MODULE,
 579 };
 580
 581 /*
 582  * This doesn't replace the detailed checks above because
 583  * the generic CPU IDs don't have a way to match for steppings
 584  * or ASCII model IDs.
 585  */
 586 static const struct x86_cpu_id centrino_ids[] = {
 587         { X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST },
 588         { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
 589         { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
 590         { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
 591         { X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST },
 592         { X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST },
 593         {}
 594 };
 595 #if 0
 596 /* Autoload or not? Do not for now. */
 597 MODULE_DEVICE_TABLE(x86cpu, centrino_ids);
 598 #endif
 599
 600 /**
 601  * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
 602  *
 603  * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
 604  * unsupported devices, -ENOENT if there's no voltage table for this
 605  * particular CPU model, -EINVAL on problems during initiatization,
 606  * and zero on success.
 607  *
 608  * This is quite picky.  Not only does the CPU have to advertise the
 609  * "est" flag in the cpuid capability flags, we look for a specific
 610  * CPU model and stepping, and we need to have the exact model name in
 611  * our voltage tables.  That is, be paranoid about not releasing
 612  * someone's valuable magic smoke.
 613  */
 614 static int __init centrino_init(void)
 615 {
 616         if (!x86_match_cpu(centrino_ids))
 617                 return -ENODEV;
 618         return cpufreq_register_driver(&centrino_driver);
 619 }
 620
 621 static void __exit centrino_exit(void)
 622 {
 623         cpufreq_unregister_driver(&centrino_driver);
 624 }
 625
 626 MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
 627 MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
 628 MODULE_LICENSE ("GPL");
 629
 630 late_initcall(centrino_init);
 631 module_exit(centrino_exit);