projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
| Commit | Line | Data |
|---|---|---|
| 6fa3eb70 S |
1 | #ifndef _CUST_BAT_H_ |
| 2 | #define _CUST_BAT_H_ | |
| 3 | ||
| 4 | /* stop charging while in talking mode */ | |
| 5 | #define STOP_CHARGING_IN_TAKLING | |
| 6 | #define TALKING_RECHARGE_VOLTAGE 3800 | |
| 7 | #define TALKING_SYNC_TIME 60 | |
| 8 | ||
| 9 | /* Battery Temperature Protection */ | |
| 10 | #define MTK_TEMPERATURE_RECHARGE_SUPPORT | |
| 11 | #define MAX_CHARGE_TEMPERATURE 55 | |
| 12 | #define MAX_CHARGE_TEMPERATURE_MINUS_X_DEGREE 50 //47 Fixed to 50 degree for according to standard | |
| 13 | #define MIN_CHARGE_TEMPERATURE 2 | |
| 14 | #define MIN_CHARGE_TEMPERATURE_PLUS_X_DEGREE 4 //6 Fixed to 2 degree accoding to TCL standard | |
| 15 | #define MAX_LIMIT_CHARGE_TEMPERATURE 45 | |
| 16 | #define MIN_LIMIT_CHARGE_TEMPERATURE 43 | |
| 17 | /* [PLATFORM]-ADD-BEGIN by TCTSZ huichen@tcl.com, 05/21/2015, BATTERY Notify PR-1007717*/ | |
| 18 | #define MAX_RAISING_CHARGE_TEMPERATURE 58 | |
| 19 | #define MIN_DROPPING_CHARGE_TEMPERATURE -18 | |
| 20 | /* [PLATFORM]-ADD-END by TCTSZ huichen@tcl.com*/ | |
| 21 | #define ERR_CHARGE_TEMPERATURE 0xFF | |
| 22 | ||
| 23 | /* Linear Charging Threshold */ | |
| 24 | #define V_PRE2CC_THRES 3400 //mV | |
| 25 | #define V_CC2TOPOFF_THRES 4050 | |
| 26 | #define RECHARGING_VOLTAGE 4110 | |
| 27 | #define CHARGING_FULL_CURRENT 230 //mA | |
| 28 | ||
| 29 | /* Charging Current Setting */ | |
| 30 | //#define CONFIG_USB_IF | |
| 31 | #define USB_CHARGER_CURRENT_SUSPEND 0 // def CONFIG_USB_IF | |
| 32 | #define USB_CHARGER_CURRENT_UNCONFIGURED CHARGE_CURRENT_70_00_MA // 70mA | |
| 33 | #define USB_CHARGER_CURRENT_CONFIGURED CHARGE_CURRENT_500_00_MA // 500mA | |
| 34 | ||
| 35 | #define USB_CHARGER_CURRENT CHARGE_CURRENT_500_00_MA //500mA | |
| 36 | #define AC_CHARGER_CURRENT CHARGE_CURRENT_1000_00_MA | |
| 37 | #define NON_STD_AC_CHARGER_CURRENT CHARGE_CURRENT_1000_00_MA | |
| 38 | #define CHARGING_HOST_CHARGER_CURRENT CHARGE_CURRENT_650_00_MA | |
| 39 | #define APPLE_0_5A_CHARGER_CURRENT CHARGE_CURRENT_500_00_MA | |
| 40 | #define APPLE_1_0A_CHARGER_CURRENT CHARGE_CURRENT_650_00_MA | |
| 41 | #define APPLE_2_1A_CHARGER_CURRENT CHARGE_CURRENT_800_00_MA | |
| 42 | ||
| 43 | ||
| 44 | /* Precise Tunning */ | |
| 45 | #define BATTERY_AVERAGE_DATA_NUMBER 3 | |
| 46 | #define BATTERY_AVERAGE_SIZE 30 | |
| 47 | ||
| 48 | /* charger error check */ | |
| 49 | /* [PLATFORM]-Add-BEGIN by TCTSZ.leo.guo, 04/15/2015, modify ntc temperature function */ | |
| 50 | #define BAT_LOW_TEMP_PROTECT_ENABLE // stop charging if temp < MIN_CHARGE_TEMPERATURE | |
| 51 | /* [PLATFORM]-Add-END by TCTSZ.leo.guo */ | |
| 52 | #define V_CHARGER_ENABLE 0 // 1:ON , 0:OFF | |
| 53 | /* [PLATFORM]-MOD-BEGIN by TCTSZ huichen@tcl.com, 05/18/2015, modify OVP function FR-1005346*/ | |
| 54 | //#define V_CHARGER_MAX 6500 // 6.5 V | |
| 55 | #define V_CHARGER_MAX 6900 // 6.9 V | |
| 56 | /* [PLATFORM]-MOD-END by TCTSZ huichen@tcl.com, 05/18/2015*/ | |
| 57 | #define V_CHARGER_MIN 4400 // 4.4 V | |
| 58 | ||
| 59 | /* Tracking TIME */ | |
| 60 | #define ONEHUNDRED_PERCENT_TRACKING_TIME 10 // 10 second | |
| 61 | #define NPERCENT_TRACKING_TIME 20 // 20 second | |
| 62 | #define SYNC_TO_REAL_TRACKING_TIME 60 // 60 second | |
