arch/arm/boot/dts/imx6qdl.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /include/ "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 serial0 = &uart1;
  18                 serial1 = &uart2;
  19                 serial2 = &uart3;
  20                 serial3 = &uart4;
  21                 serial4 = &uart5;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29         };
  30
  31         intc: interrupt-controller@00a01000 {
  32                 compatible = "arm,cortex-a9-gic";
  33                 #interrupt-cells = <3>;
  34                 #address-cells = <1>;
  35                 #size-cells = <1>;
  36                 interrupt-controller;
  37                 reg = <0x00a01000 0x1000>,
  38                       <0x00a00100 0x100>;
  39         };
  40
  41         clocks {
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44
  45                 ckil {
  46                         compatible = "fsl,imx-ckil", "fixed-clock";
  47                         clock-frequency = <32768>;
  48                 };
  49
  50                 ckih1 {
  51                         compatible = "fsl,imx-ckih1", "fixed-clock";
  52                         clock-frequency = <0>;
  53                 };
  54
  55                 osc {
  56                         compatible = "fsl,imx-osc", "fixed-clock";
  57                         clock-frequency = <24000000>;
  58                 };
  59         };
  60
  61         soc {
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 compatible = "simple-bus";
  65                 interrupt-parent = <&intc>;
  66                 ranges;
  67
  68                 dma-apbh@00110000 {
  69                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
  70                         reg = <0x00110000 0x2000>;
  71                         clocks = <&clks 106>;
  72                 };
  73
  74                 gpmi: gpmi-nand@00112000 {
  75                         compatible = "fsl,imx6q-gpmi-nand";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
  79                         reg-names = "gpmi-nand", "bch";
  80                         interrupts = <0 13 0x04>, <0 15 0x04>;
  81                         interrupt-names = "gpmi-dma", "bch";
  82                         clocks = <&clks 152>, <&clks 153>, <&clks 151>,
  83                                  <&clks 150>, <&clks 149>;
  84                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
  85                                       "gpmi_bch_apb", "per1_bch";
  86                         fsl,gpmi-dma-channel = <0>;
  87                         status = "disabled";
  88                 };
  89
  90                 timer@00a00600 {
  91                         compatible = "arm,cortex-a9-twd-timer";
  92                         reg = <0x00a00600 0x20>;
  93                         interrupts = <1 13 0xf01>;
  94                 };
  95
  96                 L2: l2-cache@00a02000 {
  97                         compatible = "arm,pl310-cache";
  98                         reg = <0x00a02000 0x1000>;
  99                         interrupts = <0 92 0x04>;
 100                         cache-unified;
 101                         cache-level = <2>;
 102                 };
 103
 104                 aips-bus@02000000 { /* AIPS1 */
 105                         compatible = "fsl,aips-bus", "simple-bus";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108                         reg = <0x02000000 0x100000>;
 109                         ranges;
 110
 111                         spba-bus@02000000 {
 112                                 compatible = "fsl,spba-bus", "simple-bus";
 113                                 #address-cells = <1>;
 114                                 #size-cells = <1>;
 115                                 reg = <0x02000000 0x40000>;
 116                                 ranges;
 117
 118                                 spdif: spdif@02004000 {
 119                                         reg = <0x02004000 0x4000>;
 120                                         interrupts = <0 52 0x04>;
 121                                 };
 122
 123                                 ecspi1: ecspi@02008000 {
 124                                         #address-cells = <1>;
 125                                         #size-cells = <0>;
 126                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 127                                         reg = <0x02008000 0x4000>;
 128                                         interrupts = <0 31 0x04>;
 129                                         clocks = <&clks 112>, <&clks 112>;
 130                                         clock-names = "ipg", "per";
 131                                         status = "disabled";
 132                                 };
 133
 134                                 ecspi2: ecspi@0200c000 {
 135                                         #address-cells = <1>;
 136                                         #size-cells = <0>;
 137                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 138                                         reg = <0x0200c000 0x4000>;
 139                                         interrupts = <0 32 0x04>;
 140                                         clocks = <&clks 113>, <&clks 113>;
 141                                         clock-names = "ipg", "per";
 142                                         status = "disabled";
 143                                 };
 144
 145                                 ecspi3: ecspi@02010000 {
 146                                         #address-cells = <1>;
 147                                         #size-cells = <0>;
 148                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 149                                         reg = <0x02010000 0x4000>;
