Linux-2.6.12-rc2

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / x86_64 / kernel / kprobes.c

/*
 *  Kernel Probes (KProbes)
 *  arch/x86_64/kernel/kprobes.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 *
 * Copyright (C) IBM Corporation, 2002, 2004
 *
 * 2002-Oct     Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
 *              Probes initial implementation ( includes contributions from
 *              Rusty Russell).
 * 2004-July    Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
 *              interface to access function arguments.
 * 2004-Oct     Jim Keniston <kenistoj@us.ibm.com> and Prasanna S Panchamukhi
 *              <prasanna@in.ibm.com> adapted for x86_64
 * 2005-Mar     Roland McGrath <roland@redhat.com>
 *              Fixed to handle %rip-relative addressing mode correctly.
 */

#include <linux/config.h>
#include <linux/kprobes.h>
#include <linux/ptrace.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/preempt.h>
#include <linux/moduleloader.h>

#include <asm/pgtable.h>
#include <asm/kdebug.h>

static DECLARE_MUTEX(kprobe_mutex);

/* kprobe_status settings */
#define KPROBE_HIT_ACTIVE       0x00000001
#define KPROBE_HIT_SS           0x00000002

static struct kprobe *current_kprobe;
static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags;
static struct pt_regs jprobe_saved_regs;
static long *jprobe_saved_rsp;
static kprobe_opcode_t *get_insn_slot(void);
static void free_insn_slot(kprobe_opcode_t *slot);
void jprobe_return_end(void);

/* copy of the kernel stack at the probe fire time */
static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];

/*
 * returns non-zero if opcode modifies the interrupt flag.
 */
static inline int is_IF_modifier(kprobe_opcode_t *insn)
{
        switch (*insn) {
        case 0xfa:              /* cli */
        case 0xfb:              /* sti */
        case 0xcf:              /* iret/iretd */
        case 0x9d:              /* popf/popfd */
                return 1;
        }

        if (*insn  >= 0x40 && *insn <= 0x4f && *++insn == 0xcf)
                return 1;
        return 0;
}

int arch_prepare_kprobe(struct kprobe *p)
{
        /* insn: must be on special executable page on x86_64. */
        up(&kprobe_mutex);
        p->ainsn.insn = get_insn_slot();
        down(&kprobe_mutex);
        if (!p->ainsn.insn) {
                return -ENOMEM;
        }
        return 0;
}

/*
 * Determine if the instruction uses the %rip-relative addressing mode.
 * If it does, return the address of the 32-bit displacement word.
 * If not, return null.
 */
static inline s32 *is_riprel(u8 *insn)
{
#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf)                \
        (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
          (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) |   \
          (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) |   \
          (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf))    \
         << (row % 64))
        static const u64 onebyte_has_modrm[256 / 64] = {
                /*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
                /*      -------------------------------         */
                W(0x00, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 00 */
                W(0x10, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 10 */
                W(0x20, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 20 */
                W(0x30, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0), /* 30 */
                W(0x40, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 40 */
                W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 50 */
                W(0x60, 0,0,1,1,0,0,0,0,0,1,0,1,0,0,0,0)| /* 60 */
                W(0x70, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 70 */
                W(0x80, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 80 */
                W(0x90, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 90 */
                W(0xa0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* a0 */
                W(0xb0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* b0 */
                W(0xc0, 1,1,0,0,1,1,1,1,0,0,0,0,0,0,0,0)| /* c0 */
                W(0xd0, 1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1)| /* d0 */
                W(0xe0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* e0 */
                W(0xf0, 0,0,0,0,0,0,1,1,0,0,0,0,0,0,1,1)  /* f0 */
                /*      -------------------------------         */
                /*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
        };
        static const u64 twobyte_has_modrm[256 / 64] = {
                /*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
                /*      -------------------------------         */
                W(0x00, 1,1,1,1,0,0,0,0,0,0,0,0,0,1,0,1)| /* 0f */
                W(0x10, 1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0)| /* 1f */
                W(0x20, 1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1)| /* 2f */
                W(0x30, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 3f */
                W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 4f */
                W(0x50, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 5f */
                W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 6f */
                W(0x70, 1,1,1,1,1,1,1,0,0,0,0,0,1,1,1,1), /* 7f */
                W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 8f */
                W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 9f */
                W(0xa0, 0,0,0,1,1,1,1,1,0,0,0,1,1,1,1,1)| /* af */
                W(0xb0, 1,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1), /* bf */
                W(0xc0, 1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0)| /* cf */
                W(0xd0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* df */
                W(0xe0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* ef */
                W(0xf0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0)  /* ff */
                /*      -------------------------------         */
                /*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
        };
#undef  W
        int need_modrm;

