drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config SATA_FSL
 101         tristate "Freescale 3.0Gbps SATA support"
 102         depends on FSL_SOC
 103         help
 104           This option enables support for Freescale 3.0Gbps SATA controller.
 105           It can be found on MPC837x and MPC8315.
 106
 107           If unsure, say N.
 108
 109 config SATA_INIC162X
 110         tristate "Initio 162x SATA support (Very Experimental)"
 111         depends on PCI
 112         help
 113           This option enables support for Initio 162x Serial ATA.
 114
 115 config SATA_ACARD_AHCI
 116         tristate "ACard AHCI variant (ATP 8620)"
 117         depends on PCI
 118         help
 119           This option enables support for Acard.
 120
 121           If unsure, say N.
 122
 123 config SATA_SIL24
 124         tristate "Silicon Image 3124/3132 SATA support"
 125         depends on PCI
 126         help
 127           This option enables support for Silicon Image 3124/3132 Serial ATA.
 128
 129           If unsure, say N.
 130
 131 config ATA_SFF
 132         bool "ATA SFF support (for legacy IDE and PATA)"
 133         default y
 134         help
 135           This option adds support for ATA controllers with SFF
 136           compliant or similar programming interface.
 137
 138           SFF is the legacy IDE interface that has been around since
 139           the dawn of time.  Almost all PATA controllers have an
 140           SFF interface.  Many SATA controllers have an SFF interface
 141           when configured into a legacy compatibility mode.
 142
 143           For users with exclusively modern controllers like AHCI,
 144           Silicon Image 3124, or Marvell 6440, you may choose to
 145           disable this unneeded SFF support.
 146
 147           If unsure, say Y.
 148
 149 if ATA_SFF
 150
 151 comment "SFF controllers with custom DMA interface"
 152
 153 config PDC_ADMA
 154         tristate "Pacific Digital ADMA support"
 155         depends on PCI
 156         help
 157           This option enables support for Pacific Digital ADMA controllers
 158
 159           If unsure, say N.
 160
 161 config PATA_OCTEON_CF
 162         tristate "OCTEON Boot Bus Compact Flash support"
 163         depends on CPU_CAVIUM_OCTEON
 164         help
 165           This option enables a polled compact flash driver for use with
 166           compact flash cards attached to the OCTEON boot bus.
 167
 168           If unsure, say N.
 169
 170 config SATA_QSTOR
 171         tristate "Pacific Digital SATA QStor support"
 172         depends on PCI
 173         help
 174           This option enables support for Pacific Digital Serial ATA QStor.
 175
 176           If unsure, say N.
 177
 178 config SATA_SX4
 179         tristate "Promise SATA SX4 support (Experimental)"
 180         depends on PCI
 181         help
 182           This option enables support for Promise Serial ATA SX4.
 183
 184           If unsure, say N.
 185
 186 config ATA_BMDMA
 187         bool "ATA BMDMA support"
 188         default y
 189         help
 190           This option adds support for SFF ATA controllers with BMDMA
 191           capability.  BMDMA stands for bus-master DMA and is the
 192           de facto DMA interface for SFF controllers.
 193
 194           If unsure, say Y.
 195
 196 if ATA_BMDMA
 197
 198 comment "SATA SFF controllers with BMDMA"
 199
 200 config ATA_PIIX
 201         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 202         depends on PCI
 203         help
 204           This option enables support for ICH5/6/7/8 Serial ATA
 205           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 206           host controllers.
 207
 208           If unsure, say N.
 209
 210 config SATA_DWC
 211         tristate "DesignWare Cores SATA support"
 212         depends on 460EX
 213         help
 214           This option enables support for the on-chip SATA controller of the
 215           AppliedMicro processor 460EX.
 216
 217           If unsure, say N.
 218
 219 config SATA_DWC_DEBUG
 220         bool "Debugging driver version"
 221         depends on SATA_DWC
 222         help
 223           This option enables debugging output in the driver.
 224
 225 config SATA_DWC_VDEBUG
 226         bool "Verbose debug output"
 227         depends on SATA_DWC_DEBUG
 228         help
 229           This option enables the taskfile dumping and NCQ debugging.
 230
 231 config SATA_HIGHBANK
 232         tristate "Calxeda Highbank SATA support"
 233         help
 234           This option enables support for the Calxeda Highbank SoC's
 235           onboard SATA.