 150                                         interrupts = <0 33 0x04>;
 151                                         clocks = <&clks 114>, <&clks 114>;
 152                                         clock-names = "ipg", "per";
 153                                         status = "disabled";
 154                                 };
 155
 156                                 ecspi4: ecspi@02014000 {
 157                                         #address-cells = <1>;
 158                                         #size-cells = <0>;
 159                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 160                                         reg = <0x02014000 0x4000>;
 161                                         interrupts = <0 34 0x04>;
 162                                         clocks = <&clks 115>, <&clks 115>;
 163                                         clock-names = "ipg", "per";
 164                                         status = "disabled";
 165                                 };
 166
 167                                 uart1: serial@02020000 {
 168                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 169                                         reg = <0x02020000 0x4000>;
 170                                         interrupts = <0 26 0x04>;
 171                                         clocks = <&clks 160>, <&clks 161>;
 172                                         clock-names = "ipg", "per";
 173                                         status = "disabled";
 174                                 };
 175
 176                                 esai: esai@02024000 {
 177                                         reg = <0x02024000 0x4000>;
 178                                         interrupts = <0 51 0x04>;
 179                                 };
 180
 181                                 ssi1: ssi@02028000 {
 182                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 183                                         reg = <0x02028000 0x4000>;
 184                                         interrupts = <0 46 0x04>;
 185                                         clocks = <&clks 178>;
 186                                         fsl,fifo-depth = <15>;
 187                                         fsl,ssi-dma-events = <38 37>;
 188                                         status = "disabled";
 189                                 };
 190
 191                                 ssi2: ssi@0202c000 {
 192                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 193                                         reg = <0x0202c000 0x4000>;
 194                                         interrupts = <0 47 0x04>;
 195                                         clocks = <&clks 179>;
 196                                         fsl,fifo-depth = <15>;
 197                                         fsl,ssi-dma-events = <42 41>;
 198                                         status = "disabled";
 199                                 };
 200
 201                                 ssi3: ssi@02030000 {
 202                                         compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 203                                         reg = <0x02030000 0x4000>;
 204                                         interrupts = <0 48 0x04>;
 205                                         clocks = <&clks 180>;
 206                                         fsl,fifo-depth = <15>;
 207                                         fsl,ssi-dma-events = <46 45>;
 208                                         status = "disabled";
 209                                 };
 210
 211                                 asrc: asrc@02034000 {
 212                                         reg = <0x02034000 0x4000>;
 213                                         interrupts = <0 50 0x04>;
 214                                 };
 215
 216                                 spba@0203c000 {
 217                                         reg = <0x0203c000 0x4000>;
 218                                 };
 219                         };
 220
 221                         vpu: vpu@02040000 {
 222                                 reg = <0x02040000 0x3c000>;
 223                                 interrupts = <0 3 0x04 0 12 0x04>;
 224                         };
 225
 226                         aipstz@0207c000 { /* AIPSTZ1 */
 227                                 reg = <0x0207c000 0x4000>;
 228                         };
 229
 230                         pwm1: pwm@02080000 {
 231                                 #pwm-cells = <2>;
 232                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 233                                 reg = <0x02080000 0x4000>;
 234                                 interrupts = <0 83 0x04>;
 235                                 clocks = <&clks 62>, <&clks 145>;
 236                                 clock-names = "ipg", "per";
 237                         };
 238
 239                         pwm2: pwm@02084000 {
 240                                 #pwm-cells = <2>;
 241                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 242                                 reg = <0x02084000 0x4000>;
 243                                 interrupts = <0 84 0x04>;
 244                                 clocks = <&clks 62>, <&clks 146>;
 245                                 clock-names = "ipg", "per";
 246                         };
 247
 248                         pwm3: pwm@02088000 {
 249                                 #pwm-cells = <2>;
 250                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 251                                 reg = <0x02088000 0x4000>;
 252                                 interrupts = <0 85 0x04>;
 253                                 clocks = <&clks 62>, <&clks 147>;