        /* Skip legacy instruction prefixes.  */
        while (1) {
                switch (*insn) {
                case 0x66:
                case 0x67:
                case 0x2e:
                case 0x3e:
                case 0x26:
                case 0x64:
                case 0x65:
                case 0x36:
                case 0xf0:
                case 0xf3:
                case 0xf2:
                        ++insn;
                        continue;
                }
                break;
        }

        /* Skip REX instruction prefix.  */
        if ((*insn & 0xf0) == 0x40)
                ++insn;

        if (*insn == 0x0f) {    /* Two-byte opcode.  */
                ++insn;
                need_modrm = test_bit(*insn, twobyte_has_modrm);
        } else {                /* One-byte opcode.  */
                need_modrm = test_bit(*insn, onebyte_has_modrm);
        }

        if (need_modrm) {
                u8 modrm = *++insn;
                if ((modrm & 0xc7) == 0x05) { /* %rip+disp32 addressing mode */
                        /* Displacement follows ModRM byte.  */
                        return (s32 *) ++insn;
                }
        }

        /* No %rip-relative addressing mode here.  */
        return NULL;
}

void arch_copy_kprobe(struct kprobe *p)
{
        s32 *ripdisp;
        memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
        ripdisp = is_riprel(p->ainsn.insn);
        if (ripdisp) {
                /*
                 * The copied instruction uses the %rip-relative
                 * addressing mode.  Adjust the displacement for the
                 * difference between the original location of this
                 * instruction and the location of the copy that will
                 * actually be run.  The tricky bit here is making sure
                 * that the sign extension happens correctly in this
                 * calculation, since we need a signed 32-bit result to
                 * be sign-extended to 64 bits when it's added to the
                 * %rip value and yield the same 64-bit result that the
                 * sign-extension of the original signed 32-bit
                 * displacement would have given.
                 */
                s64 disp = (u8 *) p->addr + *ripdisp - (u8 *) p->ainsn.insn;
                BUG_ON((s64) (s32) disp != disp); /* Sanity check.  */
                *ripdisp = disp;
        }
}

void arch_remove_kprobe(struct kprobe *p)
{
        up(&kprobe_mutex);
        free_insn_slot(p->ainsn.insn);
        down(&kprobe_mutex);
}

static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
{
        *p->addr = p->opcode;
        regs->rip = (unsigned long)p->addr;
}

static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
{
        regs->eflags |= TF_MASK;
        regs->eflags &= ~IF_MASK;
        /*single step inline if the instruction is an int3*/
        if (p->opcode == BREAKPOINT_INSTRUCTION)
                regs->rip = (unsigned long)p->addr;
        else
                regs->rip = (unsigned long)p->ainsn.insn;
}

/*
 * Interrupts are disabled on entry as trap3 is an interrupt gate and they
 * remain disabled thorough out this function.
 */
int kprobe_handler(struct pt_regs *regs)
{
        struct kprobe *p;
        int ret = 0;
        kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t));

        /* We're in an interrupt, but this is clear and BUG()-safe. */
        preempt_disable();