 236
 237           If unsure, say N.
 238
 239 config SATA_MV
 240         tristate "Marvell SATA support"
 241         help
 242           This option enables support for the Marvell Serial ATA family.
 243           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 244           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 245
 246           If unsure, say N.
 247
 248 config SATA_NV
 249         tristate "NVIDIA SATA support"
 250         depends on PCI
 251         help
 252           This option enables support for NVIDIA Serial ATA.
 253
 254           If unsure, say N.
 255
 256 config SATA_PROMISE
 257         tristate "Promise SATA TX2/TX4 support"
 258         depends on PCI
 259         help
 260           This option enables support for Promise Serial ATA TX2/TX4.
 261
 262           If unsure, say N.
 263
 264 config SATA_RCAR
 265         tristate "Renesas R-Car SATA support"
 266         depends on ARCH_SHMOBILE && ARCH_R8A7779
 267         help
 268           This option enables support for Renesas R-Car Serial ATA.
 269
 270           If unsure, say N.
 271
 272 config SATA_SIL
 273         tristate "Silicon Image SATA support"
 274         depends on PCI
 275         help
 276           This option enables support for Silicon Image Serial ATA.
 277
 278           If unsure, say N.
 279
 280 config SATA_SIS
 281         tristate "SiS 964/965/966/180 SATA support"
 282         depends on PCI
 283         select PATA_SIS
 284         help
 285           This option enables support for SiS Serial ATA on
 286           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 287           The PATA support for SiS 180 requires additionally to
 288           enable the PATA_SIS driver in the config.
 289           If unsure, say N.
 290
 291 config SATA_SVW
 292         tristate "ServerWorks Frodo / Apple K2 SATA support"
 293         depends on PCI
 294         help
 295           This option enables support for Broadcom/Serverworks/Apple K2
 296           SATA support.
 297
 298           If unsure, say N.
 299
 300 config SATA_ULI
 301         tristate "ULi Electronics SATA support"
 302         depends on PCI
 303         help
 304           This option enables support for ULi Electronics SATA.
 305
 306           If unsure, say N.
 307
 308 config SATA_VIA
 309         tristate "VIA SATA support"
 310         depends on PCI
 311         help
 312           This option enables support for VIA Serial ATA.
 313
 314           If unsure, say N.
 315
 316 config SATA_VITESSE
 317         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 318         depends on PCI
 319         help
 320           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 321
 322           If unsure, say N.
 323
 324 comment "PATA SFF controllers with BMDMA"
 325
 326 config PATA_ALI
 327         tristate "ALi PATA support"
 328         depends on PCI
 329         help
 330           This option enables support for the ALi ATA interfaces
 331           found on the many ALi chipsets.
 332
 333           If unsure, say N.
 334
 335 config PATA_AMD
 336         tristate "AMD/NVidia PATA support"
 337         depends on PCI
 338         help
 339           This option enables support for the AMD and NVidia PATA
 340           interfaces found on the chipsets for Athlon/Athlon64.
 341
 342           If unsure, say N.
 343
 344 config PATA_ARASAN_CF
 345         tristate "ARASAN CompactFlash PATA Controller Support"
 346         depends on DMADEVICES
 347         select DMA_ENGINE
 348         help
 349           Say Y here to support the ARASAN CompactFlash PATA controller
 350
 351 config PATA_ARTOP
 352         tristate "ARTOP 6210/6260 PATA support"
 353         depends on PCI
 354         help
 355           This option enables support for ARTOP PATA controllers.
 356
 357           If unsure, say N.
 358
 359 config PATA_ATIIXP
 360         tristate "ATI PATA support"
 361         depends on PCI
 362         help
 363           This option enables support for the ATI ATA interfaces
 364           found on the many ATI chipsets.
 365
 366           If unsure, say N.
 367
 368 config PATA_ATP867X
 369         tristate "ARTOP/Acard ATP867X PATA support"
 370         depends on PCI
 371         help
 372           This option enables support for ARTOP/Acard ATP867X PATA
 373           controllers.
 374
 375           If unsure, say N.
 376
 377 config PATA_BF54X
 378         tristate "Blackfin 54x ATAPI support"
 379         depends on BF542 || BF548 || BF549
 380         help
 381           This option enables support for the built-in ATAPI controller on
 382           Blackfin 54x family chips.
 383
 384           If unsure, say N.
 385
 386 config PATA_CMD64X
 387         tristate "CMD64x PATA support"
 388         depends on PCI
 389         help
 390           This option enables support for the CMD64x series chips
 391           except for the CMD640.
