drivers: power: report battery voltage in AOSP compatible format

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / powerpc / kernel / misc_64.S

/*
 * This file contains miscellaneous low-level functions.
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
 *
 * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
 * and Paul Mackerras.
 * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
 * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 */

#include <linux/sys.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/kexec.h>
#include <asm/ptrace.h>

        .text

_GLOBAL(call_do_softirq)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
        mr      r1,r3
        bl      .__do_softirq
        ld      r1,0(r1)
        ld      r0,16(r1)
        mtlr    r0
        blr

_GLOBAL(call_handle_irq)
        ld      r8,0(r6)
        mflr    r0
        std     r0,16(r1)
        mtctr   r8
        stdu    r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
        mr      r1,r5
        bctrl
        ld      r1,0(r1)
        ld      r0,16(r1)
        mtlr    r0
        blr

        .section        ".toc","aw"
PPC64_CACHES:
        .tc             ppc64_caches[TC],ppc64_caches
        .section        ".text"

/*
 * Write any modified data cache blocks out to memory
 * and invalidate the corresponding instruction cache blocks.
 *
 * flush_icache_range(unsigned long start, unsigned long stop)
 *
 *   flush all bytes from start through stop-1 inclusive
 */

_KPROBE(__flush_icache_range)

/*
 * Flush the data cache to memory 
 * 
 * Different systems have different cache line sizes
 * and in some cases i-cache and d-cache line sizes differ from
 * each other.
 */
        ld      r10,PPC64_CACHES@toc(r2)
        lwz     r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
        addi    r5,r7,-1
        andc    r6,r3,r5                /* round low to line bdy */
        subf    r8,r6,r4                /* compute length */
        add     r8,r8,r5                /* ensure we get enough */
        lwz     r9,DCACHEL1LOGLINESIZE(r10)     /* Get log-2 of cache line size */
        srw.    r8,r8,r9                /* compute line count */
        beqlr                           /* nothing to do? */
        mtctr   r8
1:      dcbst   0,r6
        add     r6,r6,r7
        bdnz    1b
        sync

/* Now invalidate the instruction cache */
        
        lwz     r7,ICACHEL1LINESIZE(r10)        /* Get Icache line size */
        addi    r5,r7,-1
        andc    r6,r3,r5                /* round low to line bdy */
        subf    r8,r6,r4                /* compute length */
        add     r8,r8,r5
        lwz     r9,ICACHEL1LOGLINESIZE(r10)     /* Get log-2 of Icache line size */
        srw.    r8,r8,r9                /* compute line count */
        beqlr                           /* nothing to do? */
        mtctr   r8
2:      icbi    0,r6
        add     r6,r6,r7
        bdnz    2b
        isync
        blr
        .previous .text
/*
 * Like above, but only do the D-cache.
 *
 * flush_dcache_range(unsigned long start, unsigned long stop)
 *
 *    flush all bytes from start to stop-1 inclusive
 */
_GLOBAL(flush_dcache_range)

/*
 * Flush the data cache to memory 
 * 
 * Different systems have different cache line sizes
 */
        ld      r10,PPC64_CACHES@toc(r2)
        lwz     r7,DCACHEL1LINESIZE(r10)        /* Get dcache line size */
        addi    r5,r7,-1
        andc    r6,r3,r5                /* round low to line bdy */
        subf    r8,r6,r4                /* compute length */
        add     r8,r8,r5                /* ensure we get enough */
        lwz     r9,DCACHEL1LOGLINESIZE(r10)     /* Get log-2 of dcache line size */
        srw.    r8,r8,r9                /* compute line count */
        beqlr                           /* nothing to do? */
        mtctr   r8
0:      dcbst   0,r6
        add     r6,r6,r7
        bdnz    0b
        sync
        blr