        /* Check we're not actually recursing */
        if (kprobe_running()) {
                /* We *are* holding lock here, so this is safe.
                   Disarm the probe we just hit, and ignore it. */
                p = get_kprobe(addr);
                if (p) {
                        if (kprobe_status == KPROBE_HIT_SS) {
                                regs->eflags &= ~TF_MASK;
                                regs->eflags |= kprobe_saved_rflags;
                                unlock_kprobes();
                                goto no_kprobe;
                        }
                        disarm_kprobe(p, regs);
                        ret = 1;
                } else {
                        p = current_kprobe;
                        if (p->break_handler && p->break_handler(p, regs)) {
                                goto ss_probe;
                        }
                }
                /* If it's not ours, can't be delete race, (we hold lock). */
                goto no_kprobe;
        }

        lock_kprobes();
        p = get_kprobe(addr);
        if (!p) {
                unlock_kprobes();
                if (*addr != BREAKPOINT_INSTRUCTION) {
                        /*
                         * The breakpoint instruction was removed right
                         * after we hit it.  Another cpu has removed
                         * either a probepoint or a debugger breakpoint
                         * at this address.  In either case, no further
                         * handling of this interrupt is appropriate.
                         */
                        ret = 1;
                }
                /* Not one of ours: let kernel handle it */
                goto no_kprobe;
        }

        kprobe_status = KPROBE_HIT_ACTIVE;
        current_kprobe = p;
        kprobe_saved_rflags = kprobe_old_rflags
            = (regs->eflags & (TF_MASK | IF_MASK));
        if (is_IF_modifier(p->ainsn.insn))
                kprobe_saved_rflags &= ~IF_MASK;

        if (p->pre_handler && p->pre_handler(p, regs))
                /* handler has already set things up, so skip ss setup */
                return 1;

ss_probe:
        prepare_singlestep(p, regs);
        kprobe_status = KPROBE_HIT_SS;
        return 1;

no_kprobe:
        preempt_enable_no_resched();
        return ret;
}

/*
 * Called after single-stepping.  p->addr is the address of the
 * instruction whose first byte has been replaced by the "int 3"
 * instruction.  To avoid the SMP problems that can occur when we
 * temporarily put back the original opcode to single-step, we
 * single-stepped a copy of the instruction.  The address of this
 * copy is p->ainsn.insn.
 *
 * This function prepares to return from the post-single-step
 * interrupt.  We have to fix up the stack as follows:
 *
 * 0) Except in the case of absolute or indirect jump or call instructions,
 * the new rip is relative to the copied instruction.  We need to make
 * it relative to the original instruction.
 *
 * 1) If the single-stepped instruction was pushfl, then the TF and IF
 * flags are set in the just-pushed eflags, and may need to be cleared.
 *
 * 2) If the single-stepped instruction was a call, the return address
 * that is atop the stack is the address following the copied instruction.
 * We need to make it the address following the original instruction.
 */
static void resume_execution(struct kprobe *p, struct pt_regs *regs)
{
        unsigned long *tos = (unsigned long *)regs->rsp;
        unsigned long next_rip = 0;
        unsigned long copy_rip = (unsigned long)p->ainsn.insn;
        unsigned long orig_rip = (unsigned long)p->addr;
        kprobe_opcode_t *insn = p->ainsn.insn;

        /*skip the REX prefix*/
        if (*insn >= 0x40 && *insn <= 0x4f)
                insn++;

        switch (*insn) {
        case 0x9c:              /* pushfl */
                *tos &= ~(TF_MASK | IF_MASK);
                *tos |= kprobe_old_rflags;
                break;
        case 0xe8:              /* call relative - Fix return addr */
                *tos = orig_rip + (*tos - copy_rip);
                break;
        case 0xff:
                if ((*insn & 0x30) == 0x10) {
                        /* call absolute, indirect */
                        /* Fix return addr; rip is correct. */
                        next_rip = regs->rip;
                        *tos = orig_rip + (*tos - copy_rip);
                } else if (((*insn & 0x31) == 0x20) ||  /* jmp near, absolute indirect */
                           ((*insn & 0x31) == 0x21)) {  /* jmp far, absolute indirect */
                        /* rip is correct. */
                        next_rip = regs->rip;
                }
                break;
        case 0xea:              /* jmp absolute -- rip is correct */
                next_rip = regs->rip;
                break;
        default:
                break;
        }

        regs->eflags &= ~TF_MASK;
        if (next_rip) {
                regs->rip = next_rip;
        } else {
                regs->rip = orig_rip + (regs->rip - copy_rip);
        }
}