 392
 393           If unsure, say N.
 394
 395 config PATA_CS5520
 396         tristate "CS5510/5520 PATA support"
 397         depends on PCI
 398         help
 399           This option enables support for the Cyrix 5510/5520
 400           companion chip used with the MediaGX/Geode processor family.
 401
 402           If unsure, say N.
 403
 404 config PATA_CS5530
 405         tristate "CS5530 PATA support"
 406         depends on PCI
 407         help
 408           This option enables support for the Cyrix/NatSemi/AMD CS5530
 409           companion chip used with the MediaGX/Geode processor family.
 410
 411           If unsure, say N.
 412
 413 config PATA_CS5535
 414         tristate "CS5535 PATA support (Experimental)"
 415         depends on PCI && X86 && !X86_64
 416         help
 417           This option enables support for the NatSemi/AMD CS5535
 418           companion chip used with the Geode processor family.
 419
 420           If unsure, say N.
 421
 422 config PATA_CS5536
 423         tristate "CS5536 PATA support"
 424         depends on PCI
 425         help
 426           This option enables support for the AMD CS5536
 427           companion chip used with the Geode LX processor family.
 428
 429           If unsure, say N.
 430
 431 config PATA_CYPRESS
 432         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 433         depends on PCI
 434         help
 435           This option enables support for the Cypress/Contaq CY82C693
 436           chipset found in some Alpha systems
 437
 438           If unsure, say N.
 439
 440 config PATA_EFAR
 441         tristate "EFAR SLC90E66 support"
 442         depends on PCI
 443         help
 444           This option enables support for the EFAR SLC90E66
 445           IDE controller found on some older machines.
 446
 447           If unsure, say N.
 448
 449 config PATA_EP93XX
 450         tristate "Cirrus Logic EP93xx PATA support"
 451         depends on ARCH_EP93XX
 452         help
 453           This option enables support for the PATA controller in
 454           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 455
 456           If unsure, say N.
 457
 458 config PATA_HPT366
 459         tristate "HPT 366/368 PATA support"
 460         depends on PCI
 461         help
 462           This option enables support for the HPT 366 and 368
 463           PATA controllers via the new ATA layer.
 464
 465           If unsure, say N.
 466
 467 config PATA_HPT37X
 468         tristate "HPT 370/370A/371/372/374/302 PATA support"
 469         depends on PCI
 470         help
 471           This option enables support for the majority of the later HPT
 472           PATA controllers via the new ATA layer.
 473
 474           If unsure, say N.
 475
 476 config PATA_HPT3X2N
 477         tristate "HPT 371N/372N/302N PATA support"
 478         depends on PCI
 479         help
 480           This option enables support for the N variant HPT PATA
 481           controllers via the new ATA layer.
 482
 483           If unsure, say N.
 484
 485 config PATA_HPT3X3
 486         tristate "HPT 343/363 PATA support"
 487         depends on PCI
 488         help
 489           This option enables support for the HPT 343/363
 490           PATA controllers via the new ATA layer
 491
 492           If unsure, say N.
 493
 494 config PATA_HPT3X3_DMA
 495         bool "HPT 343/363 DMA support"
 496         depends on PATA_HPT3X3
 497         help
 498           This option enables DMA support for the HPT343/363
 499           controllers. Enable with care as there are still some
 500           problems with DMA on this chipset.
 501
 502 config PATA_ICSIDE
 503         tristate "Acorn ICS PATA support"
 504         depends on ARM && ARCH_ACORN
 505         help
 506           On Acorn systems, say Y here if you wish to use the ICS PATA
 507           interface card.  This is not required for ICS partition support.
 508           If you are unsure, say N to this.
 509
 510 config PATA_IMX
 511         tristate "PATA support for Freescale iMX"
 512         depends on ARCH_MXC
 513         help
 514           This option enables support for the PATA host available on Freescale
 515           iMX SoCs.
 516
 517           If unsure, say N.
 518
 519 config PATA_IT8213
 520         tristate "IT8213 PATA support (Experimental)"
 521         depends on PCI
 522         help
 523           This option enables support for the ITE 821 PATA
 524           controllers via the new ATA layer.
