Merge commit 'linus/master' into HEAD

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / blackfin / kernel / setup.c

/*
 * arch/blackfin/kernel/setup.c
 *
 * Copyright 2004-2006 Analog Devices Inc.
 *
 * Enter bugs at http://blackfin.uclinux.org/
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/delay.h>
#include <linux/console.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/pfn.h>

#ifdef CONFIG_MTD_UCLINUX
#include <linux/mtd/map.h>
#include <linux/ext2_fs.h>
#include <linux/cramfs_fs.h>
#include <linux/romfs_fs.h>
#endif

#include <asm/cplb.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
#include <asm/div64.h>
#include <asm/cpu.h>
#include <asm/fixed_code.h>
#include <asm/early_printk.h>

u16 _bfin_swrst;
EXPORT_SYMBOL(_bfin_swrst);

unsigned long memory_start, memory_end, physical_mem_end;
unsigned long _rambase, _ramstart, _ramend;
unsigned long reserved_mem_dcache_on;
unsigned long reserved_mem_icache_on;
EXPORT_SYMBOL(memory_start);
EXPORT_SYMBOL(memory_end);
EXPORT_SYMBOL(physical_mem_end);
EXPORT_SYMBOL(_ramend);
EXPORT_SYMBOL(reserved_mem_dcache_on);

#ifdef CONFIG_MTD_UCLINUX
extern struct map_info uclinux_ram_map;
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
unsigned long _ebss;
EXPORT_SYMBOL(memory_mtd_end);
EXPORT_SYMBOL(memory_mtd_start);
EXPORT_SYMBOL(mtd_size);
#endif

char __initdata command_line[COMMAND_LINE_SIZE];
void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
        *init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;

/* boot memmap, for parsing "memmap=" */
#define BFIN_MEMMAP_MAX         128 /* number of entries in bfin_memmap */
#define BFIN_MEMMAP_RAM         1
#define BFIN_MEMMAP_RESERVED    2
static struct bfin_memmap {
        int nr_map;
        struct bfin_memmap_entry {
                unsigned long long addr; /* start of memory segment */
                unsigned long long size;
                unsigned long type;
        } map[BFIN_MEMMAP_MAX];
} bfin_memmap __initdata;

/* for memmap sanitization */
struct change_member {
        struct bfin_memmap_entry *pentry; /* pointer to original entry */
        unsigned long long addr; /* address for this change point */
};
static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;

DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data);

static int early_init_clkin_hz(char *buf);

#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
void __init generate_cplb_tables(void)
{
        unsigned int cpu;

        generate_cplb_tables_all();
        /* Generate per-CPU I&D CPLB tables */
        for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
                generate_cplb_tables_cpu(cpu);
}
#endif

void __cpuinit bfin_setup_caches(unsigned int cpu)
{
#ifdef CONFIG_BFIN_ICACHE
        bfin_icache_init(icplb_tbl[cpu]);
#endif

#ifdef CONFIG_BFIN_DCACHE
        bfin_dcache_init(dcplb_tbl[cpu]);
#endif

        /*
         * In cache coherence emulation mode, we need to have the
         * D-cache enabled before running any atomic operation which
         * might invove cache invalidation (i.e. spinlock, rwlock).
         * So printk's are deferred until then.
         */
#ifdef CONFIG_BFIN_ICACHE
        printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
#endif
#ifdef CONFIG_BFIN_DCACHE
        printk(KERN_INFO "Data Cache Enabled for CPU%u"
# if defined CONFIG_BFIN_WB
                " (write-back)"
# elif defined CONFIG_BFIN_WT
                " (write-through)"
# endif
                "\n", cpu);
#endif
}

void __cpuinit bfin_setup_cpudata(unsigned int cpu)
{
        struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);

        cpudata->idle = current;
        cpudata->loops_per_jiffy = loops_per_jiffy;
        cpudata->imemctl = bfin_read_IMEM_CONTROL();
        cpudata->dmemctl = bfin_read_DMEM_CONTROL();
}

void __init bfin_cache_init(void)
{
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
        generate_cplb_tables();
#endif
        bfin_setup_caches(0);
}

void __init bfin_relocate_l1_mem(void)
{
        unsigned long l1_code_length;
        unsigned long l1_data_a_length;
        unsigned long l1_data_b_length;
        unsigned long l2_length;