/*
 * Interrupts are disabled on entry as trap1 is an interrupt gate and they
 * remain disabled thoroughout this function.  And we hold kprobe lock.
 */
int post_kprobe_handler(struct pt_regs *regs)
{
        if (!kprobe_running())
                return 0;

        if (current_kprobe->post_handler)
                current_kprobe->post_handler(current_kprobe, regs, 0);

        resume_execution(current_kprobe, regs);
        regs->eflags |= kprobe_saved_rflags;

        unlock_kprobes();
        preempt_enable_no_resched();

        /*
         * if somebody else is singlestepping across a probe point, eflags
         * will have TF set, in which case, continue the remaining processing
         * of do_debug, as if this is not a probe hit.
         */
        if (regs->eflags & TF_MASK)
                return 0;

        return 1;
}

/* Interrupts disabled, kprobe_lock held. */
int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
        if (current_kprobe->fault_handler
            && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
                return 1;

        if (kprobe_status & KPROBE_HIT_SS) {
                resume_execution(current_kprobe, regs);
                regs->eflags |= kprobe_old_rflags;

                unlock_kprobes();
                preempt_enable_no_resched();
        }
        return 0;
}

/*
 * Wrapper routine for handling exceptions.
 */
int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
                             void *data)
{
        struct die_args *args = (struct die_args *)data;
        switch (val) {
        case DIE_INT3:
                if (kprobe_handler(args->regs))
                        return NOTIFY_STOP;
                break;
        case DIE_DEBUG:
                if (post_kprobe_handler(args->regs))
                        return NOTIFY_STOP;
                break;
        case DIE_GPF:
                if (kprobe_running() &&
                    kprobe_fault_handler(args->regs, args->trapnr))
                        return NOTIFY_STOP;
                break;
        case DIE_PAGE_FAULT:
                if (kprobe_running() &&
                    kprobe_fault_handler(args->regs, args->trapnr))
                        return NOTIFY_STOP;
                break;
        default:
                break;
        }
        return NOTIFY_DONE;
}

int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
        struct jprobe *jp = container_of(p, struct jprobe, kp);
        unsigned long addr;

        jprobe_saved_regs = *regs;
        jprobe_saved_rsp = (long *) regs->rsp;
        addr = (unsigned long)jprobe_saved_rsp;
        /*
         * As Linus pointed out, gcc assumes that the callee
         * owns the argument space and could overwrite it, e.g.
         * tailcall optimization. So, to be absolutely safe
         * we also save and restore enough stack bytes to cover
         * the argument area.
         */
        memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
        regs->eflags &= ~IF_MASK;
        regs->rip = (unsigned long)(jp->entry);
        return 1;
}

void jprobe_return(void)
{
        preempt_enable_no_resched();
        asm volatile ("       xchg   %%rbx,%%rsp     \n"
                      "       int3                      \n"
                      "       .globl jprobe_return_end  \n"
                      "       jprobe_return_end:        \n"
                      "       nop                       \n"::"b"
                      (jprobe_saved_rsp):"memory");
}

int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
        u8 *addr = (u8 *) (regs->rip - 1);
        unsigned long stack_addr = (unsigned long)jprobe_saved_rsp;
        struct jprobe *jp = container_of(p, struct jprobe, kp);

        if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
                if ((long *)regs->rsp != jprobe_saved_rsp) {
                        struct pt_regs *saved_regs =
                            container_of(jprobe_saved_rsp, struct pt_regs, rsp);
                        printk("current rsp %p does not match saved rsp %p\n",
                               (long *)regs->rsp, jprobe_saved_rsp);
                        printk("Saved registers for jprobe %p\n", jp);
                        show_registers(saved_regs);
                        printk("Current registers\n");
                        show_registers(regs);
                        BUG();
                }
                *regs = jprobe_saved_regs;
                memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
                       MIN_STACK_SIZE(stack_addr));
                return 1;
        }
        return 0;
}