 525
 526           If unsure, say N.
 527
 528 config PATA_IT821X
 529         tristate "IT8211/2 PATA support"
 530         depends on PCI
 531         help
 532           This option enables support for the ITE 8211 and 8212
 533           PATA controllers via the new ATA layer, including RAID
 534           mode.
 535
 536           If unsure, say N.
 537
 538 config PATA_JMICRON
 539         tristate "JMicron PATA support"
 540         depends on PCI
 541         help
 542           Enable support for the JMicron IDE controller, via the new
 543           ATA layer.
 544
 545           If unsure, say N.
 546
 547 config PATA_MACIO
 548         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 549         depends on PPC_PMAC
 550         help
 551           Most IDE capable PowerMacs have IDE busses driven by a variant
 552           of this controller which is part of the Apple chipset used on
 553           most PowerMac models. Some models have multiple busses using
 554           different chipsets, though generally, MacIO is one of them.
 555
 556 config PATA_MARVELL
 557         tristate "Marvell PATA support via legacy mode"
 558         depends on PCI
 559         help
 560           This option enables limited support for the Marvell 88SE61xx ATA
 561           controllers. If you wish to use only the SATA ports then select
 562           the AHCI driver alone. If you wish to the use the PATA port or
 563           both SATA and PATA include this driver.
 564
 565           If unsure, say N.
 566
 567 config PATA_MPC52xx
 568         tristate "Freescale MPC52xx SoC internal IDE"
 569         depends on PPC_MPC52xx && PPC_BESTCOMM
 570         select PPC_BESTCOMM_ATA
 571         help
 572           This option enables support for integrated IDE controller
 573           of the Freescale MPC52xx SoC.
 574
 575           If unsure, say N.
 576
 577 config PATA_NETCELL
 578         tristate "NETCELL Revolution RAID support"
 579         depends on PCI
 580         help
 581           This option enables support for the Netcell Revolution RAID
 582           PATA controller.
 583
 584           If unsure, say N.
 585
 586 config PATA_NINJA32
 587         tristate "Ninja32/Delkin Cardbus ATA support"
 588         depends on PCI
 589         help
 590           This option enables support for the Ninja32, Delkin and
 591           possibly other brands of Cardbus ATA adapter
 592
 593           If unsure, say N.
 594
 595 config PATA_NS87415
 596         tristate "Nat Semi NS87415 PATA support"
 597         depends on PCI
 598         help
 599           This option enables support for the National Semiconductor
 600           NS87415 PCI-IDE controller.
 601
 602           If unsure, say N.
 603
 604 config PATA_OLDPIIX
 605         tristate "Intel PATA old PIIX support"
 606         depends on PCI
 607         help
 608           This option enables support for early PIIX PATA support.
 609
 610           If unsure, say N.
 611
 612 config PATA_OPTIDMA
 613         tristate "OPTI FireStar PATA support (Very Experimental)"
 614         depends on PCI
 615         help
 616           This option enables DMA/PIO support for the later OPTi
 617           controllers found on some old motherboards and in some
 618           laptops.
 619
 620           If unsure, say N.
 621
 622 config PATA_PDC2027X
 623         tristate "Promise PATA 2027x support"
 624         depends on PCI
 625         help
 626           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 627
 628           If unsure, say N.
 629
 630 config PATA_PDC_OLD
 631         tristate "Older Promise PATA controller support"
 632         depends on PCI
 633         help
 634           This option enables support for the Promise 20246, 20262, 20263,
 635           20265 and 20267 adapters.
 636
 637           If unsure, say N.
 638
 639 config PATA_RADISYS
 640         tristate "RADISYS 82600 PATA support (Experimental)"
 641         depends on PCI
 642         help
 643           This option enables support for the RADISYS 82600
 644           PATA controllers via the new ATA layer
 645
 646           If unsure, say N.
 647
 648 config PATA_RDC
 649         tristate "RDC PATA support"
 650         depends on PCI
 651         help
 652           This option enables basic support for the later RDC PATA controllers
 653           controllers via the new ATA layer. For the RDC 1010, you need to
 654           enable the IT821X driver instead.
 655
 656           If unsure, say N.
 657
 658 config PATA_SC1200
 659         tristate "SC1200 PATA support"
 660         depends on PCI
 661         help
 662           This option enables support for the NatSemi/AMD SC1200 SoC
 663           companion chip used with the Geode processor family.