        /*
         * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
         * we know that everything about l1 text/data is nice and aligned,
         * so copy by 4 byte chunks, and don't worry about overlapping
         * src/dest.
         *
         * We can't use the dma_memcpy functions, since they can call
         * scheduler functions which might be in L1 :( and core writes
         * into L1 instruction cause bad access errors, so we are stuck,
         * we are required to use DMA, but can't use the common dma
         * functions. We can't use memcpy either - since that might be
         * going to be in the relocated L1
         */

        blackfin_dma_early_init();

        /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
        l1_code_length = _etext_l1 - _stext_l1;
        if (l1_code_length)
                early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);

        /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
        l1_data_a_length = _sbss_l1 - _sdata_l1;
        if (l1_data_a_length)
                early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);

        /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
        l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
        if (l1_data_b_length)
                early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
                        l1_data_a_length, l1_data_b_length);

        early_dma_memcpy_done();

        /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
        if (L2_LENGTH != 0) {
                l2_length = _sbss_l2 - _stext_l2;
                if (l2_length)
                        memcpy(_stext_l2, _l2_lma_start, l2_length);
        }
}

/* add_memory_region to memmap */
static void __init add_memory_region(unsigned long long start,
                              unsigned long long size, int type)
{
        int i;

        i = bfin_memmap.nr_map;

        if (i == BFIN_MEMMAP_MAX) {
                printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
                return;
        }

        bfin_memmap.map[i].addr = start;
        bfin_memmap.map[i].size = size;
        bfin_memmap.map[i].type = type;
        bfin_memmap.nr_map++;
}

/*
 * Sanitize the boot memmap, removing overlaps.
 */
static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
{
        struct change_member *change_tmp;
        unsigned long current_type, last_type;
        unsigned long long last_addr;
        int chgidx, still_changing;
        int overlap_entries;
        int new_entry;
        int old_nr, new_nr, chg_nr;
        int i;

        /*
                Visually we're performing the following (1,2,3,4 = memory types)

                Sample memory map (w/overlaps):
                   ____22__________________
                   ______________________4_
                   ____1111________________
                   _44_____________________
                   11111111________________
                   ____________________33__
                   ___________44___________
                   __________33333_________
                   ______________22________
                   ___________________2222_
                   _________111111111______
                   _____________________11_
                   _________________4______

                Sanitized equivalent (no overlap):
                   1_______________________
                   _44_____________________
                   ___1____________________
                   ____22__________________
                   ______11________________
                   _________1______________
                   __________3_____________
                   ___________44___________
                   _____________33_________
                   _______________2________
                   ________________1_______
                   _________________4______
                   ___________________2____
                   ____________________33__
                   ______________________4_
        */
        /* if there's only one memory region, don't bother */
        if (*pnr_map < 2)
                return -1;

        old_nr = *pnr_map;

        /* bail out if we find any unreasonable addresses in memmap */
        for (i = 0; i < old_nr; i++)
                if (map[i].addr + map[i].size < map[i].addr)
                        return -1;

        /* create pointers for initial change-point information (for sorting) */
        for (i = 0; i < 2*old_nr; i++)
                change_point[i] = &change_point_list[i];

        /* record all known change-points (starting and ending addresses),
           omitting those that are for empty memory regions */
        chgidx = 0;
        for (i = 0; i < old_nr; i++) {
                if (map[i].size != 0) {
                        change_point[chgidx]->addr = map[i].addr;
                        change_point[chgidx++]->pentry = &map[i];
                        change_point[chgidx]->addr = map[i].addr + map[i].size;
                        change_point[chgidx++]->pentry = &map[i];
                }
        }
        chg_nr = chgidx;        /* true number of change-points */

        /* sort change-point list by memory addresses (low -> high) */
        still_changing = 1;
        while (still_changing) {
                still_changing = 0;
                for (i = 1; i < chg_nr; i++) {
                        /* if <current_addr> > <last_addr>, swap */
                        /* or, if current=<start_addr> & last=<end_addr>, swap */
                        if ((change_point[i]->addr < change_point[i-1]->addr) ||
                                ((change_point[i]->addr == change_point[i-1]->addr) &&
                                 (change_point[i]->addr == change_point[i]->pentry->addr) &&
                                 (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
                           ) {
                                change_tmp = change_point[i];
                                change_point[i] = change_point[i-1];
                                change_point[i-1] = change_tmp;
                                still_changing = 1;
                        }
                }
        }