 254                                 clock-names = "ipg", "per";
 255                         };
 256
 257                         pwm4: pwm@0208c000 {
 258                                 #pwm-cells = <2>;
 259                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 260                                 reg = <0x0208c000 0x4000>;
 261                                 interrupts = <0 86 0x04>;
 262                                 clocks = <&clks 62>, <&clks 148>;
 263                                 clock-names = "ipg", "per";
 264                         };
 265
 266                         can1: flexcan@02090000 {
 267                                 reg = <0x02090000 0x4000>;
 268                                 interrupts = <0 110 0x04>;
 269                         };
 270
 271                         can2: flexcan@02094000 {
 272                                 reg = <0x02094000 0x4000>;
 273                                 interrupts = <0 111 0x04>;
 274                         };
 275
 276                         gpt: gpt@02098000 {
 277                                 compatible = "fsl,imx6q-gpt";
 278                                 reg = <0x02098000 0x4000>;
 279                                 interrupts = <0 55 0x04>;
 280                         };
 281
 282                         gpio1: gpio@0209c000 {
 283                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 284                                 reg = <0x0209c000 0x4000>;
 285                                 interrupts = <0 66 0x04 0 67 0x04>;
 286                                 gpio-controller;
 287                                 #gpio-cells = <2>;
 288                                 interrupt-controller;
 289                                 #interrupt-cells = <2>;
 290                         };
 291
 292                         gpio2: gpio@020a0000 {
 293                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 294                                 reg = <0x020a0000 0x4000>;
 295                                 interrupts = <0 68 0x04 0 69 0x04>;
 296                                 gpio-controller;
 297                                 #gpio-cells = <2>;
 298                                 interrupt-controller;
 299                                 #interrupt-cells = <2>;
 300                         };
 301
 302                         gpio3: gpio@020a4000 {
 303                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 304                                 reg = <0x020a4000 0x4000>;
 305                                 interrupts = <0 70 0x04 0 71 0x04>;
 306                                 gpio-controller;
 307                                 #gpio-cells = <2>;
 308                                 interrupt-controller;
 309                                 #interrupt-cells = <2>;
 310                         };
 311
 312                         gpio4: gpio@020a8000 {
 313                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 314                                 reg = <0x020a8000 0x4000>;
 315                                 interrupts = <0 72 0x04 0 73 0x04>;
 316                                 gpio-controller;
 317                                 #gpio-cells = <2>;
 318                                 interrupt-controller;
 319                                 #interrupt-cells = <2>;
 320                         };
 321
 322                         gpio5: gpio@020ac000 {
 323                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 324                                 reg = <0x020ac000 0x4000>;
 325                                 interrupts = <0 74 0x04 0 75 0x04>;
 326                                 gpio-controller;
 327                                 #gpio-cells = <2>;
 328                                 interrupt-controller;
 329                                 #interrupt-cells = <2>;
 330                         };
 331
 332                         gpio6: gpio@020b0000 {
 333                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 334                                 reg = <0x020b0000 0x4000>;
 335                                 interrupts = <0 76 0x04 0 77 0x04>;
 336                                 gpio-controller;
 337                                 #gpio-cells = <2>;
 338                                 interrupt-controller;
 339                                 #interrupt-cells = <2>;
 340                         };
 341
 342                         gpio7: gpio@020b4000 {
 343                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 344                                 reg = <0x020b4000 0x4000>;
 345                                 interrupts = <0 78 0x04 0 79 0x04>;
 346                                 gpio-controller;
 347                                 #gpio-cells = <2>;
 348                                 interrupt-controller;
 349                                 #interrupt-cells = <2>;
 350                         };
 351
 352                         kpp: kpp@020b8000 {
 353                                 reg = <0x020b8000 0x4000>;
 354                                 interrupts = <0 82 0x04>;
 355                         };
 356
 357                         wdog1: wdog@020bc000 {
 358                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 359                                 reg = <0x020bc000 0x4000>;
 360                                 interrupts = <0 80 0x04>;
 361                                 clocks = <&clks 0>;
 362                         };
 363
 364                         wdog2: wdog@020c0000 {
 365                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 366                                 reg = <0x020c0000 0x4000>;
 367                                 interrupts = <0 81 0x04>;