| 63 | #define V_0PERCENT_TRACKING 3400 //3400mV | |
| 64 | ||
| 65 | /* Battery Notify */ | |
| 66 | #define BATTERY_NOTIFY_CASE_0001_VCHARGER | |
| 67 | #define BATTERY_NOTIFY_CASE_0002_VBATTEMP | |
| 68 | //#define BATTERY_NOTIFY_CASE_0003_ICHARGING | |
| 69 | //#define BATTERY_NOTIFY_CASE_0004_VBAT | |
| 70 | //#define BATTERY_NOTIFY_CASE_0005_TOTAL_CHARGINGTIME | |
| 71 | ||
| 72 | /* JEITA parameter */ | |
| 73 | //#define MTK_JEITA_STANDARD_SUPPORT | |
| 74 | #define CUST_SOC_JEITA_SYNC_TIME 30 | |
| 75 | #define JEITA_RECHARGE_VOLTAGE 4110 // for linear charging | |
| 76 | #define JEITA_TEMP_ABOVE_POS_60_CV_VOLTAGE BATTERY_VOLT_04_100000_V | |
| 77 | #define JEITA_TEMP_POS_45_TO_POS_60_CV_VOLTAGE BATTERY_VOLT_04_100000_V | |
| 78 | #define JEITA_TEMP_POS_10_TO_POS_45_CV_VOLTAGE BATTERY_VOLT_04_200000_V | |
| 79 | #define JEITA_TEMP_POS_0_TO_POS_10_CV_VOLTAGE BATTERY_VOLT_04_100000_V | |
| 80 | #define JEITA_TEMP_NEG_10_TO_POS_0_CV_VOLTAGE BATTERY_VOLT_03_900000_V | |
| 81 | #define JEITA_TEMP_BELOW_NEG_10_CV_VOLTAGE BATTERY_VOLT_03_900000_V | |
| 82 | ||
| 83 | /* For JEITA Linear Charging only */ | |
| 84 | #define JEITA_NEG_10_TO_POS_0_FULL_CURRENT 120 //mA | |
| 85 | #define JEITA_TEMP_POS_45_TO_POS_60_RECHARGE_VOLTAGE 4000 | |
| 86 | #define JEITA_TEMP_POS_10_TO_POS_45_RECHARGE_VOLTAGE 4100 | |
| 87 | #define JEITA_TEMP_POS_0_TO_POS_10_RECHARGE_VOLTAGE 4000 | |
| 88 | #define JEITA_TEMP_NEG_10_TO_POS_0_RECHARGE_VOLTAGE 3800 | |
| 89 | #define JEITA_TEMP_POS_45_TO_POS_60_CC2TOPOFF_THRESHOLD 4050 | |
| 90 | #define JEITA_TEMP_POS_10_TO_POS_45_CC2TOPOFF_THRESHOLD 4050 | |
| 91 | #define JEITA_TEMP_POS_0_TO_POS_10_CC2TOPOFF_THRESHOLD 4050 | |
| 92 | #define JEITA_TEMP_NEG_10_TO_POS_0_CC2TOPOFF_THRESHOLD 3850 | |
| 93 | ||
| 94 | ||
| 95 | #ifdef CONFIG_MTK_FAN5405_SUPPORT | |
| 96 | #define FAN5405_BUSNUM 1 | |
| 97 | #endif | |
| 98 | ||
| 99 | #ifdef CONFIG_MTK_BQ24158_SUPPORT | |
| 100 | #define BQ24158_BUSNUM 1 | |
| 101 | #endif | |
| 102 | ||
| 103 | #ifdef CONFIG_MTK_BQ24296_SUPPORT | |
| 104 | #define BQ24296_BUSNUM 1 | |
| 105 | #endif | |
| 106 | ||
| 107 | #ifdef CONFIG_MTK_BQ24297_SUPPORT | |
| 108 | #define BQ24297_BUSNUM 1 | |
| 109 | #endif | |
| 110 | ||
| 111 | /* High battery support */ | |
| 112 | //#define HIGH_BATTERY_VOLTAGE_SUPPORT | |
| 113 | ||
| 114 | /* Disable Battery check for HQA */ | |
| 115 | #ifdef MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION | |
| 116 | #define CONFIG_DIS_CHECK_BATTERY | |
| 117 | #endif | |
| 118 | ||
| 119 | ||
| 120 | //#define MTK_WIRELESS_CHARGER_SUPPORT 1 | |
| 121 | /* [PLATFORM]-Add-BEGIN by TCTSZ.leo.guo, 04/15/2015, modify ntc temperature function */ | |
| 122 | #define MTK_BATTERY_PROTECT_FEATURE | |
| 123 | /* [PLATFORM]-Add-END by TCTSZ.leo.guo */ | |
| 124 | /* Pump Express support (fast charging) */ | |
| 125 | #ifdef CONFIG_MTK_PUMP_EXPRESS_SUPPORT | |
| 126 | #define TA_START_VCHR_TUNUNG_VOLTAGE 3400 | |
| 127 | #define TA_CHARGING_CURRENT CHARGE_CURRENT_1500_00_MA | |
| 128 | #undef V_CHARGER_MAX | |
| 129 | #ifdef TA_9V_SUPPORT | |
| 130 | #define V_CHARGER_MAX 9500 // 9.5 V | |
| 131 | #else | |
| 132 | #define V_CHARGER_MAX 6000 // 6.0 V | |
| 133 | #endif | |
| 134 | #endif | |
| 135 | ||
| 136 | #endif /* _CUST_BAT_H_ */ |