        /* create a new memmap, removing overlaps */
        overlap_entries = 0;    /* number of entries in the overlap table */
        new_entry = 0;          /* index for creating new memmap entries */
        last_type = 0;          /* start with undefined memory type */
        last_addr = 0;          /* start with 0 as last starting address */
        /* loop through change-points, determining affect on the new memmap */
        for (chgidx = 0; chgidx < chg_nr; chgidx++) {
                /* keep track of all overlapping memmap entries */
                if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
                        /* add map entry to overlap list (> 1 entry implies an overlap) */
                        overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
                } else {
                        /* remove entry from list (order independent, so swap with last) */
                        for (i = 0; i < overlap_entries; i++) {
                                if (overlap_list[i] == change_point[chgidx]->pentry)
                                        overlap_list[i] = overlap_list[overlap_entries-1];
                        }
                        overlap_entries--;
                }
                /* if there are overlapping entries, decide which "type" to use */
                /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
                current_type = 0;
                for (i = 0; i < overlap_entries; i++)
                        if (overlap_list[i]->type > current_type)
                                current_type = overlap_list[i]->type;
                /* continue building up new memmap based on this information */
                if (current_type != last_type) {
                        if (last_type != 0) {
                                new_map[new_entry].size =
                                        change_point[chgidx]->addr - last_addr;
                                /* move forward only if the new size was non-zero */
                                if (new_map[new_entry].size != 0)
                                        if (++new_entry >= BFIN_MEMMAP_MAX)
                                                break;  /* no more space left for new entries */
                        }
                        if (current_type != 0) {
                                new_map[new_entry].addr = change_point[chgidx]->addr;
                                new_map[new_entry].type = current_type;
                                last_addr = change_point[chgidx]->addr;
                        }
                        last_type = current_type;
                }
        }
        new_nr = new_entry;     /* retain count for new entries */

        /* copy new mapping into original location */
        memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
        *pnr_map = new_nr;

        return 0;
}

static void __init print_memory_map(char *who)
{
        int i;

        for (i = 0; i < bfin_memmap.nr_map; i++) {
                printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
                        bfin_memmap.map[i].addr,
                        bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
                switch (bfin_memmap.map[i].type) {
                case BFIN_MEMMAP_RAM:
                                printk("(usable)\n");
                                break;
                case BFIN_MEMMAP_RESERVED:
                                printk("(reserved)\n");
                                break;
                default:        printk("type %lu\n", bfin_memmap.map[i].type);
                                break;
                }
        }
}

static __init int parse_memmap(char *arg)
{
        unsigned long long start_at, mem_size;

        if (!arg)
                return -EINVAL;

        mem_size = memparse(arg, &arg);
        if (*arg == '@') {
                start_at = memparse(arg+1, &arg);
                add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
        } else if (*arg == '$') {
                start_at = memparse(arg+1, &arg);
                add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
        }

        return 0;
}

/*
 * Initial parsing of the command line.  Currently, we support:
 *  - Controlling the linux memory size: mem=xxx[KMG]
 *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
 *       $ -> reserved memory is dcacheable
 *       # -> reserved memory is icacheable
 *  - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
 *       @ from <start> to <start>+<mem>, type RAM
 *       $ from <start> to <start>+<mem>, type RESERVED
 */
static __init void parse_cmdline_early(char *cmdline_p)
{
        char c = ' ', *to = cmdline_p;
        unsigned int memsize;
        for (;;) {
                if (c == ' ') {
                        if (!memcmp(to, "mem=", 4)) {
                                to += 4;
                                memsize = memparse(to, &to);
                                if (memsize)
                                        _ramend = memsize;

                        } else if (!memcmp(to, "max_mem=", 8)) {
                                to += 8;
                                memsize = memparse(to, &to);
                                if (memsize) {
                                        physical_mem_end = memsize;
                                        if (*to != ' ') {
                                                if (*to == '$'
                                                    || *(to + 1) == '$')
                                                        reserved_mem_dcache_on = 1;
                                                if (*to == '#'
                                                    || *(to + 1) == '#')
                                                        reserved_mem_icache_on = 1;
                                        }
                                }
                        } else if (!memcmp(to, "clkin_hz=", 9)) {
                                to += 9;
                                early_init_clkin_hz(to);
                        } else if (!memcmp(to, "earlyprintk=", 12)) {
                                to += 12;
                                setup_early_printk(to);
                        } else if (!memcmp(to, "memmap=", 7)) {
                                to += 7;
                                parse_memmap(to);
                        }
                }
                c = *(to++);
                if (!c)
                        break;
        }
}

