arch/arm/kernel/perf_event_v6.c

   1 /*
   2  * ARMv6 Performance counter handling code.
   3  *
   4  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
   5  *
   6  * ARMv6 has 2 configurable performance counters and a single cycle counter.
   7  * They all share a single reset bit but can be written to zero so we can use
   8  * that for a reset.
   9  *
  10  * The counters can't be individually enabled or disabled so when we remove
  11  * one event and replace it with another we could get spurious counts from the
  12  * wrong event. However, we can take advantage of the fact that the
  13  * performance counters can export events to the event bus, and the event bus
  14  * itself can be monitored. This requires that we *don't* export the events to
  15  * the event bus. The procedure for disabling a configurable counter is:
  16  *      - change the counter to count the ETMEXTOUT[0] signal (0x20). This
  17  *        effectively stops the counter from counting.
  18  *      - disable the counter's interrupt generation (each counter has it's
  19  *        own interrupt enable bit).
  20  * Once stopped, the counter value can be written as 0 to reset.
  21  *
  22  * To enable a counter:
  23  *      - enable the counter's interrupt generation.
  24  *      - set the new event type.
  25  *
  26  * Note: the dedicated cycle counter only counts cycles and can't be
  27  * enabled/disabled independently of the others. When we want to disable the
  28  * cycle counter, we have to just disable the interrupt reporting and start
  29  * ignoring that counter. When re-enabling, we have to reset the value and
  30  * enable the interrupt.
  31  */
  32
  33 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
  34 enum armv6_perf_types {
  35         ARMV6_PERFCTR_ICACHE_MISS           = 0x0,
  36         ARMV6_PERFCTR_IBUF_STALL            = 0x1,
  37         ARMV6_PERFCTR_DDEP_STALL            = 0x2,
  38         ARMV6_PERFCTR_ITLB_MISS             = 0x3,
  39         ARMV6_PERFCTR_DTLB_MISS             = 0x4,
  40         ARMV6_PERFCTR_BR_EXEC               = 0x5,
  41         ARMV6_PERFCTR_BR_MISPREDICT         = 0x6,
  42         ARMV6_PERFCTR_INSTR_EXEC            = 0x7,
  43         ARMV6_PERFCTR_DCACHE_HIT            = 0x9,
  44         ARMV6_PERFCTR_DCACHE_ACCESS         = 0xA,
  45         ARMV6_PERFCTR_DCACHE_MISS           = 0xB,
  46         ARMV6_PERFCTR_DCACHE_WBACK          = 0xC,
  47         ARMV6_PERFCTR_SW_PC_CHANGE          = 0xD,
  48         ARMV6_PERFCTR_MAIN_TLB_MISS         = 0xF,
  49         ARMV6_PERFCTR_EXPL_D_ACCESS         = 0x10,
  50         ARMV6_PERFCTR_LSU_FULL_STALL        = 0x11,
  51         ARMV6_PERFCTR_WBUF_DRAINED          = 0x12,
  52         ARMV6_PERFCTR_CPU_CYCLES            = 0xFF,
  53         ARMV6_PERFCTR_NOP                   = 0x20,
  54 };
  55
  56 enum armv6_counters {
  57         ARMV6_CYCLE_COUNTER = 1,
  58         ARMV6_COUNTER0,
  59         ARMV6_COUNTER1,
  60 };
  61
  62 /*
  63  * The hardware events that we support. We do support cache operations but
  64  * we have harvard caches and no way to combine instruction and data
  65  * accesses/misses in hardware.
  66  */
  67 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
  68         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6_PERFCTR_CPU_CYCLES,
  69         [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6_PERFCTR_INSTR_EXEC,
  70         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
  71         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
  72         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
  73         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6_PERFCTR_BR_MISPREDICT,
  74         [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
  75 };
  76
  77 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  78                                           [PERF_COUNT_HW_CACHE_OP_MAX]
  79                                           [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
  80         [C(L1D)] = {
  81                 /*
  82                  * The performance counters don't differentiate between read
  83                  * and write accesses/misses so this isn't strictly correct,
  84                  * but it's the best we can do. Writes and reads get
  85                  * combined.