 664
 665           If unsure, say N.
 666
 667 config PATA_SCC
 668         tristate "Toshiba's Cell Reference Set IDE support"
 669         depends on PCI && PPC_CELLEB
 670         help
 671           This option enables support for the built-in IDE controller on
 672           Toshiba Cell Reference Board.
 673
 674           If unsure, say N.
 675
 676 config PATA_SCH
 677         tristate "Intel SCH PATA support"
 678         depends on PCI
 679         help
 680           This option enables support for Intel SCH PATA on the Intel
 681           SCH (US15W, US15L, UL11L) series host controllers.
 682
 683           If unsure, say N.
 684
 685 config PATA_SERVERWORKS
 686         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 687         depends on PCI
 688         help
 689           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 690           HT1000 PATA controllers, via the new ATA layer.
 691
 692           If unsure, say N.
 693
 694 config PATA_SIL680
 695         tristate "CMD / Silicon Image 680 PATA support"
 696         depends on PCI
 697         help
 698           This option enables support for CMD / Silicon Image 680 PATA.
 699
 700           If unsure, say N.
 701
 702 config PATA_SIS
 703         tristate "SiS PATA support"
 704         depends on PCI
 705         help
 706           This option enables support for SiS PATA controllers
 707
 708           If unsure, say N.
 709
 710 config PATA_TOSHIBA
 711         tristate "Toshiba Piccolo support (Experimental)"
 712         depends on PCI
 713         help
 714           Support for the Toshiba Piccolo controllers. Currently only the
 715           primary channel is supported by this driver.
 716
 717           If unsure, say N.
 718
 719 config PATA_TRIFLEX
 720         tristate "Compaq Triflex PATA support"
 721         depends on PCI
 722         help
 723           Enable support for the Compaq 'Triflex' IDE controller as found
 724           on many Compaq Pentium-Pro systems, via the new ATA layer.
 725
 726           If unsure, say N.
 727
 728 config PATA_VIA
 729         tristate "VIA PATA support"
 730         depends on PCI
 731         help
 732           This option enables support for the VIA PATA interfaces
 733           found on the many VIA chipsets.
 734
 735           If unsure, say N.
 736
 737 config PATA_PXA
 738         tristate "PXA DMA-capable PATA support"
 739         depends on ARCH_PXA
 740         help
 741           This option enables support for harddrive attached to PXA CPU's bus.
 742
 743           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 744                 is not capable of doing MWDMA, use pata_platform instead.
 745
 746           If unsure, say N.
 747
 748 config PATA_WINBOND
 749         tristate "Winbond SL82C105 PATA support"
 750         depends on PCI
 751         help
 752           This option enables support for SL82C105 PATA devices found in the
 753           Netwinder and some other systems
 754
 755           If unsure, say N.
 756
 757 endif # ATA_BMDMA
 758
 759 comment "PIO-only SFF controllers"
 760
 761 config PATA_AT32
 762         tristate "Atmel AVR32 PATA support (Experimental)"
 763         depends on AVR32 && PLATFORM_AT32AP
 764         help
 765           This option enables support for the IDE devices on the
 766           Atmel AT32AP platform.
 767
 768           If unsure, say N.
 769
 770 config PATA_AT91
 771         tristate "PATA support for AT91SAM9260"
 772         depends on ARM && ARCH_AT91
 773         help
 774           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 775
 776           If unsure, say N.
 777
 778 config PATA_CMD640_PCI
 779         tristate "CMD640 PCI PATA support (Experimental)"
 780         depends on PCI
 781         help
 782           This option enables support for the CMD640 PCI IDE
 783           interface chip. Only the primary channel is currently
 784           supported.
 785
 786           If unsure, say N.
 787
 788 config PATA_ISAPNP
 789         tristate "ISA Plug and Play PATA support"
 790         depends on ISAPNP
 791         help
 792           This option enables support for ISA plug & play ATA
 793           controllers such as those found on old soundcards.