/*
 * Setup memory defaults from user config.
 * The physical memory layout looks like:
 *
 *  [_rambase, _ramstart]:              kernel image
 *  [memory_start, memory_end]:         dynamic memory managed by kernel
 *  [memory_end, _ramend]:              reserved memory
 *      [memory_mtd_start(memory_end),
 *              memory_mtd_start + mtd_size]:   rootfs (if any)
 *      [_ramend - DMA_UNCACHED_REGION,
 *              _ramend]:                       uncached DMA region
 *  [_ramend, physical_mem_end]:        memory not managed by kernel
 */
static __init void memory_setup(void)
{
#ifdef CONFIG_MTD_UCLINUX
        unsigned long mtd_phys = 0;
#endif

        _rambase = (unsigned long)_stext;
        _ramstart = (unsigned long)_end;

        if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
                console_init();
                panic("DMA region exceeds memory limit: %lu.",
                        _ramend - _ramstart);
        }
        memory_end = _ramend - DMA_UNCACHED_REGION;

#ifdef CONFIG_MPU
        /* Round up to multiple of 4MB */
        memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
#else
        memory_start = PAGE_ALIGN(_ramstart);
#endif

#if defined(CONFIG_MTD_UCLINUX)
        /* generic memory mapped MTD driver */
        memory_mtd_end = memory_end;

        mtd_phys = _ramstart;
        mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));

# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
        if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
                mtd_size =
                    PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
# endif

# if defined(CONFIG_CRAMFS)
        if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
                mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
# endif

# if defined(CONFIG_ROMFS_FS)
        if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
            && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
                mtd_size =
                    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
#  if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
        /* Due to a Hardware Anomaly we need to limit the size of usable
         * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
         * 05000263 - Hardware loop corrupted when taking an ICPLB exception
         */
#   if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
        if (memory_end >= 56 * 1024 * 1024)
                memory_end = 56 * 1024 * 1024;
#   else
        if (memory_end >= 60 * 1024 * 1024)
                memory_end = 60 * 1024 * 1024;
#   endif                               /* CONFIG_DEBUG_HUNT_FOR_ZERO */
#  endif                                /* ANOMALY_05000263 */
# endif                         /* CONFIG_ROMFS_FS */

        memory_end -= mtd_size;

        if (mtd_size == 0) {
                console_init();
                panic("Don't boot kernel without rootfs attached.");
        }

        /* Relocate MTD image to the top of memory after the uncached memory area */
        uclinux_ram_map.phys = memory_mtd_start = memory_end;
        uclinux_ram_map.size = mtd_size;
        dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif                          /* CONFIG_MTD_UCLINUX */

#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
        /* Due to a Hardware Anomaly we need to limit the size of usable
         * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
         * 05000263 - Hardware loop corrupted when taking an ICPLB exception
         */
#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
        if (memory_end >= 56 * 1024 * 1024)
                memory_end = 56 * 1024 * 1024;
#else
        if (memory_end >= 60 * 1024 * 1024)
                memory_end = 60 * 1024 * 1024;
#endif                          /* CONFIG_DEBUG_HUNT_FOR_ZERO */
        printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
#endif                          /* ANOMALY_05000263 */

#ifdef CONFIG_MPU
        page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
        page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
#endif

#if !defined(CONFIG_MTD_UCLINUX)
        /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
        memory_end -= SIZE_4K;
#endif

        init_mm.start_code = (unsigned long)_stext;
        init_mm.end_code = (unsigned long)_etext;
        init_mm.end_data = (unsigned long)_edata;
        init_mm.brk = (unsigned long)0;

        printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
        printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);

        printk(KERN_INFO "Memory map:\n"
                KERN_INFO "  fixedcode = 0x%p-0x%p\n"
                KERN_INFO "  text      = 0x%p-0x%p\n"
                KERN_INFO "  rodata    = 0x%p-0x%p\n"
                KERN_INFO "  bss       = 0x%p-0x%p\n"
                KERN_INFO "  data      = 0x%p-0x%p\n"
                KERN_INFO "    stack   = 0x%p-0x%p\n"
                KERN_INFO "  init      = 0x%p-0x%p\n"
                KERN_INFO "  available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
                KERN_INFO "  rootfs    = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
                KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
#endif
                , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
                _stext, _etext,
                __start_rodata, __end_rodata,
                __bss_start, __bss_stop,
                _sdata, _edata,
                (void *)&init_thread_union,
                (void *)((int)(&init_thread_union) + 0x2000),
                __init_begin, __init_end,
                (void *)_ramstart, (void *)memory_end
#ifdef CONFIG_MTD_UCLINUX
                , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
#endif
#if DMA_UNCACHED_REGION > 0
                , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
#endif
                );
}