 368                                 clocks = <&clks 0>;
 369                                 status = "disabled";
 370                         };
 371
 372                         clks: ccm@020c4000 {
 373                                 compatible = "fsl,imx6q-ccm";
 374                                 reg = <0x020c4000 0x4000>;
 375                                 interrupts = <0 87 0x04 0 88 0x04>;
 376                                 #clock-cells = <1>;
 377                         };
 378
 379                         anatop: anatop@020c8000 {
 380                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 381                                 reg = <0x020c8000 0x1000>;
 382                                 interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 383
 384                                 regulator-1p1@110 {
 385                                         compatible = "fsl,anatop-regulator";
 386                                         regulator-name = "vdd1p1";
 387                                         regulator-min-microvolt = <800000>;
 388                                         regulator-max-microvolt = <1375000>;
 389                                         regulator-always-on;
 390                                         anatop-reg-offset = <0x110>;
 391                                         anatop-vol-bit-shift = <8>;
 392                                         anatop-vol-bit-width = <5>;
 393                                         anatop-min-bit-val = <4>;
 394                                         anatop-min-voltage = <800000>;
 395                                         anatop-max-voltage = <1375000>;
 396                                 };
 397
 398                                 regulator-3p0@120 {
 399                                         compatible = "fsl,anatop-regulator";
 400                                         regulator-name = "vdd3p0";
 401                                         regulator-min-microvolt = <2800000>;
 402                                         regulator-max-microvolt = <3150000>;
 403                                         regulator-always-on;
 404                                         anatop-reg-offset = <0x120>;
 405                                         anatop-vol-bit-shift = <8>;
 406                                         anatop-vol-bit-width = <5>;
 407                                         anatop-min-bit-val = <0>;
 408                                         anatop-min-voltage = <2625000>;
 409                                         anatop-max-voltage = <3400000>;
 410                                 };
 411
 412                                 regulator-2p5@130 {
 413                                         compatible = "fsl,anatop-regulator";
 414                                         regulator-name = "vdd2p5";
 415                                         regulator-min-microvolt = <2000000>;
 416                                         regulator-max-microvolt = <2750000>;
 417                                         regulator-always-on;
 418                                         anatop-reg-offset = <0x130>;
 419                                         anatop-vol-bit-shift = <8>;
 420                                         anatop-vol-bit-width = <5>;
 421                                         anatop-min-bit-val = <0>;
 422                                         anatop-min-voltage = <2000000>;
 423                                         anatop-max-voltage = <2750000>;
 424                                 };
 425
 426                                 reg_arm: regulator-vddcore@140 {
 427                                         compatible = "fsl,anatop-regulator";
 428                                         regulator-name = "cpu";
 429                                         regulator-min-microvolt = <725000>;
 430                                         regulator-max-microvolt = <1450000>;
 431                                         regulator-always-on;
 432                                         anatop-reg-offset = <0x140>;
 433                                         anatop-vol-bit-shift = <0>;
 434                                         anatop-vol-bit-width = <5>;
 435                                         anatop-delay-reg-offset = <0x170>;
 436                                         anatop-delay-bit-shift = <24>;
 437                                         anatop-delay-bit-width = <2>;
 438                                         anatop-min-bit-val = <1>;
 439                                         anatop-min-voltage = <725000>;
 440                                         anatop-max-voltage = <1450000>;
 441                                 };
 442
 443                                 reg_pu: regulator-vddpu@140 {
 444                                         compatible = "fsl,anatop-regulator";
 445                                         regulator-name = "vddpu";
 446                                         regulator-min-microvolt = <725000>;
 447                                         regulator-max-microvolt = <1450000>;
 448                                         regulator-always-on;
 449                                         anatop-reg-offset = <0x140>;
 450                                         anatop-vol-bit-shift = <9>;
 451                                         anatop-vol-bit-width = <5>;
 452                                         anatop-delay-reg-offset = <0x170>;
 453                                         anatop-delay-bit-shift = <26>;
 454                                         anatop-delay-bit-width = <2>;
 455                                         anatop-min-bit-val = <1>;
 456                                         anatop-min-voltage = <725000>;
 457                                         anatop-max-voltage = <1450000>;
 458                                 };
 459
 460                                 reg_soc: regulator-vddsoc@140 {
 461                                         compatible = "fsl,anatop-regulator";
 462                                         regulator-name = "vddsoc";
 463                                         regulator-min-microvolt = <725000>;
 464                                         regulator-max-microvolt = <1450000>;
 465                                         regulator-always-on;
 466                                         anatop-reg-offset = <0x140>;
 467                                         anatop-vol-bit-shift = <18>;
 468                                         anatop-vol-bit-width = <5>;
 469                                         anatop-delay-reg-offset = <0x170>;
 470                                         anatop-delay-bit-shift = <28>;
 471                                         anatop-delay-bit-width = <2>;
 472                                         anatop-min-bit-val = <1>;
 473                                         anatop-min-voltage = <725000>;
 474                                         anatop-max-voltage = <1450000>;
 475                                 };
 476                         };
 477
 478                         usbphy1: usbphy@020c9000 {
 479                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 480                                 reg = <0x020c9000 0x1000>;
 481                                 interrupts = <0 44 0x04>;
 482                                 clocks = <&clks 182>;
 483                         };
 484
 485                         usbphy2: usbphy@020ca000 {
 486                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 487                                 reg = <0x020ca000 0x1000>;
 488                                 interrupts = <0 45 0x04>;
 489                                 clocks = <&clks 183>;
 490                         };
 491
 492                         snvs@020cc000 {
 493                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 494                                 #address-cells = <1>;
 495                                 #size-cells = <1>;
 496                                 ranges = <0 0x020cc000 0x4000>;
 497
 498                                 snvs-rtc-lp@34 {
 499                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 500                                         reg = <0x34 0x58>;
 501                                         interrupts = <0 19 0x04 0 20 0x04>;
 502                                 };
 503                         };
 504
 505                         epit1: epit@020d0000 { /* EPIT1 */
 506                                 reg = <0x020d0000 0x4000>;
 507                                 interrupts = <0 56 0x04>;
 508                         };
 509
 510                         epit2: epit@020d4000 { /* EPIT2 */
 511                                 reg = <0x020d4000 0x4000>;
 512                                 interrupts = <0 57 0x04>;
 513                         };
 514
 515                         src: src@020d8000 {
 516                                 compatible = "fsl,imx6q-src";
 517                                 reg = <0x020d8000 0x4000>;
 518                                 interrupts = <0 91 0x04 0 96 0x04>;
 519                         };
 520
 521                         gpc: gpc@020dc000 {
 522                                 compatible = "fsl,imx6q-gpc";
 523                                 reg = <0x020dc000 0x4000>;
 524                                 interrupts = <0 89 0x04 0 90 0x04>;
 525                         };
 526
 527                         gpr: iomuxc-gpr@020e0000 {
 528                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 529                                 reg = <0x020e0000 0x38>;
 530                         };
 531
 532                         dcic1: dcic@020e4000 {
 533                                 reg = <0x020e4000 0x4000>;
 534                                 interrupts = <0 124 0x04>;
 535                         };
 536
 537                         dcic2: dcic@020e8000 {
 538                                 reg = <0x020e8000 0x4000>;
 539                                 interrupts = <0 125 0x04>;
 540                         };
 541
 542                         sdma: sdma@020ec000 {
 543                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 544                                 reg = <0x020ec000 0x4000>;
 545                                 interrupts = <0 2 0x04>;
 546                                 clocks = <&clks 155>, <&clks 155>;
 547                                 clock-names = "ipg", "ahb";
 548                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 549                         };
 550                 };
 551
 552                 aips-bus@02100000 { /* AIPS2 */
 553                         compatible = "fsl,aips-bus", "simple-bus";
 554                         #address-cells = <1>;
 555                         #size-cells = <1>;
 556                         reg = <0x02100000 0x100000>;
 557                         ranges;
 558
 559                         caam@02100000 {
 560                                 reg = <0x02100000 0x40000>;
 561                                 interrupts = <0 105 0x04 0 106 0x04>;
 562                         };
 563
 564                         aipstz@0217c000 { /* AIPSTZ2 */
 565                                 reg = <0x0217c000 0x4000>;
 566                         };
 567
 568                         usbotg: usb@02184000 {
 569                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 570                                 reg = <0x02184000 0x200>;
 571                                 interrupts = <0 43 0x04>;
 572                                 clocks = <&clks 162>;
 573                                 fsl,usbphy = <&usbphy1>;
 574                                 fsl,usbmisc = <&usbmisc 0>;
 575                                 status = "disabled";
 576                         };
 577
 578                         usbh1: usb@02184200 {
 579                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 580                                 reg = <0x02184200 0x200>;
 581                                 interrupts = <0 40 0x04>;
 582                                 clocks = <&clks 162>;
 583                                 fsl,usbphy = <&usbphy2>;
 584                                 fsl,usbmisc = <&usbmisc 1>;
 585                                 status = "disabled";
 586                         };
 587
 588                         usbh2: usb@02184400 {
 589                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 590                                 reg = <0x02184400 0x200>;
 591                                 interrupts = <0 41 0x04>;
 592                                 clocks = <&clks 162>;
 593                                 fsl,usbmisc = <&usbmisc 2>;
 594                                 status = "disabled";
 595                         };
 596
 597                         usbh3: usb@02184600 {
 598                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 599                                 reg = <0x02184600 0x200>;
 600                                 interrupts = <0 42 0x04>;
 601                                 clocks = <&clks 162>;
 602                                 fsl,usbmisc = <&usbmisc 3>;
 603                                 status = "disabled";
 604                         };
 605
 606                         usbmisc: usbmisc: usbmisc@02184800 {
 607                                 #index-cells = <1>;
 608                                 compatible = "fsl,imx6q-usbmisc";
 609                                 reg = <0x02184800 0x200>;
 610                                 clocks = <&clks 162>;
 611                         };
 612
 613                         fec: ethernet@02188000 {
 614                                 compatible = "fsl,imx6q-fec";
 615                                 reg = <0x02188000 0x4000>;
 616                                 interrupts = <0 118 0x04 0 119 0x04>;
 617                                 clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 618                                 clock-names = "ipg", "ahb", "ptp";
 619                                 status = "disabled";
 620                         };
 621
 622                         mlb@0218c000 {
 623                                 reg = <0x0218c000 0x4000>;
 624                                 interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 625                         };
 626
 627                         usdhc1: usdhc@02190000 {
 628                                 compatible = "fsl,imx6q-usdhc";
 629                                 reg = <0x02190000 0x4000>;
 630                                 interrupts = <0 22 0x04>;
 631                                 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 632                                 clock-names = "ipg", "ahb", "per";
 633                                 bus-width = <4>;
 634                                 status = "disabled";
 635                         };
 636
 637                         usdhc2: usdhc@02194000 {
 638                                 compatible = "fsl,imx6q-usdhc";
 639                                 reg = <0x02194000 0x4000>;
 640                                 interrupts = <0 23 0x04>;
 641                                 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 642                                 clock-names = "ipg", "ahb", "per";
 643                                 bus-width = <4>;
 644                                 status = "disabled";
 645                         };
 646
 647                         usdhc3: usdhc@02198000 {
 648                                 compatible = "fsl,imx6q-usdhc";
 649                                 reg = <0x02198000 0x4000>;
 650                                 interrupts = <0 24 0x04>;
 651                                 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 652                                 clock-names = "ipg", "ahb", "per";
 653                                 bus-width = <4>;
 654                                 status = "disabled";
 655                         };
 656
 657                         usdhc4: usdhc@0219c000 {
 658                                 compatible = "fsl,imx6q-usdhc";
 659                                 reg = <0x0219c000 0x4000>;
 660                                 interrupts = <0 25 0x04>;
 661                                 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 662                                 clock-names = "ipg", "ahb", "per";
 663                                 bus-width = <4>;
 664                                 status = "disabled";
 665                         };
 666
 667                         i2c1: i2c@021a0000 {
 668                                 #address-cells = <1>;
 669                                 #size-cells = <0>;
 670                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 671                                 reg = <0x021a0000 0x4000>;
 672                                 interrupts = <0 36 0x04>;
 673                                 clocks = <&clks 125>;
 674                                 status = "disabled";
 675                         };
 676
 677                         i2c2: i2c@021a4000 {
 678                                 #address-cells = <1>;
 679                                 #size-cells = <0>;
 680                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 681                                 reg = <0x021a4000 0x4000>;
 682                                 interrupts = <0 37 0x04>;
 683                                 clocks = <&clks 126>;
 684                                 status = "disabled";
 685                         };
 686
 687                         i2c3: i2c@021a8000 {
 688                                 #address-cells = <1>;
 689                                 #size-cells = <0>;
 690                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 691                                 reg = <0x021a8000 0x4000>;
 692                                 interrupts = <0 38 0x04>;
 693                                 clocks = <&clks 127>;
 694                                 status = "disabled";
 695                         };
 696
 697                         romcp@021ac000 {
 698                                 reg = <0x021ac000 0x4000>;
 699                         };
 700
 701                         mmdc0: mmdc@021b0000 { /* MMDC0 */
 702                                 compatible = "fsl,imx6q-mmdc";
 703                                 reg = <0x021b0000 0x4000>;
 704                         };
 705
 706                         mmdc1: mmdc@021b4000 { /* MMDC1 */
 707                                 reg = <0x021b4000 0x4000>;
 708                         };
 709
 710                         weim@021b8000 {
 711                                 reg = <0x021b8000 0x4000>;
 712                                 interrupts = <0 14 0x04>;
 713                         };
 714
 715                         ocotp@021bc000 {
 716                                 compatible = "fsl,imx6q-ocotp";
 717                                 reg = <0x021bc000 0x4000>;
 718                         };
 719
 720                         ocotp@021c0000 {
 721                                 reg = <0x021c0000 0x4000>;
 722                                 interrupts = <0 21 0x04>;
 723                         };
 724
 725                         tzasc@021d0000 { /* TZASC1 */
 726                                 reg = <0x021d0000 0x4000>;
 727                                 interrupts = <0 108 0x04>;
 728                         };
 729
 730                         tzasc@021d4000 { /* TZASC2 */
 731                                 reg = <0x021d4000 0x4000>;
 732                                 interrupts = <0 109 0x04>;
 733                         };
 734
 735                         audmux: audmux@021d8000 {
 736                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 737                                 reg = <0x021d8000 0x4000>;
 738                                 status = "disabled";
 739                         };
 740
 741                         mipi@021dc000 { /* MIPI-CSI */
 742                                 reg = <0x021dc000 0x4000>;
 743                         };
 744
 745                         mipi@021e0000 { /* MIPI-DSI */
 746                                 reg = <0x021e0000 0x4000>;
 747                         };
 748
 749                         vdoa@021e4000 {
 750                                 reg = <0x021e4000 0x4000>;
 751                                 interrupts = <0 18 0x04>;
 752                         };
 753
 754                         uart2: serial@021e8000 {
 755                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 756                                 reg = <0x021e8000 0x4000>;
 757                                 interrupts = <0 27 0x04>;
 758                                 clocks = <&clks 160>, <&clks 161>;
 759                                 clock-names = "ipg", "per";
 760                                 status = "disabled";
 761                         };
 762
 763                         uart3: serial@021ec000 {
 764                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 765                                 reg = <0x021ec000 0x4000>;
 766                                 interrupts = <0 28 0x04>;
 767                                 clocks = <&clks 160>, <&clks 161>;
 768                                 clock-names = "ipg", "per";
 769                                 status = "disabled";
 770                         };
 771
 772                         uart4: serial@021f0000 {
 773                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 774                                 reg = <0x021f0000 0x4000>;
 775                                 interrupts = <0 29 0x04>;
 776                                 clocks = <&clks 160>, <&clks 161>;
 777                                 clock-names = "ipg", "per";
 778                                 status = "disabled";
 779                         };
 780
 781                         uart5: serial@021f4000 {
 782                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 783                                 reg = <0x021f4000 0x4000>;
 784                                 interrupts = <0 30 0x04>;
 785                                 clocks = <&clks 160>, <&clks 161>;
 786                                 clock-names = "ipg", "per";
 787                                 status = "disabled";
 788                         };
 789                 };
 790
 791                 ipu1: ipu@02400000 {
 792                         #crtc-cells = <1>;
 793                         compatible = "fsl,imx6q-ipu";
 794                         reg = <0x02400000 0x400000>;
 795                         interrupts = <0 6 0x4 0 5 0x4>;
 796                         clocks = <&clks 130>, <&clks 131>, <&clks 132>;
 797                         clock-names = "bus", "di0", "di1";
 798                 };
 799         };
 800 };