 794
 795           If unsure, say N.
 796
 797 config PATA_IXP4XX_CF
 798         tristate "IXP4XX Compact Flash support"
 799         depends on ARCH_IXP4XX
 800         help
 801           This option enables support for a Compact Flash connected on
 802           the ixp4xx expansion bus. This driver had been written for
 803           Loft/Avila boards in mind but can work with others.
 804
 805           If unsure, say N.
 806
 807 config PATA_MPIIX
 808         tristate "Intel PATA MPIIX support"
 809         depends on PCI
 810         help
 811           This option enables support for MPIIX PATA support.
 812
 813           If unsure, say N.
 814
 815 config PATA_NS87410
 816         tristate "Nat Semi NS87410 PATA support"
 817         depends on PCI
 818         help
 819           This option enables support for the National Semiconductor
 820           NS87410 PCI-IDE controller.
 821
 822           If unsure, say N.
 823
 824 config PATA_OPTI
 825         tristate "OPTI621/6215 PATA support (Very Experimental)"
 826         depends on PCI
 827         help
 828           This option enables full PIO support for the early Opti ATA
 829           controllers found on some old motherboards.
 830
 831           If unsure, say N.
 832
 833 config PATA_PALMLD
 834         tristate "Palm LifeDrive PATA support"
 835         depends on MACH_PALMLD
 836         help
 837           This option enables support for Palm LifeDrive's internal ATA
 838           port via the new ATA layer.
 839
 840           If unsure, say N.
 841
 842 config PATA_PCMCIA
 843         tristate "PCMCIA PATA support"
 844         depends on PCMCIA
 845         help
 846           This option enables support for PCMCIA ATA interfaces, including
 847           compact flash card adapters via the new ATA layer.
 848
 849           If unsure, say N.
 850
 851 config PATA_PLATFORM
 852         tristate "Generic platform device PATA support"
 853         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 854         help
 855           This option enables support for generic directly connected ATA
 856           devices commonly found on embedded systems.
 857
 858           If unsure, say N.
 859
 860 config PATA_OF_PLATFORM
 861         tristate "OpenFirmware platform device PATA support"
 862         depends on PATA_PLATFORM && OF
 863         help
 864           This option enables support for generic directly connected ATA
 865           devices commonly found on embedded systems with OpenFirmware
 866           bindings.
 867
 868           If unsure, say N.
 869
 870 config PATA_QDI
 871         tristate "QDI VLB PATA support"
 872         depends on ISA
 873         select PATA_LEGACY
 874         help
 875           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 876
 877 config PATA_RB532
 878         tristate "RouterBoard 532 PATA CompactFlash support"
 879         depends on MIKROTIK_RB532
 880         help
 881           This option enables support for the RouterBoard 532
 882           PATA CompactFlash controller.
 883
 884           If unsure, say N.
 885
 886 config PATA_RZ1000
 887         tristate "PC Tech RZ1000 PATA support"
 888         depends on PCI
 889         help
 890           This option enables basic support for the PC Tech RZ1000/1
 891           PATA controllers via the new ATA layer
 892
 893           If unsure, say N.
 894
 895 config PATA_SAMSUNG_CF
 896         tristate "Samsung SoC PATA support"
 897         depends on SAMSUNG_DEV_IDE
 898         help
 899           This option enables basic support for Samsung's S3C/S5P board
 900           PATA controllers via the new ATA layer
 901
 902           If unsure, say N.
 903
 904 config PATA_WINBOND_VLB
 905         tristate "Winbond W83759A VLB PATA support (Experimental)"
 906         depends on ISA
 907         select PATA_LEGACY
 908         help
 909           Support for the Winbond W83759A controller on Vesa Local Bus
 910           systems.
 911
 912 comment "Generic fallback / legacy drivers"
 913
 914 config PATA_ACPI
 915         tristate "ACPI firmware driver for PATA"
 916         depends on ATA_ACPI && ATA_BMDMA
 917         help
 918           This option enables an ACPI method driver which drives
 919           motherboard PATA controller interfaces through the ACPI
 920           firmware in the BIOS. This driver can sometimes handle
 921           otherwise unsupported hardware.
 922
 923 config ATA_GENERIC
 924         tristate "Generic ATA support"
 925         depends on PCI && ATA_BMDMA
 926         help
 927           This option enables support for generic BIOS configured
 928           ATA controllers via the new ATA layer
 929
 930           If unsure, say N.
 931
 932 config PATA_LEGACY
 933         tristate "Legacy ISA PATA support (Experimental)"
 934         depends on (ISA || PCI)
 935         help
 936           This option enables support for ISA/VLB/PCI bus legacy PATA
 937           ports and allows them to be accessed via the new ATA layer.
 938
 939           If unsure, say N.
 940
 941 endif # ATA_SFF
 942 endif # ATA