/*
 * Find the lowest, highest page frame number we have available
 */
void __init find_min_max_pfn(void)
{
        int i;

        max_pfn = 0;
        min_low_pfn = memory_end;

        for (i = 0; i < bfin_memmap.nr_map; i++) {
                unsigned long start, end;
                /* RAM? */
                if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
                        continue;
                start = PFN_UP(bfin_memmap.map[i].addr);
                end = PFN_DOWN(bfin_memmap.map[i].addr +
                                bfin_memmap.map[i].size);
                if (start >= end)
                        continue;
                if (end > max_pfn)
                        max_pfn = end;
                if (start < min_low_pfn)
                        min_low_pfn = start;
        }
}

static __init void setup_bootmem_allocator(void)
{
        int bootmap_size;
        int i;
        unsigned long start_pfn, end_pfn;
        unsigned long curr_pfn, last_pfn, size;

        /* mark memory between memory_start and memory_end usable */
        add_memory_region(memory_start,
                memory_end - memory_start, BFIN_MEMMAP_RAM);
        /* sanity check for overlap */
        sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
        print_memory_map("boot memmap");

        /* intialize globals in linux/bootmem.h */
        find_min_max_pfn();
        /* pfn of the last usable page frame */
        if (max_pfn > memory_end >> PAGE_SHIFT)
                max_pfn = memory_end >> PAGE_SHIFT;
        /* pfn of last page frame directly mapped by kernel */
        max_low_pfn = max_pfn;
        /* pfn of the first usable page frame after kernel image*/
        if (min_low_pfn < memory_start >> PAGE_SHIFT)
                min_low_pfn = memory_start >> PAGE_SHIFT;

        start_pfn = PAGE_OFFSET >> PAGE_SHIFT;
        end_pfn = memory_end >> PAGE_SHIFT;

        /*
         * give all the memory to the bootmap allocator, tell it to put the
         * boot mem_map at the start of memory.
         */
        bootmap_size = init_bootmem_node(NODE_DATA(0),
                        memory_start >> PAGE_SHIFT,     /* map goes here */
                        start_pfn, end_pfn);

        /* register the memmap regions with the bootmem allocator */
        for (i = 0; i < bfin_memmap.nr_map; i++) {
                /*
                 * Reserve usable memory
                 */
                if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
                        continue;
                /*
                 * We are rounding up the start address of usable memory:
                 */
                curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
                if (curr_pfn >= end_pfn)
                        continue;
                /*
                 * ... and at the end of the usable range downwards:
                 */
                last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
                                         bfin_memmap.map[i].size);

                if (last_pfn > end_pfn)
                        last_pfn = end_pfn;

                /*
                 * .. finally, did all the rounding and playing
                 * around just make the area go away?
                 */
                if (last_pfn <= curr_pfn)
                        continue;

                size = last_pfn - curr_pfn;
                free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
        }

        /* reserve memory before memory_start, including bootmap */
        reserve_bootmem(PAGE_OFFSET,
                memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET,
                BOOTMEM_DEFAULT);
}

#define EBSZ_TO_MEG(ebsz) \
({ \
        int meg = 0; \
        switch (ebsz & 0xf) { \
                case 0x1: meg =  16; break; \
                case 0x3: meg =  32; break; \
                case 0x5: meg =  64; break; \
                case 0x7: meg = 128; break; \
                case 0x9: meg = 256; break; \
                case 0xb: meg = 512; break; \
        } \
        meg; \
})
static inline int __init get_mem_size(void)
{
#if defined(EBIU_SDBCTL)
# if defined(BF561_FAMILY)
        int ret = 0;
        u32 sdbctl = bfin_read_EBIU_SDBCTL();
        ret += EBSZ_TO_MEG(sdbctl >>  0);
        ret += EBSZ_TO_MEG(sdbctl >>  8);
        ret += EBSZ_TO_MEG(sdbctl >> 16);
        ret += EBSZ_TO_MEG(sdbctl >> 24);
        return ret;
# else
        return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
# endif
#elif defined(EBIU_DDRCTL1)
        u32 ddrctl = bfin_read_EBIU_DDRCTL1();
        int ret = 0;
        switch (ddrctl & 0xc0000) {
                case DEVSZ_64:  ret = 64 / 8;
                case DEVSZ_128: ret = 128 / 8;
                case DEVSZ_256: ret = 256 / 8;
                case DEVSZ_512: ret = 512 / 8;
        }
        switch (ddrctl & 0x30000) {
                case DEVWD_4:  ret *= 2;
                case DEVWD_8:  ret *= 2;
                case DEVWD_16: break;
        }
        if ((ddrctl & 0xc000) == 0x4000)
                ret *= 2;
        return ret;
#endif
        BUG();
}

void __init setup_arch(char **cmdline_p)
{
        unsigned long sclk, cclk;

