drivers/char/Kconfig

   1 #
   2 # Character device configuration
   3 #
   4
   5 menu "Character devices"
   6
   7 source "drivers/tty/Kconfig"
   8
   9 config DEVKMEM
  10         bool "/dev/kmem virtual device support"
  11         default y
  12         help
  13           Say Y here if you want to support the /dev/kmem device. The
  14           /dev/kmem device is rarely used, but can be used for certain
  15           kind of kernel debugging operations.
  16           When in doubt, say "N".
  17
  18 config STALDRV
  19         bool "Stallion multiport serial support"
  20         depends on SERIAL_NONSTANDARD
  21         help
  22           Stallion cards give you many serial ports.  You would need something
  23           like this to connect more than two modems to your Linux box, for
  24           instance in order to become a dial-in server.  If you say Y here,
  25           you will be asked for your specific card model in the next
  26           questions.  Make sure to read <file:Documentation/serial/stallion.txt>
  27           in this case.  If you have never heard about all this, it's safe to
  28           say N.
  29
  30 config SGI_SNSC
  31         bool "SGI Altix system controller communication support"
  32         depends on (IA64_SGI_SN2 || IA64_GENERIC)
  33         help
  34           If you have an SGI Altix and you want to enable system
  35           controller communication from user space (you want this!),
  36           say Y.  Otherwise, say N.
  37
  38 config SGI_TIOCX
  39        bool "SGI TIO CX driver support"
  40        depends on (IA64_SGI_SN2 || IA64_GENERIC)
  41        help
  42          If you have an SGI Altix and you have fpga devices attached
  43          to your TIO, say Y here, otherwise say N.
  44
  45 config SGI_MBCS
  46        tristate "SGI FPGA Core Services driver support"
  47        depends on SGI_TIOCX
  48        help
  49          If you have an SGI Altix with an attached SABrick
  50          say Y or M here, otherwise say N.
  51
  52 source "drivers/tty/serial/Kconfig"
  53
  54 config TTY_PRINTK
  55         bool "TTY driver to output user messages via printk"
  56         depends on EXPERT && TTY
  57         default n
  58         ---help---
  59           If you say Y here, the support for writing user messages (i.e.
  60           console messages) via printk is available.
  61
  62           The feature is useful to inline user messages with kernel
  63           messages.
  64           In order to use this feature, you should output user messages
  65           to /dev/ttyprintk or redirect console to this TTY.
  66
  67           If unsure, say N.
  68
  69 config BFIN_OTP
  70         tristate "Blackfin On-Chip OTP Memory Support"
  71         depends on BLACKFIN && (BF51x || BF52x || BF54x)
  72         default y
  73         help
  74           If you say Y here, you will get support for a character device
  75           interface into the One Time Programmable memory pages that are
  76           stored on the Blackfin processor.  This will not get you access
  77           to the secure memory pages however.  You will need to write your
  78           own secure code and reader for that.
  79
  80           To compile this driver as a module, choose M here: the module
  81           will be called bfin-otp.
  82
  83           If unsure, it is safe to say Y.
  84
  85 config BFIN_OTP_WRITE_ENABLE
  86         bool "Enable writing support of OTP pages"
  87         depends on BFIN_OTP
  88         default n
  89         help
  90           If you say Y here, you will enable support for writing of the
  91           OTP pages.  This is dangerous by nature as you can only program
  92           the pages once, so only enable this option when you actually
  93           need it so as to not inadvertently clobber data.
  94
  95           If unsure, say N.
  96
  97 config PRINTER
  98         tristate "Parallel printer support"
  99         depends on PARPORT
 100         ---help---
 101           If you intend to attach a printer to the parallel port of your Linux
 102           box (as opposed to using a serial printer; if the connector at the
 103           printer has 9 or 25 holes ["female"], then it's serial), say Y.
 104           Also read the Printing-HOWTO, available from
 105           <http://www.tldp.org/docs.html#howto>.
 106
 107           It is possible to share one parallel port among several devices
 108           (e.g. printer and ZIP drive) and it is safe to compile the
 109           corresponding drivers into the kernel.
 110
 111           To compile this driver as a module, choose M here and read
 112           <file:Documentation/parport.txt>.  The module will be called lp.
 113
 114           If you have several parallel ports, you can specify which ports to
 115           use with the "lp" kernel command line option.  (Try "man bootparam"
 116           or see the documentation of your boot loader (lilo or loadlin) about
 117           how to pass options to the kernel at boot time.)  The syntax of the
 118           "lp" command line option can be found in <file:drivers/char/lp.c>.