  86                  */
  87                 [C(OP_READ)] = {
  88                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
  89                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
  90                 },
  91                 [C(OP_WRITE)] = {
  92                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
  93                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
  94                 },
  95                 [C(OP_PREFETCH)] = {
  96                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
  97                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
  98                 },
  99         },
 100         [C(L1I)] = {
 101                 [C(OP_READ)] = {
 102                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 103                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
 104                 },
 105                 [C(OP_WRITE)] = {
 106                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 107                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
 108                 },
 109                 [C(OP_PREFETCH)] = {
 110                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 111                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 112                 },
 113         },
 114         [C(LL)] = {
 115                 [C(OP_READ)] = {
 116                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 117                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 118                 },
 119                 [C(OP_WRITE)] = {
 120                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 121                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 122                 },
 123                 [C(OP_PREFETCH)] = {
 124                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 125                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 126                 },
 127         },
 128         [C(DTLB)] = {
 129                 /*
 130                  * The ARM performance counters can count micro DTLB misses,
 131                  * micro ITLB misses and main TLB misses. There isn't an event
 132                  * for TLB misses, so use the micro misses here and if users
 133                  * want the main TLB misses they can use a raw counter.
 134                  */
 135                 [C(OP_READ)] = {
 136                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 137                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
 138                 },
 139                 [C(OP_WRITE)] = {
 140                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 141                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
 142                 },
 143                 [C(OP_PREFETCH)] = {
 144                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 145                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 146                 },
 147         },
 148         [C(ITLB)] = {
 149                 [C(OP_READ)] = {
 150                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 151                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
 152                 },
 153                 [C(OP_WRITE)] = {
 154                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 155                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
 156                 },
 157                 [C(OP_PREFETCH)] = {
 158                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 159                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 160                 },
 161         },
 162         [C(BPU)] = {
 163                 [C(OP_READ)] = {
 164                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 165                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 166                 },
 167                 [C(OP_WRITE)] = {
 168                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 169                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 170                 },
 171                 [C(OP_PREFETCH)] = {
 172                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 173                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 174                 },
 175         },
 176 };
 177
 178 enum armv6mpcore_perf_types {
 179         ARMV6MPCORE_PERFCTR_ICACHE_MISS     = 0x0,
 180         ARMV6MPCORE_PERFCTR_IBUF_STALL      = 0x1,
 181         ARMV6MPCORE_PERFCTR_DDEP_STALL      = 0x2,
 182         ARMV6MPCORE_PERFCTR_ITLB_MISS       = 0x3,
 183         ARMV6MPCORE_PERFCTR_DTLB_MISS       = 0x4,
 184         ARMV6MPCORE_PERFCTR_BR_EXEC         = 0x5,
 185         ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
 186         ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
 187         ARMV6MPCORE_PERFCTR_INSTR_EXEC      = 0x8,
 188         ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
 189         ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
 190         ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
 191         ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
 192         ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
 193         ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
 194         ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
 195         ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
 196         ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
 197         ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
 198         ARMV6MPCORE_PERFCTR_CPU_CYCLES      = 0xFF,
 199 };
 200
 201 /*
 202  * The hardware events that we support. We do support cache operations but
 203  * we have harvard caches and no way to combine instruction and data
 204  * accesses/misses in hardware.
 205  */
 206 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
 207         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
 208         [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
 209         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
 210         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
 211         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
 212         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
 213         [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
 214 };
 215
 216 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 217                                         [PERF_COUNT_HW_CACHE_OP_MAX]
 218                                         [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
 219         [C(L1D)] = {
 220                 [C(OP_READ)] = {
 221                         [C(RESULT_ACCESS)]  =
 222                                 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
 223                         [C(RESULT_MISS)]    =
 224                                 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
 225                 },
 226                 [C(OP_WRITE)] = {
 227                         [C(RESULT_ACCESS)]  =
 228                                 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
 229                         [C(RESULT_MISS)]    =
 230                                 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
 231                 },
 232                 [C(OP_PREFETCH)] = {
 233                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 234                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 235                 },
 236         },
 237         [C(L1I)] = {
 238                 [C(OP_READ)] = {
 239                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 240                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
 241                 },
 242                 [C(OP_WRITE)] = {
 243                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 244                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
 245                 },
 246                 [C(OP_PREFETCH)] = {
 247                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 248                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 249                 },
 250         },
 251         [C(LL)] = {
 252                 [C(OP_READ)] = {
 253                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 254                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 255                 },
 256                 [C(OP_WRITE)] = {
 257                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 258                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 259                 },
 260                 [C(OP_PREFETCH)] = {
 261                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 262                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 263                 },
 264         },
 265         [C(DTLB)] = {
 266                 /*
 267                  * The ARM performance counters can count micro DTLB misses,
 268                  * micro ITLB misses and main TLB misses. There isn't an event
 269                  * for TLB misses, so use the micro misses here and if users
 270                  * want the main TLB misses they can use a raw counter.
