arch/arm/mach-pxa/saar.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/saar.c
   3  *
   4  *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
   5  *
   6  *  Copyright (C) 2007-2008 Marvell International Ltd.
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  publishhed by the Free Software Foundation.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/clk.h>
  19 #include <linux/gpio.h>
  20 #include <linux/delay.h>
  21 #include <linux/fb.h>
  22 #include <linux/i2c.h>
  23 #include <linux/smc91x.h>
  24 #include <linux/mfd/da903x.h>
  25 #include <linux/mtd/mtd.h>
  26 #include <linux/mtd/partitions.h>
  27 #include <linux/mtd/onenand.h>
  28
  29 #include <asm/mach-types.h>
  30 #include <asm/mach/arch.h>
  31 #include <asm/mach/flash.h>
  32
  33 #include <mach/pxa930.h>
  34 #include <plat/i2c.h>
  35 #include <mach/pxafb.h>
  36
  37 #include "devices.h"
  38 #include "generic.h"
  39
  40 #define GPIO_LCD_RESET          (16)
  41
  42 /* SAAR MFP configurations */
  43 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
  44         /* LCD */
  45         GPIO23_LCD_DD0,
  46         GPIO24_LCD_DD1,
  47         GPIO25_LCD_DD2,
  48         GPIO26_LCD_DD3,
  49         GPIO27_LCD_DD4,
  50         GPIO28_LCD_DD5,
  51         GPIO29_LCD_DD6,
  52         GPIO44_LCD_DD7,
  53         GPIO21_LCD_CS,
  54         GPIO22_LCD_VSYNC,
  55         GPIO17_LCD_FCLK_RD,
  56         GPIO18_LCD_LCLK_A0,
  57         GPIO19_LCD_PCLK_WR,
  58         GPIO16_GPIO, /* LCD reset */
  59
  60         /* Ethernet */
  61         DF_nCS1_nCS3,
  62         GPIO97_GPIO,
  63
  64         /* DFI */
  65         DF_INT_RnB_ND_INT_RnB,
  66         DF_nRE_nOE_ND_nRE,
  67         DF_nWE_ND_nWE,
  68         DF_CLE_nOE_ND_CLE,
  69         DF_nADV1_ALE_ND_ALE,
  70         DF_nADV2_ALE_nCS3,
  71         DF_nCS0_ND_nCS0,
  72         DF_IO0_ND_IO0,
  73         DF_IO1_ND_IO1,
  74         DF_IO2_ND_IO2,
  75         DF_IO3_ND_IO3,
  76         DF_IO4_ND_IO4,
  77         DF_IO5_ND_IO5,
  78         DF_IO6_ND_IO6,
  79         DF_IO7_ND_IO7,
  80         DF_IO8_ND_IO8,
  81         DF_IO9_ND_IO9,
  82         DF_IO10_ND_IO10,
  83         DF_IO11_ND_IO11,
  84         DF_IO12_ND_IO12,
  85         DF_IO13_ND_IO13,
  86         DF_IO14_ND_IO14,
  87         DF_IO15_ND_IO15,
  88 };
  89
  90 #define SAAR_ETH_PHYS   (0x14000000)
  91
  92 static struct resource smc91x_resources[] = {
  93         [0] = {
  94                 .start  = (SAAR_ETH_PHYS + 0x300),
  95                 .end    = (SAAR_ETH_PHYS + 0xfffff),
  96                 .flags  = IORESOURCE_MEM,
  97         },
  98         [1] = {
  99                 .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
 100                 .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
 101                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 102         }
 103 };
 104
 105 static struct smc91x_platdata saar_smc91x_info = {
 106         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
 107 };
 108
 109 static struct platform_device smc91x_device = {
 110         .name           = "smc91x",
 111         .id             = 0,
 112         .num_resources  = ARRAY_SIZE(smc91x_resources),
 113         .resource       = smc91x_resources,
 114         .dev            = {
 115                 .platform_data = &saar_smc91x_info,
 116         },
 117 };
 118
 119 #if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
 120 static uint16_t lcd_power_on[] = {
 121         /* single frame */
 122         SMART_CMD_NOOP,
 123         SMART_CMD(0x00),
 124         SMART_DELAY(0),
 125
 126         SMART_CMD_NOOP,
 127         SMART_CMD(0x00),
 128         SMART_DELAY(0),
 129
 130         SMART_CMD_NOOP,
 131         SMART_CMD(0x00),
 132         SMART_DELAY(0),
 133
 134         SMART_CMD_NOOP,
 135         SMART_CMD(0x00),
 136         SMART_DELAY(10),
 137
 138         /* calibration control */
 139         SMART_CMD(0x00),
 140         SMART_CMD(0xA4),
 141         SMART_DAT(0x80),
 142         SMART_DAT(0x01),
 143         SMART_DELAY(150),
 144
 145         /*Power-On Init sequence*/
 146         SMART_CMD(0x00),        /* output ctrl */
 147         SMART_CMD(0x01),
 148         SMART_DAT(0x01),
 149         SMART_DAT(0x00),
 150         SMART_CMD(0x00),        /* wave ctrl */
 151         SMART_CMD(0x02),
 152         SMART_DAT(0x07),
 153         SMART_DAT(0x00),
 154         SMART_CMD(0x00),
 155         SMART_CMD(0x03),        /* entry mode */
 156         SMART_DAT(0xD0),
 157         SMART_DAT(0x30),
 158         SMART_CMD(0x00),
 159         SMART_CMD(0x08),        /* display ctrl 2 */
 160         SMART_DAT(0x08),
 161         SMART_DAT(0x08),
 162         SMART_CMD(0x00),
 163         SMART_CMD(0x09),        /* display ctrl 3 */
 164         SMART_DAT(0x04),
 165         SMART_DAT(0x2F),
 166         SMART_CMD(0x00),
 167         SMART_CMD(0x0A),        /* display ctrl 4 */
 168         SMART_DAT(0x00),
 169         SMART_DAT(0x08),
 170         SMART_CMD(0x00),
 171         SMART_CMD(0x0D),        /* Frame Marker position */
 172         SMART_DAT(0x00),
 173         SMART_DAT(0x08),
 174         SMART_CMD(0x00),
 175         SMART_CMD(0x60),        /* Driver output control */
 176         SMART_DAT(0x27),
 177         SMART_DAT(0x00),
 178         SMART_CMD(0x00),
 179         SMART_CMD(0x61),        /* Base image display control */
 180         SMART_DAT(0x00),
 181         SMART_DAT(0x01),
 182         SMART_CMD(0x00),
 183         SMART_CMD(0x30),        /* Y settings 30h-3Dh */
 184         SMART_DAT(0x07),
 185         SMART_DAT(0x07),
 186         SMART_CMD(0x00),
 187         SMART_CMD(0x31),
 188         SMART_DAT(0x00),
 189         SMART_DAT(0x07),
 190         SMART_CMD(0x00),
 191         SMART_CMD(0x32),        /* Timing(3), ASW HOLD=0.5CLK */
 192         SMART_DAT(0x04),
 193         SMART_DAT(0x00),
 194         SMART_CMD(0x00),
 195         SMART_CMD(0x33),        /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
 196         SMART_DAT(0x03),
 197         SMART_DAT(0x03),
 198         SMART_CMD(0x00),
 199         SMART_CMD(0x34),
 200         SMART_DAT(0x00),
 201         SMART_DAT(0x00),
 202         SMART_CMD(0x00),
 203         SMART_CMD(0x35),
 204         SMART_DAT(0x02),
 205         SMART_DAT(0x05),
 206         SMART_CMD(0x00),
 207         SMART_CMD(0x36),
 208         SMART_DAT(0x1F),
 209         SMART_DAT(0x1F),
 210         SMART_CMD(0x00),
 211         SMART_CMD(0x37),
 212         SMART_DAT(0x07),
 213         SMART_DAT(0x07),
 214         SMART_CMD(0x00),
 215         SMART_CMD(0x38),
 216         SMART_DAT(0x00),
 217         SMART_DAT(0x07),
 218         SMART_CMD(0x00),
 219         SMART_CMD(0x39),
 220         SMART_DAT(0x04),
 221         SMART_DAT(0x00),
 222         SMART_CMD(0x00),
 223         SMART_CMD(0x3A),
 224         SMART_DAT(0x03),
 225         SMART_DAT(0x03),
 226         SMART_CMD(0x00),
 227         SMART_CMD(0x3B),
 228         SMART_DAT(0x00),
 229         SMART_DAT(0x00),
 230         SMART_CMD(0x00),
 231         SMART_CMD(0x3C),
 232         SMART_DAT(0x02),
 233         SMART_DAT(0x05),
 234         SMART_CMD(0x00),
 235         SMART_CMD(0x3D),
 236         SMART_DAT(0x1F),
 237         SMART_DAT(0x1F),
 238         SMART_CMD(0x00),        /* Display control 1 */
 239         SMART_CMD(0x07),
 240         SMART_DAT(0x00),
 241         SMART_DAT(0x01),
 242         SMART_CMD(0x00),        /* Power control 5 */
 243         SMART_CMD(0x17),
 244         SMART_DAT(0x00),
 245         SMART_DAT(0x01),
 246         SMART_CMD(0x00),        /* Power control 1 */
 247         SMART_CMD(0x10),
 248         SMART_DAT(0x10),
 249         SMART_DAT(0xB0),
 250         SMART_CMD(0x00),        /* Power control 2 */
 251         SMART_CMD(0x11),
 252         SMART_DAT(0x01),
 253         SMART_DAT(0x30),
 254         SMART_CMD(0x00),        /* Power control 3 */
 255         SMART_CMD(0x12),
 256         SMART_DAT(0x01),
 257         SMART_DAT(0x9E),