/*
 * kprobe->ainsn.insn points to the copy of the instruction to be single-stepped.
 * By default on x86_64, pages we get from kmalloc or vmalloc are not
 * executable.  Single-stepping an instruction on such a page yields an
 * oops.  So instead of storing the instruction copies in their respective
 * kprobe objects, we allocate a page, map it executable, and store all the
 * instruction copies there.  (We can allocate additional pages if somebody
 * inserts a huge number of probes.)  Each page can hold up to INSNS_PER_PAGE
 * instruction slots, each of which is MAX_INSN_SIZE*sizeof(kprobe_opcode_t)
 * bytes.
 */
#define INSNS_PER_PAGE (PAGE_SIZE/(MAX_INSN_SIZE*sizeof(kprobe_opcode_t)))
struct kprobe_insn_page {
        struct hlist_node hlist;
        kprobe_opcode_t *insns;         /* page of instruction slots */
        char slot_used[INSNS_PER_PAGE];
        int nused;
};

static struct hlist_head kprobe_insn_pages;

/**
 * get_insn_slot() - Find a slot on an executable page for an instruction.
 * We allocate an executable page if there's no room on existing ones.
 */
static kprobe_opcode_t *get_insn_slot(void)
{
        struct kprobe_insn_page *kip;
        struct hlist_node *pos;

        hlist_for_each(pos, &kprobe_insn_pages) {
                kip = hlist_entry(pos, struct kprobe_insn_page, hlist);
                if (kip->nused < INSNS_PER_PAGE) {
                        int i;
                        for (i = 0; i < INSNS_PER_PAGE; i++) {
                                if (!kip->slot_used[i]) {
                                        kip->slot_used[i] = 1;
                                        kip->nused++;
                                        return kip->insns + (i*MAX_INSN_SIZE);
                                }
                        }
                        /* Surprise!  No unused slots.  Fix kip->nused. */
                        kip->nused = INSNS_PER_PAGE;
                }
        }

        /* All out of space.  Need to allocate a new page. Use slot 0.*/
        kip = kmalloc(sizeof(struct kprobe_insn_page), GFP_KERNEL);
        if (!kip) {
                return NULL;
        }

        /*
         * For the %rip-relative displacement fixups to be doable, we
         * need our instruction copy to be within +/- 2GB of any data it
         * might access via %rip.  That is, within 2GB of where the
         * kernel image and loaded module images reside.  So we allocate
         * a page in the module loading area.
         */
        kip->insns = module_alloc(PAGE_SIZE);
        if (!kip->insns) {
                kfree(kip);
                return NULL;
        }
        INIT_HLIST_NODE(&kip->hlist);
        hlist_add_head(&kip->hlist, &kprobe_insn_pages);
        memset(kip->slot_used, 0, INSNS_PER_PAGE);
        kip->slot_used[0] = 1;
        kip->nused = 1;
        return kip->insns;
}

/**
 * free_insn_slot() - Free instruction slot obtained from get_insn_slot().
 */
static void free_insn_slot(kprobe_opcode_t *slot)
{
        struct kprobe_insn_page *kip;
        struct hlist_node *pos;

        hlist_for_each(pos, &kprobe_insn_pages) {
                kip = hlist_entry(pos, struct kprobe_insn_page, hlist);
                if (kip->insns <= slot
                    && slot < kip->insns+(INSNS_PER_PAGE*MAX_INSN_SIZE)) {
                        int i = (slot - kip->insns) / MAX_INSN_SIZE;
                        kip->slot_used[i] = 0;
                        kip->nused--;
                        if (kip->nused == 0) {
                                /*
                                 * Page is no longer in use.  Free it unless
                                 * it's the last one.  We keep the last one
                                 * so as not to have to set it up again the
                                 * next time somebody inserts a probe.
                                 */
                                hlist_del(&kip->hlist);
                                if (hlist_empty(&kprobe_insn_pages)) {
                                        INIT_HLIST_NODE(&kip->hlist);
                                        hlist_add_head(&kip->hlist,
                                                &kprobe_insn_pages);
                                } else {
                                        module_free(NULL, kip->insns);
                                        kfree(kip);
                                }
                        }
                        return;
                }
        }
}