 271                  */
 272                 [C(OP_READ)] = {
 273                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 274                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
 275                 },
 276                 [C(OP_WRITE)] = {
 277                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 278                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
 279                 },
 280                 [C(OP_PREFETCH)] = {
 281                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 282                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 283                 },
 284         },
 285         [C(ITLB)] = {
 286                 [C(OP_READ)] = {
 287                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 288                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
 289                 },
 290                 [C(OP_WRITE)] = {
 291                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 292                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
 293                 },
 294                 [C(OP_PREFETCH)] = {
 295                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 296                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 297                 },
 298         },
 299         [C(BPU)] = {
 300                 [C(OP_READ)] = {
 301                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 302                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 303                 },
 304                 [C(OP_WRITE)] = {
 305                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 306                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 307                 },
 308                 [C(OP_PREFETCH)] = {
 309                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 310                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 311                 },
 312         },
 313 };
 314
 315 static inline unsigned long
 316 armv6_pmcr_read(void)
 317 {
 318         u32 val;
 319         asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
 320         return val;
 321 }
 322
 323 static inline void
 324 armv6_pmcr_write(unsigned long val)
 325 {
 326         asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
 327 }
 328
 329 #define ARMV6_PMCR_ENABLE               (1 << 0)
 330 #define ARMV6_PMCR_CTR01_RESET          (1 << 1)
 331 #define ARMV6_PMCR_CCOUNT_RESET         (1 << 2)
 332 #define ARMV6_PMCR_CCOUNT_DIV           (1 << 3)
 333 #define ARMV6_PMCR_COUNT0_IEN           (1 << 4)
 334 #define ARMV6_PMCR_COUNT1_IEN           (1 << 5)
 335 #define ARMV6_PMCR_CCOUNT_IEN           (1 << 6)
 336 #define ARMV6_PMCR_COUNT0_OVERFLOW      (1 << 8)
 337 #define ARMV6_PMCR_COUNT1_OVERFLOW      (1 << 9)
 338 #define ARMV6_PMCR_CCOUNT_OVERFLOW      (1 << 10)
 339 #define ARMV6_PMCR_EVT_COUNT0_SHIFT     20
 340 #define ARMV6_PMCR_EVT_COUNT0_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
 341 #define ARMV6_PMCR_EVT_COUNT1_SHIFT     12
 342 #define ARMV6_PMCR_EVT_COUNT1_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
 343
 344 #define ARMV6_PMCR_OVERFLOWED_MASK \
 345         (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
 346          ARMV6_PMCR_CCOUNT_OVERFLOW)
 347
 348 static inline int
 349 armv6_pmcr_has_overflowed(unsigned long pmcr)
 350 {
 351         return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
 352 }
 353
 354 static inline int
 355 armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
 356                                   enum armv6_counters counter)
 357 {
 358         int ret = 0;
 359
 360         if (ARMV6_CYCLE_COUNTER == counter)
 361                 ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
 362         else if (ARMV6_COUNTER0 == counter)
 363                 ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
 364         else if (ARMV6_COUNTER1 == counter)
 365                 ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
 366         else
 367                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 368
 369         return ret;
 370 }
 371
 372 static inline u32
 373 armv6pmu_read_counter(int counter)
 374 {
 375         unsigned long value = 0;
 376
 377         if (ARMV6_CYCLE_COUNTER == counter)
 378                 asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
 379         else if (ARMV6_COUNTER0 == counter)
 380                 asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
 381         else if (ARMV6_COUNTER1 == counter)
 382                 asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
 383         else
 384                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 385
 386         return value;
 387 }
 388
 389 static inline void
 390 armv6pmu_write_counter(int counter,
 391                        u32 value)
 392 {
 393         if (ARMV6_CYCLE_COUNTER == counter)
 394                 asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
 395         else if (ARMV6_COUNTER0 == counter)
 396                 asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
 397         else if (ARMV6_COUNTER1 == counter)
 398                 asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
 399         else
 400                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 401 }
 402
 403 static void
 404 armv6pmu_enable_event(struct hw_perf_event *hwc,
 405                       int idx)
 406 {
 407         unsigned long val, mask, evt, flags;
 408
 409         if (ARMV6_CYCLE_COUNTER == idx) {
 410                 mask    = 0;
 411                 evt     = ARMV6_PMCR_CCOUNT_IEN;
 412         } else if (ARMV6_COUNTER0 == idx) {
 413                 mask    = ARMV6_PMCR_EVT_COUNT0_MASK;
 414                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
 415                           ARMV6_PMCR_COUNT0_IEN;
 416         } else if (ARMV6_COUNTER1 == idx) {
 417                 mask    = ARMV6_PMCR_EVT_COUNT1_MASK;
 418                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
 419                           ARMV6_PMCR_COUNT1_IEN;
 420         } else {
 421                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 422                 return;
 423         }
 424
 425         /*
 426          * Mask out the current event and set the counter to count the event
 427          * that we're interested in.