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

#if defined(CONFIG_CMDLINE_BOOL)
        strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
        command_line[sizeof(command_line) - 1] = 0;
#endif

        /* Keep a copy of command line */
        *cmdline_p = &command_line[0];
        memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
        boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';

        /* setup memory defaults from the user config */
        physical_mem_end = 0;
        _ramend = get_mem_size() * 1024 * 1024;

        memset(&bfin_memmap, 0, sizeof(bfin_memmap));

        parse_cmdline_early(&command_line[0]);

        if (physical_mem_end == 0)
                physical_mem_end = _ramend;

        memory_setup();

        /* Initialize Async memory banks */
        bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
        bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
        bfin_write_EBIU_AMGCTL(AMGCTLVAL);
#ifdef CONFIG_EBIU_MBSCTLVAL
        bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
        bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
        bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
#endif

        cclk = get_cclk();
        sclk = get_sclk();

        if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
                panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");

#ifdef BF561_FAMILY
        if (ANOMALY_05000266) {
                bfin_read_IMDMA_D0_IRQ_STATUS();
                bfin_read_IMDMA_D1_IRQ_STATUS();
        }
#endif
        printk(KERN_INFO "Hardware Trace ");
        if (bfin_read_TBUFCTL() & 0x1)
                printk("Active ");
        else
                printk("Off ");
        if (bfin_read_TBUFCTL() & 0x2)
                printk("and Enabled\n");
        else
        printk("and Disabled\n");

#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
        /* we need to initialize the Flashrom device here since we might
         * do things with flash early on in the boot
         */
        flash_probe();
#endif

        printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);

        /* Newer parts mirror SWRST bits in SYSCR */
#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
    defined(CONFIG_BF538) || defined(CONFIG_BF539)
        _bfin_swrst = bfin_read_SWRST();
#else
        _bfin_swrst = bfin_read_SYSCR();
#endif

#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
        bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
        bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
#endif

#ifdef CONFIG_SMP
        if (_bfin_swrst & SWRST_DBL_FAULT_A) {
#else
        if (_bfin_swrst & RESET_DOUBLE) {
#endif
                printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT
                /* We assume the crashing kernel, and the current symbol table match */
                printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
                        (int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
                printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
                printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
#endif
                printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
                        init_retx);
        } else if (_bfin_swrst & RESET_WDOG)
                printk(KERN_INFO "Recovering from Watchdog event\n");
        else if (_bfin_swrst & RESET_SOFTWARE)
                printk(KERN_NOTICE "Reset caused by Software reset\n");

        printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
        if (bfin_compiled_revid() == 0xffff)
                printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
        else if (bfin_compiled_revid() == -1)
                printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
        else
                printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());

        if (unlikely(CPUID != bfin_cpuid()))
                printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
                        CPU, bfin_cpuid(), bfin_revid());
        else {
                if (bfin_revid() != bfin_compiled_revid()) {
                        if (bfin_compiled_revid() == -1)
                                printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
                                       bfin_revid());
                        else if (bfin_compiled_revid() != 0xffff) {
                                printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
                                       bfin_compiled_revid(), bfin_revid());
                                if (bfin_compiled_revid() > bfin_revid())
                                        panic("Error: you are missing anomaly workarounds for this rev");
                        }
                }
                if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
                        printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
                               CPU, bfin_revid());
        }

        /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
        if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
                panic("You can't run on this processor due to 05000448");

        printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");

        printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
               cclk / 1000000, sclk / 1000000);

        setup_bootmem_allocator();

        paging_init();

        /* Copy atomic sequences to their fixed location, and sanity check that
           these locations are the ones that we advertise to userspace.  */
        memcpy((void *)FIXED_CODE_START, &fixed_code_start,
               FIXED_CODE_END - FIXED_CODE_START);
        BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
               != SIGRETURN_STUB - FIXED_CODE_START);
        BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
               != ATOMIC_XCHG32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
               != ATOMIC_CAS32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
               != ATOMIC_ADD32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
               != ATOMIC_SUB32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
               != ATOMIC_IOR32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
               != ATOMIC_AND32 - FIXED_CODE_START);
        BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
               != ATOMIC_XOR32 - FIXED_CODE_START);
        BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
                != SAFE_USER_INSTRUCTION - FIXED_CODE_START);