 119
 120           If you have more than 8 printers, you need to increase the LP_NO
 121           macro in lp.c and the PARPORT_MAX macro in parport.h.
 122
 123 config LP_CONSOLE
 124         bool "Support for console on line printer"
 125         depends on PRINTER
 126         ---help---
 127           If you want kernel messages to be printed out as they occur, you
 128           can have a console on the printer. This option adds support for
 129           doing that; to actually get it to happen you need to pass the
 130           option "console=lp0" to the kernel at boot time.
 131
 132           If the printer is out of paper (or off, or unplugged, or too
 133           busy..) the kernel will stall until the printer is ready again.
 134           By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
 135           can make the kernel continue when this happens,
 136           but it'll lose the kernel messages.
 137
 138           If unsure, say N.
 139
 140 config PPDEV
 141         tristate "Support for user-space parallel port device drivers"
 142         depends on PARPORT
 143         ---help---
 144           Saying Y to this adds support for /dev/parport device nodes.  This
 145           is needed for programs that want portable access to the parallel
 146           port, for instance deviceid (which displays Plug-and-Play device
 147           IDs).
 148
 149           This is the parallel port equivalent of SCSI generic support (sg).
 150           It is safe to say N to this -- it is not needed for normal printing
 151           or parallel port CD-ROM/disk support.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called ppdev.
 155
 156           If unsure, say N.
 157
 158 source "drivers/tty/hvc/Kconfig"
 159
 160 config VIRTIO_CONSOLE
 161         tristate "Virtio console"
 162         depends on VIRTIO && TTY
 163         select HVC_DRIVER
 164         help
 165           Virtio console for use with lguest and other hypervisors.
 166
 167           Also serves as a general-purpose serial device for data
 168           transfer between the guest and host.  Character devices at
 169           /dev/vportNpn will be created when corresponding ports are
 170           found, where N is the device number and n is the port number
 171           within that device.  If specified by the host, a sysfs
 172           attribute called 'name' will be populated with a name for
 173           the port which can be used by udev scripts to create a
 174           symlink to the device.
 175
 176 config IBM_BSR
 177         tristate "IBM POWER Barrier Synchronization Register support"
 178         depends on PPC_PSERIES
 179         help
 180           This devices exposes a hardware mechanism for fast synchronization
 181           of threads across a large system which avoids bouncing a cacheline
 182           between several cores on a system
 183
 184 source "drivers/char/ipmi/Kconfig"
 185
 186 config DS1620
 187         tristate "NetWinder thermometer support"
 188         depends on ARCH_NETWINDER
 189         help
 190           Say Y here to include support for the thermal management hardware
 191           found in the NetWinder. This driver allows the user to control the
 192           temperature set points and to read the current temperature.
 193
 194           It is also possible to say M here to build it as a module (ds1620)
 195           It is recommended to be used on a NetWinder, but it is not a
 196           necessity.
 197
 198 config NWBUTTON
 199         tristate "NetWinder Button"
 200         depends on ARCH_NETWINDER
 201         ---help---
 202           If you say Y here and create a character device node /dev/nwbutton
 203           with major and minor numbers 10 and 158 ("man mknod"), then every
 204           time the orange button is pressed a number of times, the number of
 205           times the button was pressed will be written to that device.
 206
 207           This is most useful for applications, as yet unwritten, which
 208           perform actions based on how many times the button is pressed in a
 209           row.
 210
 211           Do not hold the button down for too long, as the driver does not
 212           alter the behaviour of the hardware reset circuitry attached to the
 213           button; it will still execute a hard reset if the button is held
 214           down for longer than approximately five seconds.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called nwbutton.
 218
 219           Most people will answer Y to this question and "Reboot Using Button"
 220           below to be able to initiate a system shutdown from the button.
 221
 222 config NWBUTTON_REBOOT
 223         bool "Reboot Using Button"
 224         depends on NWBUTTON
 225         help
 226           If you say Y here, then you will be able to initiate a system
 227           shutdown and reboot by pressing the orange button a number of times.
 228           The number of presses to initiate the shutdown is two by default,
 229           but this can be altered by modifying the value of NUM_PRESSES_REBOOT
 230           in nwbutton.h and recompiling the driver or, if you compile the
 231           driver as a module, you can specify the number of presses at load
 232           time with "insmod button reboot_count=<something>".
 233
 234 config NWFLASH
 235         tristate "NetWinder flash support"
 236         depends on ARCH_NETWINDER
 237         ---help---
 238           If you say Y here and create a character device /dev/flash with
 239           major 10 and minor 160 you can manipulate the flash ROM containing
 240           the NetWinder firmware. Be careful as accidentally overwriting the
 241           flash contents can render your computer unbootable. On no account
 242           allow random users access to this device. :-)
 243
 244           To compile this driver as a module, choose M here: the
 245           module will be called nwflash.
 246
 247           If you're not sure, say N.
 248
 249 source "drivers/char/hw_random/Kconfig"
 250
 251 config NVRAM
 252         tristate "/dev/nvram support"
 253         depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
 254         ---help---
 255           If you say Y here and create a character special file /dev/nvram
 256           with major number 10 and minor number 144 using mknod ("man mknod"),
 257           you get read and write access to the extra bytes of non-volatile
 258           memory in the real time clock (RTC), which is contained in every PC
 259           and most Ataris.  The actual number of bytes varies, depending on the
 260           nvram in the system, but is usually 114 (128-14 for the RTC).
 261
 262           This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
 263           on Ataris. /dev/nvram may be used to view settings there, or to
 264           change them (with some utility). It could also be used to frequently
 265           save a few bits of very important data that may not be lost over
 266           power-off and for which writing to disk is too insecure. Note
 267           however that most NVRAM space in a PC belongs to the BIOS and you
 268           should NEVER idly tamper with it. See Ralf Brown's interrupt list
 269           for a guide to the use of CMOS bytes by your BIOS.
 270
 271           On Atari machines, /dev/nvram is always configured and does not need
 272           to be selected.
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called nvram.
 276
 277 #
 278 # These legacy RTC drivers just cause too many conflicts with the generic
 279 # RTC framework ... let's not even try to coexist any more.
 280 #
 281 if RTC_LIB=n
 282
 283 config RTC
 284         tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
 285         depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
 286                         && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML
 287         ---help---
 288           If you say Y here and create a character special file /dev/rtc with
 289           major number 10 and minor number 135 using mknod ("man mknod"), you
 290           will get access to the real time clock (or hardware clock) built
 291           into your computer.
 292
 293           Every PC has such a clock built in. It can be used to generate
 294           signals from as low as 1Hz up to 8192Hz, and can also be used
 295           as a 24 hour alarm. It reports status information via the file
 296           /proc/driver/rtc and its behaviour is set by various ioctls on
 297           /dev/rtc.
 298
 299           If you run Linux on a multiprocessor machine and said Y to
 300           "Symmetric Multi Processing" above, you should say Y here to read
 301           and set the RTC in an SMP compatible fashion.
 302
 303           If you think you have a use for such a device (such as periodic data
 304           sampling), then say Y here, and read <file:Documentation/rtc.txt>
 305           for details.
 306
 307           To compile this driver as a module, choose M here: the
 308           module will be called rtc.
 309
 310 config JS_RTC
 311         tristate "Enhanced Real Time Clock Support"
 312         depends on SPARC32 && PCI
 313         ---help---
 314           If you say Y here and create a character special file /dev/rtc with
 315           major number 10 and minor number 135 using mknod ("man mknod"), you
 316           will get access to the real time clock (or hardware clock) built
 317           into your computer.
 318
 319           Every PC has such a clock built in. It can be used to generate
 320           signals from as low as 1Hz up to 8192Hz, and can also be used
 321           as a 24 hour alarm. It reports status information via the file
 322           /proc/driver/rtc and its behaviour is set by various ioctls on
 323           /dev/rtc.
 324
 325           If you think you have a use for such a device (such as periodic data
 326           sampling), then say Y here, and read <file:Documentation/rtc.txt>
 327           for details.
 328
 329           To compile this driver as a module, choose M here: the
 330           module will be called js-rtc.
 331
 332 config GEN_RTC
 333         tristate "Generic /dev/rtc emulation"
 334         depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML
 335         ---help---
 336           If you say Y here and create a character special file /dev/rtc with
 337           major number 10 and minor number 135 using mknod ("man mknod"), you
 338           will get access to the real time clock (or hardware clock) built
 339           into your computer.
 340
 341           It reports status information via the file /proc/driver/rtc and its
 342           behaviour is set by various ioctls on /dev/rtc. If you enable the
 343           "extended RTC operation" below it will also provide an emulation
 344           for RTC_UIE which is required by some programs and may improve
 345           precision in some cases.
 346
 347           To compile this driver as a module, choose M here: the
 348           module will be called genrtc.
 349
 350 config GEN_RTC_X
 351         bool "Extended RTC operation"
 352         depends on GEN_RTC
 353         help
 354           Provides an emulation for RTC_UIE which is required by some programs
 355           and may improve precision of the generic RTC support in some cases.
 356
 357 config EFI_RTC
 358         bool "EFI Real Time Clock Services"
 359         depends on IA64
 360
 361 config DS1302
 362         tristate "DS1302 RTC support"
 363         depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
 364         help
 365           If you say Y here and create a character special file /dev/rtc with
 366           major number 121 and minor number 0 using mknod ("man mknod"), you
 367           will get access to the real time clock (or hardware clock) built
 368           into your computer.
 369
 370 endif # RTC_LIB
 371
 372 config DTLK
 373         tristate "Double Talk PC internal speech card support"
 374         depends on ISA
 375         help
 376           This driver is for the DoubleTalk PC, a speech synthesizer
 377           manufactured by RC Systems (<http://www.rcsys.com/>).  It is also
 378           called the `internal DoubleTalk'.
 379
 380           To compile this driver as a module, choose M here: the
 381           module will be called dtlk.
 382
 383 config XILINX_HWICAP
 384         tristate "Xilinx HWICAP Support"
 385         depends on XILINX_VIRTEX || MICROBLAZE
 386         help
 387           This option enables support for Xilinx Internal Configuration
 388           Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
 389           FPGA platforms to partially reconfigure the FPGA at runtime.
 390
 391           If unsure, say N.
 392
 393 config R3964
 394         tristate "Siemens R3964 line discipline"
 395         depends on TTY
 396         ---help---
 397           This driver allows synchronous communication with devices using the
 398           Siemens R3964 packet protocol. Unless you are dealing with special
 399           hardware like PLCs, you are unlikely to need this.
 400
 401           To compile this driver as a module, choose M here: the
 402           module will be called n_r3964.
 403
 404           If unsure, say N.
 405
 406 config APPLICOM
 407         tristate "Applicom intelligent fieldbus card support"
 408         depends on PCI
 409         ---help---
 410           This driver provides the kernel-side support for the intelligent
 411           fieldbus cards made by Applicom International. More information
 412           about these cards can be found on the WWW at the address
 413           <http://www.applicom-int.com/>, or by email from David Woodhouse
 414           <dwmw2@infradead.org>.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called applicom.
 418
 419           If unsure, say N.
 420
 421 config SONYPI
 422         tristate "Sony Vaio Programmable I/O Control Device support"
 423         depends on X86 && PCI && INPUT && !64BIT
 424         ---help---
 425           This driver enables access to the Sony Programmable I/O Control
 426           Device which can be found in many (all ?) Sony Vaio laptops.
 427
 428           If you have one of those laptops, read
 429           <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called sonypi.
 433
 434 config GPIO_TB0219
 435         tristate "TANBAC TB0219 GPIO support"
 436         depends on TANBAC_TB022X
 437         select GPIO_VR41XX
 438
 439 source "drivers/char/pcmcia/Kconfig"
 440
 441 config MWAVE
 442         tristate "ACP Modem (Mwave) support"
 443         depends on X86 && TTY
 444         select SERIAL_8250
 445         ---help---
 446           The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
 447           kernel driver and a user level application. Together these components
 448           support direct attachment to public switched telephone networks (PSTNs)
 449           and support selected world wide countries.
 450
 451           This version of the ACP Modem driver supports the IBM Thinkpad 600E,
 452           600, and 770 that include on board ACP modem hardware.
 453
 454           The modem also supports the standard communications port interface
 455           (ttySx) and is compatible with the Hayes AT Command Set.
 456
 457           The user level application needed to use this driver can be found at
 458           the IBM Linux Technology Center (LTC) web site:
 459           <http://www.ibm.com/linux/ltc/>.
 460
 461           If you own one of the above IBM Thinkpads which has the Mwave chipset
 462           in it, say Y.
 463
 464           To compile this driver as a module, choose M here: the
 465           module will be called mwave.
 466
 467 config SCx200_GPIO
 468         tristate "NatSemi SCx200 GPIO Support"
 469         depends on SCx200
 470         select NSC_GPIO
 471         help
 472           Give userspace access to the GPIO pins on the National
 473           Semiconductor SCx200 processors.
 474
 475           If compiled as a module, it will be called scx200_gpio.
 476
 477 config PC8736x_GPIO
 478         tristate "NatSemi PC8736x GPIO Support"