 428          */
 429         raw_spin_lock_irqsave(&pmu_lock, flags);
 430         val = armv6_pmcr_read();
 431         val &= ~mask;
 432         val |= evt;
 433         armv6_pmcr_write(val);
 434         raw_spin_unlock_irqrestore(&pmu_lock, flags);
 435 }
 436
 437 static irqreturn_t
 438 armv6pmu_handle_irq(int irq_num,
 439                     void *dev)
 440 {
 441         unsigned long pmcr = armv6_pmcr_read();
 442         struct perf_sample_data data;
 443         struct cpu_hw_events *cpuc;
 444         struct pt_regs *regs;
 445         int idx;
 446
 447         if (!armv6_pmcr_has_overflowed(pmcr))
 448                 return IRQ_NONE;
 449
 450         regs = get_irq_regs();
 451
 452         /*
 453          * The interrupts are cleared by writing the overflow flags back to
 454          * the control register. All of the other bits don't have any effect
 455          * if they are rewritten, so write the whole value back.
 456          */
 457         armv6_pmcr_write(pmcr);
 458
 459         perf_sample_data_init(&data, 0);
 460
 461         cpuc = &__get_cpu_var(cpu_hw_events);
 462         for (idx = 0; idx <= armpmu->num_events; ++idx) {
 463                 struct perf_event *event = cpuc->events[idx];
 464                 struct hw_perf_event *hwc;
 465
 466                 if (!test_bit(idx, cpuc->active_mask))
 467                         continue;
 468
 469                 /*
 470                  * We have a single interrupt for all counters. Check that
 471                  * each counter has overflowed before we process it.
 472                  */
 473                 if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
 474                         continue;
 475
 476                 hwc = &event->hw;
 477                 armpmu_event_update(event, hwc, idx, 1);
 478                 data.period = event->hw.last_period;
 479                 if (!armpmu_event_set_period(event, hwc, idx))
 480                         continue;
 481
 482                 if (perf_event_overflow(event, &data, regs))
 483                         armpmu->disable(hwc, idx);
 484         }
 485
 486         /*
 487          * Handle the pending perf events.
 488          *
 489          * Note: this call *must* be run with interrupts disabled. For
 490          * platforms that can have the PMU interrupts raised as an NMI, this
 491          * will not work.
 492          */
 493         irq_work_run();
 494
 495         return IRQ_HANDLED;
 496 }
 497
 498 static void
 499 armv6pmu_start(void)
 500 {
 501         unsigned long flags, val;
 502
 503         raw_spin_lock_irqsave(&pmu_lock, flags);
 504         val = armv6_pmcr_read();
 505         val |= ARMV6_PMCR_ENABLE;
 506         armv6_pmcr_write(val);
 507         raw_spin_unlock_irqrestore(&pmu_lock, flags);
 508 }
 509
 510 static void
 511 armv6pmu_stop(void)
 512 {
 513         unsigned long flags, val;
 514
 515         raw_spin_lock_irqsave(&pmu_lock, flags);
 516         val = armv6_pmcr_read();
 517         val &= ~ARMV6_PMCR_ENABLE;
 518         armv6_pmcr_write(val);
 519         raw_spin_unlock_irqrestore(&pmu_lock, flags);
 520 }
 521
 522 static int
 523 armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
 524                        struct hw_perf_event *event)
 525 {
 526         /* Always place a cycle counter into the cycle counter. */
 527         if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
 528                 if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
 529                         return -EAGAIN;
 530
 531                 return ARMV6_CYCLE_COUNTER;
 532         } else {
 533                 /*
 534                  * For anything other than a cycle counter, try and use
 535                  * counter0 and counter1.
 536                  */
 537                 if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
 538                         return ARMV6_COUNTER1;
 539
 540                 if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
 541                         return ARMV6_COUNTER0;
 542
 543                 /* The counters are all in use. */
 544                 return -EAGAIN;
 545         }
 546 }
 547
 548 static void
 549 armv6pmu_disable_event(struct hw_perf_event *hwc,
 550                        int idx)
 551 {
 552         unsigned long val, mask, evt, flags;
 553
 554         if (ARMV6_CYCLE_COUNTER == idx) {
 555                 mask    = ARMV6_PMCR_CCOUNT_IEN;
 556                 evt     = 0;
 557         } else if (ARMV6_COUNTER0 == idx) {
 558                 mask    = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
 559                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
 560         } else if (ARMV6_COUNTER1 == idx) {
 561                 mask    = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
 562                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
 563         } else {
 564                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 565                 return;
 566         }
 567
 568         /*
 569          * Mask out the current event and set the counter to count the number
 570          * of ETM bus signal assertion cycles. The external reporting should
 571          * be disabled and so this should never increment.