#ifdef CONFIG_SMP
        platform_init_cpus();
#endif
        init_exception_vectors();
        bfin_cache_init();      /* Initialize caches for the boot CPU */
}

static int __init topology_init(void)
{
        unsigned int cpu;
        /* Record CPU-private information for the boot processor. */
        bfin_setup_cpudata(0);

        for_each_possible_cpu(cpu) {
                register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
        }

        return 0;
}

subsys_initcall(topology_init);

/* Get the input clock frequency */
static u_long cached_clkin_hz = CONFIG_CLKIN_HZ;
static u_long get_clkin_hz(void)
{
        return cached_clkin_hz;
}
static int __init early_init_clkin_hz(char *buf)
{
        cached_clkin_hz = simple_strtoul(buf, NULL, 0);
#ifdef BFIN_KERNEL_CLOCK
        if (cached_clkin_hz != CONFIG_CLKIN_HZ)
                panic("cannot change clkin_hz when reprogramming clocks");
#endif
        return 1;
}
early_param("clkin_hz=", early_init_clkin_hz);

/* Get the voltage input multiplier */
static u_long get_vco(void)
{
        static u_long cached_vco;
        u_long msel, pll_ctl;

        /* The assumption here is that VCO never changes at runtime.
         * If, someday, we support that, then we'll have to change this.
         */
        if (cached_vco)
                return cached_vco;

        pll_ctl = bfin_read_PLL_CTL();
        msel = (pll_ctl >> 9) & 0x3F;
        if (0 == msel)
                msel = 64;

        cached_vco = get_clkin_hz();
        cached_vco >>= (1 & pll_ctl);   /* DF bit */
        cached_vco *= msel;
        return cached_vco;
}

/* Get the Core clock */
u_long get_cclk(void)
{
        static u_long cached_cclk_pll_div, cached_cclk;
        u_long csel, ssel;

        if (bfin_read_PLL_STAT() & 0x1)
                return get_clkin_hz();

        ssel = bfin_read_PLL_DIV();
        if (ssel == cached_cclk_pll_div)
                return cached_cclk;
        else
                cached_cclk_pll_div = ssel;

        csel = ((ssel >> 4) & 0x03);
        ssel &= 0xf;
        if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
                cached_cclk = get_vco() / ssel;
        else
                cached_cclk = get_vco() >> csel;
        return cached_cclk;
}
EXPORT_SYMBOL(get_cclk);

/* Get the System clock */
u_long get_sclk(void)
{
        static u_long cached_sclk;
        u_long ssel;

        /* The assumption here is that SCLK never changes at runtime.
         * If, someday, we support that, then we'll have to change this.
         */
        if (cached_sclk)
                return cached_sclk;

        if (bfin_read_PLL_STAT() & 0x1)
                return get_clkin_hz();

        ssel = bfin_read_PLL_DIV() & 0xf;
        if (0 == ssel) {
                printk(KERN_WARNING "Invalid System Clock\n");
                ssel = 1;
        }

        cached_sclk = get_vco() / ssel;
        return cached_sclk;
}
EXPORT_SYMBOL(get_sclk);

unsigned long sclk_to_usecs(unsigned long sclk)
{
        u64 tmp = USEC_PER_SEC * (u64)sclk;
        do_div(tmp, get_sclk());
        return tmp;
}
EXPORT_SYMBOL(sclk_to_usecs);

unsigned long usecs_to_sclk(unsigned long usecs)
{
        u64 tmp = get_sclk() * (u64)usecs;
        do_div(tmp, USEC_PER_SEC);
        return tmp;
}
EXPORT_SYMBOL(usecs_to_sclk);

/*
 *      Get CPU information for use by the procfs.
 */
static int show_cpuinfo(struct seq_file *m, void *v)
{
        char *cpu, *mmu, *fpu, *vendor, *cache;
        uint32_t revid;
        int cpu_num = *(unsigned int *)v;
        u_long sclk, cclk;
        u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
        struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num);

        cpu = CPU;
        mmu = "none";
        fpu = "none";
        revid = bfin_revid();

        sclk = get_sclk();
        cclk = get_cclk();

        switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
        case 0xca:
                vendor = "Analog Devices";
                break;
        default:
                vendor = "unknown";
                break;
        }

        seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor);

        if (CPUID == bfin_cpuid())
                seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
        else
                seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
                        CPUID, bfin_cpuid());

        seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
                "stepping\t: %d\n",
                cpu, cclk/1000000, sclk/1000000,
#ifdef CONFIG_MPU
                "mpu on",
#else
                "mpu off",
#endif
                revid);

        seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
                cclk/1000000, cclk%1000000,
                sclk/1000000, sclk%1000000);
        seq_printf(m, "bogomips\t: %lu.%02lu\n"
                "Calibration\t: %lu loops\n",
                (cpudata->loops_per_jiffy * HZ) / 500000,
                ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
                (cpudata->loops_per_jiffy * HZ));