 258         SMART_CMD(0x00),        /* Power control 4 */
 259         SMART_CMD(0x13),
 260         SMART_DAT(0x17),
 261         SMART_DAT(0x00),
 262         SMART_CMD(0x00),        /* Power control 3 */
 263         SMART_CMD(0x12),
 264         SMART_DAT(0x01),
 265         SMART_DAT(0xBE),
 266         SMART_DELAY(100),
 267
 268         /* display mode : 240*320 */
 269         SMART_CMD(0x00),        /* RAM address set(H) 0*/
 270         SMART_CMD(0x20),
 271         SMART_DAT(0x00),
 272         SMART_DAT(0x00),
 273         SMART_CMD(0x00),        /* RAM address set(V)   4*/
 274         SMART_CMD(0x21),
 275         SMART_DAT(0x00),
 276         SMART_DAT(0x00),
 277         SMART_CMD(0x00),        /* Start of Window RAM address set(H) 8*/
 278         SMART_CMD(0x50),
 279         SMART_DAT(0x00),
 280         SMART_DAT(0x00),
 281         SMART_CMD(0x00),        /* End of Window RAM address set(H) 12*/
 282         SMART_CMD(0x51),
 283         SMART_DAT(0x00),
 284         SMART_DAT(0xEF),
 285         SMART_CMD(0x00),        /* Start of Window RAM address set(V) 16*/
 286         SMART_CMD(0x52),
 287         SMART_DAT(0x00),
 288         SMART_DAT(0x00),
 289         SMART_CMD(0x00),        /* End of Window RAM address set(V) 20*/
 290         SMART_CMD(0x53),
 291         SMART_DAT(0x01),
 292         SMART_DAT(0x3F),
 293         SMART_CMD(0x00),        /* Panel interface control 1 */
 294         SMART_CMD(0x90),
 295         SMART_DAT(0x00),
 296         SMART_DAT(0x1A),
 297         SMART_CMD(0x00),        /* Panel interface control 2 */
 298         SMART_CMD(0x92),
 299         SMART_DAT(0x04),
 300         SMART_DAT(0x00),
 301         SMART_CMD(0x00),        /* Panel interface control 3 */
 302         SMART_CMD(0x93),
 303         SMART_DAT(0x00),
 304         SMART_DAT(0x05),
 305         SMART_DELAY(20),
 306 };
 307
 308 static uint16_t lcd_panel_on[] = {
 309         SMART_CMD(0x00),
 310         SMART_CMD(0x07),
 311         SMART_DAT(0x00),
 312         SMART_DAT(0x21),
 313         SMART_DELAY(1),
 314
 315         SMART_CMD(0x00),
 316         SMART_CMD(0x07),
 317         SMART_DAT(0x00),
 318         SMART_DAT(0x61),
 319         SMART_DELAY(100),
 320
 321         SMART_CMD(0x00),
 322         SMART_CMD(0x07),
 323         SMART_DAT(0x01),
 324         SMART_DAT(0x73),
 325         SMART_DELAY(1),
 326 };
 327
 328 static uint16_t lcd_panel_off[] = {
 329         SMART_CMD(0x00),
 330         SMART_CMD(0x07),
 331         SMART_DAT(0x00),
 332         SMART_DAT(0x72),
 333         SMART_DELAY(40),
 334
 335         SMART_CMD(0x00),
 336         SMART_CMD(0x07),
 337         SMART_DAT(0x00),
 338         SMART_DAT(0x01),
 339         SMART_DELAY(1),
 340
 341         SMART_CMD(0x00),
 342         SMART_CMD(0x07),
 343         SMART_DAT(0x00),
 344         SMART_DAT(0x00),
 345         SMART_DELAY(1),
 346 };
 347
 348 static uint16_t lcd_power_off[] = {
 349         SMART_CMD(0x00),
 350         SMART_CMD(0x10),
 351         SMART_DAT(0x00),
 352         SMART_DAT(0x80),
 353
 354         SMART_CMD(0x00),
 355         SMART_CMD(0x11),
 356         SMART_DAT(0x01),
 357         SMART_DAT(0x60),
 358
 359         SMART_CMD(0x00),
 360         SMART_CMD(0x12),
 361         SMART_DAT(0x01),
 362         SMART_DAT(0xAE),
 363         SMART_DELAY(40),
 364
 365         SMART_CMD(0x00),
 366         SMART_CMD(0x10),
 367         SMART_DAT(0x00),
 368         SMART_DAT(0x00),
 369 };
 370
 371 static uint16_t update_framedata[] = {
 372         /* set display ram: 240*320 */
 373         SMART_CMD(0x00), /* RAM address set(H) 0*/
 374         SMART_CMD(0x20),
 375         SMART_DAT(0x00),
 376         SMART_DAT(0x00),
 377         SMART_CMD(0x00), /* RAM address set(V) 4*/
 378         SMART_CMD(0x21),
 379         SMART_DAT(0x00),
 380         SMART_DAT(0x00),
 381         SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
 382         SMART_CMD(0x50),
 383         SMART_DAT(0x00),