/*
 * Like above, but works on non-mapped physical addresses.
 * Use only for non-LPAR setups ! It also assumes real mode
 * is cacheable. Used for flushing out the DART before using
 * it as uncacheable memory 
 *
 * flush_dcache_phys_range(unsigned long start, unsigned long stop)
 *
 *    flush all bytes from start to stop-1 inclusive
 */
_GLOBAL(flush_dcache_phys_range)
        ld      r10,PPC64_CACHES@toc(r2)
        lwz     r7,DCACHEL1LINESIZE(r10)        /* Get dcache line size */
        addi    r5,r7,-1
        andc    r6,r3,r5                /* round low to line bdy */
        subf    r8,r6,r4                /* compute length */
        add     r8,r8,r5                /* ensure we get enough */
        lwz     r9,DCACHEL1LOGLINESIZE(r10)     /* Get log-2 of dcache line size */
        srw.    r8,r8,r9                /* compute line count */
        beqlr                           /* nothing to do? */
        mfmsr   r5                      /* Disable MMU Data Relocation */
        ori     r0,r5,MSR_DR
        xori    r0,r0,MSR_DR
        sync
        mtmsr   r0
        sync
        isync
        mtctr   r8
0:      dcbst   0,r6
        add     r6,r6,r7
        bdnz    0b
        sync
        isync
        mtmsr   r5                      /* Re-enable MMU Data Relocation */
        sync
        isync
        blr

_GLOBAL(flush_inval_dcache_range)
        ld      r10,PPC64_CACHES@toc(r2)
        lwz     r7,DCACHEL1LINESIZE(r10)        /* Get dcache line size */
        addi    r5,r7,-1
        andc    r6,r3,r5                /* round low to line bdy */
        subf    r8,r6,r4                /* compute length */
        add     r8,r8,r5                /* ensure we get enough */
        lwz     r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
        srw.    r8,r8,r9                /* compute line count */
        beqlr                           /* nothing to do? */
        sync
        isync
        mtctr   r8
0:      dcbf    0,r6
        add     r6,r6,r7
        bdnz    0b
        sync
        isync
        blr


/*
 * Flush a particular page from the data cache to RAM.
 * Note: this is necessary because the instruction cache does *not*
 * snoop from the data cache.
 *
 *      void __flush_dcache_icache(void *page)
 */
_GLOBAL(__flush_dcache_icache)
/*
 * Flush the data cache to memory 
 * 
 * Different systems have different cache line sizes
 */

/* Flush the dcache */
        ld      r7,PPC64_CACHES@toc(r2)
        clrrdi  r3,r3,PAGE_SHIFT                    /* Page align */
        lwz     r4,DCACHEL1LINESPERPAGE(r7)     /* Get # dcache lines per page */
        lwz     r5,DCACHEL1LINESIZE(r7)         /* Get dcache line size */
        mr      r6,r3
        mtctr   r4
0:      dcbst   0,r6
        add     r6,r6,r5
        bdnz    0b
        sync

/* Now invalidate the icache */ 

        lwz     r4,ICACHEL1LINESPERPAGE(r7)     /* Get # icache lines per page */
        lwz     r5,ICACHEL1LINESIZE(r7)         /* Get icache line size */
        mtctr   r4
1:      icbi    0,r3
        add     r3,r3,r5
        bdnz    1b
        isync
        blr

_GLOBAL(__bswapdi2)
        srdi    r8,r3,32
        rlwinm  r7,r3,8,0xffffffff
        rlwimi  r7,r3,24,0,7
        rlwinm  r9,r8,8,0xffffffff
        rlwimi  r7,r3,24,16,23
        rlwimi  r9,r8,24,0,7
        rlwimi  r9,r8,24,16,23
        sldi    r7,r7,32
        or      r3,r7,r9
        blr

#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
 * Do an IO access in real mode
 */
_GLOBAL(real_readb)
        mfmsr   r7
        ori     r0,r7,MSR_DR
        xori    r0,r0,MSR_DR
        sync
        mtmsrd  r0
        sync
        isync
        mfspr   r6,SPRN_HID4
        rldicl  r5,r6,32,0
        ori     r5,r5,0x100
        rldicl  r5,r5,32,0
        sync
        mtspr   SPRN_HID4,r5
        isync
        slbia
        isync
        lbz     r3,0(r3)
        sync
        mtspr   SPRN_HID4,r6
        isync
        slbia
        isync
        mtmsrd  r7
        sync
        isync
        blr

        /*
 * Do an IO access in real mode
 */
_GLOBAL(real_writeb)
        mfmsr   r7
        ori     r0,r7,MSR_DR
        xori    r0,r0,MSR_DR
        sync
        mtmsrd  r0
        sync
        isync
        mfspr   r6,SPRN_HID4
        rldicl  r5,r6,32,0
        ori     r5,r5,0x100
        rldicl  r5,r5,32,0
        sync
        mtspr   SPRN_HID4,r5
        isync
        slbia
        isync
        stb     r3,0(r4)
        sync
        mtspr   SPRN_HID4,r6
        isync
        slbia
        isync
        mtmsrd  r7
        sync
        isync
        blr
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */

#ifdef CONFIG_PPC_PASEMI

_GLOBAL(real_205_readb)
        mfmsr   r7
        ori     r0,r7,MSR_DR
        xori    r0,r0,MSR_DR
        sync
        mtmsrd  r0
        sync
        isync
        LBZCIX(R3,R0,R3)
        isync
        mtmsrd  r7
        sync
        isync
        blr

_GLOBAL(real_205_writeb)
        mfmsr   r7
        ori     r0,r7,MSR_DR
        xori    r0,r0,MSR_DR
        sync
        mtmsrd  r0
        sync
        isync
        STBCIX(R3,R0,R4)
        isync
        mtmsrd  r7
        sync
        isync
        blr

#endif /* CONFIG_PPC_PASEMI */


#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
/*
 * SCOM access functions for 970 (FX only for now)
 *
 * unsigned long scom970_read(unsigned int address);
 * void scom970_write(unsigned int address, unsigned long value);
 *
 * The address passed in is the 24 bits register address. This code
 * is 970 specific and will not check the status bits, so you should
 * know what you are doing.
 */
_GLOBAL(scom970_read)
        /* interrupts off */
        mfmsr   r4
        ori     r0,r4,MSR_EE
        xori    r0,r0,MSR_EE
        mtmsrd  r0,1

        /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
         * (including parity). On current CPUs they must be 0'd,
         * and finally or in RW bit
         */
        rlwinm  r3,r3,8,0,15
        ori     r3,r3,0x8000

        /* do the actual scom read */
        sync
        mtspr   SPRN_SCOMC,r3
        isync
        mfspr   r3,SPRN_SCOMD
        isync
        mfspr   r0,SPRN_SCOMC
        isync

        /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
         * that's the best we can do). Not implemented yet as we don't use
         * the scom on any of the bogus CPUs yet, but may have to be done
         * ultimately
         */

        /* restore interrupts */
        mtmsrd  r4,1
        blr


_GLOBAL(scom970_write)
        /* interrupts off */
        mfmsr   r5
        ori     r0,r5,MSR_EE
        xori    r0,r0,MSR_EE
        mtmsrd  r0,1

        /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
         * (including parity). On current CPUs they must be 0'd.
         */

        rlwinm  r3,r3,8,0,15

        sync
        mtspr   SPRN_SCOMD,r4      /* write data */
        isync
        mtspr   SPRN_SCOMC,r3      /* write command */
        isync
        mfspr   3,SPRN_SCOMC
        isync

        /* restore interrupts */
        mtmsrd  r5,1
        blr
#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */


/*
 * disable_kernel_fp()
 * Disable the FPU.
 */
_GLOBAL(disable_kernel_fp)
        mfmsr   r3
        rldicl  r0,r3,(63-MSR_FP_LG),1
        rldicl  r3,r0,(MSR_FP_LG+1),0
        mtmsrd  r3                      /* disable use of fpu now */
        isync
        blr

/* kexec_wait(phys_cpu)
 *
 * wait for the flag to change, indicating this kernel is going away but
 * the slave code for the next one is at addresses 0 to 100.
 *
 * This is used by all slaves, even those that did not find a matching
 * paca in the secondary startup code.
 *
 * Physical (hardware) cpu id should be in r3.
 */
_GLOBAL(kexec_wait)
        bl      1f
1:      mflr    r5
        addi    r5,r5,kexec_flag-1b

99:     HMT_LOW
#ifdef CONFIG_KEXEC             /* use no memory without kexec */
        lwz     r4,0(r5)
        cmpwi   0,r4,0
        bnea    0x60
#endif
        b       99b

/* this can be in text because we won't change it until we are
 * running in real anyways
 */
kexec_flag:
        .long   0


#ifdef CONFIG_KEXEC

/* kexec_smp_wait(void)
 *
 * call with interrupts off
 * note: this is a terminal routine, it does not save lr
 *
 * get phys id from paca
 * switch to real mode
 * mark the paca as no longer used
 * join other cpus in kexec_wait(phys_id)
 */
_GLOBAL(kexec_smp_wait)
        lhz     r3,PACAHWCPUID(r13)
        bl      real_mode

        li      r4,KEXEC_STATE_REAL_MODE
        stb     r4,PACAKEXECSTATE(r13)
        SYNC

        b       .kexec_wait

/*
 * switch to real mode (turn mmu off)
 * we use the early kernel trick that the hardware ignores bits
 * 0 and 1 (big endian) of the effective address in real mode
 *
 * don't overwrite r3 here, it is live for kexec_wait above.
 */
real_mode:      /* assume normal blr return */
1:      li      r9,MSR_RI
        li      r10,MSR_DR|MSR_IR
        mflr    r11             /* return address to SRR0 */
        mfmsr   r12
        andc    r9,r12,r9
        andc    r10,r12,r10

        mtmsrd  r9,1
        mtspr   SPRN_SRR1,r10
        mtspr   SPRN_SRR0,r11
        rfid


/*
 * kexec_sequence(newstack, start, image, control, clear_all())
 *
 * does the grungy work with stack switching and real mode switches
 * also does simple calls to other code
 */

_GLOBAL(kexec_sequence)
        mflr    r0
        std     r0,16(r1)

        /* switch stacks to newstack -- &kexec_stack.stack */
        stdu    r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
        mr      r1,r3

        li      r0,0
        std     r0,16(r1)

        /* save regs for local vars on new stack.
         * yes, we won't go back, but ...
         */
        std     r31,-8(r1)
        std     r30,-16(r1)
        std     r29,-24(r1)
        std     r28,-32(r1)
        std     r27,-40(r1)
        std     r26,-48(r1)
        std     r25,-56(r1)

        stdu    r1,-STACK_FRAME_OVERHEAD-64(r1)

        /* save args into preserved regs */
        mr      r31,r3                  /* newstack (both) */
        mr      r30,r4                  /* start (real) */
        mr      r29,r5                  /* image (virt) */
        mr      r28,r6                  /* control, unused */
        mr      r27,r7                  /* clear_all() fn desc */
        mr      r26,r8                  /* spare */
        lhz     r25,PACAHWCPUID(r13)    /* get our phys cpu from paca */

        /* disable interrupts, we are overwriting kernel data next */
        mfmsr   r3
        rlwinm  r3,r3,0,17,15
        mtmsrd  r3,1

        /* copy dest pages, flush whole dest image */
        mr      r3,r29
        bl      .kexec_copy_flush       /* (image) */

        /* turn off mmu */
        bl      real_mode

        /* copy  0x100 bytes starting at start to 0 */
        li      r3,0
        mr      r4,r30          /* start, aka phys mem offset */
        li      r5,0x100
        li      r6,0
        bl      .copy_and_flush /* (dest, src, copy limit, start offset) */
1:      /* assume normal blr return */

        /* release other cpus to the new kernel secondary start at 0x60 */
        mflr    r5
        li      r6,1
        stw     r6,kexec_flag-1b(5)

        /* clear out hardware hash page table and tlb */
        ld      r5,0(r27)               /* deref function descriptor */
        mtctr   r5
        bctrl                           /* ppc_md.hpte_clear_all(void); */

/*
 *   kexec image calling is:
 *      the first 0x100 bytes of the entry point are copied to 0
 *
 *      all slaves branch to slave = 0x60 (absolute)
 *              slave(phys_cpu_id);
 *
 *      master goes to start = entry point
 *              start(phys_cpu_id, start, 0);
 *
 *
 *   a wrapper is needed to call existing kernels, here is an approximate
 *   description of one method:
 *
 * v2: (2.6.10)
 *   start will be near the boot_block (maybe 0x100 bytes before it?)
 *   it will have a 0x60, which will b to boot_block, where it will wait
 *   and 0 will store phys into struct boot-block and load r3 from there,
 *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
 *
 * v1: (2.6.9)
 *    boot block will have all cpus scanning device tree to see if they
 *    are the boot cpu ?????
 *    other device tree differences (prop sizes, va vs pa, etc)...
 */
        mr      r3,r25  # my phys cpu
        mr      r4,r30  # start, aka phys mem offset
        mtlr    4
        li      r5,0
        blr     /* image->start(physid, image->start, 0); */
#endif /* CONFIG_KEXEC */