        /* Check Cache configutation */
        switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
        case ACACHE_BSRAM:
                cache = "dbank-A/B\t: cache/sram";
                dcache_size = 16;
                dsup_banks = 1;
                break;
        case ACACHE_BCACHE:
                cache = "dbank-A/B\t: cache/cache";
                dcache_size = 32;
                dsup_banks = 2;
                break;
        case ASRAM_BSRAM:
                cache = "dbank-A/B\t: sram/sram";
                dcache_size = 0;
                dsup_banks = 0;
                break;
        default:
                cache = "unknown";
                dcache_size = 0;
                dsup_banks = 0;
                break;
        }

        /* Is it turned on? */
        if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
                dcache_size = 0;

        if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB))
                icache_size = 0;

        seq_printf(m, "cache size\t: %d KB(L1 icache) "
                "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
                icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
                "-wb"
#elif defined CONFIG_BFIN_WT
                "-wt"
#endif
                "", 0);

        seq_printf(m, "%s\n", cache);

        if (icache_size)
                seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
                           BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
        else
                seq_printf(m, "icache setup\t: off\n");

        seq_printf(m,
                   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
                   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
                   BFIN_DLINES);
#ifdef __ARCH_SYNC_CORE_DCACHE
        seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
#endif
#ifdef CONFIG_BFIN_ICACHE_LOCK
        switch ((cpudata->imemctl >> 3) & WAYALL_L) {
        case WAY0_L:
                seq_printf(m, "Way0 Locked-Down\n");
                break;
        case WAY1_L:
                seq_printf(m, "Way1 Locked-Down\n");
                break;
        case WAY01_L:
                seq_printf(m, "Way0,Way1 Locked-Down\n");
                break;
        case WAY2_L:
                seq_printf(m, "Way2 Locked-Down\n");
                break;
        case WAY02_L:
                seq_printf(m, "Way0,Way2 Locked-Down\n");
                break;
        case WAY12_L:
                seq_printf(m, "Way1,Way2 Locked-Down\n");
                break;
        case WAY012_L:
                seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
                break;
        case WAY3_L:
                seq_printf(m, "Way3 Locked-Down\n");
                break;
        case WAY03_L:
                seq_printf(m, "Way0,Way3 Locked-Down\n");
                break;
        case WAY13_L:
                seq_printf(m, "Way1,Way3 Locked-Down\n");
                break;
        case WAY013_L:
                seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
                break;
        case WAY32_L:
                seq_printf(m, "Way3,Way2 Locked-Down\n");
                break;
        case WAY320_L:
                seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
                break;
        case WAY321_L:
                seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
                break;
        case WAYALL_L:
                seq_printf(m, "All Ways are locked\n");
                break;
        default:
                seq_printf(m, "No Ways are locked\n");
        }
#endif

        if (cpu_num != num_possible_cpus() - 1)
                return 0;

        if (L2_LENGTH)
                seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
        seq_printf(m, "board name\t: %s\n", bfin_board_name);
        seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
                 physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
        seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
                ((int)memory_end - (int)_stext) >> 10,
                _stext,
                (void *)memory_end);
        seq_printf(m, "\n");

        return 0;
}

static void *c_start(struct seq_file *m, loff_t *pos)
{
        if (*pos == 0)
                *pos = first_cpu(cpu_online_map);
        if (*pos >= num_online_cpus())
                return NULL;

        return pos;
}

static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
        *pos = next_cpu(*pos, cpu_online_map);

        return c_start(m, pos);
}

static void c_stop(struct seq_file *m, void *v)
{
}

const struct seq_operations cpuinfo_op = {
        .start = c_start,
        .next = c_next,
        .stop = c_stop,
        .show = show_cpuinfo,
};

void __init cmdline_init(const char *r0)
{
        if (r0)
                strncpy(command_line, r0, COMMAND_LINE_SIZE);
}