 384         SMART_DAT(0x00),
 385         SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
 386         SMART_CMD(0x51),
 387         SMART_DAT(0x00),
 388         SMART_DAT(0xEF),
 389         SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
 390         SMART_CMD(0x52),
 391         SMART_DAT(0x00),
 392         SMART_DAT(0x00),
 393         SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
 394         SMART_CMD(0x53),
 395         SMART_DAT(0x01),
 396         SMART_DAT(0x3F),
 397
 398         /* wait for vsync cmd before transferring frame data */
 399         SMART_CMD_WAIT_FOR_VSYNC,
 400
 401         /* write ram */
 402         SMART_CMD(0x00),
 403         SMART_CMD(0x22),
 404
 405         /* write frame data */
 406         SMART_CMD_WRITE_FRAME,
 407 };
 408
 409 static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
 410 {
 411         static int pin_requested = 0;
 412         struct fb_info *info = container_of(var, struct fb_info, var);
 413         int err;
 414
 415         if (!pin_requested) {
 416                 err = gpio_request(GPIO_LCD_RESET, "lcd reset");
 417                 if (err) {
 418                         pr_err("failed to request gpio for LCD reset\n");
 419                         return;
 420                 }
 421
 422                 gpio_direction_output(GPIO_LCD_RESET, 0);
 423                 pin_requested = 1;
 424         }
 425
 426         if (on) {
 427                 gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
 428                 gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
 429
 430                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
 431                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
 432         } else {
 433                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
 434                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
 435         }
 436
 437         err = pxafb_smart_flush(info);
 438         if (err)
 439                 pr_err("%s: timed out\n", __func__);
 440 }
 441
 442 static void ltm022a97a_update(struct fb_info *info)
 443 {
 444         pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
 445         pxafb_smart_flush(info);
 446 }
 447
 448 static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
 449         [0] = {
 450                 .xres                   = 240,
 451                 .yres                   = 320,
 452                 .bpp                    = 16,
 453                 .a0csrd_set_hld         = 30,
 454                 .a0cswr_set_hld         = 30,
 455                 .wr_pulse_width         = 30,
 456                 .rd_pulse_width         = 30,
 457                 .op_hold_time           = 30,
 458                 .cmd_inh_time           = 60,
 459
 460                 /* L_LCLK_A0 and L_LCLK_RD active low */
 461                 .sync                   = FB_SYNC_HOR_HIGH_ACT |
 462                                           FB_SYNC_VERT_HIGH_ACT,
 463         },
 464 };
 465
 466 static struct pxafb_mach_info saar_lcd_info = {
 467         .modes                  = toshiba_ltm022a97a_modes,
 468         .num_modes              = 1,
 469         .lcd_conn               = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
 470         .pxafb_lcd_power        = ltm022a97a_lcd_power,
 471         .smart_update           = ltm022a97a_update,
 472 };
 473
 474 static void __init saar_init_lcd(void)
 475 {
 476         set_pxa_fb_info(&saar_lcd_info);
 477 }
 478 #else
 479 static inline void saar_init_lcd(void) {}
 480 #endif
 481
 482 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
 483 static struct da9034_backlight_pdata saar_da9034_backlight = {
 484         .output_current = 4,    /* 4mA */
 485 };
 486
 487 static struct da903x_subdev_info saar_da9034_subdevs[] = {
 488         [0] = {
 489                 .name           = "da903x-backlight",
 490                 .id             = DA9034_ID_WLED,
 491                 .platform_data  = &saar_da9034_backlight,
 492         },
 493 };
 494
 495 static struct da903x_platform_data saar_da9034_info = {
 496         .num_subdevs    = ARRAY_SIZE(saar_da9034_subdevs),
 497         .subdevs        = saar_da9034_subdevs,
 498 };
 499
 500 static struct i2c_board_info saar_i2c_info[] = {
 501         [0] = {
 502                 .type           = "da9034",
 503                 .addr           = 0x34,
 504                 .platform_data  = &saar_da9034_info,
 505                 .irq            = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
 506         },
 507 };
 508
 509 static void __init saar_init_i2c(void)
 510 {
 511         pxa_set_i2c_info(NULL);
 512         i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
 513 }
 514 #else
 515 static inline void saar_init_i2c(void) {}
 516 #endif
 517
 518 #if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
 519 static struct mtd_partition saar_onenand_partitions[] = {
 520         {
 521                 .name           = "bootloader",
 522                 .offset         = 0,
 523                 .size           = SZ_1M,
 524                 .mask_flags     = MTD_WRITEABLE,
 525         }, {
 526                 .name           = "reserved",
 527                 .offset         = MTDPART_OFS_APPEND,
 528                 .size           = SZ_128K,
 529                 .mask_flags     = MTD_WRITEABLE,
 530         }, {
 531                 .name           = "reserved",
 532                 .offset         = MTDPART_OFS_APPEND,
 533                 .size           = SZ_8M,
 534                 .mask_flags     = MTD_WRITEABLE,
 535         }, {
 536                 .name           = "kernel",
 537                 .offset         = MTDPART_OFS_APPEND,
 538                 .size           = (SZ_2M + SZ_1M),
 539                 .mask_flags     = 0,
 540         }, {
 541                 .name           = "filesystem",
 542                 .offset         = MTDPART_OFS_APPEND,
 543                 .size           = SZ_48M,
 544                 .mask_flags     = 0,
 545         }
 546 };
 547
 548 static struct onenand_platform_data saar_onenand_info = {
 549         .parts          = saar_onenand_partitions,
 550         .nr_parts       = ARRAY_SIZE(saar_onenand_partitions),
 551 };
 552
 553 #define SMC_CS0_PHYS_BASE       (0x10000000)
 554
 555 static struct resource saar_resource_onenand[] = {
 556         [0] = {
 557                 .start  = SMC_CS0_PHYS_BASE,
 558                 .end    = SMC_CS0_PHYS_BASE + SZ_1M,
 559                 .flags  = IORESOURCE_MEM,
 560         },
 561 };
 562
 563 static struct platform_device saar_device_onenand = {
 564         .name           = "onenand-flash",
 565         .id             = -1,
 566         .dev            = {
 567                 .platform_data  = &saar_onenand_info,
 568         },
 569         .resource       = saar_resource_onenand,
 570         .num_resources  = ARRAY_SIZE(saar_resource_onenand),
 571 };
 572
 573 static void __init saar_init_onenand(void)
 574 {
 575         platform_device_register(&saar_device_onenand);
 576 }
 577 #else
 578 static void __init saar_init_onenand(void) {}
 579 #endif
 580
 581 static void __init saar_init(void)
 582 {
 583         /* initialize MFP configurations */
 584         pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 585
 586         pxa_set_ffuart_info(NULL);
 587         pxa_set_btuart_info(NULL);
 588         pxa_set_stuart_info(NULL);
 589
 590         platform_device_register(&smc91x_device);
 591         saar_init_onenand();
 592
 593         saar_init_i2c();
 594         saar_init_lcd();
 595 }
 596
 597 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 598         /* Maintainer: Eric Miao <eric.miao@marvell.com> */
 599         .boot_params    = 0xa0000100,
 600         .map_io         = pxa_map_io,
 601         .init_irq       = pxa3xx_init_irq,
 602         .timer          = &pxa_timer,
 603         .init_machine   = saar_init,
 604 MACHINE_END