 572          */
 573         raw_spin_lock_irqsave(&pmu_lock, flags);
 574         val = armv6_pmcr_read();
 575         val &= ~mask;
 576         val |= evt;
 577         armv6_pmcr_write(val);
 578         raw_spin_unlock_irqrestore(&pmu_lock, flags);
 579 }
 580
 581 static void
 582 armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
 583                               int idx)
 584 {
 585         unsigned long val, mask, flags, evt = 0;
 586
 587         if (ARMV6_CYCLE_COUNTER == idx) {
 588                 mask    = ARMV6_PMCR_CCOUNT_IEN;
 589         } else if (ARMV6_COUNTER0 == idx) {
 590                 mask    = ARMV6_PMCR_COUNT0_IEN;
 591         } else if (ARMV6_COUNTER1 == idx) {
 592                 mask    = ARMV6_PMCR_COUNT1_IEN;
 593         } else {
 594                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 595                 return;
 596         }
 597
 598         /*
 599          * Unlike UP ARMv6, we don't have a way of stopping the counters. We
 600          * simply disable the interrupt reporting.
 601          */
 602         raw_spin_lock_irqsave(&pmu_lock, flags);
 603         val = armv6_pmcr_read();
 604         val &= ~mask;
 605         val |= evt;
 606         armv6_pmcr_write(val);
 607         raw_spin_unlock_irqrestore(&pmu_lock, flags);
 608 }
 609
 610 static const struct arm_pmu armv6pmu = {
 611         .id                     = ARM_PERF_PMU_ID_V6,
 612         .name                   = "v6",
 613         .handle_irq             = armv6pmu_handle_irq,
 614         .enable                 = armv6pmu_enable_event,
 615         .disable                = armv6pmu_disable_event,
 616         .read_counter           = armv6pmu_read_counter,
 617         .write_counter          = armv6pmu_write_counter,
 618         .get_event_idx          = armv6pmu_get_event_idx,
 619         .start                  = armv6pmu_start,
 620         .stop                   = armv6pmu_stop,
 621         .cache_map              = &armv6_perf_cache_map,
 622         .event_map              = &armv6_perf_map,
 623         .raw_event_mask         = 0xFF,
 624         .num_events             = 3,
 625         .max_period             = (1LLU << 32) - 1,
 626 };
 627
 628 static const struct arm_pmu *__init armv6pmu_init(void)
 629 {
 630         return &armv6pmu;
 631 }
 632
 633 /*
 634  * ARMv6mpcore is almost identical to single core ARMv6 with the exception
 635  * that some of the events have different enumerations and that there is no
 636  * *hack* to stop the programmable counters. To stop the counters we simply
 637  * disable the interrupt reporting and update the event. When unthrottling we
 638  * reset the period and enable the interrupt reporting.
 639  */
 640 static const struct arm_pmu armv6mpcore_pmu = {
 641         .id                     = ARM_PERF_PMU_ID_V6MP,
 642         .name                   = "v6mpcore",
 643         .handle_irq             = armv6pmu_handle_irq,
 644         .enable                 = armv6pmu_enable_event,
 645         .disable                = armv6mpcore_pmu_disable_event,
 646         .read_counter           = armv6pmu_read_counter,
 647         .write_counter          = armv6pmu_write_counter,
 648         .get_event_idx          = armv6pmu_get_event_idx,
 649         .start                  = armv6pmu_start,
 650         .stop                   = armv6pmu_stop,
 651         .cache_map              = &armv6mpcore_perf_cache_map,
 652         .event_map              = &armv6mpcore_perf_map,
 653         .raw_event_mask         = 0xFF,
 654         .num_events             = 3,
 655         .max_period             = (1LLU << 32) - 1,
 656 };
 657
 658 static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
 659 {
 660         return &armv6mpcore_pmu;
 661 }
 662 #else
 663 static const struct arm_pmu *__init armv6pmu_init(void)
 664 {
 665         return NULL;
 666 }
 667
 668 static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
 669 {
 670         return NULL;
 671 }
 672 #endif  /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */