2 * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6 * Licensed under GPLv2 only.
9 /include/ "skeleton.dtsi"
12 model = "Atmel AT91SAM9263 family SoC";
13 compatible = "atmel,at91sam9263";
14 interrupt-parent = <&aic>;
31 compatible = "arm,arm926ejs";
36 reg = <0x20000000 0x08000000>;
40 compatible = "simple-bus";
46 compatible = "simple-bus";
51 aic: interrupt-controller@fffff000 {
52 #interrupt-cells = <3>;
53 compatible = "atmel,at91rm9200-aic";
55 reg = <0xfffff000 0x200>;
56 atmel,external-irqs = <30 31>;
60 compatible = "atmel,at91rm9200-pmc";
61 reg = <0xfffffc00 0x100>;
65 compatible = "atmel,at91sam9260-sdramc";
66 reg = <0xffffe200 0x200
71 compatible = "atmel,at91sam9260-pit";
72 reg = <0xfffffd30 0xf>;
76 tcb0: timer@fff7c000 {
77 compatible = "atmel,at91rm9200-tcb";
78 reg = <0xfff7c000 0x100>;
79 interrupts = <19 4 0>;
83 compatible = "atmel,at91sam9260-rstc";
84 reg = <0xfffffd00 0x10>;
88 compatible = "atmel,at91sam9260-shdwc";
89 reg = <0xfffffd10 0x10>;
95 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
96 ranges = <0xfffff200 0xfffff200 0xa00>;
100 0xfffffffb 0xffffe07f /* pioA */
101 0x0007ffff 0x39072fff /* pioB */
102 0xffffffff 0x3ffffff8 /* pioC */
103 0xfffffbff 0xffffffff /* pioD */
104 0xffe00fff 0xfbfcff00 /* pioE */
107 /* shared pinctrl settings */
109 pinctrl_dbgu: dbgu-0 {
111 <2 30 0x1 0x0 /* PC30 periph A */
112 2 31 0x1 0x1>; /* PC31 periph with pullup */
117 pinctrl_usart0: usart0-0 {
119 <0 26 0x1 0x1 /* PA26 periph A with pullup */
120 0 27 0x1 0x0>; /* PA27 periph A */
123 pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
125 <0 28 0x1 0x0 /* PA28 periph A */
126 0 29 0x1 0x0>; /* PA29 periph A */
131 pinctrl_usart1: usart1-0 {
133 <3 0 0x1 0x1 /* PD0 periph A with pullup */
134 3 1 0x1 0x0>; /* PD1 periph A */
137 pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
139 <3 7 0x2 0x0 /* PD7 periph B */
140 3 8 0x2 0x0>; /* PD8 periph B */
145 pinctrl_usart2: usart2-0 {
147 <3 2 0x1 0x1 /* PD2 periph A with pullup */
148 3 3 0x1 0x0>; /* PD3 periph A */
151 pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
153 <3 5 0x2 0x0 /* PD5 periph B */
154 4 6 0x2 0x0>; /* PD6 periph B */
159 pinctrl_nand: nand-0 {
161 <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/
162 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */
167 pinctrl_macb_rmii: macb_rmii-0 {
169 <2 25 0x2 0x0 /* PC25 periph B */
170 4 21 0x1 0x0 /* PE21 periph A */
171 4 23 0x1 0x0 /* PE23 periph A */
172 4 24 0x1 0x0 /* PE24 periph A */
173 4 25 0x1 0x0 /* PE25 periph A */
174 4 26 0x1 0x0 /* PE26 periph A */
175 4 27 0x1 0x0 /* PE27 periph A */
176 4 28 0x1 0x0 /* PE28 periph A */
177 4 29 0x1 0x0 /* PE29 periph A */
178 4 30 0x1 0x0>; /* PE30 periph A */
181 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
183 <2 20 0x2 0x0 /* PC20 periph B */
184 2 21 0x2 0x0 /* PC21 periph B */
185 2 22 0x2 0x0 /* PC22 periph B */
186 2 23 0x2 0x0 /* PC23 periph B */
187 2 24 0x2 0x0 /* PC24 periph B */
188 2 25 0x2 0x0 /* PC25 periph B */
189 2 27 0x2 0x0 /* PC27 periph B */
190 4 22 0x2 0x0>; /* PE22 periph B */
194 pioA: gpio@fffff200 {
195 compatible = "atmel,at91rm9200-gpio";
196 reg = <0xfffff200 0x200>;
197 interrupts = <2 4 1>;
200 interrupt-controller;
201 #interrupt-cells = <2>;
204 pioB: gpio@fffff400 {
205 compatible = "atmel,at91rm9200-gpio";
206 reg = <0xfffff400 0x200>;
207 interrupts = <3 4 1>;
210 interrupt-controller;
211 #interrupt-cells = <2>;
214 pioC: gpio@fffff600 {
215 compatible = "atmel,at91rm9200-gpio";
216 reg = <0xfffff600 0x200>;
217 interrupts = <4 4 1>;
220 interrupt-controller;
221 #interrupt-cells = <2>;
224 pioD: gpio@fffff800 {
225 compatible = "atmel,at91rm9200-gpio";
226 reg = <0xfffff800 0x200>;
227 interrupts = <4 4 1>;
230 interrupt-controller;
231 #interrupt-cells = <2>;
234 pioE: gpio@fffffa00 {
235 compatible = "atmel,at91rm9200-gpio";
236 reg = <0xfffffa00 0x200>;
237 interrupts = <4 4 1>;
240 interrupt-controller;
241 #interrupt-cells = <2>;
245 dbgu: serial@ffffee00 {
246 compatible = "atmel,at91sam9260-usart";
247 reg = <0xffffee00 0x200>;
248 interrupts = <1 4 7>;
249 pinctrl-names = "default";
250 pinctrl-0 = <&pinctrl_dbgu>;
254 usart0: serial@fff8c000 {
255 compatible = "atmel,at91sam9260-usart";
256 reg = <0xfff8c000 0x200>;
257 interrupts = <7 4 5>;
260 pinctrl-names = "default";
261 pinctrl-0 = <&pinctrl_usart0>;
265 usart1: serial@fff90000 {
266 compatible = "atmel,at91sam9260-usart";
267 reg = <0xfff90000 0x200>;
268 interrupts = <8 4 5>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_usart1>;
276 usart2: serial@fff94000 {
277 compatible = "atmel,at91sam9260-usart";
278 reg = <0xfff94000 0x200>;
279 interrupts = <9 4 5>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_usart2>;
287 macb0: ethernet@fffbc000 {
288 compatible = "cdns,at32ap7000-macb", "cdns,macb";
289 reg = <0xfffbc000 0x100>;
290 interrupts = <21 4 3>;
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_macb_rmii>;
296 usb1: gadget@fff78000 {
297 compatible = "atmel,at91rm9200-udc";
298 reg = <0xfff78000 0x4000>;
299 interrupts = <24 4 2>;
304 compatible = "atmel,at91sam9263-i2c";
305 reg = <0xfff88000 0x100>;
306 interrupts = <13 4 6>;
307 #address-cells = <1>;
313 nand0: nand@40000000 {
314 compatible = "atmel,at91rm9200-nand";
315 #address-cells = <1>;
317 reg = <0x40000000 0x10000000
320 atmel,nand-addr-offset = <21>;
321 atmel,nand-cmd-offset = <22>;
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_nand>;
331 usb0: ohci@00a00000 {
332 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
333 reg = <0x00a00000 0x100000>;
334 interrupts = <29 4 2>;
340 compatible = "i2c-gpio";
341 gpios = <&pioB 4 0 /* sda */
344 i2c-gpio,sda-open-drain;
345 i2c-gpio,scl-open-drain;
346 i2c-gpio,delay-us = <2>; /* ~100 kHz */
347 #address-cells = <1>;