arch/mips/ddb5xxx/ddb5476/irq.c

   1 /*
   2  *  arch/mips/ddb5476/irq.c -- NEC DDB Vrc-5476 interrupt routines
   3  *
   4  *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
   5  *                     Sony Software Development Center Europe (SDCE), Brussels
   6  *
   7  * Re-write the whole thing to use new irq.c file.
   8  * Copyright (C) 2001 MontaVista Software Inc.
   9  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  10  *
  11  */
  12 #include <linux/init.h>
  13 #include <linux/sched.h>
  14 #include <linux/types.h>
  15 #include <linux/interrupt.h>
  16
  17 #include <asm/i8259.h>
  18 #include <asm/io.h>
  19 #include <asm/ptrace.h>
  20
  21 #include <asm/ddb5xxx/ddb5xxx.h>
  22
  23 #define M1543_PNP_CONFIG        0x03f0  /* PnP Config Port */
  24 #define M1543_PNP_INDEX         0x03f0  /* PnP Index Port */
  25 #define M1543_PNP_DATA          0x03f1  /* PnP Data Port */
  26
  27 #define M1543_PNP_ALT_CONFIG    0x0370  /* Alternative PnP Config Port */
  28 #define M1543_PNP_ALT_INDEX     0x0370  /* Alternative PnP Index Port */
  29 #define M1543_PNP_ALT_DATA      0x0371  /* Alternative PnP Data Port */
  30
  31 #define M1543_INT1_MASTER_CTRL  0x0020  /* INT_1 (master) Control Register */
  32 #define M1543_INT1_MASTER_MASK  0x0021  /* INT_1 (master) Mask Register */
  33
  34 #define M1543_INT1_SLAVE_CTRL   0x00a0  /* INT_1 (slave) Control Register */
  35 #define M1543_INT1_SLAVE_MASK   0x00a1  /* INT_1 (slave) Mask Register */
  36
  37 #define M1543_INT1_MASTER_ELCR  0x04d0  /* INT_1 (master) Edge/Level Control */
  38 #define M1543_INT1_SLAVE_ELCR   0x04d1  /* INT_1 (slave) Edge/Level Control */
  39
  40 static void m1543_irq_setup(void)
  41 {
  42         /*
  43          *  The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13.  Not all
  44          *  the possible IO sources in the M1543 are in use by us.  We will
  45          *  use the following mapping:
  46          *
  47          *      IRQ1  - keyboard (default set by M1543)
  48          *      IRQ3  - reserved for UART B (default set by M1543) (note that
  49          *              the schematics for the DDB Vrc-5476 board seem to
  50          *              indicate that IRQ3 is connected to the DS1386
  51          *              watchdog timer interrupt output so we might have
  52          *              a conflict)
  53          *      IRQ4  - reserved for UART A (default set by M1543)
  54          *      IRQ5  - parallel (default set by M1543)
  55          *      IRQ8  - DS1386 time of day (RTC) interrupt
  56          *      IRQ9  - USB (hardwired in ddb_setup)
  57          *      IRQ10 - PMU (hardwired in ddb_setup)
  58          *      IRQ12 - mouse
  59          *      IRQ14,15 - IDE controller (need to be confirmed, jsun)
  60          */
  61
  62         /*
  63          *  Assing mouse interrupt to IRQ12
  64          */
  65
  66         /* Enter configuration mode */
  67         outb(0x51, M1543_PNP_CONFIG);
  68         outb(0x23, M1543_PNP_CONFIG);
  69
  70         /* Select logical device 7 (Keyboard) */
  71         outb(0x07, M1543_PNP_INDEX);
  72         outb(0x07, M1543_PNP_DATA);
  73
  74         /* Select IRQ12 */
  75         outb(0x72, M1543_PNP_INDEX);
  76         outb(0x0c, M1543_PNP_DATA);
  77
  78         /* Leave configration mode */
  79         outb(0xbb, M1543_PNP_CONFIG);
  80 }
  81
  82 static void nile4_irq_setup(void)
  83 {
  84         int i;
  85
  86         /* Map all interrupts to CPU int #0 (IP2) */
  87         nile4_map_irq_all(0);
  88
  89         /* PCI INTA#-E# must be level triggered */
  90         nile4_set_pci_irq_level_or_edge(0, 1);
  91         nile4_set_pci_irq_level_or_edge(1, 1);
  92         nile4_set_pci_irq_level_or_edge(2, 1);
  93         nile4_set_pci_irq_level_or_edge(3, 1);
  94
  95         /* PCI INTA#, B#, D# must be active low, INTC# must be active high */
  96         nile4_set_pci_irq_polarity(0, 0);
  97         nile4_set_pci_irq_polarity(1, 0);
  98         nile4_set_pci_irq_polarity(2, 1);
  99         nile4_set_pci_irq_polarity(3, 0);
 100
 101         for (i = 0; i < 16; i++)
 102                 nile4_clear_irq(i);
 103
 104         /* Enable CPU int #0 */
 105         nile4_enable_irq_output(0);
 106
 107         /* memory resource acquire in ddb_setup */
 108 }
 109
 110 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 111 static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
 112
 113 extern asmlinkage void ddb5476_handle_int(void);
 114 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 115 extern void mips_cpu_irq_init(u32 irq_base);
 116 extern void vrc5476_irq_init(u32 irq_base);
 117
 118 void __init arch_init_irq(void)
 119 {
 120         /* hardware initialization */
 121         nile4_irq_setup();
 122         m1543_irq_setup();
 123
 124         /* controller setup */
 125         init_i8259_irqs();
 126         vrc5476_irq_init(VRC5476_IRQ_BASE);
 127         mips_cpu_irq_init(CPU_IRQ_BASE);
 128
 129         /* setup cascade interrupts */
 130         setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade);
 131         setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade);
 132
 133         /* setup error interrupts for debugging */
 134         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error);
 135         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error);
 136         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error);
 137         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
 138         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
 139         setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
 140
 141         /* setup the grandpa intr vector */
 142         set_except_vector(0, ddb5476_handle_int);
 143 }