 479         depends on X86_32 && !UML
 480         default SCx200_GPIO     # mostly N
 481         select NSC_GPIO         # needed for support routines
 482         help
 483           Give userspace access to the GPIO pins on the National
 484           Semiconductor PC-8736x (x=[03456]) SuperIO chip.  The chip
 485           has multiple functional units, inc several managed by
 486           hwmon/pc87360 driver.  Tested with PC-87366
 487
 488           If compiled as a module, it will be called pc8736x_gpio.
 489
 490 config NSC_GPIO
 491         tristate "NatSemi Base GPIO Support"
 492         depends on X86_32
 493         # selected by SCx200_GPIO and PC8736x_GPIO
 494         # what about 2 selectors differing: m != y
 495         help
 496           Common support used (and needed) by scx200_gpio and
 497           pc8736x_gpio drivers.  If those drivers are built as
 498           modules, this one will be too, named nsc_gpio
 499
 500 config RAW_DRIVER
 501         tristate "RAW driver (/dev/raw/rawN)"
 502         depends on BLOCK
 503         help
 504           The raw driver permits block devices to be bound to /dev/raw/rawN.
 505           Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
 506           See the raw(8) manpage for more details.
 507
 508           Applications should preferably open the device (eg /dev/hda1)
 509           with the O_DIRECT flag.
 510
 511 config MAX_RAW_DEVS
 512         int "Maximum number of RAW devices to support (1-65536)"
 513         depends on RAW_DRIVER
 514         default "256"
 515         help
 516           The maximum number of RAW devices that are supported.
 517           Default is 256. Increase this number in case you need lots of
 518           raw devices.
 519
 520 config HPET
 521         bool "HPET - High Precision Event Timer" if (X86 || IA64)
 522         default n
 523         depends on ACPI
 524         help
 525           If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
 526           open selects one of the timers supported by the HPET.  The timers are
 527           non-periodic and/or periodic.
 528
 529 config HPET_MMAP
 530         bool "Allow mmap of HPET"
 531         default y
 532         depends on HPET
 533         help
 534           If you say Y here, user applications will be able to mmap
 535           the HPET registers.
 536
 537           In some hardware implementations, the page containing HPET
 538           registers may also contain other things that shouldn't be
 539           exposed to the user.  If this applies to your hardware,
 540           say N here.
 541
 542 config HANGCHECK_TIMER
 543         tristate "Hangcheck timer"
 544         depends on X86 || IA64 || PPC64 || S390
 545         help
 546           The hangcheck-timer module detects when the system has gone
 547           out to lunch past a certain margin.  It can reboot the system
 548           or merely print a warning.
 549
 550 config MMTIMER
 551         tristate "MMTIMER Memory mapped RTC for SGI Altix"
 552         depends on IA64_GENERIC || IA64_SGI_SN2
 553         default y
 554         help
 555           The mmtimer device allows direct userspace access to the
 556           Altix system timer.
 557
 558 config UV_MMTIMER
 559         tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
 560         depends on X86_UV
 561         default m
 562         help
 563           The uv_mmtimer device allows direct userspace access to the
 564           UV system timer.
 565
 566 source "drivers/char/tpm/Kconfig"
 567
 568 config TELCLOCK
 569         tristate "Telecom clock driver for ATCA SBC"
 570         depends on X86
 571         default n
 572         help
 573           The telecom clock device is specific to the MPCBL0010 and MPCBL0050
 574           ATCA computers and allows direct userspace access to the
 575           configuration of the telecom clock configuration settings.  This
 576           device is used for hardware synchronization across the ATCA backplane
 577           fabric.  Upon loading, the driver exports a sysfs directory,
 578           /sys/devices/platform/telco_clock, with a number of files for
 579           controlling the behavior of this hardware.
 580
 581 config DEVPORT
 582         bool "/dev/port character device"
 583         depends on ISA || PCI
 584         default y
 585         help
 586           Say Y here if you want to support the /dev/port device. The /dev/port
 587           device is similar to /dev/mem, but for I/O ports.
 588
 589 source "drivers/s390/char/Kconfig"
 590
 591 config MSM_SMD_PKT
 592         bool "Enable device interface for some SMD packet ports"
 593         default n
 594         depends on MSM_SMD
 595         help
 596           Enables userspace clients to read and write to some packet SMD
 597           ports via device interface for MSM chipset.
 598
 599 config TILE_SROM
 600         bool "Character-device access via hypervisor to the Tilera SPI ROM"
 601         depends on TILE
 602         default y
 603         ---help---
 604           This device provides character-level read-write access
 605           to the SROM, typically via the "0", "1", and "2" devices
 606           in /dev/srom/.  The Tilera hypervisor makes the flash
 607           device appear much like a simple EEPROM, and knows
 608           how to partition a single ROM for multiple purposes.
 609
 610 endmenu
 611